D Link IR515A1 Wireless N Router User Manual

D Link Corporation Wireless N Router

user manual

DIR-515A1ENGLISHQuick Install GuideWireless N 300 RouterThank you for purchasing the DIR-515A1 Wireless N 300 Router. Follow the easy steps in this guide to properly set up your router. Please verify that all the package contents listed below are available.Technical SupportHaving trouble installing your new product? D-Link’s website contains the latest user documentation and software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support through our website or by phone.United StatesTelephone: (877) 453-5465Internet: http://support.dlink.comCanadaTelephone: (800) 361-5265Internet: http://support.dlink.caVersion 1.0 | August 03, 2010 6IR515Q...01GPower LEDA solid light indicates a proper connection to the power supply.Internet LEDA solid light indicates connection on the Internet port. This LED blinks during data transmission.WLAN LEDA solid light indicates that the wireless segment is ready. This LED blinks during wireless data transmission.LAN LEDs (1-4)A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4. This LED blinks during data transmission.LEDsStep 5From the computer you connected to the router, open a web browser and enter http://192.168.0.1. Then, press Enter and you will be directed to the D-Link Setup Wizard page. Step 6Follow the on-screen instructions to congure your D-Link router.Before You Begin• You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn o your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet). • If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.• Make sure to use the computer you were connected to the Internet with.Package ContentsIf any of the above items are missing, please contact your reseller.DIR-515A1 Wireless N 300 RouterEthernet CablePower AdapterRouter InstallationStep 1Position your router close to your modem and the computer that is already online. Place this router in an open area of your intended work area for better wireless coverage. Step 2Unplug the Ethernet cable from your modem that is connected to your computer. Plug it into the blue port labled 1 on the back of your router. The router is now connected to your computer.Step 3Plug one end of the included Ethernet cable that came with your router into the port labeled INTERNET on the back of the router. Plug the other end of this cable into the Ethernet port on your modem.Step 4Connect the supplied power adapter into the power port on the back of the router and then plug into a power outlet or surge protector. Verify the power light is lit.Below is a basic network setup.DIR-515A1 R outerBroadband ModemWireless LaptopDesktop ComputerRouter PlacementTo get the best wireless coverage, place your router in an open area away from your computer, monitor, and speakers. Try to position the router so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal. 5V-- -3A1 2 LAN 3 4 INTERNET RESETINTERNETCopyright ©2010 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely aect wireless signal range. Product specications, size and shape are subject to change without notice, and actual product appearance may dier from that depicted on the packaging. Visit www.dlink.com for more details.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note to US model owner: To comply with US FCC regulation, the country selection function has been completely removed from all US models. The above function is for non-US models only.
The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.

Navigation menu