D Link HPW312AVA1 Power Line AV 500 Wireless AC600 Extender User Manual

D Link Corporation Power Line AV 500 Wireless AC600 Extender

Contents

user manual

DHP-W312AVUser ManualVersion 1.00 | 22/07/2014PowerLine AV 500 Wireless AC600 Extender
2D-Link DHP-W312AV User ManualTable of ContentsProduct Overview ..............................................................................4Package Contents ........................................................................................... 4System Requirements .................................................................................... 5Introduction ...................................................................................................... 5Connections ............................................................................................. 7Side .............................................................................................................. 8LEDs ............................................................................................................ 9Hardware Installation .....................................................................10Wireless Installation Considerations ......................................................11Powerline Installation Considerations ...................................................12Safety .................................................................................................................13Conguration ................................................................................... 14Setup ..................................................................................................................14Hybrid Link Setup ................................................................................15Wireless Settings ..................................................................................16LAN Settings ..........................................................................................17LAN Settings - Static IP .................................................................18PLC Settings ..........................................................................................19Advanced .........................................................................................................20MAC Address Filter...............................................................................20Advanced Wireless ...............................................................................21User Limit ................................................................................................22Tools ...................................................................................................................23Admin .......................................................................................................23System ...................................................................................................... 24Firmware..................................................................................................25Time ..........................................................................................................26System Check ........................................................................................27Status .................................................................................................................28Device Info .............................................................................................. 28Logs ...........................................................................................................29Statistics ................................................................................................... 30Wireless ....................................................................................................31IPv6 ............................................................................................................ 32Support .............................................................................................................33Wireless Security .............................................................................34What is WEP? ...................................................................................................34What is WPA? ................................................................................................... 35Conguring WEP ...........................................................................................36Conguring WPA/WPA2Personal ............................................................. 37Connecting to a Wireless Network .................................................38Using Windows® 7 .......................................................................................... 38Using Windows Vista® .................................................................................. 41Conguring Wireless Security..........................................................43Using Windows® XP .......................................................................................45Conguring WPA-PSK .........................................................................46Troubleshooting ..............................................................................48Wireless Basics ................................................................................50What is Wireless? ...........................................................................................51Table of Contents
3D-Link DHP-W312AV User ManualTable of ContentsHow does wireless work? ..................................................................51Wireless Local Area Network (WLAN) ...........................................51Networking Basics ...........................................................................54Check your IP address ..................................................................................54Statically Assign an IP address .................................................................. 55Technical Specications ..................................................................56
4D-Link DHP-W312AV User ManualSection 1 - Product OverviewD-Link DHP-W312AV PowerLine AV 500 Wireless AC600 ExtenderCAT5 Ethernet CableWi-Fi Conguration CardWi-Fi Conguration NotePackage ContentsProduct Overview
5D-Link DHP-W312AV User ManualSection 1 - Product OverviewIntroductionThe DHP-W312AV allows you to connect both wired and wireless computers, high-denition TVs, networking devices, and gaming consoles using the most pervasive medium in your home - the electrical wiring. Share Internet connections and experience smooth le transfers, streaming multimedia, online gaming and more. The PowerLine AV 500 Wireless AC600 Extender features easy plug-and-play installation and can be connected to any Ethernet-enabled device.The PowerLine AV 500 Wireless AC600 Extender incorporates the latest technology to improve on the AV technology’s data speeds over a home’s existing electrical wiring. This fast transmission speed provides ample bandwidth suitable for streaming high-quality video HDTV signals while simultaneously providing high-speed Internet access throughout the home. With Quality of Service (QoS) support, the performance of applications which require real-time communication, such as VoIP phonecalls and multiplayer online games, will not be compromised even while streaming Internet TV and music.System RequirementsNetwork Requirements• IEEE 802.11ac, 802.11n or 802.11g• 10/100 Ethernet clientsBrowser Requirements• Internet Explorer 7.0 or higher• Firefox 3.5 or higher• Safari 4.0 or higher• Chrome 8.0 or higher
6D-Link DHP-W312AV User ManualSection 1 - Product OverviewData Transmission Over electrical WiringThe D-Link DHP-W312AV PowerLine AV 500 Wireless AC600 Extender, compliant with the HomePlug AV standard, uses your home’s existing electrical wiring1 to create a network or extend your existing network. It turns every power outlet into a potential network connection to access digital media devices, game consoles, print servers, computers, and network storage devices throughout your home. Additionally, Wireless N provides high speed transfers without the need for unsightly network cables.Faster Wireless Speeds & Wider Operational RangeThe Wireless AC technology incorporated into the DHP-W312AV oers increased speed and range beyond standard 802.11n technology. Initial wireless setup can be accomplished quickly, thanks to a convenient setup wizard. WPA and WPA2 encryption keep your network trac safe and secure.Ideal For Bandwidth-Intensive ApplicationsThe DHP-W312AV is capable of delivering Powerline AV data transfer rates even higher than the old AV standard. This rapid transmission speed makes it ideal for bandwidth-intensive applications, guaranteeing smooth HD video streaming, clear VoIP calls, and lag-free online gaming experiences. In addition, it prioritizes Internet trac, ensuring that multimedia applications do not experience glitches while web surng and downloads are in progress. This device provides ample network bandwidth, enabling digital home consumers to tap into existing electrical wiring for high-quality multimedia streaming.Convenient Setup and Secure OperationThe DHP-W312AV plugs directly into a power outlet, and does not require any additional cables. Extend your home network by connecting multiple devices in the farthest corners of your home via Ethernet cable or Wireless AC. For convenient setup, wired or wireless encryption keys can be quickly congured with the push of a button on top of the device. The adapter implements 128-bit AES data encryption to protect the network from unauthorized wiretapping. With hassle-free plug and play installation, the DHP-W312AV is an ideal solution to create a wall-to-wall home network.1Power outlets and electrical wiring must all be part of the same electrical system. Certain electrical conditions in your home, such as wiring condition and conguration, may aect the performance of this product. Additional D-Link Powerline AV adapters are required to add new devices to the network. A minimum of two D-Link Powerline AV Network Adapters are required to create a network. Connecting this product to a power strip with a surge protector may adversely aect the performance of this product. For best results, plug the adapter directly into a wall outlet.
7D-Link DHP-W312AV User ManualSection 1 - Product OverviewHardware OverviewConnections1Internet Port2Reset3WPS1231
8D-Link DHP-W312AV User ManualSection 1 - Product OverviewHardware OverviewSide1ON/OFF Turns the device ON or OFF1
9D-Link DHP-W312AV User ManualSection 1 - Product OverviewHardware OverviewLEDs1Power LED A solid light indicates a proper connection to the power supply. A blinking light indicates it is in sleep mode or seeking a Powerline connection.2Powerline LED A solid light indicates that a Powerline connection is established.3Ethernet LED A solid light indicates a connection to an Ethernet-enabled device.21 32
10D-Link DHP-W312AV User ManualSection 2 - InstallationHardware InstallationPowerPlug the DHP-W312AV into an AC wall outlet where you want to extend your network. The Power LED on the DHP-W312AV will turn on to indicate it is receiving power. This may take up to 60 seconds.Plug in the Ethernet CableConnect one end of the supplied CAT5 Ethernet cable to the Ethernet port on the DHP-W312AV and the other end of the cable to the device’s Ethernet interface.Connect to Existing NetworkPress the Common Connect Button on the existing Powerline AV device for 3 seconds. Then, press the Common Connect Button on the DHP-W312AV PowerLine AV 500 Wireless AC600 Extender for 3 seconds. This must be done within two minutes after pressing the Common Connect Button on the rst device. The Powerline devices will reboot. Read the Wi-Fi advice on the next page, and continue to Conguration.Note: Network connectivity is conrmed when the Powerline LEDs indicators on both Powerline devices are steadily lit. This will indicate that your network is now secure.Note: A minimum of two Powerline devices (your DHP-W312AV and another pre-existing device) are required to create a Powerline network. ROOM A ROOM B ROOM CDHP-W312AV DHP-W312AVDHP-308AVRouterInternet Notebook NotebookiPad iPad
11D-Link DHP-W312AV User ManualSection 2 - InstallationWireless Installation ConsiderationsThe DHP-W312AV lets you access your network using a wireless connection from anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Keep the number of walls and ceilings between the DHP-W312AV and other network devices to a minimum. Each wall or ceiling can reduce your adapter’s range by 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters) at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building materials make a dierence. A solid metal door or aluminum studs may have a negative eect on range. Try to position the wireless DHP-W312AV and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.5. If you are using 2.4GHz cordless phones or wireless products such as ceiling fans, lights, and home security systems, your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use.
12D-Link DHP-W312AV User ManualSection 2 - InstallationPowerline Installation ConsiderationsPlan the location of your Powerline devices:1. Connect Powerline devices to electrical outlets that are not controlled by a wall switch to avoid accidentally turning o power to the device. 2. Do not connect the Powerline devices to an extension cord, surge protector, or power strip as this might prevent it from working correctly, or negatively impact network performance. 3. Avoid using the Powerline devices in an electrical outlet that is located near an appliance that uses a lot of power, such as a washer or dryer, or a refrigerator. This may prevent the adapter from working correctly, or negatively impact network performance. 4. Verify that your Powerline devices are electrically rated to operate with the power available in your location. 5. To help prevent against electrical shock, be sure to plug the power cables into properly grounded electrical outlets.
13D-Link DHP-W312AV User ManualSection 2 - InstallationPlease read all of the safety and operating instructions before using your device:1. Do not open the device or attempt to repair or service the device. 3. Ensure that the device is plugged into the wall in a vertical position.4. Use the device in a dry location, and avoid placing it in humid environments.5. Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean the device, disconnect it from the power outlet and use a damp towel.6. Keep the device out of direct sunlight.7. Do not cover or block the vents on the device.8. Make sure that the device has adequate room for ventilation.9. Avoid placing the device near a heater or radiator. Safety
14D-Link DHP-W312AV User ManualSection 3 - CongurationCongurationSetupIf you wish to change the default settings or optimize the performance of the DHP-W312AV, you may use the web-based conguration utility.To access the conguration utility, open a web browser such as Internet Explorer and enter either http://dlinkapWXYZ.local. (this is on the Wi-Fi Conguration Card) or http://192.168.0.50 in the address eld.By default, Admin will be the User Name . Leave the password blank.If you receive a “Page Cannot be Displayed” error, please refer to “Troubleshooting” on page 48 for assistance.You will automatically proceed to the Setup heading after logging in.
15D-Link DHP-W312AV User ManualSection 3 - CongurationHybrid Link SetupUse the wizard’s on-screen incstructions to conveniently set up your network if you have not yet. You can also manually congure your network. Wi-Fi settings are covered at “Wireless Settings” on page 16 and Powerline settings are at “PLC Settings” on page 19.
16D-Link DHP-W312AV User ManualSection 3 - CongurationWireless SettingsThe Service Set Identier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The SSID is case-sensitive. Enable Auto Channel.The auto channel selection setting can be selected to allow this device to choose the channel with the least amount of interference.By default the channel is set to 1. The Channel can be changed to t the channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Selection, this option will be greyed out.WPA/WPA2 is more secure than WEP. WEP should only be used if you have older devices that are unable to use WPA. Use of TKIP/AES security framework provides the optimum mix of security and compatibility. Please refer to “Wireless Security” on page 34 for more information.Choose a password that is strong. A good password uses both letters and numbers in unpredictable places. Example bad passwords could be password or 12345678.Wireless Network Name:Enable Auto Channel Scan:Wireless Channel:Wireless Security & WPA:Password:The DHP-W312AV lets you customize your wireless settings for your access point. This device allows you to extend your current network so you can roam about the house while staying connected the entire time.
17D-Link DHP-W312AV User ManualSection 3 - CongurationLAN SettingsThis section will allow you to change the local network settings of the DHP-W312AV and to congure the DHCP settings.Enter the Device Name of this DHP-W312AV. You will use this name to connect to it through a web browser. The default name is listed on your Wi-Fi Conguration Card.Use the drop-down menu to select Dynamic IP (DHCP) to automatically obtain an IP address on the LAN/private network. For Static IP setup, see the next page.Your Internet Service Provider (ISP) may require this to be set a certain way for Internet access. Contact your ISP regarding such requirements.This shows the current IPv6 address of the DHP-W312AV on your network.Click Save Settings to save and activate thenew changes.Device Name:LAN ConnectionType:IPv6 Connection Type:LAN IPv6 Address Settings:Save Settings:
18D-Link DHP-W312AV User ManualSection 3 - CongurationSelect Static IP to manually enter the IP address, subnet mask, and default gateway addresses.LAN Connection Type:IP Address:Subnet Mask:Default Gateway:DNS Server:Save Settings:Select Static IP from the drop-down menu.Enter the IP address of the DHP-W312AV. The default IP address is 192.168.0.50. If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to return to the congurationutility. You can also connect with the device name. (See previous page.)Enter the Subnet Mask.Enter the Gateway. This is usually the LAN or internal IP address of your router.This is the Domain Name Server that looks up addresses on the Internet, you may have a specic one you need to connect to.Click Save Settings to save and activate thenew changes.LAN Settings - Static IP
19D-Link DHP-W312AV User ManualSection 3 - CongurationThis section will show you how to congure your new D-Link Powerline AV using the web-based conguration utility.PLC Settings Power Saving:Network Name:Public Network Name:Private Network Name:Scan:Member List:QoS Setting:MAC Address/Port Number:Power save mode.You can set the name of your network and to make it either public or private. Make sure the Network Name of all of the devices within your Powerline network is the same.Select this option if you would like to make your Powerline network public with the default Network Name of “HomePlugAV”. Since this is a commonly used Network Name, it is less secure than a private Network Name. Select this option if you wish to make your Powerline network more secure by using a private Network Name. Click this button to scan for new Powerline devices. This is automatically done periodically and upon loading this page.This section provides information on the Powerline AV devices on your Powerline network.Here you can set the Quality of Service (QoS) settings for each network device. QoS helps you prioritize network trac based on device or the port the trac is on.Select a device from the Computer Name dropdown box and then click the << above Computer Name to automatically ll in the device’s MAC Address. Or, Set the priority for the device under the Priority dropdown box. Clear settings for a rule with the Clear button. Remember to click Save Settings after making changes.
20D-Link DHP-W312AV User ManualSection 3 - CongurationUse MAC (Media Access Control) Filters to authorize wireless clients to access your network by their MAC addresses. When enabled, you can choose to block the devices listed, or only allow the devices listed.MAC Address FilterMAC Filtering Rules:Description:MAC Address:Clear:Save Settings:Set MAC Filtering to ALLOW, DENY, or OFF. ALLOW means only the devices listed can access the network. DENY means the devices listed cannot access the network. OFF means this function is currently disabled.You may make a note for your convenience, such as “My PC” or “My friend’s smartphone”Enter the MAC address you would like to lter. To nd the MAC address on a computer, please refer to “Networking Basics” on page 54. Click Save Settings to activate and save.Note: If you are ltering to ALLOW only the listed devices, make sure to add your own computer to the list or you will be denied access to the network and the conguration utility. If you DENY the listed addresses be sure not to include your computer.Clear the rule from the list. Note you will have to save the settings in order for it to take eect.Click Save Settings to save and activate the new changes.Advanced
21D-Link DHP-W312AV User ManualSection 3 - CongurationAdvanced WirelessTransmit Power:WMM Enable:Short GI:IGMP Snooping:WLAN Partition:HT20/40 Coexistence:Sets the transmit power of the antennas.WMM is a Quality of Service (QoS) system for your wireless network. Enabling this feature will improve the quality of video and voice applications for your wireless clients.Check this box to reduce the guard interval time therefore increasing the data capacity. However, this setting may decrease stability and reliability.Select this checkbox to enable IGMP snooping. IGMP snooping is a layer 2 feature which enables the device to learn Multicast group membership based on IGMP messages passing through the built-in switch. Because the switch learns the IGMP messages and knows which clients are involved in the multicast group membership, it is able to forward multicast trac only to the ports that requested it (based on their membership).Select this checkbox to enable WLAN partition. If this feature is enabled, then there is no barrier between communication among wireless stations connecting to the DHP-W312AV. If this is disabled, wireless clients are not allowed to exchange data through the DHP-W312AV.Enabling this function allows compatibility with both 802.11n devices as well as 802.11b/g at the cost of speed. Disabling this will give higher speeds but only allow 802.11n devices to function.The Advanced Wireless section allows you to change several advanced settings on your DHP-W312AV. Most users will not need to modify this section.
22D-Link DHP-W312AV User ManualSection 3 - CongurationUser LimitThis screen lets you set the maximum number of wireless clients that can connect at one time to your DHP-W312AVEnable UserLimit:User Limit:SaveSettings:Check the Enable User Limit box to enable limiting the number of devices that can connect to the DHP-W312AV.Enter the maximum number of clients, between 1 and 32.Click Save Settings to save and activate thenew changes.
23D-Link DHP-W312AV User ManualSection 3 - CongurationAdminThis page will allow you to change the administrator password, which is used to access the conguration interface and change settings.Enter a new password for the admin user name. The administrator account can change the conguration of the device.Enter the same password that you entered in the previous textbox in order to conrm its accuracy.Enables a CAPTCHA verication which will require users to type letters or numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your device’s configuration. This feature is disabled by default.Click Save Settings to save and activate thenew changes.Password:VerifyPassword:EnableGraphical Authentication:Save Settings:Tools
24D-Link DHP-W312AV User ManualSection 3 - CongurationSystemSave Settings To Local Hard Drive:Load Settings FromLocal Hard Drive:Restore toFactory Default Settings:Reboot theDevice:Clear Language Pack:Use this option to save the current DHP-W312AV conguration settings to a le on the computer you are using. Click the Save button. You will then see a le dialog where you can select a location and le name for the settings.Use this option to load previously saved DHP-W312AV conguration settings. Click Browse to nd a previously saved conguration le. Then, click the Upload Settings button to transfer those settings to the DHP-W312AV.This option will restore all configuration settings back to the settings that were in eect at the time the DHP-W312AV was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you would like to save the current DHP-W312AV conguration settings, use the Save button above.Click to reboot the DHP-W312AV.Clears any language pack that is currently installed. For more about language packs, refer to “Firmware” on page 25.This page lets you both save and delete settings on your DHP-W312AV.
25D-Link DHP-W312AV User ManualSection 3 - CongurationFirmwareYou can upgrade the rmware of the DHP-W312AV from this page. Make sure the rmware you would like to use is on the local hard drive of your computer. Click Browse... to locate the rmware le to be used for the update. Please check the D-Link support site for rmware updates at http://support.dlink.com. You can download rmware upgrades to your hard drive from the D-Link support site.Click on the blue hyperlink at the top of the page the to nd out if there is an updated rmware or language pack. If a new version exists, download the new rmware to your hard drive.After you have downloaded the new rmware, click Browse... to locate the rmware update on your hard drive. Click Upload to complete the rmware upgrade.You can change the interface language of the device by uploading a language pack. To install a language pack, click the Browse... button to locate the D-Link language pack upgrade le on your computer. Once you have found the le, click the Upload button to begin the language pack upgrade process. This can take a minute or more. Finally, wait for the device to reboot. This process can take about 75 seconds.FirmwareInformation:Firmware Upgrade:Language PackUpgrade:
26D-Link DHP-W312AV User ManualSection 3 - CongurationTimeThe Time Conguration option allows you to congure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in. Daylight Saving can also be congured to automatically adjust the time when needed.Time Zone:Daylight Saving:Enable NTP Server:NTP Server Used:Date and Time:Save Settings:Select the Time Zone from the drop-down menu.To enable Daylight Saving time adjustment, click the Enable Daylight Saving check box. Next, use the drop-down menu to select a Daylight Saving Oset and then enter a start date and an end date for daylight saving time.NTP (Network Time Protocol) allows the device to automatically set the system clock based on an Internet NTP server. Check this box to use a NTP server. This will only connect to a server on the Internet, not a local server.Enter the NTP server or select one from thedrop-down menu.To manually input the time, enter the values in these elds for the Year, Month, Day, Hour, Minute, and Second and then click Save Settings. You can also click the Copy Your Computer’s Time Settings button at the bottom of the screen.Click Save Settings to save and activate thenew changes.
27D-Link DHP-W312AV User ManualSection 3 - CongurationSystem CheckThis page helps you to diagnose connection problems. Ping Test:IPv6 Ping Test:Ping Result:A ping test sends a tiny bit of information to a website and anticipates a response. Pinging an extremely stable site such as your favorite search engine or news site can help tell you if your Internet connection is working properly. If you can ping a site or address from here but your computer is getting no connectivity, then the DHP-W312AV is working properly but there is the problem with the computer.This is similar to the regular Ping Test but using a IPv6 address. “Ping timeout” means that the site did not respond. This happens if the site is down or does not exist, but also if you do not have Internet connectivity. If you ping several common websites and all result in a timeout then there is likely an issue with your Internet connection. If the result says a site is alive, then your Internet connection is working.
28D-Link DHP-W312AV User ManualSection 3 - CongurationDevice InfoThis page displays the current information for the DHP-W312AV. It will display the LAN and wireless LAN information.General:LAN:Wireless LAN:PLC:Displays the DHP-W312AV’s time and rmware version.Displays the MAC address and the private (local) IP settings for the DHP-W312AV.Displays the wireless MAC address and your wireless settings such as SSID and Channel.Shows the DHP-W312AV’s Powerline Connection settings.Status
29D-Link DHP-W312AV User ManualSection 3 - CongurationLogsThe DHP-W312AV keeps a running log of events and activities occurring on the DHP-W312AV. If the AP is rebooted, the logs are automatically cleared. You can save the log les prior to clearing them.Log Options:Save Log File:First Page:Last Page:Previous:Next:Clear:You can select the types of messages that you would like to display from the log: System Activity, Wireless Activity, Critical, Warning, Information. Select the types you want to view and click Save Settings.Save the log to your hard drive.Go to the rst page of the log.Go to the last page of the log.Go to the previous page of the log.Go to the next page of the log.This button clears all current log content.
30D-Link DHP-W312AV User ManualSection 3 - CongurationStatisticsThe DHP-W312AV keeps statistics on the trac that passes through it. You can view the amount of packets that pass through the LAN and wireless portions of the network. The trac counter will reset if the DHP-W312AV is rebooted.
31D-Link DHP-W312AV User ManualSection 3 - CongurationWirelessThis section allows you to view the wireless devices that are connected to your wireless DHP-W312AV.Number of Wireles Clients:SSID:MAC Address:Uptime:Mode:Rssi (%):Displays the number of devies that are connected to the DHP-W312AV via wireless.The wireless network’s name.Displays the Ethernet ID (MAC address) of the wireless client.Shows how long that device has been connected to the DHP-W312AV.Shows the mode the device is using to connect to your DHP-W312AV. This should be 11b, 11g, or 11n.This shows the strength of your device’s connection.
32D-Link DHP-W312AV User ManualSection 3 - CongurationIPv6This section will display all of your IPv6 Internet and network connection details.
33D-Link DHP-W312AV User ManualSection 3 - CongurationSupportClick on a link in the Support heading for more information on each section of the rmware.
34D-Link DHP-W312AV User ManualSection 3 - CongurationWireless SecurityThis section will show you the dierent levels of security you can use to protect your data from intruders. The DHP-W312AV oers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK (Pre-Shared Key) • WPA (Wi-Fi Protected Access) • WPA-PSK (Pre-Shared Key) • WEP (Wired Equivalent Privacy)What is WEP?WEP stands for Wired Equivalent Privacy. It is based on the IEEE 802.11 standard and uses the RC4 encryption algorithm. WEP provides security by encrypting data over your wireless network so that it is protected as it is transmitted from one wireless device to another.To gain access to a WEP network, you must know the key. The key is a string of characters that you create. When using WEP, you must determine the level of encryption. The type of encryption determines the key length. 128-bit encryption requires a longer key than 64-bit encryption. Keys are dened by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange – alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted toHEX for use over the network. Four keys can be dened so that you can change keys easily.
35D-Link DHP-W312AV User ManualSection 3 - CongurationWhat is WPA?WPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).The 2 major improvements over WEP:• Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and, by adding an integrity-checking feature, ensures that the keys haven’t been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP.• User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computer’s hardware-specic MAC address, which is relatively simple to be snied out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network.WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. This key must be the exact same key entered on your wireless bridge or DHP-W312AV.WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network.
36D-Link DHP-W312AV User ManualSection 3 - CongurationConguring WEPIt is recommended to enable encryption on your wireless DHP-W312AV before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.1. Log into the web-based configuration by opening a web browser and entering http://dlinkapWXYZ.local. (on the Wi-Fi Conguration Card) or the IP address of the DHP-W312AV (192.168.0.50). Click on Setup and then click Wireless Settings on the left side.2. Next to Security Mode in the Wireless Security Mode section, select WEP Mode.3. Next to WEP Encryption, select 64-bit or 128-bit encryption.4. Next to WEP Key 1, enter a WEP key that you create. Make sure you enter this key exactly on all your wireless devices. 5. Next to Authentication, select Both or Shared Key.
37D-Link DHP-W312AV User ManualSection 3 - CongurationConguring WPA/WPA2 PersonalIt is recommended to enable encryption on your wireless DHP-W312AV before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.1. Log into the web-based conguration by opening a web browser and entering the IP address of the DHP-W312AV (192.168.0.50) or http://dlinkapWXYZ.local. (on the Wi-Fi Conguration Card) then click on Setup and then click Wireless Settings on the left side.2. For Security Mode, select WPA/WPA2Personal. 3. For Wi-Fi Password, enter a key. The password must be between 8-63 characters and use numbers, letters, and/or special characters.6. Click Save Settings at the top of the window to save your settings. If you are conguring the DHP-W312AV with a wireless adapter, you will lose connectivity until you enable WPA on your adapter and enter the same passphrase as you did on the DHP-W312AV.
38D-Link DHP-W312AV User ManualSection 3 - CongurationConnecting to a Wireless NetworkUsing Windows® 7It is recommended to enable wireless security (WPA/WPA2) on your DHP-W312AV before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.1. Click on the wireless icon in your system tray (lower-right corner).2. The utility will display any available wireless networks in your area.Wireless Icon
39D-Link DHP-W312AV User ManualSection 3 - Conguration3. Highlight the wireless network (SSID) you would like to connect to and click the Connect button. The Wi-Fi Conguration Card will list your device’s specic network, it will not be simply dlink. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.4. The following window appears while your computer tries to connect to the router.
40D-Link DHP-W312AV User ManualSection 3 - Conguration5. Enter the same security key or passphrase that is on your DHP-W312AV and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.Additionally, you may connect using Wi-Fi Protected Setup (WPS) and Push Button Conguration (PBC). When the window to the right is displayed, press the Common Connect Button on the DHP-W312AV.
41D-Link DHP-W312AV User ManualSection 3 - CongurationConnecting to a Wireless NetworkUsing Windows Vista® Windows Vista® users may use the convenient, built-in wireless utility. Follow these instructions:From the Start menu, go to Control Panel, and then click on Network and Sharing Center.The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. The Wi-Fi Conguration Card will list your device’s specic network, it will not be simply dlink.If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.Click Connect Anyway to continue.
42D-Link DHP-W312AV User ManualSection 3 - CongurationThe utility will display the following window to indicate a connection is being made.The final window indicates the establishment of a successful connection.The next two pages display the windows used to connect to either a WEP or a WPA-PSK wireless network.
43D-Link DHP-W312AV User ManualSection 3 - CongurationConguring Wireless SecurityIt is recommended to enable wireless security (WPA/WPA2) on your wireless router or DHP-W312AV before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.2. Highlight the wireless network (SSID) you would like to connect to and click Connect.1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network.
44D-Link DHP-W312AV User ManualSection 3 - Conguration3. Enter the same security key or passphrase that is on your router and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
45D-Link DHP-W312AV User ManualSection 3 - CongurationConnecting to a Wireless NetworkUsing Windows® XPWindows XP users may use the built-in wireless utility (Zero Conguration Utility). The following instructions are for Service Pack 2 users. If you are using another company’s utility or Windows 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows XP utility as seen below.Right-click on the wireless computer icon in your system tray (lower right corner next to the time). Select View Available Wireless Networks.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. orThe utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. The Wi-Fi Conguration Card will list your device’s specic network, it will not be simply dlink.If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.
46D-Link DHP-W312AV User ManualSection 3 - CongurationConguring WPA-PSKIt is recommended to enable encryption on your wireless router or DHP-W312AV before conguring your wireless adapter. If you are joining an existing network, you will need to know the passphrase being used.1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect.
47D-Link DHP-W312AV User ManualSection 3 - Conguration3. The Wireless Network Connection box will appear. Enter the WPA-PSK passphrase and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router.
48D-Link DHP-W312AV User ManualSection 4 - TroubleshootingTroubleshootingThis chapter provides solutions to problems that can occur during the installation and operation of the DHP-W312AV. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If you have a dierent operating system, the screenshots on your computer will look similar to the following examples.)1. Why am I unable to access the web-based conguration utility? When entering the IP address of the D-Link DHP-W312AV (192.168.0.50), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in from the factory. Your computer must be on the same IP subnet to connect to the web-based utility. You may also enter http://dlinkapWXYZ.local. (on the Wi-Fi Conguration Card) instead of the IP address.• Make sure you have an updated Java-enabled web browser. We recommend the following:- Microsoft Internet Explorer® 7.0 and higher- Mozilla Firefox 3.5 and higher- Google™ Chrome 8.0 and higher- Apple Safari 4.0 and higher• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a dierent cable or connect to a dierent port on the device if possible. If the computer is turned o, the link light may not be on.• Disable any internet security software running on the computer. Software rewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows® XP rewall may block access to the conguration pages. Check the help les included with your rewall software for more information on disabling or conguring it.
49D-Link DHP-W312AV User ManualSection 4 - Troubleshooting• Congure your Internet settings:• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK.• Go to the Advanced tab and click the Reset... button to restore these settings to their defaults. Click OK three times.• Close your web browser (if open) and open it.• Access the web management. Open your web browser and enter the IP address of your D-Link DHP-W312AV in the address bar. This should open the login page for your the web management.• If you still cannot access the conguration, unplug the power to the DHP-W312AV for 10 seconds and plug back in. Wait about 30 seconds and try accessing the conguration. If you have multiple computers, try connecting using a dierent computer.2. What can I do if I forgot my password?If you forgot your password, you must reset your DHP-W312AV. Unfortunately this process will change all your settings back to the factory defaults.To reset the DHP-W312AV, locate the reset button (hole) on the rear panel of the unit. With the DHP-W312AV powered on, use a paperclip to hold the button down for 5 seconds. Release the button and the DHP-W312AV will go through its reboot process. Wait about 30 seconds to access the DHP-W312AV. The default IP address is 192.168.0.50. When logging in, the username is Admin and leave the password box empty3. Why can’t my Powerline AV device detect my other Powerline AV devices?This may due to the accidental change of the device password. Use the web-based conguration utility and select Setup > PLC SETTINGS. Fill in the password in the blank. Then repeat the same procedure to the other Powerline AV device via web-based conguration utility.4. I cannot start my Powerline AV device.Please check your power supply is working. Powerline AV device operates from the power supplied by the home electrical wiring and can not operate without a working power supply.
50D-Link DHP-W312AV User ManualSection 4 - TroubleshootingWireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and oce environments, and public areas such as airports, coee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more eciently. Increased mobility and the absence of cabling and other xed infrastructure have proven to be benecial for many users.Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN.
51D-Link DHP-W312AV User ManualSection 4 - TroubleshootingWhat is Wireless?Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or oce.D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products.D-Link delivers the performance you need at a price you can aord. D-Link has all the products you need to build yournetwork.How does wireless work?Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two dierent types of wireless networks Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN). Wireless Local Area Network (WLAN)In a wireless local area network, a device called an DHP-W312AV (AP) connects computers to the network. The DHP-W312AV has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor DHP-W312AV as seen in the picture, the signal can travel up to 300 feet. With an outdoor DHP-W312AV the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues.
52D-Link DHP-W312AV User ManualSection 4 - TroubleshootingWho uses wireless?Wireless technology has become so popular in recent years that almost everyone is using it. Whether it’s for home, or oce D-Link has a wireless solution for it.Home• Gives everyone at home broadband access• Surf the web, check email, instant message, etc.• Gets rid of the cables around the house• Simple and easy to useSmall Oce and Home Oce• Stay on top of everything at home as you would at oce• Remotely access your oce network from home• Share Internet connection and printer with multiple computers• No need to dedicate oce space
53D-Link DHP-W312AV User ManualSection 4 - TroubleshootingWhere is wireless used?Wireless technology is expanding everywhere not just at home or oce. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coee Shops, Libraries, Restaurants, and Convention Centers. A wireless network is easy to setup, but if you’re installing it for the rst time it could be quite a task not knowing where to start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.TipsHere are a few things to keep in mind, when you install a wireless network.Centralize your DHP-W312AV or DHP-W312AVMake sure you place the bridge/DHP-W312AV in a centralized location within your network for the best performance. Try to place the bridge/DHP-W312AV as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range.Eliminate InterferencePlace home appliances such as cordless telephones, microwaves, wireless speakers, and televisions as far away as possible from the bridge/DHP-W312AV. This would signicantly reduce any interference that the appliances might cause since they operate on same frequency.SecurityDon’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA, WPA2, or WEP security feature on the DHP-W312AV.
54D-Link DHP-W312AV User ManualSection 4 - TroubleshootingNetworking BasicsAfter you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start Search box.)At the prompt, type ipcong and press Enter.This will display the IP address, subnet mask, and the default gateway of your adapter.If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your DHP-W312AV. Some rewall software programs may block a DHCP request on newly installed adapters.If you are connecting to a wireless network at a hotspot (e.g. hotel, coee shop, airport), please contact an employee or administrator to verify their wireless network settings.Check your IP address
55D-Link DHP-W312AV User ManualSection 4 - TroubleshootingStatically Assign an IP addressIf you are not using a DHCP capable gateway/DHP-W312AV, or you need to assign a static IP address, please follow the steps below:Step 1Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.Windows® XP - Click on Start > Control Panel > Network Connections.Windows® 2000 - From the desktop, right-click My Network Places > Properties.Step 2Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.Step 3Highlight Internet Protocol (TCP/IP) and click Properties.Step 4Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.Example: If the AP’s LAN IP address is 192.168.0.50, make your IP address 192.168.0.X where X is a number between 2 and 99 (excluding the number 50). Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).Set Primary DNS the same as the LAN IP address of your router (192.168.0.1).The Secondary DNS is not needed or you may enter a DNS server from your ISP.Step 5Click OK twice to save your settings.
56D-Link DHP-W312AV User ManualAppendix A - Technical SpecicationsTechnical SpecicationsStandards • IEEE 802.11ac • IEEE 802.11n • IEEE 802.11g • IEEE 802.3 • IEEE 802.3u • IEEE P1905.1 draft • IEEE 1901Network Interfaces • One 10/100 Ethernet port • Wireless AC • PowerlineAC Input • 100 - 240 VAC 50/60 HzSecurity • WPA • WEP • WPA2 Wireless Signal Rates* • 300Mbps • 12Mbps • 108Mbps • 11Mbps • 54Mbps • 9Mbps • 48Mbps • 6Mbps • 36Mbps • 5.5Mbps • 18Mbps • 2Mbps • 24Mbps • 1MbpsMSC (0-15) • 130Mbps (270) • 117Mbps (243) • 104Mbps (216) • 78Mbps (162) • 66Mbps (135) • 58.5Mbps (121.5) • 52Mbps (108) • 39Mbps (81) • 26Mbps (54) • 19.5Mbps (40.5) • 12Mbps (27) • 6.5Mbps (13.5) Frequency Range • 2.4GHz to 2.497GHzEncryption • 128-bit AES • WEP/WPA/WPA2Operating Temperature • 32 to 104 °F (0 to 40 °C)Storage Temperature • 14 to 158 °F (-10 to 70 °C)Humidity • Operation: 10% to 90% Relative Humidity • Storage: 5% to 90% Relative HumidityTransmitter Output Power • 13 dBm (+/- 2dB)* Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely aect wireless signal range.
57D-Link DHP-W312AV User ManualAppendix A - Technical SpecicationsLEDs • Power • Ethernet • WLAN • Powerline Safety & Emissions • FCC • CE • RoHS • UL, CE LVDDimensions • 101 x 75 x 45 mm (3.54 x 2.56 x 1.97 inches)Weight • United Kingdom: 185.7 g (.41 lbs) • United States: 174.5 g (.38 lbs) • Australia: 179.1 g (.39 lbs) • Europe: 174.8 g (.38 lbs)
58D-Link DHP-W312AV User ManualFederal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Country Code selection feature to be disabled for products marketed to the US/CANADA Industry Canada statement:This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
59D-Link DHP-W312AV User ManualLe présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.Caution :(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;Avertissement:(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur an de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d’exposition aux radiations:Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Navigation menu