D Link HM401TA1 Home Monitoring Gateway User Manual

D Link Corporation Home Monitoring Gateway

User Manual

Download: D Link HM401TA1 Home Monitoring Gateway User Manual
Mirror Download [FCC.gov]D Link HM401TA1 Home Monitoring Gateway User Manual
Document ID1382940
Application IDxl5ZOmMsToefZ/5fA7zf8g==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize212.2kB (2652518 bits)
Date Submitted2010-11-29 00:00:00
Date Available2010-11-29 00:00:00
Creation Date2010-11-16 18:55:12
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2010-11-25 15:05:00
Document TitleUser Manual
Document CreatorAdobe InDesign CS4 (6.0.5)

USER MANUAL
Home Monitoring Starter Kit
DHM-901T
VERSION 1.0

Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to
notify any person or organization of such revisions or changes.
Manual Revisions
Revision
Date
Description
1.0
November 15, 2010
DHM-901T Revision A1 with firmware version 1.00
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the
United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Copyright © 2010 by D-Link Systems, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc.
D-Link DHM-901T User Manual

Table of Contents
Product Overview......................................................... 4
Package Contents.................................................... 4
System Requirements.............................................. 5
Features................................................................... 6
Hardware Overview: Gateway (Front)...................... 7
Hardware Overview: Gateway (Back)...................... 8
Hardware Overview: Keypad.................................... 9
Hardware Overview: Contact Sensor..................... 10
Hardware Overview: Motion Sensor....................... 11
Hardware Installation: Gateway.............................. 12
Hardware Installation: Keypad................................ 13
Hardware Installation: Contact Sensor................... 14
Hardware Installation: Motion Sensor..................... 15
Appendix A - Technical Specifications.................... 16
Technical Specifications......................................... 16
D-Link DHM-901T User Manual
Product Overview
Package Contents
ƒƒ DHM-401T Gateway
ƒƒ DHM-301T Keypad
ƒƒ DHM-303T Contact Sensor
ƒƒ DHM-304T Motion Sensor
ƒƒ Stand for DHM-401T
ƒƒ Power adapter for DHM-401T
ƒƒ Bracket for DHM-304T
ƒƒ Batteries for DHM-301T/303T/304T
ƒƒ Mounting kits for DHM-301T/303T/304T
ƒƒ Ethernet cable
ƒƒ Quick Installation Guide
If any of the above items are missing, please contact your reseller.
D-Link DHM-901T User Manual
Product Overview
System Requirements
ƒƒ A computer with Windows XP SP2/Vista/7 or higher for configuration
D-Link DHM-901T User Manual
Product Overview
Features
Contact Sensor
The DHM-303T Contact Sensor can be used to detect whether a door or window is open or closed. You can use
this to provide security for windows, or to monitor entry and exit through a doorway, and can be used in tandem with
other sensors and keypads to monitor and control access to an area.
Motion Sensor
The DHM-304T Motion Sensor can be used to detect motion in an area. You can change the sensor's motion detection sensitivity to help you find the right balance to detect movement without false alarms.
Heartbeat Service and Low Battery Notification
Each sensor and keypad periodically sends a "heartbeat" signal to the gateway, which notifies you when the batteries in a sensor need to be changed, or if a sensor is out of range.
Expandable System
The two USB ports allow you to expand your home monitoring system by adding adapters such as a DWM-156 3G
dongle for a 3G fallback Internet connection, or a DHM-101 Z-Wave USB Dongle to allow for connection to Z-Wave
devices.
D-Link DHM-901T User Manual
Product Overview
Hardware Overview: Gateway (Front)
LEDs
- Status
- Alarm
- Online
- Event
D-Link DHM-901T User Manual
Product Overview
Hardware Overview: Gateway (Back)
LAN Port
Connects to your router.
USB Ports
Connect to compatible USB devices, such
as the DHM-101 Z-Wave USB Dongle.
Learn/Reset Button
Turns on pairing mode.
Power Connector
Connects to the included power
adapter.
D-Link DHM-901T User Manual
Product Overview
Hardware Overview: Keypad
LEDs
- Active/Operation
- Status
- Alarm/Error
Status Button
Armed Home Button
Armed Away Button
Help Button
Clear Events Button
D-Link DHM-901T User Manual
Product Overview
Hardware Overview: Contact Sensor
Pairing Button and LED
Contact Sensor Piece
D-Link DHM-901T User Manual
10
Product Overview
Hardware Overview: Motion Sensor
Pairing Button and LED
D-Link DHM-901T User Manual
11
Product Overview
Hardware Installation: Gateway
Inserting batteries into your DHM-401T Gateway (optional)
ƒƒ Remove the battery cover and insert 6 AAA batteries (not included) as indicated.
ƒƒ Replace the battery cover.
Connect the DHM-401T Gateway
ƒƒ Connect one end of the included Ethernet cable to an available LAN port on your router, and connect the other
end to the WAN port on the DHM-401T.
ƒƒ Connect the power adapter to the DHM-401T.
D-Link DHM-901T User Manual
12
Product Overview
Hardware Installation: Keypad
Inserting batteries into your DHM-301T Keypad
ƒƒ Slide and remove the battery cover on the back of the keypad, then insert 2 AAA batteries as indicated.
ƒƒ Replace the battery cover.
Pairing the DHM-301T Keypad
ƒƒ Press and hold the pairing button on the DHM-401T Gateway until you hear a beep and the Online Status LED
flashes green. You now have 60 seconds to pair sensors to the gateway.
ƒƒ Press and hold the 1 and 2 buttons on the DHM-301T Keypad at the same time.
ƒƒ When the 2 devices have successfully paired, the DHM-401T gateway will beep 2 times, and the DHM-301T Keypad will beep 4 times.
Mounting the DHM-301T Keypad (optional)
ƒƒ You can hang the keypad 2 different ways.
ƒƒ You can push in and slide the D-Link logo up to uncover 2 screw holes you can use to mount the keypad to a wall
using the included screws.
ƒƒ Alternatively, you can insert the included screws into a wall, then use the mounting holes on the back of the keypad to hang it on the screws.
D-Link DHM-901T User Manual
13
Product Overview
Hardware Installation: Contact Sensor
Inserting batteries into your DHM-303T Contact Sensor
ƒƒ Use a coin to open the case, then lift the top cover off of the contact sensor.
ƒƒ Insert the CR123A 3V battery as indicated.
ƒƒ Replace the top cover of the contact sensor and make sure the two halves snap together.
Pairing the DHM-303T Contact Sensor
ƒƒ Press and hold the pairing button on the DHM-401T Gateway until you hear a beep and the Online Status LED
flashes green. You now have 60 seconds to pair sensors to the gateway.
ƒƒ Press the pairing button on the front of the DHM-303T Contact Sensor. The LED will turn on.
ƒƒ When the 2 devices have successfully paired, the DHM-401T gateway will beep 2 times, and the LED on the
DHM-303T Contact Sensor will flash for 2 seconds.
Mounting the DHM-303T Contact Sensor
ƒƒ Make sure your door or window is closed, then use one of the included adhesive strips from the included DHM303T mounting kit to attach the contact sensor piece to the edge of your door or window.
ƒƒ Put the screws from the included DHM-303T mounting kit through the two holes at the top and bottom of the main
contact sensor and mount it to your door frame or window frame next to the contact sensor piece.
ƒƒ Make sure that the main contact sensor and the contact sensor piece are aligned to that the small ridge on both
parts are next to each other when your door or window is closed. The main contact sensor's LED will flash when
the contact sensor piece is moved next to or away from it.
D-Link DHM-901T User Manual
14
Product Overview
Hardware Installation: Motion Sensor
Inserting batteries into your DHM-304T Motion Sensor
ƒƒ Slide and remove the battery cover on the top of the Motion Sensor, then insert 2 AAA batteries as indicated.
ƒƒ Replace the battery cover.
Pairing the DHM-304T Motion Sensor
ƒƒ Press and hold the pairing button on the DHM-401T Gateway until you hear a beep and the Online Status LED
flashes green. You now have 60 seconds to pair sensors to the gateway.
ƒƒ Press the pairing button on front of the DHM-304T Motion Sensor. The LED will turn on.
ƒƒ When the 2 devices have successfully paired, the DHM-401T gateway will beep 2 times, and the LED on the
DHM-304T Motion Sensor will flash for 2 seconds.
Mounting the DHM-304T Motion Sensor
ƒƒ Put the screw from the included DHM-304T mounting kit through the hole in the DHM-304T bracket and mount it
to a wall. Alternatively, you can use the adhesive strip from the included DHM-303T mounting kit to mount it to a
wall.
ƒƒ Push the ball on the DHM-304T bracket into the socket on the back of the DHM-304T Motion Sensor until it snaps
into place. You can then adjust the angle and position of the Motion Sensor as you wish.
D-Link DHM-901T User Manual
15
Appendix A - Technical Specifications
Technical Specifications
Frequency
ƒƒ 315 MHz
Operating Temperature
ƒƒ -10 to 50 °C (14 to 122 °F), Indoor use
Humidity
ƒƒ 5% - 95% RH non-condensing
DHM-401T Gateway
ƒƒ Transmission Range: Minimum 70 meters in open
air
ƒƒ Audio: 1 x Buzzer, 1 x Siren
ƒƒ Siren Volume: 85 db
ƒƒ USB: 2 x USB 2.0 compliant ports for compatible
3G dongles, Zigbee dongles, or Z-Wave dongles
ƒƒ Power: External power adapter, 100-120 V
50 / 60 Hz input, 12 V / 2 A output, 6 x AAA battery
for backup power
ƒƒ Backup Battery Life: 50 minutes with alkaline
batteries
ƒƒ LEDs: Status, Alarm, Online, Event
ƒƒ Dimensions: 206 x 133 x 31.5 mm
D-Link DHM-901T User Manual
DHM-301T Keypad
ƒƒ Transmission Range: Minimum 70 meters in free
space
ƒƒ Power: 2 x AAA batteries
ƒƒ Battery Life: 1 year with alkaline batteries
ƒƒ LEDs: Active/Operation, Status, Alarm/Error
ƒƒ Dimensions: 90 x 66 x 21.6 mm
DHM-303T Contact Sensor
ƒƒ Break Distance: >28mm
ƒƒ Make Distance: <18mm
ƒƒ Transmission Range: Minimum 70 metres in free
space
ƒƒ Power: 1 x CR-123A 3V lithium battery
ƒƒ Battery Life: 3 years with alkaline battery
ƒƒ LED: Pairing/Status
ƒƒ Dimensions: 90 x 22 x 21.3 mm
DHM-304T Motion Sensor
ƒƒ Detection Coverage: 7 meters (at 20°C)
ƒƒ Detection Angle: 90 degrees
ƒƒ Transmission Range: Minimum 70 metres in free
space
ƒƒ Power: 2 x AAA batteries
ƒƒ Battery Life: 1 year with alkaline batteries
ƒƒ LED: Pairing/Status
ƒƒ Dimensions: 83 x 58 x 40.5 mm
16
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
IMPORTANT NOTE:
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are
country dependent and are firmware programmed at the factory to match the intended
destination. The firmware setting is not accessible by the end user.
-------------------------------------------------------------------------------------------------------Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Create Date                     : 2010:11:16 18:55:12+08:00
Metadata Date                   : 2010:11:25 15:05+08:00
Modify Date                     : 2010:11:25 15:05+08:00
Creator Tool                    : Adobe InDesign CS4 (6.0.5)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 6153 bytes, use -b option to extract)
Instance ID                     : uuid:f0e1aec8-d435-400b-8c07-d680e6275832
Document ID                     : xmp.did:9877F0A460EDDF118B1EF53AA0580678
Original Document ID            : adobe:docid:indd:e8799597-97a9-11de-b452-a5ac87614c5c
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:9777F0A460EDDF118B1EF53AA0580678
Derived From Document ID        : adobe:docid:indd:e8799597-97a9-11de-b452-a5ac87614c5c
Derived From Original Document ID: adobe:docid:indd:e8799597-97a9-11de-b452-a5ac87614c5c
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:066BEAC9DFE7DF11AF1FFDFC87727149, xmp.iid:076BEAC9DFE7DF11AF1FFDFC87727149, xmp.iid:0B39042BBBE8DF118AB3D60E9E9B1E25, xmp.iid:1FC3149301EBDF11A007B330234C96A6, xmp.iid:20C3149301EBDF11A007B330234C96A6, xmp.iid:21C3149301EBDF11A007B330234C96A6, xmp.iid:22C3149301EBDF11A007B330234C96A6, xmp.iid:23C3149301EBDF11A007B330234C96A6, xmp.iid:24C3149301EBDF11A007B330234C96A6, xmp.iid:25C3149301EBDF11A007B330234C96A6, xmp.iid:9CDB9AAFEEEBDF11B297EEC960806340, xmp.iid:7B55E4A670ECDF11B297EEC960806340, xmp.iid:7C55E4A670ECDF11B297EEC960806340, xmp.iid:33098C81B5ECDF11B297EEC960806340, xmp.iid:9577F0A460EDDF118B1EF53AA0580678, xmp.iid:9677F0A460EDDF118B1EF53AA0580678, xmp.iid:9777F0A460EDDF118B1EF53AA0580678, xmp.iid:9877F0A460EDDF118B1EF53AA0580678, xmp.iid:9977F0A460EDDF118B1EF53AA0580678, xmp.iid:1C58DCA829EEDF119548D0CB5E77C487, xmp.iid:1D58DCA829EEDF119548D0CB5E77C487, xmp.iid:B8CEA17462F0DF11A0DEF1ED27E0B4DD, xmp.iid:213F4F929EF0DF11A0DEF1ED27E0B4DD, xmp.iid:223F4F929EF0DF11A0DEF1ED27E0B4DD, xmp.iid:253F4F929EF0DF11A0DEF1ED27E0B4DD, xmp.iid:263F4F929EF0DF11A0DEF1ED27E0B4DD, xmp.iid:273F4F929EF0DF11A0DEF1ED27E0B4DD, xmp.iid:283F4F929EF0DF11A0DEF1ED27E0B4DD, xmp.iid:293F4F929EF0DF11A0DEF1ED27E0B4DD, xmp.iid:B2EE0E2366F1DF11A0DEF1ED27E0B4DD, xmp.iid:18EE4E406FF1DF1194CAA75FF0C2927E, xmp.iid:19EE4E406FF1DF1194CAA75FF0C2927E, xmp.iid:1E81B2C76FF1DF11AF0F9D95A5DD86DD
History When                    : 2010:11:04 14:50:19+08:00, 2010:11:04 14:50:19+08:00, 2010:11:05 18:04:29+08:00, 2010:11:08 14:29:43+08:00, 2010:11:08 14:59:53+08:00, 2010:11:08 16:04:34+08:00, 2010:11:08 16:12:36+08:00, 2010:11:08 16:28:30+08:00, 2010:11:08 16:29:42+08:00, 2010:11:08 18:35:59+08:00, 2010:11:09 18:48:25+08:00, 2010:11:10 16:32:10+08:00, 2010:11:10 16:34:03+08:00, 2010:11:10 18:30:15+08:00, 2010:11:11 14:55:18+08:00, 2010:11:11 15:01:30+08:00, 2010:11:11 15:03:40+08:00, 2010:11:11 15:03:40+08:00, 2010:11:11 16:06:16+08:00, 2010:11:12 14:54:13+08:00, 2010:11:12 15:40:08+08:00, 2010:11:15 15:30:46+08:00, 2010:11:15 17:57:39+08:00, 2010:11:15 18:16:14+08:00, 2010:11:16 16:45:24+08:00, 2010:11:16 16:45:42+08:00, 2010:11:16 16:59:34+08:00, 2010:11:16 17:03:23+08:00, 2010:11:16 17:29:24+08:00, 2010:11:16 17:46:30+08:00, 2010:11:16 18:49:56+08:00, 2010:11:16 18:50:59+08:00, 2010:11:16 18:55:03+08:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 150.00, 300.00, 150.00, 150.00, 300.00
Manifest Placed Y Resolution    : 300.00, 150.00, 300.00, 150.00, 150.00, 300.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:BA087F1A7A25DE11BC8F86500EE718D0, uuid:591B61FD62F1DF11A76298BED1AD78C9, xmp.iid:FE014F2B206DDF11B6E99BFFCCC8B33C, uuid:601B61FD62F1DF11A76298BED1AD78C9, uuid:0618BF6863F1DF11A76298BED1AD78C9, uuid:A73688F33AE5DE11B2AD86D8D0EE06BA
Manifest Reference Document ID  : uuid:B9087F1A7A25DE11BC8F86500EE718D0, uuid:D4E53C94F2C8DE118AFEDA2AB9835826, uuid:42CC5CEA12C9DE119F6BB27B4D4E45E1, uuid:DE5013E439E5DE11B2AD86D8D0EE06BA, uuid:7BE123E33AE5DE11B2AD86D8D0EE06BA, uuid:A63688F33AE5DE11B2AD86D8D0EE06BA
Doc Change Count                : 10408
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Count                      : 17
Creator                         : Adobe InDesign CS4 (6.0.5)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: KA2HM401TA1

Navigation menu