D Link IR506LA1 Pocket Cloud Router User Manual

D Link Corporation Pocket Cloud Router

User Manual

Start Here - Select The ModeQuick Install GuidePackage ContentsIf any of the above items are missing, please contact your reseller.DIR-506LLEDsSharePort™ GoYour Mobile CompanionPower LED - A solid amber light indicates a proper connection to the power supply. The light will blink green when the USB cable is disconnected. Start HereSharePort Mobile AppScan this QR code using your mobile device to download the App and begin le sharing. Requirements: Compatible with iPhone, iPod touch and iPad. Requires iOS 4.3 or later.Router Mode Repeater Mode Wi-Fi Hotspot ModeThis feature allows you to share a single internet connection with multiple devices such as a laptop, mobile phone, ipad, etc. It behaves as a router in areas where you cannot take your home router.This feature extends your wireless coverage allowing you to share your wireless signal with all your portable devices such as your mobile device or laptop. This provides your own private network from anywhere that you may travel and allows you to share a single connection with multiple devices (laptop, mobile phone, Ipad etc.).Pleaser refer to the user manual for further information regarding SharePort Mobile App. Please download the user manual from http://www.dlink.com/support/2345Router Mode1Connect your device to your laptop to charge using a USB cable. Then, turn on the power switch and wait until the power LED turns green. Connect one end of the Ethernet cable into the Ethernet port of the Internet-enabled device (e.g. modem) and then plug the other end of this cable into the Ethernet port of the DIR-506L.From your laptop or mobile device go to your Wireless Utility to display the available wireless networks and select the dlink_DIR-506L for the Wi-Fi name. The password should be left blank. Open a web browser and type http://192.168.0.1 in the address bar. Then, type admin as your user name and click Login. Go to Setup > Internet and click on Internet Connection Setup Wizard to run the wizard. InternetWelcome to the Setup Wizard please read the steps and click Next to continue. Select your Time Zone from the drop-down list and click Next to continue. Select the Internet connection type you would like to use. Then, click Next and follow the on-screen instructions to complete the setup. Once you completed the setup, proceed to step 10.6789 10From your laptop or mobile device go to your wireless utility to display the available wireless networks and select the network that you previously connected to for internet access.Choose a password to secure your networking device. Enter your new password under Password and Verify Password. Then, click Next. AP ModeSharePortSharePortSharePort SharePortNote: The SharePort Mobile App only works on Router and Wi-Fi Hotspot Mode. Use Access Point (AP) mode if you want to connect wireless clients (such as laptops, tablets, smartphones, and media players) to your wired network (via router, switch, or PowerLine devices).LANONOFF5VLANONOFF5VLANONOFF5VSharePortSharePortLANONOFF5VLANONOFF5VLANONOFF5VSharePortSharePort2345Wi-Fi Hot Spot Mode1Connect your device to your laptop to charge using a USB cable. Then, turn on the power switch and wait until the power LED turns green. Verify if the Power LED is lit amber and Wi-Fi LED turn green. Open a web browser and type http://192.168.0.1 in the address bar. Then, type admin as your user name and click Login. Go to Setup > Internet and click on Internet Connection Setup Wizard to run the wizard. Welcome to the Setup Wizard please read the steps and click Next to continue. Select your Time Zone from the drop-down list and click Next to continue. Select the Wi-Fi HotSpot and click Next. 6789 10From your laptop or mobile device go to your wireless utility to display the available wireless networks and select the network that you previously connected to for internet access.Choose a password to secure your networking device. Then, enter your new password under Password and Verify Password. Click Next. LANONOFF5VLANONOFF5VLANONOFF5VSharePortNote: the USB cable is only for power. It does not transmit data. USB LED - A solid green light indicates that the USB cable is attached. A ashing green will indicate access to a le is being transmitted. Wi-Fi LED - A blinking green light will indicate data is being transmitted. Select the wireless network you would like to connect to and click Select. Then, enter your Pre-Shared Key information. Click Next and follow the on-screen instructions to complete the setup and proceed to Step 10.Ethernet LED - A green light indicates the Ethernet connection has been established. A blinking green indicates data is being transferred. IOSAndroidFrom your laptop or mobile device go to your Wireless Utility to display the available wireless networks and select the dlink_DIR-506L for the Wi-Fi name. The password should be left blank. Ethernet CableBatteryPlease make sure you insert the battery before using the DIR-506L.SharePort™ GoYour Mobile CompanionUSB cable
©2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the property of their respective owners.Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11a and 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.Product specications, size and shape are subject to change without notice, and actual product appearance may dier from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more details.iPhone, iPad, and iPod touch are registered trademarks of Apple Inc.U.S. and Canadian customers can contact D-Link technical support through our web site or by phone. You can nd software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.Before you contact technical support, please have the following ready:• Model number of the product (e.g. DIR-506L)• Hardware Revision (located on the label on the bottom of the product (e.g. rev A1))• Serial Number (s/n number located on the label on the bottom of the product).United StatesTelephone: (877) 453-5465Internet: http://support.dlink.comCanadaTelephone: (800) 361-5265Internet: http://support.dlink.caTechnical SupportVersion 1.0 July 2, 2012 11500Y20ND00301A12345SharePort Mobile (Only Works with Router & Wi-Fi HotSpot Mode)1Connect one end of the Ethernet cable into the Ethernet port of the Internet-enabled device (e.g. modem) and then plug the other end of this cable into the Ethernet port of the DIR-506L. Insert your USB ash drive to DIR-506L.Note: The DIR-506L supports FAT32 and NTFS USB format. Also, if your USB storage contains more than 1000 les(total size over 500GB), please be patient as it will take more time to sort out all the les in your storage. Scan the bar code or search the app from the Google Play or iTune store to download the Shareport Mobile App to your iPhone, iPad or Android devices. Once the application has been downloaded, continue to the next step. From your mobile device, click Settings. Click Wi-Fi and select the Wi-Fi name (SSID) that you assigned during initial setup. Then, enter your Wi-Fi password. Settings1 2 3 46Once connected click on the SharePort Mobile icon. Then, the following screen will pop up.7Click on the Settings icon located on the right top corner of the screen. Then, click Edit to enter your User Name and Password (refer to the Create User section below). Once you nish, click Done to continue. By default, User Name is “admin” and Password is blank. Note: If you set the password for the “admin” in your DIR-506L, you need to enter the password.8For the Movie section, click the Movie icon to play your movie from your USB ash drive.Note: iOS supports video formats such as MP4 and MOV. Android supports MP4 and MOV video formats. 9For the Music section, click the Music icon to play your music from your USB ash drive.Note: iOS support MP3 & WAV music formats. Android supports MP3 & WAV.10For the Photo section, click the Photo icon to open your photo from your USB ash drive.Note: iOS & Android both support the following image formats : JPG, BMP,GIF, PNG. 11For the Files section, click on the Files icon to open your le from your USB ash drive.Note: iOS and Android both support the following document formats: html, key, pages, numbers, txt, ref, doc, PPt, XIS, Pdf.12For the Folder section, click on the Folder icon to open a le from your USB ash drive. To upload a photo le from your mobile device to your USB go to + sign located on the upper right. SharePort Mobile - Create UserFor iOS devices For Android devicesiOS ShownSettingsMovieMusic Photo File Folder13Once you open a le, you may add this le to your Favorite folder by selecting the “Star” icon. For the Favorite section, click on the Favorite icon to open your favorite le from your USB ash drive.FavoriteInternetiOS ShownMake sure your laptop or mobile device connect to the DIR-506L. Enter http://192.168.0.1 in the URL, go to SETUP -> STORAGE. Make sure “Enable SharePort Web Access” is checked. Click Modify to modify the user settings. Then, click Browse to locate the folder you would like to use. Click OK to continue. Click on the folder you want to open (i.e. usb_A1). Select Read Only or Read/Write and Click Ok to continue. Once you complete all the setting, click Save Setting to continue.Create your own User Name and Password, then click Add/Edit to add your user name and password. LANONOFF5VLANONOFF5VSharePortLANONOFF5VSharePortLANONOFF5VLANONOFF5VSharePortLANONOFF5VSharePortConnect your device to your laptop to charge using a USB cable. Then, turn on the power switch and wait until the power LED turns green. iOS ShownRepeater Mode23451Go to the drop-down menu on Wireless Mode and select Repeater. Open a web browser and type http://192.168.0.1 in the address bar. Then, type admin as your user name and click Login. Go to Setup > Wireless Settings and click on Manual Wireless Connection Setup.Click on Site survey and select the Wireless Network from the AP List. Then, click Save to complete the setup. Router Mode ShownFrom your laptop or mobile device go to your Wireless Utility to display the available wireless networks and select the dlink_DIR-506L for the Wi-Fi name. The password should be left blank.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. The device complies with the FCC SAR limits set forth for an uncontrolled environment for body-worn configuration in direct contact to the phantom.Changes or modifications to this unit not expressly approved by the party responsible for compliance couldvoid the user authority to operate the equipment.

Navigation menu