D Link CS7000LA1 Wireless AC Day/Night HD Mini Bullet Cloud Camera User Manual
D Link Corporation Wireless AC Day/Night HD Mini Bullet Cloud Camera
D Link >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2422111 |
| Application ID | UNlAn9Z2qLPpGlgLnYNC9Q== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 210.46kB (2630796 bits) |
| Date Submitted | 2014-10-20 00:00:00 |
| Date Available | 2014-10-20 00:00:00 |
| Creation Date | 2017-10-20 20:01:29 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-20 20:01:29 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC (Windows) |
Version 1.0 | 05/05/2014 User Manual Wireless AC Day/Night HD Mini Bullet Cloud Camera DCS-7000L Manual Overview D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change. Please refer to the www.mydlink.com website for the most current information. Manual Revisions Revision Date 1.0 May 5, 2014 Description DCS-7000L Revision A1 with irmware version 1.00 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright © 2014 D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation. D-Link DCS-7000L User Manual Table of Contents Manual Overview............................................................... 2 Manual Revisions .......................................................................... 2 Trademarks ..................................................................................... 2 Product Overview .............................................................. 4 Package Contents ......................................................................... 4 Introduction ................................................................................... 6 Features............................................................................................ 7 Hardware Overview ..................................................................... 8 Front .......................................................................................... 8 Rear ............................................................................................ 9 Adjusting Camera Focus ..........................................................10 Software Installation .......................................................11 Zero Coniguration Setup ........................................................12 Camera Setup Wizard ................................................................16 Windows Users ....................................................................16 Mac Users...............................................................................17 Manual Hardware Installation................................................18 Wireless Installation Considerations ....................................19 WPS - Push Button Setup .........................................................20 mydlink.............................................................................21 Coniguration ...................................................................22 Live Video ......................................................................................23 Setup ...............................................................................................25 D-Link DCS-7000L User Manual Setup Wizard ........................................................................25 Network Setup .....................................................................31 Wireless Setup......................................................................34 Dynamic DNS .......................................................................35 Image Setup .........................................................................36 Audio and Video..................................................................38 Preset.......................................................................................40 Motion Detection ...............................................................42 Sound Detection .................................................................43 Time and Date......................................................................44 Event Setup ...........................................................................45 SD Card ...................................................................................52 Advanced ......................................................................................53 ICR and IR ...............................................................................53 HTTPS ......................................................................................54 Access List..............................................................................55 Maintenance ................................................................................56 Device Management .........................................................56 System ....................................................................................57 Firmware Upgrade..............................................................58 Status ..............................................................................................59 Device Info ............................................................................59 Logs .........................................................................................60 Help .........................................................................................61 Technical Speciications ..................................................62 Section 1: Product Overview Product Overview Package Contents DCS-7000L Wireless AC Day/Night HD Mini Bullet Cloud Camera Wall mount kit Power adapter CD-ROM with User Manual and software Quick Installation Guide If any of the above items are missing, please contact your reseller. Note: Using a power supply with a diferent voltage than the one included with your product will cause damage and void the warranty for this product. D-Link DCS-7000L User Manual Section 1: Product Overview System Requirements Network Requirements CD Setup Wizard Requirements Web-based Coniguration Utility Requirements • 10/100 Ethernet network or an 802.11ac/n/g/b/a wireless network Computer with the following: • A PC with a wired connection to your router • Windows® 8 (32/64bit), Windows® 7 (32/64bit), XP (32/64bit),Vista® (32/64bit), Mac OS®X 10.5 or above • An Internet connection • A router connected to your broadband modem Browser Requirements: • Internet Explorer 7 or higher • Firefox 12 or higher • Safari 6 or higher • Chrome 20 or higher Note: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. mydlink Website Requirements D-Link DCS-7000L User Manual • Broadband Internet connection • Computer with: • Internet Explorer 7 or higher (ActiveX) • Firefox 12 or higher • Safari 6 or higher • Chrome 20 or higher Section 1: Product Overview Introduction Congratulations on your purchase of the DCS-7000L Wireless AC Day/Night HD Mini Bullet Cloud Camera, a versatile surveillance and security solution for your home or small oice. Designed for indoor day or night operation, the camera supports distances of up to ive meters in darkness. With Wireless AC support which eliminates the need for network cabling, the DCS-7000L can be accessed remotely, and controlled from any PC or notebook over your local network or through the Internet using a web browser. The simple installation and intuitive web-based interface ofer easy integration with your existing network. The included D-Link D-ViewCam™ is a sophisticated piece of software which allows users to manage up to 32 network cameras, set email alert notiications, create recording schedules, and use motion detection to record directly to a hard drive. D-ViewCam™ also allows users to upload a loor plan to create a realistic layout of the premises where cameras are located, further simplifying the management process. D-Link DCS-7000L User Manual Section 1: Product Overview Features Simple to Use The DCS-7000L is a stand-alone system with a built-in CPU, requiring no special hardware or software. The DCS-7000L supports both ActiveX mode for Internet Explorer and Java mode for other browsers such as Chrome®, Firefox®, and Safari®. Supports a Variety of Platforms Supports TCP/IP networking, HTTP, and other Internet related protocols. The DCS-7000L can also be integrated easily into other Internet/Intranet applications because of its standards-based features. Web Coniguration Using a standard Web browser, administrators can conigure and manage the DCS-7000L directly from its own Web page via Intranet or Internet. This means you can access your DCS-7000L anytime, anywhere in the world. All-Day Surveillance with low light color image capability With built-in infrared LEDs let you monitor an area 24 hours a day, even in areas with low light or complete darkness, the DCS-7000L is a versatile surveillance and security monitoring device. Broad Range of Applications With today’s high-speed Internet services, the DCS-7000L can provide the ideal solution for delivering live video images over the Intranet and Internet for remote monitoring. The DCS-7000L allows remote access using a Web browser for live image viewing, and allows the administrator to manage and control the DCS-7000L anytime, anywhere in the world. Many applications exist, including industrial and public monitoring of homes, oices, banks, hospitals, child-care centers, and amusement parks. 802.11ac Wireless or Ethernet/Fast Ethernet Support The DCS-7000L ofers wireless 802.11ac and Ethernet/Fast Ethernet connectivity, making the DCS-7000L easy to integrate into your existing network environment. The DCS-7000L works with 10/100 Mbps Ethernet based networks for traditional wired environments, and works with 802.11ac routers or access points for added lexibility. The Site Survey feature also allows you to view and connect to any available wireless networks. Remote Monitoring Utility The D-ViewCam application adds enhanced features and functionality for the DCS-7000L and allows administrators to conigure and access the DCS-7000L from a remote site via Intranet or Internet. Other features include image monitoring, recording images to a hard drive, viewing up to 32 cameras on one screen, and taking snapshots. D-Link DCS-7000L User Manual Section 1: Product Overview Hardware Overview Front IR LEDs Power/Link LED Light Sensor Measures the lighting conditions and switches between color and infrared accordingly. Camera Lens Records video of the surrounding area D-Link DCS-7000L User Manual Used to illuminate the camera's ield of view at night Indicates the camera's current status Section 1: Product Overview Rear Power Connector Reset Button Press and hold this button for 10 seconds to reset the camera WPS Button Press this button for 3 seconds, then within the next 60 seconds press the WPS button on your router to set up a wireless connection automatically Audio In microSD Card Slot Audio Out Ethernet Port D-Link DCS-7000L User Manual Connects to the included DC 5 V power adapter Connect an audio jack to override the built-in audio input Insert a microSD or microSDHC card to store recordings (max. capacity 32 GB) Connect an audio jack for audio output RJ45 connector for Ethernet Section 1: Product Overview Adjusting Camera Focus Use the included focus adjustment tool to adjust the camera focus by rotating the circular frame around the lens clockwise or anti-clockwise. Note: For ine tuning the focus, it is recommended to use the included focus adjustment tool rather than attempting to adjust the lens with your ingers or other objects. D-Link DCS-7000L User Manual 10 Section 2: Installation Software Installation There are three ways to set up your camera: Zero Coniguration Setup: If you have a mydlink-enabled router, this is the easiest way to set up your camera. Refer to page 12. Camera Setup Wizard: If you do not have a mydlink-enabled router, use the Camera Installation Wizard to guide you through setup and initial coniguration of your camera. Refer to page 16. Manual Hardware Installation: This section shows you how to manually set up your camera, though in order to use the mydlink features of your camera, you will still need to run the Camera Installation Wizard. Refer to page 18. D-Link DCS-7000L User Manual 11 Section 2: Installation Zero Coniguration Setup If you have a D-Link Cloud Router, you can take advantage of Zero Coniguration. Zero Coniguration automatically conigures your camera's settings for you, and adds it to your mydlink account automatically. This type of setup allows you to set up your camera by simply plugging it in and connecting it to your router. Connect your camera to your mydlink enabled cloud router and Zero Coniguration will automatically conigure your DCS-7000L and automatically add the camera to your mydlink account. You can now remotely access your camera from the mydlink.com website to manage and monitor your DCS-7000L. Connect the Ethernet Cable If using an Ethernet connection: Connect the included Ethernet cable to the Ethernet port located on the back of the DCS-7000L and connect it to your router. Attach the External Power Supply Attach the external power supply to the DC Power receptor located on the rear panel of the DCS-7000L and connect it to your wall outlet or power strip. D-Link DCS-7000L User Manual 12 Section 2: Installation Optional: WPS Wireless Connection Alternatively, if your router supports WPS, you can use the WPS button on the camera to easily create a secure wireless connection to your network. To create a WPS connection: Step 1 Press and hold the WPS button for approximately 5-6 seconds. The blue WPS status LED above the button will blink. Step 2 Within 60 seconds press the WPS button on your router. On some routers, you may need to log in to the web interface and click on an on-screen button to activate the WPS feature. If you are not sure where the WPS button is on your router, please refer to your router’s User Manual. WPS Button The DCS-7000L will automatically create a wireless connection to your router. While connecting, the status LED will lash. When the connection process is complete, the status LED will turn solid. Note: If your router does not support WPS, you can still use the wired connection method on the previous page. After Zero Coniguration setup is complete, your router's wireless settings will be automatically transferred to the camera. D-Link DCS-7000L User Manual 13 Section 2: Installation Check Your mydlink Account From any computer, open a web browser, go to http://www.mydlink.com and log into your account. Once mydlink detects your camera, a New Device Found! notice will appear in the bottom-left corner. Click on the device name to continue. A summary and confirmation notification will appear with the automatically conigured details. Make a note of the details and click Yes to add the camera to your account. D-Link DCS-7000L User Manual 14 Section 2: Installation Zero Coniguration is now complete and your camera has been added to your mydlink account. You can now view your camera on the mydlink Live View tab. If you wish to connect your camera to your router wirelessly, you can simply disconnect the Ethernet cable and move the camera to its intended location; your router's wireless settings have been automatically transferred to the camera, and no further coniguration is required. Your camera is now set up, and you can skip to "mydlink" on page 21 to learn more about the mydlink features of this camera, or to "Coniguration" on page 22 for advanced coniguration of your camera. D-Link DCS-7000L User Manual 15 Section 2: Installation Camera Setup Wizard If you do not have a mydlink-enabled Cloud Router, you can use the Camera Setup Wizard to guide you through the process of adding your camera to the mydlink service. Windows Users Insert the Installation CD-ROM into your computer’s optical drive to start the autorun program. If the autorun program does not open, go to My Computer, browse to your CD drive, and double-click on the autorun.exe ile. Once the wizard has started simply click Set up your Cloud Camera to go through the Setup Wizard, which will guide you step-by-step through the installation process from connecting your hardware to coniguring your camera and registering it with your mydlink account. D-Link DCS-7000L User Manual 16 Section 2: Installation Mac Users Insert the Installation CD-ROM into your computer’s optical drive. On the desktop, open your CD drive and double-click on the SetupWizard ile. After about 20-30 seconds, the Setup Wizard will open, which will guide you step-by-step through the installation process from connecting your hardware to coniguring your camera and registering it with your mydlink account. D-Link DCS-7000L User Manual 17 Section 2: Installation Manual Hardware Installation If you wish to set up your camera without using the Camera Setup Wizard, please follow these steps. Note: In order to use the mydlink features of this product, you will need to go through the Camera Setup Wizard. Attach the External Power Supply Attach the external power supply to the DC Power receptor located on the rear panel of the DCS-7000L and connect it to your wall outlet or power strip. Connect the Ethernet Cable Connect the included Ethernet cable to the network cable connector located on the panel at the rear of the DCS-7000L and attach it to the network. D-Link DCS-7000L User Manual 18 Section 2: Installation Installation Wireless Installation Considerations This D-Link device can connect to your wireless network from anywhere within the operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines: 1. Minimize the number of walls and ceilings between your adapter and other network devices (such as your DCS-7000L) - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters). 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle, it looks over 42 feet (14 meters) thick. Position your devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building materials make a diference. A solid metal door or aluminum studs may weaken the wireless signal. Try to position your access points, wireless routers, and other networking devices where the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (ish tanks), mirrors, ile cabinets, brick, and concrete will degrade your wireless signal. 4. Keep your product at least 3-6 feet or 1-2 meters away from electrical devices or appliances that generate RF noise. 5. If you are using 2.4 GHz cordless phones or other radio frequency sources (such as microwave ovens), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DCS-7000L User Manual 19 Section 2: Installation WPS - Push Button Setup If your router supports WPS, you can use the WPS button on the camera to easily create a secure wireless connection to your network. To create a WPS connection: Step 1 Press and hold the WPS button for approximately 5-6 seconds. The blue WPS status LED above the button will blink. Step 2 Within 60 seconds press the WPS button on your router. On some routers, you may need to log in to the web interface and click on an on-screen button to activate the WPS feature. WPS Button The DCS-7000L will automatically create a wireless connection to your router. While connecting, the status LED will lash. When the connection process is complete, the status LED will turn solid. D-Link DCS-7000L User Manual 20 Section 3: mydlink mydlink After registering your DCS-7000L camera with a mydlink account in the Camera Setup Wizard. You will be able to remotely access your camera from the www.mydlink.com website. After signing in to your mydlink account, you will see a screen similar to the following: For more details on using your camera with mydlink, go to the Support section of the mydlink website and check the User Manual section for your product to ind the latest instruction guide for your camera's mydlink features. D-Link DCS-7000L User Manual 21 Section 4: Coniguration Coniguration After completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in Web coniguration interface is designed to allow you to easily access and conigure your DCS-7000L. At the end of the wizard, enter the IP address of your camera into a web browser, such as Internet Explorer®. To log in, use the User name admin and the password you created during the setup process. If you did not create a password, the default password is blank. After entering your password, click OK. Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the default IP is 192.168.0.20. D-Link DCS-7000L User Manual 22 Section 4: Coniguration Live Video This section shows your camera’s live video. You may select any of the available icons listed below to operate the camera. You may also select your language using the drop-down menu on the left side of the screen. You can zoom in and out on the live video image using your mouse. Right-click to zoom out or left-click to zoom in on the image. SD Status: This option displays the status of the SD card. If no SD card has been inserted, this screen will display the message "Card Invalid." Motion Trigger Indicator Recording Indicator This indicator will change color when a trigger event occurs. Note: The video motion feature for your camera must be enabled. When a recording is in progress, this indicator will change color. Auto Pan This control pad can be used to electronically pan, tilt, and zoom (ePTZ) within the camera's predeined view area, if one has been deined. Starts the automatic panning function. The ROI will pan from back and forth within the FOV Stop Stops automatic panning. Preset Path Starts the camera's motion along the predeined path. Control Pad D-Link DCS-7000L User Manual 23 Section 4: Coniguration ePTZ Speed: You may select a value between 0 and 64. 0 is the slowest and 64 is the fastest. Global View: This window indicates the total ield of view (FOV) of the camera. The red box indicates the visible region of interest (ROI). Language: You may select the interface language using this menu. Go To: If any presets have been deined, selecting a preset (Preset List) from this list will display it. Video Proile 1 Video Proile 2 Video Proile 3 Full screen mode Taking a Snapshot Record a Video Clip Set a Storage Folder Listen/Stop Audio In (from microphone) Start/Stop Audio Out (to speaker) D-Link DCS-7000L User Manual 24 Section 4: Coniguration Setup Setup Wizard This section allows you to begin setup wizards which will guide you through the process of getting your camera’s various functions conigured. If you comfortable with adjusting the settings manually, you may skip the wizards and adjust the necessary as needed. Internet You may choose to conigure your network by using the Internet Connection Connection Setup Wizard that includes step-by-step instructions. Setup Wizard: Please refer to page "Internet Connection Setup Wizard" on page 26 for more details. Manual If you would rather manually setup the camera internet Internet connection, you can refer to page "Network Setup" on page 31 Connection which provides more details on the information required. Setup: Motion You may choose to conigure motion detection by using the Detection Setup Motion Detection Setup Wizard that includes step-by-step Wizard: instructions. Please refer to page "Motion Detection Setup Wizard" on page 29 for more details. Manual If you would rather manually setup the camera’s motion Motion detection features, you can refer to page "Motion Detection" on Detection page 42 which provides more details on the information required. Setup: D-Link DCS-7000L User Manual 25 Section 4: Coniguration Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to conigure your new D-Link Camera and connect the camera to the Internet. Note that this wizard will not register your camera with mydlink.com. Click Next to continue. Select Automatic IP Address if you want your DHCP server (usually enabled on your router) to assign the camera its IP settings. If you want to manually assign the IP settings, select Static IP Address and enter the following details: IP Address: Enter an IP address for your camera. Subnet Mask: Enter the subnet mask of your network. Default Enter the default gateway address. This is usually the IP address Gateway: of your router. Primary DNS: Enter the primary DNS server’s IP address. This is usually the IP address of your router. Secondary DNS: Enter the secondary DNS server’s IP address. This is optional. If you are required to connect using PPPoE, select Enabled and enter the Username and Password for your PPPoE connection. Only select this option if your camera is directly connected to your broadband modem. If it is on a network with a router or gateway, do not select this option. Click Next to continue. D-Link DCS-7000L User Manual 26 Section 4: Coniguration A Dynamic DNS account allows you to access your camera over the Internet when you have an IP address that changes each time you connect to the Internet. If you have a Dynamic DNS account, click Enable and enter the following details: Enable: Click to enable the DDNS function. The Dynamic Domain Name Server (DDNS) will hold a DNS host name and synchronize the public IP address of the modem when it has been modiied. The username and password are required when using the DDNS service. Server Address: Select your Dynamic DNS Server from the drop down menu. Host Name: Enter the host name of the DDNS server. User Name: Enter your username or e-mail address used to connect to the DDNS. Password: Enter your password used to connect to the DDNS server. Verify Password: Re-enter your password for veriication. Timeout: You can setup how often the camera notiies the DDNS server of its current global IP address by entering a whole number in hours. Click Next to continue. D-Link DCS-7000L User Manual 27 Section 4: Coniguration Create a unique name for your camera. Click Next to continue. Select the time zone that the camera is geographically located in so that scheduled events occur at the correct time. If your time zone observes daylight saving, check the Enable Daylight Saving box. Click Next to continue. A summary of the options you selected is displayed for conirmation. If you are happy with the selected coniguration, click Apply otherwise click Back to make the required changes. D-Link DCS-7000L User Manual 28 Section 4: Coniguration Motion Detection Setup Wizard This wizard will guide you through a step-by-step process to conigure your camera's motion detection functions. Click Next to continue. Step 1 This step will allow you to enable or disable motion detection, specify the detection sensitivity, and adjust the camera’s ability to detect movement. You may specify whether the camera should capture a snapshot or a video clip when motion is detected. Please see "Motion Detection" on page 42 for information about how to conigure motion detection. Step 2 This step allows you to enable motion detection based on a customized schedule. Specify the day and hours. You may also choose to always record whenever motion is detected. D-Link DCS-7000L User Manual 29 Section 4: Coniguration Step 3 This step allows you to specify how you will receive event notiications from your camera. You may choose not to receive notiications, or to receive notiications via e-mail or FTP. Please enter the relevant information for your e-mail or FTP account. Click Next to continue. Step 4 You have completed the Motion Detection Wizard. Please verify your settings and click Apply to save them. Please wait a few moments while the camera saves your settings and restarts. D-Link DCS-7000L User Manual 30 Section 4: Coniguration Network Setup Use this section to conigure the network connections for your camera. All relevant information must be entered accurately. After making any changes, click the Save Settings button to save your changes. DHCP: Select this connection if you have a DHCP server running on your network and would like your camera to obtain an IP address automatically. Static IP You may obtain a static or ixed IP address and other network Address: information from your network administrator for your camera. IP Address: Enter the ixed IP address in this ield. Subnet Mask: This number is used to determine if the destination is in the same subnet. The default value is 255.255.255.0. Default Gateway: The gateway used to forward data to. Primary DNS: The primary domain name server translates names to IP addresses. Secondary DNS: The secondary DNS acts as a backup to the primary. Enable UPnP Enabling this setting allows your camera to be conigured as a Presentation: UPnP device on your network. Enable UPnP Enabling this setting allows the camera to specify a port to Port Forwarding: forward for remote UPnP connections. Forwarding Enter the UPnP port you wish to forward, and click Test to check Port: whether it is available. Forwarding Displays the current UPnP port forwarding status. Status: D-Link DCS-7000L User Manual 31 Section 4: Coniguration Enable PPPoE: Enable this setting if your network uses PPPoE. User Name / Enter the username and password for your PPPoE account. RePassword: enter your password in the Conirm Password ield. You may obtain this information from your ISP. HTTP Port: The default port number is 80. Access Name for The default name is video#.mjpg, where # is the number of the Stream 1~3: stream. HTTPS Port: You may use a PC with a secure browser to connect to the HTTPS port of the camera. The default port number is 443. RTSP Port: The port number that you use for RTSP streaming to mobile devices, such as mobile phones or PDAs. The default port number is 554. You may specify the address of a particular stream. For instance, live1.sdp can be accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents the ip address of your camera. Enable CoS: Enabling the Class of Service setting implements a best-efort policy without making any bandwidth reservations. Enable QoS: Enabling QoS allows you to specify a traic priority policy to ensure a consistent Quality of Service during busy periods. If the DCS-7000L is connected to a router that itself implements QoS, the router's settings will override the QoS settings of the camera. Enable IPv6: Enable the IPv6 setting to use the IPv6 protocol. Enabling the option allows you to manually set up the address, specify an optional IP address, specify an optional router and an optional primary DNS. D-Link DCS-7000L User Manual 32 Section 4: Coniguration Enable Multicast The DCS-7000L allows you to multicast each of the available for stream streams via group address and specify the TTL value for each stream. Enter the port and TTL settings you wish to use if you do not want to use the defaults. Please verify your settings and click Save Settings to commit them. D-Link DCS-7000L User Manual 33 Section 4: Coniguration Wireless Setup This section allows you to set up and conigure the wireless settings on your camera. After making any changes, click the Save Settings button to save your changes. Site Survey: Click the Rescan button to scan for available wireless networks. After scanning, you can use the drop-down box to select an available wireless network. The related information (SSID, Wireless Mode, Channel, Authentication, Encryption) will be automatically illed in for you. SSID: Enter the SSID of the wireless access point you wish to use. Wireless Mode: Use the drop-down box to select the mode of the wireless network you wish to connect to. Infrastructure is normally used to connect to an access point or router. Ad-Hoc is usually used to connect directly to another computer. Channel: If you are using Ad Hoc mode, select the channel of the wireless network you wish to connect to, or select Auto. Authentication: Select the authentication you use on your wireless network Open, Shared, WPA-PSK, or WPA2-PSK. Encryption: If you use WPA-PSK or WPA2-PSK authentication, you will need to specify whether your wireless network uses TKIP or AES encryption. If you use Open or Shared authentication, WEP encryption should be the setting. Key: If you use WEP, WPA-PSK, or WPA2-PSK authentication, enter the Key (also known as password) used for your wireless network. D-Link DCS-7000L User Manual 34 Section 4: Coniguration Dynamic DNS DDNS (Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it has been modiied. A user name and password are required when using the DDNS service. After making any changes, click the Save Settings button to save your changes. Enable DDNS: Select this checkbox to enable the DDNS function. Server Address: Select your Dynamic DNS provider from the pull down menu or enter the server address manually. Host Name: Enter the host name of the DDNS server. User Name: Enter the user name or e-mail used to connect to your DDNS account. Password: Enter the password used to connect to your DDNS server account. Timeout: Enter the DNS timeout values you wish to use. Status: Indicates the connection status, which is automatically determined by the system. D-Link DCS-7000L User Manual 35 Section 4: Coniguration Image Setup In this section, you may conigure the video image settings for your camera. A preview of the image will be shown in Live Video. Enable Privacy The Privacy Mask setting allows you to specify up to 3 rectangular Mask: areas on the camera's image to be blocked/excluded from recordings and snapshots. You may click and drag the mouse cursor over the camera image to draw a mask area. Right clicking on the camera image brings up the following menu options: Disable All: Disables all mask areas Enable All: Enables all mask areas Reset All: Clears all mask areas. Anti Flicker: If the video lickers, try enabling this setting. Mirror: This will mirror the image horizontally. Flip: This will lip the image vertically. When turning Flip on, you may want to consider turning Mirror on as well. Power Line: Select the frequency used by your power lines to avoid interference or distortion. White Balance: Use the drop-down box to change white balance settings to help balance colors for diferent environments. You can choose from Auto, Outdoor, Indoor, Fluorescent, and Push Hold. D-Link DCS-7000L User Manual 36 Section 4: Coniguration Exposure Mode: Changes the exposure mode. Use the drop-down box to set the camera for Indoor, Outdoor, or Night environments, or to Moving to capture moving objects. The Low Noise option will focus on creating a high-quality picture without noise. You can also create 3 diferent custom exposure modes. The Max Gain setting will allow you to control the maximum amount of gain to apply to brighten the picture. Denoise: This setting controls the amount of noise reduction that will be applied to the picture. Brightness: Adjust this setting to compensate for backlit subjects. Contrast: Adjust this setting to alter the color intensity/strength. Saturation: This setting controls the amount of coloration, from grayscale to fully saturated. Sharpness: Specify a value from 0 to 8 to specify how much sharpening to apply to the image. Reset Default: Click this button to reset the image to factory default settings. D-Link DCS-7000L User Manual 37 Section 4: Coniguration Audio and Video You may conigure up to 3 video proiles with diferent settings for your camera. Hence, you may set up diferent proiles for your computer and mobile display. In addition, you may also conigure the two-way audio settings for your camera. After making any changes, click the Save Settings button to save your changes. Number of You can use the drop-down box to set up to 2 active proiles. active proiles: Aspect ratio: Set the aspect ratio of the video to 4:3 standard or 16:9 widescreen. Mode: Set the video codec to be used to JPEG, or H.264. Frame size / Frame size determines the total capture resolution, and View View window window area determines the Live Video viewing window size. If area: the Frame size is larger than the Live Video size, you can use the ePTZ controls to look around. 16:9 1280 x 720, 800 x 448, 640 x 360, 480 x 272, 320 x 176 4:3 960 x 720, 800 x 592, 640 x 480, 480 x 352, 320 x 240 Note: If your View window area is the same as your Frame size, you will not be able to use the ePTZ function. Maximum frame A higher frame rate provides smoother motion for videos, rate: and requires more bandwidth. Lower frame rates will result in stuttering motion, and requires less bandwidth. D-Link DCS-7000L User Manual 38 Section 4: Coniguration Video Quality: This limits the maximum frame rate, which can be combined with the "Fixed quality" option to optimize the bandwidth utilization and video quality. If ixed bandwidth utilization is desired regardless of the video quality, choose "Constant bit rate" and select the desired bandwidth. Constant bit The bps will afect the bit rate of the video recorded by the rate: camera. Higher bit rates result in higher video quality. Fixed quality: Select the image quality level for the camera to try to maintain. High quality levels will result in increased bit rates. Audio in of: Selecting this checkbox will mute incoming audio. Audio in gain This setting controls the amount of gain applied to incoming level: audio to increase its volume. Audio out of: Selecting this checkbox will mute outgoing audio. Audio out This setting controls the amount of gain applied to outgoing volume level: audio to increase its volume. D-Link DCS-7000L User Manual 39 Section 4: Coniguration Preset This screen allows you to set preset points for the ePTZ function of the camera, which allows you to look around the camera's viewable area by using a zoomed view. Presets allow you to quickly go to and view a speciic part of the area your camera is covering, and you can create preset sequences, which will automatically change the camera's view between the diferent presets according to a deined order and timing you can set. Note: If your View window area is the same as your Frame size, you will not be able to use the ePTZ function. Video Proile: This selects which video proile to use. ePTZ Speed: You may select a value between 0 and 64. 0 is the slowest and 64 is the fastest. Arrow Buttons Use these buttons to move to a speciic part of the viewing area, and Home which you can then set as a preset. Click the Home button to Button: return to the center of the viewing area. Input Preset Enter the name of the preset you want to create, then click the Name: Add button to make a new preset. If an existing preset has been selected from the Preset List, you can change its name by typing in a new name, then clicking the Rename button. Preset List: Click this drop-down box to see a list of all the presets that have been created. You can select one, then click the GoTo button to change the displayed camera view to the preset. Clicking the Remove button will delete the currently selected preset. Preset This section allows you to create a preset sequence, which Sequence: automatically moves the camera's view between a set of preset views. D-Link DCS-7000L User Manual 40 Section 4: Coniguration Preset List: To add a preset to the sequence, select it from the drop-down box at the bottom of this window, set the Dwell time to determine how long the camera view will stay at that preset, then click the Add button. The preset name will appear in the list, followed by the dwell time to view that preset for. You can rearrange your presets in the sequence by selecting a preset in the sequence, then clicking the arrow buttons to move it higher or lower in the current sequence. Clicking the trash can button will remove the currently selected preset from the sequence. If you want to change the dwell time for a preset, select it from the list, enter a new dwell time, then click the Update button. D-Link DCS-7000L User Manual 41 Section 4: Coniguration Motion Detection Enabling Video Motion will allow your camera to use the motion detection feature. You may deine a motion area that will be used for monitoring. After making any changes, click the Save Settings button to save your changes. Enable Video Select this box to enable the motion detection feature of your Motion: camera. Sensitivity: Speciies the measurable diference between two sequential images that would indicate motion. Please enter a value between 0 and 100. Percentage: Speciies the amount of motion in the window being monitored that is required to initiate an alert. If this is set to 100%, motion is detected within the whole window will trigger a snapshot. Draw Motion Draw the motion detection area by dragging your mouse in the Area: window (indicated by the red square). Erase Motion To erase a motion detection area, simply click on the red square Area: that you wish to remove. Right clicking on the camera image brings up the following menu options: Select All: Draws a motion detection area over the entire screen. Clear All: Clears any motion detection areas that have been drawn. Restore: Restores the previously speciied motion detection areas. D-Link DCS-7000L User Manual 42 Section 4: Coniguration Sound Detection Enabling Sound Detection will allow your camera to use the built-in microphone to trigger events with audio. If this option is selected, the trigger by option under SD recording, Video Clip, or Snapshot should also be selected. After making any changes, click the Save Settings button to save your changes. Enable Sound Check this box to enable the motion detection feature of your Detection: camera. Detection Level: Speciies the measurable level that would indicate sound. Please enter a value between 50 and 90, the higher the number the more sensitive the camera will be to sound. D-Link DCS-7000L User Manual 43 Section 4: Coniguration Time and Date This section allows you to automatically or manually conigure, update, and maintain the internal system clock for your camera. After making any changes, click the Save Settings button to save your changes. Time Zone: Select your time zone from the drop-down menu. Enable Daylight Select this to enable Daylight Saving Time. Saving: Auto Daylight Select this option to allow your camera to conigure the Daylight Saving: Saving settings automatically. Set Date and Selecting this option allows you to conigure the Daylight Saving Time Manually: date and time manually. Ofset: Sets the amount of time to be added or removed when Daylight Saving is enabled. Synchronize Enable this feature to obtain time automatically from an NTP with NTP Server: server. NTP Server: Network Time Protocol (NTP) synchronizes the DCS-7000L with an Internet time server. Choose the one that is closest to your location. Set the Date and This option allows you to set the time and date manually. Time Manually: Copy Your This will synchronize the time information from your PC. Computer's Time Settings: D-Link DCS-7000L User Manual 44 Section 4: Coniguration Event Setup In a typical application, when motion is detected, the DCS-7000L sends images to a FTP server or via e-mail as notiications. As shown in the illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is triggered, a speciied action will be performed. You can conigure the DCS-7000L to send snapshots or videos to your e-mail address or FTP site. Action Event Condition ex. Motion detection, Periodically, Digital input, System reboot Media Server (what to send) (where to send) ex. Snapshot, Video Clips ex. Email, FTP To start plotting an event, it is suggested to conigure server and media columns irst so that the DCS-7000L will know what action shall be performed when a trigger is activated. D-Link DCS-7000L User Manual 45 Section 4: Coniguration The Event Setup page includes 4 diferent sections. • Server • Media • Event • Recording 1. To add a new item - "server, media, or event," click Add. A screen will appear and allow you to update the ields accordingly. 2. To delete the selected item from the pull-down menu of event, server or media, click Delete. 3. Click on the item name to pop up a window for modifying. D-Link DCS-7000L User Manual 46 Section 4: Coniguration Add Server You can conigure up to 5 servers to save snapshots and/or video to. After making any changes, click the Save Settings button to save your changes. Server Name: Enter the unique name of your server. E-mail: Enter the coniguration for the target e-mail server account. FTP: Enter the coniguration for the target FTP server account. Network Specify a network storage device. Only one network storage Storage: device is supported. SD Card: Use the camera's onboard SD card storage. D-Link DCS-7000L User Manual 47 Section 4: Coniguration Add Media There are three types of media, Snapshot, Video Clip, and System Log. After making any changes, click the Save Settings button to save your changes. Media Name: Enter a unique name for media type you want to create. Snapshot: Select this option to set the media type to snapshots. Source: Set the video proile to use as the media source. Refer to Audio and Video on "Audio and Video" on page 38 for more information on video proiles. Send pre-event Set the number of pre-event images to take. Pre-event images image(s) [0~3]: are images taken before the main event snapshot is taken. Send post-event Set the number of post-event images to take. Post-event images image(s) [0~7]: are images taken after the main event snapshot is taken. You can set up to 7 post-event images to be taken. File name preix: The preix name will be added on the ile name. Add date and Check it to add timing information as ile name suix. time suix to ile name: Video clip: Select this option to set the media type to video clips. Source: Set the video proile to use as the media source. Refer to "Audio and Video" on page 51 for more information on video proiles. Pre-event This sets how many seconds to record before the main event recording: video clip starts. You can record up to 3 seconds of pre-event video. D-Link DCS-7000L User Manual 48 Section 4: Coniguration Maximum Set the maximum length of video to record for your video clips. duration: Maximum ile Set the maximum ile size to record for your video clips. size: File name preix: This is the preix that will be added to the ilename of saved video clips. System log: Select this option to set the media type to system logs. This will save the event to the camera system log, but will not record any snapshots or video. D-Link DCS-7000L User Manual 49 Section 4: Coniguration Add Event Create and schedule up to 2 events with their own settings here. After making any changes, click the Save Settings button to save your changes. Event name: Enter a name for the event. Enable this Select this box to activate this event. event: Priority: Set the priority for this event. The event with higher priority will be executed irst. Delay: Select the delay time before checking the next event. It is being used for both events of motion detection and digital input trigger. Video Motion Motion is detected during live video monitoring. Select the Detection: windows that need to be monitored. Periodic: The event is triggered in speciied intervals. The trigger interval unit is in minutes. System Boot: Triggers an event when the system boots up. Network Lost: Triggers an event when the network connection is lost. Sound Triggers an event when sound is detected. Detection: Schedule: This option allows you to schedule the event manually. D-Link DCS-7000L User Manual 50 Section 4: Coniguration Add Recording Here you can conigure and schedule the recording settings. After making any changes, click the Save Settings button to save your changes. Recording entry The unique name of the entry. name: Enable this Select this to enable the recording function. recording: Priority: Set the priority for this entry. The entry with a higher priority value will be executed irst. Source: The source of the stream. Recording Scheduling the recording entry. schedule: Recording Coniguring the setting for the recording. settings: Destination: Select the folder where the recording ile will be stored. Total cycling Input a value between 200 MB and 2000000 MB (2 TB) for the recording size: space allocated to recording. New recordings will replace the oldest recording when the total recording size exceeds this value. Size of each ile If this is selected, iles will be separated based on the ile size you for recording: specify. Time of each ile If this is selected, iles will be separated based on the maximum for recording: length you specify. File Name Preix: The preix name will be added on the ile name of the recording ile(s). D-Link DCS-7000L User Manual 51 Section 4: Coniguration SD Card Here you may browse and manage the recorded iles which are stored on the SD card. Format SD Card: Click this icon to automatically format the SD card and create "picture" & "video" folders. View Recorded If the picture iles are stored on the SD card, click on the picture Picture: folder and choose the picture ile you would like to view. Playback If video iles are stored on the SD card, click on the video folder Recorded Video: and choose the video ile you would like to view. Refresh: Reloads the ile and folder information from the SD card. D-Link DCS-7000L User Manual 52 Section 4: Coniguration Advanced ICR and IR Here you can conigure the ICR and IR settings. An IR(Infrared) Cut-Removable (ICR) ilter can be disengaged for increased sensitivity in low light environments. Automatic: The Day/Night mode is set automatically. Generally, the camera uses Day mode and switches to Night mode when needed. Day Mode: Day mode enables the IR Cut Filter. Night Mode: Night mode disables the IR Cut Filter. Schedule Mode: Set up the Day/Night mode using a schedule. The camera will enter Day mode at the starting time and return to Night mode at the ending time. IR Light Control: The camera can enable or disable the IR (infrared) light according to your preferences. This setting provides additional controls depending on your speciic application. Of: The IR light will always be of. On: The IR light will always be on. Sync: The IR light will turn on when the ICR sensor is on. Schedule: The IR light will turn on or of according to the schedule that you specify below. D-Link DCS-7000L User Manual 53 Section 4: Coniguration HTTPS This page allows you to install and activate an HTTPS certiicate for secure access to your camera. After making any changes, click the Save Settings button to save your changes. Enable Enable the HTTPS service. HTTPS Secure Connection: Create Choose the way the certiicate should be created. Three options Certiicate are available: Method: Create a self-signed certiicate automatically Create a self-signed certiicate manually Create a certiicate request and install Status: Displays the status of the certiicate. Note: The certiicate cannot be removed while the HTTPS is still enabled. To remove the certiicate, you must irst uncheck Enable HTTPS secure connection. D-Link DCS-7000L User Manual 54 Section 4: Coniguration Access List Here you can set access permissions for users to view your DCS-7000L. Allow list: The list of IP addresses that have the access right to the camera. Start IP address: The starting IP Address of the devices (such as a computer) that have permission to access the video of the camera. Click Add to save the changes made. Note: A total of seven lists can be conigured for both columns. End IP address: The ending IP Address of the devices (such as a computer) that have permission to access the video of the camera. Delete allow list: Remove the customized setting from the Allow List. Deny list: The list of IP addresses that have no access rights to the camera. Delete deny list: Remove the customized setting from the Delete List. For example: When the range of the Allowed List is set from 1.1.1.0 to 192.255.255.255 and the range of the Denied List is set from 1.1.1.0 to 170.255.255.255. Only users with IPs located between 171.0.0.0 and 192.255.255.255 can access the DCS-7000L. D-Link DCS-7000L User Manual Alowed List Denied List 55 Section 4: Coniguration Maintenance Device Management You may modify the name and administrator’s password of your camera, as well as add and manage the user accounts for accessing the camera. You may also use this section to create a unique name and conigure the OSD settings for your camera. Admin Password Set a new password for the administrator’s account. Setting: Add User Account: Add new user account. User Name: The user name for the new account. Password: The password for the new account. User List: All the existing user accounts will be displayed here. Camera Name: Create a unique name for your camera that will be added to the ile name preix when creating a snapshot or a video clip. Enable OSD: Select this option to enable the On-Screen Display feature for your camera. Label: Enter a label for the camera, which will be shown on the OSD when it is enabled. Show Time: Select this option to enable the time-stamp display on the video screen. LED: You may specify whether or not to illuminate the status LED on the camera. D-Link DCS-7000L User Manual 56 Section 4: Coniguration System In this section, you may backup, restore and reset the camera coniguration, or reboot the camera. Save To Local You may save your current camera coniguration as a ile on your Hard Drive: computer. Load From Local Locate a pre-saved coniguration by clicking Browse and then Hard Drive: restore the pre-deined settings to your camera by clicking Load Coniguration. Restore to You may reset your camera and restore the factory settings by Factory Defaults: clicking Restore Factory Defaults. Reboot Device: This will restart your camera. D-Link DCS-7000L User Manual 57 Section 4: Coniguration Firmware Upgrade The camera's current irmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available irmware version. To upgrade the irmware on your DCS-7000L, please download and save the latest irmware version from the D-Link Support Page to your local hard drive. Locate the ile on your local hard drive by clicking the Browse button. Select the ile and click the Upload button to start upgrading the irmware. Current Displays the detected irmware version. Firmware Version: Current Product Displays the camera model name. Name: File Path: Locate the ile (upgraded irmware) on your hard drive by clicking Browse. Upload: Uploads the new irmware to your camera. D-Link DCS-7000L User Manual 58 Section 4: Coniguration Status Device Info This page displays detailed information about your device and network connection. D-Link DCS-7000L User Manual 59 Section 4: Coniguration Logs This page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information. D-Link DCS-7000L User Manual 60 Section 4: Coniguration Help This page provides helpful information about using and coniguring your camera. D-Link DCS-7000L User Manual 61 Appendix B: Technical Speciications Technical Speciications Camera Network Camera Hardware Proile Image Features Conigurable image size, quality, frame rate, and bit rate Time stamp and text overlays Conigurable motion detection windows Conigurable privacy mask zones Conigurable shutter speed, brightness, saturation, contrast, sharpness Video Compression Simultaneous H.264 / MJPEG format compression H.264 multicast streaming JPEG for still images Video Resolution 800x448,640x360, 480x272, 320x176 up to 30 16:9 - 1280x720, fps recording1 800x592, 640x480, 480x352, 320x240 up to 30 fps 4:3 -960x720, recording1 Audio Compression AAC G.711 External Device Interface 10/100 BASE-TX Fast Ethernet port IEEE 802.11a/b/g/n/ac 2.4 GHz, 5 GHz dual-band wireless microSD card slot Network Protocols Security Administrator and user group protection Password authentication D-Link DCS-7000L User Manual 1/4” Megapixel progressive CMOS sensor 8 meter IR illumination distance Minimum illumination 0 Lux with IR LED on Built-in Infrared-Cut Removable (ICR) ilter module Built-in Audio in / Audio out Minimum object distance: 200 mm 10x digital zoom IPv6 IPv4 TCP/IP UDP ICMP DHCP client NTP client (D-Link) DNS client DDNS client (D-Link) SMTP client FTP client HTTP / HTTPS Fixed length 2.4 mm Aperture f/2.0 Angle of view: (H) 98° (V) 52° (D) 115° Samba client PPPoE UPnP port forwarding RTP / RTSP/ RTCP IP iltering QoS CoS Multicast IGMP SNMP (Phase II) ONVIF compliant HTTP and RTSP digest authentication 62 Appendix B: Technical Speciications System System Management Requirements for Web Interface Operating System: Microsoft Windows® 8/7/Vista/XP, or Mac with OS X 10.6 or higher Browser: Internet Explorer 7, Firefox 12, Safari 6, or Chrome version 20 or higher with Java installed and enabled Event Management Motion detection Event notiication and uploading of snapshots/video clips via email or FTP Supports multiple SMTP and FTP servers Multiple event notiications Remote Management Take snapshots/video clips and save to local hard drive via web browser Coniguration interface accessible via web browser Mobile Support mydlink Lite/mydlink+ mobile app for iPhone, iPad, and Android mobile devices D-ViewCam™ System Operating System: Microsoft Windows 8/7/Vista/XP Requirements Web Browser: Internet Explorer 7 or higher General D-ViewCam™ Software Functions Remote management/control of up to 32 cameras Viewing of up to 32 cameras on one screen Weight 115 grams External Power Adaptor Input: 100 to 240 V AC, 50/60 Hz Protocol: Standard TCP/IP Supports all management functions provided in web interface Scheduled motion triggered, or manual recording options Output: 5 V DC, 1.2 A, 50/60 Hz Power Consumption 3.5 watts Temperature Operating: 0 to 40 °C (32 to 104 °F) Storage: -20 to 70 °C (-4 to 158 °F) Humidity Operating: 20% to 80% non-condensing Storage: 5% to 95% non-condensing Certiications CE CE LVD FCC C-Tick 93 56 Dimensions Frame rates when streaming video may vary depending on network conditions and method used. An SD / SDHC card of Class 6 or above is recommended. Supports card capacities up to 32 GB. D-Link DCS-7000L User Manual 63 FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance." For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment. This device meets all the other requirements specified in Part 15E, Section 15.407of the FCC Rules. Canada Notices Industry Canada regulatory information This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The user is cautioned that this device should be used only as specified within this manual to meet RF exposure requirements. Use of this device in a manner inconsistent with this manual could lead to excessive RF exposure conditions. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance." Cet équipement doit être installé et utilisé conformément aux instructions fournies et de l'antenne (s) utilisé pour cet émetteur doit être installé pour fournir une distance de séparation d'au moins 20 cm de toute personne et ne doit pas être co-localisés ou fonctionnant en conjonction avec une autre antenne ou transmetteur. Les utilisateurs finaux et installateurs doivent être fournir des instructions d'installation de l'antenne et des conditions de fonctionnement du transmetteur de la conformité sur l'exposition aux RF CAUTION: The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; Avertissement: Les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract Create Date : 2014:05:05 16:06:45+08:00 Creator : Adobe InDesign CC (Windows) Modify Date : 2014:10:07 13:27:45+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2014:10:07 13:27:45+08:00 Creator Tool : Adobe InDesign CC (Windows) Instance ID : uuid:931d2a1a-c705-4808-a2ba-69dbaa30d550 Original Document ID : xmp.did:8707E6135805E311868BCC6AB186A7B3 Document ID : xmp.id:074cad16-9de2-444b-800a-1a35faa5276c Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:7b719dae-a6e0-f948-8801-64c2bbd064c6 Derived From Document ID : xmp.did:88d1788a-efec-594c-b577-3da9683f671b Derived From Original Document ID: xmp.did:8707E6135805E311868BCC6AB186A7B3 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC (Windows) History Changed : / History When : 2014:05:05 16:06:45+08:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Layout : SinglePage Page Count : 65EXIF Metadata provided by EXIF.tools