D Link DI524E1 IEEE802.11g Wireless Router User Manual DI 524 manual indd

Download:
Mirror Download [FCC.gov]
Document ID	591025
Application ID	qHZ+WeT3nrcW9GoWKsbHcw==
Document Description	Users Manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	204.37kB (2554667 bits)
Date Submitted	2005-10-12 00:00:00
Date Available	2005-10-12 00:00:00
Creation Date	2005-10-12 12:07:38
Producing Software	Adobe PDF Library 6.0
Document Lastmod	2005-10-12 12:13:38
Document Title	DI-524_manual.indd
Document Creator	Adobe InDesign CS (3.0)

Using the Configuration Menu (continued)
Tools> Admin
At this page, the DI-524 administrator can change the system password. There are two
accounts that can access the Broadband Router’s Web-Management interface. They
are admin and user. Admin has read/write access while user has read-only access.
User can only view the settings but cannot make any changes.
Administrator-
admin is the Administrator login name
PasswordUser-
Enter the password and enter again to confirm
user is the User login name
Password-
Enter the password and enter again to confirm
Remote Management- Remote management allows the DI-524 to be configured
from the Internet by a web browser. A username and password is still required to access the Web-Management interface. In general, only a member of your network can
browse the built-in web pages to perform Administrator tasks. This feature enables
you to perform Administrator tasks from the remote (Internet) host.
IP Address- The Internet IP address of the computer that has access to the Broad-
band Router. If you input an asterisk (*) into this field, then any computer will be able
to access the Router. Putting an asterisk (*) into this field would present a security risk
and is not recommended.
Port- The port number used to access the Broadband Router.
Example- http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the Broadband
Router and 8080 is the port used for the Web-Mangement interface.
31
Using the Configuration Menu (continued)
Tools > Time
Default
NTP Server-
NTP is short for Network Time Protocol. NTP synchronizes
computer clock times in a network of computers.
This field is optional.
Time Zone-
Set Device Date and Time: To manually input the time. Enter
the values in these fields for the Year, Month, Day, Hour,
Minute, and Second.
Set the Time-
To manually input the time, enter the values in these fields for the
Year, Month, Day, Hour, Minute, and Second. Click Set Time.
Daylight
Saving-
To select Daylight Saving time manually, select enabled or
disabled, and enter a start date and an end date for daylight
saving time.
32
Using the Configuration Menu (continued)
Tools > System
The current system settings can be saved as a file onto the local hard drive. The saved
file or any other saved setting file can be loaded back on the Broadband Router. To
reload a system settings file, click on Browse to browse the local hard drive and locate
the system file to be used. You may also reset the Broadband Router back to factory
settings by clicking on Restore.
Save Settings to
Local Hard Drive-
Click Save to save the current settings to the local Hard Drive
Load Settings from
Local Hard Drive- Click Browse to find the settings, then click Load
Restore to Factory
Default SettingsClick Restore to restore the factory default settings
33
Using the Configuration Menu (continued)
Tools > Firmware
You can upgrade the firmware of the Router here. Make sure the firmware you want
to use is on the local hard drive of the computer. Click on Browse to browse the local
hard drive and locate the firmware to be used for the update. Please check the D-Link
support site for firmware updates at http://support.dlink.com. You can download firmware
upgrades to your hard drive from the D-Link support site.
Firmware Upgrade- Click on the link in this screen to find out if there is an up-
dated firmware; if so, download the new firmware to your hard
Browse-
After you have downloaded the new firmware, click Browse in
this window to locate the firmware update on your hard drive.
Click Apply to complete the firmware upgrade.
34
Using the Configuration Menu (continued)
Tools > Misc
Ping Test-
The Ping Test is used to send Ping packets to test if a computer is on the
Internet. Enter the IP Address that you wish to Ping, and click Ping
Restart
Device-
Click Reboot to restart the DI-524
Block
WAN
Ping-
If you choose to block WAN Ping, the WAN IP Address of the DI-524
will not respond to pings. Blocking the Ping may provide some extra
security from hackers.
Discard Ping from WAN sideClick Enabled to block the WAN ping
UPNP-
To use the Universal Plug and Play feature click on Enabled. UPNP provides compatibility with networking equipment, software and peripherals
of the over 400 vendors that cooperate in the Plug and Play forum.
VPN
Pass
Through-
The DI-524 supports VPN (Virtual Private Network) pass-through for
both PPTP (Point-to-Point Tunneling Protocol) and IPSec (IP Security).
Once VPN pass-through is enabled, there is no need to open up virtual
services. Multiple VPN connections can be made through the DI-524.
This is useful when you have many VPN clients on the LAN network.
PPTP- select Enabled or Disabled
IPSec- select Enabled or Disabled
35
Using the Configuration Menu (continued)
Status > Device Info
This page displays the current information for the DI-524. It will display the LAN, WAN
and MAC address information.
If your WAN connection is set up for a Dynamic IP address then a Release button
and a Renew button will be displayed. Use Release to disconnect from your ISP and
use Renew to connect to your ISP.
If your WAN connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection and use Connect
to establish the PPPoE connection.
This window will show the DI-524’s working status:
WAN
IP Address: WAN/Public IP Address
Subnet Mask: WAN/Public Subnet Mask
Gateway: WAN/Public Gateway IP Address
Domain Name Server: WAN/Public DNS IP Address
WAN Status: WAN Connection Status
LAN
IP Address: LAN/Private IP Address of the DI-524
Subnet Mask: LAN/Private Subnet Mask of the DI-524
Wireless
MAC Address: Displays the MAC address
SSID: Displays the current SSID
Channel: Displays the current channel
WEP: indicates whether WEP is enabled or disabled
36
Using the Configuration Menu (continued)
Status > Log
The Broadband Router keeps a running log of events and activities occurring on the
Router. If the device is rebooted, the logs are automatically cleared. You may save the
log files under Log Settings.
View Log-
First Page - The first page of the log
Last Page - The last page of the log
Previous - Moves back one log page
Next - Moves forward one log page
Clear - Clears the logs completely
Log Settings - Brings up the page to configure the log
37
Using the Configuration Menu (continued)
Status > Log > Log Settings
Not only does the Broadband Router display the logs of activities and events, it can
setup to send these logs to another location.
SMTP Server/
IP Address Email Address -
The address of the SMTP server that will be used to send the logs
The email address to which the logs will be sent.
Click on Send Mail Now to send the email.
38
Using the Configuration Menu (continued)
Status > Stats
The screen above displays theTraffic Statistics. Here you can view the amount of
packets that pass through the DI-524 on both the WAN and the LAN ports. The traffic
counter will reset if the device is rebooted.
Status > Wireless
The wireless client table displays a list of current connected wireless clients. This
table also displays the connection time and MAC address of the connected wireless
client.
Click on Help at any time, for more information.
39
Networking Basics
Using the Network Setup Wizard in Windows XP
In this section you will learn how to establish a network at home or work, using
Microsoft Windows XP.
Note: Please refer to websites such as http://www.homenethelp.com
and http://www.microsoft.com/windows2000 for information about networking
computers using Windows 2000, ME or 98.
Go to Start>Control Panel>Network Connections
Select Set up a home or small office network
When this screen appears, Click Next.
40

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Modify Date                     : 2005:10:12 12:13:38-07:00
Create Date                     : 2005:10:12 12:07:38-07:00
Metadata Date                   : 2005:10:12 12:13:38-07:00
Creator Tool                    : Adobe InDesign CS (3.0)
Format                          : application/pdf
Title                           : DI-524_manual.indd
Document ID                     : uuid:b5dd8c1a-f505-4cbf-8586-4bce204634f5
Instance ID                     : uuid:3eeb1284-295e-4e8c-a8e9-d8925c5bde39
Producer                        : Adobe PDF Library 6.0
Has XFA                         : No
Page Count                      : 10
Creator                         : Adobe InDesign CS (3.0)

EXIF Metadata provided by EXIF.tools