D Link DWLG122B1 802.11g/2.4GHz Wireless USB Adapter User Manual C s and Settings 05723

Download:
Mirror Download [FCC.gov]
Document ID	455893
Application ID	RRc9hyPcDdvqrLecsMvjbw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	79.39kB (992397 bits)
Date Submitted	2004-08-03 00:00:00
Date Available	2004-08-03 00:00:00
Creation Date	2004-06-25 09:49:08
Producing Software	Acrobat PDFWriter 5.0Windows NT ª©
Document Lastmod	2004-07-30 11:12:05
Document Title	C:\Documents and Settings\05723
Document Creator	Adobe PageMaker 6.5C - [C:\Documents and Settings\05723\桌面\DWL-G122_B1-English.p65]
Document Author:	05723

DWL-G122
This product works with the following operating
system software: Windows XP, Windows
AirPlus GTM
High Speed 802.11g
USB Wireless Adapter
2000, Windows Me, Windows 98SE
Before You Begin
You must have at least the following:
• You will need a computer with an available USB port to connect the
•
•
•
DWL-G122 Wireless USB adapter.
At least a 500 MHz processor and 62 MB of memory
An 802.11b or 802.11g Access Point (for Infrastructure Mode) or another 802.
11b or 802.11g wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode.)
Properly installed and working USB Controller.
Check Your Package Contents
These are the items included with your DWL-G122 purchase:
DWL-G122 Wireless USB Adapter
CD-ROM (containing Drivers, Manual and Warranty)
Cradle
If any of the above items are missing, please contact your reseller.
@2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice.
DWL-G122 Overview
Link/Power LED
Link - Indicates that the DWL-G122
is properly installed in the computer.
Power - blinks when data is being
transmitted through the wireless
connection.
USB Connector
Connects to Yours
desktop or laptop
computerl.
Antenna
Used to wirelessly
connect to 802.11b
or 802.11g
networks.
Insert the D-Link CD-ROM Into Your
Computer
Turn on the computer and
Insert the D- Link AirPuls GTM DWLG122 Driver CD in the CD-ROM drive.
The step-by-step instructions that follow are
shown in Windows XP. The steps and screens
are similar for the other Windows operating
systems
The Install Screen will appear.
Click Install Drivers
Do NOT install
the DWL-G122
USB Adapter into your
computer before
installing the driver
software on the D-Link
CD!
If the CD Autorun function does not
automatically start on your computer ,
type “D:\Driver\Setup.exe” If it does
start, proceed to the next screen.
Click Next
Click Next
Click Next
The letter “D”
represents the
letter of the CD-ROM
drive. Your CD-ROM
drive may be a different
drive letter.
Click Continue Anyway
Click No, I will restart
my computer later
Click Finish
Shut down your computer
Installing the DWL-G122 Wireless USB
Adapter to Your Laptop Computer
A. Make sure to turn off your computer.
B. Insert one end of the USB Adapter into the provided
USB cable and plug the other end into your computer’s
USB Port.
Restart Your Computer
When you restart your computer
this Found New Hardware
Wizard (Windows XP) screen
will appear:
Select Install the software
automatically (Recommended)
Click Next
Windows XP will automatically
load the driver files.
Click Continue Anyway
Click Finish
For Windows 2000, this
Digital Signature Not
Found screen may appear
during the installation.
Click Yes to continue
the installation
For Windows Me and 98, this
screen may appear.
Click Yes to finalize the
installation
Your Installation is Complete!
After you’ve continued in Windows XP (or after the computer restarts in the
other Windows operating systems), the D-Link AirPlus DWL-G122 Configuration Utility will automatically start and the utility icon will appear in
the bottom right hand corner of the desktop screen (systray). If this icon
appears GREEN, then you have successfully installed the DWL-G122,
are connected to a wireless network and are ready to communicate!
Double-click the utility icon to use
the configuration utility.
Appendix
Using the Configuration Utility
A. Status: Displays the
MAC Address of the
Access Point that is
associated with the
DW L-G122.
B. SSID : The Service Set Identifier
is the name assigned to the
wireless network. The factory
SSID setting is set to default.
C. Frequency:
Displays the current
frequency used by
the adapter.
D. Wireless Mode: The factory setting is set to Infrastructure. Ad-Hoc mode is used for
peer-to-peer networking.
E. Encryption: Displays the current encryption status of the wireless connection.
F. Connection Info:
Displays connected or
authenticated
information.
G. TxRate: The
default setting is
Auto; meaning,
TxRate settings
are automatically
determined by
the DWL-G122
depending on the
distance from the
access point.
H. Channel: Displays
the channel
information. By
default, the channel
is set to 6. Please
note that the DW LG122 will automatically adjust channel
depending on the
Access Point.
J. Packet Count: Graphically displays the statistics of data
transmitted and received.
I. Signal
Strength / Link
Quality: Represents the
wireless signal
quality and
strength between
the access point
and the DW LG122. The
percentage
coincides with
the graphical bar.
Appendix
Using the Configuration Utility (cont.)
K. SSID: The Service Set
Identifier is the name assigned to the wireless
network. The factory SSID
setting is set to default. Make
changes here to match the
SSID on existing W ireless
Router or Access Point.
L. Wireless Mode:
The factory setting is
set to Infrastructure.
Ad-Hoc mode is used
for peer-to-peer
networking.
M. Data Encryption: The
default setting is set to
Disabled. The adapter
supports W EP when
encryption is enabled.
N. Authentication: You can specify
the authentication mode for the
wireless network. The default
setting is set to Open Authentication.
O. Key Length: W hen encryption is enabled,
you will have the option to specify the level and
key format of the encryption used. Select the
appropriate Key Index : 1-4 and enter ACSII or
hexadecimal digits in the appropriate field.
P. IEEE 802.1x: When encryption is enabled, you will have the option to specify the level
and key format of the encryption used. Select the appropriate Key Index : 1-4 and enter
ACSII or hexadecimal digits in the appropriate field.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
"D-Link declare that DWL-G122 (802.11g/2.4GHz Wireless USB Adapter)
is limited in CH1~CH11 by specified firmware controlled in USA."
The equipment has been SAR-evaluated and authorized for use in laptops / notebook

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2004:06:25 09:49:08Z
Modify Date                     : 2004:07:30 11:12:05+08:00
Page Count                      : 9
Creation Date                   : 2004:06:25 09:49:08Z
Author                          : 05723
Producer                        : Acrobat PDFWriter 5.0Windows NT ª©
Mod Date                        : 2004:07:30 11:12:05+08:00
Metadata Date                   : 2004:07:30 11:12:05+08:00
Title                           : C:\Documents and Settings\05723
Creator                         : 05723
Has XFA                         : No

EXIF Metadata provided by EXIF.tools