D Link DWL2700APB1 IEEE802.11g Outdoor Access Point User Manual Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	693304
Application ID	s4vk2F7yHGsFDwWEixc7hA==
Document Description	Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	229.33kB (2866623 bits)
Date Submitted	2006-08-14 00:00:00
Date Available	2006-08-14 00:00:00
Creation Date	2006-08-14 09:06:08
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2006-08-14 09:09:32
Document Title	Manual 1
Document Creator	Adobe InDesign CS2 (4.0.2)

DWL-2700AP User’s Manual
Table of Contents
Table of Contents
Package Contents............................................................................................. 5
Minimum System Requirements............................................................... 5
Introduction........................................................................................................ 6
Features and Benefits....................................................................................... 8
Wireless Basics................................................................................................. 9
Standards-based Technology................................................................. 10
Installation Considerations...................................................................... 11
Getting Started................................................................................................ 13
Connecting To a PoE (Power over Ethernet) Network............................ 14
Using the Configuration Menu....................................................................... 15
Configuration > Save and Activate.......................................................... 16
Home > Basic Settings > Wireless > Access Point................................. 17
Home > Basic Settings > Wireless > Access Point (WEP)..................... 19
Home > Basic Settings > Wireless > Access Point (802.1x)................... 20
Home > Basic Settings > Wireless > Access Point (WPA-Enterprise).... 21
Home > Basic Settings > Wireless > Access Point (WPA-Personal)...... 22
Home > Basic Settings > Wireless > WDS with AP................................ 23
Home > Basic Settings > Wireless > WDS with AP (WEP).................... 25
Home > Basic Settings > Wireless > WDS with AP (WPA-Personal)...... 26
Home > Basic Settings > Wireless > WDS............................................. 27
Home > Basic Settings > Wireless > WDS (WEP).................................. 29
Home > Basic Settings > Wireless > WDS (WPA-Personal)................... 30
Home > Basic Settings > Wireless Modes.............................................. 31
Home > Basic Settings > LAN > Static................................................... 32
Home > Basic Settings > LAN > Dynamic.............................................. 33
Home > Advanced Settings > Performance............................................ 34
Home > Advanced Settings> AP Grouping Settings.............................. 36
Home > Advanced Settings > Multi-SSID Settings................................. 37
Home > Filters > Ethernet MAC ACL...................................................... 39
Home > Filters > Wireless MAC ACL...................................................... 40
Home > Filters > Wireless IP ACL.......................................................... 41
Home > Filters > WLAN Partition Settings.............................................. 42
Home > Status > Device Information...................................................... 43
Home > Status > Indication.................................................................... 44
Home > Status > Client Information........................................................ 45
Home > Status > WDS Information........................................................ 46
Home > Status > WLAN 802.11G Traffic Statistics................................. 47
Home > Log > View Log......................................................................... 48
Home > Log > System Log Settings....................................................... 49
D-Link Systems, Inc.
DWL-2700AP User’s Manual
Tool > Administrator Settings.................................................................. 50
Tool > Firmware and SSL Certification Upload....................................... 52
Tool > Configuration File Upload and Download..................................... 53
Tool > Cfg File > Choose file ................................................................. 54
Tool > SNTP........................................................................................... 55
System > System Settings...................................................................... 56
Using the AP Manager.................................................................................... 57
Discovering Devices............................................................................... 57
Selecting Devices................................................................................... 58
IP Configuration...................................................................................... 58
Device Configuration.............................................................................. 59
Device Configuration > General.............................................................. 60
Device Configuration > Wireless . .......................................................... 62
Device Configuration > Wireless > Authentication Modes...................... 64
Device Configuration > Security............................................................. 65
Device Configuration > Security > WEP................................................. 67
Device Configuration > Security > 802.1x.............................................. 68
Device Configuration > Security > 802.1x (RADIUS)............................. 69
Device Configuration > Security > WPA-Enterprise (Cipher).................. 70
Device Configuration > Security > WPA-Enterprise (Server).................. 71
Device Configuration > Security > WPA-Personal (Cipher).................... 72
Device Configuration > Filters > WLAN Partition > Access Control........ 73
Device Configuration > Filters > Ethernet/Wireless IP Filters................. 74
Device Configuration > AP Mode............................................................ 75
Device Configuration > AP Mode > WDS with AP.................................. 76
Device Configuration > AP Mode > WDS............................................... 77
Device Configuration > Indication........................................................... 78
Device Configuration > Log.................................................................... 79
Device Configuration > Client-Info.......................................................... 80
Device Configuration > Multi-SSID......................................................... 81
Device Configuration > SNTP................................................................. 83
Device Configuration > Misc................................................................... 84
Device Configuration > Misc................................................................... 85
Device Configuration > SSL.................................................................... 86
Configuration Files.................................................................................. 87
Firmware................................................................................................. 89
System Settings...................................................................................... 90
Refresh................................................................................................... 91
About...................................................................................................... 91
Using the Console Port................................................................................... 92
Networking Basics.......................................................................................... 95
Naming Your Computer......................................................................... 102
Checking the IP Address in Windows® XP............................................ 103
Assigning a Static IP Address in Windows® XP/2000........................... 105
Assigning a Static IP Address in Macintosh® OSX............................... 107
D-Link Systems, Inc.
DWL-2700AP User’s Manual
Checking the Wireless Connection by Pinging..................................... 110
Troubleshooting............................................................................................. 111
High Gain External Antenna (Optional)................................................ 117
Technical Specifications............................................................................... 118
Technical Support......................................................................................... 121
Warranty......................................................................................................... 122
Registration.................................................................................................... 129
D-Link Systems, Inc.
DWL-2700AP User’s Manual
Package Contents
Package Contents
 D-Link AirPremierTM DWL-2700AP
802.11G Outdoor Wireless AP/Bridge
 Eight screws & one rubber ring
 Two rubber dipole antennas
 Manual on CD
 Quick Installation Guide
 2 Mounting Kits
 PoE base unit
 Power adapter
 Power cord
 RF jumper cable
 Grounding wire
 Surge arrestor
 30m Ethernet cable
 Console Cables
Note: Using a power supply with a different voltage than the one included with the
DWL-2700AP will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.
Minimum System Requirements
 Computers with Windows®, Macintosh®, or Linux-based operating systems with
an installed Ethernet Adapter
 Internet Explorer version 6.0 or Netscape Navigator™ version 7.0 and above
D-Link Systems, Inc.
DWL-2700AP User’s Manual
Introduction
Introduction
The DWL-2700AP, a reliable high-performance wireless outdoor solution, is an ideal
addition to business networks seeking to extend wireless signal coverage. With the
DWL-2700AP, bandwidth-intensive applications like graphics or multimedia will benefit
significantly because large files are able to move across the network quickly.
The DWL-2700AP is capable of operating in one of 3 different modes to meet your
wireless networking needs. The DWL-2700AP can operate as an access point, or in
WDS (Wireless Distribution System) with AP, or in WDS mode.
Use less wiring, enjoy increased flexibility, save time and money with PoE (Power over
Ethernet). With PoE, the DWL-2700AP shares power and data over the CAT5 cable,
making the setup of your network less expensive and more convenient.
An ideal solution for quickly creating and extending a wireless local area network (WLAN)
in offices or other workplaces, trade shows and special events, the DWL-2700AP provides
data transfers at up to 54Mbps* when used with other D-Link Air Premier® products
(The 802.11g standard is backwards compatible with 802.11b devices).
WPA is offered in two flavors: Enterprise (used for corporations), and Personal (used
for home users).
WPA-Personal and WPA2-Personal is directed at home users who do not have the
server based equipment required for user authentication. The method of authentication
is similar to WEP because you define a “Pre-Shared Key” on the wireless router/AP.
Once the pre-shared key is confirmed and satisfied on both the client and access point,
then access is granted. The encryption method used is referred to as the Temporal Key
Integrity Protocol (TKIP), which offers per-packet dynamic hashing. It also includes an
integrity checking feature which ensures that the packets were not tampered with during
wireless transmission. WPA2-Personal is far superior to WPA-Personal, because the
encryption of data is upgraded with the Advanced Encryption Standard (AES).
*Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead,
lower actual data throughput rate. Environmental factors may adversely affect wireless signal range.
D-Link Systems, Inc.
DWL-2700AP User’s Manual
Introduction
Introduction (continued)
WPA-Enterprise and WPA2-Enterprise is ideal for businesses that have existing
security infrastructures in place. Management and security implementation can now
be centralized on a server participating on the network. Utilizing 802.1x with a RADIUS
(Remote Authentication Dial-in User Service) server, a network administrator can
define a list of authorized users who can access the wireless LAN. When attempting to
access a wireless LAN with either WPA-Enterprise or WPA2-Enterprise configured,
the new client will be challenged with a username and password. If the new client is
authorized by the administration, and enters the correct username and password, then
access is granted. In a scenario where an employee leaves the company, the network
administrator can remove the employee from the authorized list and not have to worry
about the network being compromised by a former employee. WPA2-Enterprise is
far superior to WPA-Enterprise, because the encryption of data is upgraded with the
Advanced Encryption Standard (AES).
802.1x: Authentication which is a first line of defense against intrusion. In the
authentication process, the Authentication Server verifies the identity of the client
attempting to connect to the network. Unfamiliar clients would be denied access.
EAP (Extensible Authentication Protocol) is available through the Windows® XP
Operating System. You will need to use the same type of EAP protocol on all the devices
in your network when using the 802.1x feature.
D-Link Systems, Inc.
DWL-2700AP User’s Manual
Features and Benefits
Features and Benefits
 3 Different Operation modes - Capable of operating in one of three different
operation modes to meet your wireless networking requirements: Access Point;
WDS with AP; or WDS.
 Easy Installation with PoE (Power over Ethernet).
 Faster wireless networking speeds up to 54Mbps*.
 Compatible with 802.11b and 802.11g Devices that is fully compatible with the
IEEE 802.11b and 802.11g standards, the DWL-2700AP can connect with existing
802.11b or 802.11g compliant wireless network adapter cards.
 Compatible with the 802.11b standard to provide a wireless data rate of up to
11Mbps - that means you can migrate your system to the 802.11g standard on
your own schedule without sacrificing connectivity.
 Better security with WPA - The DWL-2700AP can securely connect wireless clients
on the network using WPA (Wi-Fi Protected Access) providing a much higher level
of security for your data and communications than has previously been available.
 AP Manager Setup Wizard - The new Setup Wizard makes network configuration
quick and simple.
 SNMP for Management - The DWL-2700AP is not just fast but it also supports
SNMP v.3 for a better network management. Superior wireless AP manager
software is bundled with the DWL-2700AP for network configuration and firmware
upgrade. Systems administrators can also setup the DWL-2700AP easily with
the Web-based configuration. A D-Link D-View module will be downloadable
for network administration and real-time network traffic monitoring with D-Link
D-View software.
 Utilizes OFDM technology (Orthogonal Frequency Division Multiplexing).
 Operates in the 2.4GHz frequency range for an 802.11b and 802.11g network.
 Web-based interface for managing and configuring.
*Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead,
lower actual data throughput rate. Environmental factors may adversely affect wireless signal range.
D-Link Systems, Inc.
DWL-2700AP User’s Manual
Wireless Basics
Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and
compatible high-speed wireless connectivity within your home, business or public
access wireless networks. D-Link wireless products will allow you to access the data you
want, when and where you want it. You will be able to enjoy the freedom that wireless
networking brings.
A Wireless Local Area Network (WLAN) is a computer network that transmits and
receives data with radio signals instead of wires. WLANs are used increasingly in both
home and office environments, and public areas such as airports, coffee shops and
universities. Innovative ways to utilize WLAN technology are helping people to work
and communicate more efficiently. Increased mobility and the absence of cabling and
other fixed infrastructure have proven to be beneficial for many users.
Wireless users can use the same applications they use on a wired network. Wireless
adapter cards used on laptop and desktop systems support the same protocols as
Ethernet adapter cards.
People use WLAN technology for many different purposes:
Mobility - Productivity increases when people have access to data in any location
within the operating range of the WLAN. Management decisions based on real-time
information can significantly improve worker efficiency.
Low Implementation Costs - WLANs are easy to set up, manage, change and relocate.
Networks that frequently change can benefit from WLANs ease of implementation.
WLANs can operate in locations where installation of wiring may be impractical.
Installation and Network Expansion - Installing a WLAN system can be fast and easy
and can eliminate the need to pull cable through walls and ceilings. Wireless technology
allows the network to go where wires cannot go - even outside the home or office.
Inexpensive Solution - Wireless network devices are as competitively priced as
conventional Ethernet network devices. The DWL-2700AP saves money by providing
multi-functionality, configurable in one of three different modes.
Scalability - WLANs can be configured in a variety of ways to meet the needs of
specific applications and installations. Configurations are easily changed and range
from Peer-to-Peer networks suitable for a small number of users to larger Infrastructure
networks to accommodate hundreds or thousands of users, depending on the number
of wireless devices deployed.
D-Link Systems, Inc.
DWL-2700AP User’s Manual
Wireless Basics
Wireless Basics (continued)
Standards-based Technology
The DWL-2700AP Wireless Access Point utilizes the 802.11b and the 802.11g
standards.
The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the
maximum wireless signal rate of up to 54Mbps* within the 2.4GHz band, utilizing OFDM
technology.
This means that in most environments, within the specified range of this device, you will
be able to transfer large files quickly or even watch a movie in MPEG format over your
network without noticeable delays. This technology works by transmitting high-speed
digital data over a radio wave utilizing OFDM (Orthogonal Frequency Division Multiplexing)
technology. OFDM works by splitting the radio signal into multiple smaller sub-signals
that are then transmitted simultaneously at different frequencies to the receiver. OFDM
reduces the amount of crosstalk (interference) in signal transmissions.
The D-Link DWL-2700AP will automatically sense the best possible connection speed
to ensure the greatest speed and range possible.
The DWL-2700AP offers the most advanced network security features available today,
including WPA and WPA2.
In addition to its compatibility with 802.11g devices, the DWL-2700AP is compatible
with 802.11b devices. This means that if you have an existing 802.11b network, or a
network with a mixture of 802.11g and 802.11b, the devices in that network will be
compatible with the DWL-2700AP.
*Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead,
lower actual data throughput rate. Environmental factors may adversely affect wireless signal range.
D-Link Systems, Inc.
10
DWL-2700AP User’s Manual
Wireless Basics
Wireless Basics (continued)
Installation Considerations
The D-Link Air Premier® DWL-2700AP lets you access your network, using a wireless
connection, from virtually anywhere within its operating range. Keep in mind, however,
that the number, thickness and location of walls, ceilings, or other objects that the
wireless signals must pass through, may limit the range. Typical ranges vary depending
on the types of materials and background RF (radio frequency) noise in your home or
business. The key to maximizing wireless range is to follow these basic guidelines:
1		 Keep the number of walls and ceilings between the DWL-2700AP and other network
devices to a minimum - each wall or ceiling can reduce your DWL-2700AP’s range
from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or
ceilings is minimized.
2 Be aware of the direct line between network devices. A wall that is 1.5 feet thick
(.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a
2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the
signal will travel straight through a wall or ceiling (instead of at an angle) for better
reception.
3 Building materials can impede the wireless signal - a solid metal door or aluminum
studs may have a negative effect on range. Try to position wireless devices and
computers with wireless adapters so that the signal passes through drywall or open
doorways and not other materials.
4 Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or
appliances that generate RF noise.
D-Link Systems, Inc.
11
DWL-2700AP User’s Manual
Operational Modes
Three Operational Modes
D-Link Systems, Inc.
12
DWL-2700AP User’s Manual
Getting Started
Getting Started
You will need broadband Internet access.
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to a Router.
(See the printed Hardware Installation Guide included with your router.)
Connect the Ethernet Broadband Router to the PoE base unit.
(See the printed Hardware Installation Guide included with the DWL-2700AP.)
Connect the DWL-2700AP to the PoE base unit.
(See the printed Hardware Installation Guide included with the DWL-2700AP.)
If you are connecting a desktop computer to your network, install the D-Link
DWL-G550 wireless PCI adapter into an available PCI slot on your desktop
computer.
Install the drivers for the D-Link DWL-G680 wireless Cardbus adapter into a
laptop computer.
D-Link Systems, Inc.
13
DWL-2700AP User’s Manual
Getting Started
Connecting To a PoE (Power over Ethernet) Network
Step 1: Connect one end of an Ethernet cable (included with your package) to the
LAN port on the DWL-2700AP and the other end of the Ethernet cable to
the port labeled P+DATA OUT on the PoE base unit.
Step 2: Connect another Ethernet cable from the DATA IN port on the PoE base
unit to your router/switch or to a PC.
Step 3: Attach the power adapter to the connector on the PoE base unit. Attach the
power cord to the power adapter and into an electrical outlet.		
D-Link Systems, Inc.
14
DWL-2700AP User’s Manual
Using the Configuration Menu
Using the Configuration Menu
To configure the DWL-2700AP, use a computer which is connected to the DWL-2700AP
with an Ethernet cable (see the Network Layout diagram).
First, disable the Access the Internet using a proxy server function. To disable this
function, go to Control Panel > Internet Options > Connections > LAN Settings
and uncheck the enable box.
Start your web browser program (Internet Explorer, Netscape Navigator™).
Type the IP address and http port of the DWL-2700AP in the address field
(http://192.168.0.50) and press Enter. Make sure that the IP addresses of the
DWL-2700AP and your computer are in the same subnet.
After the connection is established, you will see the user identification window as
shown.
Note: If you have changed the default IP address assigned to the DWL-2700AP, make
sure to enter the correct IP address.

Type admin in the User Name field

Leave the Password field blank

Click OK
Note: If you have changed the password, make sure to enter the correct
password.
D-Link Systems, Inc.
15
Using the Configuration Menu
DWL-2700AP User’s Manual
Configuration > Save and Activate
Clicking Save and Activate will save and activate all changes made to the configuration
and reboot the system.
Clicking Discard Changes will discard all changes made to the configuration.
Click the Apply button to save changes made to
the current page. Please note that you still must
select Save and Activate under Configuration in
order for changes to take effect.
D-Link Systems, Inc.
16
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Basic Settings > Wireless > Access Point
Wireless Band: IEEE 802.11g.
Mode: Access Point is selected from the drop-down menu.
SSID: Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID factory default setting
is dlink. The SSID can be easily changed to connect to an existing
wireless network or to establish a new wireless network.
SSID Broadcast: Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
Channel: Auto Channel Scan is selected by default. All devices on the
network must share the same channel.
Radio Frequency: The radio frequency will vary depending on the wireless channel
that is chosen. The frequency in channel 6 is 2.437GHz.
D-Link Systems, Inc.
17
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Basic Settings > Wireless > Access Point (continued)
Auto Channel
Scan:
Select Enable or Disable. Enable this feature to auto-select the
channel for best wireless performance.
Authentication:
Select Open System to communicate the key across the
network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-Enterprise to secure your network with the inclusion
of a RADIUS server.
Select WPA-Personal to secure your network using a password
and dynamic key changes (No RADIUS server required).
Select WPA2-Enterprise to secure your network with the inclusion
of a RADIUS server and upgrade the encryption of data with the
Advanced Encryption Standard (AES).
Select WPA2-Personal to secure your network using a password
and dynamic key changes. No RADIUS server required and
encryption of data is upgraded with the Advanced Encryption
Standard (AES).
Select WPA-Auto-Enterprise to allow the client to either use
WPA-Enterprise or WPA2-Enterprise.
Select WPA-Auto-Personal to allow the client to either use
WPA-Personal or WPA2-Personal.
D-Link Systems, Inc.
18
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Basic Settings > Wireless > Access Point
(WEP)
Encryption:
Select Disabled or Enabled. (Disabled is selected here).
Key Type:
Select HEX or ASCII.
Key Size:
Select 64-bit, 128-bit, or 152 bits.
Valid Key:
First through Fourth
keys:
Select the 1st through the 4th key to be the active key.
Input up to four keys for encryption. You will select one of these
keys in the valid key field.
* Hexadecimal digits consist of the numbers 0-9 and the letters A-F.
ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers 0-127.
D-Link Systems, Inc.
19
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Basic Settings > Wireless > Access Point
(802.1x)
Cipher Type:
Group Key Update
Interval:
RADIUS Server:
RADIUS Port:
RADIUS Secret:
D-Link Systems, Inc.
WEP is selected.
Select the interval during which the group key will be valid.
1800 is the recommended value. A lower interval may reduce
transfer data rate.
Enter the IP address of the RADIUS server.
Enter the RADIUS port.
Enter the RADIUS secret.
20
Using the Configuration Menu
DWL-2700AP User’s Manual
Home > Basic Settings > Wireless > Access Point
(WPA/WPA2-Enterprise/WPA-Auto-Enterprise)
Cipher Type:
When you select WPA-Enterprise, WPA2-Enterprise or
WPA-Auto-Enterprise, you must select AUTO, AES, or TKIP
from the pull-down menu.
Group Key Update
Interval:
Select the interval during which the group key will be valid. 1800
is the recommended value. A lower interval may reduce transfer
data rate.
RADIUS Server:
RADIUS Port:
RADIUS Secret:
D-Link Systems, Inc.
Enter the IP address of the RADIUS server.
Enter the RADIUS port.
Enter the RADIUS secret.
21
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Basic Settings > Wireless > Access Point
(WPA/WPA2-Personal/WPA2-Auto-Personal)
Cipher Type:
Group Key Update
Interval:
PassPhrase:
D-Link Systems, Inc.
W h e n y o u s e l e c t W PA - P e r s o n a l , W PA 2 - P e r s o n a l , o r
WPA-Auto-Personal, you must select AUTO, AES, or TKIP from
the pull-down menu.
Select the interval during which the group key will be valid. The
default value of 1800 is recommended.
Enter a passphrase. The passphrase is an alpha-numeric password
between 8 and 63 characters long. The password can include symbols
(!?*&_) and spaces. Make sure you enter this key exactly the same on all
other wireless clients.
22
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Basic Settings > Wireless > WDS with AP
In WDS with AP mode, the DWL-2700AP wirelessly connects multiple networks, while
still functioning as a wireless AP. WDS (Wireless Distribution System) allows access
points to communicate with one another wirelessly in a standardized way. It can also
simplify the network infrastructure by reducing the amount of cabling required. Basically
the access points will act as a client and an access point at the same time.
Wireless Band:
D-Link Systems, Inc.
IEEE 802.11g
Mode:
WDS with AP is selected from the pull-down menu.
SSID:
Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID factory default
setting is dlink. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.
23
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Basic Settings >Wireless > WDS with AP (continued)
SSID Broadcast:
Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
Channel:
6 is the default channel for IEEE 802.11g. All devices on the network
must share the same channel.
Note: The wireless adapters will automatically scan and match the
wireless setting.
Auto Channel
Scan:
This option is unavailable in WDS with AP mode.
Remote AP MAC
Address:
Enter the MAC addresses of the APs in your network that will serve
as bridges to wirelessly connect multiple networks.
Scan:
Click Scan to view available APs in your network that will serve as
bridges.
Authentication:
Select Open System to communicate the key across the
network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-Personal, WPA2-Personal or WPA-Auto-Personal to
secure your network using a password and dynamic key changes
(No RADIUS server required).
Note: WDS is not completely specified in WiFi or IEEE standards. Communication
with other vendor’s access points is not guaranteed.
D-Link Systems, Inc.
24
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Basic Settings > Wireless > WDS with AP
(WEP)
Encryption:
Select Disabled or Enabled. (Disabled is selected here).
Key Type:
Select HEX or ASCII.
Key Size:
Select 64-bit, 128-bit, or 152 bits.
Valid Key:
First through Fourth
keys:
Select the 1st through the 4th key to be the active key.
Input up to four keys for encryption. You will select one of these
keys in the valid key field.
* Hexadecimal digits consist of the numbers 0-9 and the letters A-F.
ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers 0-127.
D-Link Systems, Inc.
25
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Basic Settings > Wireless > WDS with AP
(WPA/WPA2-Personal / WPA-Auto-Personal)
Cipher Type:
When you select WPA-Personal, WPA2-Personal or WPA-Auto-Personal
you must select AUTO or AES from the pull-down menu.
Group Key Update
Interval:
Select the interval during which the group key will be valid. The
default value of 1800 is recommended.
PassPhrase:
Enter a passphrase. The passphrase is an alpha-numeric password
between 8 and 63 characters long. The password can include symbols
(!?*&_) and spaces. Make sure you enter this key exactly the same on all
other wireless clients.
D-Link Systems, Inc.
26
Using the Configuration Menu
DWL-2700AP User’s Manual
Home > Basic Settings > Wireless > WDS
In WDS, the DWL-2700AP wirelessly connects multiple networks, without functioning
as a wireless AP.
Wireless Band:
Mode:
SSID:
D-Link Systems, Inc.
IEEE 802.11g
WDS is selected from the pull-down menu.
Service Set Identifier (SSID) is the name designated for a specific wireless
local area network (WLAN). The SSID factory default setting is default. The
SSID can be easily changed to connect to an existing wireless network,
or to establish a new wireless network.
27
Using the Configuration Menu
DWL-2700AP User’s Manual
Home > Basic Settings > Wireless > WDS (continued)
SSID Broadcast:
Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
Channel:
6 is the default channel for IEEE 802.11g. All devices on the network
must share the same channel.
Note: The wireless adapters will automatically scan and match the
wireless setting.
Auto Channel
Scan:
This option is unavailable in WDS.
Remote AP MAC
Address:
Enter the MAC addresses of the APs in your network that will serve
as bridges to wirelessly connect multiple networks.
Scan:
Click Scan to view available APs in your network that will serve
as bridges.
Authentication:
Select Open System to communicate the key across the
network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-Personal, WPA2-Personal, or WPA-Auto-Personal to
secure your network using a password and dynamic key changes
(No RADIUS server required).
D-Link Systems, Inc.
28
Using the Configuration Menu
DWL-2700AP User’s Manual
Home > Basic Settings > Wireless > WDS (WEP)
Encryption:
Select Disabled or Enabled. (Disabled is selected here).
Key Type:
Select HEX or ASCII.
Key Size:
Select 64-bit, 128-bit, or 152 bits.
Valid Key:
First through Fourth
keys:
Select the 1st through the 4th key to be the active key.
Input up to four keys for encryption. You will select one of these
keys in the valid key field.
* Hexadecimal digits consist of the numbers 0-9 and the letters A-F.
ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers 0-127.
D-Link Systems, Inc.
29
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Basic Settings > Wireless > WDS
(WPA/WPA2-Personal / WPA-Auto-Personal)
Cipher Type:
When you select WPA-Personal, WPA2-Personal or
WPA-Auto-Personal, AES is selected as the Cipher Type.
Group Key Update
Interval:
Select the interval during which the group key will be valid. The
default value of 1800 is recommended.
PassPhrase:
When you select WPA-Personal, WPA2-Personal or WPA-Auto-Personal,
please enter a PassPhrase in the corresponding field.
D-Link Systems, Inc.
30
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Basic Settings > Wireless Modes
AP Mode
Authentication Available
Access Point
Open System
Shared Key
Open System/Shared Key
802.1x
WPA-Enterprise
WPA-Personal
WPA2-Enterprise
WPA2-Personal
WPA-Auto-Enterprise
WPA-Auto-Personal
WDS with AP
Open System
Shared Key
Open System/Shared Key
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
WDS
Open System
Shared Key
Open System/Shared Key
WPA2-Personal
WPA-Personal
WPA-Auto-Personal
D-Link Systems, Inc.
31
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Basic Settings > LAN > Static
LAN is short for Local Area Network. This is considered your internal network. These
are the IP settings of the LAN interface for the DWL-2700AP. These settings may be
referred to as private settings. You may change the LAN IP address if needed. The LAN
IP address is private to your internal network and cannot be seen on the Internet.
Get IP From: Static (Manual) is chosen here. Choose this option if you do not have
a DHCP server in your network, or if you wish to assign a static IP
address to the DWL-2700AP.
IP Address: The default IP address is 192.168.0.50. Assign a static IP address
that is within the IP address range of your network.
Subnet Mask: Enter the subnet mask. All devices in the network must share the
same subnet mask..
Default Gateway: Enter the IP address of the gateway in your network. If there isn’t
a gateway in your network, please enter an IP address within the
range of your network.
DNS 1: Enter your primary DNS IP address.
DNS 2: Enter your secondary DNS IP address.
D-Link Systems, Inc.
32
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Basic Settings > LAN > Dynamic
Get IP From: Dynamic (DHCP) is chosen here. Choose Dynamic IP Address to
obtain an IP Address automatically from a DHCP server in your
network.
IP Address: This field is unavailable when DHCP is selected.
Subnet Mask: This field is unavailable when DHCP is selected
Default Gateway: This field is unavailable when DHCP is selected.
DNS 1: This field is unavailable when DHCP is selected.
DNS 2: This field is unavailable when DHCP is selected.
D-Link Systems, Inc.
33
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Advanced Settings > Performance
Wireless Band: IEEE 802.11g.
Frequency: The frequency reflects the choice of the wireless channel. When
IEEE 802.11g is chosen the frequency is 2.437GHz for channel 6.
Channel: The default channel for IEEE 802.11g is 6.
Data Rate: The Data Rates are Auto, 6Mbps, 9Mbps, 12Mbps, 18Mbps, 24Mbps,
36Mbps, 48Mbps, 54Mbps.
Beacon Interval: Beacons are packets sent by an access point to synchronize a
network. Specify a beacon interval value. The default (100) is
recommended.
D-Link Systems, Inc.
34
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Advanced Settings > Performance (continued)
DTIM: (Delivery Traffic Indication Message) - Select a setting between 1
and 255. 1 is the default setting. DTIM is a countdown informing
clients of the next window for listening to broadcast and multicast
messages.
Fragment Length: The fragmentation threshold, which is specified in bytes, determines
whether packets will be fragmented. Packets exceeding the 2346
byte setting will be fragmented before transmission. 2346 is the
default setting
RTS Length: This value should remain at its default setting of 2346. If you
encounter inconsistent data flow, only minor modifications to the
value range between 256 and 2346 are recommended
Radio: Select ON or OFF.
WMM: (Wi-Fi Multimedia) Improves the user experience for audio, video,
and voice applications over a Wi-Fi network. This feature is enabled
by default, uncheck to disable.
Wireless B/G: Select Mixed for both 802.11b and 802.11g, 11b for 802.11b
only, or 11g for 802.11g only.
Antenna Diversity: Select Diversity to allow the DWL-2700AP to automatically
switch to the antenna with the better RSSI value. Selecting Left
Antenna will not allow the DWL-2700AP to switch antenna and
the radio will use the left antenna (facing the AP) to transmit and
receive packets. Selecting Right Antenna will not allow the
DWL-2700AP to switch antenna and the radio will only use the
right antenna (facing the AP) to transmit and receive packets.
*Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead,
lower actual data throughput rate. Environmental factors may adversely affect wireless signal range.
D-Link Systems, Inc.
35
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Advanced Settings> AP Grouping Settings
Load Balance: Load Balancing allows you to balance and share the wireless network traffic and clients using multiple DWL-2700APs. Select Enable
or Disable.
User Limit: Sets the maximum amount of users allowed (0-64).
Link Integrate: If the Ethernet connection between the LAN and the DWL-2700AP
is disconnected, the Link Integrate option will cause the wireless
segment associated with the AP to be disconnected from the AP.
Select Enable or Disable.
D-Link Systems, Inc.
36
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Advanced Settings > Multi-SSID Settings
Enable
Check to enable Multi-SSID
Multi-SSID:
Enable VLAN Check to enable VLANs.
State:
Band: IEEE802.11g.
Index: Select the Index you want to configure, Primary or Multi-SSID
1 through Multi-SSID 7. Primary SSID and security cannot be
configured here, as those values follow the settings configured on
the Home > Basic Settings > Wireless page.
SSID: Service Set Identifier (SSID) is the unique name designated for the
Index being configured.
D-Link Systems, Inc.
37
DWL-2700AP User’s Manual
Home > Advanced Settings > Multi-SSID (continued)
SSID Broadcast: Enabled by default, disabling SSID Broadcast will make the SSID
invisible. Select Enable or Disable.
Security: The Security options available are Open-System, Shared Key,
WPA-Personal, WPA2-Personal, or WPA-Auto-Personal.
Note: Security Setting Limit:
When the Primary SSID is set to use one key index for WEP, you can use the 3 other
key indexes for Guest SSIDs.
If the Primary SSID is set to WPA/WPA2-Personal, or WPA-Auto-Personal, you can
only use WEP key index 1 and 4 for Guest SSIDs.
Key Type: Select HEX or ASCII. (Only when Open System or Shared Key
Security is selected.)
Key Size: Select 64-bit, 128-bit or 152-bit. (Only when Open System or Shared
Key is selected for Security.)
Key: Select from 1 of 4 Keys to be the active key. (Only when Open System
or Shared Key is selected for Security.)
Cipher Type: When using WPA-Personal, WPA2-Personal, or WPA-Auto-Personal,
you must select a cipher type. Available options are Auto, AES, or
TKIP.
Group Key Select the interval during which the group key will remain valid.
Update Interval: 1800 is the recommended value, as a lower value may reduce the
transfer rate.
PassPhrase: The passphrase is an alpha-numeric password that must be between
8-63 characters long. The password can include symbols (!?*_) and
spaces. Make sure to enter the passphrase exactly the same on all
wireless clients.
D-Link Systems, Inc.
38
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Filters > Ethernet MAC ACL
Access Control: Select Off to disable MAC address filtering. Select Accept to allow
association between the DWL-2700AP and the MAC addresses
listed. Select Reject to reject devices with the MAC address listed.
MAC Address: Enter the MAC address you want to include in the Access Control
List and click Apply.
MAC Address List: MAC addresses added to the Access Control List will appear in this
list. Click Delete next to a MAC address to remove it from the list.
D-Link Systems, Inc.
39
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Filters > Wireless MAC ACL
Wireless Band: IEEE 802.11g
Access Control: Select Off to disable MAC address filtering. Select Accept to allow
association between the DWL-2700AP and the MAC addresses
listed. Select Reject to reject devices with the MAC addresses
listed.
MAC Address: Enter the MAC address you want to include in the Access Control
List and click Apply.
MAC Address List: MAC addresses added to the Access Control List will appear in this
list. Click Delete next to a MAC address to remove it from the list.
D-Link Systems, Inc.
40
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Filters > Wireless IP ACL
Access Control: Select Off to disable IP address filtering. Select Accept to allow
association between the DWL-2700AP and the IP addresses listed.
Select Reject to reject devices with the IP addresses listed.
IP Address: Enter the IP address you want to include in the Access Control List
and click Apply.
IP Address List: IP addresses added to the Access Control List will appear in this list.
Click Delete next to an IP address to remove it from the list.
D-Link Systems, Inc.
41
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Filters > WLAN Partition Settings
Wireless Band: IEEE 802.11g.
Internal Station Enabling this feature allows wireless clients to communicate with
Connection: each other. If this feature is disabled, wireless stations on the
selected band are not allowed to exchange data through the access
point.
Ethernet to WLAN Enabling this feature allows Ethernet devices on the LAN to
Access: communicate with wireless clients on the WLAN. If this feature is
disabled, all data from Ethernet devices to wireless clients is blocked.
Wireless devices can still send data to Ethernet devices.
D-Link Systems, Inc.
42
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Status > Device Information
Device Information: This window displays the configuration settings of the DWL-2700AP,
including the firmware version and device MAC address.
D-Link Systems, Inc.
43
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Status > Indication
Temperature This window displays the current operating temperature of the
Indication: DWL-2700AP.
D-Link Systems, Inc.
44
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Status > Client Information
Client Information: The Client Information page provides information about the wireless
clients connected to the DWL-2700AP.
The following information is available for each client communicating with the
DWL-2700AP.
MAC: Displays the MAC address of the client.
Band: Displays the wireless band the client is connected on.
Authentication: Displays the type of authentication being used.
Signal: Displays the strength of the clients signal.
Power Saving Displays the status of the power saving feature.
Mode:
D-Link Systems, Inc.
45
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Status > WDS Information
MAC: Displays the MAC address of the client.
Band: Displays the wireless band the client is connected on.
Authentication: Displays the type of authentication being used.
Signal: Displays the strength of the clients signal.
Channel: Displays the wireless channel being used.
D-Link Systems, Inc.
46
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Status > WLAN 802.11G Traffic Statistics
WLAN 802.11g This page displays statistics for data throughput, transmitted and
Traffic Statistics: received frames, and WEP frame errors for the 802.11g wireless
network.
D-Link Systems, Inc.
47
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Log > View Log
View Log: The log displays system and network messages including a time
stamp and message type.
D-Link Systems, Inc.
48
DWL-2700AP User’s Manual
Using the Configuration Menu
Home > Log > System Log Settings
Log Settings
Log Server / IP Enter the IP address of the server you would like to send the
Address: DWL-2700APs log to.
Log Type: Check the box for the type of activity you want to log. There are
three types: System, Wireless and Notice.
SMTP Settings
SMTP: Check the box to enable SMTP.
SMTP Server / IP Enter the IP address of the SMTP server.
Address:
SMTP Sender: Enter the e-mail address of the SMTP sender.
SMTP Recipient: Enter the e-mail address of the SMTP recipient.
D-Link Systems, Inc.
49
DWL-2700AP User’s Manual
Using the Configuration Menu
Tool > Administrator Settings
Limit
Check the box to enable the feature.
Administrator IP
Limit Administrator Enter the IP address that the administrator will be allowed to log
IP 1: in from.
Limit Administrator Enter a secondary IP address that the administrator will be allowed
IP 2: to log in from.
Login Settings
User Name: Enter a user name. The default is admin.
Old Password: When changing your password, enter the old password here.
New Password: When changing your password, enter the new password here.
Confirm New Confirm your new password here.
Password:
D-Link Systems, Inc.
50
DWL-2700AP User’s Manual
Using the Configuration Menu
Tool > Administrator Settings (continued)
Console Settings
Status: Status is Enabled by default. Uncheck the box to disable the
console.
Console Protocol: Select the type of protocol you would like to use, Telnet or SSH.
SNMP Settings
Status: Status is Enabled by default. Uncheck the box to disable the SNMP
functions.
Public Community Enter the public SNMP community string.
String:
Private Community Enter the private SNMP community string.
String:
D-Link Systems, Inc.
51
DWL-2700AP User’s Manual
Tool > Firmware and SSL Certification Upload
Upload Firmware After downloading the most recent version of firmware for the
DWL-2700AP from http://support.dlink.com to your local computer,
use the Browse button to locate the firmware file on your computer.
Click Upload to update the firmware version.
Upload SSL Click Browse to locate the SSL Certification file on your local
Certification: computer. After selecting and opening the file, click Upload to
upload the file to the DWL-2700AP.
D-Link Systems, Inc.
52
DWL-2700AP User’s Manual
Tool > Configuration File Upload and Download
Upload File: Click Browse to locate a previously saved configuration file on
your local computer. After selecting the file, click Upload to apply
the configuration settings to the DWL-2700AP.
Download Click Download to save the current DWL-2700AP configuration
Configuration File: to your local computer.
D-Link Systems, Inc.
53
DWL-2700AP User’s Manual
Using the Configuration Menu
Tool > Cfg File > Choose file
When you click Browse in the previous screen, the dialog box shown above appears.
Select the file you wish to download and click Open.
When this dialog box appears, click Save and select a location to save the configuration
file.
D-Link Systems, Inc.
54
Using the Configuration Menu
DWL-2700AP User’s Manual
Tool > SNTP
SNTP/NTP
Information:
SNT/NTP Server
IP Address:
SNTP/NTP
Time Zone:
Daylight Saving
Time:
D-Link Systems, Inc.
Displays the current SNTP/NTP settings.
Enter the SNTP/NTP server IP address.
Select your correct Time Zone.
Check the box to Enable Daylight Saving Time.
55
DWL-2700AP User’s Manual
Using the Configuration Menu
System > System Settings
Click Restart to restart the DWL-2700AP.
Click Restore to restore the DWL-2700AP back to factory default settings.
D-Link Systems, Inc.
56
DWL-2700AP User’s Manual
Using the AP Manager
Using the AP Manager
The AP Manager is a convenient tool to manage the configuration of your network from a
central computer. With AP Manager there is no need to configure devices individually.
To launch the AP Manager:
• Go to the Start Menu
• Select Programs
• Select D-Link AirPremier AP Manager
• Select DWL-2700AP
Discovering Devices
Click on this button to discover the devices available on the network.
D-Link Systems, Inc.
57
DWL-2700AP User’s Manual
Using the AP Manager
Selecting Devices
The AP Manager allows you to configure multiple devices all at once. To select a single
device, simply click on the device you want to select. To select multiple devices, hold
down the Ctrl key while clicking on each additional device. To select an entire list, hold
the Shift key, click on the first AP on the list and then click on the last AP on the list.
IP Configuration
You can assign an IP address to an AP or assign IP addresses to multiple
APs by clicking on this button after selecting the device(s).
Select the AP that you want to assign an IP address to and click the IP button. Enter
the IP address and IP netmask for the selected device and click OK.
You can configure multiple APs with IP addresses all at once. Click on the IP button
after you’ve selected all of the APs you want to assign an IP address. Enter the IP
address you want to assign the first unit and the AP manager will automatically assign
sequential IP addresses.
D-Link Systems, Inc.
58
Using the AP Manager
DWL-2700AP User’s Manual
Device Configuration
Click on this button to access the configuration
properties of the selected device(s).
The device configuration window allows you to configure settings but does not actually
apply the settings to the device unless you click the Apply button. You can also save
and load configuration files from this window. When you load a configuration file, you
must click Apply if you want the settings to be applied to the selected device(s).
You can configure a single device by highlighting one device in the list, or you can
configure multiple devices by highlighting multiple devices before clicking on the Device
Configuration icon pictured above. The examples in this section show single device
configuration. When you select multiple devices for configuration the procedure will be
similar.
The Check All button will select all configurable options. Any setting
that has a check mark next to it is applied to the device or saved to
the configuration file.
The Clear Checks button deselects all configurable options. This
feature is useful if you only want to change a few settings. Deselect
all items and only check the items that you want to modify.
Refresh will revert to the actual device settings of the selected
device(s).
To save settings to the device, you must click the Apply button. Only
settings that have a check mark next to them will be applied.
The open button is used to load a previously saved configuration file.
After opening a configuration file, you must click the Apply button to
save the settings to the selected device(s).
The save button allows you to save a configuration file of the selected
device settings. Only settings that have a check mark next to them
are saved. You cannot save a configuration file if you selected more
than one device in the device list.
The Exit button will close the device configuration window. Any
settings that haven’t been applied will be lost.
D-Link Systems, Inc.
59
Using the AP Manager
DWL-2700AP User’s Manual
Device Configuration > General
When selecting multiple devices for configuration, some options are
unavailable for configuration by default as noted(*) below:
Device Name(*): This allows you to change the device name for the selected
access point. You must place a check mark in the Device Name
box to change the name. This option should only be configured
when one access point is selected for configuration.
IP address and If you’ve selected one device for configuration and you want
Subnet Mask(*): to change the IP address of the device, check the IP Address
box. You can then enter an IP address and Subnet Mask for the
selected access point. This option should only be configurable
when one access point is selected for configuration. To configure
multiple devices with an IP address at one time, please reference
the previous page.
Gateway:
D-Link Systems, Inc.
Enter the IP address of your gateway, typically your router
address.
60
DWL-2700AP User’s Manual
Using the AP Manager
Device Configuration > General (continued)
Domain Name
Server 1: Enter the IP address of your primary Domain Name Server.
Domain Name Enter the IP address of your secondary Domain Name Server.
Server 2:
Load Balance: This pull down selection enables or disabled load balancing. When
Load Balance is enabled, it allows several DWL-2700APs to balance
wireless network traffic and wireless clients. All the access points
must have Load Balance enabled and have the same SSID. It is
recommended that each access point be assigned non-overlapping
wireless channels. (e.g. 1, 6, 11)
User Limit: Enter the number of load balancing users, from 0-64.
Link Integrity: This pull-down selection enables or disables Link Integrity. When
Link Integrity is enabled, the wireless segment associated with the
AP will be disconnected whenever the connection between the AP
and the LAN is broken.
D-Link Systems, Inc.
61
DWL-2700AP User’s Manual
Using the AP Manager
Device Configuration > Wireless
SSID: The Service Set (network) Identifier of your wireless network.
Channel: Allows you to select a channel. 6 is the default setting.
Data Rate: A pull-down menu to select the maximum wireless signal rate for
the selected devices(s).
Tx Power: A pull-down menu for selecting the transmit power of the selected
device(s).
Beacon Interval Beacons are packets sent by an access point to synchronize a
(20~1000): network. Specify the beacon value for the selected device(s) here.
The default value of 100 is recommended.
Radio Wave: Allows you to enable or disable the wireless (802.11b/g) signal from
being transmitted.
D-Link Systems, Inc.
62
DWL-2700AP User’s Manual
Using the AP Manager
Device Configuration > Wireless (continued)
Antenna Diversity: Select Diversity to allow the DWL-2700AP AP to automatically
switch to the antenna with the better RSSI value. Selecting Left
Antenna will not allow the DWL-2700AP to switch antenna and
the radio will use the left antenna (facing the AP) to transmit and
receive packets. Selecting Right Antenna will not allow the
DWL-2700AP to switch antenna and the radio will only use the
right antenna (facing the AP) to transmit and receive packets.
DTIM (1~255): DTIM (Delivery Traffic Indication Message) is a countdown informing
clients of the next listening window for broadcast and multicast
messages.
Fragment
Length This sets the fragmentation threshold (specified in bytes). Packets
(256~2346): exceeding the value set here will be fragmented. The default is 2346.
RTS Length The RTS value should not be changed unless you encounter
(256~2346): inconsistent data flow. The default value is 2346.
Autochannel Enable this option to allow the access point to automatically scan
Scan: for an available channel.
SSID Broadcast: Allows you to enable or disable the broadcasting of the SSID to
network clients.
Short Preamble: If you are transferring large amounts of data on your wireless
network, enable this option.
SSID Broadcast: Allows you to enable or disable the broadcasting of the SSID to
network clients.
WMM: Select Enable or Disable to enable or disable WMM mode.
Wireless B/G Mode: Select the wireless mode from B only, G only or Both.
D-Link Systems, Inc.
63
DWL-2700AP User’s Manual
Using the AP Manager
Device Configuration > Wireless > Authentication
Modes
AP Mode
Authentication Available
Access Point
Open System
Shared Key
Open System/Shared Key
802.1x
WPA-Enterprise
WPA-Personal
WPA2-Enterprise
WPA2-Personal
WPA-Auto-Enterprise
WPA-Auto-Personal
WDS with AP
Open System
Shared Key
Open System/Shared Key
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
WDS
Open System
Shared Key
Open System/Shared Key
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
D-Link Systems, Inc.
64
DWL-2700AP User’s Manual
Using the AP Manager
Device Configuration > Security
The Security tab contains the WEP configuration settings on the initial page. If you select
WPA as the authentication type, an additional tab will appear with the WPA configuration
options based on your selection.
Authentication Select from the pull-down menu the type of authentication to be used
Type: on the selected device(s).
Open: The key is communicated across the network.
Shared: Limited to communication with devices that share the same
WEP settings.
Open System/
Shared Key: The key is communicated and identical WEP settings are required.
WPA-Enterprise
WPA2-Enterprise
WPA-Auto- Used to authenticate clients via a RADIUS server.
Enterprise:
WPA-Personal
WPA2-Personal Does not utilize a RADIUS server for authentication but uses a
WPA-Auto passphrase that is configured on the clients and access points.
Personal:
D-Link Systems, Inc.
65
DWL-2700AP User’s Manual
Device Configuration > Security (continued)
RADIUS: Built-in RADIUS server does not require outside server.
Local User: A type of 802.1x security that utilizes user login for security.
WEP Key Type: Select a key type, Static or Dynamic, when 802.1x encryption
is selected.
Encryption: Enable or disable encryption on the selected device(s).
Active Key Index: Select which defined key is active on the selected device(s).
Key Values: Select the key size (64-bit, 128-bit, or 152-bit) and key type (HEX or
ASCII) and then enter a string to use as the key. The key length is
automatically adjusted based on the settings you choose.
D-Link Systems, Inc.
66
DWL-2700AP User’s Manual
Using the AP Manager
Device Configuration > Security > WEP
Authentication Select from the pull-down menu the type of authentication to be used
Type: on the selected device(s).
Open: The key is communicated across the network.
Shared: Limited to communication with devices that share the same
WEP settings.
Open System/
Shared Key: The key is communicated and identical WEP settings are required.
Active Key Index: Select which defined key is active on the selected device(s).
Key Values: Select the key size (64-bit, 128-bit, or 152-bit) and key type (HEX or
ASCII) and then enter a string to use as the key. The key length is
automatically adjusted based on the settings you choose.
D-Link Systems, Inc.
67
DWL-2700AP User’s Manual
Using the AP Manager
Device Configuration > Security > 802.1x
Cipher Type: WEP is used here.
D-Link Systems, Inc.
68
DWL-2700AP User’s Manual
Using the AP Manager
Device Configuration > Security > 802.1x (RADIUS)
RADIUS Server: Enter the IP address of the RADIUS server.
RADIUS Port: Enter the port used on the RADIUS server (1812 is default).
RADIUS Secret: Enter the RADIUS secret.
D-Link Systems, Inc.
69
DWL-2700AP User’s Manual
Using the AP Manager
Device Configuration > Security > WPA-Enterprise
WPA2-Enterprise/ WPA-Auto-Enterprise (Cipher)
Cipher Type: Select Auto, TKIP, or AES from the pull-down
menu.
Group Key Update Select the interval during which the group key will be valid. 1800 is the
Interval: recommended setting. A lower interval may reduce transfer rates.
D-Link Systems, Inc.
70
DWL-2700AP User’s Manual
Using the AP Manager
Device Configuration > Security > WPA-Enterprise /
WPA2-Enterprise/ WPA2-Auto-Enterprise (Server)
RADIUS Server: Enter the IP address of the RADIUS server.
RADIUS Port: Enter the port used on the RADIUS server (1812 is default).
RADIUS Secret: Enter the RADIUS secret.
D-Link Systems, Inc.
71
DWL-2700AP User’s Manual
Using the AP Manager
Device Configuration > Security > WPA-Personal
WPA2-Personal / WPA-Auto-Personal (Cipher)
Cipher Type: Select Auto, TKIP, or AES from the pull-down menu.
Group Key Update Select the interval during which the group key will be valid. 1800 is the
Interval: recommended setting. A lower interval may reduce transfer rates.
PassPhrase: Enter a PassPhrase between 8-63 characters in length.
D-Link Systems, Inc.
72
DWL-2700AP User’s Manual
Using the AP Manager
Device Configuration > Filters > WLAN Partition >
Access Control
The following features are configurable in IEEE 802.11g:
Internal Station Enabling this allows wireless clients to communicate with each other.
Connection: When this option is disabled, wireless stations are not allowed to
exchange data through the access point.
Broadcast from Enabling this option allows Ethernet devices to communicate with
Ethernet to WLAN: wireless clients. When this option is disabled, all data from Ethernet
to wireless clients is blocked. Wireless devices can still send data to
the Ethernet devices when this is disabled.
Access Control: When disabled access control is not filtered based on the MAC
address. If Accept or Reject is selected, then a box appears for
entering MAC addresses. When Accept is selected, only devices
with a MAC address in the list are granted access. When Reject
is selected, devices in the list of MAC addresses are not granted
access.
Access
Add or Delete MAC addresses in the Access Control List.
Control List:
D-Link Systems, Inc.
73
DWL-2700AP User’s Manual
Device Configuration > Filters > Ethernet/Wireless IP
Filters
Ethernet Filters:
Access Control: When disabled access control is not filtered based on the MAC
address. If Accept or Reject is selected, then a box appears for
entering MAC addresses. When Accept is selected, only devices
with a MAC address in the list are granted access. When Reject
is selected, devices in the list of MAC addresses are not granted
access.
Access
Control List: Add or Delete MAC addresses in the Access Control List.
IP Filters:
Access Control: When disabled access control is not filtered based on the IP address.
If Accept or Reject is selected, then a box appears for entering IP
addresses. When Accept is selected, only devices with an IP address
in the list are granted access. When Reject is selected, devices in
the list of IP addresses are not granted access.
Access
Add or Delete IP addresses in the Access Control List.
Control List:
D-Link Systems, Inc.
74
Using the AP Manager
DWL-2700AP User’s Manual
Device Configuration > AP Mode
Access Point: There are 3 AP modes that are configurable in IEEE 802.11g:
• Access Point
• WDS with AP
• WDS
Access Point, the default setting used to create a wireless LAN, is
displayed here.
Please see the following pages for an explanation of the other 2 AP
modes.
D-Link Systems, Inc.
75
DWL-2700AP User’s Manual
Using the AP Manager
Device Configuration > AP Mode > WDS with AP
WDS with AP: Allows you to connect multiple wireless LANs together while acting
as an access point at the same time. This only works with other
DWL-2700APs. If enabled, you must enter the MAC address of the
other DWL-2700AP(s) on your network.
Site Survey: Click Site Survey to view available APs in your network.
D-Link Systems, Inc.
76
DWL-2700AP User’s Manual
Using the AP Manager
Device Configuration > AP Mode > WDS
WDS: Allows you to connect multiple wireless LANs together. All other
LANs must be using DWL-2700APs. When enabled, you must enter
the MAC address of the other DWL-2700AP(s) on your network (you
can enter up to eight addresses).
Site Survey: Click Site Survey to view available APs in your network.
D-Link Systems, Inc.
77
DWL-2700AP User’s Manual
Using the AP Manager
Device Configuration > Indication
Temperature: Displays the current operating temperature of the DWL-2700AP.
Auto Refresh: Check this box to automatically refresh the Indication information.
D-Link Systems, Inc.
78
DWL-2700AP User’s Manual
Device Configuration > Log
Remote Syslog Check this box to enable syslog logging.
Status:
Activity: Enable or Disable the three types of logging activity, System
Activity, Wireless Activity, and Notice messages.
Remote Syslog Enter the IP address of the syslog server.
Status Server IP:
SMTP Setting: Check this box to enable SMTP.
SMTP Server / Enter the IP address of the SMTP server.
IP Address:
SMTP Sender: Enter the SMTP Sender.
SMTP Recipient: Enter the SMTP Recipient.
D-Link Systems, Inc.
79
Using the AP Manager
DWL-2700AP User’s Manual
Device Configuration > Client-Info
Client Select this option to obtain information on IEEE 802.11g clients.
Information: A client is a device on the network that is communicating with the
DWL-2700AP.
The following information is available for each client that is communicating with the
DWL-2700AP.
MAC:
Displays the MAC address of the client.
Band:
Displays the wireless band.
Authentication:
RSSI:
Power Saving
Mode:
D-Link Systems, Inc.
Displays the type of authentication that is enabled.
Receive Signal Strength Indicator indicates the strength of the
signal.
Displays the status of the power saving feature.
80

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Modify Date                     : 2006:08:14 09:09:32-07:00
Create Date                     : 2006:08:14 09:06:08-07:00
Metadata Date                   : 2006:08:14 09:09:32-07:00
Creator Tool                    : Adobe InDesign CS2 (4.0.2)
Format                          : application/pdf
Document ID                     : uuid:09132ef2-c421-4334-905b-adad78983003
Instance ID                     : uuid:b6ba1c87-9f3f-4761-9cb8-6fea15d7f275
Producer                        : Adobe PDF Library 7.0
Has XFA                         : No
Page Count                      : 80
Creator                         : Adobe InDesign CS2 (4.0.2)

EXIF Metadata provided by EXIF.tools