D Link DIR605D1 Wireless N Router User Manual

D Link Corporation Wireless N Router

User manual

D-Link DIR-605Wireless N Router中文快速安裝/設定指南 無線寬頻路由器
iD-Link DIR-605 User ManualD-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.Manual RevisionsTrademarksD-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.Copyright © 2009 by D-Link Systems, Inc.All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc.Revision Date Description1.0 July 31, 2008 t6QEBUFEGPSSFWJTJPOPreface
iiD-Link DIR-605 User ManualTable of ContentsPreface....................................................................................................... iManual Revisions........................................................................... iTrademarks ...................................................................................... iProduct Overview ................................................................................ 1Package Contents......................................................................... 1System Requirements................................................................. 2Features............................................................................................ 3Hardware Overview..................................................................... 4Connections ........................................................................... 4LEDs ........................................................................................... 5Installation .............................................................................................. 6Before you Begin...........................................................................6Wireless Installation Considerations...................................... 7Network Diagram ......................................................................... 8Connect to Cable/DSL/Satellite Modem.............................. 9Connect to Another Router ....................................................10Getting Started............................................................................12Conguration.......................................................................................13Web-based Conguration Utility..........................................13Internet Connection Setup Wizard...............................14Manual Conguration.......................................................19Dynamic (Cable).............................................................19Dynamic IP Address (DHCP).......................................20PPPoE (DSL)......................................................................21PPTP....................................................................................22L2TP ....................................................................................24Static IP Address.............................................................26Wireless Settings.................................................................27Manual Wireless Network Setup ..............................28Network Settings ................................................................30DHCP Server Settings...................................................31DHCP Reservation .........................................................32Virtual Server........................................................................34Port Forwarding ..................................................................36Application Rules................................................................37QoS Engine............................................................................38Network Filters.....................................................................39Access Control .....................................................................40Access Control Wizard..................................................40Website Filters......................................................................43Inbound Filters.....................................................................44Firewall Settings..................................................................45Advanced Wireless Settings............................................46Advanced Network Settings...........................................47UPnP ...................................................................................47Internet Ping Block........................................................47Internet Port Speed.......................................................47Multicast Streams ..........................................................47IPv6 ..........................................................................................48Link-Local Connectivity ...............................................49Static IPv6 (Stateful)......................................................50Static IPv6 (Stateless)....................................................51Table of Contents
iiiD-Link DIR-605 User ManualTable of ContentsDHCPv6 (Stateful) ..........................................................52DHCPv6 (Stateless)........................................................53IPv6 over PPPoE (Stateful)...........................................54IPv6 over PPPoE (Stateless) ........................................566 to 4 Tunneling (Stateful) ..........................................586 to 4 Tunneling (Stateless) ........................................59IPv6 in IPv4 Tunneling (Stateful)...............................60IPv6 in IPv4 Tunneling (Stateless).............................61Administrator Settings......................................................62Time Settings .......................................................................63SysLog.....................................................................................64E-mail Settings.....................................................................65System Settings...................................................................66Update Firmware ................................................................67DDNS.......................................................................................68System Check.......................................................................69Schedules ..............................................................................70Device Information ............................................................71Log ...........................................................................................73Stats.........................................................................................74Internet Sessions.................................................................75Wireless ..................................................................................77Support ..................................................................................78Wireless Security.................................................................................79What is WPA?................................................................................79Wireless Connection Setup Wizard ......................................80Add Wireless Device with WPS Wizard................................83Congure WPA-Personal (PSK)...............................................84Congure WPA-Enterprise (RADIUS)....................................85Connect to a Wireless Network .....................................................87Using Windows Vista®................................................................87Congure WPA/WPA2........................................................88Connect Using WCN 2.0 ...................................................90Using Windows® XP ....................................................................91Congure WPA-PSK............................................................92Troubleshooting .................................................................................94Wireless Basics.....................................................................................98What is Wireless?.........................................................................99Tips................................................................................................ 101Wireless Modes......................................................................... 102Networking Basics........................................................................... 103Check your IP address............................................................ 103Statically Assign an IP address............................................ 104Technical Specications................................................................ 105Warranty ............................................................................................. 106
1D-Link DIR-605 User ManualSection 1 - Product OverviewProduct OverviewNote: Using a power supply with a dierent voltage rating than the one included with the DIR-605 will cause damage and void the warranty for this product.Package ContentsD-Link DIR-605 Wireless N RouterPower AdapterEthernet CableCD-ROM
2D-Link DIR-605 User ManualSection 1 - Product OverviewNetwork Requirementst"O&UIFSOFUCBTFE$BCMFPS%4-NPEFNt*&&&OESBGUHXJSFMFTTDMJFOUTt&UIFSOFUWeb-based Conguration Utility RequirementsComputer with the following:t8JOEPXT®, Macintosh, or Linux-based operating system t"OJOTUBMMFE&UIFSOFUBEBQUFSBrowser Requirements:t*OUFSOFU&YQMPSFSPSIJHIFSt.P[JMMBPSIJHIFSt'JSFGPYPSIJHIFSt4BGBSJPSIJHIFSXJUI+BWBPSIJHIFSt'MPDLPSIJHIFSt0QFSBPSIJHIFSWindows® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version.CD Installation Wizard RequirementsComputer with the following:t8JOEPXT® XP with Service Pack 2 or Vista®t"OJOTUBMMFE&UIFSOFUBEBQUFSt$%30.ESJWFSystem Requirements
3D-Link DIR-605 User ManualSection 1 - Product Overviewt'BTUFS8JSFMFTT/FUXPSLJOH - The DIR-605 provides up to 300Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. t$PNQBUJCMFXJUIH%FWJDFT - The DIR-605 is still fully compatible with the IEEE 802.11g standard, so it can connect with existing 802.11g PCI, USB and Cardbus adapters.t"EWBODFE'JSFXBMM'FBUVSFT - The Web-based user interface displays a number of advanced network management features including: tContent Filtering - Easily applied content filtering based on MAC Address, URL, and/or Domain Name.tFilter Scheduling - These filters can be scheduled to be active on certain days or for a duration of hours or minutes.tSecure Multiple/Concurrent Sessions - The DIR-605 can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-605 can securely access corporate networks.t6TFSGSJFOEMZ4FUVQ8J[BSE - Through its easy-to-use Web-based user interface, the DIR-605 lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company’s server. Congure your router to your specic settings within minutes.* Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.Features
4D-Link DIR-605 User ManualSection 1 - Product OverviewHardware OverviewCti
5D-Link DIR-605 User ManualSection 1 - Product OverviewHardware OverviewLEDs
6D-Link DIR-605 User ManualSection 2 - InstallationBefore you BeginThis section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. t 1MFBTFDPOöHVSFUIFSPVUFSXJUIUIFDPNQVUFSUIBUXBTMBTUDPOOFDUFEEJSFDUMZUPZPVSNPEFNt :PV DBOPOMZVTF UIF&UIFSOFUQPSUPO ZPVSNPEFN*G ZPVXFSFVTJOH UIF64#DPOOFDUJPOCFGPSFVTJOHthe router, then you must turn o your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet). t *GZPVIBWF%4-BOE BSFDPOOFDUJOHWJB 111P&NBLFTVSFZPVEJTBCMFPSVOJOTUBMMBOZ111P&TPGUXBSFsuch as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.t 8IFOSVOOJOH UIF4FUVQ8J[BSEGSPNUIF %-JOL $%NBLFTVSFUIFDPNQVUFSZPVBSFSVOOJOHUIF$%from is connected to the Internet and online or the wizard will not work. If you have disconnected any hardware, re-connect your computer back to the modem and make sure you are online.Installation
7D-Link DIR-605 User ManualSection 2 - InstallationWireless Installation ConsiderationsThe D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building Materials make a dierence. A solid metal door or aluminum studs may have a negative eect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
8D-Link DIR-605 User ManualSection 2 - InstallationNetwork Diagram
9D-Link DIR-605 User ManualSection 2 - InstallationIf you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:1. Place the router in an open and central location. Do not plug the power adapter into the router. 2. Turn the power o on your modem. If there is no on/o switch, then unplug the modem’s power adapter. Shut down your computer.3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the Internet port on the router. 4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port on your computer.5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds). 6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the router to boot. 7. Turn on your computer. 8. Verify the link lights on the router. The power light, Internet light, and the LAN light (the port that your computer is plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable connections are correct. 9. Skip to page 13 to congure your router. Connect to Cable/DSL/Satellite Modem
10D-Link DIR-605 User ManualSection 2 - InstallationIf you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have to do the following before connecting the router to your network:t%JTBCMF61O1™t%JTBCMF%)$1t$IBOHFUIF -"/*1BEESFTTUPBO BWBJMBCMFBEESFTTPOZPVSOFUXPSL5IF-"/QPSUTPOUIF SPVUFSDBOOPUaccept a DHCP address from your other router.To connect to another router, please follow the steps below:1. Plug the power into the router. Connect one of your computers to the router (LAN port) using an Ethernet cable. Make sure your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the Networking Basics section for more information. If you need to change the settings, write down your existing settings before making any changes. In most cases, your computer should be set to receive an IP address automatically in which case you will not have to do anything to your computer.2. Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user name to Admin and leave the password box empty. Click Log In to continue.3. Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settingsto continue. 4. Click Setup and then click Network Settings. Uncheck the Enable DHCP Server server checkbox. Click Save Settings to continue.5. Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save Settings to save your settings. Use this new IP address to access the conguration utility of the router in the future. Close the browser and change your computer’s IP settings back to the original values as in Step 1.Connect to Another Router
11D-Link DIR-605 User ManualSection 2 - Installation6. Disconnect the Ethernet cable from the router and reconnect your computer to your network. 7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug anything into the Internet port of the D-Link router.  :PVNBZOPXVTFUIFPUIFS-"/QPSUTUPDPOOFDUPUIFS&UIFSOFUEFWJDFTBOEDPNQVUFST5PDPOöHVSFZPVSXJSFMFTTnetwork, open a web browser and enter the IP address you assigned to the router. Refer to the Conguration and Wireless Security sections for more information on setting up your wireless network.
12D-Link DIR-605 User ManualSection 2 - InstallationNote: It is recommended to write down the login password on the provided CD holder.The DIR-605 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to guide you RVJDLMZUISPVHIUIFJOTUBMMBUJPOQSPDFTT:PVNBZNBOVBMMZDPOöHVSFZPVSSPVUFSXJUIPVUUIFXJ[BSE3FGFSUPUIFOFYUQBHFto manually setup your router.Insert the Quick Router Setup Wizard CD in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows® XP or Vista®. The steps and screens are similar for the other Windows® operating systems.If the CD autorun function does not automatically start on your computer, go to Start > Run. In the run box type “D:\DIR605.exe” (where D: represents the drive letter of your CD-ROM drive).When the autorun screen appears, click Install Router and follow the on-screen instructions. Getting Started
13D-Link DIR-605 User ManualSection 3 - CongurationCongurationThis section will show you how to configure your new D-Link wireless router using the web-based configuration utility.Web-based Conguration UtilityTo access the conguration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1).Select Admin from the drop-down menu and then enter your password. Leave the password blank by default.If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.
14D-Link DIR-605 User ManualSection 3 - CongurationInternet Connection Setup WizardOnce logged into the web interface of the router, the Setup > Internet page will appear. Click the Internet Connection Setup Wizard button to quickly congure your router using the setup wizard.If you want to enter your settings without running the wizard, click Manual Internet Configuration Wizard and skip to page 19.
15D-Link DIR-605 User ManualSection 3 - CongurationClick Next to continue.Create a new password and then click Next to continue.Select your time zone from the drop-down menu and then click Next to continue.
16D-Link DIR-605 User ManualSection 3 - CongurationIf you selected Dynamic, you may need to enter the MAC address of the computer that was last connected directly to your modem. If you are currently using that computer, click $MPOF:PVS1$T."$"EESFTT and then click Next to continue.The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed.Select the type of Internet connection you use and then click Next to continue.
17D-Link DIR-605 User ManualSection 3 - CongurationIf you selected PPTP, enter your PPTP username and password. Click Next to continue.If you selected PPPoE, enter your PPPoE username and password. Click Next to continue.Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.
18D-Link DIR-605 User ManualSection 3 - CongurationIf you selected L2TP, enter your L2TP username and password. Click Next to continue.If you selected Static, enter your network settings supplied by your Internet provider. Click Next to continue.Click Connect to save your settings. Once the router is finished rebooting, click Continue. Please allow 1-2 minutes to connect.
19D-Link DIR-605 User ManualSection 3 - CongurationIf you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to select your Internet type and enter the correct conguration parameters.Select your Internet connection type using the “My Internet Connection is” drop-down menu.Click the Save Settings button when you have congured the connection.Manual CongurationDynamic (Cable)
20D-Link DIR-605 User ManualSection 3 - CongurationDynamic IP Address (DHCP)Select Dynamic IP (DHCP) to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for Cable modem services.The Host Name is optional but may be required by some ISPs. Check the box if you are having problems obtaining an IP address from your ISP.Enter the Primary DNS server IP address assigned by your ISP.Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not SFDPNNFOEFEUIBUZPVDIBOHF UIFEFGBVMU."$BEESFTTVOMFTTSFRVJSFECZZPVS*41:PVDBOVTF UIF$MPOF:PVS1$TMAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.My Internet Connection:Host Name:MAC Address:DNS Addresses:MTU:Use Unicasting:
21D-Link DIR-605 User ManualSection 3 - CongurationSelect PPPoE (Username/Password) from the drop-down menu.Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.Enter the IP address (Static PPPoE only).Enter your PPPoE user name.Enter your PPPoE password and then retype the password in the next box.Enter the ISP Service Name (optional).Select either Always-on, On-Demand, or Manual.Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only).Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1492 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended UIBUZPVDIBOHFUIFEFGBVMU."$BEESFTTVOMFTTSFRVJSFECZZPVS*41:PVDBOVTFUIF$MPOF:PVS1$T."$"EESFTT button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.My Internet Connection:Address Mode:IP Address:User Name:Password:Service Name:Reconnection Mode:Maximum Idle Time:DNS Addresses:MTU:MAC Address:PPPoE (DSL)$IPPTF111P&1PJOUUP1PJOU1SPUPDPMPWFS&UIFSOFUJGZPVS*41VTFTB 111P&DPOOFDUJPO:PVS*41 XJMMQSPWJEFyou with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.
22D-Link DIR-605 User ManualSection 3 - CongurationSelect Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.Enter the IP address (Static PPTP only).Enter the Primary and Secondary DNS Server Addresses (Static PPTP only).Enter the Gateway IP Address provided by your ISP.Enter the Server IP provided by your ISP (optional).Enter your PPTP username.Enter your PPTP password and then retype the password in the next box.Select either Always-on, On-Demand, or Manual.Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.The DNS server information will be supplied by your ISP (Internet Service Provider.)Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1400 is the default MTU.Address Mode:PPTP IP Address:PPTP Subnet Mask:PPTP Gateway:PPTP Server IP:PPTP$IPPTF11511PJOUUP1PJOU5VOOFMJOH1SPUPDPMJG ZPVS*41VTFTB 1151DPOOFDUJPO:PVS*41 XJMMQSPWJEFZPVXJUIa username and password. This option is typically used for DSL services. Username:Password:Reconnect Mode:Maximum Idle Time:DNS Servers:MTU:
23D-Link DIR-605 User ManualSection 3 - CongurationThe default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended UIBUZPVDIBOHFUIFEFGBVMU."$BEESFTTVOMFTTSFRVJSFECZZPVS*41:PVDBOVTFUIF$MPOF:PVS1$T."$"EESFTT button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.MAC Address:
24D-Link DIR-605 User ManualSection 3 - CongurationSelect Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.Enter the L2TP IP address supplied by your ISP (Static only).Enter the Subnet Mask supplied by your ISP (Static only).Enter the Gateway IP Address provided by your ISP.Enter the Server IP provided by your ISP (optional).Enter your L2TP username.Enter your L2TP password and then retype the password in the next box.Select either Always-on, On-Demand, or Manual.Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).Address Mode:L2TP IP Address:L2TP Subnet Mask:L2TP Gateway:L2TP Server IP:Username:Password:Reconnect Mode:Maximum Idle Time:DNS Servers:L2TP$IPPTF-51-BZFS5VOOFMJOH1SPUPDPMJGZPVS*41VTFTB -51DPOOFDUJPO:PVS*41 XJMMQSPWJEFZPVXJUIBusername and password. This option is typically used for DSL services.
25D-Link DIR-605 User ManualSection 3 - CongurationMTU:Clone MAC Address:Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not SFDPNNFOEFEUIBUZPVDIBOHF UIFEFGBVMU."$BEESFTTVOMFTTSFRVJSFECZZPVS*41:PVDBOVTF UIF $MPOF:PVS 1$TMAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
26D-Link DIR-605 User ManualSection 3 - CongurationSelect Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.Enter the IP address (Static PPTP only).Enter the Primary and Secondary DNS server Addresses (Static PPTP only).Enter the Gateway IP Address provided by your ISP.Enter the Server IP provided by your ISP (optional).Enter your PPTP username.Enter your PPTP password and then retype the password in the next box.Select either Always-on, On-Demand, or Manual.Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).Address Mode:PPTP IP Address:PPTP Subnet Mask:PPTP Gateway:PPTP Server IP:Username:Password:Reconnect Mode:Maximum Idle Time:DNS Servers:Russia PPTP$IPPTF3VTTJB1151%VBM"DDFTTJGZPVS*41VTFTB1151DPOOFDUJPO:PVS*41XJMMQSPWJEFZPVXJUIBVTFSOBNFBOEQBTTXPSEThis option is typically used for DSL services.
27D-Link DIR-605 User ManualSection 3 - CongurationMTU:Clone MAC Address:Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1400 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended UIBUZPVDIBOHFUIFEFGBVMU."$BEESFTTVOMFTTSFRVJSFECZZPVS*41:PVDBOVTFUIF$MPOF:PVS1$T."$"EESFTT button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
28D-Link DIR-605 User ManualSection 3 - CongurationSave your settings after configuring your Internet Connection method.Enable to turn your router into an access point.Choose your Internet Connection type.Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.Enter the IP address (Static PPPoE only).Enter the Primary and Secondary DNS server Addresses (Static PPPoE only).Enter the Gateway IP Address provided by your ISP.Enter your PPPoE password and then retype the password in the next box.Select either Always-on, On-Demand, or Manual.Enter your PPPoE password and then retype the password in the next box.Internet Connection:Access Point Mode:Internet Connection Type:Address Mode:PPPoE IP Address:PPPoE Subnet Mask:PPPoE Gateway:PPPoE Server IP:Username:Password:Russia PPPoE$IPPTF3VTTJB111P&%VBM"DDFTTJGZPVS*41VTFTB111P&DPOOFDUJPO:PVS*41XJMMQSPWJEFZPVXJUIBVTFSOBNFBOEQBTTXPSEThis option is typically used for DSL services.
29D-Link DIR-605 User ManualSection 3 - CongurationReconnect Mode:Maximum Idle Time:DNS Servers: MTU:Clone MAC Address:Select either Always-on, On-Demand, or Manual.Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1400 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended UIBUZPVDIBOHFUIFEFGBVMU."$BEESFTTVOMFTTSFRVJSFECZZPVS*41:PVDBOVTFUIF$MPOF:PVS1$T."$"EESFTT button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
30D-Link DIR-605 User ManualSection 3 - CongurationEnter the IP address assigned by your ISP.Enter the Subnet Mask assigned by your ISP.Enter the Gateway assigned by your ISP.The DNS server information will be supplied by your ISP (Internet Service Provider.)Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1500 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended UIBUZPVDIBOHFUIFEFGBVMU."$BEESFTTVOMFTTSFRVJSFECZZPVS*41:PVDBOVTFUIF$MPOF:PVS1$T."$"EESFTT button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.IP Address:Subnet Mask:Default Gateway:DNS Servers:MTU:MAC AddressStatic IP Address4FMFDU 4UBUJD*1"EESFTTJGBMM UIF*OUFSOFUQPSUT *1JOGPSNBUJPOJTQSPWJEFEUPZPVCZZPVS*41:PVXJMM OFFEUPFOUFSJOUIF*1BEESFTTsubnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
31D-Link DIR-605 User ManualSection 3 - CongurationWireless SettingsIf you want to congure the wireless settings on your router using the wizard, click Wireless Connection Setup Wizard and refer to page 80.Click Add Wireless Device with WPS if you want to add a wireless device using Wi-Fi Protected Setup (WPS) and refer to page 83.If you want to manually congure the wireless settings on your router click Manual Wireless Network Setup and refer to the next page.
32D-Link DIR-605 User ManualSection 3 - CongurationManual Wireless Network SetupCheck the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions. Click Add New to create your own time schedule to enable the wireless function. Service Set Identier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The SSID is case-sensitive.Select one of the following:802.11g Only - Select if all of your wireless clients are 802.11g.Mixed 802.11g and 802.11b - Select if you are using both 802.11b and 802.11g wireless clients.802.11b Only - Select if all of your wireless clients are 802.11b.802.11n Only - Select only if all of your wireless clients are 802.11n.Mixed 802.11n, 802.11b, and 802.11g - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.Mixed 802.11n and 802.11g - Select if you are using a mix of 802.11n and 802.11g wireless clients.The Auto Channel Scan setting can be selected to allow the DIR-605 to choose the channel with the least amount of interference.Indicates the channel setting for the DIR-605. By default the channel is set to 6. The Channel can be changed to t the channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will be greyed out.Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance.Select the Channel Width:Enable Wireless:Wireless Network Name:802.11 Mode:Transmission Rate:Enable Auto Channel Scan:Wireless Channel:
33D-Link DIR-605 User ManualSection 3 - CongurationAuto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting. Select to enable hidden wireless.Refer to page 79 for more information regarding wireless security.Enable Hidden Wireless:Channel Width:Wireless Security:
34D-Link DIR-605 User ManualSection 3 - CongurationThis section will allow you to change the local network settings of the router and to congure the DHCP settings.Network SettingsEnter the IP address of the router. The default IP address is 192.168.0.1.If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to get back into the conguration utility.Enter the Subnet Mask. The default subnet mask is 255.255.255.0.Enter the Domain name (Optional).Enter the Device name (set to “dlinkrouter” by default).Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server.IP Address:Subnet Mask:Local Domain:Device Name:Enable DNS Relay:
35D-Link DIR-605 User ManualSection 3 - CongurationCheck this box to enable the DHCP server on your router. Uncheck to disable this function.Enter the starting and ending IP addresses for the DHCP server’s IP assignment.Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conict. The length of time for the IP address lease. Enter the Lease time in minutes.The NetBIOS API allows applications on seperate computers to communicate over LAN. The user can check this option to enable this function.Each computers in the network have both NetBIOSname and IP address corresponding to the Host name.The user may simply use the NetBIOS name to log inrouter web interface. (The default is “dlinkrouter”)Enable DHCP Server:DHCP IP Address Range:Lease Time:NetBIOSAnnouncement:Learn NetBIOSfrom WAN:DHCP Server SettingsDHCP stands for Dynamic Host Control Protocol. The DIR-605 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DIR-605. The DHCP Server will automatically allocate an unused IP address from UIF*1BEESFTTQPPMUPUIFSFRVFTUJOHDPNQVUFS:PVNVTUTQFDJGZUIFTUBSUJOHBOEFOEJOHBEESFTTPGUIF*1BEESFTTQPPM
36D-Link DIR-605 User ManualSection 3 - CongurationNetBIOS Scope(optional):Primary/Secondary WINS IP Address:The users may add some characters behind the NetBIOS name to dierentiate it from other D-Link routers. It follows the naming rule for DNS names.Use this function to allow the seperate computers in a seperate subnet to search the computers in the same workgroup.
37D-Link DIR-605 User ManualSection 3 - CongurationDHCP ReservationIf you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within the DHCP IP Address Range.Enter the computer name or select from the drop-down menu and click <<.Enter the IP address you want to assign to the computer or device. This IP Address must be within the DHCP IP Address Range.Enter the MAC address of the computer or device.Click SaveUPTBWFZPVSFOUSZ:PVNVTUDMJDLSave Settings at the top to activate your reservations. In this section, you can see what LAN devices are currentl leasing IP addresses.The Reserve option converts this dynamic IP allocation into a DHCP Reservation and adds the corresponding entry to the DHCP Reservations List.Computer Name:IP Address:MAC Address:Save:Number of Dynamic DHCP Clients:Reserve:
38D-Link DIR-605 User ManualSection 3 - CongurationThe DIR-605 can be congured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DIR-605 rewall feature lters out unrecognized packets to protect your LAN network so all computers networked with the DIR-605 are invisible to the outside world. If you wish, you can make some of the LAN computers accessible from the Internet by enabling Virtual Server. Depending on the requested service, the DIR-605 redirects the external service request to the appropriate server within the LAN network. The DIR-605 is also capable of port-redirection meaning incoming trac to a particular port may be redirected to a dierent port on the server computer.Each virtual service that is created will be listed at the bottom of the screen in the Virtual Servers List. There are QSFEFöOFEWJSUVBMTFSWJDFTBMSFBEZJOUIFUBCMF:PVNBZVTFUIFNby enabling them and assigning the server IP to use that particular virtual service.For a list of ports for common applications, please visit http://support.dlink.com/faq/view.asp?prod_id=1191.Virtual Server
39D-Link DIR-605 User ManualSection 3 - CongurationThis will allow you to open a single port. If you would like to open a range of ports, refer to the next page.Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the elds.Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the “Computer Name” drop-down menu. Select your computer and click <<.Enter the port that you want to open next to Private Port and Public Port. The private and public ports are usually the same. The public port is the port seen from the Internet side, and the private port is the port being used by the application on the computer within your local network.Select TCP, UDP, or Both from the drop-down menu.Select Allow All (most common) or a created *OCPVOEöMUFS:PVNBZDSFBUFZPVSPXOJOCPVOEöMUFSTJOUIFAdvanced > Inbound Filter page.The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the QBSUJDVMBSTFSWJDFUPBMXBZTCFFOBCMFE:PVDBODSFBUFZPVSPXOUJNFTJOUIFTools > Schedules section.Name:IP Address:Private Port/Public Port:Protocol Type:Inbound Filter:Schedule:
40D-Link DIR-605 User ManualSection 3 - CongurationThis will allow you to open a single port or a range of ports.Port ForwardingEnter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the elds.Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the “Computer Name” drop-down menu. Select your computer and click <<.Enter the TCP and/or UDP port or ports that you XBOUUPPQFO:PVDBOFOUFSBTJOHMFQPSUPSBSBOHFof ports. Separate ports with a common.Example: 24,1009,3000-4000Select Allow All (most common) or a created *OCPVOEGJMUFS:PV NBZDSFBUFZPVSPXOJOCPVOElters in the Advanced > Inbound Filter page.The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always CFFOBCMFE:PVDBODSFBUFZPVSPXOUJNFTJOUIFTools > Schedules section.Name:IP Address:TCP/UDP:Inbound Filter:Schedule:
41D-Link DIR-605 User ManualSection 3 - Conguration&OUFSB OBNFGPSUIFSVMF:PVNBZTFMFDU Bpre-defined application from the drop-down menu and click <<.This is the port used to trigger the application. It can be either a single port or a range of ports.Select the protocol of the trigger port (TCP, UDP, or Both).This is the port number on the Internet side that XJMMCFVTFE UPBDDFTTUIFBQQMJDBUJPO:PVNBZEFGJOFBTJOHMF QPSUPS BSBOHFPGQPSUT:PVcan use a comma to add multiple ports or port ranges.Select the protocol of the firewall port (TCP, UDP, or Both).Name:Trigger:Trac Type:Firewall:Trac Type:Application RulesSome applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have diculties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DIR-605. If you need to run applications that require multiple connections, specify the port normally associated with an application in the “Trigger Port” eld, select the protocol type as TCP or UDP, then enter the rewall (public) ports associated with the trigger port to open them for inbound trac.The DIR-605 provides some predened applications in the table on the bottom of the web page. Select the application you want to use and enable it.
42D-Link DIR-605 User ManualSection 3 - CongurationQoS EngineThis option is disabled by default. Enable this option for better performance and experience with online games and other interactive applications, such as VoIP.This option is enabled by default when the QoS Engine option is enabled. This option will allow your router to automatically determine the uplink speed of your Internet connection.This displays the detected uplink speed.The speed at which data can be transferred from the router to your ISP. This is determined by your ISP. ISP’s oer speed as a download/upload pair. For example, 1.5Mbits/284Kbits. Using this example, you would enter 284. Alternatively you can test your uplink speed with a service such as www.dslreports.com.This option allows you to select your connection type.This displays if xDSL or other frame relay network has been detected.Enable QoS Engine:Automatic Uplink Speed:Measured Uplink Speed:Manual Uplink Speed:Connection Type:Detected xDSL or Other Frame Relay Network:The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are disabled and application priority is not classied automatically.
43D-Link DIR-605 User ManualSection 3 - CongurationNetwork FiltersSelect Turn MAC Filtering Off, allow MAC addresses listed below, or deny MAC addresses listed below from the drop-down menu. Enter the MAC address you would like to lter.To nd the MAC address on a computer, please refer to the Networking Basics section in this manual. Select a DHCP client from the drop-down menu and click << to copy that MAC Address. Select to set the new schedule.Congure MAC Filtering:MAC Address:DHCP Client:New Schedule:Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses GSPNBDDFTTJOHUIF/FUXPSL:PVDBOFJUIFS NBOVBMMZBEEB ."$BEESFTTPSTFMFDUUIF."$BEESFTTGSPNUIF MJTUPGclients that are currently connected to the Broadband Router.
44D-Link DIR-605 User ManualSection 3 - CongurationAccess ControlCheck the Enable Access Control check box and click the Add Policy button to start the Access Control Wizard.Add Policy:The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls to only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like P2P utilities or games.Click Next to continue with the wizard.Access Control Wizard
45D-Link DIR-605 User ManualSection 3 - CongurationEnter a name for the policy and then click Next to continue.Access Control Wizard (continued)Select a schedule (I.E. Always) from the drop-down menu and then click Next to continue.Enter the following information and then click Next to continue.t"EESFTT5ZQF 4FMFDU*1 BEESFTT."$BEESFTTPSOther Machines.t*1"EESFTT &OUFSUIF*1 BEESFTTPG UIFDPNQVUFSyou want to apply the rule to.
46D-Link DIR-605 User ManualSection 3 - CongurationSelect the ltering method and then click Next to continue.Access Control Wizard (continued)Enter the rule:Enable - Check to enable the rule.Name - Enter a name for your rule.Dest IP Start - Enter the starting IP address.Dest IP End - Enter the ending IP address.Protocol - Select the protocol.Dest Port Start - Enter the starting port number.Dest Port End - Enter the ending port number.To enable web logging, click Enable.Click Save to save the access control rule.
47D-Link DIR-605 User ManualSection 3 - CongurationSelect Deny or Allow computers access to only these sites.Click to delete all entries in the list.Enter the keywords or URLs that you want to allow or deny.Select to set the new scheulde.Congure Website Filter Below:Clear the list below:Website URL/Domain:New Schedule:Website FiltersWebsite Filters are used to allow you to set up a list of allowed Web sites that can be used by multiple users through the network. To use this feature select to Allow or Deny, enter the domain or website and click Add, and then click Save Settings:PVNVTUBMTPTFMFDUApply Web Filter under the Access Control section (page 40).
48D-Link DIR-605 User ManualSection 3 - CongurationEnter a name for the inbound lter rule.Select Allow or Deny.Check to enable rule.Enter the starting IP address. Enter 0.0.0.0 if you do not want to specify an IP range.Enter the ending IP address. Enter 255.255.255.255 if you do not want to specify and IP range.Click the Save button to apply your settings. :PV NVTUDMJDL4BWF4FUUJOHTBU UIFUPQUPsave the settings.This section will list any rules that are created. :PV NBZDMJDL UIF Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule.Name:Action:Enable:Source IP Start:Source IP End:Save:Inbound Filter Rules List:The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can congure inbound data ltering rules that control data based on an IP address range. Inbound Filters can be used with Virtual Server, Port Forwarding, or Remote Administration features.Inbound Filters
49D-Link DIR-605 User ManualSection 3 - CongurationSPI (Stateful Packet Inspection, also known as dynamic packet ltering) helps to prevent cyber attacks by tracking more state per session. It validates that the trac passing through the session conforms to the protocol.Select one of the following for TCP and UDP ports:Endpoint Independent - Any incoming trac sent to an open port will be forwarded to the application that opened the port. The port will close if idle for 5 minutes.Address Restricted - Incoming trac must match the IP address of the outgoing connection.Address + Port Restriction - Incoming trac must match the IP address and port of the outgoing connection.Enable this option to provide protection from certain kinds of “spoong” attacks.If an application has trouble working from behind the router, you can expose one computer to the Internet and run the application on that computer.Note: Placing a computer in the DMZ may expose that computer to a variety of security risks. Use of this option is only recommended as a last resort.Specify the IP address of the computer on the LAN that you want to have unrestricted Internet communication. If this computer obtains its IP address automatically using DHCP, be sure to make a static reservation on the System > Network Settings page so that the IP address of the DMZ machine does not change.Enable SPI:NAT Endpoint Filtering:Enable Anti-Spoof Checking:Enable DMZ Host:IP Address:Firewall SettingsA rewall protects your network from the outside world. The D-Link DIR-605 oers a rewall type functionality. The SPI feature helps prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain types of applications. If you choose to expose a computer, you can enable DMZ. DMZ is short for Demilitarized Zone. This option will expose the chosen computer completely to the outside world.
50D-Link DIR-605 User ManualSection 3 - CongurationTo use the Universal Plug and Play (UPnP™) feature, click on Enabled. UPNP provides compatibility with networking equipment, software and peripherals.Unchecking the box will not allow the device to respond to pings. Blocking the ping may provide some extra security from hackers. Check the box to allow the Internet port to be “pinged”.:PV NBZTFU UIFTQFFEPGUIF *OUFSOFUQPSU UP10Mbps, 100Mbps, or auto. Older cable/DSL modems may require you to set your port speed to 10Mps.Check the box to allow multicast trac to pass through the router from the Internet.UPnP Settings:WAN Ping:WAN Port Speed:Multicast Streams:Advanced Network Settings (Routing)
51D-Link DIR-605 User ManualSection 3 - CongurationSet the transmit power of the antennas.Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended. This value should remain at its default setting of 2432. If inconsistent data ow is a problem, only a minor modication should be made.The fragmentation threshold, which is specied in bytes, determines whether packets will be fragmented. Packets exceeding the 2346 byte setting will be fragmented before transmission. 2346 is the default setting. (Delivery Traffic Indication Message) 3 is the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages.This enables 802.11d operation. 802.11d is a wireless specication developed to allow implementation of wireless networks in countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients.Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may create higher data loss.Transmit Power:Beacon Period:RTS Threshold:Fragmentation Threshold:DTIM Interval:WLAN Partition:WMM Enable:Short GI:Advanced Wireless Settings
52D-Link DIR-605 User ManualSection 3 - CongurationUPnPInternet Ping BlockInternet Port SpeedMulticast StreamsTo use the Universal Plug and Play (UPnP™)feature click on Enabled. UPNP provides compatibility with networking equipment, software and peripherals.Unchecking the box will not allow the DIR-605 to respond to pings. Blocking the Ping may provide some extra security from hackers. Check the box to allow the Internet port to be “pinged”.:PV NBZTFU UIFQPSUTQFFE PGUIF*OUFSOFUQPSUto 10Mbps, 100Mbps, or auto. Some older cable or DSL modems may require you to set the port speed to 10Mbps.Check the box to allow multicast traffic to pass through the router from the Internet.UPnP Settings:WAN Ping:WAN Port Speed:Multicast Streams:Advanced Network Settings
53D-Link DIR-605 User ManualSection 3 - CongurationMy IPv6 Connection:PPPoE:Address Mode:IP Address:User Name:Password:Service Name:Reconnection Mode:Maximum Idle Time:Select PPPoE from the drop-down menu.Enter the PPPoE account settings supplied by your Internet provider (ISP). Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.Enter the IP address (Static PPPoE only).Enter your PPPoE user name.Enter your PPPoE password and then retype the password in the next box.Enter the ISP Service Name (optional).Select either Always-on, On-Demand, or Manual.Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.Select either Obtain DNS server address automatically or Use the following DNS Address.Enter the primary and secondary DNS server addresses.
54D-Link DIR-605 User ManualSection 3 - CongurationChange PasswordRemote ManagementEnter a new password for the Administrator Login Name. The administrator can make changes to the settings.Enter the new password for the User login. If you login as the User, you can only see the settings, but cannot change them.Remote management allows the DIR-605 to be congured from the Internet by a web browser. A username and password is still required to access the Web-Management interface. In general, only a member of your network can browse the built-in web pages to perform Administrator tasks. This feature enables you to perform Administrator tasks from the remote (Internet) host.The port number used to access the DIR-605.Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-605 and 8080 is the port used for the Web Management interface.5IJTTFDUJPOXJMMMJTUBOZSVMFTUIBUBSFDSFBUFE:PVNBZDMJDLUIFEdit icon to change the settings or enable/disable the rule, or click the ADVANCED-Inbound lter web page to congure.The device supports this function to prevent phishing.Admin Password:User Password:Remote Management:Remote Admin Port:Inbound Filter:Enable GraphicalAuthentication:Administrator Settings5IJTQBHFXJMMBMMPXZPVUPDIBOHF UIF"ENJOJTUSBUPSBOE6TFSQBTTXPSET:PV DBOBMTPFOBCMF 3FNPUF.BOBHFNFOUThere are two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and user account passwords.
55D-Link DIR-605 User ManualSection 3 - CongurationTime SettingsSelect the Time Zone from the drop-down menu.To select Daylight Saving time manually, select enabled or disabled, and enter a start date and an end date for daylight saving time.Press this button to set the device’s time the same to local PC. NTP is short for Network Time Protocol. NTP synchronizes computer clock times in a network of computers. Check this box to use a NTP server. This will only connect to a server on the Internet, not a local server.Enter the NTP server or select one from the drop-down menu, then the DIR-605 will sync the same time to D-Link Internet time server. To manually input the time, enter the values in UIFTFöFMETGPSUIF:FBS.POUI%BZ)PVS.JOVUFand Second and then click Set Time.Time Zone:Daylight Saving:Sync your Computer’s Time Settings:Enable NTP Server:NTP Server Used:Manual:The Time Conguration option allows you to congure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be congured to automatically adjust the time when needed.
56D-Link DIR-605 User ManualSection 3 - CongurationSysLog5IF#SPBECBOE3PVUFSLFFQTBSVOOJOHMPHPGFWFOUTBOEBDUJWJUJFTPDDVSSJOHPOUIF 3PVUFS:PVNBZTFOE UIFTFMPHTto a SysLog server on your network.Save Log Files to Local Hard Drive:Enable Logging to SysLog Server:SysLog Server IP Address:Click on the Save button to save log le to local hard drive which can later send to the network administrator for troubleshooting.Check this box to send the router logs to a SysLog Server.The address of the SysLog server that will be VTFEUPTFOEUIFMPHT:PVNBZBMTPTFMFDUyour computer from the drop-down menu (only if receiving an IP address from the router via DHCP).
57D-Link DIR-605 User ManualSection 3 - CongurationE-mail SettingsThe Email feature can be used to send the system log files, router alert messages, and firmware update notification to your e-mail address. Enable Email Notication: From Email Address:To Email Address:SMTP Server Address:EnableAuthentication:Account Name:Password:On Log Full:On Schedule:Schedule:When this option is enabled, router activity logs are e-mailed to a designated e-mail address.This e-mail address will appear as the sender when you receive a log le or rmware upgrade notication via e-mail.Enter the e-mail address where you want the e-mail sent. Enter the SMTP server address for sending e-mail. If your SMTP server requires authentication, select this option.Check this box if your SMTP server requires authentication. Enter your account for sending e-mail.Enter the password associated with the account. Re-type the password associated with the account.When this option is selected, logs will be sent via e-mail when the log is full.Selecting this option will send the logs via e-mail according to schedule.5IJTPQUJPOJTFOBCMFEXIFO0O4DIFEVMFJTTFMFDUFE:PVDBOTFMFDUBTDIFEVMFGSPNUIFMJTUPGEFöOFETDIFEVMFT5PDSFBUFBTDIFEVMFgo to Tools > Schedules.
58D-Link DIR-605 User ManualSection 3 - CongurationUse this option to save the current router conguration settings to a le on the hard disk of the computer you are using. First, click the SaveCVUUPO:PVXJMM UIFOTFFBGJMF EJBMPHwhere you can select a location and le name for the settings. Use this option to load previously saved router configuration settings. First, use the Browse control to find a previously save file of configuration settings. Then, click the Loadbutton to transfer those settings to the router. This option will restore all conguration settings back to the settings that were in effect at the time the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router conguration settings, use the Save button above. Click to reboot the router.This is to restore the device back to English version only. Remove other languages installed for the system web pages. Save Settings to Local Hard Drive:Load Settings from Local Hard Drive:Restore to Factory Default Settings:Reboot Device:Clear Language Pack:System Settings
59D-Link DIR-605 User ManualSection 3 - CongurationDisplays the current rmware version and date.:PV DBOBMTPDIFDL UIF BWBJMBCJMJUZPGB OFXrmware version online. If so, download the new rmware to your hard drive.After you have downloaded the new rmware, click Browse to locate the rmware update on your hard drive. Click Upload to complete the rmware upgrade.This function allows the user to transfer the language of GUI from English to theirs by upgrading the language pack.Firmware Information:Firmware Upgrade:Language Pack Upgrade:Update Firmware:PVDBOVQHSBEFUIF öSNXBSFPGUIF 3PVUFSIFSF.BLF TVSFUIFöSNXBSFZPVXBOU UPVTFJTPO UIFMPDBMIBSEESJWFPGthe computer. Click on Browse to locate the rmware le to be used for the update. Please check the D-Link support TJUFGPSöSNXBSFVQEBUFTBUIUUQTVQQPSUEMJOLDPN:PVDBO EPXOMPBEöSNXBSFVQHSBEFTUPZPVSIBSEESJWFGSPNUIFD-Link support site.
60D-Link DIR-605 User ManualSection 3 - CongurationDynamic Domain Name System is a method of keeping a domain name linked to a changing IP Address. Check the box to enable DDNS.Choose your DDNS provider from the drop down menu.Enter the Host Name that you registered with your DDNS service provider.Enter the Username for your DDNS account.Enter the Password for your DDNS account.This is to test if the DDNS account is valid for use.DDNS:Server Address:Host Name:Username or Key:Password or Key:DDNS Account Testing:DDNSThe DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in your domain name to connect to your server no matter what your IP address is.
61D-Link DIR-605 User ManualSection 3 - CongurationThe Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping.The results of your ping attempts will be displayed here.The System Check tool can be used to verify the physical connectivity on both the LAN and Internet interfaces.Ping Test:Ping Results:System Check:The System Check feature allows you to verify the physical connectivity on both LAN and Internet interface.System Check
62D-Link DIR-605 User ManualSection 3 - CongurationEnter a name for your new schedule.Select a day, a range of days, or All Week to include every day.Check All Day - 24hrs or enter a start and end time for your schedule.Click Save UP TBWF ZPVS TDIFEVMF :PVmust click Save Settings at the top for your schedules to go into eect.The list of schedules will be listed here. Click the Edit icon to make changes or click the Delete icon to remove the schedule.Name:Days:Time:Save:Schedule Rules List:Schedules
63D-Link DIR-605 User ManualSection 3 - CongurationThis page displays the current information for the DIR-605. It will display the LAN, WAN (Internet), and Wireless information.If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP. If your Internet connection is set up for PPPoE, a Connectbutton and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection.See the following page for more information.Device Information
64D-Link DIR-605 User ManualSection 3 - CongurationDisplays the router’s time and rmware version.Displays the MAC address and the public IP settings for the router.Displays the MAC address and the private (local) IP settings for the router.Displays the wireless MAC address and your wireless settings such as SSID and Channel.Displays computers and devices that are connected to the router via Ethernet and that are receiving an IP address assigned by the router (DHCP). Displays the Multicast Group IP Address.General:Internet:LAN:Wireless LAN:LAN Computers:IGMP Multicast Memberships:
65D-Link DIR-605 User ManualSection 3 - CongurationLogWhat to View:View Levels:Clear:Link to Log Settings::PV DBOTFMFDUUIFUZQFTPGNFTTBHFT UIBUZPVXBOUto display from the log. Firewall & Security, System, and Router Status messages can be selected.There are three levels of message importance: Informational, Warning, and Critical. Select the levels that you want displayed in the log.Clears all of the log contents.The user can click the button to “ link to log settings” and save the logs to local hard drive or to syslog server.The router automatically logs (records) events of possible interest in it’s internal memory. If there isn’t enough internal memory for all events, logs of older events are deleted but logs of the latest events are retained. The Logs option allows ZPVUPWJFXUIFSPVUFSMPHT:PVDBOEFöOFXIBUUZQFTPGFWFOUTZPVXBOUUPWJFXBOE UIFMFWFMPGUIF FWFOUTUPWJFXThis router also has external Syslog Server support so you can send the log les to a computer on your network that is running a Syslog utility.
66D-Link DIR-605 User ManualSection 3 - CongurationStatsThe screen below displays the Trac Statistics. Here you can view the amount of packets that pass through the DIR-605 on both the Internet and the LAN ports. The trac counter will reset if the device is rebooted.
67D-Link DIR-605 User ManualSection 3 - CongurationInternet SessionsThe Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. IP Address:TCP Session:UDP Session:The IP address and, where appropriate, port number of the local application. This shows the number of TCP packets being sent from the source IP address.This shows the number of UDP packets being sent from the source IP address.
68D-Link DIR-605 User ManualSection 3 - CongurationThe wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients.Wireless
69D-Link DIR-605 User ManualSection 3 - CongurationThe routing table displays all routing related information congured for your router.Routing Table
70D-Link DIR-605 User ManualSection 3 - CongurationSupport
71D-Link DIR-605 User ManualSection 4 - SecurityWireless SecurityThis section will show you the dierent levels of security you can use to protect your data from intruders. The DIR-605 oers the following types of security:t81"8J'J1SPUFDUFE"DDFTT  t81"14,1SF4IBSFE,FZt81"8J'J1SPUFDUFE"DDFTT   t81"14,1SF4IBSFE,FZWhat is WPA?WPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). The 2 major improvements over WEP: t*NQSPWFEEBUBFODSZQUJPOUISPVHIUIF5FNQPSBM,FZ *OUFHSJUZ1SPUPDPM5,*15,*1TDSBNCMFTUIF LFZTusing a hashing algorithm and, by adding an integrity-checking feature, ensures that the keys haven’t been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP.t6TFSBVUIFOUJDBUJPOXIJDI JTHFOFSBMMZNJTTJOH JO8&1 UISPVHIUIFFYUFOTJCMFBVUIFOUJDBUJPOQSPUPDPM(EAP). WEP regulates access to a wireless network based on a computer’s hardware-specific MAC address, which is relatively simple to be snied out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network.WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point.WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network.
72D-Link DIR-605 User ManualSection 4 - SecurityWireless Connection Setup WizardTo run the security wizard, browse to the Setup page and then click the Wireless Connection Setup Wizard button. Click Next to continue.
73D-Link DIR-605 User ManualSection 4 - SecurityEnter the SSID (Service Set Identifier). The SSID is the name of your wireless network. Create a name using up to 32 characters. The SSID is case-sensitive.Select the level of security for your wireless network: t#FTU81""VUIFOUJDBUJPO t#FUUFS81""VUIFOUJDBUJPO t/POF/PTFDVSJUZClick Next to continue.If you selected Best or Better, enter a password between 8-63 characters. If you selected Good, enter 13 characters or 26 Hex digits. Click Next to continue.
74D-Link DIR-605 User ManualSection 4 - SecurityIf you selected Better, the following screen will show you your Pre-Shared Key to enter on your wireless clients. Click Save to nish the Security Wizard.If you selected Best, the following screen will show you your Pre-Shared Key to enter on your wireless clients. Click Save to nish the Security Wizard.If you selected WPA-Enterprise, the RADIUS information will be displayed. Click Save to nish the Security Wizard.
75D-Link DIR-605 User ManualSection 4 - SecurityFrom the Setup > Wireless Settings screen, click Add Wireless Device with WPS.Add Wireless Device with WPS WizardPIN: Select this option to use PIN method. In order to use this method you must know the wireless client’s 8 digit PIN and click Connect.PBC: Select this option to use PBC (Push Button) method to add a wireless client. Click Connect.Select Auto to add a wireless client using WPS (Wi-Fi Protected Setup). Once you select Auto and click Connect, you will have a 120 second time limit to apply the settings to your wireless client(s) and successfully establish a connection. If you select Manual, a settings summary screen will appear. Write down the security key and enter this on your wireless clients.
76D-Link DIR-605 User ManualSection 4 - SecurityCongure WPA-Personal (PSK)It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish XJSFMFTTDPOOFDUJWJUZ CFGPSFFOBCMJOHFODSZQUJPO:PVSXJSFMFTTTJHOBMNBZEFHSBEFXIFOFOBCMJOH FODSZQUJPOEVFUPthe added overhead.1. Log into the web-based conguration by opening a web browser and entering the IP address of the router (192.168.0.1). Click onSetup and then click Wireless Settings on the left side.2. Next to Security Mode, select WPA-Personal.3. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use Auto if you have wireless clients using both WPA and WPA2.4. Next to Cypher Type, select TKIP and AES, TKIP, or AES. If you have wireless clients that use both types, use TKIP and AES.5. Next to Group Key Update Interval, enter the amount of time before the group key used for broadcast and multicast data is changed (3600 is default).6. Next to Pre-Shared Key, enter a key (passphrase). The key is entered as a pass-phrase in ASCII format at both ends of the wireless connection. The pass-phrase must be between 8-63 characters. 7. Click Save Settings to save your settings. If you are conguring the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router.
77D-Link DIR-605 User ManualSection 4 - SecurityIt is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish XJSFMFTTDPOOFDUJWJUZ CFGPSFFOBCMJOHFODSZQUJPO:PVSXJSFMFTTTJHOBMNBZEFHSBEFXIFOFOBCMJOH FODSZQUJPOEVFUPthe added overhead.1. Log into the web-based conguration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Setup and then click Wireless Settings on the left side.2. Next to Security Mode, select WPA-Enterprise.3. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use Autoif you have wireless clients using both WPA and WPA2.4. Next to Cypher Type, select TKIP and AES, TKIP, or AES. If you have wireless clients that use both types, use TKIP and AES.5. Next to Group Key Update Interval, enter the amount of time before the group key used for broadcast and multicast data is changed (3600 is default).6. Next to Authentication Timeout, enter the amount of time before a client is required to re-authenticate (60 minutes is default). 7. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server.8. Next to RADIUS Server Port, enter the port you are using with your RADIUS server. 1812 is the default port.9. Next to RADIUS Server Shared Secret, enter the security key.Congure WPA-Enterprise (RADIUS)
78D-Link DIR-605 User ManualSection 4 - Security
79D-Link DIR-605 User ManualSection 5 - Connecting to a Wireless NetworkConnect to a Wireless NetworkUsing Windows Vista®Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows Vista® utility as seen below.Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. orThe utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.
80D-Link DIR-605 User ManualSection 5 - Connecting to a Wireless NetworkCongure WPA/WPA2It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.2. Highlight the wireless network (SSID) you would like to connect to and click Connect.1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network.
81D-Link DIR-605 User ManualSection 5 - Connecting to a Wireless Network3. Enter the same security key or passphrase that is on your router and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
82D-Link DIR-605 User ManualSection 5 - Connecting to a Wireless NetworkConnect Using WCN 2.0The router supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista®. The following instructions for setting this up depends on whether you are using Windows Vista® to congure the router or third party software. When you rst set up the router, Wi-Fi protection is disabled and uncongured. To enjoy the benets of Wi-Fi protection, the router must be both enabled and configured. There are three basic methods to accomplish this: use Windows Vista’s built-in support for WCN 2.0, use software provided by a third party, or manually congure. If you are running Windows Vista®, log into the router and click the Enable checkbox in the Basic > Wireless section. Use the Current PIN that is displayed on the Advanced > Wi-Fi Protected Setup section or choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are nished, proceed to the next section to set up the newly-congured router.
83D-Link DIR-605 User ManualSection 5 - Connecting to a Wireless NetworkUsing Windows® XPWindows® XP users may use the built-in wireless utility (Zero Conguration Utility). The following instructions are for Service Pack 2 users. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. orRight-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks.The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.
84D-Link DIR-605 User ManualSection 5 - Connecting to a Wireless NetworkCongure WPA-PSKIt is recommended to enable WEP on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used.2. Highlight the wireless network (SSID) you would like to connect to and click Connect.1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks.
85D-Link DIR-605 User ManualSection 5 - Connecting to a Wireless Network3. The Wireless Network Connection box will appear. Enter the WPA-PSK passphrase and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router.
86D-Link DIR-605 User ManualSection 6 - TroubleshootingTroubleshootingThis chapter provides solutions to problems that can occur during the installation and operation of the DIR-605. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If you have a dierent operating system, the screen shots on your computer will look similar to the following examples.)1. Why can’t I access the web-based conguration utility?When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. :PVSDPNQVUFSNVTUCFPOUIFTBNF*1TVCOFUUPDPOOFDUUPUIFXFCCBTFEVUJMJUZt.BLFTVSFZPVIBWFBOVQEBUFE+BWBFOBCMFEXFCCSPXTFS8FSFDPNNFOEUIFGPMMPXJOHt*OUFSOFU&YQMPSFSPSIJHIFSt/FUTDBQFPSIJHIFSt.P[JMMBPSIJHIFSt0QFSBPSIJHIFSt4BGBSJPSIJHIFSXJUI+BWBPSIJHIFSt$BNJOPPSIJHIFSt'JSFGPYPSIJHIFSt7FSJGZ QIZTJDBMDPOOFDUJWJUZCZDIFDLJOHGPSTPMJEMJOLMJHIUT POUIFEFWJDF*G ZPVEPOPUHFU BTPMJEMJOL MJHIUUSZVTJOHa dierent cable or connect to a dierent port on the device if possible. If the computer is turned o, the link light may not be on.t%JTBCMFBOZ*OUFSOFUTFDVSJUZTPGUXBSFSVOOJOHPO UIFDPNQVUFS4PGUXBSFGJSFXBMMTTVDIBT;POF"MBSN#MBDL*DFSygate, Norton Personal Firewall, and Windows® XP rewall may block access to the conguration pages. Check the help les included with your rewall software for more information on disabling or conguring it.
87D-Link DIR-605 User ManualSection 6 - Troubleshootingt$POöHVSFZPVS*OUFSOFUTFUUJOHTt(PUPStart > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.t$MJDLUIFConnection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK.t(PUPUIF Advanced tab and click the button to restore these settings to their defaults. Click OK three times.t$MPTFZPVSXFCCSPXTFSJGPQFOBOEPQFOJUt"DDFTTUIFXFCNBOBHFNFOU0QFOZPVSXFCCSPXTFSBOE FOUFSUIF*1BEESFTTPGZPVS%-JOLSPVUFSJOUIFBEESFTTbar. This should open the login page for your the web management. t*G ZPVTUJMMDBOOPUBDDFTTUIF DPOGJHVSBUJPOVOQMVHUIFQPXFSUPUIFSPVUFSGPSTFDPOETBOEQMVH CBDLJO8BJUabout 30 seconds and try accessing the conguration. If you have multiple computers, try connecting using a dierent computer.2. What can I do if I forgot my password?If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults.To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty.
88D-Link DIR-605 User ManualSection 6 - Troubleshooting3. Why can’t I connect to certain sites or send and receive e-mails when connecting through my router? If you are having a problem sending or receiving e-mail, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). Note: AOL DSL+ users must use MTU of 1400. To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be another computer, or a URL. t$MJDLPOStart and then click Run.t8JOEPXT® 95, 98, and Me users type in command (Windows® NT, 2000, and XP users type in cmd) and press Enter (or click OK).t0ODFUIFXJOEPXPQFOTZPVMMOFFEUPEPBTQFDJBMQJOH6TFUIFGPMMPXJOHTZOUBYping [url] [-f] [-l] [MTU value]Example: ping yahoo.com -f -l 1472
89D-Link DIR-605 User ManualSection 6 - Troubleshooting:PVTIPVMETUBSUBU BOEXPSLZPVSXBZEPXOCZFBDIUJNF0ODFZPVHFUBSFQMZ HPVQCZ VOUJMZPVHFUBfragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480). Once you nd your MTU, you can now congure your router with the proper MTU size. To change the MTU rate on your router follow the steps below: t0QFOZPVSCSPXTFSFOUFSUIF*1BEESFTTPGZPVSSPVUFSBOEDMJDLOK.t&OUFSZPVSVTFSOBNFBENJO BOEQBTTXPSECMBOLCZEFGBVMU $MJDL OK to enter the web conguration page for the device. t$MJDLPOSetup and then click Manual Congure.t5PDIBOHFUIF.56FOUFSUIFOVNCFSJOUIF.56öFMEBOEDMJDLSave Settings to save your settings. t5FTU ZPVSFNBJM*GDIBOHJOHUIF .56EPFTOPUSFTPMWFUIFQSPCMFNDPOUJOVFDIBOHJOHUIF.56JOincrements of ten.
90D-Link DIR-605 User ManualAppendix A - Wireless BasicsD-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want JU:PVXJMMCFBCMFUPFOKPZUIFGSFFEPNUIBUXJSFMFTTOFUXPSLJOHEFMJWFSTA wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more eciently. Increased mobility and the absence of cabling and other xed infrastructure have proven to be benecial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link.Wireless Basics
91D-Link DIR-605 User ManualAppendix A - Wireless BasicsWhat is Wireless?Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or oce network.Why D-Link Wireless?D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.How does wireless work?Wireless works similar to how cordless phone work, through radio signals to transmit data from one point "UPQPJOU##VUXJSFMFTTUFDIOPMPHZIBT SFTUSJDUJPOTBTUPIPXZPVDBO BDDFTTUIFOFUXPSL:PVNVTUCFwithin the wireless network range area to be able to connect your computer. There are two dierent types of wireless networks Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN).Wireless Local Area Network (WLAN)In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues.
92D-Link DIR-605 User ManualAppendix A - Wireless BasicsWireless Personal Area Network (WPAN)Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away.Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries.Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, oce, business, D-Link has a wireless solution for it.Homet (JWFTFWFSZPOFBUIPNFCSPBECBOEBDDFTTt 4VSGUIFXFCDIFDLFNBJMJOTUBOUNFTTBHFBOEFUDt (FUTSJEPGUIFDBCMFTBSPVOEUIFIPVTFt 4JNQMFBOEFBTZUPVTFSmall Oce and Home Ocet 4UBZPOUPQPGFWFSZUIJOHBUIPNFBTZPVXPVMEBUPóDFt 3FNPUFMZBDDFTTZPVSPóDFOFUXPSLGSPNIPNFt 4IBSF*OUFSOFUDPOOFDUJPOBOEQSJOUFSXJUINVMUJQMFDPNQVUFSTt /POFFEUPEFEJDBUFPóDFTQBDF
93D-Link DIR-605 User ManualAppendix A - Wireless BasicsWhere is wireless used? Wireless technology is expanding everywhere not just at home or oce. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coee Shops, Libraries, Restaurants, and Convention Centers.Wireless network is easy to setup, but if you’re installing it for the rst time it could be quite a task not knowing where to start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.TipsHere are a few things to keep in mind, when you install a wireless network.Centralize your router or Access PointMake sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range.Eliminate InterferencePlace home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would signicantly reduce any interference that the appliances might cause since they operate on same frequency.
94D-Link DIR-605 User ManualAppendix A - Wireless BasicsSecurityDon’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up.There are basically two modes of networking: tInfrastructure – All wireless clients will connect to an access point or wireless router.tAd-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more DIR-605 wireless network Cardbus adapters.An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate.Wireless Modes
95D-Link DIR-605 User ManualAppendix B - Networking BasicsNetworking BasicsCheck your IP addressAfter you install your adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.Click on Start > Run. In the run box type cmd and click OK. (Windows Vista® users type cmd in the Start Searchbox.)At the prompt, type ipcong and press Enter.This will display the IP address, subnet mask, and the default gateway of your adapter.If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters.
96D-Link DIR-605 User ManualAppendix B - Networking BasicsStatically Assign an IP addressIf you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:Step 1Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.Windows® XP - Click on Start > Control Panel > Network Connections.Windows® 2000 - From the desktop, right-click My Network Places > Properties.Step 2Right-click on the Local Area Connection which represents your network adapter and select Properties.Step 3Highlight Internet Protocol (TCP/IP) and click Properties.Step 4Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP.Step 5Click OK twice to save your settings.
98D-Link DIR-605 User ManualAppendix D - Contacting Technical SupportCopyright ©2008 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.CE Mark Warning:This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.FCC Statement:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures: t3FPSJFOUPSSFMPDBUFUIFSFDFJWJOHBOUFOOB t*ODSFBTFUIFTFQBSBUJPOCFUXFFOUIFFRVJQNFOUBOESFDFJWFS t$POOFDUUIFFRVJQNFOUJOUPBOPVUMFUPOBDJSDVJUEJòFSFOUGSPNUIBUUPXIJDIUIFSFDFJWFSJTDPOOFDUFE t$POTVMUUIFEFBMFSPSBOFYQFSJFODFESBEJP57UFDIOJDJBOGPSIFMQFor detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link oce.FCC Caution:Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
注 意 ! 依 據 低 功 率 電 波 輻 射 性 電 機 管 理 辦 法 第 十 二 條 經 型 式 認 證 合 格 之 低 功 率 射 頻 電 機 ， 非 經 許 可 ， 公 司 、 商 號 或 使 用 者 均 不 得擅 自 變 更 頻 率 、 加 大 功 率 或 變 更 原 設 計 之 特 性 及 功 能 。 第 十 四 條 低 功 率 射 頻 電 機 之 使 用 不 得 影 響 飛 航 安 全 及 干 擾 合 法 通 信 ； 經 發 現 有 干 擾 現象 時 ， 應 立 即 停 用 ， 並 改 善 至 無 干 擾 時 方 得 繼 續 使 用 。 前 項 合 法 通 信 ， 指 依 電 信 規 定 作 業 之 無 線 電 信 。 低 功 率 射 頻 電 機 須 忍 受 合 法 通 信 或 工業 、 科 學 及 醫 療 用 電 波 輻 射 性 電 機 設 備 之 干 擾 。 IC EMI(ICES-003) "This Class B digital apparatus complies with Canadian ICES-003." "Cet appareil numérique de la classe Class B est conforme à la norme NMB-003 du Canada." Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu