D Link CHS150A1 mydlinkTM Wi-Fi Motion Sensor User Manual

D Link Corporation mydlinkTM Wi-Fi Motion Sensor

User Manual.pdf

D-Link Version: 0.1 02/01/2014                      UserManual             WiFi Motion Sensor  DCH-S150
D-Link DCH-S150  User Manual 2  Table  of Contents                 Table  of Contents  Product Overview ........................................................ 3 Package Contents ................................................... 3 System Requirements ............................................. 4 Introduction .............................................................. 5 Features .................................................................. 6 Hardware Overview ................................................. 7 Connections ....................................................... 7 Side.................................................................... 8  Installation.................................................................... 9 Connecting the Powerline AV Adapter .................... 9  Technical Specifications........................................... 10 Federal Communication Commission Interference Statement .............................................................. 11
D-Link DCH-S150  User Manual 3 Section 1 - Product Overview     Package Contents    D-Link DCH-S150 WiFi Motion Sensor
D-Link DCH-S150  User Manual 4 Section 1 - Product Overview     System Requirements    Network Requirements  IEEE 802.11b/g/n wireless clients App-based Configuration Device Requirements Operating System:  iOS6/7 or above  Android 4.0/4.2 or above.
D-Link DCH-S150  User Manual 5 Section 1 - Product Overview     Introduction   Automate your connected home devices wirelessly using a PIR motion detection sensor with the D-Link DCH-S150 Motion Detection Sensor. Simply connect it to your wireless network at a touch of a button and it will trigger devices connected to a D-Link SmartPlug any time motion is detected. No matter  if  it’s  a  lamp  or  a  fan,  with  the  DCH-S150,  you  can  automatically  trigger  devices  plugged  to  wirelessly-connected  D-Link  SmartPlugs throughout your home. Even more, you can stay updated with instant push notifications to your mobile device while you’re away from home; so you’ll know when someone is home.
D-Link DCH-S150  User Manual 6 Section 1 - Product Overview     Features    Compatible with 802.11b/g and 802.11n  Devices -  The  DCH-S150 is fully compatible  with  the 802.11b/g/n standards.    WPS  PBC  -  (Wi-Fi Protected Setup  Push Button  Configuration) Push Button  Configuration  is  a button that  can be pressed to add  the  device to an  existing  network  or to create a new  network.  A virtual button can be used on the utility while a physical button  is placed on the  side  of the device.  This easy  setup  method allows  you  to  form  a secured  wireless link between the  DCH-S150  and another WPS enabled device. A PC is no longer needed to log into the Web-based interface.    User-friendly Setup Wizard - Through its easy-to-use app-based which iOS or Android system user you can  configure your access point to your specific settings within minutes.
D-Link DCH-S150  User Manual 7 Section 1 - Product Overview     Hardware Overview Connections                                               Motion Sensor
D-Link DCH-S150  User Manual 8 Section 1 - Product Overview   Hardware Overview Side                                        Status LED Reset button WPS button
D-Link DCH-S150  User Manual  9   Section 2 - Installation    Installation  Connecting the WiFi Motion Sensor   It is easy to connect the DCH-S150 s i m p l y  by performing the following instructions:   1. Plug  the  DCH-S150 into the  wall outlet/socket, then follow App user guide.
D-Link DCH-S150  User Manual  10
D-Link DCH-S150  User Manual  11 Appendix  A  - Technical Specifications        DEVICE INTERFACES  Technical Specifications  DIMENSIONS • 802.11n WLAN (AP wireless connection to computers) •  Common connect button • Reset button  WIRELESS LAN • 802.11b/g standards • 802.11n standard • Wireless speed: up to 300  Mbps (802.11n) • 64/128-bit WEP  data encryption • WPA/WPA2  (Wi-Fi Protected Access)  ADVANCED FEATURES • IPv6 support  OPERATION MODES • AP 2.4 GHz • 58 x 54 x 42.85 mm  WEIGHT • 80 grams (0.176  lb)  MAXIMUM POWER CONSUMPTION • AC: 3 watts  TEMPERATURE • Operating: 0 to 45 °C (32  to 113 °F) • Storage: -20 to 65 °C (-4 to 149 °F)  HUMIDITY • Operating: 10%  to 90% non-condensing • Storage: 5% to 95% non-condensing  CERTIFICATIONS • FCC • IC • UL         1. Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput  rate. Environmental conditions will adversely affect wireless signal range. 2. Range varies depending on country’s regulation. 3. Do not use for Live & Security, Remote Control, or Energy Management
D-Link DCH-S150  User Manual  12 Appendix  A  - Technical Specifications      Federal Communication Commission Interference Statement   This device complies with Part  15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may  not cause harmful interference, and  (2) this device must accept any interference received, including interference that  may cause undesired operation.  This equipment has been tested and  found  to comply with the limits for a Class B digital device, pursuant to Part  15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,  uses and can radiate radio frequency  energy and, if not  installed and used in accordance with  the instructions, may cause harmful interference to  radio communications. However,  there  is no guarantee that interference will not occur  in a particular installation.  If this equipment does cause harmful interference to radio  or television reception, which  can  be determined by turning  the equipment off and  on,  the  user is encouraged to try to correct the interference by one of the  following measures: - Reorient or relocate the  receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an  outlet  on  a  circuit different  from that  to which the receiver is connected. -  Consult the dealer or an experienced radio/TV technician for help.  FCC Caution:  Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority  to operate this equipment.  This transmitter must  not be co-located or operating in conjunction with any  other antenna or transmitter.  Note:  The  country code selection is for non-US model  only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must  fixed to US operation channels  only.  Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set  forth for an uncontrolled environment. This equipment should be  installed and operated with minimum distance 20cm between the  radiator & your body.
D-Link DCH-S150  User Manual  13 Appendix  C - Technical Specifications      Industry  Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and  (2) this device must accept any interference received, including interference that  may cause undesired operation. Ce dispositif est conforme à la norme  CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et  (2) ce  dispositif  doit accepter tout  brouillage reçu, y compris un  brouillage susceptible de provoquer un fonctionnement indésirable.  Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be  installed and operated with minimum distance 20cm between the  radiator & your body.  Declaration d’exposition aux radiations:Cet equipement est conforme aux  limites  d’exposition aux rayonnements IC etablies pour un environnement non  controle. Cet equipement doit etre installe et utilise  avec un  minimum  de 20 cm de distance entre la source de rayonnement et votre corps.

Navigation menu