D Link DGL4500A2 Xtreme N GAMING ROUTER User Manual manual

D Link Corporation Xtreme N GAMING ROUTER manual

manual

1D-Link DGL-4500 User ManualSection 1 - Product OverviewProduct OverviewNote: Using a power supply with a different voltage rating than the one included with the DGL-4500 will cause damage and void the warranty for this product.D-Link DGL-4500 Gaming RouterPower AdapterEthernet CableCD-ROMStandPackage Contents
2D-Link DGL-4500 User ManualSection 1 - Product OverviewNetwork Requirements• An Ethernet-based Cable or DSL modem• IEEE 802.11n-draft/g/a wireless clients• 10/100/1000 EthernetWeb-based Configuration Utility RequirementsComputer with the following:• Windows®, Macintosh, or Linux-based operating system • An installed Ethernet adapterBrowser Requirements:• Internet Explorer 6.0 or higher• Firefox 3.0 or higher• Safari 3.0 or higher Windows® Users: Make sure you have the latest version of Java installed. Visit  www.java.com to download the latest version.CD Installation Wizard RequirementsComputer with the following:• Windows® XP with Service Pack 2 or Vista®• An installed Ethernet adapter• CD-ROM driveSystem Requirements
3D-Link DGL-4500 User ManualSection 1 - Product OverviewIntroductionTOTAL PERFORMANCECombines award winning router features and IEEE 802.11a/Draft 802.11n wireless technology to provide the best wireless performanceTOTAL SECURITYThe most complete set of security features including Active Firewall and WPA/WPA2 to protect your network against outside intrudersTOTAL COVERAGEProvides greater wireless signal rates even at farther distances for best-in-class Whole Home Coverage.ULTIMATE PERFORMANCEThe D-Link Xtreme N™ Gaming Router (DGL-4500) is a draft 802.11n/802.11a compliant device that delivers real world performance of up to 14x faster than an 802.11g wireless connection (also faster than a 100Mbps wired Ethernet connection). Create  a secure wireless network  to share photos, files, music, video, printers, and network storage throughout your home. Connect the Xtreme N™ Gaming Router to a cable or DSL modem and share your high-speed Internet access with everyone on the network. In addition, this Router includes GameFuel engine that keeps online gaming smooth and responsive, providing a better Internet experience.EXTENDED WHOLE HOME COVERAGEPowered by Xtreme  N™  technology, this  high performance  router  provides superior Whole Home  Coverage while reducing dead spots. The Xtreme N™ Gaming Router is designed for use in bigger homes and for users who demand higher performance networking. Add a Xtreme N™ notebook or desktop adapter and stay connected to your network from virtually anywhere in your home.TOTAL NETWORK SECURITYThe Xtreme N™ Gaming Router supports all of the latest wireless security features to prevent unauthorized access, be it from over the wireless network or from the Internet. Support for WPA and WPA2 standards ensure that you’ll be able to use the best possible encryption method, regardless of your client devices. In addition, this Xtreme N™ Gaming Router utilizes dual active firewalls (SPI and NAT) to prevent potential attacks from across the Internet.* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g and Draft 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.
4D-Link DGL-4500 User ManualSection 1 - Product Overview• Faster Wireless Networking - The DGL-4500 provides up to 300Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. The performance of this 802.11n wireless router gives you the freedom of wireless networking at speeds 14x faster than 802.11g.• Compatible with 802.11a and 802.11g Devices - The DGL-4500 is still fully compatible with the IEEE 802.11a/g standard, so it can connect with existing 802.11a/g PCI, USB and Cardbus adapters.• OLED Display - The OLED display screen provides information regarding the router.• Advanced Firewall Features - The Web-based user interface displays a number of advanced network management features including: • Content  Filtering - Easily applied  content  filtering based on  MAC Address, URL, and/or Domain Name.• Filter Scheduling - These  filters  can  be  scheduled  to  be  active on  certain days or for  a duration of hours or minutes.• Secure Multiple/Concurrent Sessions - The DGL-4500 can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DGL-4500 can securely access corporate networks.• User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DGL-4500 lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company’s server. Configure your router to your specific settings within minutes.* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, and Draft 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.Features
5D-Link DGL-4500 User ManualSection 1 - Product OverviewHardware OverviewConnectionsUSB Connect a USB 1.1 or 2.0 flash drive to  configure  the  wireless  settings using WCN and SharePort.Reset Pressing the Reset button restores the router to its original factory default settings.Gigabit LAN Ports (1-4) Connect  Ethernet  devices such  as computers, switches, and hubs.Internet Port The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem.Power ReceptorReceptor for the  supplied  power adapter.
6D-Link DGL-4500 User ManualSection 1 - Product OverviewHardware OverviewLEDsOLED ScreenDisplays  information regarding  the  router (see next page).WPS LED (side of unit)A  solid  light  indicates  a successful WPS  connection. A  blinking  light  indicates  the device is trying to establish a connection.Power LED A  solid  light  indicates  a proper  connection  to  the power supply.
7D-Link DGL-4500 User ManualSection 1 - Product OverviewHardware OverviewOLED ScreenOLED Screen23 4 6511 WAN Displays Internet connectivity.2 Menu Select to display the OLED main menu.3 Performance Select to display the data of the LAN, WAN, and wireless connections.4 WPS Displays the WPS status.5 Date/Time Displays the routers date and time.6 Status Displays the device status.
8D-Link DGL-4500 User ManualSection 2 - InstallationBefore you BeginThis section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. •  Please configure the router with the computer that was last connected directly to your modem.  •  You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet). •  If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.•  When running the Setup Wizard from the D-Link CD, make sure the computer you are running the CD from is connected to the Internet and online or the wizard will not work. If you have disconnected any hardware, re-connect your computer back to the modem and make sure you are online.Installation
9D-Link DGL-4500 User ManualSection 2 - InstallationWireless Installation ConsiderationsThe D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.2. Be  aware  of  the  direct  line  between  network  devices.  A  wall  that  is  1.5  feet  thick  (.5  meters),  at  a   45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.4. Keep  your product away (at  least  3-6  feet  or 1-2  meters)  from  electrical  devices  or  appliances that generate RF noise.5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
10D-Link DGL-4500 User ManualSection 2 - InstallationNetwork Diagram
11D-Link DGL-4500 User ManualSection 2 - InstallationIf you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:1.  Place the router in an open and central location. Do not plug the power adapter into the router.2.  Turn the power off on your modem. If there is no on/off switch, then unplug the modem’s power adapter. Shut down your computer.3.  Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the Internet port on the router.4.  Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port on your computer.5.  Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).6.  Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the router to boot.7.  Turn on your computer.8.  Refer to page 15 to configure your router.Connect to Cable/DSL/Satellite Modem
12D-Link DGL-4500 User ManualSection 2 - InstallationIf you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have to do the following before connecting the router to your network:• Disable UPnP™• Disable DHCP• Change the LAN IP address to an available address on your network. The LAN ports on the router cannot accept a DHCP address from your other router.To connect to another router, please follow the steps below:1.  Plug the power into the router. Connect one of your computers to the router (LAN port) using an Ethernet cable. Make sure your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the Networking Basics section for more information. If you need to change the settings, write down your existing settings before making any changes. In most cases, your computer should be set to receive an IP address automatically in which case you will not have to do anything to your computer.2.  Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user name to Admin and leave the password box empty. Click Log In to continue.3.  Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settings to continue. 4.  Click Setup and then click Network Settings. Uncheck the Enable DHCP Server checkbox. Click Save Settings to continue.5.  Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save Settings to save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the browser and change your computer’s IP settings back to the original values as in Step 1.Connect to Another Router
13D-Link DGL-4500 User ManualSection 2 - Installation6.  Disconnect the Ethernet cable from the router and reconnect your computer to your network. 7.  Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug anything into the Internet port of the D-Link router. 8.  You may now use the other 3 LAN ports to connect other Ethernet devices and computers. To configure your wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and Wireless Security sections for more information on setting up your wireless network.
14D-Link DGL-4500 User ManualSection 2 - InstallationThe DGL-4500 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. You may manually configure your router without the wizard. Refer to the next page to manually setup your router.Insert the Quick Router Setup Wizard CD in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows® XP. The steps and screens are similar for the other Windows® operating systems.If the CD autorun function does not automatically start on your computer, go to Start > Run. In the run box type “D:\DGL4500.exe” (where D: represents the drive letter of your CD-ROM drive).When the autorun screen appears, click BEGIN INSTALL and follow the on-screen instructions. Getting Started
15D-Link DGL-4500 User ManualSection 3 - ConfigurationConfigurationThis  section  will  show  you  how  to  configure  your  new  D-Link  wireless  router  using  the  web-based  configuration utility.Web-based Configuration UtilityTo access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1).You may also enter the NetBIOS name (“dlinkrouter”) to access the router. Enter http://dlinkrouter and press Enter. Select Admin from the drop-down menu and then enter your password. Leave the password blank by default.Type in the graphical authentication code (if you cannot read it, click Regenerate).If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.
16D-Link DGL-4500 User ManualSection 3 - ConfigurationSetup WizardYou may click Setup Wizard to quickly configure your router.If you want to enter your settings without running the wizard, click on Internet on the left side and then click Manual Configure and skip to page 20.Click Launch Internet Connection Setup Wizard to begin.If you want to configure your wireless settings, click Launch Wireless Security Setup Wizard and skip to page 67.Click Next to continue.
17D-Link DGL-4500 User ManualSection 3 - ConfigurationCreate a new password and then click Next to continue.Select your time zone from the drop-down menu and then click Next to continue.Select your ISP from the drop-down menu or select the type of Internet connection you use and then click Next to continue.
18D-Link DGL-4500 User ManualSection 3 - ConfigurationIf you selected Dynamic, you may need to enter the MAC address of the computer that was last connected directly to your modem. If you are currently using that computer, click Clone Your PC’s MAC Address and then click Next to continue.The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed.If you selected PPPoE, enter your PPPoE username and password. Click Next to continue.Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.If you selected PPTP, enter your PPTP username and password. Click Next to continue.
19D-Link DGL-4500 User ManualSection 3 - ConfigurationIf you selected L2TP, enter your L2TP username and password. Click Next to continue.If you selected Static, enter your network settings supplied by your Internet provider. Click Next to continue.Click Connect to save your settings. Once the router is finished rebooting, click Continue. Please allow 1-2 minutes to connect. Close your browser window and reopen it to test your Internet connection. It may take a few tries to initially connect to the Internet.
20D-Link DGL-4500 User ManualSection 3 - ConfigurationSelect Dynamic IP (DHCP) to obtain IP Address information  automatically  from  your  ISP.  Select this option  if your ISP does  not  give you any IP numbers to use. This option is commonly used for Cable modem services.Advanced Domanin Name System (DNS) services enhances your internet performance by getting you the information and web pages you are looking for faster and more reliably. Additionally, it improves your overall Internet experience by correcting many common typo mistakes automatically, taking you where you intended to go and saving you valuable time. Disclaimer: D-Link makes no warranty as to the availability, reliability, functionality and operation of the Advanced DNS service of its features. The Host Name is optional but may  be  required by some ISPs. Check the box if you are having problems obtaining an IP address from your ISP.Enter the Primary DNS server IP address assigned by your ISP.Maximum Transmission  Unit  -  you  may  need  to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU.My Internet Connection:Host Name:Manual ConfigurationDynamic (Cable)DNS Addresses:MTU:Use Unicasting:Enable Advanced DNS Service:
21D-Link DGL-4500 User ManualSection 3 - ConfigurationThe default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP.  You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.MAC Address:
22D-Link DGL-4500 User ManualSection 3 - ConfigurationSelect PPPoE (Username/Password) from the drop-down menu.Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.Enter the IP address (Static PPPoE only).Enter your PPPoE user name.Enter your PPPoE password and then retype the password in the next box.Enter the ISP Service Name (optional).Select either Always-on, On-Demand, or Manual.Enter the Primary and Secondary DNS Server Addresses (On-Demand only).Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP.  You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.My Internet Connection:Address Mode:IP Address:User Name:Password:Service Name:Reconnection Mode:Maximum Idle Time:DNS Addresses:MTU:MAC Address:Internet SetupPPPoE (DSL)Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.
23D-Link DGL-4500 User ManualSection 3 - ConfigurationSelect  Static  if  your  ISP  assigned  you the  IP  address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.Enter the IP address (Static PPTP only).Enter the Primary and Secondary DNS Server Addresses (Static PPTP only).Enter the Gateway IP Address provided by your ISP.Enter the Server IP provided by your ISP (optional).Enter your PPTP username.Enter your PPTP password and then retype the password in the next box.Select either Always-on, On-Demand, or Manual.Enter  a  maximum  idle  time  during  which  the  Internet connection is maintained during inactivity. To disable this feature, enable Always-on.The DNS server information will be supplied by your ISP (Internet Service Provider.)Address Mode:PPTP IP Address:PPTP Subnet Mask:PPTP Gateway:PPTP Server IP:Internet SetupPPTPChoose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Username:Password: Reconnect Mode:Maximum Idle Time:DNS Servers:
24D-Link DGL-4500 User ManualSection 3 - ConfigurationMaximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP.  You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.MTU:MAC Address:
25D-Link DGL-4500 User ManualSection 3 - ConfigurationSelect  Static  if  your  ISP  assigned  you  the  IP  address, subnet  mask,  gateway,  and  DNS  server  addresses.  In most cases, select Dynamic.Enter the L2TP IP address supplied by your ISP (Static only).Enter  the  Subnet  Mask  supplied  by  your  ISP  (Static only).Enter the Gateway IP Address provided by your ISP.Enter the Server IP provided by your ISP (optional).Enter your L2TP username.Enter your L2TP password and then retype the password in the next box.Select either Always-on, On-Demand, or Manual.Enter  a  maximum  idle  time  during  which  the  Internet connection is maintained during inactivity. To disable this feature, enable Always-on.Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).Address Mode:L2TP IP Address:L2TP Subnet Mask:L2TP Gateway:L2TP Server IP:Username:Password:Reconnect Mode:Maximum Idle Time: DNS Servers:Internet SetupL2TPChoose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services.
26D-Link DGL-4500 User ManualSection 3 - ConfigurationMTU:Clone MAC Address:Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP.  You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
27D-Link DGL-4500 User ManualSection 3 - ConfigurationEnter the IP address assigned by your ISP.Enter the Subnet Mask assigned by your ISP.Enter the Gateway assigned by your ISP.The DNS server information will be supplied by your ISP (Internet Service Provider.)Maximum Transmission  Unit  -  you  may  need  to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP.  You can use the  Clone Your  PC’s  MAC Address button to  replace the Internet  port’s  MAC address with the MAC address of your Ethernet card.IP Address:Subnet Mask:Default Gateway:DNS Servers:MTU:MAC Address:Internet SetupStatic (assigned by ISP)Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
28D-Link DGL-4500 User ManualSection 3 - ConfigurationCheck the box to  enable the wireless function.  If  you do not want to use wireless, uncheck the box to disable all the wireless functions. Click New Schedule to create your own time schedule to enable the wireless function. Service Set Identifier (SSID) is the name of your wireless network.  Create  a  name  using  up  to  32  characters. The SSID is case-sensitive.Select 2.4GHz if you want to use the 2.4GHz band or 5GHz band if you want to use the 5GHz band. 2.4GHz:Select one of the following:802.11g Only - Select if all of your wireless clients are 802.11g.Mixed 802.11g and 802.11b - Select if you are using both 802.11b and 802.11g wireless clients.802.11b Only - Select if all of your wireless clients are 802.11b.802.11n Only - Select only if all of your wireless clients are 802.11n.Mixed 802.11n, 802.11b, and 802.11g - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.Mixed 802.11n and 802.11g - Select if you are using a mix of 802.11n and 802.11g wireless clients.5GHz:Select one of the following:802.11a Only - Select if all of your wireless clients are 802.11a.802.11n Only - Select only if all of your wireless clients are 802.11n.802.11n  and  802.11a  -  Select  if  you  are  using  both 802.11b and 802.11g wireless clients.Enable Wireless:Wireless SettingsWireless Network Name:802.11 Mode:802.11 Band:

Navigation menu