CyberTAN Technology WE301A1 MY NET AC WIFI BRIDGE User Manual My Net AC1300 Wi Fi Range Extender
CyberTAN Technology Inc. MY NET AC WIFI BRIDGE My Net AC1300 Wi Fi Range Extender
user manual
⢠My Net AC Wi-Fi Bridge User Manual WDÂŽ Service and Support Should you encounter a problem, please give us an opportunity to address it before returning this product. Most technical support questions can be answered through our knowledge base or e-mail support service at http://support.wdc.com. If the answer is not available or, if you prefer, please contact WD at the best telephone number shown below. Your product includes 30 days of free telephone support during the warranty period. This 30-day period starts on the date of your first telephone contact with WD technical support. E-mail support is free for the entire warranty period and our extensive knowledge base is available 24/7. To help us keep you informed of new features and services, remember to register your product online at http://register.wdc.com. Accessing Online Support Visit our product support website at http://support.wdc.com and choose from these topics:       Downloads - Download drivers, software, and updates for your WD product. Registration - Register your WD product to get the latest updates and special offers. Warranty & RMA Services - Get Warranty, Product Replacement (RMA), RMA Status, and Data Recovery Information. Knowledge Base - Search by keyword, phrase, or answer ID. Installation - Get online installation help for your WD product or software. WD Community â Share your thoughts and connect with other users. Contacting WD Technical Support When contacting WD for support, have your WD product serial number, system hardware, and system software versions available. North America English 855-842-5370 Spanish 800.832.4778 Europe (toll free)* 00800 ASK4 WDEU (00800 27549338) Europe Middle East Africa +31 880062100 +31 880062100 +31 880062100 Asia Pacific Australia China Hong Kong India Indonesia Japan Korea Malaysia Philippines Singapore Taiwan 1 800 42 9861 800 820 6682/+65 62430496 +800 6008 6008 1 800 11 9393 (MNTL)/1 800 200 5789 (Reliance) 011 26384700 (Pilot Line) +803 852 9439 00 531 650442 02 703 6550 +800 6008 6008/1 800 88 1908/+65 62430496 1 800 1441 0159 +800 6008 6008/+800 608 6008/+65 62430496 +800 6008 6008/+65 62430496 * Toll free number available in the following countries: Austria, Belgium, Denmark, France, Germany, Ireland, Italy, Netherlands, Norway, Spain, Sweden, Switzerland, United Kingdom. 1 Important User Information . . . . . . . . . . . . . . . . . . . . 1 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Recording Your WD Product Information . . . . . . . . . . . . . . . . . . . . 2 Registering Your WD Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features (USE MARCOM LAUNCHPAD) . . . . . . . . . . . . . . . . . . . . . 3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Accessories 4 AC Power Adapters 5 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Front Panel 5 Side Panel 6 Back (not shown) 7 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Setting up the bridge with a WPS-Enabled Router . . . . . . . . . . . . . . 8 Step 1: Connect the bridge to Your Router 8 Step 2: Tune for Distance and Coverage 9 Step 3: Open My Dashboard 9 Setting up Your bridge Manually . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Configuring Basic Settings . . . . . . . . . . . . . . . . . . . 14 Opening My Dashboard After Setup. . . . . . . . . . . . . . . . . . . . . . . . 14 Configuring Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Adding a Wireless Device to Your Network . . . . . . . . . . . . . . . . . . 18 Configuring Advanced Settings . . . . . . . . . . . . . . . 22 Changing the Administrator Password . . . . . . . . . . . . . . . . . . . . . . 22 Resetting and Rebooting the bridge. . . . . . . . . . . . . . . . . . . . . . . . 23 Updating the Bridgeâs Firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . 24 TABLE OF CONTENTS â i 6 Setting up the Bridge in AP Mode . . . . . . . . . . . . . . 25 Using the Bridge as an Access Point . . . . . . . . . . . . . . . . . . . . . . 26 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Regulatory and Warranty Information. . . . . . . . . . . 28 Regulatory Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Warranty Information (All Regions Except Australia/New Zealand) . 32 Warranty Information (Australia/New Zealand only) . . . . . . . . . . . . . 33 GNU General Public License (âGPLâ) . . . . . . . . . . . . . . . . . . . . . . . 34 TABLE OF CONTENTS â ii IMPORTANT USER INFORMATION Important User Information Important Safety Instructions This device is designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated into this unit will protect you if you observe the following instructions for installation, use, and servicing. Read these instructions.  Keep these instructions.  Heed all warnings.  Follow all instructions.  Do not use this apparatus near water.  Clean only with dry cloth.  Do not block any ventilation openings. Install in accordance with the manufacturerâs instructions.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.  Only use attachments/accessories specified by the manufacturer.  Unplug this apparatus during lightning storms or when unused for long periods of time.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  Carefully read and follow the Quick Install Guide and User Manual.  Do not operate this device outside the temperature range of 5°Câ35°C (41°Fâ95°F).  Do not drop or shake the device.  Do not move the device when it is powered on.  Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon them or against them.  Do not overload wall outlets. For additional safety information, refer to www.wdc.com.  MY NET AC WI-FI BRIDGE USER MANUAL IMPORTANT USER INFORMATION Recording Your WD Product Information In the following table, write the serial and model numbers of your new WD product. You can find this information on the label on the bottom of the device. You should also note the date of purchase. This information may be required when requesting technical support. Serial Number: Model Number: Purchase Date: System and Software Notes: Registering Your WD Product Your WD product includes 30 days of free technical support during the applicable warranty period for your product. The 30-day period commences on the date of your first telephone contact with WD technical support. Register your WD product online at http://register.wdc.com. MY NET AC WI-FI BRIDGE USER MANUAL PRODUCT OVERVIEW Product Overview Thank you for purchasing the My Net⢠AC Wi-Fi Bridge. This user manual provides stepby-step instructions for installing and using your new bridge. For the latest WD product information and news, visit our website at www.wdc.com. This chapter contains the following topics: Features Package Contents Components Introduction The My Net⢠AC Wi-Fi Bridge provides an Ethernet connection to remote devices via a wireless connection. Features The outstanding features of the My Net AC Wi-Fi Bridge are described below. Note: For detailed technical specifications, see Appendix A. Package Contents In addition to your My Net AC Wi-Fi Bridge, the package contains:    Network (Ethernet) cable AC Power adapter Quick Install Guide MY NET AC WI-FI BRIDGE USER MANUAL PRODUCT OVERVIEW Quick Install Guide My Net AC Wi-Fi Bridge AC power adapter Ethernet cable Accessories For U.S. residents, visit www.shopwd.com to view additional accessories available for your My Net AC Wi-Fi Bridge. For users outside the U.S., visit http://support.wdc.com. AC Power Adapters The AC power adapter varies, depending on your location. Some locations do not require a power plug clip. Units sold in those locations have a fixed power plug. Refer to the illustrations below. US/JA/TW EU/KO US/JA/TW EU/KO Installing MY NET AC WI-FI BRIDGE USER MANUAL Removing Installing Removing PRODUCT OVERVIEW Components Front Panel MY NET AC WI-FI BRIDGE USER MANUAL PRODUCT OVERVIEW Front LED indicators LED Description Power Steady when the bridge is powered on and operational; flashes slowly during boot-up, firmware upgrades, and system self-tests. Wireless Lit when wireless connection is active. Wi-Fi Protected Setup (WPS) When connecting the bridge and a wireless device (e.g., a printer) that you want to add to the network, the LED indicates the status of WPS: ⢠When WPS is connecting a network device, the light blinks slowly. ⢠If an error occurs during setup, the light blinks quickly. ⢠After setup, light is solid when WPS is active. Side Panel Side components Button Description Power button Use the included AC power adapter to connect this port to the power source. WPS (Wi-Fi Protected Setup) button Enables you to configure Wi-Fi security on WPS-enabled devices. Ethernet (LAN) or Internet ports Use an Ethernet (network) cable to connect wired network devices to these ports. Power port Use the included AC power adapter to connect this port to the power source. MY NET AC WI-FI BRIDGE USER MANUAL PRODUCT OVERVIEW Port LED indicators Component LED Description Ethernet port Link LED (Green) Steady on when a cable connects the port to another Ethernet port. Activity LED (Yellow) Blinks to indicate network activity of that Ethernet port. Back (not shown) Component Description Reset button Press and releaseâResets the bridge to factory defaults. When the reset finishes, the Power LED blinks. MY NET AC WI-FI BRIDGE USER MANUAL GETTING STARTED Getting Started This chapter contains the following topics: Setting up the Bridge with a WPS-Enabled Router Setting up Your bridge Manually Setting up the Bridge with a WPS-Enabled Router You have two options for setting up the bridge. If your router is WPS enabled, follow steps 1 and 2 below. If your router is not WPS enabled or you are experiencing interference problems, go to âSetting up Your bridge Manuallyâ on page 10. Step 1: Connect the bridge to Your Router 1. Connect the bridge to a power source and press the Power button. 2. Press the Wi-Fi Protected Setup button (sometimes labeled WPS) on your router and the WPS button on the bridge within two minutes. Note: If your router does not support WPS, see âSetting up Your bridge Manuallyâ on page 10. The Connection light is blue when the router and the bridge are connected. MY NET AC WI-FI BRIDGE USER MANUAL GETTING STARTED Step 2: Step 3: Step 4: Opening My Dashboard At this point you can configure the bridge. 1. Launch a web browser. MY NET AC WI-FI BRIDGE USER MANUAL GETTING STARTED 2. Enter http://WDbridge? or http://192.16???230 in the address field. The Welcome screen displays: Does it go through the whole thing with Setup Complete and Registration? Setting up Your bridge Manually There are cases where you may need to set up the bridge manually, for example when:   Wi-Fi Protected Setup (WPS) is disabled, or the router does not support WPS. Some interference is preventing WPS from working. 1. Connect the bridge using one of the following methods:  Connect an Ethernet cable from the bridge to a desktop or laptop computer.  Wirelessly connect to the bridge using your wireless-enabled computer. The Network Name is WDbridge.  Make a wired connection between your router and the bridge. MY NET AC WI-FI BRIDGE USER MANUAL 10 GETTING STARTED 2. Launch a web browser. The bridgeâs My Dashboard Welcome page displays automatically. 3. Select a language in the upper right corner (defaults to English) and make sure that Mode displays bridge (the default value). 4. Click Next to display the Select an available network screen. 5. You have three options:  Select an available Network Name and click Connect.  Double-click a Network Name or its row to populate it. The Secure Network Connection page displays. Continue to the next step.  In the Use another network field, enter the name of an additional network, and then click Connect. The Secure Network Connection page displays. Continue to the next step. 6. On the Secure Network Connection Password page, you have two options: NEED GRAPHIC Option #1â When WPS is not enabled on the router a. Enter the network password (default?) and press Enter. The Setup Wireless page displays the progress of the connection. The Setup Complete screen displays. MY NET AC WI-FI BRIDGE USER MANUAL 11 GETTING STARTED b. Continue to step 7. Option #2â When WPS is enabled on the router NEED GRAPHICS a. Click Use WPS to display the Wi-Fi Protected Setup page. b. Press both the WPS button on the bridge or the virtual WPS button on the screen and the WPS button on the router, -OREnter the routerâs PIN. c. Click WPS to display the progress of the connection. The Setup Complete page displays. The bridge is now connected to the router MY NET AC WI-FI BRIDGE USER MANUAL 12 GETTING STARTED wirelessly. 7. To register your bridge, on the Setup Complete screen, click Register Your bridge and complete the registration information requested on the Registration screen. DO YOU RETURN TO THIS SCREEN TO ADD A NEW DEVICE? 8. To add a new device to your network, click the Add a New Device to My Network link and continue with âAdding a Wireless Device to Your Network .â on page 19. IF THEY DO THIS BEFORE REGISTERING, CAN THEY GO BACK AND REGISTER. IF THEY REGISTER FIRST, DO THEY EVER SEE THIS LINK AGAIN? MY NET AC WI-FI BRIDGE USER MANUAL 13 CONFIGURING BASIC SETTINGS Configuring Basic Settings This chapter contains the following topics: Opening My Dashboard After Setup Configuring Wireless Settings Configuring Advanced Settings Opening My Dashboard After Setup To open the My Net AC Wi-Fi Bridge dashboard after initial configuration: 1. Enter http://WDBridge? or http://192.168.???? in the address field of your browser. The login or Welcome? screen displays: 2. Enter the bridgeâs username (default value is admin) and password (default value is lowercase password) and click Submit. The My Dashboard home screen displays: Should say My Net AC Wi-Fi Bridge on the screen MY NET AC WI-FI BRIDGE USER MANUAL 14 CONFIGURING BASIC SETTINGS The icons at the top of the screen open modules and wizards for performing important tasks. The red Alert icon at the upper right of the screen displays notices concerning the bridge. Icon Name Actions See ... My Dashboard Review and change current settings. âConfiguring Basic Settingsâ on page 14 Set up Wireless Configure wireless settings such as network name and security. âConfiguring Wireless Settingsâ on page 17 Add a Device Add a wireless device and configure its security settings. âConfiguring Advanced Settingsâ on page 21 Advanced Settings Configure advanced settings for system administration such as firmware upgrades. âConfiguring Advanced Settingsâ on page 21 Alert Click to display recent alerts about new firmware and network issues and shortcuts to important settings. MY NET AC WI-FI BRIDGE USER MANUAL 15 CONFIGURING BASIC SETTINGS Reviewing Current Settings The My Dashboardâs home screen is a simple snapshot of the bridgeâs configuration with the most essential information in one screen. It includes summary information for wireless settings and status. NEED NEW GRAPHIC 1. Review the following settings: Setting Description Network Name Unique identifier of the 2.4 GHz or 5.0 GHz network, depending on your selection on the frequency switch. Password Password for accessing the wireless network. Status Status can be Unconfigured, Configured and Connected, or Unconnected. Number of Devices Connected Number of devices connected to the bridge. Wirelessly only or via USB port too? 2. To reconfigure wireless settings, click one of the Set up Wireless links on the screen or the Set Up? Wireless icon in the icon bar. See ??? MY NET AC WI-FI BRIDGE USER MANUAL 16 CONFIGURING BASIC SETTINGS Configuring Wireless Settings 1. Click the Set up Wireless icon. Note: Alternatively, on the My Dashboard home screen, you can click the Set up Wireless link or arrow. 2. View or modify the required wireless settings of the bridge: Setting Description Network Name Name given to the wireless network. MUST BE SAME as the routerâs network name. Network Frequency Toggle to 2.4 GHz or 5.0 GHz. MUST BE SAME as routerâs frequency. Network Key Password for accessing the wireless network. MUST BE SAME AS the routerâs password Wireless Security mode (should be capitalized) Type of security applied to the wireless network. The default is WPA-Personal/WPA2-Personal. WPA (Wi-Fi Protected Access) and WPA2 are security protocols that use a dynamically changing key. WPA2 is the second generation protocol that uses stronger AES (Advanced Encryption Standard) encryption. The third option is None. WPA/WPA2 mixed security mode provides better compatibility with legacy devices. However, for better performance and connectivity, WPA2 security mode is highly recommended. MY NET AC WI-FI BRIDGE USER MANUAL 17 CONFIGURING BASIC SETTINGS Setting Description Connection Type Can be Static IP, Dynamic IP (DHCP), PPPoE (Username/Password), or PPTP (Username/ Password). If you select Static IP, the following additional fields display: IP address (should be capital A)âIP address of the bridge. It should be on the same network as your router. SubnetâThe subnet mask is used to control how many subnetworks can exist in your local network. The more subnetworks there are, the fewer the hosts you can have per subnet. GatewayâIP address of the router to which this bridge is connected. Status Status can be Unconfigured, Configured and Connected, or Unconnected. Number of Devices Connected Number of devices connected to the bridge. Wirelessly only or via USB port too? QoS Enabled Enable or disable the Fastrak (or WMM?) QoS application, which prioritizes different client applications/traffic types over the Internet. Enabled by default. 3. Click Save. MY NET AC WI-FI BRIDGE USER MANUAL 18 CONFIGURING BASIC SETTINGS Adding a Wireless Device to Your Network 1. On the Dashboard, click the Add a Device icon. 2. Follow the appropriate procedure below: a. Setup 1: Press the WPS button on the front of the bridge or click the virtual button on this screen. On your wireless device, press the physical WPS button or click the virtual WPS button. b. Setup 2: If prompted by your wireless device, enter the bridgeâs WPS PIN shown on the screen into your wireless device. Note: The label on the bottom of the bridge displays the default PIN. You can change the PIN on the Wi-Fi Protected Setup screen. (See âScreen Descriptionsâ on page 21.) Once you change the PIN, the default value is MY NET AC WI-FI BRIDGE USER MANUAL 19 CONFIGURING BASIC SETTINGS invalid unless you reset the bridge to default values.If your device requests the bridgeâs PIN, enter the PIN shown on the screen. 3. Click WPS. WHAT DO YOU SEE? 4. To confirm that the device has been added, click Confirm. 5. The Confirmation screen displays the attached devices in the Client Table. NEED COMPLETED EXAMPLE. 6. Click OK to return to the My Dashboard home screen. MY NET AC WI-FI BRIDGE USER MANUAL 20 CONFIGURING ADVANCED SETTINGS Configuring Advanced Settings The Advanced Settings icon takes you to screens where you can change the administrative password, update the bridgeâs firmware, restore factory settings, and reboot the bridge. This chapter contains the following topics: Changing the Administrator Password Updating the Bridgeâs Firmware Setting up the Bridge in AP Mode Note: To close an Advanced Settings screen, click the Close button at the top of the screen. The My Dashboard home screen displays. Screen Descriptions Changing the Administrator Password The admin account manages the bridge interface. The admin has read/write access and can create passwords. The default password is password; to keep your bridge secure, it is a best practice to create a new password. To change the administrator password: MY NET AC WI-FI BRIDGE USER MANUAL 21 CONFIGURING ADVANCED SETTINGS 1. Click the Advanced Settings icon and then the Administrator tab (link) on the left to display the Admin/Administrator screen. 2. Enter the existing administrator password in Original Password and the new administrator password in the Password and Verify Password fields. Click Save. MY NET AC WI-FI BRIDGE USER MANUAL 22 CONFIGURING ADVANCED SETTINGS Resetting and Rebooting the Bridge Resetting to Factory Defaults You may want to reset the bridge to how it was when you bought it. You have two options for restoring factory defaults: through the user interface or through the Reset button on the bottom of the bridge. To use the user interface: 1. Click the Advanced Settings icon and then the System tab (link). 2. Click Reset to the right of Reset to Factory Default Settings. 3. When a confirmation message displays, click OK. 4. Wait until the bridge reboots before using it. To reset the bridge manually: 1. Press and hold the Reset button on the bottom of the bridge for at least 10 seconds. When the reset finishes, the Power LED blinks. Important: Do not reboot the bridge or close the application while the update is taking place. Rebooting WARNING! To avoid data loss, before rebooting, stop all network and read/write activities. You can reboot the bridge two ways. If you are physically close to it, just press the On/Off button on the bridge. If you cannot easily press the button: 1. Click the Advanced Settings icon and then the System tab (link). 2. Click Reboot. MY NET AC WI-FI BRIDGE USER MANUAL 23 CONFIGURING ADVANCED SETTINGS Updating the Bridgeâs Firmware Check for bridge firmware updates and upload new firmware. Note: For best results, upload the firmware using a wired connection. 1. Click the Advanced Settings icon and then the Administrator icon. 2. Click the Firmware Update tab. To check for the latest firmware version: Important: Do not disconnect or turn off the bridge while the update is in process. 1. Click Check Now. The bridge searches the WD website for a new firmware file. If a new file exists, the latest firmware version and an Update Now button appear. 2. Click Update Now to begin the firmware update. A message tells you how long the upload will take. Please wait while the firmware update is taking place. To update from a file: 1. Locate the firmware file on the WD Support site at http://support.wdc.com and download it to your computer. 2. On the bridge screen, browse to the firmware file you saved and click Open. The file name displays in the browser field on the bridge screen. 3. Click Upload. A message says how long the upload will take. Please wait while the firmware update is taking place. MY NET AC WI-FI BRIDGE USER MANUAL 24 SETTING UP THE BRIDGE IN AP MODE Setting up the Bridge in AP Mode The difference between bridge mode and access point mode is that an bridge has a wireless uplink to the router and an access point has a wired uplink to the router. To use the bridge in AP mode, connect it using an Internet cable as described in âSetting up Your bridge Manuallyâ on page 10. GRAPHIC You can set up the bridge in AP mode from the Welcome screen (see âSetting up Your bridge Manuallyâ on page 10) or from the My Dashboard Wireless Settings page. ? 1. Launch a web browser, and type WDbridge or IP address? in the address field. The My Dashboard Home page displays. NEED NEW GRAPHIC 2. Click the Set up Wireless icon. 3. Edit Network Name and Network Key (the password for accessing the wireless network) if desired. CAN THEY DO THIS; SHOULDNâT THEY BE THE SAME AS THE ROUTERâS? 4. To change Network Frequency, toggle between 2.4 GHz or 5.0 GHz. HOW? 5. From the Mode drop-down list, select AP. 6. From the Connection Type drop-down list, select one of the following options:  Automatic Configuration - DHCP  Static 7. If you select Static, complete the IP, Subnet, and Gateway fields that appear. Note: Status (for example, Connected) and Number of Devices Connected to the access point are view-only fields. 8. Select or clear the QoS Enabled check box. WMM (Wi-Fi Multimedia) is a standard that defines quality of service (QoS) in Wi-Fi networks, prioritizes capability, and optimizes video and audio performance. MY NET AC WI-FI BRIDGE USER MANUAL 25 SETTING UP THE BRIDGE IN AP MODE 9. Click Save. The Setup Complete screen displays. 10. Do one of the following:  Click Register Your bridge and follow the registration wizard.  Click Iâm Done. What displays? 11. To add a new wireless device to your network, click the Add a New Device to My Network link. See âConfiguring Advanced Settingsâ on page 21. You can stream music, photos, and videos from a connected wired Ethernet entertainment/ HD device using the Ethernet cable provided with the bridge?MORE NEEDED MY NET AC WI-FI BRIDGE USER MANUAL 26 TROUBLESHOOTING DO THESE APPLY? Troubleshooting DO THESE APPLY? Problem Solution The power LED does not illuminate. 1. Ensure that the power cord is correctly connected to the bridge. 2. Ensure that the electrical outlet is working properly. To do this, plug a different electronic device into the outlet and try to power it on. 3. Ensure that you are using the AC adapter provided with the bridge. A port number LED does not illuminate. 1. Ensure that the connected device is powered on. 2. Ensure that the Ethernet cable(s) are securely connected to the ports on both the device and the bridge. 3. To ensure that the cable between the bridge and the electronic device is working properly, replace it with another cable. Computers are unable to access the Internet. 1. Ensure that the bridge is powered on. The power LED should be solid and not flashing. 2. Check the cable connections between the modem, bridge and computer. The Ethernet cable connected to your modem should be connected to the Internet port on the bridge. An Ethernet cable from your computer should be connected to a LAN port on the side of the bridge. 3. Power off and power on your modem, bridge, and computer. 4. If all else fails, install My Net View from the product CD or contact Technical Support at http://support.wdc.com or your ISP. All front panel LEDs flash continuously. 1. Relocate your bridge to a place that has good ventilation. 2. Turn off your bridge, and set it aside for 15 to 20 minutes until it cools down. Turn your bridge back on to resume operation. 3. If the problem persists, contact Technical Support at http://support.wdc.com. The bridge has a weak signal 1. Tune as described in âStep 2:â on page 9. 2. ? MY NET AC WI-FI BRIDGE USER MANUAL 27 REGULATORY AND WARRANTY INFORMATION Regulatory and Warranty Information This chapter contains the following topics: Regulatory Compliance Warranty Information (All Regions Except Australia/New Zealand) Warranty Information (Australia/New Zealand only) GNU General Public License (âGPLâ) Regulatory Compliance Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:     Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Regulatory Information/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the userâs authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. For operation within 5.15 ~ 5.25 GHz frequency range, it is restricted to indoor environment. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. MY NET AC WI-FI BRIDGE USER MANUAL 28 For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Pour les produits disponibles aux Ătats-Unis / Canada du marchĂŠ, seul le canal 1 Ă 11 peuvent ĂŞtre exploitĂŠs. SĂŠlection d'autres canaux n'est pas possible. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Cet appareil et son antenne (s) ne doit pas ĂŞtre co-localisĂŠs ou fonctionnement en association avec une autre antenne ou transmetteur. The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. Le dispositif pourrait automatiquement cesser d'ĂŠmettre en cas d'absence d'informations Ă transmettre, ou une dĂŠfaillance opĂŠrationnelle. Notez que ce n'est pas l'intention d'interdire la transmission des informations de contrĂ´le ou de signalisation ou l'utilisation de codes rĂŠpĂŠtitifs lorsque requis par la technologie. The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. le gain maximal dâantenne permis (pour les dispositifs utilisant la bande 5725-5825 MHz) doit se conformer Ă la limite de p.i.r.e. spĂŠcifiĂŠe pour lâexploitation point Ă point et non point Ă point, selon le cas. REGULATORY AND WARRANTY INFORMATION 䝼ä¸čŚčŞéŠç¨ çŁĺ°ĺ çśĺĺźčŞčĺć źäšä˝ çĺ°é ťéťćŠďźéçśč¨ą ďźĺ Źĺ¸ ĺčć使ç¨č ĺä¸ĺžć čŞčŽć´é ťç 大 çćčŽć´ĺč¨č¨äšçšć§ĺ č˝ ä˝ çĺ°é ťéťćŠäšä˝żç¨ä¸ĺžĺ˝ąéżéŁčŞĺŽĺ ¨ĺ嚲ćžĺćłé俥ďźçśçźçžć嚲ćžçžčąĄćďźćçŤĺł ĺç¨ďźä¸ŚćšĺčłçĄĺš˛ćžććšĺžçšźçşä˝żç¨ ĺé ĺćłé俥ďźćäžéťäżĄćłčŚĺŽä˝ćĽäšçĄçˇéťé 俥 ä˝ çĺ°é ťéťćŠé ĺżĺĺćłé俥ćĺˇĽćĽ ç§ĺ¸ĺéŤçç¨éťćł˘čźťĺ°ć§éťćŠč¨ĺäšĺš˛ćž For Mexico Only La operaciĂłn de este equipo estĂĄ sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operaciĂłn no deseada. For Brazil Only Este equipamento opera em carĂĄter secundĂĄrio, isto ĂŠ, nĂŁo tem direito a proteção contra interferĂŞncia prejudicial, mesmo de estaçþes do mesmo tipo, e nĂŁo causar interferĂŞncia a sistema operando em carĂĄter primĂĄrio. CE Compliance for Europe Operation of this device is subjected to the following National regulations and may be prohibited to use if certain restriction should be applied. Marking by the CE symbol indicates compliance of this system to the applicable Council Directives of the European Union, including the EMC Directives (2004/108/EC), (1999/5/EC), the Low Voltage Directive (2006/95/EC), and EuP Directive (2005/32/EC). A âDeclaration of Conformityâ in accordance with the applicable directives has been made and is on file at Western Digital Europe. Die Kennzeichnung mit dem CE-Symbol zeigt an, dass dieses System die anwendbaren Richtlinien der Europäischen Union erfĂźllt, einschlieĂlich der EMV-Richtlinien (2004/108/EG), (1999/5/EG), der Niederspannungsrichtlinie (2006/95/EG) und der Richtlinie (2005/32/EG) des Europäischen Parlaments. Eine âKonformitätserklärungâ gemäà den anwendbaren Richtlinien wurde abgegeben und kann bei Western Digital Europe eingesehen werden. Le symbole CE sur l'appareil indique la conformitĂŠ de cet appareil avec les directives applicables du Conseil de l'Union EuropĂŠenne, dont les directives EMC (2004/108/EC), (1999/5/EC), la directive sur les limites de tension (2006/95/EC) et la directive EuP (2005/32/ EC), si applicable. Une ÂŤ dĂŠclaration de conformitĂŠ Âť conforme aux directives applicables a ĂŠtĂŠ effectuĂŠe et est consultable chez Western Digital Europe. Il marchio CE indica la conformitĂ del sistema alle direttive applicabili del Consiglio dell'Unione europea, tra cui le Direttive EMC (2004/108/CE), (1999/5/CE), la Direttiva Bassa Tensione (2006/95/CE ), e la Direttiva EuP (2005/32/CE). Una âDichiarazione di conformitĂ â redatta in base alle direttive vigenti è disponibile presso Western Digital Europe. La marca con el sĂmbolo CE indica el cumplimiento de este sistema de las Directivas del Consejo de la UniĂłn Europea correspondientes, incluidas las directivas EMC (2004/108/EC) y (1999/5/EC), la Directiva de bajo voltaje (2006/95/CE) y la Directiva EuP (2005/32/EC). Se ha realizado una "DeclaraciĂłn de conformidad" de acuerdo con las directivas aplicables y se encuentra archivada en Western Digital Europe. CE-märkningen innebär att detta system uppfyller Europeiska Unionens tillämpliga rĂĽdsdirektiv, inklusive EMC-direktivet (2004/108/EC), (1999/5/EC), lĂĽgspänningsdirektivet MY NET AC WI-FI BRIDGE USER MANUAL 30 REGULATORY AND WARRANTY INFORMATION (2006/95/EC) och EuP-direktivet (2005/32/EC). En "Konformitetsdeklaration" i enlighet med gällande direktiv har gjorts och finns arkiverad hos Western Digital Europe. Merking med CE-symbolet indikerer at dette systemet samsvarer med gjeldende direktiver (council directives) for EU, inkludert EMC-direktiv (2004/108/EF), (1999/5/EF), Lavspenningsdirektiv (2006/95/EF) og EuP-direktiv (2005/32/EF). En "SamsvarserklĂŚring" i henhold til gjeldende direktiver har blitt opprettet og er i Western Digital Europas arkiver. CE-merkintä osoittaa tämän järjestelmän yhdenmukaisuuden sovellettavissa olevien Euroopan yhteisĂśn neuvoston direktiivien kanssa, mukaan lukien EMC-direktiivi (2004/108/EC), (1999/5/EC), alijännitedirektiivi (2006/95/EC) sekä EuP-direktiivi (2005/32/EC). "Noudattamisjulistus" on jätetty asiaankuuluvien direktiivien mukaisesti, ja se on tallessa Western Digital Europessa. MĂŚrkning med CE-symbolet angiver at systemet overholder Europaparlamentets og RĂĽdets direktiver, herunder EMC-direktiverne (elektromagnetisk kompatibilitet) (2004/108/EC), (1999/ 5/EC) og lavspĂŚndingsdirektivet (2006/95/EC) og EuP-direktivet 2005/32/EC. En âDeclaration of Conformityâ (overensstemmelsesattestering) i henhold til gĂŚldende direktiver er afgivet og opbevares hos Western Digital Europe. Đ CE Ń Ń Ń Ń Ń Ń Ń Ń ĐĄ Ń (2004/108/EC, 1999/5/EC), (2006/95/EC) Ń , (2005/32/EC). Đ Western Digital, ĐĄ Đ Î Îą Îż Îż Îż CE Ď ĎÎż Îż Îą ÎąĎ Ď Îż Ď Îą Ď ÎżĎ Îż ÎżĎ ÎŁĎ ÎżĎ ÎżĎ Ď ĎÎą Î , Ď Ď Îą Îą Îż Îż Ď Îż Îą Ď Îą Îą (2004/108/ Î), (1999/5/ Î), Îż Îą Ď ĎÎą (2006/95/ Î) Îą Îż Îą ÎżĎ Ď ĎÎą Îż ÎÎż Îż ÎżĎ ÎżĎ (2005/32/ Î). ÎĎ Ď Îą Îą ÎżĎÎż ι Ď Ď Âť, Îą ιι Ď Îą Western Digital Ď Ď Ď Îą Ď ÎżĎ Îż Îą MY NET AC WI-FI BRIDGE USER MANUAL 31 REGULATORY AND WARRANTY INFORMATION Environmental Compliance (China) ŃťŕŞĐáłâŚáłáâ ˝äźáŞâŤÜâŹă´âąŕ§ĄâżŕŚŕ§żäŁ äźÓ৥⿠á´ŕťá´ă âŹäáľăŕ§áľŕ¤ľ âŹâ¤ŕŚŹŕĽŕ°źâŹâ¤ŐŻá¨ŕ°ź âšâ˛¸ áłâŚáłáâ ˝äźáŞâŤÜâŹă´ äŞ â˛ äŹ ÝÓäŤ ; ; ; ; 2 2 2 2 2 2 2 2 2 2 2 2 ໮âă¨ăŁ ໮âŃ ăŁäŽ 2 2 2 2 2 2 2 2 2ҡ㸟â¸âžĄäźÓâąá áłŕ´äźá´¤áĐá ৿âąäšâžĄáłâŚáłáâ ˝äźŕ´Ô˘Ń˘ĐढŇâĽÝ ੠ŕłÖľáѝώäźá äšáâąÇâŹá¤ ÖľáŃťŕŞĐáłâŚáłáâ ˝äźâąä°¤äŁă˝âÇ 6-7 ăžá Žâąä°¤äŁÇ ;ҡ㸟â¸âžĄäźÓá ⍟âąŕ´äźá´¤áĐăáĽáłĎăá´¤áÝá ৿âąáłâŚáłáâ ˝äźĺŹŃ˘ĐढŇâĽÝ ੠ŕłÖľáѝώäźá äšáâąÇâŹá¤ÖľáŃťŕŞĐáłâŚáłáâ ˝äźâąä°¤äŁă˝âÇ 6-7 ăžá Žâąä°¤äŁ 䰸䴲ѝŕŞĎ঺áłáˇäËá áłâŤÝâŹä°ŃťŕŞŕŚÝäźÓâąĂžâŚÖąŐ⍟ᳳ䰤ÿŕ´âŹ â¸á°âźâąăşŕ§ă¸źâźÇ⸠âŚÖąŐ⫼ᳳ䰤াä⍟ѢѝŕŞá âŤÝ âŹĐá ăžá ŽâąŐ⍟ᴾÓÇ ŕłźâ¸ă¸źĐËÓĎŽŕ§ăäłă˝á¸áĽá ˛ä°áâŤŢâŹááˇäÄ;ÄâąäšâłäŻă¸ äŻĎâšâąáĄá´áťăžˇäÇ Warranty Information (All Regions Except Australia/New Zealand) Limited Warranty WD warrants that the Product, in the course of its normal use, will for the term defined below, be free from defects in material and workmanship and will conform to WDâs specification therefor. The term of your limited warranty depends on the country in which your Product was purchased. The term of your limited warranty is for 1 year in the North, South and Central America region, 2 years in the Europe, the Middle East and Africa region, and 1 year in the Asia Pacific region, unless otherwise required by law. The term of your limited warranty period shall commence on the purchase date appearing on your purchase receipt. WD may at its discretion make extended warranties available for purchase. WD shall have no liability for any Product returned if WD determines that the Product was stolen from WD or that the asserted defect a) is not present, b) cannot reasonably be rectified because of damage occurring before WD receives the Product, or c) is attributable to misuse, improper installation, alteration (including removing or obliterating labels and opening or removing external enclosures, unless the product is on the list of limited user-serviceable products and the specific alteration is within the scope of the applicable instructions, as found at http://support.wdc.com), accident or mishandling while in the possession of someone other than WD. Subject to the limitations specified above, your sole and exclusive warranty shall be, during the period of warranty specified above and at WDâs option, the repair or replacement of the Product with an equivalent or better Product. The foregoing warranty of WD shall extend to repaired or replaced Products for the balance of the applicable period of the original warranty or ninety (90) days from the date of shipment of a repaired or replaced Product, whichever is longer. The foregoing limited warranty is WDâs sole warranty and is applicable only to products sold as new. The remedies provided herein are in lieu of a) any and all other remedies and warranties, whether expressed, implied or statutory, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and b) any and all obligations and liabilities of WD for damages including, but not limited to accidental, consequential, or special damages, or any financial loss, lost profits or expenses, or lost data arising out of or in connection with the purchase, use, or performance of the Product, even if WD has been advised of the possibility of such damages. In the United States, some states do not allow exclusion or limitations of incidental or consequential damages, so the limitations above may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Obtaining Service WD values your business and always attempts to provide you the very best of service. If this Product requires maintenance, either contact the dealer from whom you originally purchased the Product or visit our product support Web site at http://support.wdc.com for information on how to obtain service or a Return Material Authorization (RMA). If it is determined that the Product may be defective, you will be given an RMA number and instructions for Product return. An unauthorized return (i.e., one for which an RMA number has not been issued) will be returned to you at your expense. Authorized returns must be shipped in an approved shipping container, prepaid and insured, to the address provided on your return paperwork. Your original box and packaging materials should be kept for storing or shipping your WD product. To conclusively establish the period of warranty, check the warranty expiration (serial number required) via http://support.wdc.com. WD shall have no liability for lost data regardless of the cause, recovery of lost data, or data contained in any Product placed in its possession. MY NET AC WI-FI BRIDGE USER MANUAL 32 REGULATORY AND WARRANTY INFORMATION Warranty Information (Australia/New Zealand only) For consumers purchasing products in Australia and New Zealand, please refer to this warranty information. Nothing in this warranty modifies or excludes your legal rights under the Australian Competition and Consumer Act or the New Zealand Consumer Guarantees Act. This warranty identifies WD's preferred approach to resolving warranty claims which is likely to be quick and simple for all parties. No other warranties either express or implied by law, including but not limited to those contained in the Sale of Goods Act, are made with respect to the Product. If you purchased your Product in New Zealand for the purposes of a business, you acknowledge and agree that the New Zealand Consumer Guarantees Act does not apply. In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if goods fail to be of acceptable quality and the failure does not amount to a major failure. What constitutes a major failure is set out in the Australian Consumer Law. Warranty WD warrants that the Product, in the course of its normal use, will for the term defined below, be free from defects in material and workmanship and will conform to WDâs specifications. The term of your warranty is 1 year in Australia and New Zealand, unless otherwise required by law. The term of your warranty period shall commence on the purchase date appearing on your purchase receipt from an authorized distributor or authorized reseller. Proof of purchase shall be required to be eligible for this warranty and to establish the commencement date of this warranty. Warranty service will not be provided unless the Product is returned to an authorized distributor, authorized reseller or regional WD return center where the Product was first shipped by WD. WD may at its discretion make extended warranties available for purchase. WD shall have no liability for any Product returned if WD determines that the Product was (i) not purchased from an authorized distributor or authorized reseller, (ii) not used in accordance with WD specifications and instructions, (iii) not used for its intended function, or (iv) stolen from WD, or that the asserted defect a) is not present, b) cannot reasonably be rectified because of damage occurring before WD receives the Product, or c) is attributable to misuse, improper installation, alteration (including removing or obliterating labels and opening or removing external enclosures, including the mounting frame, unless the product is on the list of limited user-serviceable products and the specific alteration is within the scope of the applicable instructions, as found at http://support.wdc.com), accident or mishandling while in the possession of someone other than WD. PRODUCTS ARE COMPLEX AND FRAGILE ITEMS THAT MAY OCCASSIONALY FAIL DUE TO (A) EXTERNAL CAUSES, INCLUDING WITHOUT LIMITATION, MISHANDLING, EXPOSURE TO HEAT, COLD, AND HUMIDITY, AND POWER FAILURES, OR (B) INTERNAL FAULTS. SUCH FAILURES CAN RESULT IN THE LOSS, CORRUPTION, DELETION OR ALTERATION OF DATA. NOTE THAT YOU SHALL BE RESPONSIBLE FOR THE LOSS, CORRUPTION, DELETION OR ALTERATION OF DATA HOWSOEVER CAUSED, AND FOR BACKING UP AND PROTECTING DATA AGAINST LOSS, CORRUPTION, DELETION OR ALTERATION. YOU AGREE TO CONTINUALLY BACK UP ALL DATA ON THE PRODUCT, AND TO COMPLETE A BACKUP PRIOR TO SEEKING ANY GENERAL SERVICE AND TECHNICAL SUPPORT FROM WD. In Australia, if the Product is not of a kind ordinarily acquired for personal, domestic or household use or consumption, provided it is fair and reasonable to do so, WD limits its liability to replacement of the Product or supply of equivalent or better Product. This warranty shall extend to repaired or replaced Products for the balance of the applicable period of the original warranty or ninety (90) days from the date of shipment of a repaired or replaced Product, whichever is longer. This warranty is WDâs sole manufacturer's warranty and is applicable only to Products sold as new. Obtaining Service WD values your business and always attempts to provide you the very best of service. Should you encounter any problem, please give us an opportunity to address it before returning this Product. Most technical support questions can be answered through our knowledge base or e-mail support service at http://support.wdc.com. If the answer is not available or, if you prefer, please contact WD at the applicable telephone number shown in the front of this document. If you wish to make a claim, you should initially contact the dealer from whom you originally purchased the Product. If you are unable to contact the dealer from whom you originally purchased the Product, please visit our product support Web site at http://support.wdc.com for information on how to obtain service or a Return Material Authorization (RMA). If it is determined that the Product may be defective, you will be given an RMA number and instructions for Product return. An unauthorized return (i.e., one for which an RMA number has not been issued) will be returned to you at your expense. Authorized returns must be shipped in an approved shipping container, prepaid and insured, to the address provided with your RMA number. If following receipt of a qualifying claim under this warranty, WD or the dealer from whom you originally purchased the Product determines that your claim is valid, WD or such dealer shall, at its discretion, either repair or replace the Product with an equivalent or better Product or refund the cost of the Product to you. You are responsible for any expenses associated with a claim under this warranty. The benefits provided to you under this warranty are in MY NET AC WI-FI BRIDGE USER MANUAL 33 REGULATORY AND WARRANTY INFORMATION addition to other rights and remedies available to you under the Australian Competition and Consumer Act or the New Zealand Consumer Guarantees Act. Your original box and packaging materials should be kept for storing or shipping your WD product. To conclusively establish the period of warranty, check the warranty expiration (serial number required) via http://support.wdc.com. Western Digital Technologies, Inc. 3355 Michelson Drive, Suite 100 Phone: 949-672-7000 E-mail: support@wdc.com GNU General Public License (âGPLâ) Firmware incorporated into this product may include third party copyrighted software licensed under the GPL or Lesser General Public License ("LGPL") (collectively, âGPL Softwareâ) and not Western Digitalâs End User License Agreement. In accordance with the GPL, if applicable: 1) the source code for the GPL Software may be downloaded at no charge from http://support.wdc.com/download/gpl or obtained on CD for a nominal charge from http://support.wdc.com/download/gpl or by calling Customer Support within three years of the date of purchase; 2) you may re-use, re-distribute, and modify the GPL Software; 3) with respect solely to the GPL Software, no warranty is provided, to the extent permitted by applicable law; and 4) a copy of the GPL is included herewith, may be obtained at http://www.gnu.org, and may also be found at http://support.wdc.com/ download/gpl. Modification of or tampering with the Software, including but not limited to any Open Source Software, is solely at your own risk. Western Digital is not responsible for any such modification or tampering. Western Digital will not support any product in which you have or have attempted to modify the Software supplied by Western Digital. MY NET AC WI-FI BRIDGE USER MANUAL 34 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 35 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 36 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 37 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 38 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 39 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 40 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 41 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 42 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 43 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 44 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 45 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 46 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 47 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 48 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 49 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 50 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 51 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 52 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 53 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 54 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 55 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 56 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 57 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 58 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 59 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 60 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 61 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 62 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 63 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 64 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 65 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 66 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 67 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 68 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 69 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 70 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 71 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 72 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 73 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 74 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 75 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 76 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 77 REGULATORY AND WARRANTY INFORMATION MY NET AC WI-FI BRIDGE USER MANUAL 78 APPENDIX: TECHNICAL SPECIFICATIONS Appendix: Technical Specifications Specification Value Wireless standard IEEE 802.11n client Ethernet 1 x Gigabit Ethernet I/O ports (4) Ethernet (RJ-45) ports Bands 2.4 GHz and 5.0 GHz selectable dual mode MIMO mode? 3x3 (2.4 GHz), 3x3(5 GHz) Security WPA/WPA2-PSK WEP QoS N/A ??? Firewall N/A MY NET AC WI-FI BRIDGE USER MANUAL 79 Specification Value Supported operating systems Windows XP with Service Pack 3 Windows Vista with Service Pack 2 Windows 7 with Service Pack 1 Mac OS X Leopard Mac OS X Snow Leopard Mac OS X Lion Supported web browsers Internet Explorer 7 and later Safari 2 and later Firefox 2 and later Chrome 7 and later Physical dimensions Length: ??" (??? mm) Width: ??" (??? mm) Height: ??" (?? mm) Weight: 0.?? lb (0.?? Kg) Power supply Input voltage: 100V to 240V AC Input frequency: 50 to 60 Hz Output voltage: 12V DC, 3A Power supply: 36W Temperature Operating temperature: 5 to 35 oC (41 to 95 oF)?? Non-operating temperature: -20 to 65 oC (-4 to 149 oF)?? MY NET AC WI-FI BRIDGE USER MANUAL 80 INDEX Index AC power adapters 6 access point setup 74 accessing files remotely 4 accessing internal drive and external USB storage 68 accessories 5 adding a wireless device 28 Additional Features screens 48 additional software 4 Admin screens 56 administrator password 67 Advanced LAN screens 43 Advanced Settings screens 35 advanced tasks 61 Advanced WAN (Internet) screens 36 Advanced Wireless screens 41 attached storage, accessing files on 68 back panel of extender 7 basic wireless settings 24 bottom of extender 8 box contents 5 button Close 35 On/Off 13 Reset 8 WPS 7, 28 73 GPL software 90 guest access 4, 61 icons, dashboard 21 installing the extender using a browser 13 using Easy Setup (Windows PC) 9 internal drive storage, accessing files on 68 Internet connection 23 security 4 Internet Security &Parental Controls screen 49 Kensington security slot LEDs back of extender front panel 7 CD, getting started with 9 changing admin password 67 closing an Advanced Settings screen connecting to the Internet 23 current settings 20 factory defaults, restoring FasTrack Plus 3 firmware updates 72 front of extenderl LEDs 7 35 MAC Filter screen 49 My Dashboard accessing during setup 14 current settings 22 My Net software for Mac computers My Net View 4, 79 17 dashboard icons 21 device not WPS enabled, connecting 29 DHCP server setup 75 dual band speed 3 28, Easy Setup for Windows computers 9 environmental compliance (China) 88 external storage, setting up 26 MY NET WI-FI RANGE EXTENDER USERS MANUAL obtaining service 88 obtaining service (Australia and New Zealand) 89 operating precautions 1 package contents 5 parental controls 4, 62 port forwarding 77 power adapters 6 product accessories 5 overview 3 INDEX recording information registration 2 safety information 1 warranty 88 Network UPnP 55 Parental Controls 49 Port Forwarding 53 Registration 59 Routing 53 System 58 Time Settings 57 Wi-Fi Protected Setup (WPS) 42 Wireless Setup 41 service 88 service (Australia /New Zealand) 89 settings advanced 35 basic 20 storage 26 settup PC) 10 setup options 10 Windows Vista/Win7 9 Windows XP 9 sharing a printer on the network 80 software, GPL 90 speed, wired 3 storage attached USB drive 68 capacity 4 internal drive 68 settings 26 rebooting 73 recording product information 2 registering the extender 2 regulatory compliance 84 remote access 4 Remote Access screens 48 Reset button 8 restoring to factory defaults 73 RoHS 88 extender as an access point 74 back panel 7 components, views, LEDS 6 front LEDs 7 front panel 6 installation 10 port LEDs 7 USB ports 3 wired speed 3 wireless speed 3 safety instructions 1 screens Admin 56 Administrator 57 Advanced lan 43 ALG 53 Connection Check 58 Device and Client Tables 44 Device Mode 59 DHCP Server Settings 44 DMZ 49 Dynamic DNS 40 Enhanced WMM (My Net N900) FasTrack Plus QoS 54 Firewall 48 Firmware Update 58 Guest Access 43 Host and Lan Settings 44 Internet status 36 IPv6 40 IPv6 Status 40 Language 59 Log 59 MAC Filter 49 MY NET WI-FI RANGE EXTENDER USERS MANUAL tasks advanced 61 basic 20 troubleshooting 83 updating firmware 72 UPnP configuration 77 55 warranty 88 warranty, Australia/New Zealand 89 WD Print Share 4, 80 WD Print Share, installing on a Mac 81 WD Print Share, installling on a Windows computer 80 WD Print Share, using 81 WD Quick View accessing stored filee 68 description 4 INDEX WD Smartware 5 Wi-Fi Protected Security(WPS) 4 wireless adding devices 28 settings 24 speed, simultaneous dual band 3 WPS LED 7 WPS-enabled device, connecting 28 Index1 WDÂŽ Service and Support5 Setting up the Bridge in AP Mode25 Troubleshooting DO THESE APPLY?27 Regulatory and Warranty Information28 Regulatory Compliance28 Important User Information1 Warranty Information (All Regions Except Australia/New Zealand)32 Important Safety Instructions1 Warranty Information (Australia/New Zealand only)33 Recording Your WD Product Information GNU General Public License (âGPLâ)34 Registering Your WD Product 2 Product Overview3 Introduction3 10 Appendix: Technical Specifications79 11 80 Features3 Package Contents3 Components5 Getting Started8 Setting up the Bridge with a WPSEnabled Router8 Setting up Your bridge Manually10 Configuring Basic Settings14 Opening My Dashboard After Setup14 Configuring Wireless Settings 17 Adding a Wireless Device to Your Network .19 21 Configuring Advanced Settings Resetting and Rebooting the Bridge23 Updating the Bridgeâs Firmware24 MY NET WI-FI RANGE EXTENDER USERS MANUAL Information furnished by WD is believed to be accurate and reliable; however, no responsibility is assumed by WD for its use nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of WD. WD reserves the right to change specifications at any time without notice. Western Digital, WD and the WD logo are registered trademarks in the U.S. and other countries; My Net is a registered trademark of Western Digital Technologies, Inc. Adobe and Adobe Reader and the included Adobe Reader logo are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Other marks may be mentioned herein that belong to other companies. Š 2012 Western Digital Technologies, Inc. All rights reserved. Western Digital 3355 Michelson Drive, Suite 100 Irvine, California 92612 U.S.A. 4779-705090-A00-cert Aug 2012
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : Tech Pubs Create Date : 2012:08:02 16:41:05Z Keywords : ???? Modify Date : 2012:10:17 20:28:49+08:00 Subject : My Net AC1300 Wi-Fi Range Extender Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : FrameMaker 8.0 Metadata Date : 2012:10:17 20:28:49+08:00 Format : application/pdf Creator : Tech Pubs Description : My Net AC1300 Wi-Fi Range Extender Title : My Net AC1300 Wi-Fi Range Extender User Manual Document ID : uuid:9f06ed75-0044-493b-b496-4733104d3c5e Instance ID : uuid:1581c388-b9c2-4c78-8060-41992b4fd45a State : 1 Version : 1.1 Page Mode : UseOutlines Page Count : 88EXIF Metadata provided by EXIF.tools