D Link HP1320A1 Wireless N Powerline Router User Manual Part 1

D Link Corporation Wireless N Powerline Router Part 1

Contents

User Manual Part 1

1D-Link DHP-1320 User ManualSection 1 - Product OverviewProduct OverviewNote: Using a power supply with a dierent voltage rating than the one included with the DHP-1320 will cause damage and void the warranty for this product.Package ContentsDHP-1320 Wireless N PowerLine RouterEthernet CableTwo Detachable AntennasPower AdapterCD-ROM with Manual and Setup Wizard
2D-Link DHP-1320 User ManualSection 1 - Product OverviewNetwork Requirements• An Ethernet-based Cable or DSL modem• IEEE 802.11n or 802.11g wireless clients• 10/100 EthernetWeb-based Conguration Utility RequirementsComputer with the following:• Windows®, Macintosh, or Linux-based operating system • An installed Ethernet adapterBrowser Requirements:• Internet Explorer 6 or higher• Firefox 3.0 or higher• Safari 3.0 or higher• Chrome 2.0 or higherWindows® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version.CD Installation Wizard RequirementsComputer with the following:• Windows® 7/ Vista® / XP with Service Pack 3• An installed Ethernet adapter• CD-ROM driveSystem Requirements
3D-Link DHP-1320 User ManualSection 1 - Product OverviewIntroductionTOTAL PERFORMANCECombines award winning router features and IEEE 802.11n/g wireless technology to provide the best wireless performance.TOTAL SECURITYThe most complete set of security features including Active Firewall and WPA/WPA2 to protect your network against outside intruders.TOTAL COVERAGEProvides greater wireless signal rates even at farther distances for best-in-class Whole Home Coverage.ULTIMATE PERFORMANCEThe D-Link Wireless N PowerLine Router (DHP-1320) is a 802.11n compliant device that delivers real world performance of up to 14x faster than an 802.11g wireless connection (also faster than a 100Mbps wired Ethernet connection). Create a secure wireless network to share photos, les, music, video, printers, and network storage throughout your home. Connect the DHP-1320 router to a cable or DSL modem and share your high-speed Internet access with everyone on the network. In addition, this Router includes a Quality of Service (QoS) engine that keeps digital phone calls (VoIP) and online gaming smooth and responsive, providing a better Internet experience.TOTAL NETWORK SECURITYThe Wireless N PowerLine Router supports all of the latest wireless security features to prevent unauthorized access, be it from over the wireless network or from the Internet. Support for WPA/WPA2 standards ensure that you’ll be able to use the best possible encryption method, regardless of your client devices. In addition, this router utilizes dual active rewalls (SPI and NAT) to prevent potential attacks from across the Internet.* Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.
4D-Link DHP-1320 User ManualSection 1 - Product Overview• Faster Wireless Networking - The DHP-1320 provides up to 300Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. The performance of this 802.11n wireless router gives you the freedom of wireless networking at speeds 650% faster than 802.11g.• Compatible with 802.11g Devices - The DHP-1320 is still fully compatible with the IEEE 802.11g standards, so it can connect with existing 802.11g PCI, USB, and Cardbus adapters.• Advanced Firewall Features - The Web-based user interface displays a number of advanced network management features including: • Content Filtering - Easily applied content ltering based on MAC Address, URL, and/or Domain Name.• Filter Scheduling - These lters can be scheduled to be active on certain days or for a duration of hours or minutes.• Secure Multiple/Concurrent Sessions - The DHP-1320 can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DHP-1320 can securely access corporate networks.• User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DHP-1320 lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company’s server. Congure your router to your specic settings within minutes.* Maximum wireless signal rate derived from IEEE Standard 802.11g, and 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.Features
5D-Link DHP-1320 User ManualSection 1 - Product OverviewHardware OverviewConnections1AP-Router Switch Two-way switch used to Select AP or Router Mode.2LAN Ports (1-3) Connect 10/100 Ethernet devices such as computers, switches, and hubs.3Internet Port The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem.4Reset Button Pressing the Reset button restores the router to its original factory default settings.5USB USB 1.1/2.0 port for SharePortTM Network and WCN support.6Power Button Use this switch to power on/power o the device.7Power Receptor Receptor for the supplied power cord.2 3 4561 7
6D-Link DHP-1320 User ManualSection 1 - Product OverviewHardware OverviewWPS Button1WPS ButtonPress the WPS button for one second to initiate the WPS process. The button will ash blue while a WPS connection is being established. The button will light solid blue for 5 seconds when the device has successfully been added to the network.2ENY Button Push this button to establish a secure PowerLine network with other PowerLine AV devices. 12
7D-Link DHP-1320 User ManualSection 1 - Product Overview1Power LED A solid green light indicates a proper connection to the power supply. This LED will light orange during a factory reset or reboot. A slow blinking orange LED indicates that the Router has crashed during bootup.2Internet LED A solid green light indicates that the internet connection has successfully completed. This LED blinks green during data transmission. A solid orange light indicates that the physical link is up, but the ISP service is down. 3WLAN LED A solid light indicates that the 2.4GHz wireless segment is ready. This LED blinks during wireless data transmission.4PowerLine AV LEDs A solid light indicates that a powerLine connection is established. The LED will blink quickly when data is transmitted to or from another PowerLine unit. 5LAN LEDs (1-3) A solid light indicates a connection to an Ethernet-enabled computer on ports 1-3. This LED blinks during data transmission.6USB LED A solid light indicated that the USB device is ready. This LED blinks during data transmission.Hardware OverviewLEDs123456
8D-Link DHP-1320 User ManualSection 2 - InstallationBefore you BeginInstallationThis section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. • Please congure the router with the computer that was last connected directly to your modem. • You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn o your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet). • If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.• When running the Setup Wizard from the D-Link CD, make sure the computer you are running the CD from is connected to the Internet and online or the wizard will not work. If you have disconnected any hardware, re-connect your computer back to the modem and make sure you are online.
9D-Link DHP-1320 User ManualSection 2 - InstallationWireless Installation ConsiderationsThe D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building Materials make a dierence. A solid metal door or aluminum studs may have a negative eect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
10D-Link DHP-1320 User ManualSection 2 - InstallationHardware Installation - For Router ModeNetwork DiagramWindows users can use the Quick Router Setup Wizard (from the CD) to congure their router. If you do not want to use the wizard, lost your CD, or are running Mac or Linux, you will need to use the manual setup procedure below. Start HereQuick Router Setup WizardFor the Wizard to work, the computer must be connected to the Internet and be online. If you have disconnected any hardware, please re-connect your computer back into the modem and make sure you are online.Insert the CD into your drive on a computer that is online and click Install Router to start the Quick Router Setup Wizard. Follow the onscreen instructions to install and congure your router. Wireless N PowerLine Router (DHP-1320)Modem5V- - - 3A1 2 LAN 3 4 INTERNET USBRESETINTERNET1 2 3INTERNETLANAR RTUSBRESET ON/OFF AC IN1 2 3INTERNETLANAR RTUSBRESET ON/OFF AC ININTERNETPC
11D-Link DHP-1320 User ManualSection 2 - InstallationIf you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:1. Place the router in an open and central location. Do not plug the power adapter into the router.2. Unplug the modem’s power adapter. 3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the Internet port on the router.4. Plug an Ethernet cable into one of the three LAN ports on the router. Plug the other end into the Ethernet port on your computer.5. Plug the power adapter back to the modem. Wait for the modem to boot (about 30 seconds).6. Plug the power cord to the router and connect to an outlet. 7. Turn on the DHP-1320 Router by pushing the power button located on the back of this unit. Then, wait about 30 seconds for the router to boot.8. Open a web browser, enter http://192.168.0.1 (or http://dlinkrouter) and then press Enter. When the login window appears, set the user name to Admin and leave the password box blank. Click Log In to continue the setup and use the wizard. Please refer to the page 22 for detailed installation information and advanced features.Connect to Cable/DSL/Satellite Modem
12D-Link DHP-1320 User ManualSection 2 - InstallationIf you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have to do the following before connecting the router to your network:• Disable UPnP™• Disable DHCP• Change the LAN IP address to an available address on your network. The LAN ports on the router cannot accept a DHCP address from your other router.To connect to another router, please follow the steps below:1. Plug the power into the router and use the power switch to power up the router. Connect one of your computers to the router (LAN port) using an Ethernet cable. Make sure your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the Networking Basics section for more information. If you need to change the settings, write down your existing settings before making any changes. In most cases, your computer should be set to receive an IP address automatically in which case you will not have to do anything to your computer.2. Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user name to Admin and leave the password box empty. Click Log In to continue.3. Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settings to continue. 4. Click Setup and then click Network Settings. Uncheck the Enable DHCP Server checkbox. Click Save Settings to continue.5. Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save Settings to save your settings. Use this new IP address to access the conguration utility of the router in the future. Close the browser and change your computer’s IP settings back to the original values as in Step 1.Connect to Another Router
13D-Link DHP-1320 User ManualSection 2 - Installation6. Disconnect the Ethernet cable from the router and reconnect your computer to your network. 7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug anything into the Internet (WAN) port of the D-Link router. 8. You may now use the other 2 LAN ports to connect other Ethernet devices and computers. To congure your wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the Conguration and Wireless Security sections for more information on setting up your wireless network.
14D-Link DHP-1320 User ManualSection 2 - InstallationHardware Installation - For Access Point Mode5V- - - 3A1 2 LAN 3 4 INTERNET USBRESETINTERNET1 2 3INTERNETLANAR RTUSBRESET ON/OFF AC IN1 2 3INTERNETLANAR RTUSBRESET ON/OFF AC ININTERNETDHP-306AVWireless RouterModemWireless N PowerLine Router (AP Mode) DHP-306AVStep 2Turn on the DHP-1320 by pushing the power button located on the back of this unit. Connect one end of the included Ethernet cable to the Ethernet port on the DHP-1320 and attach the other end of the Ethernet cable to the PC as illustrated in Room 3.Note: Connection to an Ethernet-enabled device is conrmed when the green LED Ethernet indicator on the PowerLine device is illuminated. Step 3Open a web browser, enter http://192.168.0.1 and press Enter. When the login window appears, set the user name to Admin and leave the password box blank. Click Log In to continue the setup. Please refer to the user to page 108 for more detailed installation information and advanced features.Step 1Move the switch on the back of the DHP-1320 to “AP”. Connect the supplied power cord into the power receptor located on the back of the DHP-1320 and plug into a power outlet as illustrated in Room 3. Note: To secure the PowerLine Network from unauthorize users, please refer to the PowerLine Network Security section.Note: Power source is conrmed when the green LED Power Indicator on the PowerLine devices is illuminated. Room 2 Room 1Room3
15D-Link DHP-1320 User ManualSection 1 - Product OverviewPowerLine Installation ConsiderationsPlan the location of your PowerLine devices:1. Connect the PowerLine devices to electrial outlets that are not controlled by a wall switch in order to avoid accidentally turning o the power to the device.2. Do not connect the Wireless N PowerLine Router to an extension cord, surge protector, or power strip. This might prevent the device from working correctly or it may reduce the network performance. 3. Avoid using the Wireless N PowerLine Router in an electrical outlet that is located near an appliance that uses a lot of power, such as a washer, dryer or refrigerator. This may prevent the adapter from working correctly, or may negatively impact the network perfomance.4. Verify that your PowerLine devices are electrically rated to operate with the power available in your location. 5. To help prevent against electrical shock, be sure to plug the power cables into properly grounded electrical outlets.
16D-Link DHP-1320 User ManualSection 1 - Product OverviewPowerLine SecurityIt is strongly recommended to encrypt your PowerLine network. By encrypting the data that is sent via your PowerLine adapters, you will prevent nearby hackers with a Powerline adapter to connect to your network and steal your information.To encrypt your PowerLine network, follow the steps below:PowerLine Network-Quick SetupThe ENY Button is used to add a PowerLine AV device to a PowerLine network. You can allow the DHP-1320 to join a network by pressing the ENY Button to toggle it to the Broadcast state or Join state.The ENY Button has 3 dierent trigger states: Broadcast state- Enables the DHP-1320 to provide information for another PowerLine AV device to join its PowerLine network (works even if it is the only device existing within the network group). The rst PowerLine device will use this state when the ENY Button is pressed. Join State - This allows an ungrouped PowerLine AV device to join an existing PowerLine network. PowerLine devices added after the rst device will be in the Join State when the ENY Button is pressed. Ungroup State - Hold down the ENY Button for more than 10 seconds to detach the device from its network group. Encryption Button Usage
17D-Link DHP-1320 User ManualSection 1 - Product OverviewConguring a PowerLine NetworkConnecting two PowerLine AV devices for the rst timeTo initially connect the DHP-1320 AV to another PowerLine AV device and create a network:1. Plug the DHP-1320 into a power outlet. Press the ENY button for 1 to 3 seconds. The PowerLine AV LED should start to blink.2. Plug the other PowerLine device (e.g. the DHP-W306AV) into a power outlet. Press the ENY button on this PowerLine device for 1 to 3 seconds. 3. Wait for both devices to reboot (all LEDs will turn o and on). When the PowerLine AV LEDs on both devices are steadily lit, the two devices will be networked together. INTERNET1 2 3INTERNETLANAR RTUSBRESET ON/OFF AC ININTERNET1 2 3INTERNETLANAR RTUSBRESET ON/OFF AC INRoom BRoom ARoom CDHP-W306AVDHP-W306AVDHP-1320
18D-Link DHP-1320 User ManualSection 1 - Product OverviewConnecting a PowerLine AV device to an existing PowerLine networkTo add a DHP-1320 if you already have an existing network with 2 more PowerLine devices:1. Press the ENY button on the DHP-1320 for more than 10 seconds to make sure it is not connected to any other PowerLine network.2. Press the ENY button of any device already in your PowerLine network (e.g. the DHP-306AV) for 1 to 3 seconds. The ENY LED should start to blink.3. Press the ENY button on the DHP-1320 for 1 to 3 seconds. The PowerLine AV LED should start to blink.4. Wait for the DHP-1320 to reboot (all LEDs will tun o and on). When the PowerLine AV LED on all devices are steadily lit, the DHP-1320 will be connected to the existing network. Room BRoom ARoom CDHP-W306AVDHP-1320DHP-306AV
19D-Link DHP-1320 User ManualSection 2 - InstallationThe DHP-1320 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Insert the Quick Router Setup Wizard CD in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows® XP. The steps and screens are similar for the other Windows operating systems.If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type“D:\autorun.exe” (where D: represents the drive letter of your CD-ROM drive).When the autorun screen appears, click Install.Getting StartedNote: It is recommended to write down the SSID and Security Key, followed by the login password on the provided CD holder.
20D-Link DHP-1320 User ManualSection 3 - CongurationConguration (Router Mode)This section will show you how to congure your new D-Link wireless router using the web-based conguration utility.Web-based Conguration UtilityTo access the conguration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1).Select Admin in the User Name eld. Leave the password blank by default. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.
21D-Link DHP-1320 User ManualSection 3 - CongurationInternetSetupThis section allows you to congure your Router’s Internet settings.The Internet Connection Setup Wizard provides a quick method for conguring your Internet settings. To start the Internet Connection Setup Wizard, click the Internet Connection Setup Wizard button. Refer to “Internet Connection Setup Wizard” on page 22 for more information on how to use the Internet Connection Setup Wizard.Click the Manual Internet Connection Setup button if you want to enter your Internet settings without running the Internet Connection Setup Wizard. Refer to “Manual Internet Connection Setup” on page 28 for more information on how to congure your Internet settings manually.Internet Connection Setup Wizard:Manual Internet Connection Option:
22D-Link DHP-1320 User ManualSection 3 - CongurationInternet Connection Setup WizardClick the Internet Connection Setup Wizard button to start the Internet Connection Setup Wizard.
23D-Link DHP-1320 User ManualSection 3 - CongurationCreate a new password and then click Next to continue.The following window appears, summarizing the steps required to complete the Internet Connection Setup Wizard:Click Next to continue.Select your time zone from the drop-down menu and then click Next to continue.
24D-Link DHP-1320 User ManualSection 3 - CongurationSelect the type of Internet connection you use and then click Next to continue.If you selected DHCP Connection (Dynamic IP Address), you may need to enter the MAC address of the computer that was last connected directly to your modem. If you are currently using that computer, click Clone Your PC’s MAC Address and then click Next to continue.The Host Name is optional but may be required by some ISPs. The default host name is the device name of the router and may be changed.
25D-Link DHP-1320 User ManualSection 3 - CongurationIf you selected PPPoE, enter your PPPoE username and password. If your ISP requires you to enter a PPPoE service name, enter the service name in the Service Name eld.Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.Click Next to continue.Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.If you selected PPTP, enter your PPTP username and password. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and PPTP server addresses.Click Next to continue.
26D-Link DHP-1320 User ManualSection 3 - CongurationIf you selected L2TP, enter your L2TP username and password. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and L2TP server addresses.Click Next to continue.If you selected Static, enter your network settings supplied by your Internet provider. Click Next to continue.
27D-Link DHP-1320 User ManualSection 3 - CongurationClick Connect to save your settings. The following window appears to indicate that the settings are being saved. When the Router has nished saving all the changes, the Setup> Internet window will open.Close your browser window and reopen it to test your Internet connection. It may take a few tries to initially connect to the Internet.
28D-Link DHP-1320 User ManualSection 3 - CongurationManual Internet Connection SetupUse the My Internet Connection is drop-down menu to select the mode that the router should use to connect to the Internet.Advanced Domain Name System (DNS) Services enhances your Internet performance by getting you the information and web pages you are looking for faster and more reliably. In addition, it improves your overall Internet experience by correcting many common typo mistakes automatically, taking you where you intended to go and saving you valuable time. Disclaimer: D-Link makes no warranty as to the availability, reliability, fuctionality and operation of the Advanced DNS service or its features. Internet Connection Type:Advanced DNS Service:
29D-Link DHP-1320 User ManualSection 3 - CongurationEnter the IP address assigned by your ISP.Enter the Subnet Mask assigned by your ISP.Enter the Gateway assigned by your ISP.The DNS server information will be supplied by your ISP (Internet Service Provider).Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1500 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.IP Address:Subnet Mask:Default Gateway:DNS Servers:MTU:MAC Address:Manual Internet Connection SetupStatic IPSelect Static IP from the drop-down menu if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the elds must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.Click the Save Settings button to save any changes made.
30D-Link DHP-1320 User ManualSection 3 - CongurationThe Host Name is optional but may be required by some ISPs. Leave blank if you are not sure.Enter the Primary and Secondary DNS server IP addresses assigned by your ISP. These addresses are usually obtained automatically from your ISP. Enter the value 0.0.0.0 if you did not specically receive these from your ISP.Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1500 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.Manual Internet Connection SetupDynamic IP (DHCP)Select Dynamic IP (DHCP) from the drop-down menu to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for cable modem services such as Comcast and Cox.Host Name:Primary/Secondary DNS Server:MTU:MAC Address:Click the Save Settings button to save any changes made.
31D-Link DHP-1320 User ManualSection 3 - CongurationSelect Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.Enter the IP address (Static PPPoE only).Enter your PPPoE user name.Enter your PPPoE password and then retype the password in the next box.Enter the ISP Service Name (optional).Use the radio buttons to specify the reconnect mode. The user can specify a custom schedule or specify the On Demand, or Manual option.Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only).Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1492 is the default MTU.Address Mode:IP Address:User Name:Password:Service Name:Reconnect Mode:Maximum Idle Time:DNS Servers:MTU:Manual Internet Connection SetupPPPoE (Username/Password)Select PPPoE (Username/Password) from the drop-down menu if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.
32D-Link DHP-1320 User ManualSection 3 - CongurationThe default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.MAC Address:Click the Save Settings button to save any changes made.
33D-Link DHP-1320 User ManualSection 3 - CongurationSelect Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP.Enter the IP address (Static PPTP only).Enter the Primary and Secondary DNS Server Addresses (Static PPTP only).Enter the Gateway IP Address provided by your ISP.Enter the Server IP provided by your ISP (optional).Enter your PPTP username.Enter your PPTP password and then retype the password in the next box.Use the radio buttons to specify the reconnect mode. The user can specify a custom schedule or specify the On Demand, or Manual option.Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.The DNS server information will be supplied by your ISP (Internet Service Provider).Address Mode:PPTP IP Address:PPTP Subnet Mask:PPTP Gateway IP Address:PPTP Server IP Address:Manual Internet Connection SetupPPTPUsername:Password: Reconnect Mode:Maximum Idle Time:DNS Servers:Select PPTP (Point-to-Point Tunneling Protocol) from the drop-down menu if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services.
34D-Link DHP-1320 User ManualSection 3 - CongurationMaximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1454 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.MTU:MAC Address:Click the Save Settings button to save any changes made.
35D-Link DHP-1320 User ManualSection 3 - CongurationSelect Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.Enter the L2TP IP address supplied by your ISP (Static only).Enter the Subnet Mask supplied by your ISP (Static only).Enter the Gateway IP Address provided by your ISP.Enter the Server IP provided by your ISP (optional).Enter your L2TP username.Enter your L2TP password and then retype the password in the next box.Use the radio buttons to specify the reconnect mode. The user can specify a custom schedule or specify the On Demand, or Manual option.Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.Enter the Primary DNS server IP address assigned by your ISP. These address is usually obtained automatically from your ISP. Enter the value 0.0.0.0 if you did not specically receive these from your ISP.Address Mode:L2TP IP Address:L2TP Subnet Mask:Manual Internet Connection SetupL2TPChoose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. L2TP Gateway IP Address:L2TP Server IP Address:Username:Password:Reconnect Mode:Maximum Idle Time:Primary DNS Server:
36D-Link DHP-1320 User ManualSection 3 - CongurationMTU:MAC Address:Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1454 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
37D-Link DHP-1320 User ManualSection 3 - CongurationWireless SettingsIf you want to congure the wireless settings on your router using the wizard, click Wireless Connection Setup Wizard and refer to “Wireless Connection Setup Wizard” on page 103.Click Add Wireless Device with WPS if you want to add a wireless device using Wi-Fi Protected Setup (WPS) and refer to “Add Wireless Device with WPS Wizard” on page 106.If you want to manually congure the wireless settings on your router click Manual Wireless Connection Setup and refer to the next page.
38D-Link DHP-1320 User ManualSection 3 - CongurationCheck the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions.Select the time frame that you would like your wireless network enabled. The schedule may be set to Always. Any schedule you create will be available in the drop-down menu. Click New Schedule to create a new schedule.The Service Set Identier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The SSID is case-sensitive.Select one of the following:802.11g Only - Select if all of your wireless clients are802.11g.802.11n Only - Select only if all of your wireless clients are802.11n.802.11b Only - Select if all of your wireless clients are 802.11b.Mixed 802.11n and 802.11g - Select if you are using a mixof 802.11n and 802.11g wireless clients.Mixed 802.11g and 802.11b - Select if you are using a mix of 802.11g and 802.11b wireless clients. Mixed 802.11n, 802.11g and 802.11b - Select 802.11n, 802.11g and 802.11bThe Auto Channel Selection setting can be selected to allow the DHP-1320 to choose the channel with the least amount of interference.Indicates the channel setting for the DHP-1320. By default the channel is set to 1. The Channel can be changed to t the channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Selection, this option will be greyed out.Enable Wireless:Schedule:Wireless Network Name:802.11 Mode:Enable Auto Channel Selection:Wireless Channel:Manual Wireless Settings802.11n/b/g (2.4GHz)
39D-Link DHP-1320 User ManualSection 3 - CongurationChannel Width:Wireless Security Mode:Click the Save Settings button to save any changes made.Select the Channel Width:Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting.Refer to “Wireless Security” on page 136 for more information regarding wireless security.
40D-Link DHP-1320 User ManualSection 3 - CongurationThis section will allow you to change the local network settings of the router and to congure the DHCP settings.Network SettingsUse this section to congure the Router’s local network settings.Use this section to congure the DHP-1320’s built-in DHCP server settings.Use this section to create a new DHCP reservation or manage existing DHCP reservations.Displays information about the devices that have a DHCP reservation from the DHP-1320. The information includes the Host Name, IP Address, MAC Address, and Expiration Time.Displays information about the devices that have a dynamic DHCP lease from the DHP-1320. The information includes the Host Name, IP Address, MAC Address, and Lease Expiration Time.Router Settings:DHCP Server Settings:Add DHCP Reservation:DHCP Reservations List:Number of Dynamic DHCP Clients:
41D-Link DHP-1320 User ManualSection 3 - CongurationNetwork SettingsEnter the IP address of the router. The default IP address is 192.168.0.1.If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to get back into the conguration utility.Enter the Subnet Mask. The default subnet mask is 255.255.255.0.Enter a Host Name to identify the DHP-1320.Enter the Domain name (Optional).Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server.Router IP Address:Default Subnet Mask:Device Name:Local Domain:Enable DNS Relay:Router SettingsClick the Save Settings button to save any changes made.
42D-Link DHP-1320 User ManualSection 3 - CongurationDHCP stands for Dynamic Host Control Protocol. The DHP-1320 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DHP-1320. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.Check this box to enable the DHCP server on your router. Uncheck to disable this function.Enter the starting and ending IP addresses for the DHCP server’s IP assignment.Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conict. The length of time for the IP address lease. Enter the Lease time in minutes.If NetBIOS advertisement is switched on, switching this setting on causes WINS information to be learned from the WAN side, if available. Turn this setting o to congure manually.This is an advance setting and is normally left blank. This allows the conguration of NetBIOS domain name under which network hosts operate. This setting has no eect if the “ Learn NetBIOS information form WAN is activated.Enable DHCP Server:DHCP IP Address Range:DHCP Lease Time:Learn NetBIOSWAN:NetBIOS scope:Network SettingsDHCP Server SettingsWhen you have nished conguring the new DHCP Server Settings, click the Save Settings button at the top or bottom of the window.
43D-Link DHP-1320 User ManualSection 3 - CongurationIf you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within the DHCP IP Address Range.Check this box to enable the reservation.Enter the computer name. Alternatively, select a computer that currently has a DHCP lease from the drop down menu and click << to automatically populate the Computer Name, IP Address, and MAC Address elds.Enter the IP address you want to assign to the computer or device. This IP Address must be within the DHCP IP Address Range.Enter the MAC address of the computer or device.If you want to assign an IP address to the computer you are currently on, click this button to populate the elds. Click Save to save your entry. You must click Save Settings at the top to activate your reservations. In this section you can see what LAN devices are currently leasing IP addresses.Enable:Computer Name:IP Address:MAC Address:Copy Your PC’sMAC Address:Save:Dynamic DHCPClients:Network SettingsDHCP ReservationWhen you have nished conguring the new DHCP Reservation, click the Save Settings button at the top or bottom of the window to activate your reservations.
44D-Link DHP-1320 User ManualSection 3 - CongurationUSB Settings In this section you may congure your USB port. You can select several congurations to choose from such as Share Port and WCN Conguration.
45D-Link DHP-1320 User ManualSection 3 - CongurationThis section will show you how to congure your new D-Link PowerLine AV using the web-based conguration utility.PLC Settings (Router Mode)
46D-Link DHP-1320 User ManualSection 3 - CongurationNetwork Name:Public Network Name:Private Network Name:Scan:Add Memeber:Device Name:Password:You can set the name of your network and to make it either public or private. Make sure the Network Name of all of the devices within your PowerLine network is the same.Select this option if you would like to make your powerline network public with the default Network Name of “HomePlugAV”. Since this is a commonly used Network Name, it is less secure than a private Network Name. Select this option if you wish to make your powerline network more secure by using a private Network Name. Type the name of your private PowerLine network in the eld.Scan for new PowerLine devices. This section lets you add new PowerLine AV devices to your PowerLine network. To add a new device, give it a Device Name and enter its Password, then click Add. When you add a device it is given the current Network Name.Type a name you wish to use to identify a specific PowerLine AV device. For example, “Jack’s room”.The Password is used to verify that you are authorized to perform changes on a device. You cannd the Password printed on the back of your device.
47D-Link DHP-1320 User ManualSection 3 - CongurationMember List:Link Rate:This section provides information on the PowerLine AV devices in your PowerLine network, or any devices that were previously connected but it are currently disconnected.Displays the device’s current data rate in Mbps. Status:Qos Settings:Mac Address:This field shows the status of the device. If the field displays the word Connect, then the device is connected to your PowerLine network. If the eld displays the word Disconnect, then the device has been added to the network but it is not ready. Please check its password and make sure the device ispowered on.You can congure your PowerLine AV devices to give priority to powerline network trac accordingly. Enter the name, MAC Address, and priority level.You can nd the MAC address printed on the back of your device.
48D-Link DHP-1320 User ManualSection 3 - CongurationThe DHP-1320 can be congured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DHP-1320 rewall feature lters out unrecognized packets to protect your LAN network so all computers networked with the DHP-1320 are invisible to the outside world. If you wish, you can make some of the LAN computers accessible from the Internet by enabling Virtual Server. Depending on the requested service, the DHP-1320 redirects the external service request to the appropriate server within the LAN network. The DHP-1320 is also capable of port-redirection, meaning that incoming trac to a particular port may be redirected to a dierent port on the server computer.For a list of ports for common applications, please visit http://support.dlink.com/faq.Virtual ServerAdvanced
49D-Link DHP-1320 User ManualSection 3 - CongurationThe Virtual Server window allows you to open a single port. If you would like to open a range of ports, refer to the next page.Check the box on the left side to enable the Virtual Server rule.Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the elds.Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the Computer Name drop-down menu. Select your computer and click <<. Enter the port that you want to open next to Public Port and Private Port. The public and private ports are usually the same. The public port is the port seen from the Internet side, and the private port is the port being used by the application on the computer within your local network.Select TCP, UDP, Both or other from the Protocol drop-down menu.Use the drop-down menu to schedule the time that the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section.Select Allow All (most common) or a created Inbound lter. You may create your own inbound lters in the Advanced > Inbound Filter page.Enable Checkbox:Name:IP Address:Public Port/Private Port:Trac Type:Schedule Drop-Down Menu:Inbound Filter:Click the Save Settings button to save any changes made.
50D-Link DHP-1320 User ManualSection 3 - CongurationThis will allow you to open a single port or a range of ports.Port ForwardingTick the checkbox on the left side to enable the Port Forwarding rule.Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the elds.Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the Computer Name drop-down menu. Select your computer and click <<. Enter the port that you want to open next to TCP Port and UDP Port. Use the drop-down menu to schedule the time that the Port Forwarding rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section.Select Allow All (most common) or a created Inbound lter. You may create your own inbound lters in the Advanced > Inbound Filter page.Enable Checkbox:Name:IP Address:TCP Port/UDP Port:Schedule:Inbound Filter:Click the Save Settings button to save any changes made.
51D-Link DHP-1320 User ManualSection 3 - CongurationCheck the box on the left side to enable the Application Rule.Enter a name for the rule. You may select a pre-dened application from the Application drop-down menu and click <<.This is the port used to trigger the application. It can be either a single port or a range of ports.Select the protocol of the trigger port (TCP, UDP, or Any).This is the port number on the Internet side that will be used to access the application. You may dene a single port or a range of ports. You can use a comma to add multiple ports or port ranges.Select the protocol of the rewall port (TCP or UDP).The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section.Enable Checkbox:Name:Trigger:Trac Type:Firewall:Trac Type:Schedule:Application RulesSome applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have diculties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DHP-1320. If you need to run applications that require multiple connections, specify the port normally associated with an application in the “Trigger Port” eld, select the protocol type as TCP or UDP, then enter the rewall (public) ports associated with the trigger port to open them for inbound trac.Click the Save Settings button to save any changes made.
52D-Link DHP-1320 User ManualSection 3 - CongurationQoS EngineThis option is disabled by default. Enable this option for better performance and experience with online games and other interactive applications, such as VoIP.This option is enabled by default when the QoS Engine option is enabled. This option will allow your router to automatically determine the uplink speed of your Internet connection.This displays the detected uplink speed.The speed at which data can be transferred from the router to your ISP. This is determined by your ISP. ISP’s often dene speed as a download/upload pair. For example, 1.5Mbits/284Kbits. Using this example, you would enter 284. Alternatively you can test your uplink speed with a service such as www.dslreports.com.Enable Trac Shapping:Automatic Uplink Speed:Measured Uplink Speed:Manual Uplink Speed:The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are disabled and application priority is not classied automatically.Click the Save Settings button to save any changes made.
53D-Link DHP-1320 User ManualSection 3 - CongurationNetwork FilterSelect Turn MAC Filtering OFF, Turn MAC Filtering ON and ALLOW computers listed to access the network, or Turn MAC Filtering ON and DENY computers listed to access the network from the drop-down menu. Enter the MAC address you would like to lter.To nd the MAC address on a computer, please refer to the Networking Basics section in this manual. Select a DHCP client from the Computer Name dropdown menu and click << to copy that MAC Address.Congure MAC Filtering:MAC Address:DHCP Client List:Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router.Click the Save Settings button to save any changes made.
54D-Link DHP-1320 User ManualSection 3 - CongurationAccess ControlCheck the Enable Access Control check box and click the Add Policy button to start the Access Control Wizard. Add Policy:The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls to only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like P2P utilities or games.Click Next to continue with the wizard.Access Control Wizard
55D-Link DHP-1320 User ManualSection 3 - CongurationEnter a name for the policy and then click Next to continue.Select a schedule (I.E. Always) from the drop-down menu and then click Next to continue.Enter the following information and then click Next to continue.• Address Type - Select IP address, MAC address, or Other Machines.• IP Address - Enter the IP address of the computer you want to apply the rule to.
56D-Link DHP-1320 User ManualSection 3 - CongurationSelect the ltering method and then click Next to continue.Enter the rule: Enable - Check to enable the rule. Name - Enter a name for your rule. Dest IP Start - Enter the starting IP address. Dest IP End - Enter the ending IP address. Protocol - Select the protocol. Dest Port Start - Enter the starting port number. Dest Port End - Enter the ending port number.To enable web logging, click Enable.Click Save to save the access control rule.
57D-Link DHP-1320 User ManualSection 3 - CongurationCongure Web Filtering:Website URL:Website FilterSelect ALLOW computers access to ONLY these sites, or DENY computers access to ONLY these sites from the drop-down menu. Enter the keywords or URLs that you want to allow or block. Website Filters are used to allow you to set up a list of Web sites that can be viewed by multiple users through the network. To use this feature select the appropriate Web Filtering option, enter the domain or website, and click Save Settings.Click the Save Settings button to save any changes made.
58D-Link DHP-1320 User ManualSection 3 - CongurationInbound FilterEnter a name for the inbound lter rule.Select Allow or Deny.Check to enable rule.Enter the starting IP address. Enter 0.0.0.0 if you do not want to specify an IP range.Enter the ending IP address. Enter 255.255.255.255 if you do not want to specify and IP range.Click the Add button to apply your settings. Name:Action:Enable:Remote IP Start:Remote IP End:Add:The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can congure inbound data ltering rules that control data based on an IP address range. Inbound Filters can be used with Virtual Server, Port Forwarding, or Remote Administration features.
59D-Link DHP-1320 User ManualSection 3 - CongurationCheck the Enable SPI box to enable the SPI (Stateful Packet Inspection, also known as dynamic packet ltering) feature. Enabling SPI helps to prevent cyber attacks by tracking more state per session. It validates that the trac passing through the session conforms to the protocol.Select one of the following for TCP and UDP ports:Endpoint Independent - Any incoming trac sent to an open port will be forwarded to the application that opened the port. The port will close if idle for 5 minutes.Address Restricted - Incoming trac must match the IP address of the outgoing connection.Address + Port Restriction - Incoming trac must match the IP address and port of the outgoing connection.Enable this option to provide protection from certain kinds of “spoong” attacks.Firewall Settings:NAT Endpoint Filtering:Enable Anti-Spoof Checking:Firewall SettingsA rewall protects your network from the outside world. The DHP-1320 oers a rewall type functionality. The SPI feature helps prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain types of applications. If you choose to expose a computer, you can enable DMZ. DMZ is short for Demilitarized Zone. This option will expose the chosen computer completely to the outside world.
60D-Link DHP-1320 User ManualSection 3 - Conguration1. Check the Enable DMZ box.2. Specify the IP address of the computer on the LAN that you want to have unrestricted Internet communication in the DMZ IP address eld. To specify an existing DHCP client, use the Computer Name drop-down to select the computer that you want to make a DMZ host. If selecting a computer that is a DHCP client, be sure to make a static reservation in the Setup > Network Settings page so that the IP address of the DMZ machine does not change.3. Click the Save Settings button to add the new DMZ host. DMZ Host:IP Address: Specify the IP address of the computer on the LAN that you want to have unrestricted Internet communication. If this computer obtains its IP address automatically using DHCP, be sure to make a static reservation on the System > Network Settings page so that the IP address of the DMZ machine does not change.If an application has trouble working from behind the router, you can expose one computer to the Internet and run the application on that computer.Carry out the following to create a DMZ host:
61D-Link DHP-1320 User ManualSection 3 - CongurationRoutingThe Routing option is an advanced method of customizing specic routes of data through your network.Click the Save Settings button to save any changes made.Routing List:Name:Interface:Destination IP:Netmask:Gateway:Each Route has a checkbox next to it, check the box of the route you wish to enable. Specify a name for identication of this route.Select the interface which the IP packet must use to transit out of the router when this route is used.Enter the address of the host or network you wish to access.This eld identies the portion of the destination IP in use. The IP address of the router will be displayed here.
62D-Link DHP-1320 User ManualSection 3 - CongurationSet the transmit power of the antennas.Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended. This value should remain at its default setting of 2346. If inconsistent data flow is a problem, only a minor modication should be made.(Delivery Trac Indication Message) 1 is the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages.This enables 802.11d operation. 802.11d is a wireless specication developed to allow implementation of wireless networks in countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients.Transmit Power:Beacon Period:RTS Threshold:DTIM Interval:WLAN Partition:WMM Enable:Advanced Wireless Settings802.11n/b/g (2.4GHz)Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may create higher data loss. Short Guard Interval:Click the Save Settings button to save any changes made.
63D-Link DHP-1320 User ManualSection 3 - CongurationWi-Fi Protected Setup (WPS)Enable the Wi-Fi Protected Setup feature. A PIN is a unique number that can be used to add the router to an existing network or to create a new network. The default PIN may be printed on the bottom of the router. For extra security, a new PIN can be generated. You can restore the default PIN at any time. Only the Administrator (“admin” account) can change or reset the PIN. Shows the current value of the router’s PIN. Click this button to restore the default PIN of the router. Click this button to create a random number that is a valid PIN. This becomes the router’s PIN. You can then copy this PIN to the user interface of the registrar.Enable:PIN Settings: PIN:Reset PIN to Default:Generate New PIN:Wi-Fi Protected Setup (WPS) System is a simplied method for securing your wireless network during the “Initial setup” as well as the “Add New Device” processes. The Wi-Fi Alliance (WFA) has certied it across dierent products as well as manufactures. The process is just as easy, as depressing a button for the Push-Button Method or correctly entering the 8-digit code for the Pin-Code Method. The time reduction in setup and ease of use are quite benecial, while the highest wireless Security setting of WPA2 is automatically used.
64D-Link DHP-1320 User ManualSection 3 - CongurationClick the Add Wireless Device with WPS button to start Wireless Connection Setup Wizard. This wizard helps you add wireless devices to the wireless network.The wizard will either display the wireless network settings to guide you through manual conguration, prompt you to enter the PIN for the device, or ask you to press the conguration button on the device. If the device supports Wi-Fi Protected Setup and has a conguration button, you can add it to the network by pressing the conguration button on the device and then the on the router within 60 seconds. The status LED on the router will ash three times if the device has been successfully added to the network.There are several ways to add a wireless device to your network. A “registrar” controls access to the wireless network. A registrar only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as well.Add Wireless Station:Click the Save Settings button to save any changes made.
65D-Link DHP-1320 User ManualSection 3 - CongurationUPnPInternet Ping BlockInternet Port SpeedMulticast StreamsTo use the Universal Plug and Play (UPnP™) feature click on Enabled. UPNP provides compatibility with networking equipment, software and peripherals.Unchecking the box will not allow the DHP-1320 to respond to pings. Blocking the Ping may provide some extra security from hackers. Check the box to allow the Internet port to be “pinged”.You may set the port speed of the Internet port to 10Mbps, 100Mbps, or auto. Some older cable or DSL modems may require you to set the port speed to 10Mbps.Check the Enable Multicast Streams box to allow multicast trac to pass through the router from the Internet.Enable UPnP:Enable WAN Ping Response:WAN Port Speed:Enable Multicast Streams:Advanced NetworkClick the Save Settings button to save any changes made.
66D-Link DHP-1320 User ManualSection 3 - CongurationIPv6Use the drop-down menu to select the IPv6 Internet Connection mode. My IPv6 Connection is:Use the IPv6 window to congure the mode that the Router will use to access an IPv6 Internet connection.
67D-Link DHP-1320 User ManualSection 3 - CongurationIPv6Static IPv6Select Static IPv6 from the My IPv6 Connection is drop-down menu if your Router will use a static IPv6 address to connect to the Internet.Enter the address settings supplied by your Internet provider (ISP). Enter the LAN (local) IPv6 address for the router. Use this section to congure the IPv6 autoconguration settings.WAN IPv6 Address Settings:LAN IPv6 Address:LAN Address Autoconguration Settings:Click the Save Settings button to save any changes made.
68D-Link DHP-1320 User ManualSection 3 - CongurationIPv6Static IPv6 - StatelessTo congure the Router to use a Static IPv6 Stateless connection, congure the parameters in the LAN Address Autoconguration Settings section as described below:Check to enable the Autoconguration feature.Select the Stateless option from the drop-down menu.Enter the Router Advertisement Lifetime (in minutes).Enable automatic IPV6 address assignment:Autoconguration Type:Router Advertisement Lifetime:Click the Save Settings button to save any changes made.
69D-Link DHP-1320 User ManualSection 3 - CongurationIPv6Static IPv6 - StatefulTo congure the Router to use a Static IPv6 Stateful connection, congure the parameters in the LAN Address Autoconguration Settings section as described below:Check to enable the Autoconguration feature.Select the Stateful(DHCPv6) option from the drop-down menu.Enter the start IPv6 Address for the DHCPv6 range for your local computers.Enter the end IPv6 Address for the DHCPv6 range for your local computers.Enter the IPv6 Address Lifetime (in minutes).Enable Autoconguration:Autoconguration Type:IPv6 Address Range Start:IPv6 Address Range End:IPv6 Address Lifetime:Click the Save Settings button to save any changes made.
70D-Link DHP-1320 User ManualSection 3 - CongurationIPv6Autoconguration (Stateless/DHCPv6)Select Static IPv6 from the My IPv6 Connection is drop-down menu if your Router will use a static IPv6 address to connect to the Internet.Select Obtain DNS Server address automatically or enter a specic DNS server address. Enter the LAN (local) IPv6 address for the router. Displays the Router’s LAN Link-Local Address.Use this section to congure the IPv6 autoconguration settings.IPv6 DNS Settings:LAN IPv6 Address Settings:LAN IPv6 Link-Local Address:Address Autoconguration Settings:Click the Save Settings button to save any changes made.
71D-Link DHP-1320 User ManualSection 3 - CongurationIPv6Autoconguration (Stateless/DHCPv6) - StatelessTo congure the Router to use a Static IPv6 Stateless connection, congure the parameters in the LAN Address Autoconguration Settings section as described below:Check to enable the Autoconguration feature.Select the Stateless option from the drop-down menu.Enter the Router Advertisement Lifetime (in minutes).Enable automatic IPv6 address assignment:Autoconguration Type:Router Advertisement Lifetime:Click the Save Settings button to save any changes made.
72D-Link DHP-1320 User ManualSection 3 - CongurationIPv6Autoconguration (Stateless/DHCPv6) - StatefulTo congure the Router to use a Static IPv6 Stateful connection, congure the parameters in the LAN Address Autoconguration Settings section as described below:Check to enable the Autoconguration feature.Select the Stateful(DHCPv6) option from the drop-down menu.Enter the start IPv6 Address for the DHCPv6 range for your local computers.Enter the end IPv6 Address for the DHCPv6 range for your local computers.Enter the IPv6 Address Lifetime (in minutes).Enable automatic IPv6 address assignment:Autoconguration Type:IPv6 Address Range Start:IPv6 Address Range End:IPv6 Address Lifetime:Click the Save Settings button to save any changes made.
73D-Link DHP-1320 User ManualSection 3 - CongurationIPv66to4 Select 6to4 from the My IPv6 Connection is drop-down menu if your Router will use a 6 to 4 tunnel to connect to the Internet.Enter the DNS Address supplied by your Internet provider (ISP). Enter the LAN (local) IPv6 address for the router. Primary DNS Address:LAN IPv6 Address:Click the Save Settings button to save any changes made.
74D-Link DHP-1320 User ManualSection 3 - CongurationIPv66to4 - StatelessTo congure the Router to use an IPv6 to IPv4 tunnel stateless autoconguration connection, congure the parameters in the LAN Address Autoconguration Settings section as described below:Check to enable the Autoconguration feature.Select the Stateless option from the drop-down menu.Enter the Router Advertisement Lifetime (in minutes).Enable automatic IPv6 address assignment: Autoconguration Type:Router Advertisement Lifetime:Click the Save Settings button to save any changes made.
75D-Link DHP-1320 User ManualSection 3 - CongurationIPv66to4 - StatefulTo congure the Router to use an IPv6 to IPv4 tunnel stateful autoconguration connection, congure the parameters in the LAN Address Autoconguration Settings section as described below:Check to enable the Autoconguration feature.Select the Stateful option from the drop-down menu.Enter the start IPv6 Address for the DHCPv6 range for your local computers.Enter the end IPv6 Address for the DHCPv6 range for your local computers.Enter the IPv6 Address Lifetime (in minutes).Enable automatic IPv6 address assignment:Autoconguration Type:IPv6 Address Range Start:IPv6 Address Range End:IPv6 Address Lifetime:Click the Save Settings button to save any changes made.
76D-Link DHP-1320 User ManualSection 3 - CongurationIPv6 My IPv6 Connection:6rd IPv6 Prex:LAN IPv6 Address:Select 6rd from the drop-down menu.Enter the settings supplied by your Internet provider (ISP). Enter the LAN (local) IPv6 address for the router. 6rd
77D-Link DHP-1320 User ManualSection 3 - Conguration6rd (Stateless)Check to enable the Autoconguration feature.Select the Stateless option from the drop-down menu.Enter the Router Advertisement Lifetime (in minutes).Enable automatic IPv6 address assignment: Autoconguration Type:Router Advertisement Lifetime:Click the Save Settings button to save any changes made.IPv6
78D-Link DHP-1320 User ManualSection 3 - Conguration6rd (Stateful)Check to enable the Autoconguration feature.Select the Stateful DCHPv6 option from the drop-down menu.Enter the start IPv6 Address for the DHCPv6 range for your local computers.Enter the end IPv6 Address for the DHCPv6 range for your local computers.Enter the IPv6 Address Lifetime (in minutes).Enable automatic IPv6 address assignment:Autoconguration Type:IPv6 Address Range Start:IPv6 Address Range End:IPv6 Address Lifetime:Click the Save Settings button to save any changes made.IPv6
79D-Link DHP-1320 User ManualSection 3 - CongurationIPv6 over IPv4 TunnelSelect IPv6 over IPv4 Tunnel from the drop-down menu.Enter the IPv6 settings supplied by your Tunnel Broker. Obtain a DNS server address automatically or enter a specic DNS server address. Enter the primary and secondary DNS server addresses. Enter the LAN (local) IPv6 address for the router. My IPv6 Connection:IPv6 over IPv4 Tunnel Settings:IPv6 DNS Settings:Primary/Secondary DNS Address:LAN IPv6 Address:IPv6
80D-Link DHP-1320 User ManualSection 3 - CongurationIPv6 over IPv4 Tunnel - StatelessCheck to enable the IPv6 address assignment feature.Select Stateless. Refer to the previous page for Stateful.Enter the Router Advertisement Lifetime (in minutes).Enable automatic IPv6 address assignment:Autoconguration Type:Router Advertisement Lifetime:IPv6

Navigation menu