D Link AP2690B1 DAP-2690 AirPremier N Dual Band Concurrent PoE Access Point User Manual
D Link Corporation DAP-2690 AirPremier N Dual Band Concurrent PoE Access Point
D Link >
Contents
- 1. User Manual
- 2. User Manual rev.pdf
User Manual
Package Contents DAP-2690 802.11n Access Point Power Adapter PoE Base Unit Mounting Plate Ethernet Cable Console Cable CD-ROM Note: Using a power supply with a different voltage than the one included with the DAP-2690 will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. System Requirements Minimum System Requirements: ⢠CD-ROM Drive ⢠Computers with WindowsÂŽ, MacintoshÂŽ, or Linux-based operating systems ⢠Installed Ethernet Adapter ⢠Internet Explorer version 6.0, Chrome 2.0. Safari 3.0, or Firefox 3.0 and above DAP-2690 Install Guide Hardware Overview LEDs 5 GHz - When lit, the access point is operating at 5GHz. This light will blink when there is wireless traffic. 2.4 GHz - When lit, the access point is operating at 2.4GHz. This light will blink when there is wireless traffic. LAN - Solid light when the Ethernet port is connected to a working port, such as a router or switch. The light will blink when there is traffic through LAN port. POWER - The light will blink during boot up. Once solid, the access point is ready. DAP-2690 Install Guide Installing the Hardware 5GHz Antenna Connectors* Reset Button Power Receptor Console Port LAN Port (PoE) * 2.4GHz antenna connectors are located on the bottom of the access point. DAP-2690 Install Guide To power the access point, you can use one of the following 3 methods: Method 1 - Use if you have a PoE switch. Method 2 - Use if you do not have a PoE switch and do not have a power outlet near the location of the access point. Method 3 - Use if you do not have a PoE switch and have a power outlet near the location of the access point. Method 1 1. Connect one end of your Ethernet cable into the LAN (PoE) port on the DAP-2690. 2. Connect the other end into one port on a PoE switch. DAP-2690 Install Guide Method 2 1. Connect one end of an Ethernet cable into the Data In port on the PoE base unit and the other end into one port on your switch, router, or computer. 2. Connect one end of an Ethernet cable into the P+Data Out port on the PoE base unit and the other end into the LAN (PoE) port on the DAP-2690 access point. 3. Use the supplied power adapter. Connect the power adapter to the Power In receptor on the PoE adapter. 4. Connect the power cable to the power adapter and then connect the other end into a power outlet. DAP-2690 Install Guide Method 3 1. Connect one end of your Ethernet cable into the LAN (PoE) port on the DAP-2690 and then connect the other end to a switch, router, or computer. 2. Use the supplied power adapter. Connect the power adapter to the Power receptor on the DAP-2690 access point. 3. Connect the power cable to the power adapter and then connect the other end into a power outlet. DAP-2690 Install Guide Mounting Plate Assembly Step 1: Insert the provided wall anchors in the wall where the mounting plate will be attached. Step 2: Use the provided screws to secure the mounting plate on the wall. DAP-2690 Install Guide Step 3: Attach the remaining screws securely to the back of the DAP-2690. Step 4: Attach the DAP-2690 to the mounting plate. DAP-2690 Install Guide Step 5: Slide the DAP-2690 down into the grooves on the mounting plate to secure it to the plate. 10 DAP-2690 Install Guide Your Setup is Complete When you have completed the steps in this Installation Guide and configured your for your network, your network should look similar to this: To setup and manage the DAP-2690 from a computer, use one of the following methods: 1. Connect a straight through Ethernet cable between the access point and your computer. 2. Connect the access point to a switch or router and use a computer from a computer that is also connected to that switch or router. * Maximum Wireless signal rate derived from IEEE 802.11n (draft 2.0) specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate. DAP-2690 Install Guide 11 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the userâs authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. )RURSHUDWLRQZLWKLQa*+]LWLVUHVWULFWHGWRLQGRRUHQYLURQPHQW7KLVGHYLFH PHHWVDOOWKHRWKHUUHTXLUHPHQWVVSHFLILHGLQ3DUW(6HFWLRQRIWKH)&&5XOHV Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 12 DAP-2690 Install Guide Industry Canada statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme Ă la norme CNR-210 dâIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prĂŠjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indĂŠsirable. Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. Avertissement: Le guide dâutilisation des dispositifs pour rĂŠseaux locaux doit inclure des instructions prĂŠcises sur les restrictions susmentionnĂŠes, notamment (i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont rĂŠservĂŠs uniquement pour une utilisation Ă lâintĂŠrieur afin de rĂŠduire les risques de brouillage prĂŠjudiciable aux systèmes de satellites mobiles utilisant les mĂŞmes canaux; (ii)OHJDLQPD[LPDOGÂśDQWHQQHSHUPLV SRXUOHVGLVSRVLWLIVXWLOLVDQWODEDQGH MHz) doit se conformer Ă la limite de p.i.r.e. spĂŠcifiĂŠe pour lâexploitation point Ă point et non point Ă point, selon le cas. DAP-2690 Install Guide 13 Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. DĂŠclaration dâexposition aux radiations: Cet ĂŠquipement est conforme aux limites dâexposition aux rayonnements IC ĂŠtablies pour un environnement non contrĂ´lĂŠ. Cet ĂŠquipement doit ĂŞtre installĂŠ et utilisĂŠ avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. 䝼ä¸čŚčŞéŠç¨ĺ°çŁĺ°ĺ çśĺĺźčŞčĺć źäšä˝ĺçĺ°é ťéťćŠďźéçśč¨ąĺŻďźĺ Źĺ¸ăĺčć使ç¨č ĺä¸ĺžć čŞčŽć´é ťçăĺ 大ĺçćčŽć´ĺč¨č¨äšçšć§ĺĺč˝ă ä˝ĺçĺ°é ťéťćŠäšä˝żç¨ä¸ĺžĺ˝ąéżéŁčŞĺŽĺ ¨ĺ嚲ćžĺćłé俥ďźçśçźçžć嚲ćžçžčąĄćďźćçŤĺłĺ ç¨ďźä¸ŚćšĺčłçĄĺš˛ćžććšĺžçšźçşä˝żç¨ăĺé ĺćłé俥ďźćäžéťäżĄćłčŚĺŽä˝ćĽäšçĄçˇéťé俥ăä˝ ĺçĺ°é ťéťćŠé ĺżĺĺćłé俥ć塼ćĽăç§ĺ¸ĺéŤçç¨éťćł˘čźťĺ°ć§éťćŠč¨ĺäšĺš˛ćžă 5.25 ~ 5.35GHz éĺŽ¤ĺ §ä˝żç¨ 14 DAP-2690 Install Guide Notes DAP-2690 Install Guide 15 Technical Support D-Linkâs website contains the latest user documentation and software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support through our website or by phone. United States Telephone (877) 453-5465 World Wide Web http://support.dlink.com Canada Telephone (800) 361-5265 World Wide Web http://support.dlink.ca Version 2.01 August 6, 2012 Copyright Š2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein. Visit www.dlink.com for more details.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2012:08:06 16:08:22+08:00 Metadata Date : 2012:09:12 10:30:01+08:00 Modify Date : 2012:09:12 10:30:01+08:00 Creator Tool : Adobe InDesign CS4 (6.0.6) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 9144 bytes, use -b option to extract) Instance ID : uuid:781c5184-517c-4285-a5ba-7f4cfc2d5ad3 Document ID : xmp.did:E387EB969DDFE111A74AE7903D200407 Original Document ID : adobe:docid:indd:f9b306c3-c321-11de-a323-a48ec7432440 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:E287EB969DDFE111A74AE7903D200407 Derived From Document ID : xmp.did:CD191D8F6ED4E111912EAFF19ED6DBD0 Derived From Original Document ID: adobe:docid:indd:f9b306c3-c321-11de-a323-a48ec7432440 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:C5191D8F6ED4E111912EAFF19ED6DBD0, xmp.iid:C6191D8F6ED4E111912EAFF19ED6DBD0, xmp.iid:C7191D8F6ED4E111912EAFF19ED6DBD0, xmp.iid:C8191D8F6ED4E111912EAFF19ED6DBD0, xmp.iid:C9191D8F6ED4E111912EAFF19ED6DBD0, xmp.iid:CA191D8F6ED4E111912EAFF19ED6DBD0, xmp.iid:CB191D8F6ED4E111912EAFF19ED6DBD0, xmp.iid:CC191D8F6ED4E111912EAFF19ED6DBD0, xmp.iid:CD191D8F6ED4E111912EAFF19ED6DBD0, xmp.iid:CE191D8F6ED4E111912EAFF19ED6DBD0, xmp.iid:96B434407CD4E111912EAFF19ED6DBD0, xmp.iid:FEA29E9203D6E111A8A2E671E300E8BF, xmp.iid:FFA29E9203D6E111A8A2E671E300E8BF, xmp.iid:00A39E9203D6E111A8A2E671E300E8BF, xmp.iid:01A39E9203D6E111A8A2E671E300E8BF, xmp.iid:02A39E9203D6E111A8A2E671E300E8BF, xmp.iid:03A39E9203D6E111A8A2E671E300E8BF, xmp.iid:04A39E9203D6E111A8A2E671E300E8BF, xmp.iid:E287EB969DDFE111A74AE7903D200407, xmp.iid:E387EB969DDFE111A74AE7903D200407 History When : 2012:07:23 10:31:51+08:00, 2012:07:23 10:31:51+08:00, 2012:07:23 10:58:26+08:00, 2012:07:23 11:01:12+08:00, 2012:07:23 11:05:45+08:00, 2012:07:23 11:33:33+08:00, 2012:07:23 11:38:46+08:00, 2012:07:23 11:41:22+08:00, 2012:07:23 11:41:22+08:00, 2012:07:23 11:46:25+08:00, 2012:07:23 12:09:51+08:00, 2012:07:25 10:51:03+08:00, 2012:07:25 10:51:39+08:00, 2012:07:25 10:54:56+08:00, 2012:07:25 11:20+08:00, 2012:07:25 11:22:03+08:00, 2012:07:25 11:22:15+08:00, 2012:07:25 11:22:23+08:00, 2012:08:06 16:06:13+08:00, 2012:08:06 16:06:13+08:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 100.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Y Resolution : 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 100.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : xmp.iid:A0F65D0D7CD4E111BD22928682D9B82C, xmp.iid:625E09F871D4E1118FE8A7ABFEE458B1, uuid:144D7C3EAE7311DE870E86C1748E5B68, uuid:70C825AE0D21DD11851DAECD5D7FA256, uuid:1A91017E5FB0DD118B0EC2A1E32CBEA2, uuid:93E429D913C3DE11A83DC32C9A2309B0, uuid:EECBCA19C3C011DE9B11F957D0A9A394, uuid:144D7C38AE7311DE870E86C1748E5B68, uuid:13F0A46D790DDD11A48E958C5BA7E395, xmp.iid:53076D3C95DFE111A13797B4D121F6AB, uuid:6811C73725C3DE11B5229FE368216B65, xmp.iid:899E576E06D6E111941CD7354117F402, xmp.iid:889E576E06D6E111941CD7354117F402, uuid:9FD8CE2E8CEB11DB8E7AC54645449DB6, uuid:C60F6041AE8011DEA23AE33ED5C8F5CA, uuid:B1C915CC1BADDE11A22EDE6DBAFDEDE6, uuid:67D08A01AE9511DEA23AE33ED5C8F5CA, uuid:BC970E57AE7111DE870E86C1748E5B68, uuid:3797DFC5BA6A11DE91B6A389CC207B10, uuid:51cbf5cc-6f85-11d8-b488-8c52e61d32bd Manifest Reference Document ID : uuid:4BC79364AF5E11DEB07792B31F61E427, xmp.did:605E09F871D4E1118FE8A7ABFEE458B1, uuid:0AC9D2BE3405DD118400BE9B39C75409, adobe:docid:photoshop:a6740349-585a-11da-af11-cf2357ad247d, uuid:1991017E5FB0DD118B0EC2A1E32CBEA2, uuid:1E6D5501BE4B11DEA5339DB7F171351A, uuid:EECBCA18C3C011DE9B11F957D0A9A394, uuid:A0F904BB830DDD11A48E958C5BA7E395, uuid:12F0A46D790DDD11A48E958C5BA7E395, uuid:1A4AA9EEAEAC11DE870E86C1748E5B68, uuid:919C7C2408C3DE11A83DC32C9A2309B0, uuid:D6671BA807C3DE11A83DC32C9A2309B0, uuid:959C7C2408C3DE11A83DC32C9A2309B0, uuid:9FD8CE2D8CEB11DB8E7AC54645449DB6, uuid:9FD8CE328CEB11DB8E7AC54645449DB6, uuid:BA62FF9C8CEB11DB8E7AC54645449DB6, uuid:BA62FFA18CEB11DB8E7AC54645449DB6, uuid:BA62FFA68CEB11DB8E7AC54645449DB6, uuid:21DF2FEFB310DD1199FBF98762246894, adobe:docid:photoshop:51cbf5c9-6f85-11d8-b488-8c52e61d32bd Doc Change Count : 221 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 16 Creator : Adobe InDesign CS4 (6.0.6)EXIF Metadata provided by EXIF.tools