Cyberpower Cp600Lcd Users Manual
CP900AVR to the manual 730dd8c6-8afa-4c83-a4a7-64e9d0958580
2015-01-23
: Cyberpower Cyberpower-Cp600Lcd-Users-Manual-221204 cyberpower-cp600lcd-users-manual-221204 cyberpower pdf
Open the PDF directly: View PDF 
.
Page Count: 1
| Download | |
| Open PDF In Browser | View PDF |
Intelligent LCD Series Professional Tower Series MODEL: CP600LCD, CP825LCD, CP800AVR, CP685AVR-G, CP825AVR-G, CP685AVRLCD-G, CP825AVRLCD-G 1 3 3 4 + + - 1. Place the UPS on its top and remove the retaining screw (figure 1). 2. Slide the battery compartment cover completely off of the unit (figure 2). 3. Remove the battery from the compartment and disconnect the battery wires from the battery. Install the replacement battery by connecting the red wire to the positive (+) terminal and the black wire to the negative (-) terminal of the battery. (figure 3) 4. Slide the battery compartment cover over the battery and tighten the retaining screw. 5. Charge the unit for 4 – 8 hours to ensure the UPS performs expected runtimes. 2 - 2 1 MODEL: PP800SW MODEL: CP850AVRLCD, CP1000AVRLCD 3 - 2 + 1 - + BATTERY REPLACEMENT 1. Place the UPS on its side and locate the battery compartment cover on the bottom of the UPS. Remove the four (4) retaining screws and pull the battery compartment cover off the UPS (figure 1 & 2). 2. Remove the battery from the compartment and disconnect the battery wires from the batteries. Install the replacement batteries by connecting the red wire and black wire to the same color wires from the battery pack. Put the battery pack into the compartment (figure 3). 3. Slide the battery compartment cover over the battery and tighten the retaining screw. Charge the unit for 4 – 8 hours to ensure the UPS performs expected runtimes. 1. Carefully placed the UPS on its side. Remove the 2 retaining screws then push the battery cover backward and remove the cover. 2. Disconnect the battery wires from the battery, and then remove the battery from the compartment. REMINDER: For PP800/PP1100/PP1500T, 2 batteries are attached with one single plastic strip. You can pull the plastic strip to pull out the battery. 3. Install the replacement battery by connecting the red wire to the positive (+) terminal of the battery and connecting the black wire to the negative (-) terminal of the battery. 4. Slide the battery back into the compartment. Carefully turn the UPS upside down to help the batteries slide all the way into the compartment. Replace the cover and the retaining screws. Recharge the unit for 4 – 8 hours to ensure the UPS performs expected runtime. K09-0000065-00 AVR Series MODEL: CP900AVR, CP1200AVR, CP1500AVRT, CP1285AVRLCD, CP1350AVRLCD, CP1500AVRLCD MODEL: PP1500SWT4, PP2200SW 1 1 2 2 3 4 5 6 3 4 BATTERY REPLACEMENT 1. Place the UPS on its side to locate and remove the front panel retaining screws from the bottom of the UPS. 2. Slide the cover (front panel) towards the bottom of the UPS. 3. Remove it from the unit. 4. Disconnect the cable located at the top of the cover. 5. Disconnect the battery wires from the batteries. 6. Remove the batteries from the compartment. 7. Install the replacement batteries by connecting the red and black wires to the same color wires from the battery pack. Put the battery pack back into the compartment. 8. Replace the battery compartment cover and tighten the retaining screw. Charge the unit for 4-8 hours to ensure the UPS performs expected runtimes. K09-0000065-00 1. Carefully turn the UPS on its side. Remove the 6 retaining screws and the cover. 2. Disconnect the black and red cable from the battery set. 3. Remove the battery protection cover and take the battery pack out of the compartment. 4. Slide a new battery pack into the unit. Assemble the battery protection cover,cable, screws in the reverse order of the previous steps. Recharge the unit for 4-8 hours to ensure the UPS performs expected runtime.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Creator Tool : Adobe InDesign CS6 (Macintosh) Create Date : 2013:04:30 15:51:47-05:00 Metadata Date : 2013:04:30 15:51:51-05:00 Modify Date : 2013:04:30 15:51:51-05:00 Instance ID : uuid:387d83a0-5ff4-d842-8049-e8ceac12bcb4 Original Document ID : xmp.did:02801174072068118A6DC09AD27E809D Document ID : xmp.id:03801174072068118A6DC09AD27E809D Rendition Class : proof:pdf History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2013:04:30 15:51:47-05:00 Derived From Instance ID : xmp.iid:02801174072068118A6DC09AD27E809D Derived From Document ID : xmp.did:02801174072068118A6DC09AD27E809D Derived From Original Document ID: xmp.did:02801174072068118A6DC09AD27E809D Derived From Rendition Class : default Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 1 Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools