D Link DWL3200APA1 IEEE 802.11g Wireless Access Point User Manual Antenna warning 20050128

D Link Corporation IEEE 802.11g Wireless Access Point Antenna warning 20050128

Antenna installlation guide part 1

CAUTION!!Please always put the surge protectorindoors and near the deviceside, if you cannot keep it indoors,use the tapes to wrap all the connectorsas pictures showed below.Option: Ultra low-loss cable LMR400Length options: 3M/6M/9MOption: Surge protectorConnectors: N-plug to N-jack
ANT24-SP Surge protectorInstallation guidefor outdoor antenna-kitStep 1loosen the screw from the surge protector.Step 2get a normal conductive copper wire with 2 sides stripped long enough to be conductive,these wires can lead high voltage surges into the grounding.Remark:(1) for the ground screw you use, we suggest the longer (deeper into ground) the better performance it has.(2) please use a copper wire with diameter at least from 2.0mm, the thicker the diameter, the highervoltage it can sustain.Option (1) Option (2)GroundStep 3find a conductive material nearby the antenna installation sites, connect another end of the wireinto position, there are several options:(1) Use a long screw to stick into the ground tightly, connect another wire onto.(2) fix or solder another end of wire onto a steel material/ bar under steel construction,such as wall for buildings, railings or other conductive materials which set up fromthe ground.
Silver to AntennaGolden to DeviceTo have correct connection of the attachedextension cable (Based on connector color management)
Silver to AntennaGolden to DeviceTo have correct connection of the attachedextension cable (Based on connector color management)

Navigation menu