D Link DIR655A4 Xtreme N GIGABIT ROUTER User Manual User s manual rev 2

D Link Corporation Xtreme N GIGABIT ROUTER User s manual rev 2

DIR655A4 User Manual PDF Download & Text

Manual

Download:
Mirror Download [FCC.gov]
Document ID	965053
Application ID	U5FYCHxCP1B0WOKu97RlUw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	397.44kB (4968000 bits)
Date Submitted	2008-07-03 00:00:00
Date Available	2008-07-03 00:00:00
Creation Date	2008-07-03 13:58:18
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2008-07-03 14:02:54
Document Title	User's manual rev.2.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	WendyLiao

D-Link DIR-655 User Manual
Conﬁguration ............................................................. 12
Web-based Conﬁguration Utility ............................ 12
Setup Wizard ................................................... 13
Manual Conﬁguration....................................... 17
Dynamic (Cable)........................................... 17
PPPoE (DSL) ............................................... 18
PPTP............................................................ 19
L2TP............................................................. 21
Static (assigned by ISP) ............................... 23
Big Pond....................................................... 24
Wireless Settings ............................................. 25
Network Settings.............................................. 27
DHCP Server Settings ................................. 28
DHCP Reservation....................................... 29
Installation.................................................................... 9
Before you Begin ..................................................... 9
Wireless Installation Considerations...................... 10
Getting Started ...................................................... 11
Virtual Server ................................................... 30
Port Forwarding ............................................... 32
Application Rules ............................................. 33
QoS Engine ..................................................... 34
Network Filters................................................. 35
Access Control................................................. 36
Access Control Wizard ................................. 36
Website Filters ................................................. 39
Inbound Filters ................................................. 40
Firewall Settings............................................... 41
Application Level Gateway (ALG)
Conﬁguration.................................................... 42
VPN Passthrough......................................... 42
RTSP............................................................ 42
H.323............................................................ 42
SIP (VoIP)..................................................... 42
MMS............................................................. 42
Advanced Wireless Settings ............................ 43
Transmit Power............................................. 43
802.11d Mode .............................................. 43
WISH Settings ................................................. 44
Advanced Network Settings............................. 46
UPnP............................................................ 46
Internet Ping Block ....................................... 46
Internet Port Speed ...................................... 46
Multicast Streams......................................... 46
Table of Contents
Product Overview ........................................................ 4
Package Contents.................................................... 4
System Requirements ............................................. 4
Introduction .............................................................. 5
Features................................................................... 6
Hardware Overview ................................................. 7
Connections....................................................... 7
LEDs .................................................................. 8
Table of Contents
D-Link DIR-655 User Manual
Connect to a Wireless Network ................................ 70
Using Windows® XP............................................... 70
Conﬁgure WEP ...................................................... 71
Wireless Security....................................................... 61
What is WEP?........................................................ 61
What is WPA? ........................................................ 62
Wireless Security Setup Wizard ............................ 63
Conﬁgure WEP ...................................................... 66
Conﬁgure WPA-Personal (PSK)............................. 67
Conﬁgure WPA-Enterprise (RADIUS).................... 68
Administrator Settings...................................... 47
Change Password ........................................ 47
Remote Management................................... 47
Time Settings................................................... 48
SysLog............................................................. 49
Email Settings.................................................. 50
System Settings............................................... 51
Update Firmware ............................................. 52
DDNS............................................................... 53
System Check.................................................. 54
Schedules ........................................................ 55
Device Information ........................................... 56
Log................................................................... 57
Stats................................................................. 58
Active Sessions................................................ 58
Wireless ........................................................... 59
WISH ............................................................... 59
Support ............................................................ 60
Table of Contents
Registration................................................................ 94
Warranty ..................................................................... 88
Contacting Technical Support .................................. 87
Technical Speciﬁcations........................................... 86
Networking Basics .................................................... 84
Check your IP address .......................................... 84
Statically Assign an IP address ............................. 85
Wireless Basics ......................................................... 79
What is Wireless? .................................................. 80
Tips ........................................................................ 82
Wireless Modes ..................................................... 83
Troubleshooting......................................................... 75
Conﬁgure WPA-PSK .............................................. 73
Product
PackageOverview
Contents
D-Link DIR-655 User Manual
• Ethernet-based Cable or DSL Modem
• Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet
adapter
• Internet Explorer Version 6.0, Mozilla 1.7.12 (5.0), or Firefox 1.5 and above (for conﬁguration)
• Installation Wizard requires Windows® XP with Service Pack 2
System Requirements
Note: Using a power supply with a different voltage rating than the one included
with the DIR-655 will cause damage and void the warranty for this product.
• D-Link DIR-655 Xtreme N™ Router
• 3 Detachable Antennas
• Power Adapter
• CAT5 Ethernet Cable
• CD-ROM with Installation Wizard, User Manual,
and Special Offers
Section 1 - Product Overview
Introduction
D-Link DIR-655 User Manual
* Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n speciﬁcations. Actual data throughput will vary. Network conditions and
environmental factors, including volume of network trafﬁc, building materials and construction, and network overhead, lower actual data throughput rate. Environmental
conditions will adversely affect wireless signal range.
The Xtreme N™ Router supports all of the latest wireless security features to prevent unauthorized access, be it from over the
wireless network or from the Internet. Support for WPA and WEP standards ensure that you’ll be able to use the best possible
encryption method, regardless of your client devices. In addition, this Xtreme N™ Router utilizes dual active ﬁrewalls (SPI and
NAT) to prevent potential attacks from across the Internet.
TOTAL NETWORK SECURITY
Powered by Xtreme N™ technology, this high performance router provides superior Whole Home Coverage while reducing dead
spots. The Xtreme N™ Router is designed for use in bigger homes and for users who demand higher performance networking.
Add a Xtreme N™ notebook or desktop adapter and stay connected to your network from virtually anywhere in your home.
EXTENDED WHOLE HOME COVERAGE
The D-Link Xtreme N™ Router (DIR-655) is a draft 802.11n compliant device that delivers real world performance of up to
650% faster than an 802.11g wireless connection (also faster than a 100Mbps wired Ethernet connection). Create a secure
wireless network to share photos, ﬁles, music, video, printers, and network storage throughout your home. Connect the Xtreme
N™ Router to a cable or DSL modem and share your high-speed Internet access with everyone on the network. In addition,
this Router includes a Quality of Service (QoS) engine that keeps digital phone calls (VoIP) and online gaming smooth and
responsive, providing a better Internet experience.
ULTIMATE PERFORMANCE
Provides greater wireless signal rates even at farther distances for best-in-class Whole Home Coverage.
TOTAL COVERAGE
The most complete set of security features including Active Firewall and WPA2 to protect your network against outside
intruders
TOTAL SECURITY
Combines award winning router features and Draft 802.11n wireless technology to provide the best wireless performance
TOTAL PERFORMANCE
Section 1 - Product Overview
Features
D-Link DIR-655 User Manual
* Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n speciﬁcations. Actual data throughput will vary. Network conditions and
environmental factors, including volume of network trafﬁc, building materials and construction, and network overhead, lower actual data throughput rate. Environmental
conditions will adversely affect wireless signal range.
• User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DIR-655 lets you
control what information is accessible to those on the wireless network, whether from the Internet or from
your company’s server. Conﬁgure your router to your speciﬁc settings within minutes.
• Secure Multiple/Concurrent Sessions - The DIR-655 can pass through VPN sessions. It
supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-655
can securely access corporate networks.
• Filter Scheduling - These ﬁlters can be scheduled to be active on certain days or for a
duration of hours or minutes.
• Content Filtering - Easily applied content ﬁltering based on MAC Address, URL, and/or
Domain Name.
• Advanced Firewall Features - The Web-based user interface displays a number of advanced network
management features including:
• Compatible with 802.11b and 802.11g Devices - The DIR-655 is still fully compatible with the IEEE
802.11b standard, so it can connect with existing 802.11b PCI, USB and Cardbus adapters.
• Faster Wireless Networking - The DIR-655 provides up to 300Mbps* wireless connection with other
802.11n wireless clients. This capability allows users to participate in real-time activities online, such as
video streaming, online gaming, and real-time audio. The performance of this 802.11n wireless router
gives you the freedom of wireless networking at speeds 650% faster than 802.11g.
Section 1 - Product Overview
D-Link DIR-655 User Manual
Power Receptor
Receptor for the supplied power
adapter.
Reset
Pressing the Reset button restores the router to
its original factory default settings.
Internet Port
The auto MDI/MDIX Internet port is
the connection for the Ethernet cable
to the cable or DSL modem.
USB
Connect a USB 1.1 or 2.0 ﬂash
drive to conﬁgure the wireless
settings using WCN.
Connections
Hardware Overview
LAN Ports (1-4)
Connect Ethernet devices such as
computers, switches, and hubs.
Section 1 - Product Overview
D-Link DIR-655 User Manual
Power LED
A solid light indicates a
proper connection to the
power supply.
Status LED
A blinking light indicates that the
DIR-655 is ready.
WLAN LED
A solid light indicates that the wireless
segment is ready. This LED blinks
during wireless data transmission.
Local Network LEDs
A solid light indicates a connection to an
Ethernet-enabled computer on ports 1-4.
This LED blinks during data transmission.
WCN LED
Insert a USB ﬂash drive with WCN
information. The LED will blink 3 times
if it successfully transfers the wireless
settings.
LEDs
Hardware Overview
Internet LED
A solid light indicates connection on the
Internet port. This LED blinks during
data transmission.
Section 1 - Product Overview
Installation
D-Link DIR-655 User Manual
If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as
WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.
Please conﬁgure the router with the computer that was last connected directly to your modem. Also, you can only use
the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off
your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn
the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet).
Before you Begin
This section will walk you through the installation process. Placement of the router is very important. Do not place the
router in an enclosed area such as a closet, cabinet, or in the attic or garage.
Section 2 - Installation
Wireless Installation Considerations
D-Link DIR-655 User Manual
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and
home security systems), your wireless connection may degrade dramatically or drop completely. Make
sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits
a signal even if the phone in not in use.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that
generate RF noise.
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on
range. Try to position access points, wireless routers, and computers so that the signal passes through
drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water
(ﬁsh tanks), mirrors, ﬁle cabinets, brick, and concrete will degrade your wireless signal.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a
45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet
(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead
of at an angle) for better reception.
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum
- each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices
so that the number of walls or ceilings is minimized.
10
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within
the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls,
ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending
on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing
wireless range is to follow these basic guidelines:
Section 2 - Installation
Getting Started
D-Link DIR-655 User Manual
11
Note: It is reccomended to write down the SSID and Security Key, followed by the login password on the provided CD
holder.
Click Install Router
When the autorun screen appears, click Install Router.
If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type
“D:\DIR655.exe” (where D: represents the drive letter of your CD-ROM drive).
Insert the Quick Router Setup Wizard CD in the CD-ROM drive. The step-by-step instructions that follow are shown
in Windows® XP. The steps and screens are similar for the other Windows operating systems.
The DIR-655 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to
guide you quickly through the installation process.
Section 2 - Installation
Conﬁguration
D-Link DIR-655 User Manual
If you get a Page Cannot be Displayed error, please
refer to the Troubleshooting section for assistance.
Select Admin from the drop-down menu and then enter
your password. Leave the password blank by default.
To access the conﬁguration utility, open a web-browser
such as Internet Explorer and enter the IP address of
the router (192.168.0.1).
Web-based Conﬁguration Utility
12
This section will show you how to conﬁgure your new D-Link wireless router using the web-based conﬁguration
utility.
Section 3 - Conﬁguration
Setup Wizard
D-Link DIR-655 User Manual
If you want to conﬁgure your wireless settings, click Launch Wireless
Security Setup Wizard and skip to page 62.
Click Launch Internet Connection Setup Wizard to begin.
If you want to enter your settings without running the wizard, click
Manual Conﬁguration and skip to page 19.
You may click Setup Wizard to quickly conﬁgure your router.
Section 3 - Conﬁguration
13
D-Link DIR-655 User Manual
Select the type of Internet connection you use and then click Next
to continue.
Select your time zone from the drop-down menu and then click Next
to continue.
Create a new password and then click Next to continue.
Click Next to continue.
Section 3 - Conﬁguration
14
D-Link DIR-655 User Manual
If you selected PPTP, enter your PPTP username and password. Click Next
to continue.
Note: Make sure to remove your PPPoE software from your computer. The
software is no longer needed and will not work through a router.
Select Static if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses.
If you selected PPPoE, enter your PPPoE username and password. Click
Next to continue.
The Host Name is optional but may be required by some ISPs. The default
host name is the device name of the Router and may be changed.
If you selected Dynamic, you may need to enter the MAC address of the
computer that was last connected directly to your modem. If you are currently
using that computer, click Clone Your PC’s MAC Address and then click
Next to continue.
Section 3 - Conﬁguration
15
D-Link DIR-655 User Manual
Close your browser window and reopen it to test your Internet connection.
It may take a few tries to initially connect to the Internet.
Click Connect to save your settings. Once the router is ﬁnished rebooting,
click Continue. Please allow 1-2 minutes to connect.
If you selected Static, enter your network settings supplied by your Internet
provider. Click Next to continue.
If you selected L2TP, enter your L2TP username and password. Click Next
to continue.
Section 3 - Conﬁguration
16
Dynamic (Cable)
Manual Conﬁguration
D-Link DIR-655 User Manual
MAC Address: The default MAC Address is set to the Internet
port’s physical interface MAC address on the
Broadband Router. It is not recommended that
you change the default MAC address unless
required by your ISP. You can use the Clone
Your PC’s MAC Address button to replace
the Internet port’s MAC address with the MAC
address of your Ethernet card.
MTU: Maximum Transmission Unit - you may need to
change the MTU for optimal performance with
your speciﬁc ISP. 1500 is the default MTU.
DNS Addresses: Enter the Primary DNS server IP address
assigned by your ISP.
Use Unicasting: Check the box if you are having problems
obtaining an IP address from your ISP.
Host Name: The Host Name is optional but may be required
by some ISPs.
My Internet Select Dynamic IP (DHCP) to obtain IP Address
Connection: information automatically from your ISP. Select
this option if your ISP does not give you any IP
numbers to use. This option is commonly used
for Cable modem services.
Section 3 - Conﬁguration
17
PPPoE (DSL)
Internet Setup
D-Link DIR-655 User Manual
18
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s
MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your speciﬁc ISP. 1492 is
the default MTU.
DNS Addresses: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature,
enable Auto-reconnect.
Maximum Idle Time: Enter the Primary and Secondary DNS Server Addresses (Static PPPoE
only).
Reconnection Mode: Select either Always-on, On-Demand, or Manual.
Service Name: Enter the ISP Service Name (optional).
Password: Enter your PPPoE password and then retype the password in the next
box.
User Name: Enter your PPPoE user name.
IP Address: Enter the IP address (Static PPPoE only).
Address Mode: Select Static if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic.
My Internet Select PPPoE (Username/Password) from the drop-down menu.
Connection:
Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide
you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE
software from your computer. The software is no longer needed and will not work through a router.
Section 3 - Conﬁguration
PPTP
Internet Setup
D-Link DIR-655 User Manual
DNS Servers: The DNS server information will be supplied by your ISP
(Internet Service Provider.)
Maximum Idle Enter a maximum idle time during which the Internet
Time: connection is maintained during inactivity. To disable this
feature, enable Auto-reconnect.
Reconnect Mode: Select either Always-on, On-Demand, or Manual.
Password: Enter your PPTP password and then retype the password
in the next box.
Username: Enter your PPTP username.
PPTP Server IP: Enter the Server IP provided by your ISP (optional).
PPTP Gateway: Enter the Gateway IP Address provided by your ISP.
PPTP Subnet Enter the Primary and Secondary DNS Server Addresses
Mask: (Static PPTP only).
PPTP IP Address: Enter the IP address (Static PPTP only).
Address Mode: Select Static if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In most
cases, select Dynamic.
19
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with
a username and password. This option is typically used for DSL services.
Section 3 - Conﬁguration
D-Link DIR-655 User Manual
20
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s
MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your speciﬁc ISP. 1400 is
the default MTU.
Section 3 - Conﬁguration
L2TP
Internet Setup
D-Link DIR-655 User Manual
DNS Servers: Enter the Primary and Secondary DNS Server Addresses
(Static L2TP only).
Maximum Idle Time: Enter a maximum idle time during which the Internet
connection is maintained during inactivity. To disable this
feature, enable Auto-reconnect.
Reconnect Mode: Select either Always-on, On-Demand, or Manual.
Password: Enter your L2TP password and then retype the password
in the next box.
Username: Enter your L2TP username.
L2TP Server IP: Enter the Server IP provided by your ISP (optional).
L2TP Gateway: Enter the Gateway IP Address provided by your ISP.
L2TP Subnet Mask: Enter the Subnet Mask supplied by your ISP (Static
only).
L2TP IP Address: Enter the L2TP IP address supplied by your ISP (Static
only).
Address Mode: Select Static if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In
most cases, select Dynamic.
21
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
Section 3 - Conﬁguration
D-Link DIR-655 User Manual
22
Clone MAC The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not
Address: recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s
MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your speciﬁc ISP. 1400 is the
default MTU.
Section 3 - Conﬁguration
Static (assigned by ISP)
Internet Setup
D-Link DIR-655 User Manual
MAC Address: The default MAC Address is set to the Internet port’s
physical interface MAC address on the Broadband
Router. It is not recommended that you change the
default MAC address unless required by your ISP.
You can use the Clone Your PC’s MAC Address
button to replace the Internet port’s MAC address
with the MAC address of your Ethernet card.
MTU: Maximum Transmission Unit - you may need to
change the MTU for optimal performance with your
speciﬁc ISP. 1500 is the default MTU.
DNS Servers: The DNS server information will be supplied by your
ISP (Internet Service Provider.)
Default Gateway: Enter the Gateway assigned by your ISP.
Subnet Mask: Enter the Subnet Mask assigned by your ISP.
IP Address: Enter the IP address assigned by your ISP.
23
Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP address,
subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the ﬁelds must be in the
appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
Section 3 - Conﬁguration
D-Link DIR-655 User Manual
MAC Address: The default MAC Address is set to the
Internet’s physical interface MAC address on
the Broadband Router. It is not recommended
that you change the default MAC address
unless required by your ISP. You can use the
Clone Your PC’s MAC Address button to
replace the Internet port’s MAC address with
the MAC address of your Ethernet card.
MTU: Maximum Transmission Unit - you may need to
change the MTU for optimal performance with
your speciﬁc ISP. 1500 is the default MTU.
DNS Servers: The DNS server information will be supplied
by your ISP (Internet Service Provider.)
Big Pond
Internet Setup
BigPond Password: Enter your BigPond password and then retype
the password in the next box.
BigPond Username: Enter your BigPond username.
BigPond Server: Enter the IP address of the login server.
Section 3 - Conﬁguration
24
Wireless Settings
D-Link DIR-655 User Manual
Transmission Rate: Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance.
Channel Width: Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
802.11 Mode: Select one of the following:
802.11g Only - Select if all of your wireless clients are 802.11g.
Mixed 802.11g and 802.11b - Select if you are using both 802.11b and 802.11g wireless clients.
802.11b Only - Select if all of your wireless clients are 802.11b.
802.11n Only - Select only if all of your wireless clients are 802.11n.
Mixed 802.11n, 802.11b, and 802.11g - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.
Wireless Channel: Indicates the channel setting for the DIR-655. By default the
channel is set to 6. The Channel can be changed to ﬁt the channel
setting for an existing wireless network or to customize the
wireless network. If you enable Auto Channel Scan, this option
will be greyed out.
Enable Auto The Auto Channel Scan setting can be selected to allow
Channel Scan: the DIR-655 to choose the channel with the least amount of
interference.
Wireless Network Service Set Identiﬁer (SSID) is the name of your wireless network.
Name: Create a name using up to 32 characters. The SSID is casesensitive.
Enable Wireless: Check the box to enable the wireless function. If you do not
want to use wireless, uncheck the box to disable all the wireless
functions.
Section 3 - Conﬁguration
25
D-Link DIR-655 User Manual
Wireless Security: Refer to page 60 for more information regarding wireless security.
26
Visibility Status: Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-655. If Invisible is selected,
the SSID of the DIR-655 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your
DIR-655 in order to connect to it.
Section 3 - Conﬁguration
Network Settings
D-Link DIR-655 User Manual
Enable DNS Relay: Uncheck the box to transfer the DNS server
information from your ISP to your computers. If
checked, your computers will use the router for a
DNS server.
Local Domain: Enter the Domain name (Optional).
Subnet Mask: Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
If you change the IP address, once you click Apply,
you will need to enter the new IP address in your
browser to get back into the conﬁguration utility.
IP Address: Enter the IP address of the router. The default IP
address is 192.168.0.1.
This section will allow you to change the local network settings of the router and to conﬁgure the DHCP settings.
Section 3 - Conﬁguration
27
DHCP Server Settings
D-Link DIR-655 User Manual
Add DHCP Refer to the next page for the DHCP Reservation
Reservation: function.
Lease Time: The length of time for the IP address lease.
Enter the Lease time in minutes.
Note: If you statically (manually) assign IP
addresses to your computers or devices, make
sure the IP addresses are outside of this range
or you may have an IP conﬂict.
DHCP IP Address Enter the starting and ending IP addresses for
Range: the DHCP server’s IP assignment.
Enable DHCP Check this box to enable the DHCP server on
Server: your router. Uncheck to disable this function.
28
DHCP stands for Dynamic Host Control Protocol. The DIR-655 has a built-in DHCP server. The DHCP Server will
automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be
DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers
on, they will automatically load the proper TCP/IP settings provided by the DIR-655. The DHCP Server will automatically
allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and
ending address of the IP address pool.
Section 3 - Conﬁguration
DHCP Reservation
D-Link DIR-655 User Manual
Save: Click Save to save your entry. You must click
Save Settings at the top to activate your
reservations.
Copy Your PC’s If you want to assign an IP address to the
MAC Address: computer you are currently on, click this button
to populate the ﬁelds.
MAC Address: Enter the MAC address of the computer or
device.
IP Address: Enter the IP address you want to assign to the
computer or device. This IP Address must be
within the DHCP IP Address Range.
Computer Name: Enter the computer name or select from the
drop-down menu and click <<.
Enable: Check this box to enable the reservation.
Note: This IP address must be within the DHCP IP Address Range.
29
If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation.
The router will assign the IP address only to that computer or device.
Section 3 - Conﬁguration
Virtual Server
D-Link DIR-655 User Manual
For a list of ports for common applications, please visit http://support.dlink.com/faq/view.asp?prod_id=1191.
30
Each virtual service that is created will be listed at the bottom of the screen in the Virtual Servers List. There are
pre-deﬁned virtual services already in the table. You may use them by enabling them and assigning the server IP to
use that particular virtual service.
The DIR-655 is also capable of port-redirection meaning incoming trafﬁc to a particular port may be redirected to a
different port on the server computer.
The DIR-655 ﬁrewall feature ﬁlters out unrecognized packets to protect your LAN network so all computers networked
with the DIR-655 are invisible to the outside world. If you wish, you can make some of the LAN computers accessible
from the Internet by enabling Virtual Server. Depending on the requested service, the DIR-655 redirects the external
service request to the appropriate server within the LAN network.
The DIR-655 can be conﬁgured as a virtual server so that remote users accessing Web or FTP services via the public
IP address can be automatically redirected to local servers in the LAN (Local Area Network).
Section 3 - Conﬁguration
D-Link DIR-655 User Manual
Schedule: The schedule of time when the Virtual Server
Rule will be enabled. The schedule may be set to
Always, which will allow the particular service to
always be enabled. You can create your own times
in the Tools > Schedules section.
Inbound Filter: Select Allow All (most common) or a created
Inbound ﬁlter. You may create your own inbound
ﬁlters in the Advanced > Inbound Filter page.
Protocol Type: Select TCP, UDP, or Both from the drop-down
menu.
Private Port/ Enter the port that you want to open next to Private
Public Port: Port and Public Port. The private and public ports
are usually the same. The public port is the port
seen from the Internet side, and the private port
is the port being used by the application on the
computer within your local network.
IP Address: Enter the IP address of the computer on your
local network that you want to allow the incoming
service to. If your computer is receiving an IP
address automatically from the router (DHCP),
you computer will be listed in the “Computer
Name” drop-down menu. Select your computer
and click <<.
Name: Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click << to populate the ﬁelds.
This will allow you to open a single port. If you would like to open a range of ports, refer to page 33.
Section 3 - Conﬁguration
31
Port Forwarding
D-Link DIR-655 User Manual
Schedule: The schedule of time when the Virtual Server Rule
will be enabled. The schedule may be set to Always,
which will allow the particular service to always be
enabled. You can create your own times in the Tools
> Schedules section.
Inbound Filter: Select Allow All (most common) or a created
Inbound ﬁlter. You may create your own inbound
ﬁlters in the Advanced > Inbound Filter page.
Example: 24,1009,3000-4000
TCP/UDP: Enter the TCP and/or UDP port or ports that you
want to open. You can enter a single port or a range
of ports. Seperate ports with a common.
IP Address: Enter the IP address of the computer on your local
network that you want to allow the incoming service
to. If your computer is receiving an IP address
automatically from the router (DHCP), you computer
will be listed in the “Computer Name” drop-down
menu. Select your computer and click <<.
Name: Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click << to populate the ﬁelds.
This will allow you to open a single port or a range of ports.
Section 3 - Conﬁguration
32
Application Rules
D-Link DIR-655 User Manual
Schedule: The schedule of time when the Application Rule
will be enabled. The schedule may be set to
Always, which will allow the particular service
to always be enabled. You can create your own
times in the Tools > Schedules section.
Trafﬁc Type: Select the protocol of the ﬁrewall port (TCP,
UDP, or Both).
Firewall: This is the port number on the Internet side
that will be used to access the application. You
may deﬁne a single port or a range of ports.
You can use a comma to add multiple ports or
port ranges.
Trafﬁc Type: Select the protocol of the trigger port (TCP,
UDP, or Both).
Trigger: This is the port used to trigger the application. It
can be either a single port or a range of ports.
Name: Enter a name for the rule. You may select a
pre-deﬁned application from the drop-down
menu and click <<.
33
The DIR-655 provides some predeﬁned applications in the table on the bottom of the web page. Select the application
you want to use and enable it.
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and
others. These applications have difﬁculties working through NAT (Network Address Translation). Special Applications
makes some of these applications work with the DIR-655. If you need to run applications that require multiple connections,
specify the port normally associated with an application in the “Trigger Port” ﬁeld, select the protocol type as TCP or
UDP, then enter the ﬁrewall (public) ports associated with the trigger port to open them for inbound trafﬁc.
Section 3 - Conﬁguration
QoS Engine
D-Link DIR-655 User Manual
Detected xDSL: When Connection Type is set to automatic, the automatically detected connection type is displayed here.
34
Connection Type: By default, the router automatically determines whether the underlying connection is an xDSL/Frame-relay network or some
other connection type (such as cable modem or Ethernet), and it displays the result as Detected xDSL or Frame Relay Network.
If you have an unusual network connection in which you are actually connected via xDSL but for which you conﬁgure either
“Static” or “DHCP” in the Internet settings, setting this option to xDSL or Other Frame Relay Network ensures that the router
will recognize that it needs to shape trafﬁc slightly differently in order to give the best performance. Choosing xDSL or Other
Frame Relay Network causes the measured uplink speed to be reported slightly lower than before on such connections, but
gives much better results.
Manual Uplink The speed at which data can be transferred from the router to your ISP. This is determined by your ISP. ISP’s often speed as
Speed: a download/upload pair. For example, 1.5Mbits/284Kbits. Using this example, you would enter 284. Alternatively you can test
your uplink speed with a service such as www.dslreports.com.
Measured Uplink This displays the detected uplink speed.
Speed:
Automatic Uplink This option is enabled by default when the QoS
Speed: Engine option is enabled. This option will allow
your router to automatically determine the uplink
speed of your Internet connection.
Dynamic This option should be enabled when you have a
Fragmentation: slow Internet uplink. It helps to reduce the impact
that large low priority network packets can have
on more urgent ones.
Enable This option is disabled by default. Enable this
StreamEngine: option for better performance and experience with
online games and other interactive applications,
such as VoIP.
The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the
QoS Engine settings are disabled and application priority is not classiﬁed automatically.
Section 3 - Conﬁguration
Network Filters
D-Link DIR-655 User Manual
DHCP Client: Select a DHCP client from the drop-down menu
and click << to copy that MAC Address.
MAC Address: Enter the MAC address you would like to ﬁlter.
To ﬁnd the MAC address on a computer, please
refer to the Networking Basics section in this
manual.
Conﬁgure MAC Select Turn MAC Filtering Off, allow MAC
Filtering: addresses listed below, or deny MAC addresses
listed below from the drop-down menu.
35
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the Broadband Router.
Section 3 - Conﬁguration
Access Control
D-Link DIR-655 User Manual
Click Next to continue with the wizard.
Access Control Wizard
Add Policy: Click the Add Policy button to start the Access
Control Wizard.
36
The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls
to only grant access to approved sites, limit web access based on time or dates, and/or block access from applications
like P2P utilities or games.
Section 3 - Conﬁguration
Access Control Wizard (continued)
D-Link DIR-655 User Manual
• Address Type - Select IP address, MAC address, or
Other Machines.
• IP Address - Enter the IP address of the computer
you want to apply the rule to.
Enter the following information and then click Next to
continue.
Select a schedule (I.E. Always) from the drop-down menu
and then click Next to continue.
Enter a name for the policy and then click Next to continue.
Section 3 - Conﬁguration
37
Access Control Wizard (continued)
D-Link DIR-655 User Manual
Click Save to save the access control rule.
To enable web logging, click Enable.
Enter the rule:
Enable - Check to enable the rule.
Name - Enter a name for your rule.
Dest IP Start - Enter the starting IP address.
Dest IP End - Enter the ending IP address.
Protocol - Select the protocol.
Dest Port Start - Enter the starting port number.
Dest Port End - Enter the ending port number.
Select the ﬁltering method and then click Next to continue.
Section 3 - Conﬁguration
38
Website Filters
D-Link DIR-655 User Manual
Website URL/ Enter the keywords or URLs that you want to
Domain: block (or allow). Any URL with the keyword in it
will be blocked.
39
Website Filters are used to deny LAN computers from accessing speciﬁc web sites by the URL or domain. A URL is a
specially formatted text string that deﬁnes a location on the Internet. If any part of the URL contains the blocked word,
the site will not be accessible and the web page will not display. To use this feature, enter the text string to be blocked
and click Save Settings. The text to be blocked will appear in the list. To delete the text, click Clear the List Below.
Section 3 - Conﬁguration
Inbound Filters
D-Link DIR-655 User Manual
Inbound Filter This section will list any rules that are created.
Rules List: You may click the Edit icon to change the
settings or enable/disable the rule, or click the
Delete icon to remove the rule.
Save: Click the Save button to apply your settings.
You must click Save Settings at the top to save
the settings.
Source IP End: E n t e r t h e e n d i n g I P a d d r e s s. E n t e r
255.255.255.255 if you do not want to specify
and IP range.
Source IP Start: Enter the starting IP address. Enter 0.0.0.0 if
you do not want to specify an IP range.
Enable: Check to enable rule.
Action: Select Allow or Deny.
Name: Enter a name for the inbound ﬁlter rule.
40
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you
can conﬁgure inbound data ﬁltering rules that control data based on an IP address range. Inbound Filters can be used
with Virtual Server, Port Forwarding, or Remote Administration features.
Section 3 - Conﬁguration
Firewall Settings
D-Link DIR-655 User Manual
IP Address: Specify the IP address of the computer on the LAN that you want to
have unrestricted Internet communication. If this computer obtains
it’s IP address automatically using DHCP, be sure to make a static
reservation on the Basic > DHCP page so that the IP address of
the DMZ machine does not change.
Note: Placing a computer in the DMZ may expose that computer to
a variety of security risks. Use of this option is only recommended
as a last resort.
Enable DMZ Host: If an application has trouble working from behind the router, you
can expose one computer to the Internet and run the application
on that computer.
Address + Port Restriction - Incoming trafﬁc must match the IP
address and port of the outgoing connection.
Address Restricted - Incoming trafﬁc must match the IP address
of the outgoing connection.
NAT Endpoint Select one of the following for TCP and UDP ports:
Filtering: Endpoint Independent - Any incoming trafﬁc sent to an open port
will be forwarded to the application that opened the port. The port
will close if idle for 5 minutes.
Enable SPI: SPI (Stateful Packet Inspection, also known as dynamic packet
ﬁltering) helps to prevent cyber attacks by tracking more state per
session. It validates that the trafﬁc passing through the session
conforms to the protocol.
41
A ﬁrewall protects your network from the outside world. The D-Link DIR-655 offers a ﬁrewall type functionality. The SPI
feature helps prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain
types of applications. If you choose to expose a computer, you cam enable DMZ. DMZ is short for Demilitarized Zone.
This option will expose the chosen computer completely to the outside world.
Section 3 - Conﬁguration
Application Level Gateway (ALG) Conﬁguration
D-Link DIR-655 User Manual
MMS: Allows Windows Media Player, using MMS protocol, to receive streaming media from the Internet.
Wake-On-LAN: Allows Ethernet network adapters with Wake-On-LAN (WOL) to function.
42
SIP: Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices
have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices.
If you are having trouble making VoIP calls, try turning this ALG off.
H.323 Allows Microsoft NetMeeting clients to communicate across NAT. Note that if you want your buddies to call you, you should
(Netmeeting): also set up a virtual server for NetMeeting. Refer to the Advanced > Virtual Server page for information on how to set up
a virtual server.
FTP: Allows FTP clients and servers to transfer data across NAT. Refer to the Advanced > Virtual Server page if you want to
host an FTP server.
MSN Messenger: Allows all of the Windows/MSN Messenger functions to work properly through the router.
RTSP: Allows applications that use Real Time Streaming Protocol to receive streaming media from the internet. QuickTime and
Real Player are some of the common applications using this protocol.
IPSEC (VPN): Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec
through NAT. This ALG may interfere with the operation of such VPN clients. If you are having trouble connecting with your
corporate network, try turning this ALG off. Please check with the system adminstrator of your corporate network whether
your VPN client supports NAT traversal.
PPTP: Allows multiple machines on the LAN to connect to their corporate network using PPTP protocol.
VPN Passthrough
RTSP
H.323
SIP (VoIP)
MMS
Here you can enable or disable ALG’s. Some protocols and applications require special handling of the IP payload to
make them work with network address translation (NAT). Each ALG provides special handling for a speciﬁc protocol
or application. A number of ALGs for common applications are enabled by default.
Section 3 - Conﬁguration
D-Link DIR-655 User Manual
43
Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may
create higher data loss.
WMM Function: WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless
clients.
802.11d: This enables 802.11d opration. 802.11d is a wireless speciﬁcation developed to allow implementation of wireless networks in
countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.
DTIM Interval: (Delivery Trafﬁc Indication Message) 3 is the
default setting. A DTIM is a countdown informing
clients of the next window for listening to
broadcast and multicast messages.
Fragmentation The fragmentation threshold, which is speciﬁed
Threshold: in bytes, determines whether packets will be
fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission.
2346 is the default setting.
RTS Threshold: This value should remain at its default setting of
2432. If inconsistent data ﬂow is a problem, only
a minor modiﬁcation should be made.
Beacon Period: Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value.
100 is the default setting and is recommended.
Transmit Power
802.11d Mode
Advanced Wireless Settings
Transmit Power: Set the transmit power of the antennas.
Section 3 - Conﬁguration
WISH Settings
D-Link DIR-655 User Manual
44
WISH supports overlaps between rules. If more than one rule matches for a speciﬁc message ﬂow, the rule with the highest
priority will be used.
WISH Rules: A WISH Rule identiﬁes a speciﬁc message ﬂow and assigns a priority to that ﬂow. For most applications, the priority
classiﬁers ensure the right priorities and speciﬁc WISH Rules are not required.
Automatic: When enabled, this option causes the router
to automatically attempt to prioritize trafﬁc
streams that it doesn’t otherwise recognize,
based on the behaviour that the streams
exhibit. This acts to deprioritize streams
that exhibit bulk transfer characteristics,
such as file transfers, while leaving
interactive trafﬁc, such as gaming or VoIP,
running at a normal priority.
Windows Media Enables the router to recognize certain
Center: audio and video streams generated by a
Windows Media Center PC and to prioritize
these above other trafﬁc. Such streams are
used by systems known as Windows Media
Extenders, such as the Xbox 360.
HTTP: Allows the router to recognize HTTP transfers
for many common audio and video streams
and prioritize them above other trafﬁc. Such
streams are frequently used by digital media
players.
Enable WISH: Enable this option if you want to allow WISH to
prioritize your trafﬁc.
WISH is short for Wireless Intelligent Stream Handling, a technology developed to enhance your experience of using
a wireless network by prioritizing the trafﬁc of different applications.
Section 3 - Conﬁguration
D-Link DIR-655 User Manual
Host Port Range: The rule applies to a ﬂow of messages for which host’s port number is within the range set here.
Host IP Range: The rule applies to a ﬂow of messages for which one computer’s IP address falls within the range set here.
Protocol: The protocol used by the messages.
BK: Background (least urgent)
BE: Best Effort.
VI: Video
VO: Voice (most urgent)
Priority: The priority of the message ﬂow is entered here.
The four priorities are deﬁned as:
Name: Create a name for the rule that is meaningful
to you.
Section 3 - Conﬁguration
45
D-Link DIR-655 User Manual
Multicast Check the box to allow multicast trafﬁc to pass
streams: through the router from the Internet.
Internet Port You may set the port speed of the Internet port
Speed: to 10Mbps, 100Mbps, or auto. Some older cable
or DSL modems may require you to set the port
speed to 10Mbps.
Internet Ping: Unchecking the box will not allow the DIR-655 to
respond to pings. Blocking the Ping may provide
some extra security from hackers. Check the box
to allow the Internet port to be “pinged”.
UPnP
Internet Ping Block
Internet Port Speed
Multicast Streams
Advanced Network Settings
UPnP Settings: To use the Universal Plug and Play (UPnP™)
feature click on Enabled. UPNP provides
compatibility with networking equipment, software
and peripherals.
Section 3 - Conﬁguration
46
Administrator Settings
D-Link DIR-655 User Manual
Inbound Filter: This section will list any rules that are created. You may click
the Edit icon to change the settings or enable/disable the
rule, or click the Delete icon to remove the rule.
Remote Admin The port number used to access the DIR-655.
Port: Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet
IP address of the DIR-655 and 8080 is the port used for the
Web Management interface.
Remote Remote management allows the DIR-655 to be conﬁgured
Management: from the Internet by a web browser. A username and
password is still required to access the Web-Management
interface. In general, only a member of your network can
browse the built-in web pages to perform Administrator tasks.
This feature enables you to perform Administrator tasks from
the remote (Internet) host.
Gateway Name: Enter a name for the DIR-655 router.
User Password: Enter the new password for the User login. If you login as
the User, you can only see the settings, but cannot change
them.
Admin Password: Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
Change Password
Remote Management
47
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.
There are two accounts that can access the management interface through the web browser. The accounts are admin
and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot
make any changes. Only the admin account has the ability to change both admin and user account passwords.
Section 3 - Conﬁguration
Time Settings
D-Link DIR-655 User Manual
Manual: To manually input the time, enter the values
in these ﬁelds for the Year, Month, Day, Hour,
Minute, and Second and then click Set Time.
You can also click Copy Your Computer’s Time
Settings.
NTP Server Used: Enter the NTP server or select one from the
drop-down menu.
Enable NTP NTP is short for Network Time Protocol. NTP
Server: synchronizes computer clock times in a network
of computers. Check this box to use a NTP
server. This will only connect to a server on the
Internet, not a local server.
Daylight Saving: To select Daylight Saving time manually, select
enabled or disabled, and enter a start date and
an end date for daylight saving time.
Time Zone: Select the Time Zone from the drop-down
menu.
48
The Time Conﬁguration option allows you to conﬁgure, update, and maintain the correct time on the internal system
clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also
be conﬁgured to automatically adjust the time when needed.
Section 3 - Conﬁguration
SysLog
D-Link DIR-655 User Manual
SysLog Server IP The address of the SysLog server that will be
Address: used to send the logs. You may also select
your computer from the drop-down menu (only
if receiving an IP address from the router via
DHCP).
Enable Logging to Check this box to send the router logs to a
SysLog Server: SysLog Server.
49
The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs
to a SysLog server on your network.
Section 3 - Conﬁguration
Email Settings
D-Link DIR-655 User Manual
50
Schedule: This option is enabled when On Schedule is selected. You can select a schedule from the list of deﬁned schedules. To create
a schedule, go to Tools > Schedules.
On Schedule: Selecting this option will send the logs via email
according to schedule.
On Log Full: When this option is selected, logs will be sent
via email when the log is full.
Password: Enter the password associated with the account.
Re-type the password associated with the
account.
Account Name: Enter your account for sending email.
Enable Check this box if your SMTP server requires
Authentication: authentication.
SMTP Server Enter the SMTP server address for sending email.
Address: If your SMTP server requires authentication,
select this option.
To Email Address: Enter the email address where you want the
email sent.
From Email This email address will appear as the sender
Address: when you receive a log ﬁle or ﬁrmware upgrade
notiﬁcation via email.
Enable Email When this option is enabled, router activity logs
Notiﬁcation: are e-mailed to a designated email address.
The Email feature can be used to send the system log ﬁles, router alert messages, and ﬁrmware update notiﬁcation
to your email address.
Section 3 - Conﬁguration
System Settings
D-Link DIR-655 User Manual
Reboot Device: Click to reboot the router.
Restore to Factory This option will restore all conﬁguration settings
Default Settings: back to the settings that were in effect at the
time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router conﬁguration
settings, use the Save button above.
Load Settings Use this option to load previously saved
from Local Hard router configuration settings. First, use the
Drive: Browse control to ﬁnd a previously save ﬁle
of conﬁguration settings. Then, click the Load
button to transfer those settings to the router.
Save Settings to Use this option to save the current router
Local Hard Drive: conﬁguration settings to a ﬁle on the hard disk
of the computer you are using. First, click the
Save button. You will then see a ﬁle dialog,
where you can select a location and ﬁle name
for the settings.
Section 3 - Conﬁguration
51
Update Firmware
D-Link DIR-655 User Manual
Check Email Notiﬁcation of Newer Firmware
Version to have the router send an email when
there is a new ﬁrmware available.
Notiﬁcations Check Automatically Check Online for Latest
Options: Firmware Version to have the router check
automatically to see if there is a new ﬁrmware
upgrade.
Browse: After you have downloaded the new ﬁrmware,
click Browse to locate the ﬁrmware update on
your hard drive. Click Upload to complete the
ﬁrmware upgrade.
Firmware Click on Check Online Now for Latest Firmware
Upgrade: Version to ﬁnd out if there is an updated ﬁrmware;
if so, download the new ﬁrmware to your hard
drive.
52
You can upgrade the ﬁrmware of the Router here. Make sure the ﬁrmware you want to use is on the local hard drive of
the computer. Click on Browse to locate the ﬁrmware ﬁle to be used for the update. Please check the D-Link support
site for ﬁrmware updates at http://support.dlink.com. You can download ﬁrmware upgrades to your hard drive from the
D-Link support site.
Section 3 - Conﬁguration
DDNS
D-Link DIR-655 User Manual
Timeout: Enter a time (in hours).
Password or Key: Enter the Password for your DDNS account.
Username or Key: Enter the Username for your DDNS account.
Host Name: Enter the Host Name that you registered with
your DDNS service provider.
Server Address: Choose your DDNS provider from the drop
down menu.
DDNS: Dynamic Domain Name System is a method of
keeping a domain name linked to a changing IP
Address. Check the box to enable DDNS.
53
The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have
purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet
Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in
your domain name to connect to your server no matter what your IP address is.
Section 3 - Conﬁguration
System Check
D-Link DIR-655 User Manual
Ping Results: The results of your ping attempts will be displayed here.
Ping Test: The Ping Test is used to send Ping packets to test if a
computer is on the Internet. Enter the IP Address that you
wish to Ping, and click Ping.
Section 3 - Conﬁguration
54
Schedules
D-Link DIR-655 User Manual
Schedule Rules The list of schedules will be listed here. Click the
List: Edit icon to make changes or click the Delete
icon to remove the schedule.
Save: Click Save to save your schedule. You must click
Save Settings at the top for your schedules to go
into effect.
Time: Check All Day - 24hrs or enter a start and end
time for your schedule.
Days: Select a day, a range of days, or All Week to
include every day.
Name: Enter a name for your new schedule.
Section 3 - Conﬁguration
55
Device Information
D-Link DIR-655 User Manual
IGMP Multicast Displays the Multicast Group IP Address.
Memberships:
LAN Computers: Displays computers and devices that are connected to the router via
Ethernet and that are receiving an IP address assigned by the router
(DHCP).
Wireless LAN: Displays the wireless MAC address and your wireless settings such as
SSID and Channel.
LAN: Displays the MAC address and the private (local) IP settings for the
router.
WAN: Displays the MAC address and the public IP settings for the router.
General: Displays the router’s time and ﬁrmware version.
56
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use
Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection.
If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be
displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP.
This page displays the current information for the DIR-655. It will display the LAN, WAN (Internet), and Wireless
information.
Section 3 - Conﬁguration
Log
D-Link DIR-655 User Manual
Save Log: This option will save the router to a log ﬁle on your
computer.
Email Now: This option will send a copy of the router log to
the email address conﬁgured in the Tools > Email
screen.
Clear: Clears all of the log contents.
Refresh: Updates the log details on the screen so it displays
any recent activity.
Apply Log Will ﬁlter the log results so that only the selected
Settings: options appear.
View Levels: There are three levels of message importance:
Informational, Warning, and Critical. Select the levels
that you want displayed in the log.
What to View: You can select the types of messages that you want
to display from the log. Firewall & Security, System,
and Router Status messages can be selected.
57
The router automatically logs (records) events of possible interest in it’s internal memory. If there isn’t enough internal
memory for all events, logs of older events are deleted but logs of the latest events are retained. The Logs option allows
you to view the router logs. You can deﬁne what types of events you want to view and the level of the events to view.
This router also has external Syslog Server support so you can send the log ﬁles to a computer on your network that
is running a Syslog utility.
Section 3 - Conﬁguration
Stats
D-Link DIR-655 User Manual
Active Sessions
58
The screen below displays the Trafﬁc Statistics. Here you can view the amount of packets that pass through the DIR-655 on
both the Internet and the LAN ports. The trafﬁc counter will reset if the device is rebooted.
Section 3 - Conﬁguration
Wireless
D-Link DIR-655 User Manual
The WISH details page displays full details of wireless clients that are connected when WISH is enabled.
WISH
59
The wireless client table displays a list of current connected wireless clients. This table also displays the connection
time and MAC address of the connected wireless clients.
Section 3 - Conﬁguration
D-Link DIR-655 User Manual
Section 3 - Conﬁguration
Support
60
Wireless Security
What is WEP?
• WPA2-PSK (Pre-Shared Key)
• WPA-PSK (Pre-Shared Key)
D-Link DIR-655 User Manual
61
To gain access to a WEP network, you must know the key. The key is a string of characters that you create. When using
WEP, you must determine the level of encryption. The type of encryption determines the key length. 128-bit encryption
requires a longer key than 64-bit encryption. Keys are deﬁned by entering in a string in HEX (hexadecimal - using
characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange – alphanumeric characters) format.
ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted to HEX
for use over the network. Four keys can be deﬁned so that you can change keys easily.
WEP stands for Wired Equivalent Privacy. It is based on the IEEE 802.11 standard and uses the RC4 encryption
algorithm. WEP provides security by encrypting data over your wireless network so that it is protected as it is transmitted
from one wireless device to another.
• WPA2 (Wi-Fi Protected Access 2)
• WPA (Wi-Fi Protected Access)
• WEP (Wired Equivalent Privacy)
This section will show you the different levels of security you can use to protect your data from intruders. The
DIR-655 offers the following types of security:
Section 4 - Security
What is WPA?
D-Link DIR-655 User Manual
62
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a
more secure public key encryption system to ensure that only authorized network users can access the network.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric
password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must
be the exact same key entered on your wireless router or access point.
• User authentication, which is generally missing in WEP, through the extensible authentication protocol
(EAP). WEP regulates access to a wireless network based on a computer’s hardware-speciﬁc MAC
address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key
encryption system to ensure that only authorized network users can access the network.
• Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys
using a hashing algorithm and, by adding an integrity-checking feature, ensures that the keys haven’t
been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead
of TKIP.
The 2 major improvements over WEP:
WPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired
Equivalent Privacy).
Section 4 - Security
Wireless Security Setup Wizard
D-Link DIR-655 User Manual
Click Next to continue.
To run the security wizard, click on Setup at the top and then
click Launch Wireless Security Setup Wizard.
Section 4 - Security
63
D-Link DIR-655 User Manual
Click Next to continue.
If you selected Good, enter 13 characters or 26 Hex digits.
If you selected Best or Better, enter a password between
8-63 characters.
Click Next to continue.
• Best - WPA2 Authentication
• Better - WPA Authentication
• Good - WEP Encryption
• None - No security
Select the level of security for your wireless network:
Enter the SSID (Service Set Identiﬁer). The SSID is the
name of your wireless network. Create a name using up to
32 characters. The SSID is case-sensitive.
Section 4 - Security
64
D-Link DIR-655 User Manual
65
If you selected WPA-Enterprise, the RADIUS information will be displayed. Click Save to ﬁnish the Security Wizard.
Click Save to ﬁnish the Security Wizard.
If you selected Best, the following screen will show you your
Pre-Shared Key to enter on your wireless clients.
Click Save to ﬁnish the Security Wizard.
If you selected Better, the following screen will show you your
Pre-Shared Key to enter on your wireless clients.
Click Save to ﬁnish the Security Wizard.
If you selected Good, the following screen will show you your
WEP key to enter on your wireless clients.
Section 4 - Security
Conﬁgure WEP
D-Link DIR-655 User Manual
6. Click Save Settings to save your settings. If you are
conﬁguring the router with a wireless adapter, you will lose
connectivity until you enable WEP on your adapter and
enter the same WEP key as you did on the router.
5. Next to Authentication, select Shared Key.
4. Next to WEP Key 1, enter a WEP key that you create.
Make sure you enter this key exactly on all your wireless
devices. You may enter up to 4 different keys.
3. Next to WEP Key Length, select the level of ecryption (64
or 128-bit).
Hex - (recommended) Letters A-F and numbers 0-9
are valid.
2. Next to Security Mode, select WEP.
1. Log into the web-based configuration by opening a
web browser and entering the IP address of the router
(192.168.0.1). Click on Setup and then click Wireless
Settings on the left side.
66
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
Section 4 - Security
Conﬁgure WPA-Personal (PSK)
D-Link DIR-655 User Manual
67
6. Click Save Settings to save your settings. If you are conﬁguring the router with a wireless adapter, you will lose
connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router.
5. Next to Pre-Shared Key, enter a key (passphrase). The key
is entered as a pass-phrase in ASCII format at both ends of
the wireless connection. The pass-phrase must be between 8-63 characters.
4. Next to Group Key Update Interval, enter the amount of time
before the group key used for broadcast and multicast data
is changed (3600 is default).
3. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only.
Use Auto if you have wireless clients using both WPA and
WPA2.
2. Next to Security Mode, select WPA-Personal.
1. Log into the web-based configuration by opening a
web browser and entering the IP address of the router
(192.168.0.1). Click on Setup and then click Wireless
Settings on the left side.
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
Section 4 - Security
Conﬁgure WPA-Enterprise (RADIUS)
D-Link DIR-655 User Manual
8. Next to RADIUS Server Shared Secret, enter the security key.
7. Next to RADIUS Server Port, enter the port you are using with
your RADIUS server. 1812 is the default port.
6. Next to RADIUS Server IP Address enter the IP Address of your
RADIUS server.
5. Next to Authentication Timeout, enter the amount of time before
a client is required to re-authenticate (60 minutes is default).
4. Next to Group Key Update Interval, enter the amount of time
before the group key used for broadcast and multicast data is
changed (3600 is default).
3. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use
Auto if you have wireless clients using both WPA and WPA2.
2. Next to Security Mode, select WPA-Enterprise.
1. Log into the web-based conﬁguration by opening a web browser
and entering the IP address of the router (192.168.0.1). Click
on Setup and then click Wireless Settings on the left side.
68
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
Section 4 - Security
D-Link DIR-655 User Manual
11. Click Apply Settings to save your settings.
10. Click Advanced to enter settings for a secondary RADIUS
Server.
9. If the MAC Address Authentication box is selected then the
user will need to connect from the same computer whenever
logging into the wireless network.
Section 4 - Security
69
D-Link DIR-655 User Manual
If you get a good signal but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) and click
the Connect button.
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select View Available
Wireless Networks.
or
If you receive the Wireless Networks Detected bubble, click
on the center of the bubble to access the utility.
70
Windows® XP users may use the built-in wireless utility (Zero Conﬁguration Utility). The following instructions are for
Service Pack 2 users. If you are using another company’s utility or Windows® 2000, please refer to the user manual
of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option
similar to the Windows® XP utility as seen below.
Using Windows® XP
Connect to a Wireless Network
Section 5 - Connecting to a Wireless Network
Conﬁgure WEP
D-Link DIR-655 User Manual
2. Highlight the wireless network (SSID) you would like to
connect to and click Connect.
1. Open the Windows® XP Wireless Utility by right-clicking
on the wireless computer icon in your system tray
(lower-right corner of screen). Select View Available
Wireless Networks.
71
It is recommended to enable WEP on your wireless router or access point before conﬁguring your wireless adapter. If
you are joining an existing network, you will need to know the WEP key being used.
Section 5 - Connecting to a Wireless Network
D-Link DIR-655 User Manual
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the WEP settings are correct. The
WEP key must be exactly the same as on the wireless router.
3. The Wireless Network Connection box will appear. Enter the same
WEP key that is on your router and click Connect.
Section 5 - Connecting to a Wireless Network
72
Conﬁgure WPA-PSK
D-Link DIR-655 User Manual
2. Highlight the wireless network (SSID) you would like to
connect to and click Connect.
1. Open the Windows® XP Wireless Utility by right-clicking
on the wireless computer icon in your system tray
(lower-right corner of screen). Select View Available
Wireless Networks.
73
It is recommended to enable WEP on your wireless router or access point before conﬁguring your wireless adapter. If
you are joining an existing network, you will need to know the WEP key being used.
Section 5 - Connecting to a Wireless Network
D-Link DIR-655 User Manual
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the WPA-PSK settings are correct.
The WPA-PSK passphrase must be exactly the same as on the
wireless router.
3. The Wireless Network Connection box will appear. Enter the
WPA-PSK passphrase and click Connect.
Section 5 - Connecting to a Wireless Network
74
Troubleshooting
D-Link DIR-655 User Manual
75
• Disable any internet security software running on the computer. Software ﬁrewalls such as Zone Alarm, Black Ice,
Sygate, Norton Personal Firewall, and Windows® XP ﬁrewall may block access to the conﬁguration pages. Check the
help ﬁles included with your ﬁrewall software for more information on disabling or conﬁguring it.
• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using
a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may
not be on.
• Internet Explorer 6.0 or higher
• Netscape 8 or higher
• Mozilla 1.7.12 (5.0) or higher
• Opera 8.5 or higher
• Safari 1.2 or higher (with Java 1.3.1 or higher)
• Camino 0.8.4 or higher
• Firefox 1.5 or higher
• Make sure you have an updated Java-enabled web browser. We recommend the following:
When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website on
the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself.
Your computer must be on the same IP subnet to connect to the web-based utility.
1. Why can’t I access the web-based conﬁguration utility?
This chapter provides solutions to problems that can occur during the installation and operation of the DIR-655. Read
the following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If you have
a different operating system, the screenshots on your computer will look similar to the following examples.)
Section 6 - Troubleshooting
D-Link DIR-655 User Manual
76
To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a
paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process.
Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is
admin and leave the password box empty.
If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back
to the factory defaults.
2. What can I do if I forgot my password?
• If you still cannot access the conﬁguration, unplug the power to the router for 10 seconds and plug back in. Wait
about 30 seconds and try accessing the conﬁguration. If you have multiple computers, try connecting using a different
computer.
• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address
bar. This should open the login page for your the web management.
• Close your web browser (if open) and open it.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three
times.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings
button. Make sure nothing is checked. Click OK.
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab,
click the button to restore the settings to their defaults.
• Conﬁgure your Internet settings:
Section 6 - Troubleshooting
D-Link DIR-655 User Manual
Example: ping yahoo.com -f -l 1472
ping [url] [-f] [-l] [MTU value]
• Once the window opens, you’ll need to do a special ping. Use the following syntax:
• Windows® 95, 98, and Me users type in command (Windows® NT, 2000, and XP users type in cmd) and
press Enter (or click OK).
• Click on Start and then click Run.
77
To ﬁnd the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could
be another computer, or a URL.
Note: AOL DSL+ users must use MTU of 1400.
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and
Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc).
3. Why can’t I connect to certain sites or send and receive emails when connecting through my router?
Section 6 - Troubleshooting
D-Link DIR-655 User Manual
• Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in
increments of ten.
• To change the MTU enter the number in the MTU ﬁeld and click Save Settings to save your settings.
• Click on Setup and then click Manual Conﬁgure.
• Enter your username (admin) and password (blank by default). Click OK to enter the web conﬁguration
page for the device.
• Open your browser, enter the IP address of your router (192.168.0.1) and click OK.
To change the MTU rate on your router follow the steps below:
Once you ﬁnd your MTU, you can now conﬁgure your router with the proper MTU size.
78
You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a
fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example,
lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network
we’re working with (1452+28=1480).
Section 6 - Troubleshooting
Wireless Basics
D-Link DIR-655 User Manual
79
Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in
order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device
used to provide this link.
Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop
and desktop systems support the same protocols as Ethernet adapter cards.
A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals
instead of wires. Wireless LANs are used increasingly in both home and ofﬁce environments, and public areas such
as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and
communicate more efﬁciently. Increased mobility and the absence of cabling and other ﬁxed infrastructure have proven
to be beneﬁcial for many users.
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless
connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard,
the D-Link wireless family of products will allow you to securely access the data you want, when and where you want
it. You will be able to enjoy the freedom that wireless networking delivers.
Appendix A - Wireless Basics
D-Link DIR-655 User Manual
80
In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access
point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an
indoor access point as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal
can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school
campuses, airports, golf courses, and many other outdoor venues.
Wireless Local Area Network (WLAN)
Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point
B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless
network range area to be able to connect your computer. There are two different types of wireless networks Wireless
Local Area Network (WLAN), and Wireless Personal Area Network (WPAN).
How does wireless work?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products.
D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your
network.
Why D-Link Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi
uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or
ofﬁce network.
What is Wireless?
Appendix A - Wireless Basics
D-Link DIR-655 User Manual
Small Ofﬁce and Home Ofﬁce
• Stay on top of everything at home as you would at ofﬁce
• Remotely access your ofﬁce network from home
• Share Internet connection and printer with multiple computers
• No need to dedicate ofﬁce space
Home
• Gives everyone at home broadband access
• Surf the web, check email, instant message, and etc
• Gets rid of the cables around the house
• Simple and easy to use
81
Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, ofﬁce,
business, D-Link has a wireless solution for it.
Who uses wireless?
Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use
nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops,
speakers, and other devices that operate on batteries.
Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range
up to 30 feet away.
Wireless Personal Area Network (WPAN)
Appendix A - Wireless Basics
D-Link DIR-655 User Manual
82
Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the
router/access point. This would signiﬁcantly reduce any interference that the appliances might cause since they operate
on same frequency.
Eliminate Interference
Make sure you place the router/access point in a centralized location within your network for the best performance. Try
to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home.
If you have a two-story home, you may need a repeater to boost the signal to extend the range.
Centralize your router or Access Point
Here are a few things to keep in mind, when you install a wireless network.
Tips
Wireless network is easy to setup, but if you’re installing it for the ﬁrst time it could be quite a task not knowing where to
start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless
network.
Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote
locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.
Wireless technology is expanding everywhere not just at home or ofﬁce. People like the freedom of mobility and it’s
becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless
connection in public places is usually called “hotspots”.
Where is wireless used?
Appendix A - Wireless Basics
D-Link DIR-655 User Manual
83
An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in
Ad-Hoc mode to communicate.
An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect
to the wireless router or access point.
• Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network
adapters on each computer, such as two or more DIR-655 wireless network Cardbus adapters.
• Infrastructure – All wireless clients will connect to an access point or wireless router.
There are basically two modes of networking:
Wireless Modes
Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning
on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up.
Security
Appendix A - Wireless Basics
Networking Basics
D-Link DIR-655 User Manual
84
If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee
or administrator to verify their wireless network settings.
If the address is 0.0.0.0, check your adapter
installation, security settings, and the settings
on your router. Some ﬁrewall software programs
may block a DHCP request on newly installed
adapters.
This will display the IP address, subnet mask, and
the default gateway of your adapter.
At the prompt, type ipconﬁg and press Enter.
Click on Start > Run. In the run box type cmd and click OK.
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a
DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Check your IP address
Appendix B - Networking Basics
D-Link DIR-655 User Manual
Step 5
Click OK twice to save your settings.
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address
192.168.0.X where X is a number between 2 and 99. Make sure that the number
you choose is not in use on the network. Set Default Gateway the same as the LAN
IP address of your router (192.168.0.1).
85
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN
IP address on your router.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 2
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.
Step 1
Windows® XP - Click on Start > Control Panel > Network Connections.
Windows® 2000 - From the desktop, right-click My Network Places > Properties.
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps
below:
Statically Assign an IP address
Appendix B - Networking Basics
• 117Mbps (243)
• 78Mbps (162)
• 58.5Mbps (121.5)
• 39Mbps (81)
• 19.5Mbps (40.5)
• 6.5Mbps (13.5)
• Power
• WLAN
• Internet
• LAN (10/100)
Warranty
1 Year
Dimensions
• L = 7.6 inches
• W = 4.6 inches
• H = 1.2inches
Safety & Emissions
• FCC
• CE
Humidity
95% maximum (non-condensing)
Operating Temperature
32°F to 131°F ( 0°C to 55°C)
LEDs
• Status
• USB
External Antenna Type
Three (3) detachable reverse SMA Antennas
Transmitter Output Power
19dBm
Frequency Range
2.4GHz to 2.483GHz
Technical Speciﬁcations
D-Link DIR-655 User Manual
86
* Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n speciﬁcations. Actual data throughput will vary. Network conditions and
environmental factors, including volume of network trafﬁc, building materials and construction, and network overhead, lower actual data throughput rate. Environmental
factors will adversely affect wireless signal range.
MSC (0-15)
• 130Mbps (270)
• 104Mbps (216)
• 66Mbps (135)
• 52Mbps (108)
• 26Mbps (54)
• 12Mbps (27)
Wireless Signal Rates*
• 108Mbps • 48Mbps
• 54Mbps
• 24Mbps
• 36Mbps
• 12Mbps
• 18Mbps
• 9Mbps
• 11Mbps
• 5.5Mbps
• 6Mbps
• 1Mbps
• 2Mbps
Security
• WPA-Personal
• WPA2-Personal
• WPA-Enterprise
• WPA2-Enterprise
• 64/128-bit WEP
Standards
• IEEE 802.11n (draft)
• IEEE 802.11g
• IEEE 802.11b
• IEEE 802.3
• IEEE 802.3u
Appendix C - Technical Speciﬁcations
Phone Support:
(800) 361-5265
Monday to Friday 7:30am to 9:00pm EST
Internet Support:
http://support.dlink.ca
Phone Support:
(877) 453-5465
24 hours a day, seven days a week.
Internet Support:
http://support.dlink.com
D-Link DIR-655 User Manual
For customers within Canada:
For customers within the United States:
87
You can ﬁnd software updates and user documentation on the D-Link website as well as frequently asked questions
and answers to technical issues.
• Model number of the product (e.g. DIR-655)
• Hardware Revision (located on the label on the bottom of the router (e.g. rev A1))
• Serial Number (s/n number located on the label on the bottom of the router).
Before you contact technical support, please have the following ready:
U.S. and Canadian customers can contact D-Link technical support through our web site or by phone.
Contacting Technical Support
Appendix D - Contacting Technical Support
Warranty
D-Link DIR-655 User Manual
88
The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at
D-Link’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the
actual purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Ofﬁce. The replacement
hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part
thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects
to the defective Hardware. Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety
(90) days, whichever is longer, and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if
D-Link determines that it is not practical to repair or replace the defective Hardware, the actual price paid by the original purchaser for the
defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced
by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund.
• Hardware (excluding power supplies and fans): One (1) year
• Power supplies and fans: One (1) year
• Spare parts and spare kits: Ninety (90) days
D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects in
workmanship and materials under normal use from the date of original retail purchase of the product, for the period set forth below
(“Warranty Period”), except as otherwise stated herein.
Limited Warranty:
• Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and
• Only for products purchased and delivered within the ﬁfty states of the United States, the District of Columbia, U.S. Possessions
or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty:
Appendix E - Warranty
D-Link DIR-655 User Manual
• The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist
the customer in resolving any suspected defects with the product. If the product is considered defective, the customer must
obtain a Return Material Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID
Number at https://rma.dlink.com/.
• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software
nonconformance in sufﬁcient detail to allow DLink to conﬁrm the same, along with proof of purchase of the product (such
as a copy of the dated purchase invoice for the product) if the product is not registered.
89
Submitting A Claim:
The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired
and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:
The Limited Warranty provided hereunder for Hardware and Software portions of D-Link’s products will not be applied to and does not cover
any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the
sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold
“As-Is” without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything
stated herein to the contrary.
Non-Applicability of Warranty:
D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional speciﬁcations
for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety
(90) days (“Software Warranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated
in its documentation. D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the
Software will be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under
this Limited Warranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially
conforms to D-Link’s functional speciﬁcations for the Software or to refund the portion of the actual purchase price paid that is attributable
to the Software. Except as otherwise agreed by DLink in writing, the replacement Software is provided only to the original licensee, and
is subject to the terms and conditions of the license granted by D-Link for the Software. Replacement Software will be warranted for the
remainder of the original Warranty Period and is subject to the same limitations and exclusions. If a material non-conformance is incapable
of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by
the original licensee for the non-conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies
thereof) is ﬁrst returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates.
Limited Software Warranty:
Appendix E - Warranty
D-Link DIR-655 User Manual
90
EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY
OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT.
Disclaimer of Other Warranties:
While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized
D-Link Service Ofﬁce. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.
The Limited Warranty provided herein by D-Link does not cover:
Products that, in D-Link’s judgment, have been subjected to abuse, accident, alteration, modiﬁcation, tampering, negligence, misuse, faulty
installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the
model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for
repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage
that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, ﬁrmware or other
products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation
sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product.
What Is Not Covered:
• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products
sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer
and shipped to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible
for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via
UPS Ground or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an
address in the United States, otherwise we will ship the product to you freight collect. Expedited shipping is available upon
request and provided shipping charges are prepaid by the customer. D-Link may reject or return any product that is not
packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from
the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges
for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by
D-Link not to be defective or non-conforming.
• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping
package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside
of the package. Do not include any manuals or accessories in the shipping package. DLink will only replace the defective
portion of the product and will not ship back any accessories.
Appendix E - Warranty
D-Link DIR-655 User Manual
Copyright ©2006 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.
91
No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make
any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as
stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.
Copyright Statement:
D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. Other trademarks or registered trademarks are the property
of their respective owners.
Trademarks:
This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental
or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply.
This Limited Warranty provides speciﬁc legal rights and you may also have other rights which vary from state to state.
Governing Law:
TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY
OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY
CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR
LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF
OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION
OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE)
RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF
THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY
FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR
NONCONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE
PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES
ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY.
Limitation of Liability:
IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF
SUCH IMPLIED WARRANTY SHALL BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY,
SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.
Appendix E - Warranty
These
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
factory to match the intended destination. The firmware setting is not accessible by the end user.
The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
operated with minimum distance 20cm between the radiator & your body.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
FCC Radiation Exposure Statement:
IMPORTANT NOTE:
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
operate this equipment.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
Reorient or relocate the receiving antenna.
to correct the interference by one of the following measures:
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Federal Communication Commission Interference Statement
services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and
EN 301 489-17 V1.2.1 (2002-08)
services; Part 1: Common technical requirements
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and
EN 301 489-1 V1.6.1 (2005-09)
the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the
R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in
EN 300 328 V1.7.1 (2006-10)
public
the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110MHz - 40 GHz) - General
Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with
EN 50385: 2002
Safety of Information Technology Equipment
EN 60 950-1: 2006
to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order
Europe – EU Declaration of Conformity
Ar šo [name of manufacturer / izgatavotƗja nosaukums] deklarƝ, ka [type of equipment / iekƗrtas tips] atbilst
Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Italiano [Italian]
Latviski [Latvian]
Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
ȂǼ ȉǾȃ ȆǹȇȅȊȈǹ [name of manufacturer] ǻǾȁȍȃǼǿ ȅȉǿ [type of equipment] ȈȊȂȂȅȇĭȍȃǼȉǹǿ
ȆȇȅȈ ȉǿȈ ȅȊȈǿȍǻǼǿȈ ǹȆǹǿȉǾȈǼǿȈ Ȁǹǿ ȉǿȈ ȁȅǿȆǼȈ ȈȋǼȉǿȀǼȈ ǻǿǹȉǹȄǼǿȈ ȉǾȈ ȅǻǾīǿǹȈ
1999/5/ǼȀ.
Français [French]
ǼȜȜȘȞȚțȒ [Greek]
Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
English
Español
[Spanish]
Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of equipment]
vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
Eesti [Estonian]
Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den
grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG
befindet.
Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse] overholder de
væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Dansk [Danish]
Deutsch
[German]
[Jméno výrobce] tímto prohlašuje, že tento [typ zaĜízení] je ve shodČ se základními požadavky a dalšími
pĜíslušnými ustanoveními smČrnice 1999/5/ES.
ýesky [Czech]
0560
in the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.
This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP
outdoor radio links and/or for supplying public access to telecommunications and/or network services.
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up
France and Italy where restrictive use applies.
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in
Svenska
[Swedish]
Suomi [Finnish]
Slovensky
[Slovak]
Slovensko
[Slovenian]
Português
[Portuguese]
Polski [Polish]
Magyar
[Hungarian]
Malti [Maltese]
Nederlands
[Dutch]
Lietuviǐ
[Lithuanian]
DirektƯvas 1999/5/EK bǌtiskajƗm prasƯbƗm un citiem ar to saistƯtajiem noteikumiem.
Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga egenskapskrav
och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
[Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä] tyyppinen laite
on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
[Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĎĖa základné požiadavky a všetky príslušné ustanovenia
Smernice 1999/5/ES.
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi
doloþili direktive 1999/5/ES.
[Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e
outras disposições da Directiva 1999/5/CE.
Niniejszym [nazwa producenta] oĞwiadcza, Īe [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz
pozostaáymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és az
1999/5/EC irányelv egyéb elõírásainak.
Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ƫtiƥijiet essenzjali u
ma provvedimenti oƫrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de
essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas
1999/5/EB Direktyvos nuostatas.
Registration
D-Link DIR-655 User Manual
Version 1.1
October 19, 2006
94
Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty
rights.
Appendix F - Registration

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2008:07:03 13:58:18+08:00
Modify Date                     : 2008:07:03 14:02:54+08:00
Metadata Date                   : 2008:07:03 14:02:54+08:00
Creator Tool                    : PScript5.dll Version 5.2
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 6824 bytes, use -b option to extract)
Document ID                     : uuid:C1E0EEFAC448DD11B7E5AF943BD63C8B
Instance ID                     : uuid:4f8b8dbb-4c52-470b-b99b-5813dc6c8de1
Derived From Document Name      : uuid:61a75b67-7f68-4261-88b3-edbe79ef0c82
Derived From Instance ID        : uuid:8fa433a3-cb12-418b-8258-abcfd5c96761
Derived From Document ID        : adobe:docid:indd:c926e459-5f97-11db-9fbe-c02a510c4bf6
Derived From Rendition Class    : proof:pdf
Format                          : application/pdf
Title                           : User's manual rev.2.pdf
Creator                         : WendyLiao
Page Count                      : 96
Author                          : WendyLiao

EXIF Metadata provided by EXIF.tools

D Link DIR655A4 Xtreme N GIGABIT ROUTER User Manual User s manual rev 2

D Link Corporation Xtreme N GIGABIT ROUTER User s manual rev 2

Manual

FCC ID Filing: KA2DIR655A4

Navigation menu

Namespaces

Views

Navigation