D Link DIR628A2 RangeBooster N Dual Band Router User Manual 5

Download:
Mirror Download [FCC.gov]
Document ID	1222404
Application ID	k87k8TY7FWOxm4LG9wH7aQ==
Document Description	User manual 5
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	289.95kB (3624379 bits)
Date Submitted	2010-01-04 00:00:00
Date Available	2010-04-16 00:00:00
Creation Date	2009-12-29 17:18:47
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2009-12-29 17:18:52
Document Title	User manual 5
Document Creator	Adobe InDesign CS2 (4.0.5)

Section 3 - Configuration
Email Settings
The Email feature can be used to send the system log files, router alert messages, and firmware update notification
to your email address.
Enable Email When this option is enabled, router activity logs
Notification: are e-mailed to a designated email address.
From Email This email address will appear as the sender
Address: when you receive a log file or firmware upgrade
notification via email.
To Email Address: Enter the email address where you want the
email sent.
SMTP Server Enter the SMTP server address for sending email.
Address: If your SMTP server requires authentication,
select this option.
Enable Check this box if your SMTP server requires
Authentication: authentication.
Account Name: Enter your account for sending email.
Password: Enter the password associated with the account.
Re-type the password associated with the
account.
On Log Full: When this option is selected, logs will be sent
via email when the log is full.
On Schedule: Selecting this option will send the logs via email according to schedule.
Schedule: This option is enabled when On Schedule is selected. You can select a schedule from the list of defined schedules. To create
a schedule, go to Tools > Schedules.
D-Link DIR-628 User Manual
58
Section 3 - Configuration
System Settings
Save Settings to Use this option to save the current router
Local Hard Drive: configuration settings to a file on the hard disk
of the computer you are using. First, click the
Save button. You will then see a file dialog,
where you can select a location and file name
for the settings.
Load Settings Use this option to load previously saved
from Local Hard router configuration settings. First, use the
Drive: Browse control to find a previously save file
of configuration settings. Then, click the Load
button to transfer those settings to the router.
Restore to Factory This option will restore all configuration settings
Default Settings: back to the settings that were in effect at the
time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router configuration
settings, use the Save button above.
Reboot Device: Click to reboot the router.
D-Link DIR-628 User Manual
59
Section 3 - Configuration
Update Firmware
You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of
the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support
site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the
D-Link support site.
Firmware Click on Check Online Now for Latest Firmware
Upgrade: Version to find out if there is an updated firmware;
if so, download the new firmware to your hard
drive.
Browse: After you have downloaded the new firmware,
click Browse to locate the firmware update on
your hard drive. Click Upload to complete the
firmware upgrade.
Notifications Check Automatically Check Online for Latest
Options: Firmware Version to have the router check
automatically to see if there is a new firmware
upgrade.
Check Email Notification of Newer Firmware
Version to have the router send an email when
there is a new firmware available.
D-Link DIR-628 User Manual
60
Section 3 - Configuration
DDNS
The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have
purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet
Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in
your domain name to connect to your server no matter what your IP address is.
DDNS: Dynamic Domain Name System is a method of
keeping a domain name linked to a changing IP
Address. Check the box to enable DDNS.
Server Address: Choose your DDNS provider from the drop
down menu.
Host Name: Enter the Host Name that you registered with
your DDNS service provider.
Username or Key: Enter the Username for your DDNS account.
Password or Key: Enter the Password for your DDNS account.
Timeout: Enter a time (in hours).
Status: Displays the current status - Connected or
Disconnected.
D-Link DIR-628 User Manual
61
Section 3 - Configuration
System Check
Ping Test: The Ping Test is used to send Ping packets to test if a
computer is on the Internet. Enter the IP Address that you
wish to Ping, and click Ping.
Ping Results: The results of your ping attempts will be displayed here.
D-Link DIR-628 User Manual
62
Section 3 - Configuration
Schedules
Name: Enter a name for your new schedule.
Days: Select a day, a range of days, or All Week to
include every day.
Time: Check All Day - 24hrs or enter a start and end
time for your schedule.
Save: Click Save to save your schedule. You must click
Save Settings at the top for your schedules to go
into effect.
Schedule Rules The list of schedules will be listed here. Click the
List: Edit icon to make changes or click the Delete
icon to remove the schedule.
D-Link DIR-628 User Manual
63
Section 3 - Configuration
Device Information
This page displays the current information for the DIR-628. It will display the LAN, WAN (Internet), and Wireless
information.
If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be
displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use
Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection.
General: Displays the router’s time and firmware version.
WAN: Displays the MAC address and the public IP settings for the router.
LAN: Displays the MAC address and the private (local) IP settings for the
router.
Wireless LAN: Displays the wireless MAC address and your wireless settings such as
SSID and Channel.
LAN Computers: Displays computers and devices that are connected to the router via
Ethernet and that are receiving an IP address assigned by the router
(DHCP).
D-Link DIR-628 User Manual
64
Section 3 - Configuration
Log
The router automatically logs (records) events of possible interest in it’s internal memory. If there isn’t enough internal
memory for all events, logs of older events are deleted but logs of the latest events are retained. The Logs option allows
you to view the router logs. You can define what types of events you want to view and the level of the events to view.
This router also has external Syslog Server support so you can send the log files to a computer on your network that
is running a Syslog utility.
What to View: You can select the types of messages that you want
to display from the log. Firewall & Security, System,
and Router Status messages can be selected.
View Levels: There are three levels of message importance:
Informational, Warning, and Critical. Select the
levels that you want displayed in the log.
Apply Log Will filter the log results so that only the selected
Settings: options appear.
Refresh: Updates the log details on the screen so it displays
any recent activity.
Clear: Clears all of the log contents.
Email Now: This option will send a copy of the router log to
the email address configured in the Tools > Email
screen.
Save Log: This option will save the router to a log file on your
computer.
D-Link DIR-628 User Manual
65
Section 3 - Configuration
Stats
The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-628 on
both the WAN and the LAN ports. The traffic counter will reset if the device is rebooted.
D-Link DIR-628 User Manual
66
Section 3 - Configuration
Internet Sessions
The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a
conversation between a program or application on a LAN-side computer and a program or application on a WAN-side
computer.
Local: The IP address and, where appropriate,
port number of the local application.
NAT: The por t number of the LAN-side
application as viewed by the WAN-side
application.
Internet: The IP address and, where appropriate,
port number of the application on the
Internet.
Protocol: The communications protocol used for
the conversation.
State: State for sessions that use the TCP
protocol:
NO: None -- This entry is used as a
placeholder for a future connection that
may occur.
SS: SYN Sent -- One of the systems is
attempting to start a connection.
EST: Established -- the connection is passing data.
FW: FIN Wait -- The client system has requested that the connection be stopped.
CW: Close Wait -- The server system has requested that the connection be stopped.
TW: Time Wait -- Waiting for a short time while a connection that was in FIN Wait is fully closed.
LA: Last ACK -- Waiting for a short time while a connection that was in Close Wait is fully closed.
CL: Closed -- The connection is no longer active but the session is being tracked in case there are any retransmitted packets
still pending.
D-Link DIR-628 User Manual
67
Section 3 - Configuration
Dir: The direction of initiation of the conversation:
Out - Initiated from LAN to WAN.
In - Initiated from WAN to LAN.
Priority: The preference given to outbound packets of this conversation by the QoS Engine logic. Smaller numbers represent higher
priority.
Time Out: The number of seconds of idle time until the router considers the session terminated. The initial value of Time Out depends
on the type and state of the connection.
300 seconds - UDP connections.
240 seconds - Reset or closed TCP connections. The connection does not close instantly so that lingering packets
can pass or the connection can be re-established.
7800 seconds - Established or closing TCP connections.
D-Link DIR-628 User Manual
68

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2009:12:29 17:18:52+08:00
Create Date                     : 2009:12:29 17:18:47+08:00
Metadata Date                   : 2009:12:29 17:18:52+08:00
Creator Tool                    : Adobe InDesign CS2 (4.0.5)
Format                          : application/pdf
Document ID                     : uuid:87453555-530b-493c-a939-f655d11afcb3
Instance ID                     : uuid:4d74a372-d1e1-44e6-bc8c-7494da8645bd
Producer                        : Adobe PDF Library 7.0
Page Count                      : 11
Creator                         : Adobe InDesign CS2 (4.0.5)

EXIF Metadata provided by EXIF.tools