D Link DI624SA1 2.4 GHz Wireless 108 Mbps Mini PCI User Manual Introduction

Download:
Mirror Download [FCC.gov]
Document ID	492607
Application ID	xzl75h97hz9Qd4Q0AJxzvw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.81kB (260150 bits)
Date Submitted	2004-11-30 00:00:00
Date Available	2004-11-30 00:00:00
Creation Date	2004-11-12 15:33:51
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2004-11-25 19:12:35
Document Title	Introduction
Document Creator	Acrobat PDFMaker 6.0 for Word
Document Author:	goyani

108Mbps Wireless Network
Mini PCI Adapter
USER’S MANUAL
Model Name:
Version:
Date:
WL MP 2454 1A5
1.0
Nov/12/04
Please make sure TURN OFF your computer and remove the power cord from your
PC. Open the computer case and then please insert the 108Mbps Wireless mini PCI
Adapter. Once the 108Mbps Wireless mini PCI Adapter is installed, place the
computer case back. Turn ON your computer.
Driver Installation
1. Please select the second option and click “Next”.
2. Please click “Continue Anyway”
3. Please click “Finish”
4. To make sure if the installation is successful, you could check it through the
device management.
5. Once the installation is successful, a utility program icon will show on your
desktop. To lunch the utility, just double click the icon.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This device is intended only for OEM integrators under the following
conditions:
1) The antenna must be installed such that 20 cm is maintained between the
antenna and users, and
2) The transmitter module may not be co-located with any other transmitter
or antenna.
As long as 2 conditions above are met, further transmitter test will not be
required. However, the OEM integrator is still responsible for testing their
end-product for any additional compliance requirements required with this
module installed (for example, digital device emissions, PC peripheral
requirements, etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for
example certain laptop configurations or co-location with another transmitter),
then the FCC authorization is no longer considered valid and the FCC ID can
not be used on the final product. In these circumstances, the OEM integrator
will be responsible for re-evaluating the end product (including the transmitter)
and obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the
antenna may be installed such that 20 cm may be maintained between the
antenna and users .The final end product must be labeled in a. visible area
with the following: Contains TX FCC :KA2DI624SA1.
Manual Information That Must be Included
The OEM integrator has to be aware not to provide information to the end
user regarding how to install or remove this RF module in the users manual of
the end product which integrate this module.
The users manual for OEM integrators must include the following information
in a prominent location “ IMPORTANT NOTE: To comply with FCC RF
exposure compliance requirements, the antenna used for this transmitter
must be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with any other
antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2004:11:25 19:12:35+08:00
Create Date                     : 2004:11:12 15:33:51+08:00
Company                         : globalsuntech
Source Modified                 : D:20041112072356
Page Count                      : 6
Creator Version                 : 9
Container Version               : 9
For                             : chou angela, gst
Bounding Box                    : 90 105 507 769
Language                        : EN-US
About                           : uuid:30ea81f1-a13b-4fb4-ac5d-18871b6960dc
Producer                        : Acrobat Distiller 6.0 (Windows)
Creation Date                   : 2004:11:12 15:33:51+08:00
Mod Date                        : 2004:11:25 19:12:35+08:00
Author                          : goyani
Headline                        : 
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Metadata Date                   : 2004:11:25 19:12:35+08:00
Keywords                        : 
Document ID                     : uuid:a3a6e656-11a3-4097-b40e-3391685f3b27
Version ID                      : 2
Format                          : application/pdf
Title                           : Introduction
Creator                         : goyani
Subject                         : 
Tagged PDF                      : No
Image Height                    : 664
Image Width                     : 417
Image Size                      : 417x664
Megapixels                      : 0.277

EXIF Metadata provided by EXIF.tools