CyberTAN Technology UIW8001 Wireless IP STB User Manual

CyberTAN Technology Inc. Wireless IP STB Users Manual

Contents

Users Manual

UIW8001 and UIW4001Ultra High-Definition IP Set-Top BoxesInstallation Guide
23ContentsChange the Way You Watch TV ..............................................................................................................................4Identify Your Set-Top Box .............................................................................................................................................4Safety First ..........................................................................................................................................................................5Serial Number ...................................................................................................................................................................5In This Manual ...................................................................................................................................................................5Open Source Software Notification ........................................................................................................................5UIW8001 and UIW4001 Front Panels ...................................................................................................................6UIW8001 and UIW4001 Back Panels.....................................................................................................................7Connecting the Set-Top Box.......................................................................................................................................8Connecting to the In-Home Network ....................................................................................................................9Connection for IPV5050 Wireless Set-Top Box.................................................................................................9Connections for a High-Definition TV (HDTV) ........................................................................................... 10Connections for a Standard-Definition TV (SDTV) .................................................................................... 11Connections for a VCR or DVD Recorder .......................................................................................................12Connections for an Over-the-Air Converter Box ........................................................................................... 12Connecting to an HDTV with an HDMI Connector ....................................................................................13Connecting to an HDTV with a DVI Connector ............................................................................................14Connecting to an HDTV with a Mini-DIN Connector ................................................................................15Connecting to an SDTV with a Mini-DIN Connector .................................................................................16Connecting to a Stereo VCR or DVD Recorder (optional) ...................................................................... 17Troubleshooting .............................................................................................................................................................. 18Frequently Asked Questions ....................................................................................................................................19Picture Formats .............................................................................................................................................................20
45Change the Way You Watch TVWelcome to Internet Protocol Television (IPTV). The UIW8001 and UIW4001 Ultra High-Definition Set-Top Boxes bring a rich, new set of interactive services directly to you through your TV and your in-home IP network.Available services may include some or all of the following features:• Digital Video Recorder (DVR)—Allows you to record your favorite programs so that you can still go to your friend’s house for dinner and not miss your favorite TV show• Pause Live TV—Allows you to pay for the pizza and come back to the show where you left it (Applies to DVR models only)• Ultra high-definition (UHD) - Provides crystal-clear pictures and sound when compared to high-definition (HD) and standard-definition (SD) – you won’t want to watch television any other way once you’ve experienced UHD• Video-On-Demand (VOD)—Gives you access to a robust library of movies and programs that you can watch – when you want to watch themNote: Contact your service provider to find out if the DVR, HD, or VOD services are available and to activate the services.Identify Your Set-Top BoxThis installation guide covers the following set-top box models. Use the following information to identify your model.• UIW4001 set-top box - TV set-top box that supports ultra high-definition (UHD), high-definition (HD) and sandard-definition (SD) video with MPEG2, H.264, and H.265 (HEVC) decoding. Supports 480i, 480p, 576i, and 576p on the analog video ouputs and 720p, 1080i, 1080p24/30/50/60, and 4Kx2Kp24/25/30/50/60 on the HDMI output.• UIW8001 set-top box - The UIW8001 is the same as the UIW4001, but with a 1TB HDD for DVR capability.Safety First Before using the set-top box, read the Important Safety Instructions included in the packaging with thie Set-Top.Serial NumberAt times your service provider may ask for the serial number. To find the serial number for your set-top box, look on the bottom of the set-top box for the label. The serial number is a 9-digit numeric code to the right of the letters “S/N” on the label. Use the space provided here to record the serial number: _______________________________In This ManualThis manual covers the information you need to connect your receiver to both your in-home IP network and your entertainment system. The manual also outlines certain safeguards and installation information. Open Source Software NotificationThis product may contain certain open source software modules which are subject to Open Source Software license terms.A list of the Open Source Software used or provided under this release and their corresponding Licenses and version number are available on Technicolor’s website at the following address: http://www.technicolor.com/en/hi/minisites/open-software or at another address as Technicolor may provide from time to time.If and where applicable, depending on the terms of the applicable Open Source Software licenses, the source codes of the Open Source Software are available for free on Technicolor’s website at the following address: http://www.technicolor.com/en/hi/minisites/open-software.For avoidance of doubt, Open Source Software is only licensed by the original owner of the Open Source Software under the terms set forth in the designated Open Source License.Note: This illustration may vary from the actual product.T16707
67UIW8001 and UIW4001 Front Panel UIW8001 and UIW4001 Back Panel1 WPS button Press to pair with Wireless Access Point.2 Signal Strength Indicator Identifies the strength of the wireless connection.3 Link LED Indicates network link status. The LED is green.4 Bluetooth LED Indicates when a Blutooth Remote is paired with the set-top. The LED is blue.5 REC LED Indicates that a recording is in progress. The LED is red.6 Power Button and LED Powers on the set-top box or places it in standby. The LED is green when on and red when in standby.Note: This illustration may vary from the actual product. CAUTION: Your set-top box may be equipped with a hard disk drive to store programs that you record and to allow you to rewind and pause live TV. Any time the set-top box is powered on (power LED is illuminated) or a recording is in progress (the record LED is illuminated) the hard disk drive is in use.If you need to move the set-top box, complete the following steps to allow the hard disk drive to shut down properly. First, make sure that no recording is in progress (record LED is o). Then, turn o power by pressing the Power switch. Finally, unplug the unit and wait 10 seconds for the hard disk drive to spin down (stop). At this point the unit can be moved safely.You should handle this product with the same level of care that you would use when handling other electronics containing a hard disk drive, such as a laptop computer or other hard disk drive-equipped devices.1 Power Connect the DC output of the AC power adapter (provided) to deliver power to the set-top box. Use only the AC power adapter provided with the set-top box.2 Ethernet Connect to Ethernet (CAT-5) network at your home, if applicable.3 DR Press and release to trigger a disaster recover recovery process.4 Bluetooth Press and release to initiate Bluetooth remote control unit pairing with wireless receiver.5 Optical Connect to an optical cable to send a digital audio signal to a surround sound system or other digital audio device.6 Analog Mini-DIN Alternative method for video and audio connections. Oers analog component, composite, and stereo audio outputs.7 HDMI Connect an HDTV HDMI (High-Definition Multimedia Interface) cable from the HDTV to the HDMI port. HDMI supports both digital audio and video. See page 13 for more information8 USB 3.0 Allows connectivity with USB 3.0 devices.Note: This illustration may vary from the actual product.T167081 2 34 65DRT167091 2 4 5 6 7 63
89Because the connections for a high-definition (HD) or standard-definition (SD) TV are dierent, you must determine if your TV is HD or SD. Your TV must receive HD signals for you to enjoy the benefits of HDTV. See the guide that came with your TV for more information. See page 20 for more information on picture formats.Make one of the following connections for your home network:• If your home network uses Ethernet (CAT-5) cable, use the NETWORK connector on the set-top box. See page 9Connecting the Set-Top BoxTo connect your set-top box to your network and home entertainment devices, complete these steps:Identify the additional consumer electronic devices that you will connect to the set-top box and TV. See page 12 through page 17and see the owner’s manual for the device.Plug the set-top box and the TV into an AC power source that is not controlled by a switch.Make the connections for your TV, VCR, and DVD recorder as follows:• If you are using an HDTV, see page 10 and the connection diagrams in this guide.• If you are using an SDTV, see page 11 and the connection diagrams in this guide.12354Home TheaterOtherDVDVCR916 43orConnecting to the In-Home NetworkThe following diagrams illustrate examples of the connections that you can use to connect your set-top box to your in-home network. Contact your service provider for the recommended connection method for your home.Note: The illustration below may vary from the actual productConnection to Wireless networkThe UIW8001 and UIW4001 set-top box allows for easy and secure establishment of a wireless home network through a Wireless Access Point. The signal strength indicator on the front panel of the set-top box allows you to identify the strength of your wireless connection.T16710Signal StrengthIndicatorDRIn-HomeCAT-5NetworkWallT16711
10 11Connections for a High-Definition TV (HDTV)To use the set-top box with an HDTV, you must make one of the following connections to view the HD content. See the owner’s manual for your TV and the cabling diagrams in this guide for more detailed connection information.Although all connections provide you with quality service, we list the connections in our recommended order.Notes: • The labeling on your set-top box or HDTV may vary slightly from the illustrations shown below • Some cables shown in the connection diagrams may not be included with this set-top box • Set the HD mode and select the output video format (480i, 480p, 720p, 1080i, 1080p) on the set-top box. See page 20 for more information on picture formatsConnections for a Standard-Definition TV (SDTV)When using the set-top box with an SDTV, you must make one of the following connections to view content. Some SDTVs may not have all of these connections. See the owner’s manual for your TV and the cabling diagrams in this guide for more detailed information.Although all connections provide you with quality service, we list the connections in our recommended order.Notes: • The labeling on your set-top box or SDTV may vary slightly from the illustrations shown below • Some cables shown in the connection diagrams may not be included with this set-top boxThe YPbPr (red, blue, and green) connectors can provide standard-definition component video signals to an SDTV. A separate audio connection is also needed.Note: To connect YPbPr to an SDTV, you must select the output video format. See page 20 for more information on picture formats.See the connection diagram on page 16 for an example. SDTV ConnectionsUse One of These Required Connections to an SDTVSet-Top Box ConnectionsThe Video Out connector provides a video connection to an SDTV. A separate audio connection is also needed.See the connection diagram on page 16 for an example. Video OutVIDEOINL RPrPbYL RYPbPrAudio VideoAudio VideoSome HDTVs have a High-Definition Multimedia Interface (HDMI) connector. The HDMI connector provides both a digital video and audio connection. See the connection diagram on page 13 for an example.Note: The HDMI port on the TV must support high-bandwidth digital content protection (HDCP). HDTV ConnectionsThe HDMI connector can provide the connection to an HDTV with a DVI input. If your HDTV has a Digital Visual Interface (DVI) connector, you need an HDMI-to-DVI adapter, and a separate audio connection (either L/R or optical audio).Note: The DVI port on the TV must support high-bandwidth digital content protection (HDCP). See the connection diagram on page 14 for an example.Use One of These Required Connections to an HDTVHDMIHDMIHDMIDVISet-Top Box ConnectionsThe YPbPr (red, blue, and green) connectors provide high-definition component video signals to an HDTV, and a separate audio connection (either L/R or optical audio). See the connection diagram on page 15 for an example.PrPbYAudio/VideoVideoVideoDVI HDMIYPbPrSome HDTVs have only RGB or RGB-HV connectors. If you have one of these HDTVs, you need a Component-to-RGB adapter, and you need a separate audio connection. BGVHRAdapter NeededAdapter NeededVideoRGBAudioL ROPTICALOPTICALINPUTL RAudioOPTICALOPTICALINPUTL RAudioor S/PDIFor S/PDIF
12 13Connections for a VCR or DVD RecorderWhen using the receiver with a VCR or DVD recorder, you must make one of the following connections to view content.Although all connections provide you with quality service, we list the connections in our recommended order.Notes:• The labeling on your receiver, VCR, or DVD recorder may vary slightly from the illustrations shown below.• Some cables shown in the connection diagrams may not be included with this receiver.Connecting to an HDTV with an HDMI ConnectorCable Used in this Configuration• 1 HDMI CableNotes:• The HDMI port on the TV must support high-bandwidth digital content protection (HDCP)• The HDMI interface supports Dolby Digital 5.1 audio WARNING: Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device cables to the set-top box.For VCRs or DVD recorders with Video In and Left and Right audio connectors, use the Video Out and the Audio Out connectors (Left and Right) on the receiver.See the connection diagram on page 17 for an example.VCR/DVD Recorder ConnectionsUse One of These Optional Connections to a VCR or DVD RecorderReceiver ConnectionsVCR/DVD RecorderAudio VideoVIDEOINL RConnections for an Over-the-Air Converter BoxYou can connect an over-the-air converter box directly to your TV to receive certain local channels, but do not connect the over-the-air converter box directly to your set-top box box.Back of Set-Top BoxT16712DRBack of HDTVHDMIAUDIOCENTERCHANNEL INAUDIO INDVI/HDCPANT (75 )INOUTLRANT-1HD 2YOUTANT-2PBPRLRVIDEOL/MONORL/MONORAUDIOINON OFFINHD 1S-VIDEOVIDEO YPBPRLRAUDIOAUDIO
14 15Connecting to an HDTV with a DVI ConnectorCables Used in this Configuration• 1 HDMI-to-DVI cable or 1 HDMI cable and 1 HDMI-to-DVI adapter• 1 Mini-DIN cableNotes:• The DVI port on the TV must support high-bandwidth digital content protection (HDCP)• When you connect the HDMI connector to the DVI connector on your HDTV, you need an HDMI-to-DVI adapter and a separate audio connectionConnecting to an HDTV with a Mini-DIN ConnectorCables Used in this Configuration• 1 Mini-DIN cable (You can also use an optical cable [indicated by the dotted line] instead of the Audio Left/Right Cable as shown in the diagram, dependent upon your TV’s capabilities.) WARNING: Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device cables to the set-top box. WARNING: Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device cables to the set-top box.Back of Set-Top BoxDRBack of HDTVAUDIOCENTERCHANNEL INANT (75 )INOUTANT-1HD 2YOUTANT-2PBPRLRVIDEOL/MONORL/MONORAUDIOINON OFFINHD 1S-VIDEOVIDEO YPBPRLRAUDIOAUDIODVI/HDCPINAUDIO INDVI/HDCPLROPTICALINPUTORT16713T16714Back of HDTVHDMIAUDIOCENTERCHANNEL INAUDIO INDVI/HDCPANT (75 )INOUTLRANT-1HD 2YOUTANT-2PBPRLRVIDEOL/MONORL/MONORAUDIOINON OFFS-VIDEOVIDEOAUDIOINHD 1YPBPRLRAUDIOOPTICALINPUTBack of Set-Top BoxDROR
16 17Connecting to an SDTV with a Mini-DIN ConnectorCables Used in this Configuration• 1 Mini-DIN cableNote: The set-top box must be set to the proper standard-definition mode. WARNING: Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device cables to the set-top box.Connecting to a Stereo VCR or DVD Recorder (optional)The diagram below shows how to connect a recording device to your receiver. Although it is possible to watch TV using a connection through your VCR or DVD recorder to the TV, this connection may not provide the best picture, and HDTV users are restricted to an SD format. In addition, some content is copy protected and passing this content through the recording device may result in a picture that cannot be viewed.For these reasons, the connection shown is best used to provide only video and audio to your recording device and not for normal TV viewing. The connection from the recording device to the TV (only used for playback of recorded material) depends on the type of device being used, the outputs that are supported, and the inputs that remain available for use on your TV.Consult the owner’s manuals provided with your TV and recording device for more details on connection options.Cables Used in this Configuration• 1 Mini-DIN cableConnecting your TV directly to the Audio/Vido output of your set-top box will assure a more vivid picture and enhance your viewing enjoyment. WARNING: Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device cables to the set-top box.Back of SDTVCABLE OUT/ANT OUTCABLE IN/ANT INRLAUDIOINVIDEOINRLAUDIOOUTVIDEOOUTYPBPRBack of Set-Top BoxDRT16715Back of Stereo VCRor DVD RecorderRLAUDIOINVIDEOINCABLE OUT/ANT OUTRLAUDIOOUTVIDEOOUTCABLE IN/ANT INBack of Set-TopDRT16716
18 19TroubleshootingIf the set-top box does not perform as expected, the following tips may help. If you need further assistance, contact your service provider.No Picture• Verify that the power to your TV is turned on• If the set-top box is plugged into a wall switch, verify that the switch is in the ON position• Verify that all cables are properly connected• If your system includes a VCR, DVD recorder, or stereo, verify that you have properly connected the device to the set-top box• Verify that you are using the proper input selection to the home theater set-top box or TV• Verify that the set-top box is set to the proper screen type and resolution• If you are using coaxial cable to connect to your TV, verify that the TV is tuned to the channel designated by your service provider (usually channel 3). Contact your service provider for the channel informationNo Color or Incorrect Color• Verify that the current TV program is broadcast in color• Adjust the TV color controls• If you are using a component video connection (YPbPr), check that all connectors are completely and properly plugged into the set-top box and TV• If you are using a component video connection (YPbPr) and your HDTV has only RGB or RGB-HV connectors, you must use an adapter. You can obtain the adapter through an electronic parts retailerNo Sound• If your setup includes a VCR, DVD recorder, or stereo, verify that you have properly connected the device to the set-top box• Verify that the volume is turned up• Verify that the mute function is not on• Verify the proper input selection to the home theater set-top box or TV• If you are using coaxial cable to connect to your TV, verify that the TV is tuned to the correct channelFrequently Asked QuestionsWhat Is Digital Television?Digital television (DTV) is a huge leap forward in television technology compared to analog television that has been widely available since the 1940s. DTV is delivered and displayed using digital encoding, similar to the way a PC operates. By using digital technology, there is no variation in picture and sound quality from the origination point until it is displayed on your television. You always receive a high-quality picture without the wavy lines or static you might sometimes get from a weak analog signal. Another feature of digital television is digital surround sound using Dolby Digital technology, which is the same technology used to produce the sound you hear in movie theaters.What Is Standard-Definition Television?Standard-definition television (SDTV) is a television system that uses a resolution that is not considered to be high-definition television (HDTV 720p, 1080i, and 1080p). The two common SDTV signal types are 576i, with 576 interlaced lines of resolution, derived from the European-developed PAL and SECAM systems; and 480i, with 480 interlaced lines of resolution, based on the American National Television System Committee (NTSC) system.In North America, digital SDTV is broadcast in the same 4:3 aspect ratio as NTSC signals. In other parts of the world that used the PAL or SECAM color systems, standard-definition television is now usually shown with a 16:9 aspect ratio. What Is High-Definition Television?High-Definition Television (HDTV) is a high-quality video standard developed to replace older video formats often referred to as SDTV (Standard-definition television). While HDTV’s video quality is one of the most noticeable improvements over SDTV, HDTV includes a number of other important improvements as well.First of all instead of an analog signal, used by traditional NTSC broadcasts, HDTV is always digital. This eliminates analog interference caused be electrical currents and magnetic fields. Secondly, HDTV uses a dierent aspect ratio than SDTV. While previous broadcasts used a 4:3 ratio, HDTV uses a ratio of 16:9. This wider aspect ratio more closely emulates how humans see the world, making the image appear more realistic. This ratio is also better for watching widescreen movies, which are recorded in widescreen for the same reason. HDTV signals are either 720p, 1080i or 1080p.Are Local TV Stations or Other Programmers Broadcasting in HDTV?Many local TV stations and programmers are transmitting digital signals. However, transmitting a digital signal does not mean transmitting an HDTV signal. Some stations are using the new bandwidth to broadcast several standard-definition channels. Most stations and programmers, once they begin broadcasting in digital, are oering HD content from their parent network (for example, CBS, ABC, NBC, Fox, and PBS). Contact your service provider for more information.Why Aren’t All of the Shows that I Watch in High-Definition?A high-definition program must originate in HD format and be broadcast in HD format. Having an HDTV system does not mean that everything you watch will be viewed in high-definition. Getting the signal from a digital source also does not mean it is high-definition.What Is HDMI and Does it Support Dolby Digital 5.1 Audio?The High-Definition Multimedia Interface (HDMI) is an uncompressed, all-digital audio/video interface. The Dolby Digital audio format that provides up to 5.1 separate channels of surround sound, and is the standard used for DVD-Video. HDMI supports standard, enhanced, or high-definition video, plus multi-channel digital audio, such as Dolby Digital audio, on a single cable.
20Picture FormatsWhat Is the Dierence Between a Standard-Screen and a Wide-Screen HDTV?The type of screen your HDTV has (wide-screen or standard-screen) determines how the set-top box displays programs on the screen. The picture format for an HDTV is a combination of aspect ratio and screen resolution and is dierent for standard-screen and wide-screen HDTVs.What Is Aspect Ratio?An aspect ratio is the ratio of the width to the height of the TV screen. The aspect ratios dier because the television industry manufactures both standard-screen and wide-screen HDTVs to appeal to consumer viewing preferences. What Is the Screen Resolution?The screen resolution indicates the amount of detail that the picture displays. Resolution is identified by the number of display lines on the screen. The techniques that an HDTV uses to “paint” the picture on the screen are referred to as progressive and interlaced.With the progressive scanning method, the lines are drawn on the screen one at a time in sequential order. Progressive scanning results in a more detailed image on the screen and is also less susceptible to the flicker commonly associated with interlaced scanning. The interlaced method involves refreshing pixels in alternation — first the odd lines and then the even lines. For advanced setup, select the screen resolution that your TV can support. See your HDTV user manuals to choose the proper screen resolution (480i, 576i, 720p, 1080i, or 1080p) for your setup. For example, a screen resolution of 1080i indicates that the screen shows 1080 lines in an interlaced display, and 720p indicates that the screens shows 720 lines in a progressive display.A standard-screen SDTV has a 4x3 aspect ratio. The screen is 4 units wide for every 3 units tall. A wide-screen HDTV is one-third wider than a standard-screen HDTV. The screen is 16 units wide for every 9 units tall.A screen resolution of 480i or 516i fills the screen.A screen resolution of 720p or 1080i fills the screen.91643TECHNICOLOR1-5, rue Jeanne d’Arc92130 Issy-les-MoulineauxFrancewww.technicolor.comCopyright 2016 Technicolor. All rights reserved. All tradenames referenced are service marks, trademarks, or registered trademarks of their respec-tive companies. Specifications subject to change without notice.DMS3-CTC-25-XXX v1.0Trademark and License InformationRovi DisclaimerTechnicolor will not be responsible for any licensing fees payable to Rovi Corporation, and Technicolor will not have any indemnification obligations relating to any claims asserted by Rovi Corporation, or by any entity controlled by, controlling, or under common control with Rovi Corporation (“Rovi Entities”), or any entity used to license intellectual property of the Rovi Entities, and the successors and assigns of the foregoing entities, including any claim related to electronic programming guides alone or in combination with any equipment provided by Technicolor.DolbyManufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.HDMIThe terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
TECHNICOLOR1-5 rue Jeanne d’Arc92130 Issy-les-MoulineauxFrancewww.technicolor.com*37542270*37542270Copyright 2016 Technicolor. All rights reserved. All tradenames referenced are service marks, trademarks, or registered trademarks of their respective companies. Specifications subject to change without notice.DMS3-SAF-25-381 v1.0. SAFETY INSTRUCTIONS AND REGULATORY NOTICESBEFORE YOU START INSTALLATION OF OR USE THIS PRODUCT, CAREFULLY READ THESE INSTRUCTIONSApplicabilityThese Safety Instructions and Regulatory Notices apply to:• Technicolor Set-Top BoxesImportant Safety Instructions1Read these instructions.2Keep these instructions.3Heed all warnings.4Follow all instructions.5Do not use this apparatus near water.6Clean only with dry cloth.7Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11 Only use attachments/accessories specified by the manufacturer.12Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13Unplug this apparatus during lightning storms or when unused for long periods of time.14Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.!When using this product, always follow the basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following:• Always install the product as described in the documentation that is included with your product.• Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.• Do not use this product to report a gas leak in the vicinity of the leak.
SymbolsFollowing symbols may be found in this and accompanying documentation as well as on the product or accompanying accessories:DirectiveUnless express and prior approval by Technicolor in writing, you may not:• Disassemble, de-compile, reverse engineer, trace or otherwise analyze the equipment, its content, operation, or functionality, or otherwise attempt to derive source code (or the underlying ideas, algorithms, structure or organization) from the equipment, or from any other information provided by Technicolor, except to the extent that this restriction is expressly prohibited by local law;• Copy, rent, loan, re-sell, sub-license, or otherwise transfer or distribute the equipment to others;• Modify, adapt or create a derivative work of the equipment;• Remove from any copies of the equipment any product identification, copyright or other notices;• Disseminate performance information or analysis (including, without limitation, benchmarks) from any source relating to the equipment.Such acts not expressly approved by Technicolor will result in the loss of product warranty and may invalidate the user's authority to operate this equipment. Technicolor disclaims all responsibility in the event of use that does not comply with the present instructions.Open Source Software notificationThis product may contain certain open source software modules which are subject to Open Source Software license terms. A list of the Open Source Software used by or provided under this product release and their corresponding Licenses and version number are available on Technicolor's website at the following address: www.technicolor.com/en/hi/minisites/open-software or at another address as Technicolor may provide from time to time.If and where applicable, depending on the terms of the applicable Open Source Software licenses, the source codes of the Open Source Software are available for free on Technicolor's website at the following address: www.technicolor.com/en/hi/minisites/open-software.For avoidance of doubt, Open Source Software is only licensed by the original owner of the Open Source Software under the terms set forth in the designated Open Source License.Software and Firmware UseThe software described in this document is protected by copyright law and furnished to you under a license agreement. You may only use or copy this software in accordance with the terms of your license agreement.The firmware in this equipment is protected by copyright law. You may only use the firmware in the equipment in which it is provided. Any reproduction or distribution of this firmware, or any portion of it, without express written consent from Technicolor is prohibited.Symbol IndicationThis symbol is intended to alert you that uninsulated voltage within this product may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this product.This symbol is intended to alert you of the presence of important operating and maintenance (servicing) instructions in the documentation accompanying this product.This symbol indicates for indoor use only (IEC 60417-5957).This symbol indicates Double insulated Class II equipment (IEC 60417-5172). Does not require an earth connection.This symbol indicates Alternating Current (AC).This symbol indicates Direct Current (DC).This symbol indicates Electrical polarity.This symbol indicates Fuse.!
Environmental informationEnergy efficiencyEnergy savings - We have a role to play…The accompanying product documentation not only provides useful information on all the features of your product, but also on its energy consumption. We strongly encourage you to carefully read the product documentation before putting your equipment in service in order to get the best service it can offer you.By working together, we can reduce the impact we have on our earth!Batteries (if applicable)Batteries use some hazardous substances which pollute the environment. Do not dispose of them with other articles. Take care to dispose them at special collecting points.Recycle or dispose of batteries in accordance with the battery manufacturer’s instructions and local/national disposal and recycling regulations.Safety instructionsClimatic conditionsThis product:• Is intended for in-house stationary use; the maximum ambient temperature must not exceed 40 °C (104 °F); the relative humidity must be between 20 and 80 %.• Must not be mounted in a location exposed to direct or excessive solar and/or heat radiation.• Must not be exposed to heat trap conditions and must not be subjected to water or condensation.• Must be installed in a Pollution Degree 2 environment (an environment where there is no pollution or only dry, non-conductive pollution).If applicable, batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like.Ventilation and positioningThis equipment is intended to be used indoor in a residential or office environment.• Remove all packaging material before applying power to the product.• Place and use the product only in positions as described in the accompanying product documentation.• Do not block or cover any ventilation openings; never stand it on soft furnishings or carpets.• Never push objects through the openings in this product.• Leave 7 to 10 cm (3 to 4 inches) around the product to ensure that proper ventilation gets to it.• Do not install the product near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.• Do not put anything on it which might spill or drip into it (for example, lighted candles or containers of liquids). Do not expose it to dripping or splashing, rain or moisture. If a liquid enters inside the product, or if the product has been exposed to rain or moisture, unplug it immediately and contact the Customer Service.CleaningUnplug this product from the wall socket and disconnect from all other devices before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.Water and moistureDo not use this product near water, for example near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool. Transition of the product from a cold environment to a hot one may cause condensation on some of its internal parts. Allow it to dry by itself before re-starting the product.Electrical poweringThe powering of the product must adhere to the power specifications indicated on the marking labels.In case this product is powered by a power supply unit:• This power supply unit must be Class II and a Limited Power Source in accordance with the requirements of IEC 60950-1/EN 60950-1, Technicolor is proud to offer you high-standard products with a variety of eco-friendly attributes. Next to carefully selected plastics and packaging to minimize our ecological footprint, our products benefit from a unique combination of hardware and software features that reduce energy consumption substantially.!• Read these instructions.• Keep these instructions.• Heed all warnings.• Follow all instructions.
Clause 2.5 and rated as indicated on the label on your product. It must be tested and approved to national, or local standards.•For US and Canada: This product is intended to be supplied by a UL listed Direct Plug-in Power Unit marked "Class 2" and rated as indicated on the label on your product.Only use the power supply unit that is supplied with this product. The use of other types of supplies is prohibited. If you are not sure of the type of power supply needed, consult the product's user documentation or contact your local product dealer.AccessibilityThe plug on the power supply cord or power supply unit serves as disconnect device. Be sure that the mains supply socket outlet you use is easily accessible and located as close to the product as possible.The power connections to the product and the mains supply socket outlet socket must be accessible at all times, so that you always can disconnect the product quickly and safely from the mains supply.OverloadingDo not overload mains supply socket outlets and extension power cords as this increases the risk of fire or electric shock.Handling batteriesThis product (or its remote control) may contain disposable batteries.• Insert batteries correctly. There may be a risk of explosion if the batteries are incorrectly inserted.• Do not attempt to recharge ‘disposable’ or ‘non-reusable’ batteries.• Please follow instructions provided for charging ‘rechargeable’ batteries.• Replace batteries with the same or equivalent type.• Do not expose batteries to excessive heat (such as sunlight or fire) and to temperatures above 100 °C (212 °F).Coin/button cell batteriesCable DistributionFor this apparatus, the cable shield/screen shall be grounded (earthed) as close as practical to the point of entry of the cable into the building.For products sold in the US and Canada, this reminder is provided to call the system installer's attention to ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable (or Canadian Electrical Code Part 1).Limiting the human body exposure to electromagnetic fieldsThis product should be installed and operated at least 20 cm (8 inches) or more away from a person’s body.ServicingTo reduce the risk of electric shock, do not disassemble this product. None of its internal parts are user-replaceable; therefore, there is no reason to access the interior. Opening or removing covers may expose you to dangerous voltages. Incorrect reassembly could cause electric shock if the appliance is subsequently used.If service or repair work is required, take it to a qualified service dealer.Damage requiring serviceUnplug this product from the mains supply socket outlet and refer servicing to qualified service personnel under the following conditions:• When the power supply, power cord or its plug are damaged.• When the attached cords are damaged or frayed.• If liquid has been spilled into the product.!CAUTIONThere is danger of explosion if the battery is mishandled or incorrectly replaced. Replace only with the same or equivalent type of battery. Do not disassemble it or attempt to recharge it outside the system. Do not crush, puncture, dispose of in fire, short the external contacts, or expose to water or other liquids.!CAUTIONDo not ingest coin or button cell batteries!Chemical Burn HazardThis product or remote control supplied with this product may contains a coin/button cell battery. If the coin/button battery is swallowed, it can cause severe internal burns in just 2 hours and lead to death.Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• If the product has been exposed to rain or water.• If the product does not operate normally.• If the product has been dropped or damaged in any way.• There are noticeable signs of overheating.• If the product exhibits a distinct change in performance.Immediately disconnect the product if you notice it giving off a smell of burning or smoke. Under no circumstances must you open the equipment yourself; you run the risk of electrocution.Protect the product when moving itAlways disconnect the power source when moving the product or connecting or disconnecting cables.Interface classifications (upon applicability)The external interfaces of the product are classified as follows:• Cable: TNV circuit, not subjected to overvoltages (TNV-1)• MoCA, HPNA, RF: TNV circuit, not subjected to overvoltages (TNV-1)• All other interface ports (e.g. HDMI, analog audio / video, Ethernet, USB,...), including the low voltage power input from the AC mains power supply: SELV circuits.Regulatory informationYou must install and use this device in strict accordance with the manufacturer's instructions as described in the user documentation that is included with your product.Before you start installation or use of this product, carefully read the contents of this document for device specific constraints or rules that may apply in the country where you want to use this product.In some situations or environments, the use of wireless devices may be restricted by the proprietor of the building or responsible representatives of the organization.If you are uncertain of the policy that applies on the use of wireless equipment in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use this device prior to turning on the equipment.Technicolor is not responsible for any radio or television interference caused by unauthorized modification of the device, or the substitution or attachment of connecting cables and equipment other than specified by Technicolor. The correction of interference caused by such unauthorized modification, substitution or attachment will be the responsibility of the user.Technicolor and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from failing to comply with these guidelines.North-America - CanadaNotification of Canadian Radio Frequency Interference StatementThis Class B digital apparatus complies with Canadian ICES-003.This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.Canada - Industry Canada (IC)In case this product is equipped with a wireless transceiver, this device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.Canada - Radiation exposure statementThis equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (8 inches) between the radiator and your body.Restricted frequency bandsIn case this product is equipped with a wireless transceiver operating in the 2.4 GHz band, it may only use channels 1 to 11 (2412 to 2462 MHz) on Canada territory.In case this product is equipped with a wireless transceiver operating in the 5 GHz band, it is for indoor use only.The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.North-America - United States of AmericaImportant safety instructions• The cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820,93, Grounding of outer Conductive Shield of a Coaxial Cable.• Leave 5 to 8 cm (2 to 3 inches) around the product to ensure proper ventilation to it.• Never push objects through the openings in this product.Federal Communications Commission (FCC) radio frequency interference statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.Responsible Party: Technicolor, 101W. 103rd St., Indianapolis, IN 46290 USA, 317-587-5466.RF exposure statementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instruction as documented in the product documentation.When the product is equipped with a wireless interface, then it becomes a mobile or fixed mounted modular transmitter and must have a separation distance of at least 20 cm (8 inches) between the antenna and the body of the user or nearby persons. In practice, this means that the user or nearby persons must have a distance of at least 20 cm (8 inches) from the product and must not lean on the product in case it is wall-mounted.With a separation distance of 20 cm (8 inches) or more, the M(aximum) P(ermissible) E(xposure) limits are well above the potential this wireless interface is capable to produce.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Restricted frequency bandsIn case this product is equipped with a wireless transceiver operating in the 2.4 GHz band, it may only use channels 1 to 11 (2412 to 2462 MHz) on U.S.A. territory.In case this product is equipped with a wireless transceiver operating in the 5 GHz band, it meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Si le produit est équipé d'un émetteur-récepteur sans fil fonctionnant dans la bande des 2.4 GHz, il utilise uniquement les canaux 1 à 11 (2 412 à 2 462 MHz) sur le territoire canadien.Si le produit est équipé d'un émetteur-récepteur sans fil fonctionnant dans la bande des 5 GHz, il peut uniquement être utilisé dans un environnement intérieur.La disponibilité de certains canaux spécifiques et / ou bandes de fréquences de fonctionnement sont en fonction du pays et sont firmware programmé en usine pour correspondre à la destination prévue. Le réglage du firmware n’est pas accessible par l’utilisateur.
ne peut être remplacée par un non-professionnel; il n'y a dès lors pas de raison de l'ouvrir. L'ouverture ou le retrait des couvercles peut vous exposer à des tensions dangereuses. Un remontage incorrect peut entraîner un choc électrique lors de l’utilisation suivante.Si votre appareil doit être réparé ou révisé, confiez-le à un distributeur agréé.Détérioration nécessitant une interventionDébranchez ce produit de la prise murale et faites effectuer la réparation par un service après-ventequalifié dans les cas suivants :• Si l'alimentation ou sa fiche sont endommagées.• Si un des câbles fournis est endommagé ou effiloché.• Si vous avez renversé du liquide dans le produit.• Si le produit a été exposé à la pluie ou à de l'eau.• Si le produit ne fonctionne pas normalement.• Si le produit est tombé ou a été endommagé d'une façon quelconque.• S’il y a un signe perceptible de surchauffe.• Si le produit présente des variations importantes au niveau des performances.Débranchez immédiatement le produit si vous remarquez qu'il s'en dégage une odeur de brûlé ou de la fumée. Vous ne devez en aucun cas ouvrir l'appareil vous-même car vous risquez d'être électrocuté.Protection du produit lors de son déplacementDébranchez toujours le produit de sa source d'alimentation lorsque vous le déplacez ou lorsque vous branchez ou débranchez des câbles.Classification des interfaces (sur l'applicabilité)Les interfaces externes du produit sont spécifiées comme suit :• Cable (câble) : circuit TRT, non sujet à des surtensions (TRT-1)• MoCA, HPNA, RF : circuit TRT, non sujet à des surtensions (TRT-1)• Tous les autres ports d'interface (par example, HDMI, audio / vidéo analogique, Ethernet, USB, etc.) y compris l'entrée d'alimentation basse tension depuis l'alimentation du réseau : circuits TBTSAvis réglementaireL’appareil doit être installé et utilisé en stricte conformité avec les instructions du fabricant, énoncées dans la documentation accompagnant le produit.Avant d’installer ou d’utiliser le produit, lisez attentivement ce document afin de prendre connaissance des restrictions spécifiques à l’appareil ou des règles en vigueur dans le pays où vous comptez l’utiliser.Dans certains environnements ou circonstances, l’emploi de dispositifs sans fil peut être prohibé par le propriétaire du bâtiment ou les représentants responsables de l’organisation concernée.En cas de doute quant à la politique s’appliquant à l’utilisation d’équipements sans fil dans une organisation ou un environnement spécifique (par exemple dans les aéroports), il est recommandé de demander la permission d’utiliser l’appareil avant de l’allumer.Technicolor n’est pas responsable des interférences avec les postes de radio ou de télévision susceptibles de survenir à la suite d’une modification non autorisée de l’appareil ou du remplacement ou de la connexion de câbles et d’équipements non agréés par Technicolor. C’est par conséquent à l’utilisateur qu’il incombe de remédier aux interférences causées par de telles manipulations.Technicolor et ses revendeurs et distributeurs agréés déclinent toute responsabilité quant aux dommages ou violation des réglementations nationales découlant du non-respect de ces instructions.Amérique du Nord – CanadaDéclaration Canadienne d’interférence de Fréquence RadioCet appareil numérique de Classe B est conforme à la norme canadienne NMB-003.Le présent produit est conforme aux spécifications techniques applicables d'Innovation, Sciences et Développement Économique Canada.Canada - Industrie Canada (IC)Si le produit est équipé d'un émetteur-récepteur sans fil, il est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage; (2) l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.Canada - Avis radiation énoncéesCet équipement est conforme avec les limites d’exposition aux radiations IC énoncées pour un environnement incontrôlé. Il doit être installé et opéré avec une distance minimale de 20 cm (8 pouces) entre la source de radiation et votre corps.Bandes de fréquences restreintes
Alimentation électriqueL'alimentation du produit doit respecter les spécifications en matière d'alimentation figurant sur les étiquettes.Dans le cas où ce produit est alimenté par un bloc d'alimentation :• L'alimentation doit être de classe II, être une source à puissance limitée conformément aux exigences de la norme CEI 60950-1/ EN 60950-1, clause 2.5, aux caractéristiques nominales comme indiquées sur l’étiquette fixée sur le produit. Elle doit être testée et répondre aux normes nationales ou locales.•Pour États-Unis et Canada : Ce produit est destiné à être alimenté par une source d'alimentation directe certifiée UL de «Classe 2» et considéré comme indiqué sur l'étiquette de votre produit.Utilisez uniquement le bloc d'alimentation livré avec votre produit. L'utilisation d'autres types de sources d'énergie est interdite. Si vous n'êtes pas certain du type d'alimentation nécessaire, veuillez consulter la documentation fournie avec le produit ou contacter votre revendeur local.AccessibilitéL'alimentation électrique est un moyen de déconnecter ce produit. Assurez-vous donc que le socle de la prise dans laquelle vous branchez le cordon d'alimentation est facilement accessible, et est située le plus près possible de l'équipement.Les connexions d'alimentation au produit et la prise d'alimentation doit être accessible à tout moment, de sorte que vous pouvez toujours déconnecter le produit rapidement et en toute sécurité de l'alimentation.SurchargeNe surchargez pas les prises du réseau d'alimentation ni les rallonges car ceci augmente les risques d'incendie et de choc électrique.Manipulation des pilesCe produit (ou sa télécommande) peuvent contenir des piles jetables.• Insérez les piles correctement. Il existe un risque d'explosion si les piles ne sont pas insérées correctement.• N'essayez pas de recharger des piles «jetables» ou «non rechargeables».• Veuillez suivre les instructions fournies concernant la charge de piles «rechargeables».• Remplacez les piles uniquement par des piles identiques ou équivalentes.• N'exposez pas les piles à une chaleur excessive (à la chaleur du soleil ou au feu, par exemple) et des températures supérieures à 100 °C (212 °F).Piles boutonDistribution par câbleLe blindage du câble coaxial de cet appareil doit être relié à la terre le plus près possible du point d’entrée du câble dans le bâtiment..En ce qui concerne les produits vendus au Canada, ce rappel vise à attirer l'attention de l'installateur du système sur ANSI/NFPA 70, National Electrical Code (NEC), en particulier l'article 820.93 (ou Code canadien de l'électricité, partie 1), qui fournissent les instructions pour une mise à la terre correcte de la protection du câble coaxial.Limiter l'exposition du corps humain aux champs électromagnétiquesCet produit doit être installé et opéré avec une distance minimale de 20 cm (8 pouces) entre la source de radiation et votre corps.EntretienPour réduire les risques de choc électrique, ne démontez pas ce produit. Aucune de ses pièces internes!AVERTISSEMENTIl existe un risque d'explosion si les piles ne sont pas correctement manipulées ouremplacées. Ne remplacez les piles que par des piles de même type. Ne démontez pas et ne tentez pas de recharger les piles hors du système. N'écrasez pas les piles, ne les percez pas, ne les jetez pas au feu, ne courtcircuitezpas les contacts externes et ne les exposez pas à l'eau ou à d'autres matières liquides.!AVERTISSEMENTNe pas ingérer la pile!Danger de brûlure chimiqueCe produit, ou la télécommande fournie avec ce produit contient une pile bouton. Si la pile bouton est avalée, elle peut provoquer de graves brûlures internes en 2 heures seulement et peut entrainer la mort.Conserver les piles neuves et usées hors des portée des enfants. Si le compartiment pile ne se ferme pas correctement, cesser d’utiliser le produit et tenir hors de portée des enfants.En cas de doute concernant le fait que les piles pourraient avoir été avalées ou introduites dans une partie quelconque du corps, consulter immédiatement un médecin.
EnvironnementEfficacité énergétiqueÉconomies d'énergie – Vous avez un rôle à jouer...La documentation du produit qui accompagne non seulement fournit des informations utiles sur toutes les caractéristiques de votre produit, mais aussi sur sa consommation d'énergie. Nous vous encourageons fortement à lire attentivement la documentation du produit avant de mettre votre matériel en service afin d'obtenir le meilleur service qu'il peut vous offrir.Ensemble, nous pouvons réduire l'impact de nos activités sur la planète!Batteries (le cas échéant)Les batteries utilisent des substances dangereuses qui polluent l'environnement. Ne les jetez pas avec d'autres articles. Prenez soin de les disposer aux points de collecte spéciaux.Recyclez ou mettez au rebut les piles conformément aux instructions de leur fabricant et/ou aux règlementations locales ou nationales applicables en la matière.Consignes de sécuritéConditions climatiquesCe produit :• Est conçu pour une utilisation fixe dans un bureau à une température ambiante maximale de 40 °C (104 °F); l'humidité relative doit être comprise entre 20 et 80 %.• Ne doit pas être installé dans un endroit exposé au rayonnement direct et excessif du soleil et/ou à des radiations de chaleur.• Ne doit pas être mis dans des conditions d'accumulation de chaleur et ne doit pas être soumis à l'humidité ou la condensation.• Doit être installé dans un environnement présentant un degré de pollution 2 (environnement exempt de pollution ou avec une pollution sèche, non conductrice).Le cas échéant, les piles (pack de piles ou piles installées) ne doivent pas être exposées à une chaleur excessive comme le soleil, un feu ou similaire.Ventilation et positionnementCet équipement est destiné à être utilisé à l'intérieur dans un environnement résidentiel ou bureau.• Retirez l'intégralité de l'emballage avant de brancher le produit.• Placer et utiliser le produit uniquement dans des positions comme décrit dans la documentation du produit d'accompagnement.• Ne pas obstruer les ouvertures de ventilation; ne jamais se tenir sur des tissus d'ameublement et les tapis.• Ne jamais pousser des objets dans les ouvertures de ce produit.• Laisser 7 à 10 cm (3 à 4 pouces) autour du produit afin d'assurer une bonne ventilation.• Ne pas installer le produit à proximité de sources de chaleur telles que des radiateurs, poêles ou autres appareils (y compris les amplificateurs) qui produisent de la chaleur.• Ne mettez rien sur lui qui pourrait renverser ou goutte à goutte dans le (par exemple, des bougies ou des contenants de liquides allumée). Ne pas l'exposer à des gouttes ou des éclaboussures, de la pluie ou de l'humidité. Si un liquide pénètre à l'intérieur du produit, ou si le produit a été exposé à la pluie ou à l'humidité, débranchez-le immédiatement et contactez le service après-vente.NettoyageDébranchez le produit de la prise murale et se déconnecter de tous les autres appareils avant de le nettoyer. N'utilisez pas de détergents liquides ou d'aérosols. Nettoyez-le avec un chiffon humide.Eau et humiditéN'utilisez pas ce produit à proximité d'une arrivée d'eau, par exemple près d'une baignoire, d'un lavabo,d'un évier, d'une machine à laver, dans un sous-sol humide ou près d'une piscine. Le transfert de ce produit d'un environnement froid vers un environnement chaud peut entraîner l'apparition de condensation sur certaines parties internes. Laissez l'appareil sécher avant de le remettre en marche.Technicolor est fier de vous offrir des produits de haute-standard avec une variété d'attributs écologiques. A côté de soigneusement sélectionnés plastiques et emballages pour minimiser notre empreinte écologique, nos produits bénéficient d'une combinaison unique de fonctionnalités matérielles et logicielles qui permettent de réduire considérablement la consommation d'énergie.!• Lisez ces instructions.• Conservez ces instructions.• Respectez tous les avertissements.• Suivez toutes les instructions.
que sur le produit ou les accessoires d'accompagnement :Consignes à respecterSauf accord écrit explicite et préalable de Technicolor, vous ne pouvez pas :• démonter, décompiler, décomposer, examiner ou analyser de quelque manière que ce soit l'appareil, son contenu, son fonctionnement ou ses fonctionnalités, ni tenter de copier le code source (ou les concepts sous-jacents, les algorithmes, la structure ou l'organisation) de l'appareil, ou de toute autre information fournie par Technicolor, sauf si cette restriction est expressément interdite par la législation locale;• copier, louer, prêter, revendre, mettre sous licence, ni transférer ou distribuer l'appareil à des tiers;• modifier, adapter ou créer un dérivé de l'appareil;• retirer de l'appareil l'identification du produit, les droits d'auteur ou toute autre notification;• diffuser des informations ou analyses relatives aux performances de l'appareil (y compris et sans restriction, les tests de performance) quelle que soit la source d'information.Ces actes, réalisés sans l'accord explicite de Technicolor, entraînent la perte de la garantie du produit et enlèvent à l'utilisateur le droit d'employer l'équipement. Technicolor rejette toute responsabilité en cas d'utilisation de l'équipement non conforme aux présentes instructions.Notice relative aux Logiciels LibresCe produit logiciel peut contenir des éléments (modules ou bibliothèques logiciels) publiés sous licence « Logiciels libres » (« open source »). Ces composants logiciels peuvent être modifiés dans les prochaines versions logicielles. Vous trouverez la liste des logiciels libres embarqués dans ce produit logiciel, ainsi que leur licence et version sur le site Technicolor à l’adresse suivante : www.technicolor.com/en/hi/minisites/open-software, ou à toute autre adresse URL que Technicolor pourrait fournir dans le futur.En fonction des termes et conditions d’utilisation applicables à ces éléments logiciels (les licences de logiciel libre en cause), le code source de ces modules ou bibliothèques logiciels seront mis à disposition sur le site de Technicolor, à l’adresse suivante : www.technicolor.com/en/hi/minisites/open-software, ou à toute autre adresse URL que Technicolor pourrait fournir dans le futur.En tout état de cause, les logiciels libres sont licenciés directement par l’auteur original de ces composants logiciels, dans les termes de la licence de logiciel libre correspondante.Utilisation du logiciel et du micrologicielLe logiciel décrit dans ce document est protégé par la loi sur les droits d’auteur et vous est fourni dans le cadre d’un contrat de licence. Vous pouvez utiliser ou copier ce logiciel en respectant les modalités de votre contrat de licence.Le micrologiciel de cet équipement est protégé par la loi sur la protection des droits d’auteur. Il ne peut être utilisé qu’avec l’équipement dans lequel il est fourni. Toute reproduction ou distribution de l’ensemble ou d’une partie de ce micrologiciel sans autorisation écrite explicite de Technicolor est interdite.Symbol IndicationCe symbole a pour but d’alerter toute personne qu’un contact avec une pièce interne de ce produit, sous tension et non isolée, pourrait être suffisant pour provoquer un choc électrique. Il est donc dangereux d’être en contact avec toute pièce interne de ce produit.Ce symbole a pour but de’ avertir qu’une documentation importante sur le fonctionnement et l’entretien accompagne ce produit.Ce symbole indique pour une utilisation en intérieur (IEC 60417-5957).Ce symbole indique équipement de la classe II double isolé (IEC 60417-5172). Ne nécessite pas une connexion de terre.Ce symbole indique le courant alternant (AC).Ce symbole indique le courant direct (DC).Ce symbole indique la polarité électrique.Ce symbole indique un fusible.!
TECHNICOLOR1-5 rue Jeanne d’Arc92130 Issy-les-MoulineauxFrancewww.technicolor.comCopyright 2016 Technicolor. Tutti i diritti riservati.Tutti i nomi commerciali citati sono marchi di servizi, marchi o marchi registrati delle rispettive società. Specifiche soggette a modifica senza preavviso.DMS3-SAF-25-381 v1.0. CONSIGNES DE SÉCURITÉ ET INFORMATIONS RÉGLEMENTAIRESAVANT D’INSTALLER OU D’UTILISER LE PRODUIT, LISEZ ATTENTIVEMENT CES INSTRUCTIONSApplicabilitéCes Consignes de sécurité et informations réglementaires sont applicables à :• Technicolor Décodeurs (Set-Top Box)Instructions Importantes Reltaives à la Sécurité1Lisez ces instructions.2Conservez ces instructions.3Soyez attentif à tous les avertissements.4Suivez toutes les instructions.5N’utilisez pas cet appareil à proximité de points d’eau.6Nettoyez cet appareil avec un chiffon sec uniquement.7Veillez à ne pas obstruer les orifices de ventilation. Installez cet appareil conformément aux instructions du fabricant.8N’installez pas l’appareil à proximité d’une source de chaleur telle qu’un radiateur, une grille de chauffage, un poêle ou tout autre dispositif produisant de la chaleur (y compris un amplificateur).9Ne retirez pas le dispositif de sécurité de la prise avec détrompeur ou avec mise à la terre. Une prise avec détrompeur est constituée de deux broches dont l’une est plus large que l’autre. Une prise avec mise à la terre est constituée de deux broches et d’une troisième broche de terre. La broche large, ou la troisième broche de terre, est destinée à garantir votre sécurité. Si la prise fournie n’est pas adaptée à votre prise de courant, consultez un électricien pour remplacer cette dernière.10Évitez de marcher sur le cordon d’alimentation ou de le pincer, en particulier au niveau des prises de courant, des socles de prises de courant et du point de sortie de l’appareil.11 Utilisez exclusivement les accessoires recommandés par le fabricant.12Utilisez uniquement l’appareil avec le chariot, le support, le trépied, la console ou la table recommandés par le fabricant ou vendus avec l’appareil. Si vous utilisez le chariot, veillez à déplacer l’appareil avec précaution, afin de ne pas faire basculer le chargement et risquer de vous blesser.13Débranchez cet appareil pendant les orages ou en cas d’inutilisation prolongée.14La maintenance doit être réalisée par des techniciens qualifiés. Des opérations de maintenance sont nécessaires lorsque l’appareil a été endommagé (par exemple, en cas de dégâts au niveau du cordon d’alimentation ou de la prise), lorsque du liquide s’est répandu ou que des objets sont tombés à l’intérieur de l’appareil, lorsqu’il a été exposé à la pluie ou à l’humidité et en cas de dysfonctionnement ou de chute.SymbolesLes symboles suivants peuvent être trouvés dans ce et la documentation d'accompagnement, ainsi !Afin d’éviter tout risque d’incendie, de choc électrique et de blessure corporelle, il convient d’utiliser le produit conformément aux mesures de sécurité de base, parmi lesquelles les suivantes :• Respectez toujours les instructions d’installation détaillées dans la documentation accompagnant le produit.• Évitez de connecter ou d'utiliser ce produit en cas d'orage. La foudre peut provoquer un faible risque de choc électrique.• N’utilisez pas le produit pour signaler une fuite de gaz à proximité de cette fuite.

Navigation menu