D Link DWLG810A1 802.11g High-Speed Ethernet to Wireless Bridge User Manual dwl520d1 manual 100 061703

Download:
Mirror Download [FCC.gov]
Document ID	371153
Application ID	EP7vSKbMFYEn/DfVkMdohw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	101.54kB (1269310 bits)
Date Submitted	2003-11-05 00:00:00
Date Available	2003-11-05 00:00:00
Creation Date	2003-10-15 23:53:00
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-10-31 17:11:00
Document Title	dwl520d1_manual_100_061703
Document Creator	Adobe PageMaker 7.0
Document Author:	baller

TM
D-Link AirPlus Xtreme G
DWL-G810
High-Speed 802.11g
Ethernet Wireless Bridge
Manual
Building Networks for People
Contents
Package Contents ................................................................................3
Introduction............................................................................................4
Wireless Basics ....................................................................................6
Getting Started ......................................................................................9
Web Configuration .............................................................................. 11
Troubleshooting ...................................................................................17
Technical Specifications ......................................................................23
Contacting Technical Support ..............................................................25
Warranty and Registration ...................................................................26
Package Contents
Contents of Package:

 D-Link AirPlus Xtreme G TM DWL-G810
High-Speed 802.11g Ethernet Wireless Bridge

 Manual and Warranty on CD

 Ethernet Cable

 Quick Installation Guide
If any of the above items are missing, please contact your reseller.
System Requirements for Configuration:

 A computer or laptop with an Ethernet adapter. (We recommend that
you use an Ethernet connection to configure the DWL-G810.)

 A current web-browser (e.g., Internet Explorer 6.0 or Netscape
Navigator 6.0 or later) for configuration
For Use: You will need an Ethernet-enabled device such as a game console, laptop or
desktop computer, network printer or set top box. The DWL-G810 will transform virtually
any Ethernet device into a wireless device, enabling wireless communication over your
network or in an Ad-Hoc/Peer-to-Peer mode.
Introduction
The D-Link AirPlus Xtreme G TM DWL-G810 High-Speed Ethernet Wireless Bridge is an
802.11g high-performance, wireless device that can be implemented in a variety of ways
by converting an Ethernet connection into a one that is capable of wireless connectivity.
For devices with a built-in Ethernet port, the DWL-G810 provides a cost-effective way to
gain wireless connectivity, virtually transforming wired devices into wireless units! Connect
any Ethernet-enabled device to an existing 802.11g wireless network (achieving speeds
up to 54Mbps) using the DWL-G810. (The DWL-G810 is also backwards compatible
with 802.11b devices.)
Typical applications include connecting a printer to a wireless network and connecting
Ethernet-enabled devices such as game consoles or set top boxes to a Wireless Local
Area Network (WLAN). Simply connect the DWL-G810 to the Ethernet (RJ-45) port of a
game console, network device, such as a network storage device, Internet camera,
network printer, network scanner, or other similar device. Using the DWL-G810 allows
the flexibility of placing network devices in remote locations while maintaining a highspeed connection.
Whether you are using the DWL-G810 in Ad-Hoc or Infrastructure mode, you can use the
convenient Setup Wizard for easy installation. Please refer to the Quick Installation
Guide that is included with your purchase for instructions on how to use the Setup Wizard.
Please read through this manual if you would like to learn more about wireless technology
and enjoy the high-speed wireless possibilities available to you with the DWL-G810
High-Speed Ethernet Wireless Bridge!
Features & Benefits

 Transforms an Ethernet device into a wireless device

 Five times faster - achieve data transfer speeds up to 54 Mbps; up to 5x
faster than conventional 802.11b networks, when used with other 802.11g
devices

 Fully compliant with the 802.11b standard and interoperable with all
existing 802.11b-compliant and 802.11g compliant devices

 Quick and Simple connectivity via Ethernet

 Equipped with one 10/100 Ethernet port, Auto-MDI/MDIX

 Easy web-based configuration when changing settings

 Encryption to provide a level of security for data transfers

 Supports Ad-Hoc or Infrastructure modes
LEDs
Wireless Link/Act – a steady
Yellow light indicates a wireless
connection. A blinking light
indicates that the DWL-G810 is
receiving/transmitting from/to the
wireless network.
Power – a steady
Green light indicates a
proper connection to a
power source.
Wireless Basics
With the DWL-G810 you can provide instant wireless access to the LAN (Local Area
Network) for Ethernet-enabled devices. With an Ethernet (CAT5) cable simply connect
the DWL-G810 to the Ethernet port of a network device (such as a printer or web camera)
to establish a wireless connection with another device equipped with a wireless network
adapter set to Ad-Hoc mode.
If you are planning a larger wireless network, D-Link offers a wide array of products for
most of your wireless local area network (WLAN) needs. In this section, we discuss
typical WLANs and their components. Much of the advice given here may be helpful in
setting up the DWL-G810. It may also give you some ideas, if you plan to expand your
wireless network.
D-Link wireless products are based on industry standards to provide easy-to-use and
compatible high-speed wireless connectivity within your home, business or public access
wireless networks. D-Link wireless products will allow you access to the data you want,
when and where you want it. You will be able to enjoy the freedom that wireless networking
brings.
A WLAN is a computer network that transmits and receives data with radio signals
instead of wires. WLANs are used increasingly in both home and office environments,
and public areas such as airports, coffee shops and universities. Innovative ways to
utilize WLAN technology are helping people to work and communicate more efficiently.
Increased mobility and the absence of cabling and other fixed infrastructure have proven
to be beneficial for many users.
Wireless users can use the same applications they use on a wired network. Wireless
adapter cards used on laptop and desktop systems support the same protocols as
Ethernet adapter cards.
People use WLAN technology for many different purposes:
Mobility - Productivity increases when people have access to data in any location
within the operating range of the WLAN. Management decisions based on real-time
information can significantly improve worker efficiency.
Low Implementation Costs – WLANs are easy to set up, manage, change and
relocate. Networks that frequently change can benefit from WLANs ease of implementation.
WLANs can operate in locations where installation of wiring may be impractical.
Installation and Network Expansion - Installing a WLAN system can be fast and
easy and can eliminate the need to pull cable through walls and ceilings. Wireless
technology allows the network to go where wires cannot go - even outside the home or
office.
Wireless Basics (continued)
Scalability – WLANs can be configured in a variety of ways to meet the needs of
specific applications and installations. Configurations are easily changed and range
from Peer-to-Peer networks suitable for a small number of users to larger infrastructure
networks to accommodate hundreds or thousands of users, depending on the number of
wireless devices deployed.
Inexpensive Solution - Wireless network devices are as competitively priced as
conventional Ethernet network devices.
The DWL-G810 is compatible with 802.11g and 802.11b wireless products, which include:

 D-Link Air DWL-650,D-Link AirPlus DWL-650+,
TM
D-Link AirPlus Xtreme G DWL-G650
2.4GHz Wireless Cardbus Adapters used with laptop computers

 D-Link AirPlus Xtreme G TM DWL-G520, D-Link Air DWL-520, D-Link
AirPlus DWL-520+
2.4GHz Wireless PCI cards used with desktop computers

 D-Link AirPlus DWL-900AP+, D-Link AirPlus Xtreme GTM DWL-2000AP
2.4GHz Wireless Access Points

 D-Link AirPlus DI-614+, DI-714P+, D-Link AirPlus Xtreme GTM DI-624 and
D-Link Air XpertTM DI-774
Wireless Broadband Routers
Standards-Based Technology
The DWL-G810 High-Speed Ethernet Wireless Bridge utilizes the 802.11b and the
802.11g standard. The IEEE 802.11g standard is an extension of the 802.11b standard.
It increases the data rate up to 54 Mbps within the 2.4GHz band, utilizing OFDM
technology.
This means that in most environments, within the specified range of this device, you will
be able to transfer large files quickly or even watch a movie in MPEG format over your
network without noticeable delays. This technology works by transmitting high-speed
digital data over a radio wave utilizing OFDM (Orthogonal Frequency Division Multiplexing)
technology. OFDM works by splitting the radio signal into multiple smaller sub-signals
that are then transmitted simultaneously at different frequencies to the receiver. OFDM
reduces the amount of crosstalk (interference) in signal transmissions. The D-Link DWLG810 will automatically sense the best possible connection speed to ensure the greatest
speed and range possible.
The DWL-G810 is backwards compatible with 802.11b devices. This means that if you
have an existing 802.11b network, the devices in that network will be compatible with
802.11g devices at speeds up to 11Mbps in the 2.4GHz range.
Wireless Basics (continued)
Installation Considerations
TM
The D-Link AirPlus Xtreme G DWL-G810 lets you access your network using a
wireless connection from virtually anywhere within its operating range. Keep in mind,
however, that the number, thickness and location of walls, ceilings, or other objects that
the wireless signals must pass through, may limit the range. Typical ranges vary depending
on the types of materials and background RF (radio frequency) noise in your home or
business. The key to maximizing wireless range is to follow these basic guidelines:
1 Keep the number of walls and ceilings between the DWL-G810 and other network
devices to a minimum - each wall or ceiling can reduce your DWL-G810’s range
from 3-90 feet (1-30 meters.) Position your devices so that the number of walls
or ceilings is minimized.
2 Be aware of the direct line between network devices. A wall that is 1.5 feet thick
(.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At
a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so
that the signal will travel straight through a wall or ceiling (instead of at an
angle) for better reception.
3 Building materials can impede the wireless signal - a solid metal door or aluminum
studs may have a negative effect on range. Try to position wireless devices and
computers with wireless adapters so that the signal passes through drywall or
open doorways and not other materials.
4 Keep your product away (at least 3-6 feet or 1-2 meters) from electrical
devices or appliances that generate RF noise.
Getting Started
With its default settings, the DWL-G810, when activated, will connect
with other D-Link AirPlus Xtreme G TM products, right out of the box.
There are basically two modes of networking:
Infrastructure – using an access point or router
Ad-Hoc – directly connecting to another computer, for Peer-toPeer communication, using wireless network adapters on
each computer, such as two or more DWL-G520 Wireless
Network Adapters
This example illustrates an Ad-Hoc setup. Simply connect the DWL-G810 (refer to the
Quick Installation Guide) to your Ethernet-capable network device (in this case, a gaming
console) and you will be able to connect wirelessly with other gaming consoles also
connected to DWL-G810’s.
Getting Started (continued)
Infrastructure Mode
This example illustrates an Infrastructure setup. To connect the DWL-G810 to a wireless
network with a wireless router or access point, please refer to the printed Quick Installation
Guide included with the product. Web configuration is required to connect the DWLG810.
10
Web Configuration
Requirements for using the DWL-G810’s Web
Configuration Utility
If you are incorporating the DWL-G810 into a network that contains all D-Link
devices, you do not need to use the Web Configuration utility. With its default
settings, the DWL-G810 will connect with other D-Link 802.11b or 802.11g devices
that are set to their default settings, with no configuration needed!
If your network contains devices other than D-Link devices, or if you wish to configure
the DWL-G810, you will need to do the following before using the Web Configuration
Utility:
You will need a JavaScript-enabled web-browser such as the Internet Explorer 6.0 or later, or the Netscape Navigator 6.0 or later.
The computer that you are using for initial configuration must have an IP
address within the same range as the IP address of the DWL-G810. The
DWL-G810 has a default IP address of 192.168.0.30 with a subnet mask of
255.255.255.0
You will need to assign a static IP address to the computer that you are
using to configure the DWL-G810, within the IP address range of the DWLG810. For example, you can assign a static IP address of 192.168.0.2 with
a subnet mask of 255.255.255.0 to the computer you will use for configuration. (Please refer to the Appendix section of the Quick Installation Guide.)
Factory Default Settings for the DWL-G810
Operating Mode:
Infrastructure
SSID:
default
Channel:
Transmission rates:
Auto
Encryption:
No
Administrator Password:
Blank (no password needed)
IP Address Mode:
Static
IP Address:
192.168.0.30
IP Subnet:
255.255.255.0
username:
admin
11
Web Configuration (continued)
Whenever you want to configure your network or the DWL-G810, you can access the
Configuration Utility by opening the web-browser and typing in the IP address of the
DWL-G810. The DWL-G810 default IP address is shown below:
Open the web browser.
Type in the IP address of the access point.
http://192.168.0.30
(The IP address shown in this example is the
default setting. Use this IP address when
connecting to a network consisting of other DLink devices set to their default settings. If you
have changed the IP address of the DWL-G810
to conform to a network other than one with DLink devices, at their default setting, then input
that IP address in the web browser, instead of the
default IP address shown.)
Type admin in the User name field.
Leave the Password blank.
Click OK.
The Home window will
appear. Please refer to
the Quick Installation
Guide, included with your
purchase, for more information regarding the
Setup Wizard, accessible here. Once you
have completed the configuration of the DWLG810, the current settings will be displayed in
this window
12
Connect to 192.168.0.30
Web Configuration (continued)
Network
This window displays the
default settings of the DWLG810. The default IP address
is 192.168.30. If you select
Dynamic IP Address, you
will obtain a dynamic IP
address from a DHCP server
on your network.
The Subnet Mask is
255.255.255.0. Input the IP
address of the Gateway (the
router on your network.)
Click Apply if you have
made any changes.
Operating Mode:
Select Ad-Hoc or
Infrastructure.
Wireless
AP Name: You may choose
to rename your DWL-G810,
especially if you have more
than one access point on your
network.
SSID: The Service Set
Identifier is a unique name
that identifies a network. All
devices on a network must
share the same SSID name
in order to communicate. If
you choose to change the
SSID from the default
setting, input your new SSID
name in this field. The SSID
can be up to 32 characters in
length.
13
Web Configuration (continued)
Wireless (continued)
Channel: Devices communicating in Ad-Hoc mode must be set to the same channel.
WEP Encryption: Select Enable Encryption to use WEP (Wired Equivalent Privacy)
on the network. All devices on the network must share the same WEP selection – either
Enable or Disable, and they must share the same WEP key. The WEP key is generated
from ASCII or Hexadecimal entries that are either 64-bit or 128-bit in length. When
enabling encryption, select the Key Type (ASCII or Hexadecimal) and then input the
appropriate digits or letters. You can create up to 4 keys. Select the key you wish to
use.
Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
Tx Rate: Select the transmission rate for the network.
Authentication:
Open System – communicates the key across the network.
Shared Key – devices must have identical WEP settings to communicate.
Click Apply if you have made any changes or additions.
14
Web Configuration (continued)
Admin
Administrator Settings: Change your password in this window. Re-enter the new
password to confirm. It can be up to 14 characters in length. Please keep a copy of your
password in a safe place.
Click Apply, if you have made any changes.
System Settings: The current system settings can be saved as a file onto the local
hard drive by clicking Save. The saved file can be loaded back on the DWL-G810 by
clicking Browse. When you have selected the settings file, click Load.
Click Restore to return to Factory Default Settings.
Firmware Upgrade: Upgrade the firmware for the DWL-G810. Find upgrades to the
firmware at http://support.dlink.com. After you have downloaded a firmware upgrade to
your local drive, click Browse. Select the firmware and click Apply to complete the
upgrade.
15
Web Configuration (continued)
Help
The Help window displays information about each window in the Configuration menu.
When you change the settings in the Configuration menu, you will need to restart the
DWL-G810 for the changes to take effect.
16
Troubleshooting
This section provides solutions to situations that can occur during the installation and
operation of the DWL-G810 High-Speed Ethernet Wireless Bridge.
1. How do I assign a static IP address in Windows XP/2000?
Please note that routers will automatically assign IP addresses to the computers on the
network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using
a DHCP-capable router you will not need to assign static IP addresses.
If you are not using a DHCP capable router, or you need to assign a static IP
address, please follow these instructions:
Go to Start.
Double-click on Control Panel.
Double-click on Network Connections.
17
Troubleshooting (continued)
How do I assign a Static IP Address in Windows XP/2000?
(continued)
Right-click on Local Area
Connections.
Double-click Properties.
D-Link DWL-G650
Click Internet Protocol
(TCP/IP).
Click Properties.
18
Troubleshooting (continued)
How do I assign a Static IP Address in Windows XP/2000?
(continued)
Select Use the following IP
address.
Enter the IP address.
Enter the Subnet mask.
Enter the Default Gateway.
The Default Gateway is the
LAN IP address of the
wireless router. D-Link
wireless routers have a LAN
IP address of 192.168.0.1
Select Use the following
DNS server address. Enter
the LAN IP address of the
wireless router. (D-Link
wireless routers have a LAN
IP address of 192.168.0.1)
Click OK.
You have completed the assignment of a static IP address in Windows XP/2000!
The IP addresses on your network must be
within the same range. For example, if one
computer has an IP address of 192.168.0.2,
the other computers should have IP
addresses that are sequential, like 192.168.0.3 and
192.168.0.4. The subnet mask must be the same for all
the computers on the network.
19
Troubleshooting (continued)
2. How do I assign a static IP address in Macintosh OSX?
Go to the Apple Menu and select
System Preferences.
Click Network.
Select Built-in Ethernet in
the Show pull-down menu.
Select Manually in the
Configure pull-down menu.
Input the static IP address, the
subnet mask and the router IP
address in the appropriate fields.
Click Apply Now.
You have completed the assignment of a
static IP address in Macintosh OS X!
20
Troubleshooting (continued)
3. Why doesn’t the Power LED light up?
Check to see if the DWL-G810 power adapter is connected properly to a
known good power outlet.
4. Why doesn’t the Link LED light up?

 Make sure that the Ethernet cable is connected properly.

 Make sure the AC power adapter is plugged in properly.

 For advanced setup features, enter http://192.168.0.30 into your Internet browser
and gain access to the web configuration of the DWL-G810. The advanced setup
features can be used to change the LAN and wireless settings for your
DWL-G810.
5. Why can’t I connect to another wireless client
in Ad-Hoc mode?

 The DWL-G810 High-Speed Ethernet Wireless Bridge has a default SSID of
default. Make sure that the SSID on the DWL-G810 is exactly the same as the
SSID on the other wireless client.

 The DWL-G810 has a default channel of 6. Make sure that the channel on the
DWL-G810 is exactly the same as the channel on the other wireless client.
6. Why can’t I connect to an access point or wireless
router?

 Make sure that the SSID on the DWL-G810 is exactly the same as the
SSID on the access point or wireless router.

 Move the DWL-G810 and access point or wireless router into the same
room and then test the wireless connection.

 Disable all security settings. (WEP, MAC Address Control, AES).

 Turn off your access point and the device with the DWL-G810. Turn on
the access point, and then turn on the device with the DWL-G810.

 Make sure that the DWL-G810 is set to Infrastructure mode.
7. What can I do if I forget my encryption key?
Reset the access point to its factory default settings and restore the
DWL-G810 to its factory default settings. You may do this by pressing
the Reset button on the back of the unit.You will lose the current
configuration settings.
21
Troubleshooting (continued)
8. Why can’t I connect the DWL-G810 to my network?

 Check that the LED indicators for the broadband modem are indicating normal
activity. If not, there may be a problem with the broadband connection.

 Check that the LED indicators on the wireless router are functioning properly. If
not, check that the AC power and Ethernet cables are firmly connected.

 Check that the IP address, subnet mask, gateway, and DNS settings are correctly
entered for the network.

 In Infrastructure mode, make sure the same Service Set Identifier (SSID) is
specified on the settings for the wireless clients and access points. The SSID
factory default setting for D-Link products is default.

 In Ad-Hoc mode, both wireless clients will need to have the same SSID. Please
note that it might be necessary to set up one client to establish a BSS (Basic
Service Set) and wait briefly before setting up other clients. This prevents several
clients from trying to establish a BSS at the same time, which can result in
multiple singular BSSs being established, rather than a single BSS with multiple
clients associated to it.

 Check that the Network Connection for the wireless client is configured properly.
Select Infrastructure when connecting to a wireless router and select Ad-Hoc
mode when connecting without an access point.

 If security is enabled, make sure that the correct encryption keys are entered on
both the DWL-G810 and the wireless router or Ad-Hoc client.
9. What variables may cause my wireless products to lose
reception?
D-Link products let you access your network from virtually anywhere you want.
However, the positioning of the products within your environment will affect the
wireless range. Please refer to Installation Considerations in the Wireless
Basics section of this manual for further information about the most advantageous
placement of your D-Link wireless products.
10. Why does my wireless connection drop?

 Antenna orientation – try different antenna orientations for the DWL-G810. Try to
keep the antenna at least 6 inches away from the wall or other objects.

 If you are using 2.4GHz cordless phones, X-10 equipment or other home security
systems, ceiling fans, and lights, your wireless connection will degrade
dramatically or drop altogether. Try changing the channel on your router, access
point and all other devices on the network to avoid interference.

 Keep your product away (at least 3-6 feet) from electrical devices that generate
RF noise, like microwaves, monitors, electric motors, etc.
22
Technical Specifications
Standards:
IEEE 802.11
IEEE 802.11b
IEEE 802.11g
IEEE 802.3 Ethernet
IEEE 802.3u
Port:
10/100 Mbps Fast Ethernet Auto MDI/MDIX
Data Rates with Automatic Fallback:
54Mbps
22Mbps
11Mbps
5.5Mbps
2Mbps
1Mbps
Encryption:
64-bit RC4
128-bit RC4
Media Access Control:
CSMA/CA with ACK
Frequency Range:
2.4GHz to 2.4385GHz
Operating Range:
Indoors – Up to 328 ft. (100m)*
Modulation Technology:
PBCC – Packet Binary Convolutional Coding
DSSS – Direct Sequence Spread Spectrum
11-chip Barker sequence
Modulation Techniques:
PBCC (22Mbps/8.5db)
PBCC (11Mbps/4.5db)
CCK (11Mbps/8.5db)
PBCC (5.5Mbps/1.5db)
CCK (5.5Mbps/5.5db)
Barker (2Mbps/3db)
Barker (1Mbps/0db)
*Environmental factors may adversely affect range
23
Technical Specifications (continued)
Power Input:
External Power Supply, DC 5V, 2.5A
LEDs:
Power (Green)
Activity (Yellow)
Transmitter Output Power:
15dBm ± 2dB
External Antenna Type:
Detachable 2.0dBi gain with reverse SMA connector
Over-Driving Levels:
Tolerates up to +17dBm at the antenna
Device Management:
Web-Based – Internet Explorer v6 or later; Netscape Navigator v6 or later; or
other Java-enabled browsers
Temperature:
Operating: 32°F to 131°F (0°C to 55°C)
Storing: 4°F to 167°F (-20°C to 75°C)
Humidity:
95% maximum (non-condensing)
Safety & Emissions:
FCC
UL
Dimensions:
L=3.5 inches (90mm)
W=3.2 inches (82mm)
H=1.6 inches (40mm)
Weight:
0.34 lbs (153g)
Warranty:
3 Year
24
Technical Support
You can find software updates and user documentation on the D-Link website.
D-Link provides free technical support for customers within the United States and
within Canada for the duration of the warranty period on this product.
U.S. and Canadian customers can contact D-Link Technical Support through our
website, or by phone.
Tech Support for customers within the United States:
D-Link Technical Support over the Telephone:
(877) 453-5465
24 hours a day, seven days a week.
D-Link Technical Support over the Internet:
http://support.dlink.com
email:support@dlink.com
Tech Support for customers within Canada:
D-Link Technical Support over the Telephone:
(800) 361-5265
Monday to Friday 8:30am to 9:00pm EST
D-Link Technical Support over the Internet:
http://support.dlink.ca
email:support@dlink.ca
25
Warranty and Registration
(USA only)
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited
warranty for its product only to the person or entity that originally purchased the product from:
•
•
D-Link or its authorized reseller or distributor and
Products purchased and delivered within the fifty states of the United States, the District of
Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, addresses with an
APO or FPO.
Limited Warranty: D-Link warrants that the hardware portion of the D-Link products described
below will be free from material defects in workmanship and materials from the date of original retail
purchase of the product, for the period set forth below applicable to the product type (“Warranty
Period”), except as otherwise stated herein.
3-Year Limited Warranty for the Product(s) is defined as follows:
•
•
•
Hardware (excluding power supplies and fans) Three (3) Years
Power Supplies and Fans One (1) Year
Spare parts and spare kits Ninety (90) days
D-Link’s sole obligation shall be to repair or replace the defective Hardware during the Warranty Period
at no charge to the original owner or to refund at D-Link’s sole discretion. Such repair or replacement will
be rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need not be
new or have an identical make, model or part. D-Link may in its sole discretion replace the defective
Hardware (or any part thereof) with any reconditioned product that D-Link reasonably determines is
substantially equivalent (or superior) in all material respects to the defective Hardware. Repaired or
replacement Hardware will be warranted for the remainder of the original Warranty Period from the date
of original retail purchase. If a material defect is incapable of correction, or if D-Link determines in its sole
discretion that it is not practical to repair or replace the defective Hardware, the price paid by the original
purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective
Hardware. All Hardware (or part thereof) that is replaced by D-Link, or for which the purchase price is
refunded, shall become the property of D-Link upon replacement or refund.
Limited Software Warranty: D-Link warrants that the software portion of the product (“Software”)
will substantially conform to D-Link’s then current functional specifications for the Software, as set forth
in the applicable documentation, from the date of original retail purchase of the Software for a period of
ninety (90) days (“Warranty Period”), provided that the Software is properly installed on approved
hardware and operated as contemplated in its documentation. D-Link further warrants that, during the
Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical
defects. D-Link’s sole obligation shall be to replace the non-conforming Software (or defective media)
with software that substantially conforms to D-Link’s functional specifications for the Software or to
refund at D-Link’s sole discretion. Except as otherwise agreed by D-Link in writing, the replacement
Software is provided only to the original licensee, and is subject to the terms and conditions of the
license granted by D-Link for the Software. Software will be warranted for the remainder of the original
Warranty Period from the date or original retail purchase. If a material non-conformance is incapable of
correction, or if D-Link determines in its sole discretion that it is not practical to replace the nonconforming Software, the price paid by the original licensee for the non-conforming Software will be
refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is first returned
to D-Link. The license granted respecting any Software for which a refund is given automatically
terminates.
Non-Applicability of Warranty: The Limited Warranty provided hereunder for hardware and software
of D-Link’s products will not be applied to and does not cover any refurbished product and any product
purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers,
or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case,
the product is being sold “As-Is” without any warranty whatsoever including, without limitation, the
Limited Warranty as described herein, notwithstanding anything stated herein to the contrary.
Submitting A Claim: The customer shall return the product to the original purchase point based on its
return policy. In case the return policy period has expired and the product is within warranty, the
customer shall submit a claim to D-Link as outlined below:
26
•
The customer must submit with the product as part of the claim a written description of the
Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm
the same.
•
The original product owner must obtain a Return Material Authorization (“RMA”) number from
the Authorized D-Link Service Office and, if requested, provide written proof of purchase of
the product (such as a copy of the dated purchase invoice for the product) before the
warranty service is provided.
•
After an RMA number is issued, the defective product must be packaged securely in the
original or other suitable shipping package to ensure that it will not be damaged in transit, and
the RMA number must be prominently marked on the outside of the package. Do not include any
manuals or accessories in the shipping package. D-Link will only replace the defective portion
of the Product and will not ship back any accessories.
•
The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery
(“COD”) is allowed. Products sent COD will either be rejected by D-Link or become the
property of D-Link. Products shall be fully insured by the customer. D-Link will not be held
responsible for any packages that are lost in transit to D-Link. The repaired or replaced
packages will be shipped to the customer via UPS Ground or any common carrier selected by
D-Link, with shipping charges prepaid. Expedited shipping is available if shipping charges are
prepaid by the customer and upon request.
•
Return Merchandise Ship-To Address
USA: 53 Discovery Drive, Irvine, CA 92618
Canada: 2180 Winston Park Drive, Oakville, ON, L6H 5W1 (Visit http://www.dlink.ca for detailed
warranty information within Canada)
D-Link may reject or return any product that is not packaged and shipped in strict compliance with the
foregoing requirements, or for which an RMA number is not visible from the outside of the package. The
product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product
that is not packaged and shipped in accordance with the foregoing requirements, or that is determined
by D-Link not to be defective or non-conforming.
What Is Not Covered: This limited warranty provided by D-Link does not cover: Products, if in D-Link’s
judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse,
faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the
documentation for the product, or if the model or serial number has been altered, tampered with, defaced
or removed; Initial installation, installation and removal of the product for repair, and shipping costs;
Operational adjustments covered in the operating manual for the product, and normal maintenance;
Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage;
Any hardware, software, firmware or other products or services provided by anyone other than DLink; Products that have been purchased from inventory clearance or liquidation sales or other sales in
which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the
product. Repair by anyone other than D-Link or an Authorized D-Link Service Office will void this
Warranty.
Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE
PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING,
WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY
WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO
NINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED
HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS
WITH THE PURCHASER OF THE PRODUCT.
Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE
UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY
FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER,
WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO,
DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER
FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH DLINK’S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON,
OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING
FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY
BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS
REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT. THE MAXIMUM
27
LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT
COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES
ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR
STATUTORY.
Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Some
states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited
warranty provides specific legal rights and the product owner may also have other rights which vary
from state to state.
Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered
trademarks are the property of their respective manufacturers or owners.
Copyright Statement: No part of this publication or documentation accompanying this Product may
be reproduced in any form or by any means or used to make any derivative such as translation,
transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as
stipulated by the United States Copyright Act of 1976. Contents are subject to change without prior
notice. Copyright© 2002 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.
CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communication. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
For detailed warranty outside the United States, please contact corresponding local
D-Link office.
FCC Caution:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment; such modifications could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. The antenna(s) used for this equipment must be installed to provide a separation
distance of at least eight inches (20 cm) from all persons.
This equipment must not be operated in conjunction with any other antenna.
Register your D-Link product online at http://support.dlink.com/register/
(10/15/2003)
28
Mobile of end product
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator & your
body.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Modify, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2003:10:15 23:53:00Z
Modify Date                     : 2003:10:31 17:11:00+08:00
Subject                         : dwl520d1_manual_100_061703
Page Count                      : 29
Creation Date                   : 2003:10:15 23:53:00Z
Mod Date                        : 2003:10:31 17:11:00+08:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : baller
Keywords                        : 
Metadata Date                   : 2003:10:31 17:11:00+08:00
Creator                         : baller
Title                           : dwl520d1_manual_100_061703
Description                     : dwl520d1_manual_100_061703
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools