D Link AP1320B1 Wireless Range Extender N300 User Manual

D Link Corporation Wireless Range Extender N300

User manual

DAP-1320User ManualWireless Range Extender N300Version 2.0 | 05/5/2014
iD-Link DAP-1320 User ManualD-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.Manual RevisionsTrademarksD-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.Copyright © 2014 by D-Link Corporation.All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc.This purpose of this product is to create a constant network connection for your devices. As such, it does not have a standby mode or use a power management mode. If you wish to power down this product, please simply unplug it from the power outlet. Revision Date Description2.0 May 5th, 2014 • Initial releasePreface
iiD-Link DAP-1320 User ManualTable of ContentsIntroduction ....................................................................... 1Package Contents ......................................................................... 1System Requirements .................................................................2Introduction ................................................................................... 3Features .................................................................................... 3What is a Wireless Extender? ............................................4Hardware Overview ..................................................................... 5Front/Top ................................................................................. 5Side and Bottom ................................................................... 6Wireless Installation Factors ..................................................... 7Setting Up Your DAP-1320 ................................................ 8QRS Mobile App Setup ............................................................... 9Web-based Conguration .......................................................13Setup Wizard ....................................................................14Using the WPS Method ....................................................16Using the Manual Method ..............................................17Home Screen ........................................................................20Wi-Fi Settings .......................................................................22Extended Wi-Fi Settings ...................................................23Network Settings ................................................................24Advanced Settings ........................................................24Maintenance ................................................................................27Admin .....................................................................................27System ....................................................................................28Upgrade .................................................................................29Statistics .................................................................................30Connecting a Wireless Client ..........................................31WPS Button ...................................................................................31Connect to a Wireless Network .............................................32Windows® 8 ...........................................................................32WPA/WPA2 .......................................................................32Windows® 7 ...........................................................................34WPA/WPA2 .......................................................................34Windows Vista® ....................................................................37WPA/WPA2 .......................................................................38Windows® XP ........................................................................40WPA/WPA2 .......................................................................41Troubleshooting ..............................................................43Wireless Basics .................................................................45Tips ...................................................................................................46Technical Specications ..................................................47GPL Code Statement........................................................48Safety Statements ...........................................................63Table of Contents
1D-Link DAP-1320 User ManualSection 1 - Product OverviewIntroductionPackage ContentsDAP-1320 Wireless Range Extender N300 Wi-Fi Conguration CardIf any of the above items are missing from your package, please contact your reseller.
2D-Link DAP-1320 User ManualSection 1 - Product OverviewNetwork Requirements• A wireless router with an active Internet connection. • IEEE 802.11n, 802.11g, or 802.11b wireless clients/devicesWeb-based Conguration Utility RequirementsComputer or Mobile Device with the following:• A Windows®, Macintosh, Android, or Linux-based operating system • Wireless adapter or Wi-Fi functionalityBrowser Requirements:• Internet Explorer 7 or later• Firefox 12.0 or later• Safari 4 or later• Google Chrome 20.0 or laterSystem Requirements
3D-Link DAP-1320 User ManualSection 1 - Product OverviewIntroductionFeaturesEasily Extend Your Existing NetworkThe DAP-1320 Wireless Range Extender N300 lets you extend a secure wireless network throughout your home. Connect the DAP-1320 to a router and share your high-speed Internet access in more places throughout your home or small oce. High-speed Wireless Performance With Wireless N TechnologyThanks to the latest Wireless N technology, the DAP-1320 provides a wireless connection at up to 300 Mbps* with other 802.11n wireless devices. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio with smooth performance. Simple SetupThrough its easy-to-use web-based user interface, you can quickly and easily connect the DAP-1320 to an uplink router, congure the extender wireless network, and manage the administrative settings. The setup wizard will even guide you through the setup process, getting your extended wireless network up and running in no time. CompatibilityThe DAP-1320 is still fully compatible with the IEEE 802.11g/b standards, so it can still connect with your older 802.11g/b devices.Latest Wireless Network Security and EncryptionThe DAP-1320 supports wireless security features to prevent unauthorized access, be it from over the wireless network or from the Internet. Support for WPA/WPA2 standards ensure that you’ll be able to use the best possible encryption methods with your compatible wireless devices. * Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.
4D-Link DAP-1320 User ManualSection 1 - Product OverviewWhat is a Wireless Extender?The DAP-1320 acts as a repeater to extend the range of an existing wireless network to provide better signal for parts of your home or oce that may have poor or no reception. Your existing wireless signal will be re-broadcast by the DAP-1320, allowing you to reach the farthest corners of your home or oce . The extended network can simply use the same network credentials as the existing network, or you can specify a dierent network name and password, giving you the exibility to control network access. Mobile Device ComputerWireless RouterInternetDAP-1320
5D-Link DAP-1320 User ManualSection 1 - Product OverviewHardware OverviewFront/TopLED Indicator Color Status DescriptionPower/StatusGreen Solid Green The device is powered ON and operating normallyBlinking Green The device is processing WPSRedSolid Red Device is powering ON or system is defectiveBlinking Red The device is in recovery mode or the device has malfunctionedOrangeBlinking Orange Cannot connect or provision an IP address from the uplink routerSolid Orange Connection quality is poor due to poor receptionNone O Device is not receiving power. Check the power outlet. 11LED Indicator This indicates the current status of the DAP-1320, as detailed in the table below.
6D-Link DAP-1320 User ManualSection 1 - Product OverviewHardware OverviewSide and Bottom1WPS Button Pressing the WPS button for 1 second allows you to connect with Wi-Fi clients using Wi-Fi Protected Setup.2Reset Button Pressing the reset button will reset the DAP-1320 to the factory default settings.12
7D-Link DAP-1320 User ManualSection 2 - CongurationWireless Installation FactorsThe Wireless Range Extender N300 lets you extend the reach of your existing wireless network, allowing you to work wirelessly from more places in your home or oce. Keep in mind, however, that the number, thickness, and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Keep the number of walls and ceilings between the extender and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range by up to 98 feet (30 meters). Position your devices so that the number of walls or ceilings is minimized.2. Be aware of the direct line between network devices. At a 45-degree angle, a wall that is 0.5 meters thick (1.5 feet) appears to be almost 1 meter (3 feet) thick. At a 2-degree angle it can appear over 14 meters (45 feet) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building materials make a dierence. A solid metal door or aluminum studs may have a negative eect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete can degrade your wireless signal.4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
8D-Link DAP-1320 User ManualSection 2 - CongurationSetting Up Your DAP-1320Plug in the DAP-1320 to a power outlet. Verify that the power LED is blinking orange before continuing.OutletEthernetThere are two ways to congure your DAP-1320; using the QRS Mobile app on your smartphone or tablet device, or using the web GUI on your computer.For detailed information on either of the methods for conguring your DAP-1320, refer to the following sections of the manual:• “QRS Mobile App Setup” on page 9• “Web-based Conguration” on page 13Locate the Wi-Fi name (SSID) and password for your DAP-1320 device. These details are printed on the specication sticker on the underside of the device. Using your computer or mobile device’s Wi-Fi connection utility, connect to the SSID of your DAP-1320 and enter the password. If you are unsure of how to connect to a wireless network, please refer to “Connect to a Wireless Network” on page 32, or consult your device’s user manual. Once connected, you are ready to begin the setup process.
9D-Link DAP-1320 User ManualSection 2 - CongurationQRS Mobile App SetupSearch for “QRS Mobile” in the App Store or Google Play, or use your mobile device to scan the QR codes on the right to download the QRS Mobile app from the App Store (left) for your iOS device, or from Google Play (right) for your Android device.For iOS For AndroidConnect to the Wi-Fi network that is displayed on the Wi-Fi Conguration Card included in your package (ex: dlink-a8fa). Then, enter the Wi-Fi password also printed on the Wi-Fi Conguration Card (akbdj1936). The DAP-1320 can be set up from your iOS or Android smartphone or tablet device using the QRS Mobile app.
10D-Link DAP-1320 User ManualSection 2 - CongurationOnce your mobile device is connected, tap on the QRS Mobile icon.Click Start to continue. QRS Mobile will rst detect your DAP-1320, then scan for available Wi-Fi networks. Select the network you wish to extend and enter the password if required.
11D-Link DAP-1320 User ManualSection 2 - CongurationEnter a network name (SSID) and password for the extended Wi-Fi network. You may keep the existing SSID and password if you wish. Click Next to continue. Create an admin password for the DAP-1320’s Web-based conguration utility. Click Next to continue.
12D-Link DAP-1320 User ManualSection 2 - CongurationA summary of your settings will be displayed. Click Save to reboot the device and to complete the setup. After the setup wizard is complete, the following screen will appear. You can now change your mobile device and laptop Wi-Fi settings to the wireless network name and password you just created.
13D-Link DAP-1320 User ManualSection 2 - CongurationWeb-based CongurationEnter your password. By default, Admin is selected as the username and cannot be changed, and by default, the password is blank.To access the conguration utility for the DAP-1320 on your PC, rst connect to the DAP-1320 wirelessly using the Wi-Fi name (SSID) and password located on your Wi-Fi Conguration Card. Then open a web browser and enter http://dlinkap.local. in the address bar. You can also use the IP address http://192.168.0.50.Note: If you have multiple DAP-1320 devices on the network, you can access web-based conguration via http://dlinkapxxxx.local. as shown in the included Wi-Fi Conguration Card, with “xxxx” being the last four digits of the DAP-1320’s MAC address. The conguration interface will open, and you can congure the various settings for the DAP-1320. If you have not yet congured and uplink network, the home screen will show that there is no connection between the DAP-1320 and the uplink router. For detailed information on manually setting up your DAP-1320 to extend an existing wireless network, refer to “Using the Manual Method” on page 17.
14D-Link DAP-1320 User ManualSection 3 - Web-based CongurationSetup WizardIf you wish to congure your extender to connect to the Internet using the setup wizard, click the Setup Wizard button.This wizard is designed to guide you through a step-by-step process to congure your new Wireless Range Extender N300 to extend your wireless network and connect to the Internet.Click Next to continue. If you already have a Wi-Fi network set up and you want to congure your Wi-Fi network settings manually, go to Settings at the top of your browser window and select Wi-Fi from the drop-down menu (refer to “Wi-Fi Settings” on page 22) to set up the connection between your DAP-1320 and the uplink router. To set up the extended Wi-Fi network, select Extended Wi-Fi (refer to ”Extended Wi-Fi Settings” on page 23).
15D-Link DAP-1320 User ManualSection 3 - Web-based CongurationSelect whether you want to use the WPS (Wireless Protected Setup) method or the manual method to set up an extended wireless network using your DAP-1320 and click Next. If you wish to use the WPS method, please refer to “Using the WPS Method” on page 16.If you wish to use the manual setup method, please refer to “Using the Manual Method” on page 17.
16D-Link DAP-1320 User ManualSection 3 - Web-based CongurationTo set up using the WPS method, select the rst option from the setup wizard menu. Click Next to continue.The DAP-1320 uses the push-button method for WPS. After selecting WPS, the DAP-1320 will ask you to press the WPS push button on the access point or router you want to connect the DAP-1320 to. You have 120 seconds to press the button on your access point or router. Click Next to continue.If a connection has been successfully made, you will see a notice on the screen and the LED on the device will turn solid green.If the LED is lit solid amber after the connection process has nished, the DAP-1320 has established a poor quality connection. To improve the connection quality, the DAP-1320 should be relocated to a wall outlet closer to the source wireless router or AP.You can also use the WPS button on the side of the DAP-1320 to initiate a WPS connection with the uplink router. After pressing the WPS button on the DAP-1320, you will have 120 seconds to press the WPS button on your access point or router. The LED on the DAP-1320 will turn solid green when a connection has been successfully established with the uplink router.Using the WPS Method WPS Button
17D-Link DAP-1320 User ManualSection 3 - Web-based CongurationThe DAP-1320 will rst scan for available Wi-Fi networks and list the networks it has found. If the network you would like to connect to isn’t listed, click Back and select the manual option again to perform another scan. Once you have selected the uplink network you wish to use, click Select.Using the Manual Method To set up your network manually, select the second option from the setup wizard menu. Click Next to continue.
18D-Link DAP-1320 User ManualSection 3 - Web-based CongurationThe DAP-1320 will re-broadcast the Wi-Fi connection from the uplink router as an extended Wi-Fi network. Enter the SSID and password that you wish to apply to the extended Wi-Fi network. If you would like the uplink router Wi-Fi network and the extended Wi-Fi network to have the same SSID and password, check the box at the bottom of the screen. Click Next to continue, or click Back to return to the previous step.Enter the password for your uplink network. Click Next to continue, or click Back to return to the previous step.
19D-Link DAP-1320 User ManualSection 3 - Web-based CongurationThe setup process is now complete. A summary page will appear showing the settings for both the connection to the uplink router, and the extended Wi-Fi network. It is recommended that you make a record of this information for future reference. Click Save to exit the wizard and return to the home screen.Or, click Back to return to the previous step.
20D-Link DAP-1320 User ManualSection 3 - Web-based CongurationHome ScreenThe home screen gives a summary of the current status of devices connected to the DAP-1320. A green check between devices indicates that there is an active connection. A red cross indicates that there is no connection present, or there is a connection error. At any time, you can click on the device images on the home screen to view the current status of each device.
21D-Link DAP-1320 User ManualSection 3 - Web-based CongurationIf there is no connection between the DAP-1320 and the uplink router, you can click on the uplink router icon to search for an available uplink router. You can view the details of both the uplink router network and the extended Wi-Fi network by clicking on the DAP-1320 icon.
22D-Link DAP-1320 User ManualSection 3 - Web-based CongurationWi-Fi SettingsThis is set to Repeater mode and cannot be changed. Click Scan to scan for available wireless networks and select the one you want to use the DAP-1320 to extend.You can also type in the name (SSID) of the wireless network.Select the security method that is being used by the wireless network that you have selected: WEP, WPA/WPA2, or None. If you selected WEP or WPA/WPA2, you will be required to enter the password or security key for the network you are attempting to join. You can also use WPS to connect your wireless devices to the DAP-1320’s extended network. For further information on how to do this, please refer to “Connecting a Wireless Client” on page 31.Click Save to save the settings and return to the home page. Wireless Mode:Wi-Fi Network Name (SSID):Security:Password:This page lets you congure the Wi-Fi settings to connect your DAP-1320 to another wireless network. This is the uplink network which the DAP-1320 will then be able to extend. To access this page, click on the Settings drop-down menu at the top of the page, and select Wi-Fi.
23D-Link DAP-1320 User ManualSection 3 - Web-based CongurationExtended Wi-Fi SettingsThis is the name of the DAP-1320’s extended network. The DAP-1320 will rebroadcast the uplink router’s Internet connection under this SSID. You can also choose to make the SSID for the extended network the same as the SSID for the uplink network. Select the type of wireless security you wish to use for the extended network. Choose None, WEP, or WPA/WPA2 Personal. Enter the password or network key that you wish to use for the extended network. You can also choose to make the password for the extended network the same as the password for the uplink network.Click Save to save the settings and return to the home page. Wi-Fi Name (SSID):Security:Password:This page lets you congure the settings for the DAP-1320’s extended wireless network. To access this page, click on the Settings drop-down menu at the top of the page, and select Extended Wi-Fi.
24D-Link DAP-1320 User ManualSection 3 - Web-based CongurationNetwork SettingsThis page lets you congure the network settings for the DAP-1320. To access this page, click on the Settings drop-down menu at the top of the page, and select Network. Click Save at any time to save the changes you have made on this page.Device Name: You can change the name of the device by editing the text in the text box. If you change the name of the device, you will need to enter “http://xxxx.local.” (where “xxxx” corresponds to the name of the device) in the address bar of your web browser in order to access the conguration utility. Advanced SettingsThe Advanced Settings section of the Network Settings page allows you to congure both IPv4 and IPv6 settings which will be used by the DAP-1320’s extended network. IPv4 Device Management interface - You can select either a Dynamic or Static IPv4 conguration:My LAN Connection is:IP Address:Subnet Mask:Gateway Address:Primary DNS Server:Secondary DNS Server:Here you can select whether you want the IP to have a Dynamic IP or Static IP address. If you select Dynamic IP, the options below will not be available. Enter the Static IP address that you want to assign to the extended network AP. This address should be outside of the uplink router’s DHCP address pool. Enter the subnet mask.Enter the gateway address. This is usually the IP address of the uplink router. Enter the address of the primary DNS server.Enter the address of the secondary DNS server. This is optional but will provide backup if the primary server fails.
25D-Link DAP-1320 User ManualSection 3 - Web-based CongurationIPv6 Device Management Interface - You can select an Autoconguration (dynamic), Static IP, or Link-local IPv6 conguration:My IPv6 Connection is:Obtain DNS Server Address:Primary DNS Server:Secondary DNS Server:Select Autoconguration (SLAAC/DHCPv6) to have the DAP-1320 automatically receive an IPv6 address from the uplink router. You can select to obtain IPv6 DNS server information automatically, or you can select to congure DNS servers manually.Enter the primary IPv6 DNS server address.Enter the secondary IPv6 DNS server address. This is optional but will provide backup if the primary server fails.My IPv6 Connection is:IPv6 Address:Subnet Prex Length:Default Gateway:Primary DNS Server:Secondary DNS Server:Select Static IPv6 to manually assign an IP address to the DAP-1320. Enter the IPv6 address that you want to assign to the extended network AP. This address should be outside of the uplink router’s DHCP address pool. Enter the length of the IPv6 subnet prex.Enter the default gateway. Enter the primary IPv6 DNS server address. Enter the secondary IPv6 DNS server address. This is optional but will provide backup if the primary server fails.
26D-Link DAP-1320 User ManualSection 3 - Web-based CongurationMy IPv6 Connection is:LAN IPv6 Link-Local Address:Select Link-local only to only set an IPv6 address for the local network. The link-local address of the DAP-1320.
27D-Link DAP-1320 User ManualSection 3 - Web-based CongurationThis page will allow you to set a new password for the administrator account used to congure the DAP-1320. You can also enable graphical authentication (CAPTCHA) on this page. To access this page, click on the Management drop down menu at the top of the page, and select Admin. Click Save at any time to save the changes you have made on this page.Enter the Admin password.Click on the slider to enable graphical authentication, or CAPTCHA. This provides an extra layer of security by requiring you to enter a code that is displayed on-screen. This can help prevent unauthorized users from gaining access to your wireless network using automated methods. Admin Password:Enable Graphical Authentication:MaintenanceAdmin
28D-Link DAP-1320 User ManualSection 3 - Web-based CongurationSave the system settings onto a le to the local hard drive. You will then see a le dialog where you can select a location and le name for the settings. Load the system settings from a le on the local hard drive.Restore the system settings to factory default settings. This will erase all currently stored settings. Click Reboot to reboot the DAP-1320.Save Settings To Local Hard Drive:Load Settings From Local Hard Drive:Restore to Factory Default Settings:Reboot the Device:SystemThis page allows you to save or restore your system conguration, reset or reboot the DAP-1320. To access this page, click on the Management drop down menu at the top of the page, and select System. Click Save at any time to save the changes you have made on this page.
29D-Link DAP-1320 User ManualSection 3 - Web-based CongurationUpgradeThis section displays the currently installed rmware version, as well as the date on which the current rmware version was released. Click Check For New Firmware to nd out if there is new or updated rmware. If there is, you can download it to your computer.This section will show the details of any language packs currently installed. Click Select File to locate the rmware le on your local device and perform a manual rmware upgrade. Click Select File to locate a language pack le on your local device and add the language pack to the user interface. Firmware Information:Check For New Firmware:Language Pack Information:Upgrade Firmware:Add a Language Pack:Firmware and language upgrades may be provided for the DAP-1320 in future. You can check for and upgrade your rmware and language pack on this page. To access this page, click on the Management drop down menu at the top of the page, and select Upgrade. Click Save at any time to save the changes you have made on this page.
30D-Link DAP-1320 User ManualSection 3 - Web-based CongurationThis page displays details about your wireless and network connections. To access this page, click on the Management drop down menu at the top of the page, and select Statistics.StatisticsWi-Fi:Extended Wi-Fi:Clear:Click on the Wi-Fi tab to display the statistics for the connection between the DAP-1320 and the uplink router. Click on the Extended Wi-Fi tab to display the statistics for the connection between the DAP-1320 and any connected clients. . Click the Clear button to reset the statistics.
31D-Link DAP-1320 User ManualSection 4 - Connecting a Wireless ClientConnecting a Wireless ClientWPS ButtonWPS (Wi-Fi Protected Setup) is a simple and secure way to connect your wireless devices with the DAP-1320. Most wireless devices such as wireless routers, media players, printers, and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DAP-1320. Please refer to the user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:Step 1 - Press the WPS button on the DAP-1320 for about 1 second. The LED on the device will start to blink. You can also use the WPS option in the setup wizard section of the web interface. Step 2 - Within 120 seconds, press the WPS button on your wireless device.Step 3 - Allow up to 1 minute to congure. Once the LED light stops blinking and turns solid green, you will be connected and your wireless connection will be secured with WPA2.
32D-Link DAP-1320 User ManualSection 4 - SecurityWindows® 8WPA/WPA2It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used.To join an existing network, locate the wireless network icon in the taskbar, next to the time display. Wireless IconClicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the desired network by clicking on the network name.Connect to a Wireless Network
33D-Link DAP-1320 User ManualSection 4 - SecurityYou will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router at this point to enable the WPS function. When you have established a successful connection with a wireless network, the word Connected will appear next to the name of the network to which you are connected.
34D-Link DAP-1320 User ManualSection 4 - Connecting a Wireless ClientWindows® 7It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.1. Click on the wireless icon in your system tray (lower-right corner).2. The utility will display any available wireless networks in your area.Wireless IconWPA/WPA2
35D-Link DAP-1320 User ManualSection 4 - Connecting a Wireless Client3. Highlight the wireless network (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.4. The following window appears while your computer tries to connect to the router.
36D-Link DAP-1320 User ManualSection 4 - Connecting a Wireless Client5. Enter the same security key or passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
37D-Link DAP-1320 User ManualSection 4 - Connecting a Wireless ClientWindows Vista®Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows Vista® utility as seen below.Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network.If you receive the “Wireless Networks Are Available” bubble, click on the center of the bubble to access the utility. orThe utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click Connect.If you get a good signal but cannot access the Internet, check the TCP/IP settings for your wireless adapter. Refer to “Troubleshooting” on page 43 for more information.
38D-Link DAP-1320 User ManualSection 4 - Connecting a Wireless ClientWPA/WPA2It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.2. Highlight the wireless network (SSID) you would like to connect to and click Connect.1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network.
39D-Link DAP-1320 User ManualSection 4 - Connecting a Wireless Client3. Enter the same security key or passphrase that is on your router and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
40D-Link DAP-1320 User ManualSection 4 - Connecting a Wireless ClientWindows® XPWindows® XP users may use the built-in wireless utility (Zero Conguration Utility). The following instructions are for Service Pack 2 users. If you are using another company’s utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below.Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. orThe utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.
41D-Link DAP-1320 User ManualSection 4 - Connecting a Wireless ClientIt is recommended to enable WPA on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used.2. Highlight the wireless network (SSID) you would like to connect to and click Connect.1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. WPA/WPA2
42D-Link DAP-1320 User ManualSection 4 - Connecting a Wireless Client3. The Wireless Network Connection box will appear. Enter the WPA-PSK passphrase and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router.
43D-Link DAP-1320 User ManualSection 5 - TroubleshootingTroubleshootingThis chapter provides solutions to problems that can occur during the installation and operation of the DAP-1320. Read the following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a dierent operating system, the screenshots on your computer will look similar to the following examples.1. Why can’t I access the web-based conguration utility?When entering the IP address of the Wireless Range Extender N300 (dlinkap.local for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. • Make sure you have an updated Java-enabled web browser. We recommend the following: • Internet Explorer 7 or later• Firefox 12.0 or later• Safari 4 or later• Google Chrome 20.0 or later• Make sure that you are connected to the same wireless network which is listed on the base of the DAP-1320. If you have an active wired LAN Ethernet connection, try temporarily unplugging the Ethernet cable from the computer you are using, as this may eliminate possible conicts from having two simultaneous connections on the same computer. • Disable any Internet security software running on the computer. Software rewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows® XP rewall may block access to the conguration pages. Check the help les included with your rewall software for more information on disabling or conguring it.
44D-Link DAP-1320 User ManualSection 5 - Troubleshooting• Congure your Internet settings:• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.• Close your web browser (if open) and open it.• Access the web management interface. Open your web browser and enter the address of your extender (http://dlinkap.local) in the address bar. This should open the login page for your web management. If the DAP-1320 is not connected to an uplink router, you can try accessing the web interface using the default IP address http://192.168.0.50.• If you still cannot access the conguration, unplug the extender from the power outlet for at least 10 seconds and plug it back in. Wait about 30 seconds and try accessing the conguration. If you have multiple computers, try connecting using a dierent computer.2. What can I do if I forgot my password?If you forgot your password, you must reset your extender. Unfortunately this process will change all your settings back to the factory defaults.To reset the extender, locate the reset button (hole) on the underside panel of the unit. With the extender powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the extender will go through its reboot process (indicated by the LED turning red). Wait about 30 seconds to access the extender. The default IP address is http://dlinkap.local. When logging in, the username is admin and leave the password box empty.
45D-Link DAP-1320 User ManualAppendix A - Wireless BasicsD-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely and conveniently access your network. You will be able to enjoy the freedom that wireless networking delivers.A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and oce environments, and public areas such as airports, coee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more eciently. Increased mobility and the absence of cabling and other xed infrastructure have proven to be benecial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapters used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link.Wireless Basics
46D-Link DAP-1320 User ManualAppendix A - Wireless BasicsTipsHere are a few things to keep in mind when you are installing your Wireless Range Extender N300.Centralize the extender’s location For best performance, make sure you place the extender in a centralized location within your desired usage area. Try to place the extender so that there are minimal obstructions between it and the uplink router. If possible, use an elevated power outlet, so the signal can be dispersed more easily. If you have a large home or usage area, you may need several extenders in order to achieve optimal coverage. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the extender. This can signicantly reduce any interference that the appliances might cause since they operate on same frequency.Security Don’t let your neighbors or intruders connect to your wireless network. Secure your wireless network by utilizing the WPA or WEP security feature on the extender and uplink router. Refer to the relevant sections of this manual for further details.
47D-Link DAP-1320 User ManualAppendix B - Technical SpecicationsTechnical SpecicationsStandards• IEEE 802.11n• IEEE 802.11g• IEEE 802.11bWireless Frequency Range 1• 2.4 GHz to 2.4835 GHzAntenna• Internal AntennaSecurity• Wi-Fi Protected Access (WPA/WPA2)• WPS™ (PBC) • Wired Equivalent Privacy (WEP) 64/128-bit Advanced Features• QRS Mobile setup app for iOS and Android devices Device Management• Web UIDiagnostic LEDs• Status/WPSOperating Temperature• 0 to 40 ˚C (32 to 104 ˚F)Operating Humidity• 0% to 90% non-condensingPower Input• AC 110-240 VMaximum Power Consumption• 5.5 WCertications• EMI/EMC• FCC• CE• IC• C-Tick• UL• Wi-Fi CertiedDimensions• 48 x 42 x 53.5 mm (1.89 x 1.65 x 2.11 inches)Weight• 69 grams (0.152 lb)1 Frequency range varies depending on local regulations
48D-Link DAP-1320 User ManualAppendix C - GPL Code StatementGPL Code StatementThis D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at:http://tsd.dlink.com.tw/GPL.aspThe GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.WRITTEN OFFER FOR GPL AND LGPL SOURCE CODEWhere such specic license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code les via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL. Please direct all inquiries to:Email: GPLCODE@DLink.comSnail Mail:Attn: GPLSOURCE REQUESTD-Link Systems, Inc.17595 Mt. Herrmann StreetFountain Valley, CA 92708GNU GENERAL PUBLIC LICENSEVersion 3, 29 June 2007Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
49D-Link DAP-1320 User ManualAppendix C - GPL Code StatementPreamble The GNU General Public License is a free, copyleft license for software and other kinds of works.The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things.To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others.For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.Developers that use the GNU GPL protect your rights with two steps:(1) assert copyright on the software, and (2) oer you this License giving you legal permission to copy, distribute and/or modify it.For the developers’ and authors’ protection, the GPL clearly explains that there is no warranty for this free software. For both users’ and authors’ sake, the GPL requires that modied versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modied versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users’ freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users.
50D-Link DAP-1320 User ManualAppendix C - GPL Code StatementFinally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it eectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free.The precise terms and conditions for copying, distribution and modication follow. TERMS AND CONDITIONS0. Denitions.“This License” refers to version 3 of the GNU General Public License.“Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks.“The Program” refers to any copyrightable work licensed under this License. Each licensee is addressed as “you”. “Licensees” and “recipients” may be individuals or organizations.To “modify” a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a “modied version” of the earlier work or a work “based on” the earlier work.A “covered work” means either the unmodied Program or a work based on the Program.To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modication), making available to the public, and in some countries other activities as well.To “convey” a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying.An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion.
51D-Link DAP-1320 User ManualAppendix C - GPL Code Statement1. Source Code.The “source code” for a work means the preferred form of the work for making modications to it. “Object code” means any non-source form of a work.A “Standard Interface” means an interface that either is an ocial standard dened by a recognized standards body, or, in the case of interfaces specied for a particular programming language, one that is widely used among developers working in that language.The “System Libraries” of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A “Major Component”, in this context, means a major essential component (kernel, window system, and so on) of the specic operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it.The “Corresponding Source” for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work’s System Libraries, or general-purpose tools or generally available free programs which are used unmodied in performing those activities but which are not part of the work. For example, Corresponding Source includes interface denition les associated with source les for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specically designed to require, such as by intimate data communication or control ow between those subprograms and other parts of the work.The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source.The Corresponding Source for a work in source code form is that same work.
52D-Link DAP-1320 User ManualAppendix C - GPL Code Statement2. Basic Permissions.All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly arms your unlimited permission to run the unmodied Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law.You may make, run and propagate covered works that you do not convey, without conditions so long as your license oth-erwise remains in force. You may convey covered works to others for the sole purpose of having them make modications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you.Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary.3. Protecting Users’ Legal Rights From Anti-Circumvention Law.No covered work shall be deemed part of an eective technological measure under any applicable law fullling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures.When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumventionis eected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modication of the work as a means of enforcing, against the work’s users, your or third parties’ legal rights to forbid circumvention of technological measures.
53D-Link DAP-1320 User ManualAppendix C - GPL Code Statement4. Conveying Verbatim Copies.You may convey verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program.You may charge any price or no price for each copy that you convey, and you may oer support or warranty protection for a fee.5. Conveying Modied Source Versions.You may convey a work based on the Program, or the modications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions:a) The work must carry prominent notices stating that you modied it, and giving a relevant date.b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modies the requirement in section 4 to “keep intact all notices”.c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it.d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so.A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an “aggregate” if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation’s users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate.
54D-Link DAP-1320 User ManualAppendix C - GPL Code Statement6. Conveying Non-Source Forms.You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways:a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source xed on a durable physical medium customarily used for software interchange.b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written oer, valid for at least three years and valid for as long as you oer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge.c) Convey individual copies of the object code with a copy of the written oer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an oer, in accord with subsection 6b.d) Convey the object code by oering access from a designated place (gratis or for a charge), and oer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a dierent server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to nd the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements.e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being oered to the general public at no charge under subsection 6d.A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work.
55D-Link DAP-1320 User ManualAppendix C - GPL Code StatementA “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, “normally used” refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only signicant mode of use of the product.“Installation Information” for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modied versions of a covered work in that User Product from a modied version of its Corresponding Source. The information must suce to ensure that the continued functioning of the modied object code is in no case prevented or interfered with solely because modication has been made.If you convey an object code work under this section in, or with, or specically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a xed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modied object code on the User Product (for example, the work has been installed in ROM).The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modied or installed by the recipient, or for the User Product in which it has been modied or installed. Access to a network may be denied when the modication itself materially and adversely aects the operation of the network or violates the rules and protocols for communication across the network.Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying.
56D-Link DAP-1320 User ManualAppendix C - GPL Code Statement7. Additional Terms. “Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions.When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work). You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission.Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms:a) Disclaiming warranty or limiting liability dierently from the terms of sections 15 and 16 of this License; orb) Requiring preservation of specied reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; orc) Prohibiting misrepresentation of the origin of that material, or requiring that modied versions of such material be marked in reasonable ways as dierent from the original version; ord) Limiting the use for publicity purposes of names of licensors or authors of the material; ore) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; orf) Requiring indemnication of licensors and authors of that material by anyone who conveys the material (or modied versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors.
57D-Link DAP-1320 User ManualAppendix C - GPL Code StatementAll other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying.If you add terms to a covered work in accord with this section, you must place, in the relevant source les, a statement of the additional terms that apply to those les, or a notice indicating where to nd the applicable terms.Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way.8. Termination.You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11).However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and nally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation.Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder noties you of the violation by some reasonable means, this is the rst time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights
58D-Link DAP-1320 User ManualAppendix C - GPL Code Statementfrom you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10.9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so.10. Automatic Licensing of Downstream Recipients.Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License.An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party’s predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable eorts.You may not impose any further restrictions on the exercise of the rights granted or armed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, oering for sale, or importing the Program or any portion of it.
59D-Link DAP-1320 User ManualAppendix C - GPL Code Statement11. Patents.A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor’s “contributor version”.A contributor’s “essential patent claims” are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modication of the contributor version. For purposes of this denition, “control” includes the right to grant patent sublicenses in a manner consistent with the requirements of this License.Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor’s essential patent claims, to make, use, sell, oer for sale, import and otherwise run, modify and propagate the contents of its contributor version.In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To “grant” such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party.If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benet of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. “Knowingly relying” means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient’s use of the covered work in a country, would infringe one or more identiable patents in that country that you have reason to believe are valid.If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specic copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it.
60D-Link DAP-1320 User ManualAppendix C - GPL Code StatementA patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specic products or compilations that contain the covered work, unless you entered into that arrangement,or that patent license was granted, prior to 28 March 2007.Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law.12. No Surrender of Others’ Freedom.If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program.13. Use with the GNU Aero General Public License.Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Aero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Aero General Public License, section 13, concerning interaction through a network will apply to the combination as such.
61D-Link DAP-1320 User ManualAppendix C - GPL Code Statement14. Revised Versions of this License.The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may dier in detail to address new problems or concerns.Each version is given a distinguishing version number. If the Program species that a certain numbered version of the GNU General Public License “or any later version” applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program species that a proxy can decide which future versions of the GNU General Public License can be used, that proxy’s public statement of acceptance of a version permanently authorizes you to choose that version for the Program.Later license versions may give you additional or dierent permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version.15. Disclaimer of Warranty.THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.16. Limitation of Liability.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
62D-Link DAP-1320 User ManualAppendix C - GPL Code Statement17. Interpretation of Sections 15 and 16.If the disclaimer of warranty and limitation of liability provided above cannot be given local legal eect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee.
63D-Link DAP-1320 User ManualAppendix D - Safety StatementsSafety StatementsCE Mark Warning:This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.IMPORTANT NOTICE:Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Country Code selection feature to be disabled for products marketed to the US/CANADA Industry Canada statement:
64D-Link DAP-1320 User ManualAppendix D - Safety StatementsIC statementThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d’exposition aux radiations:Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Navigation menu