D Link AP2680A1 Wireless AC1750 Wave 2 Dual-Band PoE Access Point User Manual
D-Link Corporation Wireless AC1750 Wave 2 Dual-Band PoE Access Point
D Link >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3753165 |
| Application ID | 12hUP8PMxwymZrFXzsa5Tw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 64.36kB (804491 bits) |
| Date Submitted | 2018-02-14 00:00:00 |
| Date Available | 2018-02-27 00:00:00 |
| Creation Date | 2018-02-08 11:01:27 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2018-02-13 13:48:00 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 13.0 (Windows) |
Quick Installation Guide Wireless AC1750 Wave 2 Dual-Band PoE Access Point This document will guide you through the basic installation process for your new D-Link Wireless AC Access Point. DAP-2680 Quick Installation Guide Installationsanleitung Guide d’installation Guía de instalación Guida di Installazione Краткое руководство по установке Guia de Instalação Rápida 快速安裝指南 Petunjuk Pemasangan Cepat クイックインストールガイド Documentation also available on CD and via the D-Link Website ENGLISH DAP-2680 Quick Install Guide This installation guide provides basic instructions for installing the DAP-2680 Wireless Access Point on your network. For additional information about how to use the Access Point, please see the User’s Manual which is available on the CD included in this package or from the D-Link support website. System Requirements Minimum System Requirements: • CD-ROM Drive • an Ethernet port, or an installed Ethernet adapter • Internal Explore 11, Safari 7, Firefox 28, Google Chrome 33 or later versions of these browsers 1. Package Contents DAP-2680 802.11ac Power over Ethernet (PoE) Access Point Power Adapter (Optional) Mounting Brackets Ceiling Brackets Ethernet Cable CD-ROM Quick Install Guide If any of the above items are missing, please contact your reseller. NOTE no PSU supplied. To power the units use an D-Link 802.3at PoE switch or the D-Link DPE-301GI PoE injector. D-Link DAP-2680 Quick Install Guide ENGLISH 2. Hardware Overview LED Power/Status LED - Dual color (Red/green) . Flash Red during booting up or malfunction . Static Green while it’s ready/working . Solid Red while boot up fail Interfaces Power Receptor (*Note no longer used, replaced by PoE) LAN Port (PoE) * PoE kit (injector and adapter) is NOT include in the package and it can be purchased with the model name "DPE-301GI". D-Link DAP-2680 Quick Install Guide Power on the access point To power on the DAP-2680, you can use ONE of the following methods: 1. Plug one end of your Ethernet cable into the LAN port of the DAP-2680, and the other end into a port on a 802.3at PoE switch. 2. Purchase separately a DPE-301GI PoE injector if you need to connect the Access Point without a 802.3at PoE Switch. ENGLISH 3. Installation Configure the access point DAP-2680 OR 802.3at PoE Switch Computer PoE Injector Power Adapter Computer To set up and manage the DAP-2680, use one of the following methods: 1. Connect the access point and your computer to the same switch. Manage the access point from the computer. Enter 192.168.0.50 in the address field of your browser, which is the default IP address of the access point. Log in to the Administration Web pages. The default login information is: Username: admin Password: (Leave the password field blank) 2. Connect the access point and your computer via DPE-301GI. Manage the access point from the computer. Ensure your computer is configured with a static IP address in 192.168.0.0/24 subnet. Launch a web browser, type the default IP address of the access point (http://192.168.0.50) and then press Enter. Log in to the Administration Web pages. The default login information is: Username: admin Password: (Leave the password field blank) D-Link DAP-2680 Quick Install Guide ENGLISH Solid wall or ceiling Installation 1. Place the mounting bracket on a wall or ceiling. 4. Use the supplied screws to attach the mounting ring to the wall. 2. Mark the points where you will insert the screws. Take out the mounting ring. 5. Plug the Ethernet cable into the LAN port on the access point. 3. Drill holes in the marked points and insert the plastic wall anchors. 6. To attach the access point to the mounting bracket. D-Link DAP-2680 Quick Install Guide Installation 1. Clip two ceiling brackets onto the ceiling panels. Make sure both brackets are in line with each other. Ceiling crossbar 3. Plug the Ethernet cable into the LAN port on the access point. ENGLISH Mounting with a ceiling bracket 4. Place the DAP-2680’s male bracket in the mounting bracket’s female bracket. Click DAP-2680 and the mounting bracket to lock in position. Ceiling bracket 2. Use the provided screws to attach the mounting ring to the ceiling bracket. TECHNICAL SUPPORT D-Link DAP-2680 Quick Install Guide dlink.com/support ENGLISH CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications n ot e xpressly a pproved b y t he p arty r esponsible f or compliance could void the user’s authority to operate this equipment. 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 32cm between the radiator & your body. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. This device and it’s antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. D-Link DAP-2680 Quick Install Guide
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2018:02:08 11:01:27+08:00 Metadata Date : 2018:02:13 13:48+08:00 Modify Date : 2018:02:13 13:48+08:00 Creator Tool : Adobe InDesign CC 13.0 (Windows) Instance ID : uuid:e63a7adf-55c8-4f75-82c2-9cfeb34d7e4e Original Document ID : adobe:docid:indd:42269540-e48f-11de-9fe3-ce52012163ef Document ID : xmp.id:6a4d11b9-b69b-bf4c-87cd-609745b193df Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:21f1bcfb-6895-9148-a5c5-9cf45d1271d5 Derived From Document ID : xmp.did:21f1bcfb-6895-9148-a5c5-9cf45d1271d5 Derived From Original Document ID: adobe:docid:indd:42269540-e48f-11de-9fe3-ce52012163ef Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.0 (Windows) History Changed : / History When : 2018:02:08 11:01:27+08:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Has XFA : No Page Count : 7 Language : zh-TW Creator : Adobe InDesign CC 13.0 (Windows)EXIF Metadata provided by EXIF.tools