D Link AP2310A1 802.11n 2.4GHz Wireless AP User Manual DAP 2310
D Link Corporation 802.11n 2.4GHz Wireless AP DAP 2310
D Link >
User Manual
無線網路基地台
AirPremier N Access Point
2D-Link DAP-2310 User Manual
Table of Contents
Product Overview ........................................................ 4
Package Contents ................................................... 4
System Requirements ............................................. 4
Introduction .............................................................. 5
Features .................................................................. 7
Wireless Basics ........................................................... 8
Standards-Based Technology ................................. 9
Wireless Installation Considerations ...................... 10
Hardware Overview ...............................................11
Four Operational Modes ........................................... 13
Getting Started ...........................................................14
............................................................. 15
Save and Activate Settings .................................... 16
Basic Settings ........................................................17
Wireless ..........................................................17
Access Point mode ...................................... 17
WDS with AP mode .....................................19
WDS mode ................................................... 21
Wireless Client mode ...................................23
Open System/Shared Key Authentication ... 24
WPA/WPA2-Personal Authentication ........... 25
WPA/WPA2-Enterprise Authentication ........ 26
802.1x Authentication ................................... 27
LAN ................................................................. 28
Advanced Settings ................................................. 29
Performance .................................................... 29
Multi-SSID ........................................................ 31
VLAN ............................................................... 33
VLAN List .....................................................33
Port List ........................................................ 34
Add/Edit VLAN ............................................. 35
PVID Setting ................................................. 36
Intrusion ........................................................... 37
Schedule .......................................................... 38
QoS .................................................................. 39
AP Array ..........................................................41
Wireless Basic Settings ................................ 42
Wireless Advanced Settings ........................ 42
Multiple SSID & VLAN .................................. 43
Advanced Functions ..................................... 43
Administration Settings ................................ 43
................................ 44
DHCP Server .................................................. 45
Dynamic Pool Settings ................................. 45
Static Pool Setting ........................................ 47
Current IP Mapping List ............................... 49
Filters ............................................................... 50
Wireless MAC ACL ...................................... 50
WLAN Partition ............................................. 51
Status ...................................................................52
Table of Contents
3D-Link DAP-2310 User Manual
Table of Contents
Device Information ........................................... 52
Client Information ............................................. 53
WDS Information .............................................54
Stats ................................................................. 55
Ethernet ........................................................ 55
................................................ 56
Log ................................................................... 57
View Log ...................................................... 57
Log Settings ................................................. 58
Maintenance ......................................................... 59
Administration Settings .................................... 59
Limit Administrator ....................................... 60
System Name Settings ................................. 61
Login Settings .............................................. 62
Console Settings .......................................... 63
SNMP Settings ............................................. 64
................ 65
...................................... 66
Time and Date .......................................................67
System ............................................................. 68
System Settings ........................................... 68
Help ....................................................................... 69
Troubleshooting ........................................................ 70
Networking Basics .................................................... 72
Check your IP address .......................................... 72
Statically Assign an IP address ............................. 73
........................................... 74
4D-Link DAP-2310 User Manual
Section 1 - Product Overview
AirPremier® N Access Point
System Requirements
®, Macintosh®, or Linux-based operating systems with an installed Ethernet
Adapter
® Internet Explorer® 6.0 and higher
™ Chrome 2.0 and higher
Product Overview
Package Contents
Note: Using a power supply with a different voltage rating than the one included
with the DAP-2310 will cause damage and void the warranty for this product.
5D-Link DAP-2310 User Manual
Section 1 - Product Overview
Introduction
able to move across the network quickly.
Distribution System) with AP, WDS, or Wireless Client mode.
is backwards compatible with 802.11g and 802.11b devices.)
WPA-Personal and WPA2-Personal are directed towards home users who do not have the server-based equipment
offers per-packet dynamic hashing. It also includes an integrity checking feature which ensures that the packets were
not tampered with during wireless transmission.
WPA-Enterprise and WPA2-Enterprise are ideal for businesses that already have existing security infrastructures
6D-Link DAP-2310 User Manual
Section 1 - Product Overview
where an employee leaves the company, the network administrator is able to remove the previous employee from the
®
lower actual data throughout rate.
7D-Link DAP-2310 User Manual
Section 1 - Product Overview
Four different operation modes - Capable of operating in one of four different operation modes to meet your
Faster wireless networking with the 802.11n standard to provide a maximum wireless signal rate of up to 300
Mbps*.
Compatible with the 802.11b standard to provide a wireless data rate of up to 11Mbps, allowing you to migrate
range.
Better security with WPA -
Protected Access) to provide a much higher level of security for your data and communications than its previous
versions.
AP Manager II management software - The real-time display of the network's topology and AP’s information
SNMP for management - The DAP-2310 is not just fast, but also supports SNMP v.3 for better network
Supports one 10/100/1000M Ethernet port.
Features
8D-Link DAP-2310 User Manual
Section 2 - Installation
Wireless Basics
D-Link wireless products are based on industry standards to provide high-speed wireless connectivity that is easy to
use within your home, business or public access wireless networks. D-Link wireless products provides you with access
to the data you want, whenever and wherever you want it. Enjoy the freedom that wireless networking can bring to you.
Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards,
allowing wireless users to use the same applications as those used on a wired network.
Mobility - productivity increases when people can have access to data in any location within the operating range
of a worker.
Low implementation costs - WLANs are easy to set up, manage, change and relocate. Networks that frequently
wiring may be impractical.
Installation and network expansion - by avoiding the complications of troublesome cables, a WLAN system
can be fast and easy during installation, especially since it can eliminate the need to pull cable through walls
Inexpensive solution - wireless network devices are as competitively priced as conventional Ethernet network
modes.
Scalability
number of users to larger Infrastructure networks to accommodate hundreds or thousands of users, depending
on the number of wireless devices deployed.
9D-Link DAP-2310 User Manual
Section 2 - Installation
Standards-Based Technology
The IEEE 802.11n standard is an extension of the 802.11b and 802.11g standards that came before it. It increases
technology. OFDM works by splitting the radio signal into multiple smaller sub-signals that are then simultaneously
transmissions.
The D-Link DAP-2310 will automatically sense the best possible connection speed to ensure the greatest possible
speed and range.
IEEE 802.11n offers the most advanced network security features available today, including WPA.
10D-Link DAP-2310 User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link AirPremier® N wireless access point lets you access your network using a wireless connection from virtually
anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and
location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical
1. Keep the number of walls and ceilings between the access point and other network devices to a minimum.
2
of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect
on the range. Try to position access points, wireless routers, and computers so that the signal passes
through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation,
4
generate RF noise.
5
home security systems), your wireless connection may degrade dramatically or drop completely. Make
a signal even if the phone in not in use.
11D-Link DAP-2310 User Manual
Section 2 - Installation
Hardware Overview
Power LED
This light will be solid green when the unit is powered on.
WLAN LED
use.
LAN LED
Power Receptacle
The supplied power adapter connects here.
Reset Button
A pinhole button located beside the Ethernet socket is used to reset
the system or restore the factory default settings.
Note: After resetting the unit, you will still be able to access the
data on your hard drives.
LAN Port
An Ethernet port that connects the unit to a network.
12D-Link DAP-2310 User Manual
Section 2 - Installation
Wireless Client AP acts as a wireless network adapter for your Ethernet-
enabled device
Create a wireless LAN
WDS with AP Wirelessly connect multiple networks while still
functioning as a wireless AP
WDS Wirelessly connect multiple networks
Four Operational Modes
13D-Link DAP-2310 User Manual
Section 2 - Installation
Getting Started
2. Consult with your cable or DSL provider for proper installation of the modem.
4. If you are connecting a desktop computer to your network, install a wireless PCI adapter into an available
PCI slot on your desktop computer.
5. Install the drivers for your wireless CardBus adapter into a laptop computer.
14D-Link DAP-2310 User Manual
Network
Layout diagram
).
Launch your web browser.
http://192.168.0.50)
and press Enter. Make sure that the IP addresses of the DAP-2310 and your
computer are in the same subnet.
Note: If you have changed the default IP address assigned to the DAP-2310, make sure to enter the correct IP address.
adminLogin.
Note: If you have changed the password, make
sure to enter the correct password.
15D-Link DAP-2310 User Manual
button
located at the top of the page and then click Save and Activate.
Save and Activate Settings
16D-Link DAP-2310 User Manual
Basic Settings
Wireless
Access Point mode
Select Access Point from the drop-down
menu. The other three choices are WDS with
AP, WDS, and Wireless Client.
setting is dlink. The SSID can be easily
changed to connect to an existing wireless
network or to establish a new wireless network.
The SSID can be up to 32 characters and is
case-sensitive.
Enable or Disable SSID visibility. Enabling
this feature broadcasts the SSID across the
network, thus making it visible to all network
users.
Enabling this feature automatically selects the
channel that provides the best wireless performance. Enable is set by default. The channel selection process only occurs
when the AP is booting up.
setting to Disable, and then use the drop-down menu to make the desired selection.
Note: The wireless adapters will automatically scan and match the wireless settings.
Mode:
Network Name
(SSID):
SSID
Visibility:
Auto Channel
Selection:
Channel:
Wireless Band: Select 2.4GHz from the drop-down menu.
17D-Link DAP-2310 User Manual
Channel Width:
Authentication:
Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless
clients. Auto 20/40 MHz allows you to connect to both 802.11n and 802.11b/g wireless devices on your network.
Use the drop-down menu to choose Open System, Shared Key, WPA-Personal, WPA-Enterprise, or 802.11x.
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled,
this option is not available.
Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.
Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server.
Select 802.1x to secure your network using 802.1x authentication.
18D-Link DAP-2310 User Manual
WDS with AP mode
WDS with AP mode is selected from the drop-down
menu.
SSID’s factory default setting is dlink. The SSID can
be easily changed to connect to an existing wireless
network or to establish a new wireless network.
Enable or Disable SSID visibility. Enabling this feature
broadcasts the SSID across the network, thus making
it visible to all network users.
Enabling this feature automatically selects the channel
that will provide the best wireless performance. This
feature is not supported in WDS with AP mode. The
channel selection process only occurs when the AP
is booting up.
To change the channel, use the drop-down menu
adapters will automatically scan and match the
wireless settings.)
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Wireless Band:
In WDS with AP mode, the DAP-2310 wirelessly connects multiple networks while still functioning as a wireless AP.
Select 2.4GHz from the drop-down menu.
19D-Link DAP-2310 User Manual
Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks.
Click on the Scan button to search for available wireless networks, then click on the available network that you want to
connect with.
Use the drop-down menu to choose Open System, Shared Key, or WPA-Personal.
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled,
this option is not available.
Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.
Remote AP
MAC Address:
Site Survey:
Authentication:
20D-Link DAP-2310 User Manual
WDS mode
In WDS mode, the DAP-2310 wirelessly connects multiple networks, without functioning as a wireless AP.
WDS is selected from the drop-down menu.
setting is dlink. The SSID can be easily changed
to connect to an existing wireless network or to
establish a new wireless network.
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Enabling this feature automatically selects
the channel that will provide the best wireless
performance. This feature is not supported in
WDS mode.
All devices on the network must share the
same channel. To change the channel, use the
drop-down menu to make the desired selection.
Use the drop-down menu to choose 20 MHz or
Auto 20/40 MHz.
Enter the MAC addresses of the APs on your
network that will serve as bridges to wirelessly
connect multiple networks.
Mode:
Network
Name (SSID):
SSID
Visibility:
Auto Channel
Selection:
Channel:
Channel
Width:
Remote
AP MAC
Address:
Wireless Band: Select 2.4GHz from the drop-down menu.
21D-Link DAP-2310 User Manual
Click on the Scan button to search for available wireless networks, then click on the available network that you want to
connect with.
Use the drop-down menu to choose Open System, Shared Key, or WPA-Personal.
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that share the same WEP settings.
Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.
Site Survey:
Authentication:
22D-Link DAP-2310 User Manual
Wireless Client mode
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Site Survey:
Authentication:
Enable:
MAC Source:
MAC Address:
Wireless Band: Select 2.4GHz from the drop-down menu.
Wireless Client is selected from the drop-down menu.
setting is dlink. The SSID can be easily changed to connect to an
existing wireless network.
This option is unavailable in Wireless Client mode.
Enabling this feature automatically selects the channel that
will provide the best wireless performance. This feature is not
supported in Wireless Client mode.
The channel used will be displayed, and matches the AP that the
DAP-2310 is connected to when set to Wireless Client mode.
Use the drop-down menu to choose 20 MHz or Auto 20/40 MHz.
Click on the Scan button to search for available wireless networks,
then click on the available network that you want to connect with.
Use the drop-down menu to choose Open System or
WPA-Personal.
Select Open System to communicate the key across the network.
Select WPA-Personal to secure your network using a password
and dynamic key changes. No RADIUS server is required.
Check to enable clone MAC. This feature will allow you to change
the MAC address of the access point to the MAC address of a
client.
Select the MAC source from the drop-down menu.
Enter the MAC address that you would like to assign to the access
point.
23D-Link DAP-2310 User Manual
Open System/Shared Key Authentication
Encryption:
Key Type*:
Key Size:
Key Index (1-
4):
Key:
Use the radio button to disable or enable
encryption.
Select HEX or ASCII.
Select 64 Bits or 128 Bits.
Select the 1st through the 4th key to be the
active key.
select one of these keys in the Key Index
drop-down menu.
**Hexadecimal (HEX) digits consist of the numbers 0-9 and the letters A-F.
*ASCII (American Standard Code for Information Interchange) is a code that represents English letters using numbers ranging
from 0-127.
24D-Link DAP-2310 User Manual
WPA/WPA2-Personal Authentication
When WPA-Personal is selected for Authentication
type, you must also select a WPA mode from the
AUTO (WPA or WPA2), WPA2
Only, or WPA Only. WPA and WPA2 use different
algorithms. AUTO (WPA or WPA2) allows you to
use both WPA and WPA2.
When you select WPA-Personal, you must also
select AUTO, AES, or TKIP from the drop-down
menu.
Select the interval during which the group key will be
valid. The default value of 1800 is recommended.
Select Manual
Periodical Key Change to have
the access point automatically change your
PassPhrase. Enter the Activate From time and the
time in hours to change the key.
When you select WPA-Personal, please enter a
PassPhrase
WPA Mode:
Cipher Type:
Group Key
Update:
Periodical
Key Change:
PassPhrase:
25D-Link DAP-2310 User Manual
WPA/WPA2-Enterprise Authentication
When WPA-Enterprise is selected, you must
also select a WPA mode from the drop-down
AUTO (WPA or WPA2), WPA2 Only,
or WPA Only. WPA and WPA2 use different
algorithms. AUTO (WPA or WPA2) allows you
to use both WPA and WPA2.
When WPA-Enterprise is selected, you must
also select a cipher type from the drop-down
Auto, AES, or TKIP.
Select the interval during which the group key
will be valid. The recommended value is 1800.
A lower interval may reduce data transfer rates.
Enable or disable Microsoft Network Access
Protection.
Enter the IP address of the RADIUS server.
Enter the RADIUS port.
Enter the RADIUS secret.
WPA Mode:
Cipher Type:
Group Key
Update
Interval:
Network
Access
Protection:
RADIUS
Server:
RADIUS Port:
RADIUS
Secret:
26D-Link DAP-2310 User Manual
802.1x Authentication
Select the interval during which the group
300 is the recommended
value). A lower interval may reduce data
transfer rates.
Enter the IP address of the RADIUS server.
Enter the RADIUS port.
Enter the RADIUS secret.
Key Update
Interval:
RADIUS Server:
RADIUS Port:
RADIUS Secret:
27D-Link DAP-2310 User Manual
Static IP (Manual) is chosen here. Choose this
option if you do not have a DHCP server in your
network, or if you wish to assign a static IP address
to the DAP-2310. When Dynamic IP (DHCP) is
Please allow about two minutes for the DHCP client
to be functional once this selection is made.
The default IP address is 192.168.0.50. Assign a
static IP address that is within the IP address range
of your network.
Enter the subnet mask. All devices in the network
must share the same subnet mask.
Enter the IP address of the gateway in your network.
If there is a gateway in your network, please enter
an IP address within the range of your network.
LAN
Get IP
From:
IP
Address:
Subnet
Mask:
Default
Gateway:
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN
if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.
28D-Link DAP-2310 User Manual
Advanced Settings
Performance
Wireless:
Wireless Mode:
Data Rate*:
Use the drop-down menu to turn the wireless
function On or Off.
The different combination of clients that can
be supported include Mixed 802.11n, 802.11g
and 802.11b, Mixed 802.11g and 802.11b
and 802.11n Only. Please note that when
backwards compatibility is enabled for legacy
wireless performance is expected.
Indicate the base transfer rate of wireless
adapters on the wireless LAN. The AP will
adjust the base transfer rate depending on
the base rate of the connected device. If there
are obstacles or interference, the AP will step
down the rate. This option is enabled in Mixed
802.11g and 802.11b mode. The choices
available are Best (Up to 54), 54, 48, 36, 24,
18, 12, 9, 6, 11, 5.5, 2 or 1.
29D-Link DAP-2310 User Manual
100) is recommended. Setting a higher beacon interval can help to save the power of wireless clients, while
setting a lower one can help a wireless client connect to an access point faster.
1 and 15. The default value is 1. DTIM is a countdown in-
forming clients of the next window for listening to broadcast and multicast messages.
This setting determines the power level of the wireless transmission. Transmitting power can be adjusted to eliminate
overlapping of wireless area coverage between two access points where interference is a major concern. For example,
if wireless coverage is intended for half of the area, then select 50% as the option. Use the drop-down menu to select
100%, 50%, 25%, or 12.5%.
WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio and video applica-
tions over a Wi-Fi network.
64 to 200
Select Enable or Disable. Enabling a short guard interval can increase throughput. However, be aware that it can also
increase the error rate in some installations due to increased sensitivity to radio-frequency installations.
Select Enable or Disable
Select Enable or Disable. This is an option for load balancing. This determines whether to limit the number of users
exceeds this value, the DAP-2310 will not allow clients to associate with the AP.
0-64 users). To use this feature, the Connection Limit
above must be enabled. For most users, a limit of 10 is recommended. The default setting is 20.
The choices available are 130,117,78,65,58.5,54, 52,48, 39,36, 26,24, 19.5,18,
13,12, 9, 6.5,6, 11, 5.5, 2 or 1.
Beacon Interval
(25-500):
DTM Interval
(1-15):
Transmit Power:
WMM (Wi-Fi
Multimedia):
Ack Time Out
(2.4 GHZ, 64~200) :
Short GI:
IGMP Snooping:
Connection Limit:
User Limit (0-64):
Multicast Rate for
2.4G Band
30D-Link DAP-2310 User Manual
Basic > Wireless section, you can set the Primary
SSID. The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless
network or to establish a new wireless network.
Check to enable support for multiple SSIDs.
This read-only value is the current band
setting.
the Primary SSID, you have a total of four
multi-SSIDs.
setting is dlink. The SSID can be easily
changed to connect to an existing wireless
network or to establish a new wireless
network.
Enable or Disable SSID visibility. Enabling
this feature broadcasts the SSID across the
network, thus making it visible to all network
users.
The Multi-SSID security can be Open System, WPA-Personal, WPA-Enterprise, or 802.1x. For a detailed description
of the Open System parameters, please go to page 25. For a detailed description of the WPA-Personal parameters,
please go to page 26. For a detailed description of the WPA-Enterprise parameters, please go to page 27. For a detailed
description of the O802.1x parameters, please go to page 28.
Enable
Multi-SSID:
Band:
Index:
SSID:
SSID Visibility:
Security:
Multi-SSID
31D-Link DAP-2310 User Manual
Check the Enable Priority box at the top of this window to enable. Select the priority from the drop-down menu.
Select Enable or Disable.
When you select Open System, toggle between Enable and Disable. If Enable
Select HEX or ASCII.
Select 64 Bits or 128 Bits.
Select from the 1st to 4th key to be set as the active key.
Input up to four keys
When you select either WPA-Personal or WPA-Enterprise
AUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2)
Select Auto, AES, or TKIP from the drop-down menu.
Select the interval during which the group key will be valid. The default value of 1800 seconds is recommended.
When you select WPA-Personal, please enter a PassPhrase
When you select WPA-Personal, please re-enter the PassPhrase entered in the previous item
When you select WPA-Enterprise
Port and RADIUS Secret.
Enter the RADIUS port.
Enter the RADIUS secret.
Priority:
WMM (Wi-Fi
Multimedia):
Encryption:
Key Type:
Key Size:
Key Index (1-4):
Key:
WPA Mode:
Cipher Type:
Group Key Update
Interval:
PassPhrase:
Confirm
PassPhrase:
RADIUS Server:
RADIUS Port:
RADIUS Secret:
32D-Link DAP-2310 User Manual
VLAN
VLAN List
Multiple SSID, and WDS connection can be assigned to VLANs as they are physical ports. Any packet which enters the
DAP-2310 without a VLAN tag will have a VLAN tag inserted with a PVID.
The VLAN List tab displays the current VLANs.
Use the radio button to toggle between
Enable or Disable. Next, go to the Add/Edit
VLAN tab to add or modify an item on the
VLAN List tab.
VLAN Status:
33D-Link DAP-2310 User Manual
Port List
on the switch for handling VLAN tagged packets as described in the IEEE 802.1Q standard.
Use the radio button to toggle to Enable. Next,
go to the Add/Edit VLAN tab to add or modify
an item on the VLAN List tab.
The name of the port is displayed in this
column.
The Tagged VID is displayed in this column.
The Untagged VID is displayed in this column.
column.
VLAN Status:
Port Name:
Tag VID:
Untag VID:
PVID:
34D-Link DAP-2310 User Manual
Add/Edit VLAN
The Add/Edit VLANSave button
to let your changes take effect.
Use the radio button to toggle to Enable.
Provide a number between 1 and 4094 for
the Internal VLAN.
Enter the VLAN to add or modify.
VLAN Status:
VLAN ID:
VLAN Name:
35D-Link DAP-2310 User Manual
PVID Setting
The PVID Setting
various types of PVID settings. Click the Save button to let your changes take effect.
Use the radio button to toggle between
Enable and Disable.
Use the radio button to toggle PVID auto
assign status to Enable.
VLAN Status:
PVID Auto Assign
Status:
36D-Link DAP-2310 User Manual
Intrusion
The Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click
the Save button to let your changes take effect.
The choices include All, Valid, Neighbor,
Rogue, and New.
Click this button to initiate a scan of the
network.
AP List:
Detect:
37D-Link DAP-2310 User Manual
Schedule
The Wireless Schedule Settings window is used to add and modify scheduling rules on the device. Click the Save
button to let your changes take effect.
Use the drop-down menu to enable the
device’s scheduling feature.
Enter a name for the new scheduling rule in
Select the index from the drop-down menu.
Enter the name of your wireless network
Toggle the radio button between All Week
and Select Day(s). If the second option is
the rule to be effective on.
Check this box to have your settings apply
24 hours a day.
Enter the start time for your rule. If you
selected All Day, this option will be greyed
out.
Enter the end time for your rule.
Click to add the rule to the list.
This section will display the list of created
schedules.
Click the Save button to save your created rules.
Wireless
Schedule:
Name:
Index:
SSID:
Day(s):
All Day(s):
Start Time:
End Time:
Add:
Schedule Rule
List:
Save:
38D-Link DAP-2310 User Manual
QoS
Enable this option if you want to allow QoS to
transfers for many common audio and video
Such streams are frequently used by digital
media players.
When enabled, this option causes the access
based on the behavior that the streams exhibit.
bulk transfer characteristics, such as file
as gaming or VoIP, running at a normal priority.
QoS (Quality of
Service):
HTTP:
Automatic:
39D-Link DAP-2310 User Manual
Background (BK), Best Effort (BE), Video (VI), or Voice (VO).
Any, TCP, UDP, Both, IMCP, or Other.
to TCP, UDP, or Both.
when the Protocol is set
to TCP, UDP, or Both.
Name:
Priority:
Protocol:
Host 1 IP Range:
Host 1 Port
Range:
Host 2 IP Range:
Host 2 Port
Range:
40D-Link DAP-2310 User Manual
AP Array
This check box allows the user to enable the AP array
function. The three modes that are available are Master,
Backup Master, and Slave. APs in the same array will
the Master AP to the Slave AP and the Backup Master
AP when a Slave AP and a Backup Master AP join the
AP array.
Enter a name for the AP array you have created.
Enter a password that will be used to access the AP
array you have created.
Click this button to initiate a scan of all the available
APs currently on the network.
This table displays the current AP array status for the
Master, Backup Master, Slave, and Total.
This table displays all the current array members. The
DAP-2310 AP array feature supports up to eight AP
array members.
Enable Array:
AP Array Name:
AP Array
Password:
Scan AP Array
List:
AP Array List:
Current Array
Members:
41D-Link DAP-2310 User Manual
Select this option to enable SSID Visibility.
Select this option to use Auto Channel Selection.
Select this option to specify the Channel Width.
Select this option to use Wireless Security.
Select this option to specify the Data Rate.
Select this option to specify the Beacon Interval.
Select this option to specify the DTIM Interval.
Select this option to specify the Transmit Power.
Select this option to use WMM.
Select this option to use Ack Time Out.
Select this option to use Link Integrity.
Select this option to use a Connection Limit.
Select this option to use Wireless ACL.
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel Width:
Security:
Data Rate:
Beacon Interval:
DTIM Interval:
Transmit Power:
WMM (Wi-Fi
Multimedia):
Ack Time Out:
Short GI:
IGMP Snooping:
Link Integrity:
Connection Limit:
Wireless ACL:
Wireless Basic Settings
Wireless Advanced Settings
42D-Link DAP-2310 User Manual
Select this option to use an SSID.
Select this option to make the SSID Visible.
Select this option to use Wireless Security.
Select this option to use WMM.
Select this option to use VLAN.
SSID:
SSID Visibility:
Security:
WMM:
VLAN:
Multiple SSID & VLAN
Select this option to use Scheduled Settings.
Select this option to use Quality of Service.
Select this option to use DHCP.
Select this option to enable the Log Settings.
Select this option to use the Time and Date Settings.
Schedule Settings:
QoS Settings:
DHCP Server Settings:
Log Settings:
Time and Date Settings:
Advanced Functions
Select this option to enable SNMP Settings.
Select this option to use a System Name.
Select this option to use Login Settings.
Select this option to enable Console Settings.
SNMP Settings:
System Name Settings:
Login Settings:
Console Settings:
Administration Settings
43D-Link DAP-2310 User Manual
This check box allows you to enable
the ARP spoofing prevention
function.
Enter a gateway IP address.
Enter a gateway MAC address.
ARP Spoofing Prevention:
Gateway IP Address:
Gateway MAC Address:
44D-Link DAP-2310 User Manual
DHCP Server
Dynamic Pool Settings
Pool allows wireless stations to receive an available IP with lease time control. If needed or required in the network,
the DAP-2310 is capable of acting as a DHCP server.
assigns dynamic IP addresses to devices on
management and allows new wireless devices
to receive IP addresses automatically without
the need to manually assign new IP addresses.
Select Enable to allow the DAP-2310 to function
as a DHCP server.
on your network.
Enter the number of IP addresses available for
assignment. IP addresses are increments of the
All devices in the network must have the
same subnet mask to communicate. Enter the
submask for the network here.
Enter the IP address of the gateway on the
network.
determines the IP address of a network computer that has a dynamically assigned IP address.
Function Enable/
Disable:
IP Assigned
From:
The Range of
Pool (1-254):
Subnet Mask:
Gateway:
WINS:
45D-Link DAP-2310 User Manual
www.dlink.com into IP addresses.
The lease time is the period of time before the DHCP server will assign new IP addresses.
DNS:
Domain Name:
Lease Time
(60-31536000 sec):
46D-Link DAP-2310 User Manual
Static Pool Setting
Dynamic Host Configuration Protocol
devices on the network. This protocol
new wireless devices to receive IP addresses
automatically without the need to manually
assign IP addresses. Select Enable to allow
the DAP-2310 to function as a DHCP server.
Use the Static Pool Settings to assign the
same IP address to a device every time you
start up. The IP addresses assigned in the
Static Pool list must NOT be in the same IP
range as the Dynamic Pool. After you have
assigned a static IP address to a device via
its MAC address, click Save; the device will
appear in the Assigned Static Pool at the
the device in this list.
Enter the MAC address of the device
requesting association here.
Function Enable/
Disable:
Assigned IP:
Assigned MAC
Address:
Subnet Mask:
47D-Link DAP-2310 User Manual
Specify the Windows Internet Naming ServiceINS is a system that
determines the IP address of a network computer with a dynamically assigned IP address, if applicable.
such as www.dlink.com into IP addresses.
Specify the domain name for the network.
Gateway:
WINS:
DNS:
Domain Name:
48D-Link DAP-2310 User Manual
Current IP Mapping List
This window displays information about the current assigned DHCP dynamic and static IP address pools. This information
is available when you enable DHCP server on the AP and assign dynamic and static IP address pools.
These are IP address pools the DHCP server
has assigned using the dynamic pool setting.
The host name of a device on the network
that is assigned an IP address from the DHCP
dynamic pool.
The MAC address of a device on the network
that is assigned an IP address from the DHCP
dynamic pool.
The current corresponding DHCP-assigned IP
address of the device.
The length of time that the dynamic IP address
will be valid.
These are the IP address pools of the DHCP
server assigned through the static pool
settings.
The host name of a device on the network that
is assigned an IP address from the DHCP dynamic pool.
The MAC address of a device on the network that is within the DHCP static IP address pool.
The current corresponding DHCP-assigned static IP address of the device.
Current DHCP
Dynamic Profile:
Host Name:
Binding MAC
Address:
Assigned IP
Address:
Lease Time:
Current DHCP
Static Pools:
Host Name:
Binding MAC
Address:
Assigned IP
Address:
49D-Link DAP-2310 User Manual
Filters
Wireless MAC ACL
Displays the current wireless band rate.
Select Disable
Select Accept to accept only those devices
with MAC addresses in the Access Control
List. All other devices not on the list will be
rejected.
Select Reject to reject the devices with MAC
addresses on the Access Control List. All
other devices not on the list will be accepted.
Enter each MAC address that you wish to
Add.
When you enter a MAC address, it appears
in this list. Highlight a MAC address and click
Delete to remove it from this list.
the access point instead of manually entering
the information. Once created, click the
Browse
and then click Upload.
Click Download
on your computer.
Wireless Band:
Access Control
List:
MAC Address:
MAC Address List:
Upload ACL File:
Download ACL
File:
50D-Link DAP-2310 User Manual
WLAN Partition
Displays the current wireless band rate.
Select Enable or Disable.
The default is Enable. When disabled, all
data from the Ethernet to associated wireless
devices will be blocked. Wireless devices can
still send data to the Ethernet.
The default value is Enable, which allows
stations to inter-communicate by connecting
to a target AP. When disabled, wireless
stations cannot exchange data through the
AP.
Wireless Band:
Link Integrity:
Ethernet to
WLAN Access:
Internal Station
Connection:
51D-Link DAP-2310 User Manual
Status
Device Information
version and the device's MAC address.
Device
Information:
52D-Link DAP-2310 User Manual
The following information is available for each
client communicating with the DAP-2310.
Client Information
This window displays the wireless client
information for clients currently connected
to the DAP-2310.
Client Information:
Displays the SSID of the client.
Displays the MAC address of the client.
Displays the wireless band that the client
is connected to.
Displays the type of authentication being
used.
Displays the client's signal strength.
Displays the status of the power saving
feature.
SSID:
MAC:
Band:
Authentication:
Signal:
Power Saving
Mode:
53D-Link DAP-2310 User Manual
WDS Information
The following information is available for each
client communicating with the DAP-2310.
This window displays the Wireless
Distribution System information for clients
currently connected to the DAP-2310.
WDS
Information:
Displays the SSID of the client.
Displays the MAC address of the client.
Displays the type of authentication being
used.
Displays the client's signal strength.
Displays the status of the power saving
feature.
Name:
MAC:
Authentication:
Signal:
Status:
54D-Link DAP-2310 User Manual
Stats
Ethernet
This page displays transmitted and received
count statistics for packets and bytes.
Ethernet Traffic
Statistics:
55D-Link DAP-2310 User Manual
This page displays wireless network statistics
for data throughput, transmitted and received
frames, and frame errors.
WLAN Traffic
Statistics:
56D-Link DAP-2310 User Manual
Log
View Log
The AP’s embedded memory displays
system and network messages including
a time stamp and message type. The log
information includes but is not limited to the
with AP, and web login. The web page holds
up to 500 logs.
View Log:
57D-Link DAP-2310 User Manual
Log Settings
Enter the IP address of the server you would
like to send the DAP-2310 log to.
Check the box for the type of activity you
Activity, Wireless Activity, and Notice.
Select the SMTP server from the drop-down
menu.
Check to enable authentication.
Check to enable SSL/TLS authentication.
Enter the destination email address.
Enter the Email Server Address.
Enter the SMTP port.
Enter your email username.
Enter your email password.
Enter your email password again.
Select when to send the log to your email
the log is full too.
Log Server/IP
Address:
Log Type:
Email Notification:
Outgoing Mail
Server (SMTP):
Authentication:
SSL / TLS:
From Email
Address:
To Email Address:
Email Server
Address:
SMTP Port:
Username:
Password:
Confirm Password:
Schedule:
58D-Link DAP-2310 User Manual
Maintenance
Administration Settings
59D-Link DAP-2310 User Manual
Limit Administrator
Check the box provided and the enter the
be allowed to log in from.
Check to enable the Limit Administrator IP
address.
Enter the IP address range that the
administrator will be allowed to log in from
and then click the Add button.
Limit
Administrator
VLAN ID:
Limit
Administrator IP:
IP Range:
60D-Link DAP-2310 User Manual
System Name Settings
The name of the device. The default name is
D-Link DAP-2310.
The physical location of the device, e.g. 72nd
Floor, D-Link HQ.
System Name:
Location:
61D-Link DAP-2310 User Manual
Login Settings
Enter a user name. The default is admin.
When changing your password, enter the old
password here.
When changing your password, enter the new
password here. The password is case-sensitive.
should be between 0 and 12 characters.
Enter the new password a second time for
Login Name:
Old Password:
New Password:
Confirm
Password:
62D-Link DAP-2310 User Manual
Console Settings
Status is enabled by default. Uncheck the box
to disable the console.
Select the type of protocol you would like to
use, Telnet or SSH.
Set to 1 Min, 3 Mins, 5 Mins, 10 Mins, 15
Mins or Never.
Status:
Console
Protocol:
Timeout:
63D-Link DAP-2310 User Manual
SNMP Settings
Check the box to enable the SNMP
functions. This option is disabled
by default.
Enter the public SNMP community
string.
Enter the private SNMP community
string.
Check the box to enable Trap
Status.
Enter the Trap Server IP address.
Status:
Public Community String:
Private Community String:
Trap Status:
Trap Server IP:
64D-Link DAP-2310 User Manual
The current firmware version is displayed
your local computer, use the Browse button to
Upload
don’t turn the power off while upgrading.
utility in another language. Click Browse to
computer. After selecting and opening the
file, click Upload to upload the file to the
DAP-2310.
Click Browse
Upload
to the DAP-2310.
Upload Firmware
From Local Hard
Drive:
Language Pack
Upgrade:
Upload SSL
Certification
From Local Hard
Drive:
software used by the access point. This is a useful feature that prevents future bugs and allows for new features to
65D-Link DAP-2310 User Manual
Click the Browse button to locate a previously
Upload to apply
Click Download to save the current
the administrator’s password now, after
resetting your DAP-2310, and then updating
will be gone.
Upload File:
Download
Configuration
File:
66D-Link DAP-2310 User Manual
Time and Date
Displays the current time and date settings.
Use the drop-down menu to select your
correct Time Zone.
Check the box to Enable Daylight Saving
Time.
Use the drop-down menu to select the correct
Daylight Saving offset.
Check to enable the AP to get system time
from an NTP server.
Enter the NTP server IP address.
AP here, or you can click the Copy Your
Computer’s Time Settings button to copy
the time from the computer you are using
correctly).
Current Time:
Time Zone:
Enable Daylight
Saving:
Daylight Saving
Dates:
Enable NTP
Server:
NTP Server:
Set the Date and
Time Manually:
67D-Link DAP-2310 User Manual
System
System Settings
Click Restart to restart the DAP-2310.
Click Restore to restore the DAP-2310
back to factory default settings.
Click Clear to remove any loaded
language packs.
Restart the Device:
Restore to Factory
Default Settings:
Clear Language Pack:
68D-Link DAP-2310 User Manual
Help
Scroll down the Help page for topics and
explanations.
Help:
69D-Link DAP-2310 User Manual
Section 6 - Troubleshooting
Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of the DAP-2310.
®
you have a different operating system, the screenshots on your computer will look similar to the following examples.)
website on the Internet nor do you have to be connected to the Internet. The device has the utility built-in to a ROM
- Microsoft Internet Explorer® 6.0 and higher
™ Chrome 2.0 and higher
- Apple Safari 3.0 and higher
a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may
not be on.
Sygate, Norton Personal Firewall, and Windows®
70D-Link DAP-2310 User Manual
Section 6 - Troubleshooting
Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab,
click the button to restore the settings to their defaults.
Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings
button. Make sure nothing is checked. Click OK.
Advanced tab and click the button to restore these settings to their defaults. Click OK three
times.
address bar. This should open the login page for your the web management.
different computer.
If you forgot your password, you must reset your access point. Unfortunately, this process will change all your settings
back to the factory defaults.
on, use a paperclip to hold the button down for 10 seconds. Release the button and the access point will go through
its reboot process. Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When
logging in, the username is admin and leave the password box empty.
71D-Link DAP-2310 User Manual
Appendix B - Networking Basics
Networking Basics
Check your IP address
After you install your network adapter, by default, the TCP/IP settings should be set to obtain an IP address from a
Click on Start > Run. In the run box type cmd and click OK.
At the prompt, type EL?KJłC and press Enter.
This will display the IP address, subnet mask, and
the default gateway of your adapter.
If the address is 0.0.0.0, check your adapter
installation, security settings, and the settings on
block a DHCP request on newly installed adapters.
If you are connecting to a wireless network at a
contact an employee or administrator to verify their
wireless network settings.
72D-Link DAP-2310 User Manual
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps
Step 1
Windows®Start > Settings > Control Panel > Network Connections
Windows®Start > Control Panel > Network Connections
Windows Vista®Start > Control Panel > Network and Internet > Network and Sharing Center > Manage
network connections
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the
LAN IP address on your router.
Example:
73D-Link DAP-2310 User Manual
Appendix B - Networking Basics
Set Primary DNS the same as the LAN IP address of your router
enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void the
user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator & your body.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
㻵㼚㼐㼡㼟㼠㼞㼥㻌㻯㼍㼚㼍㼐㼍㻌㼟㼠㼍㼠㼑㼙㼑㼚㼠㻦㻌
㼀㼔㼕㼟㻌㼐㼑㼢㼕㼏㼑㻌㼏㼛㼙㼜㼘㼕㼑㼟㻌㼣㼕㼠㼔㻌㻾㻿㻿㻙㻞㻝㻜㻌㼛㼒㻌㼠㼔㼑㻌㻵㼚㼐㼡㼟㼠㼞㼥㻌㻯㼍㼚㼍㼐㼍㻌㻾㼡㼘㼑㼟㻚㻌㻻㼜㼑㼞㼍㼠㼕㼛㼚㻌㼕㼟㻌㼟㼡㼎㼖㼑㼏㼠㻌㼠㼛㻌㼠㼔㼑㻌
㼒㼛㼘㼘㼛㼣㼕㼚㼓㻌㼠㼣㼛㻌㼏㼛㼚㼐㼕㼠㼕㼛㼚㼟㻦㻌㻔㻝㻕㻌㼀㼔㼕㼟㻌㼐㼑㼢㼕㼏㼑㻌㼙㼍㼥㻌㼚㼛㼠㻌㼏㼍㼡㼟㼑㻌㼔㼍㼞㼙㼒㼡㼘㻌㼕㼚㼠㼑㼞㼒㼑㼞㼑㼚㼏㼑㻘㻌㼍㼚㼐㻌㻔㻞㻕㻌㼠㼔㼕㼟㻌㼐㼑㼢㼕㼏㼑㻌
㼙㼡㼟㼠㻌㼍㼏㼏㼑㼜㼠㻌㼍㼚㼥㻌㼕㼚㼠㼑㼞㼒㼑㼞㼑㼚㼏㼑㻌㼞㼑㼏㼑㼕㼢㼑㼐㻘㻌㼕㼚㼏㼘㼡㼐㼕㼚㼓㻌㼕㼚㼠㼑㼞㼒㼑㼞㼑㼚㼏㼑㻌㼠㼔㼍㼠㻌㼙㼍㼥㻌㼏㼍㼡㼟㼑㻌㼡㼚㼐㼑㼟㼕㼞㼑㼐㻌㼛㼜㼑㼞㼍㼠㼕㼛㼚㻚㻌
㻯㼑㻌㼐㼕㼟㼜㼛㼟㼕㼠㼕㼒㻌㼑㼟㼠㻌㼏㼛㼚㼒㼛㼞㼙㼑㻌㽫㻌㼘㼍㻌㼚㼛㼞㼙㼑㻌㻯㻺㻾㻙㻞㻝㻜㻌㼐㻓㻵㼚㼐㼡㼟㼠㼞㼕㼑㻌㻯㼍㼚㼍㼐㼍㻌㼍㼜㼜㼘㼕㼏㼍㼎㼘㼑㻌㼍㼡㼤㻌㼍㼜㼜㼍㼞㼑㼕㼘㼟㻌㼞㼍㼐㼕㼛㻌
㼑㼤㼑㼙㼜㼠㼟㻌㼐㼑㻌㼘㼕㼏㼑㼚㼏㼑㻚㻌㻿㼛㼚㻌㼒㼛㼚㼏㼠㼕㼛㼚㼚㼑㼙㼑㼚㼠㻌㼑㼟㼠㻌㼟㼡㼖㼑㼠㻌㼍㼡㼤㻌㼐㼑㼡㼤㻌㼏㼛㼚㼐㼕㼠㼕㼛㼚㼟㻌㼟㼡㼕㼢㼍㼚㼠㼑㼟㻦㻌㻔㻝㻕㻌㼘㼑㻌㼐㼕㼟㼜㼛㼟㼕㼠㼕㼒㻌㼚㼑㻌
㼐㼛㼕㼠㻌㼜㼍㼟㻌㼜㼞㼛㼐㼡㼕㼞㼑㻌㼐㼑㻌㼎㼞㼛㼡㼕㼘㼘㼍㼓㼑㻌㼜㼞㽴㼖㼡㼐㼕㼏㼕㼍㼎㼘㼑㻘㻌㼑㼠㻌㻔㻞㻕㻌㼏㼑㻌㼐㼕㼟㼜㼛㼟㼕㼠㼕㼒㻌㼐㼛㼕㼠㻌㼍㼏㼏㼑㼜㼠㼑㼞㻌㼠㼛㼡㼠㻌㼎㼞㼛㼡㼕㼘㼘㼍㼓㼑㻌㼞㼑㽲㼡㻘㻌㼥㻌
㼏㼛㼙㼜㼞㼕㼟㻌㼡㼚㻌㼎㼞㼛㼡㼕㼘㼘㼍㼓㼑㻌㼟㼡㼟㼏㼑㼜㼠㼕㼎㼘㼑㻌㼐㼑㻌㼜㼞㼛㼢㼛㼝㼡㼑㼞㻌㼡㼚㻌㼒㼛㼚㼏㼠㼕㼛㼚㼚㼑㼙㼑㼚㼠㻌㼕㼚㼐㽴㼟㼕㼞㼍㼎㼘㼑㻚㻌 㻌
㻌
㻵㻹㻼㻻㻾㼀㻭㻺㼀㻌㻺㻻㼀㻱㻦㻌㻾㼍㼐㼕㼍㼠㼕㼛㼚㻌㻱㼤㼜㼛㼟㼡㼞㼑㻌㻿㼠㼍㼠㼑㼙㼑㼚㼠㻦㻌
㼀㼔㼕㼟㻌㼑㼝㼡㼕㼜㼙㼑㼚㼠㻌㼏㼛㼙㼜㼘㼕㼑㼟㻌㼣㼕㼠㼔㻌㻵㻯㻌㼞㼍㼐㼕㼍㼠㼕㼛㼚㻌㼑㼤㼜㼛㼟㼡㼞㼑㻌㼘㼕㼙㼕㼠㼟㻌㼟㼑㼠㻌㼒㼛㼞㼠㼔㻌㼒㼛㼞㻌㼍㼚㻌㼡㼚㼏㼛㼚㼠㼞㼛㼘㼘㼑㼐㻌㼑㼚㼢㼕㼞㼛㼚㼙㼑㼚㼠㻚㻌
㼀㼔㼕㼟㻌㼑㼝㼡㼕㼜㼙㼑㼚㼠㻌㼟㼔㼛㼡㼘㼐㻌㼎㼑㻌㼕㼚㼟㼠㼍㼘㼘㼑㼐㻌㼍㼚㼐㻌㼛㼜㼑㼞㼍㼠㼑㼐㻌㼣㼕㼠㼔㻌㼙㼕㼚㼕㼙㼡㼙㻌㼐㼕㼟㼠㼍㼚㼏㼑㻌㻞㻜㼏㼙㻌㼎㼑㼠㼣㼑㼑㼚㻌㼠㼔㼑㻌㼞㼍㼐㼕㼍㼠㼛㼞㻌
㻒㻌㼥㼛㼡㼞㻌㼎㼛㼐㼥㻚㻌
㻺㻻㼀㻱㻌㻵㻹㻼㻻㻾㼀㻭㻺㼀㻱㻦㻌 㻌
㻰㽴㼏㼘㼍㼞㼍㼠㼕㼛㼚㻌㼐㻓㼑㼤㼜㼛㼟㼕㼠㼕㼛㼚㻌㼍㼡㼤㻌㼞㼍㼐㼕㼍㼠㼕㼛㼚㼟㻦㻌
㻯㼑㼠㻌㽴㼝㼡㼕㼜㼑㼙㼑㼚㼠㻌㼑㼟㼠㻌㼏㼛㼚㼒㼛㼞㼙㼑㻌㼍㼡㼤㻌㼘㼕㼙㼕㼠㼑㼟㻌㼐㻓㼑㼤㼜㼛㼟㼕㼠㼕㼛㼚㻌㼍㼡㼤㻌㼞㼍㼥㼛㼚㼚㼑㼙㼑㼚㼠㼟㻌㻵㻯㻌㽴㼠㼍㼎㼘㼕㼑㼟㻌㼜㼛㼡㼞㻌㼡㼚㻌
㼑㼚㼢㼕㼞㼛㼚㼚㼑㼙㼑㼚㼠㻌㼚㼛㼚㻌㼏㼛㼚㼠㼞㽿㼘㽴㻚㻌㻯㼑㼠㻌㽴㼝㼡㼕㼜㼑㼙㼑㼚㼠㻌㼐㼛㼕㼠㻌㽵㼠㼞㼑㻌㼕㼚㼟㼠㼍㼘㼘㽴㻌㼑㼠㻌㼡㼠㼕㼘㼕㼟㽴㻌㼍㼢㼑㼏㻌㼡㼚㻌㼙㼕㼚㼕㼙㼡㼙㻌㼐㼑㻌㻞㻜㻌㼏㼙㻌
㼐㼑㻌㼐㼕㼟㼠㼍㼚㼏㼑㻌㼑㼚㼠㼞㼑㻌㼘㼍㻌㼟㼛㼡㼞㼏㼑㻌㼐㼑㻌㼞㼍㼥㼛㼚㼚㼑㼙㼑㼚㼠㻌㼑㼠㻌㼢㼛㼠㼞㼑㻌㼏㼛㼞㼜㼟㻚㻌
㻌
㼀㼔㼕㼟㻌 㼐㼑㼢㼕㼏㼑㻌 㼔㼍㼟㻌 㼎㼑㼑㼚㻌 㼐㼑㼟㼕㼓㼚㼑㼐㻌 㼠㼛㻌 㼛㼜㼑㼞㼍㼠㼑㻌 㼣㼕㼠㼔㻌 㼍㼚㻌 㼍㼚㼠㼑㼚㼚㼍㻌 㼔㼍㼢㼕㼚㼓㻌㼍㻌㼙㼍㼤㼕㼙㼡㼙㻌㼓㼍㼕㼚㻌㼛㼒㻌㼇㻞㼉㻌㼐㻮㻚㻌
㻭㼚㼠㼑㼚㼚㼍㻌㼔㼍㼢㼕㼚㼓㻌㼍㻌㼔㼕㼓㼔㼑㼞㻌㼓㼍㼕㼚㻌㼕㼟㻌㼟㼠㼞㼕㼏㼠㼘㼥㻌㼜㼞㼛㼔㼕㼎㼕㼠㼑㼐㻌㼜㼑㼞㻌㼞㼑㼓㼡㼘㼍㼠㼕㼛㼚㼟㻌㼛㼒㻌㻵㼚㼐㼡㼟㼠㼞㼥㻌㻯㼍㼚㼍㼐㼍㻚㻌㼀㼔㼑㻌㼞㼑㼝㼡㼕㼞㼑㼐㻌
㼍㼚㼠㼑㼚㼚㼍㻌㼕㼙㼜㼑㼐㼍㼚㼏㼑㻌㼕㼟㻌㻡㻜㻌㼛㼔㼙㼟㻚㻌
㼁㼚㼐㼑㼞㻌㻵㼚㼐㼡㼟㼠㼞㼥㻌㻯㼍㼚㼍㼐㼍㻌㼞㼑㼓㼡㼘㼍㼠㼕㼛㼚㼟㻘㻌㼠㼔㼕㼟㻌㼞㼍㼐㼕㼛㻌㼠㼞㼍㼚㼟㼙㼕㼠㼠㼑㼞㻌㼙㼍㼥㻌㼛㼚㼘㼥㻌㼛㼜㼑㼞㼍㼠㼑㻌㼡㼟㼕㼚㼓㻌㼍㼚㻌㼍㼚㼠㼑㼚㼚㼍㻌㼛㼒㻌㼍㻌
㼠㼥㼜㼑㻌㼍㼚㼐㻌㼙㼍㼤㼕㼙㼡㼙㻌㻔㼛㼞㻌㼘㼑㼟㼟㼑㼞㻕㻌㼓㼍㼕㼚㻌㼍㼜㼜㼞㼛㼢㼑㼐㻌㼒㼛㼞㻌㼠㼔㼑㻌㼠㼞㼍㼚㼟㼙㼕㼠㼠㼑㼞㻌㼎㼥 㻵㼚㼐㼡㼟㼠㼞㼥㻌㻯㼍㼚㼍㼐㼍㻚㻌㼀㼛㻌㼞㼑㼐㼡㼏㼑㻌
㼜㼛㼠㼑㼚㼠㼕㼍㼘㻌㼞㼍㼐㼕㼛㻌㼕㼚㼠㼑㼞㼒㼑㼞㼑㼚㼏㼑㻌㼠㼛㻌㼛㼠㼔㼑㼞㻌㼡㼟㼑㼞㼟㻘㻌㼠㼔㼑㻌㼍㼚㼠㼑㼚㼚㼍㻌㼠㼥㼜㼑㻌㼍㼚㼐㻌㼕㼠㼟㻌㼓㼍㼕㼚㻌㼟㼔㼛㼡㼘㼐㻌㼎㼑㻌㼟㼛㻌㼏㼔㼛㼟㼑㼚㻌㼠㼔㼍㼠㻌
㼠㼔㼑㻌㼑㼝㼡㼕㼢㼍㼘㼑㼚㼠㻌㼕㼟㼛㼠㼞㼛㼜㼕㼏㼍㼘㼘㼥㻌㼞㼍㼐㼕㼍㼠㼑㼐㻌㼜㼛㼣㼑㼞㻌㻔㼑㻚㼕㻚㼞㻚㼜㻚㻕㻌㼕㼟㻌㼚㼛㼠㻌㼙㼛㼞㼑㻌㼠㼔㼍㼚㻌㼠㼔㼍㼠㻌㼚㼑㼏㼑㼟㼟㼍㼞㼥㻌㼒㼛㼞㻌㼟㼡㼏㼏㼑㼟㼟㼒㼡㼘㻌
㼏㼛㼙㼙㼡㼚㼕㼏㼍㼠㼕㼛㼚㻚㻌
㼀㼔㼕㼟㻌㼞㼍㼐㼕㼛㻌㼠㼞㼍㼚㼟㼙㼕㼠㼠㼑㼞㻌㻔㻵㻯㻦㻌㻠㻞㻝㻢㻭㻙㼃㻭㻡㻞㻡㻭㻞㻛㻌㻹㼛㼐㼑㼘㻦 㻰㼃㻭㻙㻡㻞㻡㻭㻞㻕㻌㼔㼍㼟㻌㼎㼑㼑㼚㻌㼍㼜㼜㼞㼛㼢㼑㼐㻌㼎㼥㻌㻵㼚㼐㼡㼟㼠㼞㼥㻌
㻯㼍㼚㼍㼐㼍㻌㼠㼛㻌㼛㼜㼑㼞㼍㼠㼑㻌㼣㼕㼠㼔㻌㼠㼔㼑㻌㼍㼚㼠㼑㼚㼚㼍㻌㼠㼥㼜㼑㼟㻌㼘㼕㼟㼠㼑㼐㻌㼎㼑㼘㼛㼣㻌㼣㼕㼠㼔㻌㼠㼔㼑㻌㼙㼍㼤㼕㼙㼡㼙㻌㼜㼑㼞㼙㼕㼟㼟㼕㼎㼘㼑㻌㼓㼍㼕㼚㻌㼍㼚㼐㻌
㼞㼑㼝㼡㼕㼞㼑㼐㻌㼍㼚㼠㼑㼚㼚㼍㻌㼕㼙㼜㼑㼐㼍㼚㼏㼑㻌㼒㼛㼞㻌㼑㼍㼏㼔㻌㼍㼚㼠㼑㼚㼚㼍㻌㼠㼥㼜㼑㻌㼕㼚㼐㼕㼏㼍㼠㼑㼐㻚㻌㻭㼚㼠㼑㼚㼚㼍㻌㼠㼥㼜㼑㼟㻌㼚㼛㼠㻌㼕㼚㼏㼘㼡㼐㼑㼐㻌㼕㼚㻌㼠㼔㼕㼟㻌㼘㼕㼟㼠㻘㻌
㼔㼍㼢㼕㼚㼓㻌㼍㻌㼓㼍㼕㼚㻌㼓㼞㼑㼍㼠㼑㼞㻌㼠㼔㼍㼚㻌㼠㼔㼑㻌㼙㼍㼤㼕㼙㼡㼙㻌㼓㼍㼕㼚㻌㼕㼚㼐㼕㼏㼍㼠㼑㼐㻌㼒㼛㼞㻌㼠㼔㼍㼠㻌㼠㼥㼜㼑㻘㻌㼍㼞㼑㻌㼟㼠㼞㼕㼏㼠㼘㼥㻌㼜㼞㼛㼔㼕㼎㼕㼠㼑㼐㻌㼒㼛㼞㻌㼡㼟㼑㻌
㼣㼕㼠㼔㻌㼠㼔㼕㼟㻌㼐㼑㼢㼕㼏㼑㻚㻌
㻯㼑㻌㼐㼕㼟㼜㼛㼟㼕㼠㼕㼒㻌㼍㻌㽴㼠㽴㻌㼏㼛㼚㽲㼡㻌㼜㼛㼡㼞㻌㼒㼛㼚㼏㼠㼕㼛㼚㼚㼑㼞㻌㼍㼢㼑㼏㻌㼡㼚㼑㻌㼍㼚㼠㼑㼚㼚㼑㻌㼍㼥㼍㼚㼠㻌㼡㼚㻌㼓㼍㼕㼚㻌㼙㼍㼤㼕㼙㼍㼘㻌㼐㼑㻌㼐㻮㻌㼇㻞㼉㻚㻌㼁㼚㼑㻌
㼍㼚㼠㼑㼚㼚㼑㻌㽫㻌㼓㼍㼕㼚㻌㼜㼘㼡㼟㻌㽴㼘㼑㼢㽴㻌㼑㼟㼠㻌㼟㼠㼞㼕㼏㼠㼑㼙㼑㼚㼠㻌㼕㼚㼠㼑㼞㼐㼕㼠㼑㻌㼜㼍㼞㻌㼘㼑㼟㻌㼞㽳㼓㼘㼑㼙㼑㼚㼠㼟㻌㼐㻓㻵㼚㼐㼡㼟㼠㼞㼕㼑㻌㻯㼍㼚㼍㼐㼍㻚㻌
㻸㻓㼕㼙㼜㽴㼐㼍㼚㼏㼑㻌㼐㻓㼍㼚㼠㼑㼚㼚㼑㻌㼞㼑㼝㼡㼕㼟㼑㻌㼑㼟㼠㻌㼐㼑㻌㻡㻜㻌㼛㼔㼙㼟㻚㻌
㻯㼛㼚㼒㼛㼞㼙㽴㼙㼑㼚㼠㻌 㽫㻌 㼘㼍㻌㼞㽴㼓㼘㼑㼙㼑㼚㼠㼍㼠㼕㼛㼚㻌㼐㻓㻵㼚㼐㼡㼟㼠㼞㼕㼑㻌㻯㼍㼚㼍㼐㼍㻘㻌㼘㼑㻌㼜㼞㽴㼟㼑㼚㼠㻌 㽴㼙㼑㼠㼠㼑㼡㼞㻌㼞㼍㼐㼕㼛㻌㼜㼑㼡㼠㼒㼛㼚㼏㼠㼕㼛㼚㼚㼑㼞㻌
㼍㼢㼑㼏㻌㼡㼚㼑㻌㼍㼚㼠㼑㼚㼚㼑㻌㼐㻓㼡㼚㻌㼠㼥㼜㼑㻌㼑㼠㻌㼐㻓㼡㼚㻌㼓㼍㼕㼚㻌㼙㼍㼤㼕㼙㼍㼘㻌㻔㼛㼡㻌㼕㼚㼒㽴㼞㼕㼑㼡㼞㻕㻌㼍㼜㼜㼞㼛㼡㼢㽴㻌㼜㼛㼡㼞㼘㻓㽴㼙㼑㼠㼠㼑㼡㼞㻌㼜㼍㼞㻌㻵㼚㼐㼡㼟㼠㼞㼕㼑㻌
(IC: 4216A-AP2310A1 / Model: DAP-2310A1)
㻯㼍㼚㼍㼐㼍㻚㻌 㻰㼍㼚㼟㻌 㼘㼑㻌 㼎㼡㼠㻌 㼐㼑㻌 㼞㽴㼐㼡㼕㼞㼑㻌 㼘㼑㼟㻌 㼞㼕㼟㼝㼡㼑㼟㻌 㼐㼑㻌 㼎㼞㼛㼡㼕㼘㼘㼍㼓㼑㻌 㼞㼍㼐㼕㼛㽴㼘㼑㼏㼠㼞㼕㼝㼡㼑㽫㻌 㼘㻓㼕㼚㼠㼑㼚㼠㼕㼛㼚㻌 㼐㼑㼟㻌 㼍㼡㼠㼞㼑㼟㻌
㼡㼠㼕㼘㼕㼟㼍㼠㼑㼡㼞㼟㻘㻌㼕㼘㻌㼒㼍㼡㼠㻌㼏㼔㼛㼕㼟㼕㼞㻌㼘㼑㻌㼠㼥㼜㼑㻌㼐㻓㼍㼚㼠㼑㼚㼚㼑㻌㼑㼠㻌㼟㼛㼚㻌㼓㼍㼕㼚㻌㼐㼑㻌㼟㼛㼞㼠㼑㻌㼝㼡㼑㻌㼘㼍㼜㼡㼕㼟㼟㼍㼚㼏㼑㻌㼕㼟㼛㼠㼞㼛㼜㼑㻌㼞㼍㼥㼛㼚㼚㽴㼑㻌
㽴㼝㼡㼕㼢㼍㼘㼑㼚㼠㼑㻌 㻔㼜㻚㼕㻚㼞㻚㼑㻚㻕㻌 㼚㼑㻌 㼐㽴㼜㼍㼟㼟㼑㻌 㼜㼍㼟㻌 㼘㻓㼕㼚㼠㼑㼚㼟㼕㼠㽴㻌 㼚㽴㼏㼑㼟㼟㼍㼕㼞㼑㻌 㽫㼘㻓㽴㼠㼍㼎㼘㼕㼟㼟㼑㼙㼑㼚㼠㻌 㼐㻓㼡㼚㼑㻌 㼏㼛㼙㼙㼡㼚㼕㼏㼍㼠㼕㼛㼚㻌
㼟㼍㼠㼕㼟㼒㼍㼕㼟㼍㼚㼠㼑㻚㻌
㻸㼑㻌 㼜㼞㽴㼟㼑㼚㼠㻌 㽴㼙㼑㼠㼠㼑㼡㼞㻌 㼞㼍㼐㼕㼛㻌 㻔㻵㻯㻦㻌 㻠㻞㻝㻢㻭㻙㼃㻭㻡㻞㻡㻭㻞㻛㻌 㻹㼛㼐㽳㼘㼑㻦㻌 㻰㼃㻭㻙㻡㻞㻡㻭㻞㻕㻌 㼍㻌 㽴㼠㽴㻌 㼍㼜㼜㼞㼛㼡㼢㽴㻌 㼜㼍㼞㻌
㻵㼚㼐㼡㼟㼠㼞㼕㼑㻌㻯㼍㼚㼍㼐㼍㻌㼜㼛㼡㼞㻌㼒㼛㼚㼏㼠㼕㼛㼚㼚㼑㼞㻌㼍㼢㼑㼏㻌㼘㼑㼟㻌㼠㼥㼜㼑㼟㻌㼐㻓㼍㼚㼠㼑㼚㼚㼑㻌㽴㼚㼡㼙㽴㼞㽴㼟㻌㼏㼕㻙㼐㼑㼟㼟㼛㼡㼟㻌㼑㼠㻌㼍㼥㼍㼚㼠㻌㼡㼚㻌㼓㼍㼕㼚㻌
㼍㼐㼙㼕㼟㼟㼕㼎㼘㼑㻌 㼙㼍㼤㼕㼙㼍㼘㻌 㼑㼠㻌 㼘㻓㼕㼙㼜㽴㼐㼍㼚㼏㼑㻌 㼞㼑㼝㼡㼕㼟㼑㻌 㼜㼛㼡㼞㻌 㼏㼔㼍㼝㼡㼑㻌 㼠㼥㼜㼑㻌 㼐㻓㼍㼚㼠㼑㼚㼚㼑㻚㻌 㻸㼑㼟㻌 㼠㼥㼜㼑㼟㻌 㼐㻓㼍㼚㼠㼑㼚㼚㼑㻌 㼚㼛㼚㻌
㼕㼚㼏㼘㼡㼟㻌 㼐㼍㼚㼟㻌 㼏㼑㼠㼠㼑㻌 㼘㼕㼟㼠㼑㻘㻌 㼛㼡㻌 㼐㼛㼚㼠㻌 㼘㼑㻌 㼓㼍㼕㼚㻌 㼑㼟㼠㻌 㼟㼡㼜㽴㼞㼕㼑㼡㼞㻌 㼍㼡㻌 㼓㼍㼕㼚㻌 㼙㼍㼤㼕㼙㼍㼘㻌 㼕㼚㼐㼕㼝㼡㽴㻘㻌 㼟㼛㼚㼠㻌 㼟㼠㼞㼕㼏㼠㼑㼙㼑㼚㼠㻌
㼕㼚㼠㼑㼞㼐㼕㼠㼟㻌㼜㼛㼡㼞㻌㼘㻓㼑㼤㼜㼘㼛㼕㼠㼍㼠㼕㼛㼚㻌㼐㼑㻌㼘㻓㽴㼙㼑㼠㼠㼑㼡㼞㻚㻌
㻌
㻵㻹㻼㻻㻾㼀㻭㻺㼀㻌㻺㻻㼀㻱㻦㻌 㻌
㻾㼍㼐㼕㼍㼠㼕㼛㼚㻌㻱㼤㼜㼛㼟㼡㼞㼑㻌㻿㼠㼍㼠㼑㼙㼑㼚㼠㻦㻌
㼀㼔㼑㻌㼜㼞㼛㼐㼡㼏㼠㻌㼏㼛㼙㼜㼘㼥㻌㼣㼕㼠㼔㻌㼠㼔㼑㻌㼁㻿㻛㻯㼍㼚㼍㼐㼍㻌㼜㼛㼞㼠㼍㼎㼘㼑㻌㻾㻲㻌㼑㼤㼜㼛㼟㼡㼞㼑㻌㼘㼕㼙㼕㼠㻌㼟㼑㼠㻌㼒㼛㼞㼠㼔㻌㼒㼛㼞㻌㼍㼚㻌㼡㼚㼏㼛㼚㼠㼞㼛㼘㼘㼑㼐㻌
㼑㼚㼢㼕㼞㼛㼚㼙㼑㼚㼠㻌 㼍㼚㼐㻌 㼍㼞㼑㻌 㼟㼍㼒㼑㻌 㼒㼛㼞㻌 㼕㼚㼠㼑㼚㼐㼑㼐㻌 㼛㼜㼑㼞㼍㼠㼕㼛㼚㻌 㼍㼟㻌 㼐㼑㼟㼏㼞㼕㼎㼑㼐㻌 㼕㼚㻌 㼠㼔㼕㼟㻌 㼙㼍㼚㼡㼍㼘㻚㻌 㼀㼔㼑㻌 㼒㼡㼞㼠㼔㼑㼞㻌 㻾㻲㻌
㼑㼤㼜㼛㼟㼡㼞㼑㻌 㼞㼑㼐㼡㼏㼠㼕㼛㼚㻌 㼏㼍㼚㻌 㼎㼑㻌 㼍㼏㼔㼕㼑㼢㼑㼐㻌 㼕㼒㻌 㼠㼔㼑㻌 㼜㼞㼛㼐㼡㼏㼠㻌 㼏㼍㼚㻌 㼎㼑㻌 㼗㼑㼜㼠㻌 㼍㼟㻌 㼒㼍㼞㻌 㼍㼟㻌 㼜㼛㼟㼟㼕㼎㼘㼑㻌 㼒㼞㼛㼙㻌 㼠㼔㼑㻌 㼡㼟㼑㼞㻌
㼎㼛㼐㼥㻌㼛㼞㻌㼟㼑㼠㻌㼠㼔㼑㻌㼐㼑㼢㼕㼏㼑㻌㼠㼛㻌㼘㼛㼣㼑㼞㻌㼛㼡㼠㼜㼡㼠㻌㼜㼛㼣㼑㼞㻌㼕㼒㻌㼟㼡㼏㼔㻌㼒㼡㼚㼏㼠㼕㼛㼚㻌㼕㼟㻌㼍㼢㼍㼕㼘㼍㼎㼘㼑㻚㻌
㻺㻻㼀㻱㻌㻵㻹㻼㻻㻾㼀㻭㻺㼀㻱㻦㻌 㻌
㻰㽴㼏㼘㼍㼞㼍㼠㼕㼛㼚㻌㼐㻓㼑㼤㼜㼛㼟㼕㼠㼕㼛㼚㻌㼍㼡㼤㻌㼞㼍㼐㼕㼍㼠㼕㼛㼚㼟㻦㻌
㻸㼑㻌㼜㼞㼛㼐㼡㼕㼠㻌㼑㼟㼠㻌㼏㼛㼚㼒㼛㼞㼙㼑㻌㼍㼡㼤㻌㼘㼕㼙㼕㼠㼑㼟㻌㼐㻓㼑㼤㼜㼛㼟㼕㼠㼕㼛㼚㻌㼜㼛㼡㼞㻌㼘㼑㼟㻌㼍㼜㼜㼍㼞㼑㼕㼘㼟㻌㼜㼛㼞㼠㼍㼎㼘㼑㼟㻌㻾㻲㻌㼜㼛㼡㼞㻌㼘㼑㼟㻌㻱㼠㼍㼠㼟㻙㼁㼚㼕㼟㻌
(IC: 4216A-AP2310A1 / Model: DAP-2310A1)
㼑㼠㻌㼘㼑㻌㻯㼍㼚㼍㼐㼍㻌㽴㼠㼍㼎㼘㼕㼑㼟㻌㼜㼛㼡㼞㻌㼡㼚㻌㼑㼚㼢㼕㼞㼛㼚㼚㼑㼙㼑㼚㼠㻌㼚㼛㼚㻌㼏㼛㼚㼠㼞㽿㼘㽴㻚㻌
㻸㼑㻌 㼜㼞㼛㼐㼡㼕㼠㻌 㼑㼟㼠㻌 㼟㾆㼞㻌 㼜㼛㼡㼞㻌 㼡㼚㻌 㼒㼛㼚㼏㼠㼕㼛㼚㼚㼑㼙㼑㼚㼠㻌 㼠㼑㼘㻌 㼝㼡㼑㻌 㼐㽴㼏㼞㼕㼠㻌 㼐㼍㼚㼟㻌 㼏㼑㻌 㼙㼍㼚㼡㼑㼘㻚㻌 㻸㼍㻌 㼞㽴㼐㼡㼏㼠㼕㼛㼚㻌 㼍㼡㼤㻌
㼑㼤㼜㼛㼟㼕㼠㼕㼛㼚㼟㻌㻾㻲㻌㼜㼑㼡㼠㻌㽵㼠㼞㼑㻌㼍㼡㼓㼙㼑㼚㼠㽴㼑㻌㼟㼕㻌㼘㻓㼍㼜㼜㼍㼞㼑㼕㼘㻌㼜㼑㼡㼠㻌㽵㼠㼞㼑㻌㼏㼛㼚㼟㼑㼞㼢㽴㻌㼍㼡㼟㼟㼕㻌㼘㼛㼕㼚㻌㼝㼡㼑㻌㼜㼛㼟㼟㼕㼎㼘㼑㻌㼐㼡㻌㼏㼛㼞㼜㼟㻌
㼐㼑㻌 㼘㻓㼡㼠㼕㼘㼕㼟㼍㼠㼑㼡㼞㻌 㼛㼡㻌 㼝㼡㼑㻌 㼘㼑㻌 㼐㼕㼟㼜㼛㼟㼕㼠㼕㼒㻌 㼑㼟㼠㻌 㼞㽴㼓㼘㽴㻌 㼟㼡㼞㻌 㼘㼍㻌 㼜㼡㼕㼟㼟㼍㼚㼏㼑㻌 㼐㼑㻌 㼟㼛㼞㼠㼕㼑㻌 㼘㼍㻌 㼜㼘㼡㼟㻌 㼒㼍㼕㼎㼘㼑㻌 㼟㼕㻌 㼡㼚㼑㻌 㼠㼑㼘㼘㼑㻌
㼒㼛㼚㼏㼠㼕㼛㼚㻌㼑㼟㼠㻌㼐㼕㼟㼜㼛㼚㼕㼎㼘㼑㻌
ẍᶳ嬎婆怑䓐⎘䀋⛘⋨
䴻✳⺷娵嫱⎰㟤ᷳỶ≇䌯⮬柣暣㨇炻朆䴻姙⎗炻℔⎠ˣ⓮嘇ㆾἧ䓐侭⛯ᶵ⼿
㑭冒嬲㚜柣䌯ˣ≈⣏≇䌯ㆾ嬲㚜⍇姕妰ᷳ䈡⿏⍲≇傥ˤ
Ỷ≇䌯⮬柣暣㨇ᷳἧ䓐ᶵ⼿⼙枧梃凒⬱ℐ⍲⸚㒦⎰㱽忂ᾉ烊䴻䘤䎦㚱⸚㒦䎦
尉㗪炻ㅱ䩳⌛ 䓐炻᷎㓡┬军䃉⸚㒦㗪㕡⼿两临ἧ䓐ˤ⇵枭⎰㱽忂ᾉ炻㊯ὅ
暣ᾉ㱽夷⭂ἄ㤕ᷳ䃉䶂暣忂ᾉˤỶ≇䌯⮬柣暣㨇枰⽵⍿⎰㱽忂ᾉㆾⶍ㤕ˣ䥹
⬠⍲慓䗪䓐暣㲊廣⮬⿏暣㨇姕⁁ᷳ⸚㒦ˤ