D Link DWL3200APA1 IEEE 802.11g Wireless Access Point User Manual
D Link Corporation IEEE 802.11g Wireless Access Point
D Link >
Contents
User manual part 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 511538 |
| Application ID | TmMCgnQKaH2OEcQT0VVFQg== |
| Document Description | User manual part 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 131.23kB (1640371 bits) |
| Date Submitted | 2005-02-02 00:00:00 |
| Date Available | 2005-02-02 00:00:00 |
| Creation Date | 2004-12-28 17:35:59 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2005-01-25 16:44:05 |
| Document Title | template |
| Document Creator | Adobe PageMaker 7.0 |
| Document Author: | dpham |
DWL-3200AP manual new cover pending DWL-3200AP User’s Manual Table of Contents Table of Contents Table of Contents ............................................................................2 Package Contents ............................................................................3 Introduction ....................................................................................4 Features and Benefits ......................................................................6 Wireless Basics ................................................................................ 7 Three Operational Modes ............................................................. 10 Getting Started ............................................................................. 11 Using the Configuration Menu .................................................... 13 Using the AP Manager ................................................................. 41 Networking Basics ........................................................................ 67 Troubleshooting ........................................................................... 83 Technical Specifications ............................................................... 89 Contacting Technical Support ...................................................... 92 Warranty ..................................................................................... 93 Registration .................................................................................. 97 D-Link Systems, Inc. DWL-3200AP User’s Manual Package Contents Package Contents D-Link AirPremierTM DWL-3200AP Wireless Access Point with PoE Power over Ethernet base unit Power Adapter-DC 48V, 0.4A Power Cord Manual and Warranty on CD Quick Installation Guide Ethernet Cable Note: Using a power supply with a different voltage than the one included with the DWL-3200AP will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. Minimum System Requirements Computers with Windows, Macintosh, or Linux-based operating systems with an installed Ethernet Adapter Internet Explorer version 6.0 or Netscape Navigator version 7.0 and above D-Link Systems, Inc. DWL-3200AP User’s Manual Introduction Introduction At up to fifteen times the speed of previous wireless devices (maximum wireless signal rate of up to 108Mbps* in Super G mode), you can work faster and more efficiently, increasing productivity. With the DWL-3200AP, bandwidth-intensive applications like graphics or multimedia will benefit significantly because large files are able to move across the network quickly. The DWL-3200AP is capable of operating in one of 3 different modes to meet your wireless networking needs. The DWL-3200AP can operate as an access point, or in access point-to-access point bridging mode, or in access point-to-multipoint bridging mode. Use less wiring, enjoy increased flexibility, save time and money with PoE (Power over Ethernet). With PoE, the DWL-3200AP shares power and data over the CAT5 cable, making the setup of your network less expensive and more convenient. An ideal solution for quickly creating and extending a wireless local area network (WLAN) in offices or other workplaces, trade shows and special events, the DWL-3200AP provides data transfers at up to 108Mbps in Super G mode when used with other D-Link AirPremier products. (The 802.11g standard is backwards compatible with 802.11b devices.) WPA is offered in two flavors: WPA-Personal is directed at home users who do not have the server based equipment required for user authentication. The method of authentication is similar to WEP because you define a “Pre-Shared Key” on the wireless router/AP. Once the pre-shared key is confirmed and satisfied on both the client and access point, then access is granted. the encryption method used is referred to as the Temporal Key Integrity Protocol (TKIP), which offers per-packet dynamic hashing. It also includes an integrity checking feature which ensures that the packets were not tampered with during wireless transmission. *Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. D-Link Systems, Inc. DWL-3200AP User’s Manual Introduction WPA-Enterprise is ideal for businesses that have existing security infrastructures in place. Management and security implementation can now be centralized on a server participating on the network. Utilizing 802.1x witha RADIUS (Remote Authentication Dial-in User Service) server, a network adminstrator can define a list of authorized users who can access the wireless LAN. When attempting to access a wireless LAN with WPA-Enterprise configured, the new client will be challenged with a username and password. If the new client is authorized by the administration, and enters the correct username and password, then access is granted. In a scenario where an employee leaves the company, the network administrator can remove the employee from the authorized list and not have to worry about the network being compromised by a former employee. 802.1x: Authentication which is a first line of defense against intrusion. In the authentication process, the Authentication Server verifies the identity of the client attempting to connect to the network. Unfamiliar clients would be denied access. D-Link Systems, Inc. DWL-3200AP User’s Manual Features and Benefits Features and Benefits 3 Different Operation modes - Capable of operating in one of three different operation modes to meet your wireless networking requirements: Access Point; AP-to-AP Bridging; or AP-to-Multipoint Bridging. Easy Installation with PoE (Power over Ethernet). Faster wireless networking with the 802.11g standard to provide a maximum wireless signal rate of up to 54Mbps* (maximum wireless signal rate of up to 108Mbps* in Super G mode). Compatible with the 802.11b standard to provide a wireless data rate of up to 11Mbps - that means you can migrate your system to the 802.11g standard on your own schedule without sacrificing connectivity. Better security with WPA - The DWL-3200AP can securely connect wireless clients on the network using WPA (Wi-Fi Protected Access) providing a much higher level of security for your data and communications than has previously been available. AP Manager Setup Wizard - The new Setup Wizard makes network configuration quick and simple. SNMP for Management - The DWL-3200AP is not just fast but it also supports SNMP v.3 for a better network management. Superior wireless AP manager software is bundled with the DWL-3200AP for network configuration and firmware upgrade. Systems administrators can also setup the DWL-3200AP easily with the Web-based configuration. A D-Link D-View module will be downloadable for network administration and real-time network traffic monitoring with D-Link D-View software. Utilizes OFDM technology (Orthogonal Frequency Division Multiplexing). Operates in the 2.4GHz frequency range. Web-based interface for managing and configuring. *Maximum wireless signal rate based on IEEE Standard 802.11a/g specifications. Actual data throughput will vary. D-Link Systems, Inc. DWL-3200AP User’s Manual Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you access to the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking brings. A Wireless Local Area Network (WLAN) is a computer network that transmits and receives data with radio signals instead of wires. WLANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. People use WLAN technology for many different purposes: Mobility - Productivity increases when people have access to data in any location within the operating range of the WLAN. Management decisions based on real-time information can significantly improve worker efficiency. Low Implementation Costs - WLANs are easy to set up, manage, change and relocate. Networks that frequently change can benefit from WLANs ease of implementation. WLANs can operate in locations where installation of wiring may be impractical. Installation and Network Expansion - Installing a WLAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings. Wireless technology allows the network to go where wires cannot go - even outside the home or office. Inexpensive Solution - Wireless network devices are as competitively priced as conventional Ethernet network devices. The DWL-3200AP saves money by providing multi-functionality, configurable in one of four different modes. Scalability - WLANs can be configured in a variety of ways to meet the needs of specific applications and installations. Configurations are easily changed and range from Peerto-Peer networks suitable for a small number of users to larger Infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed. D-Link Systems, Inc. DWL-3200AP User’s Manual Wireless Basics Standards-Based Technology The DWL-3200AP Wireless Access Point utilizes the 802.11b and the 802.11g standards. The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the maximum wireless signal rate of up to 54Mbps* (maximum wireless signal rate of up to 108Mbps* in Super G mode) within the 2.4GHz band, utilizing OFDM technology. This means that in most environments, within the specified range of this device, you will be able to transfer large files quickly or even watch a movie in MPEG format over your network without noticeable delays. This technology works by transmitting highspeed digital data over a radio wave utilizing OFDM (Orthogonal Frequency Division Multiplexing) technology. OFDM works by splitting the radio signal into multiple smaller sub-signals that are then transmitted simultaneously at different frequencies to the receiver. OFDM reduces the amount of crosstalk (interference) in signal transmissions. The D-Link DWL-3200AP will automatically sense the best possible connection speed to ensure the greatest speed and range possible. 802.11g offers WPA, the most advanced network security features available today. *Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. D-Link Systems, Inc. DWL-3200AP User’s Manual Wireless Basics Installation Considerations The D-Link AirPremier DWL-3200AP lets you access your network, using a wireless connection, from virtually anywhere within its operating range. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines: 1 Keep the number of walls and ceilings between the DWL-3200AP and other network devices to a minimum - each wall or ceiling can reduce your DWL-3200AP’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2 Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3 Building materials can impede the wireless signal - a solid metal door or aluminum studs may have a negative effect on range. Try to position wireless devices and computers with wireless adapters so that the signal passes through drywall or open doorways and not other materials. 4 Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. D-Link Systems, Inc. DWL-3200AP User’s Manual Three Operational Modes D-Link Systems, Inc. 10 DWL-3200AP User’s Manual Getting Started You will need broadband Internet access. Consult with your Cable or DSL provider for proper installation of the modem. Connect the Cable or DSL modem to a Router. (See the printed Quick Installation Guide included with your router.) Connect the Ethernet Broadband Router to the PoE base unit. (See the printed Quick Installation Guide included with the DWL-3200AP.) Connect the DWL-3200AP to the PoE base unit. (See the printed Quick Installation Guide included with the DWL-3200AP.) If you are connecting a desktop computer to your network, install the D-Link DWL-G520 wireless PCI adapter into an available PCI slot on your desktop computer. (See the printed Quick Installation Guide included with the network adapter.) Install the drivers for the D-Link DWL-G650 wireless Cardbus adapter into a laptop computer. (See the printed Quick Installation Guide included with the DWL-G650.) D-Link Systems, Inc. 11 DWL-3200AP User’s Manual Getting Started Connecting PoE (Power over Ethernet) Step 1 Connect one end of an Ethernet cable (included with your package) to the LAN port on the DWL-3200AP and the other end of the Ethernet cable to the port labeled P+DATA OUT on the PoE base unit. Step 2 Connect another Ethernet cable from the DATA IN port on the PoE base unit to your router/switch or to a PC. Step 3 Attach the power adapter to the connector labeled POWER IN on the PoE base unit. Attach the power cord to the power adapter and into an electrical outlet. D-Link Systems, Inc. 12 DWL-3200AP User’s Manual Using the Configuration Menu Using the Configuration Menu To configure the DWL-3200AP, use a computer which is connected to the DWL-3200AP with an Ethernet cable (see the Network Layout diagram). First, disable the Access the Internet using a proxy server function. To disable this function, go to Control Panel > Internet Options > Connections > LAN Settings and uncheck the enable box. Start your web browser program (Internet Explorer, Netscape Navigator) . Type the IP address and http port of the DWL-3200AP in the address field (http://192.168.0.50) and press Enter. Make sure that the IP addresses of the DWL-3200AP and your computer are in the same subnet. http://192.168.0.50 After the connection is established, you will see the user identification window as shown. Note: If you have changed the default IP address assigned to the DWL-3200AP, make sure to enter the correct IP address. Type admin in the User Name field Leave the Password field blank Click OK Note: If you have changed the password, make sure to enter the correct password. D-Link Systems, Inc. 13 DWL-3200AP User’s Manual Using the Configuration Menu Home > Wizard The Home>Wizard screen will appear. Please refer to the Quick Installation Guide for more information regarding the Setup Wizard. These buttons appear on most of the configuration screens in this section. Please click on the appropriate button at the bottom of each screen after you have made a configuration change. D-Link Systems, Inc. 14 DWL-3200AP User’s Manual Using the Configuration Menu Home > Wireless Wireless Band: IEEE 802.11g SSID: Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID’s factory default setting is default. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. SSID Broadcast: Enable or Disable SSID broadcast. Enabling this feature broadcasts the SSID across the network. C h a n n e l : 6 is the default channel. All devices on the network must share the same channel. (Note: The wireless adapters will automatically scan and match the wireless setting.) Radio Frequency: The radio frequency will vary depending on the wireless channel that is chosen. The frequency in channel 6 is 2.437GHz. D-Link Systems, Inc. 15 DWL-3200AP User’s Manual Using the Configuration Menu Home > LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DWL-3200AP. These settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. Get IP From: Static (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish to assign a static IP address to the DWL-3200AP. When DHCP is selected the other fields here will be greyed out. IP Address: The default IP address is 192.168.0.50. Assign a static IP address that is within the IP address range of your network. Subnet Mask: Enter the subnet mask. All devices in the network must share the same subnet mask. Default Gateway: Enter the IP address of the gateway in your network. If there isn’t a gateway in your network, please enter an IP address within the range of your network. D-Link Systems, Inc. 16 Using the Configuration Menu DWL-3200AP User’s Manual Advanced > Mode Wireless Band: IEEE 802.11g The DWL-3200AP can be configured to perform in any of three modes: access point, point-to-point bridge, and point-to-multi-point bridge. Access Point: Access Point is the default setting. This mode is used to create a wireless LAN. PtP Bridge: PtP Bridge will allow you to connect two LANs together. The wireless bridge mode will work only with another DWL-3200AP. Click to enable and enter the MAC address of the remote bridge. PtMP Bridge: PtMP Bridge will allow you to connect multiple wireless LANs together. Other wireless LANs must be using DWL-3200APs. Click to enable and enter up to 8 remote AP MAC addresses. D-Link Systems, Inc. 17 DWL-3200AP User’s Manual Using the Configuration Menu Advanced > Performance Wireless Band: IEEE 802.11g Frequency: The frequency is 2.437GHz for channel 6. Channel: The default channel is 6. Data Rate:* The Data Rates are Auto, 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 9Mbps, 11Mbps, 12Mbps, 18Mbps, 24Mbps, 36Mbps, 48Mbps, 54Mbps. Beacon Interval: Beacons are packets sent by an access point to synchronize a network. Specify a beacon interval value. The default (100) is recommended. *Maximum wireless signal rate derived from IEEE Standard 802.11g and IEEE Standard 802.11b specifications. Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. D-Link Systems, Inc. 18 Using the Configuration Menu DWL-3200AP User’s Manual DTIM: (Delivery Traffic Indication Message) - Select a setting between 1and 255. 1 is the default setting. DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. Fragment Length: The fragmentation threshold, which is specified in bytes, determines whether packets will be fragmented. Packets exceeding the 2346 byte setting will be fragmented before transmission. 2346 is the default setting RTS Length: This value should remain at its default setting of 2346. If you encounter inconsistent data flow, only minor modifications to the value range between 256 and 2346 are recommended Transmit Power: Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum power. Super G Mode: Super G is a group of performance enhancement features that increase end user application throughput in an 802.11g network. Super G is backwards compatible to standard 802.11g devices. For top performance, all wirelss devices on the network should be Super G capable. Select either Disabled, Super G without Turbo, Super G with Dynamic Turbo, or Super G with Static Turbo. Disabled: Standard 802.11g support, no enhanced capabilities. Super G without Capable of Packet Bursting, FastFrames, Compression, Turbo: and no Turbo mode. Super G with Dynamic Turbo: Capable of Packet Bursting, FastFrames, Compression, and Dynamic Turbo. This setting is backwards compatible with non-Turbo (legacy) devices. Dynamic Turbo mode is only enabled when all devices on the wireless network are configured with Super G with Dynamic Turbo enabled. Super G with Static Turbo: Capable of Packet Bursting, FastFrames, Compression, and Static Turbo. This setting is not backwards compatible with non-Turbo (legacy) devices. Static turbo mode is always on and is only enabled when all the devices on the wireless network are configured with Super G with Static Turbo enabled. 802.11g only: For increased speed in your network, enable this option. 802.11b devices will be excluded. Radio Wave: Select ON or OFF. Auto Channel Select Enable or Disable. (Enable this feature to auto-select the Scan: channel for best wireless performance.) D-Link Systems, Inc. 19 DWL-3200AP User’s Manual Using the Configuration Menu Advanced > Filters > Wireless Access Settings Wireless Band: IEEE 802.11g Access Control: Select Disabled to disable the filters function. Select Accept to accept only those devices with MAC addresses in the Access Control List. Select Reject to reject the devices with MAC addresses in the Access Control List. MAC Address: Enter the MAC addresses that you wish to include in your filters list, and click Save. MAC Address List: When you enter a MAC address, it appears in this list. Highlight a MAC address and click Delete to remove it from the list. D-Link Systems, Inc. 20 DWL-3200AP User’s Manual Using the Configuration Menu Advanced > Filters > WLAN Partition Wireless Band: IEEE 802.11g Internal Station Enabling this feature allows wireless clients to communicate with Connection: each other. If this is disabled, wireless stations of the selected band are not allowed to exchange data through the access point. Ethernet to WLAN Enabling this feature allows Ethernet devices to communicate with Access: wireless clients. If this is disabled, all data from the Ethernet to associated wireless devices is blocked. Wireless devices can still send data to the Ethernet. D-Link Systems, Inc. 21 DWL-3200AP User’s Manual Using the Configuration Menu Advanced > Encryption > Open System and/or Shared Key When you select Open System, Shared Key or Open System/Shared Key,enter values for the fields that are shown here highlighted in blue. Wireless Band: IEEE 802.11g. Authentication: Select Open System to communicate the key across the network. Select Shared Key to limit communication to only those devices that share the same WEP settings. Select Open System/Shared Key to communicate the key and require identical WEP settings to communicate. Encryption: Select Disabled or Enabled. D-Link Systems, Inc. 22 DWL-3200AP User’s Manual Using the Configuration Menu Advanced > Encryption > Open System and/or Shared Key (continued) Key Type:* Select HEX or ASCII. Key Size: Select 64-, 128-, 152-bits. Valid Key: Select the 1st through the 4th key to be the active key. First through Input up to four keys for encryption. You will select one of these Fourth keys: keys in the valid key field. *Hexadecimal digits consist of the numbers 0-9 and the letters A-F ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers from 0-127 D-Link Systems, Inc. 23 DWL-3200AP User’s Manual Using the Configuration Menu Advanced > Encryption > WPA-EAP When you select WPA-EAP, you will configure the following properties. Cipher Type: When you select WPA-EAP, you must select AES, AUTO or TKIP from the pull down menu. Group Key Update Select the interval during which the group key will be valid. Interval: 1800 is the recommended value. A lower interval may reduce data transfer rate. Radius Server: Enter the IP address of the Radius server. Radius Port: Enter the Radius port. Radius Secret: Enter the the Radius secret. Encryption: Select Enabled. D-Link Systems, Inc. 24 DWL-3200AP User’s Manual Using the Configuration Menu Advanced > Encryption > WPA-PSK PassPhrase: When you select WPA-PSK, please enter a PassPhrase in the corresponding field. Cipher Type: When you select WPA-PSK, please select AES, AUTO or TKIP from the pull down menu. Group Key Update Select the interval during which the group key wll be valid. The default Interval: value of 1800 is recommended. Encryption: Select Enabled. D-Link Systems, Inc. 25 DWL-3200AP User’s Manual Using the Configuration Menu Advanced > DHCP Server > Dynamic Pool Settings DHCP Server Dynamic Host Configuration Protocol assigns dynamic IP Control: addresses to devices on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign new IP addresses. Select Enable to allow the DWL-3200AP to function as a DHCP server. IP Assigned From: Input the first IP address available for assignment in your network. The Range of Pool Enter the number of IP addresses available for assignment. (1-255): D-Link Systems, Inc. 26 DWL-3200AP User’s Manual Using the Configuration Menu Advanced > DHCP Server > Dynamic Pool Settings (continued) SubMask: All devices in the network must have the same subnet mask to communicate. Enter the submask for the network here. Gateway: Enter the IP address of the gateway on the network. Wins: Windows Internet Naming Service is a system that determines the IP address of a network computer that has a dynamically assigned IP address. DNS: Enter the IP address of the DNS server. The DNS (Domain Name Server) translates domain names such as www.dlink.com into IP addresses. Domain Name: Enter the domain name of the DWL-3200AP, if applicable. (An example of a domain name is: www.dlink.com.) Lease Time The Lease Time is the period of time before the DHCP server will (60-31536000 assign new IP addresses. sec.): Status: Turn the Dynamic Pool Settings ON or OFF here. D-Link Systems, Inc. 27 DWL-3200AP User’s Manual Using the Configuration Menu Advanced > DHCP Server > Static Pool Settings DHCP Server Dynamic Host Configuration Protocol assigns IP addresses to Control: wireless devices on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign IP addresses. Select Enable to allow the DWL-3200AP to function as a DHCP server. Assigned IP: Use the Static Pool Settings to assign the same IP address to a device at every restart. The IP addresses assigned in the Static Pool list must NOT be in the same IP range as the Dynamic Pool. After you have assigned a static IP address to a device via its MAC address, click Apply; the device will appear in the Assigned Static Pool at the bottom of the screen. Edit or delete the device in this list. Assigned MAC Enter the MAC address of the device here. Address: SubMask: Enter the subnet mask here. Gateway: Enter the IP address of the gateway on the network. D-Link Systems, Inc. 28 DWL-3200AP User’s Manual Using the Configuration Menu Wins: Windows Internet Naming Service is a system that determines the IP address of a network computer with a dynamically assigned IP address, if applicable. DNS: Enter the IP address of the Domain Name Server, if applicable. The DNS translates domain names such as www.dlink.com into IP addresses. Domain Name: Enter the domain name of the DWL-3200AP, if applicable. Status: This option turns the Static Pool settings ON or OFF. Advanced > DHCP Server > Current IP Mapping List This screen displays information about the current DHCP dynamic and static IP address pools. This information is available when you enable the DHCP function of the DWL-3200AP and assign dynamic and static IP address pools. Current DHCP These are IP address pools to which the DHCP server function has Dynamic Pools: assigned dynamic IP addresses. D-Link Systems, Inc. 29 DWL-3200AP User’s Manual Using the Configuration Menu Advanced > DHCP Server > Current IP Mapping List (continued) Binding MAC The MAC address of a device on the network that is within the DHCP address: dynamic IP address pool. Assigned IP address: The current corresponding DHCP-assigned dynamic IP address of the device. Lease Time: The length of time that the dynamic IP address will be valid. Current DHCP Static These are IP address pools to which the DHCP server function has Pools: assigned static IP addresses. Binding MAC The MAC address of a device on the network that is within the DHCP address: static IP address pool. Assigned IP address: The current corresponding DHCP-assigned static IP address of the device. D-Link Systems, Inc. 30 DWL-3200AP User’s Manual Using the Configuration Menu Tools > Admin User Name: Enter a user name. The default setting is admin. Old Password: To change your password, enter the old password here. New Password: Enter your new password here. Confirm New Password: Enter your new password again. D-Link Systems, Inc. 31 DWL-3200AP User’s Manual Tools > System Apply Settings and Click Restart to apply the system settings and restart the Restart: DWL-3200AP. Restore to Factory Default Settings: Click Restore to return the DWL-3200AP to its factory default settings. D-Link Systems, Inc. 32 DWL-3200AP User’s Manual Using the Configuration Menu Tools > Firmware Update File: After you have downloaded the most recent version of the firmware from http://support.dlink.com to your hard drive, you can Browse your hard drive to locate the downloaded file. Select the file and click OK to update the firmware. D-Link Systems, Inc. 33 DWL-3200AP User’s Manual Using the Configuration Menu Tools > Cfg File Update File: Browse for the configuration settings that you have saved to your hard drive. Click OK after you have selected the settings file. Load Settings to the Loacl Hard Drive: Click OK to save the selected settings to your hard drive. D-Link Systems, Inc. 34 DWL-3200AP User’s Manual Using the Configuration Menu Tools > Cfg File > Choose file When you click Browse in the previous screen, the dialog box shown above appears. Select the file you wish to download and click Open. The dialog box above will appear as the device restarts. Please wait for a few seconds. D-Link Systems, Inc. 35 Using the Configuration Menu DWL-3200AP User’s Manual Tools > Misc > Telnet Settings Telnet is a program that allows you to control your network from a single PC. Status: Timeout: D-Link Systems, Inc. Telnet is enabled by default. Select a time period after which a session timeout will occur. 36
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Modify Date : 2005:01:25 16:44:05+08:00 Create Date : 2004:12:28 17:35:59-08:00 Subject : template Page Count : 36 Page Mode : UseOutlines About : uuid:c6437007-9c88-44fd-bb6a-326eeefae3a4 Producer : Acrobat Distiller 5.0.5 (Windows) Keywords : Creation Date : 2004:12:28 17:35:59-08:00 Mod Date : 2005:01:25 16:44:05+08:00 Author : dpham Metadata Date : 2005:01:25 16:44:05+08:00 Creator Tool : Adobe PageMaker 7.0 Document ID : uuid:190644a0-a46f-4253-b298-7da87a4d4336 Format : application/pdf Creator : dpham Title : template Description : template Has XFA : NoEXIF Metadata provided by EXIF.tools