Cygnett CYG Go Stick User Manual GoStick Instructions2

Cygnett Pty Ltd Go Stick GoStick Instructions2

User Manual

GoStickBLUETOOTHSELFIE-STICKFOR SMARTPHONES AND GoPro® MOUNTCOMPATIBLE CAMERASPhone mountPlace your smart phone or camera in the clip by lifting the tab at the top and gently placing it on your phone until it is tight and secure. Pull the spring mounted phone holder and release with phone in place to hold your phone tightly.Pairing your shutter button with your Apple or Android device is easy.1. Switch button on the side of the remote to ‘ON’, and a light will flash blue. Then go to your smartphone’s Bluetooth settings, ensure Blutooth is turned on, and select for ‘AB Shutter 3’ when it appears. a. iOS/Apple: Settings > Bluetooth > Turn Bluetooth on. It will autmatically start searching for devices. b. Android: Menu > Settings > Wireless & Network > Bluetooth settings > turn Bluetooth on by checking box. Then select ‘Search for Devices’.2. You’re now ready to use the Selfie Stick. Use the corresponding shutter button on the remote to activate the shutter button. Compatible with Android 4.2.2 OS or newer and iOS 6.0 or newer.In the event of an incompatibe version of Android OS, Cygnett recommends theCamera 360 Ultimate* app, available on Android and iOS platforms. Mini tripodExtend 3 legs and place on flat ground for hands-free selfies or video. CAUTION: Do not use on uneven ground. Do not use in windy conditions. Any damage done to the digital device or accessory as a result of the tripod falling over will not be covered by Cygnett.Twist and lock extendable pole. Twist left and pull apart to extend, and then twist right to lock in place. Reverse to close and lock.GoPro MountMount your GoPro in the mount provided, but replace the tightening screw at the base of the phone mount with the extra-long adjusting screw.*TheCamera 360 Ultimate app is the property of PinGuo Inc. and/or its affiliates.CMYK PROCESS PANTONE021CFOLDFOLDFOLD FOLDchanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Email: info@cygnett.comPhone: (03) 9912 9121Address: Level 1, 664 Lorimer Street Port Melbourne, Victoria, Australia 3207

Navigation menu