User Manual.pdf
@ 4; connect «1:52 AM Let's register your hub If you don't have a hub, tap Buy a Hub to explore your options. Choose your hub to get started. Close Buy 3 Hub aunt ta 53AM Connect Hub Plug one end of the Ethernet cable into the hub and the other end into a free port on your wireless router. Make sure that the hub and your iPad are on the same network. Plug the power cable into the hub and the wall. cam“ - m 53AM Check Connection Wait a minute, then check the hub. All three green lights should be lit. I1 they are, tap NexL am“ cam!“ - w 5: AM Register Hub w 55 AM Your hub was successfully registered! Wouid you Elke IO connec: your hub m a wneless neiwork? H not, lap Get Started. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. 7 Increase the separation between the equipment and receiver: - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body, IC Statement This device complies with RSS-210 ofthe Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme a la norme CNR-210 d'lndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage recu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrélé. Cet équipement doit étre installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : GPL Ghostscript 9.0 Keywords : Modify Date : 2014:10:03 18:08:27+08:00 Create Date : 2014:10:02 18:59:47+08:00 Creator Tool : PDFCreator Version 1.2.0 Metadata Date : 2014:10:03 18:08:27+08:00 Document ID : c57ec46c-4c7e-11e4-0000-e68cedf753ca Instance ID : uuid:bcfce1bf-4ac1-411e-9458-b1502f9cfc6e Format : application/pdf Title : User Manual.pdf Creator : catrlin Description : () Page Count : 8 Subject : Author : catrlinEXIF Metadata provided by EXIF.tools