D Link IR506LA1 Pocket Cloud Router User Manual

D Link Corporation Pocket Cloud Router

a href="https://usermanual.wiki/D-Link" itemprop="url"> D Link >

User Manual

Start Here - Select The ModeQuick Install GuidePackage ContentsIf any of the above items are missing, please contact your reseller.DIR-506LLEDsSharePort™ GoYour Mobile CompanionPower  LED  -  A  solid  amber  light  indicates  a proper  connection  to  the  power  supply.  The light  will  blink  green  when  the  USB  cable  is disconnected. Start HereSharePort Mobile AppScan this QR code using your mobile device to download the App and begin le sharing. Requirements: Compatible with iPhone, iPod touch and iPad. Requires iOS 4.3 or later.Router Mode Repeater Mode Wi-Fi Hotspot ModeThis  feature  allows  you  to  share  a  single  internet connection  with  multiple  devices  such  as  a  laptop, mobile phone, ipad, etc. It behaves as a router in areas where you cannot take your home router.This  feature  extends  your  wireless  coverage  allowing you to share your wireless signal with all your portable devices such as your mobile device or laptop. This provides your own private network from anywhere that  you  may  travel  and  allows  you  to  share  a  single connection  with  multiple  devices  (laptop,  mobile phone, Ipad etc.).Pleaser refer to the user manual for further information regarding SharePort Mobile App. Please download the user manual from http://www.dlink.com/support/2345Router Mode1Connect your device to your laptop to charge using a USB cable. Then, turn on the power switch and wait until the power LED turns green.  Connect one end of the Ethernet cable into the Ethernet port of the Internet-enabled device (e.g. modem) and then plug the other end of this cable into the Ethernet port of the DIR-506L.From your laptop or mobile device go to your Wireless Utility to display the available wireless networks and select the dlink_DIR-506L for the  Wi-Fi name. The password should be left blank. Open a web browser and type http://192.168.0.1 in the address bar.  Then, type admin as your user name and click Login. Go to Setup > Internet and click on Internet Connection Setup Wizard to run the wizard. InternetWelcome to the Setup Wizard please read the steps and click Next to continue. Select your Time Zone from the drop-down list and click Next to continue. Select the Internet connection type you would like to use. Then, click Next and follow the on-screen instructions to complete the  setup. Once you completed the setup, proceed to step 10.6789 10From  your laptop or mobile device go to your wireless utility to display the available wireless networks and select the network that you previously connected to for internet access.Choose a password to secure your networking device. Enter your new password under Password and Verify Password. Then, click Next. AP ModeSharePortSharePortSharePort SharePortNote: The SharePort Mobile App only works on Router and Wi-Fi Hotspot Mode. Use Access Point (AP) mode if you want to connect wireless clients (such as laptops, tablets, smartphones, and media players) to your wired network (via router, switch, or PowerLine devices).LANONOFF5VLANONOFF5VLANONOFF5VSharePortSharePortLANONOFF5VLANONOFF5VLANONOFF5VSharePortSharePort2345Wi-Fi Hot Spot Mode1Connect your device to your laptop to charge using a USB cable. Then, turn on the power switch and wait until the power LED turns green.  Verify if the Power LED is lit amber and Wi-Fi LED turn green. Open a web browser and type http://192.168.0.1 in the address bar.  Then, type admin as your user name and click Login. Go to Setup > Internet and click on Internet Connection Setup Wizard to run the wizard. Welcome to the Setup Wizard please read the steps and click Next to continue. Select your Time Zone from the drop-down list and click Next to continue. Select the Wi-Fi HotSpot and click Next. 6789 10From  your laptop or mobile device go to your wireless utility to display the available wireless networks and select the network that you previously  connected to for internet access.Choose a password to secure your networking device. Then, enter your new password under Password and Verify Password. Click Next. LANONOFF5VLANONOFF5VLANONOFF5VSharePortNote: the USB cable is only for power. It does not transmit data. USB LED - A solid green light indicates that the USB  cable  is  attached.    A  ashing  green  will indicate access to a le is being transmitted. Wi-Fi LED - A blinking green light will indicate data is being transmitted. Select the wireless network you would like to connect to and click Select. Then, enter your Pre-Shared Key information. Click Next and follow the on-screen instructions to  complete the setup and proceed to Step 10.Ethernet  LED  -  A  green  light  indicates  the Ethernet  connection  has  been  established. A  blinking  green  indicates  data  is  being transferred. IOSAndroidFrom your laptop or mobile device go to your Wireless Utility to display the available wireless networks and select the dlink_DIR-506L for the  Wi-Fi name. The password should be left blank. Ethernet CableBatteryPlease make sure you insert the battery before using the DIR-506L.SharePort™ GoYour Mobile CompanionUSB cable
Download:
Mirror Download [FCC.gov]
Document ID1808592
Application IDNHsytBeWoaHzBZKRURHeCQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize259.89kB (3248585 bits)
Date Submitted2012-10-05 00:00:00
Date Available2012-10-05 00:00:00
Creation Date2012-07-10 15:42:27
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2012-10-05 11:39:44
Document TitleUser Manual
Document CreatorAdobe InDesign CS4 (6.0.6)
FCC ID Filing: KA2IR506LA1

Navigation menu