Cylan Technology DOG-3G72 Clever Dog Smart Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2882326
Application ID	tQNA+vSImTAcCqJjAlCCxA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.93kB (211594 bits)
Date Submitted	2016-01-24 00:00:00
Date Available	2016-01-24 00:00:00
Creation Date	2015-11-20 07:37:00
Producing Software	Microsoft Office Word 2007
Document Lastmod	2015-11-20 07:37:00
Document Title	User manual
Document Creator	Microsoft Office Word 2007
Document Author:	zszq

Appearance
Before installation, please read the whole instruction below, and operate
as the instruction.
1. WiFi indicator
2. 3G indicator
3. Power indicator
4. Microphone
5. WiFi button
6. Power button
7. Micro SD card reader
8. SIM card reader
9. USB power cable connector
10.PUSH button (Press the button, separate the camera and support
frame)
11.
12.Screw hole (suspension installation)
User Guide
1. Give power to the device
Kindly use 5.0V---1.5A or 5.0V---2.0A adapter to charge at the fi
rst time,and keep charging time longer than one hour. Camera c
ould be working with power as well as power interrupt when fini
sh charging
2. Install APP
Please scan OR code at the bottom of the package, download the APP.
3. Sign up and sign in
Open APP, click ‘sign up’ to register, sign in if you already have an
account.
4. Add device
a) After sign up and sign in successfully, you will see home page,
click the sign ‘+’, and then choose ‘camera’.
b) After connecting device with power supply, please make sure the
WiFi indicator is blue blinking. If not, Please press and hold the
WiFi button for a few seconds until WiFi indicator is blue blinking,
and then click ‘WiFi blue flashing lights’
Click ‘!’ view the LED indicator state description.
c) Add device
• Android Phone: On the page of ‘search’, choose new device
you want to add.
• iPhone: via ‘Settings’>‘WLAN’ on your iPhone, connect to
‘DOG-00***’, then come back to here, click ‘next’
d) On the page of ‘Setting WiFi’, select a network to connect, type the
password, then click ‘Next’.
Note:
1.3G version supports 3G SIM card. Once 3G card be inserted, it will pass
the step of 【Set WiFi】automatically.
2.It will be better set a available Wifi if no 3G card inside,and it is normal p
henomenon if the cellphone network switch automatically during setting
e) Add successfully, click ‘Done’, then start using.
5. Watching video
On the page of ‘Home’, click and come into ‘real-time video’
Click ‘play’, then you watch real-time video, click ‘pause’, you can stop
the video display.
Click icon ‘Settings’, go to the page of ‘Function Settings’
6. Smart camera DOG-1W Indicator state
DOG-1W(WiFi)
State
Instruction
The power light is on
Be connected to power supply
WiFi Indicator is blue
blinking
WiFi Indicator is red
blinking slowly
WiFi Indicator is blue all
the time
WiFi Indicator is blinking
Be ready to connect with a mobile
device
Fail to connect to a WiFi
Connect to WiFi successfully
System upgrading
between color red and blue
7. Parameters
Items
Specification
Product Model
DOG-1W
Outlook
gray, blue, pink, orange
Lens
HD camera, support videoing day and night
Video
H.264(CODEC), 720*576@15fps(resolution)
Voice
Microphone and speaker inside
Night Vision
Automatically enable infrared induction under
low illumination
WiFi
IEEE802.11b, IEEE802.11g, IEEE802.11n
SIM card
GSM 850/1800/1900、W-CDMA
2100MHz/850MHz
Extensible Space
Micro SD card, it can store 7 days video with
32G
Power Supply
Micro USB, Input 5V---500mA
Working enviroment
Temperature:-10~60°, Humidity:<90﹪
Size
85*85*110mm
FCC Statement Warning
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on. The user is encouraged
to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into and outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate
the equipment. The distance between user and products should be no less than 20cm.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 6
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : zszq
Creator                         : Microsoft Office Word 2007
Create Date                     : 2015:11:20 07:37:00
Modify Date                     : 2015:11:20 07:37:00
Producer                        : Microsoft Office Word 2007

EXIF Metadata provided by EXIF.tools