D Link IR615H1 Wireless N Home Router User Manual UserMan KA2IR615H1

Download:
Mirror Download [FCC.gov]
Document ID	1444888
Application ID	tHBQrWAEBjCbGsfeq4C9GA==
Document Description	UserMan_KA2IR615H1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	330.42kB (4130246 bits)
Date Submitted	2011-04-07 00:00:00
Date Available	2011-04-07 00:00:00
Creation Date	2011-03-24 14:32:36
Producing Software	PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)]
Document Lastmod	2011-04-01 16:07:58
Document Title	UserMan_KA2IR615H1
Document Creator	Adobe InDesign CS4 (6.0.6)

Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to
notify any person or organization of such revisions or changes.
Manual Revisions
Revision
Date
Description
8.0
November 08, 2010
• Updated for revision H1
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the
United States or other countries. Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Vista, and
Microsoft Windows 7 are registered trademarks of the Microsoft Corporation. All other company or product names
mentioned herein are trademarks or registered trademarks of their respective companies.
Copyright © 2011 by D-Link Systems, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission
from D-Link Systems, Inc.
D-Link DIR-615H1 User Manual
Table of Contents
Table of Contents
Preface........................................................................... i
Manual Revisions...................................................... i
Trademarks............................................................... i
Product Overview......................................................... 1
Package Contents.................................................... 1
System Requirements.............................................. 2
Features................................................................... 3
Hardware Overview.................................................. 4
Connections........................................................ 4
LEDs................................................................... 5
Installation..................................................................... 6
Before you Begin...................................................... 6
Wireless Installation Considerations......................... 7
Network Diagram...................................................... 8
Connect to Cable/DSL/Satellite Modem................... 9
Connect to Another Router..................................... 10
Getting Started....................................................... 12
Configuration.............................................................. 13
Web-based Configuration Utility............................. 13
Internet Connection Setup Wizard.................... 14
Manual Configuration........................................ 19
Dynamic (Cable)........................................... 19
PPPoE (DSL)................................................ 21
PPTP............................................................. 23
L2TP.............................................................. 25
Static IP Address........................................... 27
D-Link DIR-615H1 User Manual
Wireless Settings.............................................. 28
Manual Wireless Network Setup................... 29
Network Settings............................................... 31
DHCP Server Settings.................................. 32
DHCP Reservation........................................ 33
Virtual Server.................................................... 35
Port Forwarding................................................ 37
Application Rules.............................................. 38
QoS Engine...................................................... 39
Network Filters.................................................. 40
Access Control.................................................. 41
Access Control Wizard.................................. 41
Website Filters.................................................. 44
Inbound Filters.................................................. 45
Firewall Settings............................................... 46
Routing ............................................................ 47
Advanced Wireless Settings............................. 48
Advanced Network Settings.............................. 49
UPnP............................................................. 49
Internet Ping Block........................................ 49
Internet Port Speed....................................... 49
Multicast Streams.......................................... 49
IPv6................................................................... 50
Link-Local Connectivity................................. 50
Static IPv6 (Stateful)..................................... 51
Static IPv6 (Stateless)................................... 52
ii
Table of Contents
DHCPv6 (Stateful)......................................... 53
DHCPv6 (Stateless)...................................... 54
IPv6 over PPPoE (Stateful)........................... 55
IPv6 over PPPoE (Stateless)........................ 57
6 to 4 Tunneling (Stateful)............................. 59
6 to 4 Tunneling (Stateless).......................... 60
IPv6 in IPv4 Tunneling (Stateful)................... 61
IPv6 in IPv4 Tunneling (Stateless)................ 62
Stateless Autoconfiguration (Stateless)........ 63
Stateless Autoconfiguration (Stateful)........... 64
Administrator Settings....................................... 65
Change Password......................................... 65
Remote Management.................................... 65
Time Settings.................................................... 66
SysLog.............................................................. 67
E-mail Settings.................................................. 68
System Settings................................................ 69
Update Firmware.............................................. 70
DDNS................................................................ 71
System Check................................................... 72
Schedules......................................................... 73
Device Information............................................ 74
Log.................................................................... 76
Statistics........................................................... 77
Internet Sessions.............................................. 78
Routing Table................................................... 80
Wireless............................................................ 81
IPv6................................................................... 82
D-Link DIR-615H1 User Manual
Support............................................................. 83
Wireless Security....................................................... 84
What is WPA?........................................................ 84
Wireless Network Setup Wizard............................. 85
Add Wireless Device with WPS Wizard.................. 88
Configure WPA-Personal (PSK)............................. 89
Configure WPA-Enterprise (RADIUS).................... 90
Connect to a Wireless Network.............................. 92
Using Windows® 7............................................ 92
Configure WPS............................................. 95
Using Windows Vista®...................................... 99
Configure WPA/WPA2................................ 100
Connect Using WCN 2.0................................. 102
Using Windows® XP........................................ 103
Using Windows® XP Through WPA-PSK........ 104
Troubleshooting....................................................... 106
Wireless Basics........................................................ 110
What is Wireless?................................................. 111
Tips....................................................................... 113
Wireless Modes.................................................... 114
Networking Basics................................................... 115
Check your IP address......................................... 115
Statically Assign an IP address............................ 116
Technical Specifications......................................... 117
iii
Section 1 - Product Overview
Product
PackageOverview
Contents
D-Link DIR-615H1 Wireless N
Home Router
Power Adapter
Ethernet Cable
CD-ROM
Note: Using a power supply with a different voltage rating than the one included with the DIR-615H1 will cause damage and void the warranty for
this product.
D-Link DIR-615H1 User Manual
Section 1 - Product Overview
System Requirements
Network Requirements
• An Ethernet-based Cable or DSL modem
• IEEE 802.11n/g wireless clients
• 10/100 Ethernet
Computer with the following:
• Windows®, Macintosh, or Linux-based operating
system
• An installed Ethernet adapter
Web-based Configuration
Utility Requirements
Browser Requirements:
• Internet Explorer 6 or higher
• Chrome 2.0 or higher
• Firefox 3.0 or higher
• Safari 3.0 or higher
Windows® Users: Make sure you have the latest version
of Java installed. Visit www.java.com to download the
latest version.
CD Installation Wizard
Requirements
D-Link DIR-615H1 User Manual
Computer with the following:
• Windows® XP (Service Pack 3), Vista® or
Windows® 7
• An installed Ethernet adapter
• CD-ROM drive
Section 1 - Product Overview
Features
• Faster Wireless Networking - The DIR-615H1 provides up to 300Mbps* wireless connection with other
802.11n wireless clients. This capability allows users to participate in real-time activities online, such as
video streaming, online gaming, and real-time audio.
• Compatible with 802.11g Devices - The DIR-615H1 is still fully compatible with the IEEE 802.11g
standard, so it can connect with existing 802.11g PCI, USB and Cardbus adapters.
• Advanced Firewall Features - The Web-based user interface displays a number of advanced network
management features including:
• Content Filtering - Easily applied content filtering based on MAC Address, URL, and/or
Domain Name.
• Filter Scheduling - These filters can be scheduled to be active on certain days or for a
duration of hours or minutes.
• Secure Multiple/Concurrent Sessions - The DIR-615H1 can pass through VPN sessions. It
supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-615H1
can securely access corporate networks.
• User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DIR-615H1 lets
you control what information is accessible to those on the wireless network, whether from the Internet or
from your company’s server. Configure your router to your specific settings within minutes.
* Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions
will adversely affect wireless signal range.
D-Link DIR-615H1 User Manual
Section 1 - Product Overview
Hardware Overview
Connections
Internet Port
The auto MDI/MDIX Internet port
is the connection for the Ethernet
cable to the cable or DSL modem.
LAN Ports (1-4)
Connect Ethernet devices such as
computers, switches, and hubs.
D-Link DIR-615H1 User Manual
Power Receptor
Receptor for the supplied
power adapter.
Reset
Pressing the Reset button restores the router to
its original factory default settings.
Section 1 - Product Overview
Hardware Overview
LEDs
WLAN LED
A solid light indicates that the wireless
segment is ready. This LED blinks
during wireless data transmission.
Internet LED
A solid light indicates connection on
the Internet port. This LED blinks
during data transmission.
Power LED
A solid light indicates a
proper connection to the
power supply.
D-Link DIR-615H1 User Manual
Local Network LEDs
A solid light indicates a connection to an
Ethernet-enabled computer on ports 1-4.
This LED blinks during data transmission.
Section 2 - Installation
Installation
This section will walk you through the installation process. Placement of the router is very important. Do not place the
router in an enclosed area such as a closet, cabinet, or in the attic or garage.
Before you Begin
• Please configure the router with the computer that was last connected directly to your modem.
• You can only use the Ethernet port on your modem. If you were using the USB connection before using
the router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable
to the Internet port on the router, and then turn the modem back on. In some cases, you may need to
call your ISP to change connection types (USB to Ethernet).
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software
such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to
the Internet.
• When running the Setup Wizard from the D-Link CD, make sure the computer you are running the CD
from is connected to the Internet and online or the wizard will not work. If you have disconnected any
hardware, re-connect your computer back to the modem and make sure you are online.
D-Link DIR-615H1 User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within
the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of
walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary
depending on the types of materials and background RF (radio frequency) noise in your home or business. The key
to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a
minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position
your devices so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a
45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet
(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead
of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on
range. Try to position access points, wireless routers, and computers so that the signal passes through
drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water
(fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that
generate RF noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and
home security systems), your wireless connection may degrade dramatically or drop completely. Make
sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits
a signal even if the phone in not in use.
D-Link DIR-615H1 User Manual
Section 2 - Installation
Network Diagram
D-Link DIR-615H1 User Manual
Section 2 - Installation
Connect to Cable/DSL/Satellite Modem
If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:
1. Place the router in an open and central location. Do not plug the power adapter into the router.
2. Turn the power off on your modem. If there is no on/off switch, then unplug the modem’s power adapter. Shut down
your computer.
3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the
Internet port on the router.
4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port on
your computer.
5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).
6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the router
to boot.
7. Turn on your computer.
8. Verify the link lights on the router. The power light, Internet light, and the LAN light (the port that your computer is
plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable
connections are correct.
9. Skip to page 13 to configure your router.
D-Link DIR-615H1 User Manual
Section 2 - Installation
Connect to Another Router
If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have
to do the following before connecting the router to your network:
• Disable UPnP™
• Disable DHCP
• Change the LAN IP address to an available address on your network. The LAN ports on the router cannot
accept a DHCP address from your other router.
To connect to another router, please follow the steps below:
1. Plug the power into the router. Connect one of your computers to the router (LAN port) using an Ethernet cable.
Make sure your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the
Networking Basics section for more information. If you need to change the settings, write down your existing settings
before making any changes. In most cases, your computer should be set to receive an IP address automatically in
which case you will not have to do anything to your computer.
2. Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user
name to Admin and leave the password box empty. Click Log In to continue.
3. Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settings
to continue.
4. Click Setup and then click Network Settings. Uncheck the Enable DHCP Server server checkbox. Click Save
Settings to continue.
5. Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save Settings to
save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the
browser and change your computer’s IP settings back to the original values as in Step 1.
D-Link DIR-615H1 User Manual
10
Section 2 - Installation
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network.
7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug
anything into the Internet port of the D-Link router.
8. You may now use the other 3 LAN ports to connect other Ethernet devices and computers. To configure your wireless
network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and
Wireless Security sections for more information on setting up your wireless network.
D-Link DIR-615H1 User Manual
11
Section 2 - Installation
Getting Started
The DIR-615H1 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard
to guide you quickly through the installation process. Insert the Wizard CD in the CD-ROM drive. The step-by-step
instructions that follow are shown in Windows® XP. The steps and screens are similar for the other Windows operating
systems.
If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type
“D:\WIZARD.exe” (where D: represents the drive letter of your CD-ROM drive). When the autorun screen appears,
click Start.
Note: It is recommended to write down the SSID and Security Key, followed by the login password on the provided
CD holder.
D-Link DIR-615H1 User Manual
12
Section 3 - Configuration
Configuration
This section will show you how to configure your new D-Link wireless router using the web-based configuration utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser such
as Internet Explorer and enter the IP address of the router
(192.168.0.1).
You may also connect using the NetBIOS name in the
address bar (http://dlinkrouter).
Select Admin from the drop-down menu and then enter your
password. Leave the password blank by default. Type in the
graphical authentication code (if you cannot read it, click
Regenerate). The graphical authentication will be disabled
by default.
If you get a Page Cannot be Displayed error, please refer
to the Troubleshooting section for assistance.
D-Link DIR-615H1 User Manual
13
Section 3 - Configuration
Internet Connection Setup Wizard
Once logged into the web interface of the router, the Setup > Internet page will appear. Click the Internet Connection
Setup Wizard button to quickly configure your router using the setup wizard.
If you want to enter your settings without running the wizard, click Manual Internet Configuration Wizard and skip
to page 19.
D-Link DIR-615H1 User Manual
14
Section 3 - Configuration
Click Next to continue.
Create a new password and then click Next to
continue.
Select your time zone from the drop-down menu and
then click Next to continue.
D-Link DIR-615H1 User Manual
15
Section 3 - Configuration
Select the type of Internet connection you use and
then click Next to continue.
If you selected Dynamic, you may need to enter the
MAC address of the computer that was last connected
directly to your modem. If you are currently using that
computer, click Clone Your PC’s MAC Address and
then click Next to continue.
The Host Name is optional but may be required by
some ISPs. The default host name is the device
name of the Router and may be changed.
D-Link DIR-615H1 User Manual
16
Section 3 - Configuration
If you selected PPPoE, enter your PPPoE username
and password. Click Next to continue.
Select Static if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses.
Note: Make sure to remove your PPPoE software
from your computer. The software is no longer
needed and will not work through a router.
If you selected PPTP, enter your PPTP username
and password. Click Next to continue.
D-Link DIR-615H1 User Manual
17
Section 3 - Configuration
If you selected L2TP, enter your L2TP username
and password. Click Next to continue.
If you selected Static, enter your network settings
supplied by your Internet provider. Click Next to
continue.
The Setup is now complete. Click the Connect to
save your settings. Please allow 1-2 minutes to
connect.
D-Link DIR-615H1 User Manual
18
Section 3 - Configuration
Manual Configuration
Dynamic (Cable)
If you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to select
your Internet type and enter the correct configuration parameters.
Select your Internet connection type using the “My Internet
Connection is” drop-down menu.
Click the Save Settings button when you have configured the
connection.
My Internet Select Dynamic IP (DHCP) to obtain IP Address information
Connection: automatically from your ISP. Select this option if your ISP does not
give you any IP numbers to use. This option is commonly used for
cable modem services such as Comcast and Cox.
Enable Advanced Domain Name System (DNS) services enhances your
Advanced Internet performance by getting you the information and web pages
DNS Service: you are looking for faster and more reliably. In addition, it improves
your overall Internet experience by correcting many common typo mistakes automatically, taking you where you intended to go
and saving you valuable time.
Disclaimer: D-Link makes no warranty as to the availability, reliability, functionality and operation of the Advanced DNS service or its features.
Host Name: The Host Name is optional but may be required by some ISPs. Leave blank if you are not sure.
Use Check the box if you are having problems obtaining an IP address from your ISP.
Unicasting:
Primary/ Enter the Primary and secondary DNS server IP addresses assigned by your ISP. These addresses are usually obtained
Secondary automatically from your ISP. Leave at 0.0.0.0 if you did not specifically receive these from your ISP.
DNS Server:
D-Link DIR-615H1 User Manual
19
Section 3 - Configuration
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is
the default MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s
MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
D-Link DIR-615H1 User Manual
20
Section 3 - Configuration
PPPoE (DSL)
Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide
you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE
software from your computer. The software is no longer needed and will not work through a router.
My Internet Select PPPoE (Username/Password) from
Connection: the drop-down menu.
Address Mode: Select Static if your ISP assigned you the IP
address, subnet mask, gateway, and DNS
server addresses. In most cases, select
Dynamic.
IP Address: Enter the IP address (Static PPPoE only).
User Name: Enter your PPPoE user name.
Password: Enter your PPPoE password and then retype
the password in the next box.
Service Name: Enter the ISP Service Name (optional).
Reconnection Mode: Select either Always-on, On-Demand, or
Manual.
Maximum Idle Time: Enter a maximum idle time during which the
Internet connection is maintained during
inactivity. To disable this feature, enable Autoreconnect.
DNS Addresses: Enter the Primary and Secondary DNS Server
Addresses (Static PPPoE only).
D-Link DIR-615H1 User Manual
21
Section 3 - Configuration
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is
the default MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s
MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
D-Link DIR-615H1 User Manual
22
Section 3 - Configuration
PPTP
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with
a username and password. This option is typically used for DSL services.
Address Mode: Select Static if your ISP assigned you the IP
address, subnet mask, gateway, and DNS server
addresses. In most cases, select Dynamic.
PPTP IP Address: Enter the IP address (Static PPTP only).
PPTP Subnet Enter the Primary and Secondary DNS Server
Mask: Addresses (Static PPTP only).
PPTP Gateway: Enter the Gateway IP Address provided by your
ISP.
PPTP Server IP: Enter the Server IP provided by your ISP
(optional).
Username: Enter your PPTP username.
Password: Enter your PPTP password and then retype the
password in the next box.
Reconnect Mode: Select either Always-on, On-Demand, or
Manual.
Maximum Idle Enter a maximum idle time during which the
Time: Internet connection is maintained during
inactivity. To disable this feature, enable Autoreconnect.
DNS Servers: The DNS server information will be supplied by your ISP (Internet Service Provider.)
D-Link DIR-615H1 User Manual
23
Section 3 - Configuration
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400
is the default MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s
MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
D-Link DIR-615H1 User Manual
24
Section 3 - Configuration
L2TP
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a
username and password. This option is typically used for DSL services.
Address Mode: Select Static if your ISP assigned you the IP
address, subnet mask, gateway, and DNS
server addresses. In most cases, select
Dynamic.
L2TP IP Address: Enter the L2TP IP address supplied by your
ISP (Static only).
L2TP Subnet Enter the Subnet Mask supplied by your ISP
Mask: (Static only).
L2TP Gateway: Enter the Gateway IP Address provided by
your ISP.
L2TP Server IP: Enter the Server IP provided by your ISP
(optional).
Username: Enter your L2TP username.
Password: Enter your L2TP password and then retype
the password in the next box.
Reconnect Mode: Select either Always-on, On-Demand, or
Manual.
Maximum Idle Enter a maximum idle time during which the
Time: Internet connection is maintained during
inactivity. To disable this feature, enable Autoreconnect.
DNS Servers: Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).
D-Link DIR-615H1 User Manual
25
Section 3 - Configuration
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is
the default MTU.
Clone MAC The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not
Address: recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s
MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
D-Link DIR-615H1 User Manual
26
Section 3 - Configuration
Static IP Address
Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP address,
subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
IP Address: Enter the IP address assigned by your ISP.
Subnet Mask: Enter the Subnet Mask assigned by your ISP.
Default Gateway: Enter the Gateway assigned by your ISP.
DNS Servers: The DNS server information will be supplied
by your ISP (Internet Service Provider.)
MTU: Maximum Transmission Unit - you may need
to change the MTU for optimal performance
with your specific ISP. 1500 is the default MTU.
MAC Address: The default MAC Address is set to the Internet
port’s physical interface MAC address on the
Broadband Router. It is not recommended that
you change the default MAC address unless
required by your ISP. You can use the Clone
Your PC’s MAC Address button to replace
the Internet port’s MAC address with the MAC
address of your Ethernet card.
D-Link DIR-615H1 User Manual
27
Section 3 - Configuration
Wireless Settings
If you want to configure the wireless settings on your
router using the wizard, click Wireless Network Setup
Wizard and refer to page 85.
Click Add Wireless Device with WPS if you want to
add a wireless device using Wi-Fi Protected Setup
(WPS) and refer to page 88.
If you want to manually configure the wireless settings
on your router click Manual Wireless Network Setup
and refer to the next page.
D-Link DIR-615H1 User Manual
28
Section 3 - Configuration
Manual Wireless Network Setup
Enable Wireless: Check the box to enable the wireless function. If
you do not want to use wireless, uncheck the box
to disable all the wireless functions. Click Add
New to create your own time schedule to enable
the wireless function.
Wireless Network Service Set Identifier (SSID) is the name of your
Name: wireless network. Create a name using up to 32
characters. The SSID is case-sensitive.
802.11 Mode: Select one of the following:
802.11g Only - Select if all of your wireless
clients are 802.11g.
Mixed 802.11g and 802.11b - Select if you
are using both 802.11b and 802.11g wireless
clients.
802.11b Only - Select if all of your wireless
clients are 802.11b.
802.11n Only - Select only if all of your wireless
clients are 802.11n.
Mixed 802.11n, 802.11b, and 802.11g - Select
if you are using a mix of 802.11n, 11g, and 11b
wireless clients.
Mixed 802.11n and 802.11g - Select if you are
using a mix of 802.11n and 802.11g wireless
clients.
Enable Auto The Auto Channel Scan setting can be selected to allow the DIR-615H1 to choose the channel with the least amount of
Channel Scan: interference.
Wireless Channel: Indicates the channel setting for the DIR-615H1. By default the channel is set to 6. The Channel can be changed to fit the
channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan,
this option will be greyed out.
D-Link DIR-615H1 User Manual
29
Section 3 - Configuration
Transmission Rate: Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance.
Channel Width: Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting.
Visibility Status: Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-615H1. If Invisible is
selected, the SSID of the DIR-615H1 will not be seen by Site Survey utilities so your wireless clients will have to know the
SSID of your DIR-615H1 in order to connect to it.
Wireless Security: Refer to page 84 for more information regarding wireless security.
D-Link DIR-615H1 User Manual
30
Section 3 - Configuration
Network Settings
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
IP Address: Enter the IP address of the router. The default IP
address is 192.168.0.1.
If you change the IP address, once you click Apply, you
will need to enter the new IP address in your browser
to get back into the configuration utility.
Subnet Mask: Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Local Domain: Enter the Domain name (Optional).
Enable DNS Relay: Uncheck the box to transfer the DNS server information
from your ISP to your computers. If checked, your
computers will use the router for a DNS server.
D-Link DIR-615H1 User Manual
31
Section 3 - Configuration
DHCP Server Settings
DHCP stands for Dynamic Host Control Protocol. The DIR-615H1 has a built-in DHCP server. The DHCP Server will
automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be
DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on,
they will automatically load the proper TCP/IP settings provided by the DIR-615H1. The DHCP Server will automatically
allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and
ending address of the IP address pool.
Enable DHCP Check this box to enable the DHCP server on your router.
Server: Uncheck to disable this function.
DHCP IP Enter the starting and ending IP addresses for the DHCP
Address Range: server’s IP assignment.
Note: If you statically (manually) assign IP addresses to your
computers or devices, make sure the IP addresses are outside
of this range or you may have an IP conflict.
Lease Time: The length of time for the IP address lease. Enter the Lease
time in minutes.
Always Enable this function to ensure compatibility with some DHCP
Broadcast: clients.
Learn NetBIOS If NetBIOS advertisement is switched on, switching this setting
WAN: on causes WINS information to be learned from the WAN side, if available. Turn this setting off to configure manually.
Net BIOS scope: This is an advance setting and is normally left blank. This allows the configuration of NetBIOS domain name under which
network hosts operate. This setting has no effect if the “ Learn NetBIOS information form WAN is activated.
D-Link DIR-615H1 User Manual
32
Section 3 - Configuration
DHCP Reservation
If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation.
The router will assign the IP address only to that computer or device.
Note: This IP address must be within the DHCP IP Address Range.
Enable: Check this box to enable the reservation.
Computer Name: Enter the computer name or select from the dropdown menu and click <<.
IP Address: Enter the IP address you want to assign to the
computer or device. This IP Address must be
within the DHCP IP Address Range.
MAC Address: Enter the MAC address of the computer or device.
If you want to assign an IP address to the
Copy Your PC’s computer you are currently on, click this button
MAC Address: to populate the fields.
Click Save to save your entry. You must click Save
Save: Settings at the top to activate your reservations.
Number of
Dynamic DHCP
Clients:
In this section you can see what LAN devices are
currently leasing IP addresses.
Click Revoke to cancel the lease for a specific LAN device and free an entry in the lease table. Do this only if the device
Revoke: no longer needs the leased IP address, because, for example, it has been removed from the network.
Note: The Revoke option will not disconnect a PC with a current network session from the network; you would need to use MAC Address
D-Link DIR-615H1 User Manual
33
Section 3 - Configuration
Filter to do that. Revoke will only free up a DHCP Address for the very next requester. If the previous owner is still available, those
two devices may both receive an IP Address Conflict error, or the second device may still not receive an IP Address; in that case,
you may still need to extend the “DHCP IP Address Range” to address the issue, it is located in the DHCP Server section.
Reserve:
The Reserve option converts this dynamic IP allocation into a DHCP Reservation and adds the corresponding entry to the
DHCP Reservations List.
D-Link DIR-615H1 User Manual
34
Section 3 - Configuration
Virtual Server
The DIR-615H1 can be configured as a virtual server so that remote users accessing Web or FTP services via the
public IP address can be automatically redirected to local servers in the LAN (Local Area Network).
The DIR-615H1 firewall feature filters out unrecognized
packets to protect your LAN network so all computers
networked with the DIR-615H1 are invisible to the
outside world. If you wish, you can make some of
the LAN computers accessible from the Internet by
enabling Virtual Server. Depending on the requested
service, the DIR-615H1 redirects the external service
request to the appropriate server within the LAN
network.
The DIR-615H1 is also capable of port-redirection
meaning incoming traffic to a particular port may be
redirected to a different port on the server computer.
Each virtual service that is created will be listed at the
bottom of the screen in the Virtual Servers List. There are
pre-defined virtual services already in the table. You may use them by enabling them and assigning the server IP to
use that particular virtual service.
For a list of ports for common applications, please visit http://support.dlink.com/faq/view.asp?prod_id=1191.
D-Link DIR-615H1 User Manual
35
Section 3 - Configuration
This will allow you to open a single port. If you would like to open a range of ports, refer to the next page.
Name: Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click << to populate the fields.
IP Address: Enter the IP address of the computer on your
local network that you want to allow the incoming
service to. If your computer is receiving an IP
address automatically from the router (DHCP), you
computer will be listed in the “Computer Name”
drop-down menu. Select your computer and click
<<.
Private Port/ Enter the port that you want to open next to Private
Public Port: Port and Public Port. The private and public ports
are usually the same. The public port is the port
seen from the Internet side, and the private port
is the port being used by the application on the
computer within your local network.
Protocol Type: Select TCP, UDP, Both or Other from the dropdown menu.
Inbound Filter: Select Allow All (most common) or a created
Inbound filter. You may create your own inbound
filters in the Advanced > Inbound Filter page.
Schedule: The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the
particular service to always be enabled. You can create your own times in the Tools > Schedules section.
D-Link DIR-615H1 User Manual
36
Section 3 - Configuration
Port Forwarding
This will allow you to open a single port or a range of ports.
Name: Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click << to populate the fields.
IP Address: Enter the IP address of the computer on your local
network that you want to allow the incoming service
to. If your computer is receiving an IP address
automatically from the router (DHCP), you computer
will be listed in the “Computer Name” drop-down
menu. Select your computer and click <<.
TCP/UDP: Enter the TCP and/or UDP port or ports that you
want to open. You can enter a single port or a range
of ports. Separate ports with a common.
Example: 24,1009,3000-4000
Inbound Filter: Select Allow All (most common) or a created
Inbound filter. You may create your own inbound
filters in the Advanced > Inbound Filter page.
Schedule: The schedule of time when the Virtual Server Rule
will be enabled. The schedule may be set to Always,
which will allow the particular service to always
be enabled. You can create your own times in the
Tools > Schedules section.
D-Link DIR-615H1 User Manual
37
Section 3 - Configuration
Application Rules
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and
others. These applications have difficulties working through NAT (Network Address Translation). Special Applications
makes some of these applications work with the DIR-615H1. If you need to run applications that require multiple
connections, specify the port normally associated with an application in the “Trigger Port” field, select the protocol type
as TCP or UDP, then enter the firewall (public) ports associated with the trigger port to open them for inbound traffic.
The DIR-615H1 provides some predefined applications in the table on the bottom of the web page. Select the application
you want to use and enable it.
Name: Enter a name for the rule. You may select a
pre-defined application from the drop-down
menu and click <<.
Trigger: This is the port used to trigger the application. It
can be either a single port or a range of ports.
Traffic Type: Select the protocol of the trigger port (TCP,
UDP, or Both).
Firewall: This is the port number on the Internet side that
will be used to access the application. You may
define a single port or a range of ports. You
can use a comma to add multiple ports or port
ranges.
Traffic Type: Select the protocol of the firewall port (TCP,
UDP, or Any).
Schedule: The schedule of time when the Application Rule
will be enabled. The schedule may be set to
Always, which will allow the particular service
to always be enabled. You can create your own
times in the Tools > Schedules section.
D-Link DIR-615H1 User Manual
38
Section 3 - Configuration
QoS Engine
The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the
QoS Engine settings are disabled and application priority is not classified automatically.
Enable QoS Engine: This option is disabled by default. Enable this
option for better performance and experience
with online games and other interactive
applications, such as VoIP.
Automatic Uplink This option is enabled by default when the
Speed: QoS Engine option is enabled. This option will
allow your router to automatically determine
the uplink speed of your Internet connection.
Measured Uplink This displays the detected uplink speed.
Speed:
Manual Uplink The speed at which data can be transferred
Speed: from the router to your ISP. This is determined
by your ISP. ISP’s offer speed as a download/
upload pair. For example, 1.5Mbits/284Kbits. Using this example, you would enter 284. Alternatively you can test your uplink
speed with a service such as www.dslreports.com.
D-Link DIR-615H1 User Manual
39
Section 3 - Configuration
Network Filters
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the Broadband Router.
Configure MAC Select Turn MAC Filtering Off, allow MAC
Filtering: addresses listed below, or deny MAC addresses
listed below from the drop-down menu.
MAC Address: Enter the MAC address you would like to filter.
To find the MAC address on a computer, please
refer to the Networking Basics section in this
manual.
DHCP Client: Select a DHCP client from the drop-down menu
and click << to copy that MAC Address.
D-Link DIR-615H1 User Manual
40
Section 3 - Configuration
Access Control
The Access Control section allows you to control access in and out of your network. Use this feature as Parental
Controls to only grant access to approved sites, limit web access based on time or dates, and/or block access from
applications like P2P utilities or games.
Add Policy: Check the Enable Access Control check box
and click the Add Policy button to start the
Access Control Wizard.
Access Control Wizard
Click Next to continue with the wizard.
D-Link DIR-615H1 User Manual
41
Section 3 - Configuration
Enter a name for the policy and then click Next to
continue.
Select a schedule (I.E. Always) from the drop-down
menu and then click Next to continue.
Enter the following information and then click Next
to continue.
• Address Type - Select IP address, MAC address,
or Other Machines.
• IP Address - Enter the IP address of the computer
you want to apply the rule to.
D-Link DIR-615H1 User Manual
42
Section 3 - Configuration
Select the filtering method and then click Next to
continue.
Enter the rule:
Enable - Check to enable the rule.
Name - Enter a name for your rule.
Dest IP Start - Enter the starting IP address.
Dest IP End - Enter the ending IP address.
Protocol - Select the protocol.
Dest Port Start - Enter the starting port number.
Dest Port End - Enter the ending port number.
To enable web logging, click Enable.
Click Save to save the access control rule.
D-Link DIR-615H1 User Manual
43
Section 3 - Configuration
Website Filters
Website Filters are used to allow you to set up a list of allowed Web sites that can be used by multiple users through
the network. To use this feature select to Allow or Deny, enter the domain or website and click Add, and then click
Save Settings. You must also select Apply Web Filter under the Access Control section (page 41).
Configure Website Select Deny or Allow computers access to
Filter Below: only these sites.
Clear the list Click to delete all entries in the list.
below:
Website URL/ Enter the keywords or URLs that you want to
Domain: allow or deny.
D-Link DIR-615H1 User Manual
44
Section 3 - Configuration
Inbound Filters
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you
can configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used
with Virtual Server, Port Forwarding, or Remote Administration features.
Name: Enter a name for the inbound filter rule.
Action: Select Allow or Deny.
Enable: Check to enable rule.
Source IP Start: Enter the starting IP address. Enter 0.0.0.0 if
you do not want to specify an IP range.
Source IP End: E n t e r t h e e n d i n g I P a d d r e s s . E n t e r
255.255.255.255 if you do not want to specify
and IP range.
Save: Click the Save button to apply your settings.
You must click Save Settings at the top to
save the settings.
Inbound Filter This section will list any rules that are created.
Rules List: You may click the Edit icon to change the
settings or enable/disable the rule, or click the
Delete icon to remove the rule.
D-Link DIR-615H1 User Manual
45
Section 3 - Configuration
Firewall Settings
A firewall protects your network from the outside world. The D-Link DIR-615H1 offers a firewall type functionality. The SPI feature helps
prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain types of applications. If you choose
to expose a computer, you can enable DMZ. DMZ is short for Demilitarized Zone. This option will expose the chosen computer completely
to the outside world.
Enable SPI: SPI (Stateful Packet Inspection, also known as dynamic
packet filtering) helps to prevent cyber attacks by tracking
more state per session. It validates that the traffic passing
through the session conforms to the protocol.
Enable Anti-Spoof Enable this option to provide protection from certain kinds of
Checking: “spoofing” attacks.
Enable DMZ Host: If an application has trouble working from behind the router,
you can expose one computer to the Internet and run the
application on that computer.
Note: Placing a computer in the DMZ may expose that
computer to a variety of security risks. Use of this option is
only recommended as a last resort.
IP Address: Specify the IP address of the computer on the LAN that you
want to have unrestricted Internet communication. If this
computer obtains its IP address automatically using DHCP, be sure to make a static reservation on the System > Network
Settings page so that the IP address of the DMZ machine does not change.
D-Link DIR-615H1 User Manual
46
Section 3 - Configuration
Routing
This page allows you to specify custom routes that determine how data is moved around your network.
Routing List: Each Route has a checkbox next to it, check the
box of the route you wish to enable.
Metric: The route metric is a value from 1 to 16 that
indicates the cost of using this route. A value 1 is
the lowest cost and 15 is the highest cost.
Name: Specify a name for identification of this route.
Metric: The route metric is a value from 1 to 16 that
indicates the cost of using this route. A value 1 is
the lowest cost and 15 is the highest cost.
Interface: Select the interface which the IP packet must use
to transit out of the router when this route is used.
Destination IP: Enter the address of the host or network you wish
to access.
Netmask: This field identifies the portion of the destination IP in use.
Gateway: The IP address of the router will be displayed here.
D-Link DIR-615H1 User Manual
47
Section 3 - Configuration
Advanced Wireless Settings
Transmit Power: Set the transmit power of the antennas.
Beacon Period: Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value.
100 is the default setting and is recommended.
RTS Threshold: This value should remain at its default setting of
2346. If inconsistent data flow is a problem, only a
minor modification should be made.
Fragmentation The fragmentation threshold, which is specified
Threshold: in bytes, determines whether packets will be
fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission. 2346
is the default setting.
DTIM Interval: (Delivery Traffic Indication Message) 3 is the default
setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages.
WLAN Partition: This enables 802.11d operation. 802.11d is a wireless specification developed to allow implementation of wireless networks
in countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.
WMM Enable: WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients.
Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may
Short GI: create higher data loss.
D-Link DIR-615H1 User Manual
48
Section 3 - Configuration
Advanced Network Settings
UPnP Settings: To use the Universal Plug and Play (UPnP™)
feature click on Enabled. UPNP provides
compatibility with networking equipment, software
and peripherals.
WAN Ping: Unchecking the box will not allow the DIR-615H1
to respond to pings. Blocking the Ping may
provide some extra security from hackers. Check
the box to allow the Internet port to be “pinged”.
WAN Port Speed: You may set the port speed of the Internet port
to 10Mbps, 100Mbps, or auto. Some older cable
or DSL modems may require you to set the port
speed to 10Mbps.
UPnP
Internet Ping Block
Internet Port Speed
Multicast Streams
Multicast Check the box to allow multicast traffic to pass
Streams: through the router from the Internet.
D-Link DIR-615H1 User Manual
49
Section 3 - Configuration
IPv6
Link-Local Connectivity
My IPv6 Connection: Select Link-Local Only from the drop-down
menu.
LAN IPv6 Address Displays the IPv6 address of the router.
Settings:
D-Link DIR-615H1 User Manual
50
Section 3 - Configuration
Static IPv6 (Stateful)
My IPv6 Connection: Select Static IPv6 from the drop-down
menu.
WAN IPv6 Address Enter the address settings supplied by your
Settings: Internet provider (ISP).
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the
router.
LAN Link-Local Displays the Router’s LAN Link-Local
Address: Address.
Enable Check to enable the Autoconfiguration
Autoconfiguration: feature.
Autoconfiguration Select Stateful (DHCPv6) or Stateless.
Type: Refer to the next page for Stateless.
IPv6 Address Range Enter the start IPv6 Address for the DHCPv6
Start: range for your local computers.
IPv6 Address Range Enter the end IPv6 Address for the DHCPv6
End: range for your local computers.
IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes).
D-Link DIR-615H1 User Manual
51
Section 3 - Configuration
Static IPv6 (Stateless)
My IPv6 Connection: Select Static IPv6 from the drop-down
menu.
WAN IPv6 Address Enter the address settings supplied by your
Settings: Internet provider (ISP).
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the
router.
LAN Link-Local Displays the Router’s LAN Link-Local
Address: Address.
Enable Check to enable the Autoconfiguration
Autoconfiguration: feature.
Autoconfiguration Type: Select Stateless. Refer to the previous page
for Stateful.
Router Advertisement Enter the Router Advertisement Lifetime (in
Lifetime: minutes).
D-Link DIR-615H1 User Manual
52
Section 3 - Configuration
DHCPv6 (Stateful)
My IPv6 Connection: Select DHCPv6 from the drop-down menu.
Select either Obtain DNS server address
IPv6 DNS Settings: automatically or Use the following DNS
Address.
Enter the primary and secondary DNS
Primary/Secondary server addresses.
DNS Address:
Enter the LAN (local) IPv6 address for the
LAN IPv6 Address: router.
Displays the Router’s LAN Link-Local
LAN Link-Local Address.
Address:
Check to enable the Autoconfiguration
Enable feature.
Autoconfiguration:
Select Stateful (DHCPv6) or Stateless.
Autoconfiguration Refer to the next page for Stateless.
Type:
Enter the start IPv6 Address for the DHCPv6
IPv6 Address Range range for your local computers.
Start:
Enter the end IPv6 Address for the DHCPv6
IPv6 Address Range range for your local computers.
End:
Enter the IPv6 Address Lifetime (in minutes).
IPv6 Address Lifetime:
D-Link DIR-615H1 User Manual
53
Section 3 - Configuration
DHCPv6 (Stateless)
My IPv6 Connection: Select DHCPv6 from the drop-down menu.
Select either Obtain DNS server address
IPv6 DNS Settings: automatically or Use the following DNS
Address.
Enter the primary and secondary DNS
Primary/Secondary server addresses.
DNS Address:
Enter the LAN (local) IPv6 address for the
LAN IPv6 Address: router.
Displays the Router’s LAN Link-Local
LAN Link-Local Address.
Address:
Check to enable the Autoconfiguration
Enable feature.
Autoconfiguration:
Select Stateless. Refer to the previous page
Autoconfiguration for Stateful.
Type:
Enter the Router Advertisement Lifetime (in
Router Advertisement minutes).
Lifetime:
D-Link DIR-615H1 User Manual
54
Section 3 - Configuration
IPv6 over PPPoE (Stateful)
My IPv6 Connection: Select PPPoE from the drop-down menu.
PPPoE: Enter the PPPoE account settings supplied by your Internet
provider (ISP).
Address Mode: Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases,
select Dynamic.
IP Address: Enter the IP address (Static PPPoE only).
User Name: Enter your PPPoE user name.
Password: Enter your PPPoE password and then retype the password
in the next box.
Service Name: Enter the ISP Service Name (optional).
Reconnection Mode: Select either Always-on, On-Demand, or Manual.
MTU: Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your specific ISP. 1500
is the default MTU.
Maximum Idle Time: Enter a maximum idle time during which the Internet
connection is maintained during inactivity. To disable this
feature, enable Auto-reconnect.
IPv6 DNS Settings: Select either Obtain DNS server address automatically
or Use the following DNS Address.
Primary/Secondary DNS Enter the primary and secondary DNS server addresses.
Address:
D-Link DIR-615H1 User Manual
55
Section 3 - Configuration
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address: Displays the Router’s LAN Link-Local Address.
Enable Autoconfiguration: Check to enable the Autoconfiguration feature.
Autoconfiguration Type: Select Stateful (DHCPv6) or Stateless. Refer to the next page for Stateless.
IPv6 Address Range Start: Enter the start IPv6 Address for the DHCPv6 range for your local computers.
IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your local computers.
IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes).
D-Link DIR-615H1 User Manual
56
Section 3 - Configuration
IPv6 over PPPoE (Stateless)
My IPv6 Connection: Select PPPoE from the drop-down menu.
PPPoE: Enter the PPPoE account settings supplied by your Internet
provider (ISP).
Address Mode: Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases,
select Dynamic.
IP Address: Enter the IP address (Static PPPoE only).
User Name: Enter your PPPoE user name.
Password: Enter your PPPoE password and then retype the password
in the next box.
Service Name: Enter the ISP Service Name (optional).
Reconnection Mode: Select either Always-on, On-Demand, or Manual.
Maximum Idle Time: Enter a maximum idle time during which the Internet
connection is maintained during inactivity. To disable this
feature, enable Auto-reconnect.
MTU: Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your specific ISP. 1500
is the default MTU.
IPv6 DNS Settings: Select either Obtain DNS server address automatically
or Use the following DNS Address.
Primary/Secondary DNS Enter the primary and secondary DNS server addresses.
Address:
D-Link DIR-615H1 User Manual
57
Section 3 - Configuration
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address: Displays the Router’s LAN Link-Local Address.
Enable Autoconfiguration: Check to enable the Autoconfiguration feature.
Autoconfiguration Type: Select Stateful (DHCPv6) or Stateless.
Router Advertisement Enter the Router Advertisement Lifetime (in minutes).
Lifetime:
D-Link DIR-615H1 User Manual
58
Section 3 - Configuration
6 to 4 Tunneling (Stateful)
My IPv6 Connection: Select 6 to 4 from the drop-down menu.
6 to 4 Settings: Enter the IPv6 settings supplied by your Internet
provider (ISP).
Primary/Secondary Enter the primary and secondary DNS server
DNS Address: addresses.
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local
Address:
Enable
Autoconfiguration:
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select Stateful (DHCPv6) or Stateless. Refer
Autoconfiguration to the next page for Stateless.
Type:
Enter the start IPv6 Address for the DHCPv6
IPv6 Address Range range for your local computers.
Start:
Enter the end IPv6 Address for the DHCPv6
IPv6 Address Range range for your local computers.
End:
Enter the IPv6 Address Lifetime (in minutes).
IPv6 Address
Lifetime:
D-Link DIR-615H1 User Manual
59
Section 3 - Configuration
6 to 4 Tunneling (Stateless)
My IPv6 Connection: Select 6 to 4 from the drop-down menu.
6 to 4 Settings: Enter the IPv6 settings supplied by your
Internet provider (ISP).
Primary/Secondary DNS Enter the primary and secondary DNS server
Address: addresses.
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the
router.
LAN Link-Local Displays the Router’s LAN Link-Local Address.
Address:
Check to enable the Autoconfiguration feature.
Enable
Autoconfiguration: Select Stateless. Refer to the previous page
for Stateful.
Autoconfiguration Type:
Enter the Router Advertisement Lifetime (in
minutes).
Router Advertisement
Lifetime:
D-Link DIR-615H1 User Manual
60
Section 3 - Configuration
IPv6 in IPv4 Tunneling (Stateful)
My IPv6 Connection: Select IPv6 in IPv4 Tunnel from the drop-down
menu.
IPv6 in IPv4 Tunnel Enter the settings supplied by your Internet
Settings: provider (ISP).
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the
router.
LAN Link-Local Displays the Router’s LAN Link-Local Address.
Address:
Check to enable the Autoconfiguration feature.
Enable
Autoconfiguration: Select Stateful. Refer to the previous page
for Stateful.
Autoconfiguration
Type: Enter the start IPv6 Address for the DHCPv6
range for your local computers.
IPv6 Address Range
Start: Enter the end IPv6 Address for the DHCPv6
range for your local computers.
IPv6 Address Range
End: Enter the Router Advertisement Lifetime (in
minutes).
Pv6 Address
Lifetime:
D-Link DIR-615H1 User Manual
61
Section 3 - Configuration
IPv6 in IPv4 Tunneling (Stateless)
My IPv6 Connection: Select IPv6 in IPv4 Tunnel from the drop-down
menu.
IPv6 in IPv4 Tunnel Enter the settings supplied by your Internet
Settings: provider (ISP).
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the
router.
LAN Link-Local Displays the Router’s LAN Link-Local Address.
Address:
Check to enable the Autoconfiguration feature.
Enable
Autoconfiguration: Select Stateful (DHCPv6) or Stateless. Refer
to the next page for Stateless.
Autoconfiguration
Type: Enter the IPv6 Address Lifetime (in minutes).
IPv6 Address
Lifetime:
D-Link DIR-615H1 User Manual
62
Section 3 - Configuration
Stateless Autoconfiguration (Stateless)
My IPv6 Connection: Select Stateless Autoconfiguration from the
drop-down menu.
IPv6 DNS Settings: Enter the settings supplied by your Internet provider
(ISP).
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Displays the Router’s LAN Link-Local Address.
Address:
Enable Check to enable the Autoconfiguration feature.
Autoconfiguration:
Autoconfiguration Select Stateless. Refer to the previous page for
Type: Stateful.
IPv6 Address Enter the Router Advertisement Lifetime (in
Lifetime: minutes).
D-Link DIR-615H1 User Manual
63
Section 3 - Configuration
Stateless Autoconfiguration (Stateful)
My IPv6 Connection: Select Stateless Autoconfiguration from the
drop-down menu.
IPv6 DNS Settings: Enter the settings supplied by your Internet
provider (ISP).
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the
router.
LAN Link-Local Displays the Router’s LAN Link-Local Address.
Address:
Check to enable the Autoconfiguration feature.
Enable
Autoconfiguration: Select Stateful. Refer to the previous page
for Stateful.
Autoconfiguration
Type: Enter the start IPv6 Address for the DHCPv6
range for your local computers.
IPv6 Address
Lifetime: Enter the end IPv6 Address for the DHCPv6
range for your local computers.
IPv6 Address Range
Start: Enter the Router Advertisement Lifetime (in
minutes).
IPv6 Address
Lifetime:
D-Link DIR-615H1 User Manual
64
Section 3 - Configuration
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.
There are two accounts that can access the management interface through the web browser. The accounts are admin
and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot
make any changes. Only the admin account has the ability to change both admin and user account passwords.
Admin Password: Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
Gateway Name: Enter a name for the DIR-615H1 router.
Enable Graphical Enables a challenge-response test to require users to type letters
Authentication: or numbers from a distorted image displayed on the screen to
prevent online hackers and unauthorized users from gaining
access to your router’s network settings.
Enable HTTPS Check to enable HTTPS to connect to the router securely.
Server:
Enable Remote Remote management allows the DIR-615H1 to be configured
Management: from the Internet by a web browser. A username and password
is still required to access the Web-Management interface. In
general, only a member of your network can browse the built-in
web pages to perform Administrator tasks. This feature enables
you to perform Administrator tasks from the remote (Internet)
host.
The port number used to access the DIR-615H1.
Remote Admin
Inbound Filter: Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-615H1 and 8080 is the port used for
the Web Management interface. If you have enabled HTTPS Server and checked Use HTTPS, you must enter https://
as part of the URL to access the router remotely.
Details:
This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the
rule, or click the Delete icon to remove the rule.
Change Password
Remote Management
D-Link DIR-615H1 User Manual
65
Section 3 - Configuration
Time Settings
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system
clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also
be configured to automatically adjust the time when needed.
Time Zone: Select the Time Zone from the drop-down menu.
To select Daylight Saving time manually, select
Daylight enabled or disabled, and enter a start date and
Saving: an end date for daylight saving time.
NTP is short for Network Time Protocol. NTP
Enable NTP synchronizes computer clock times in a network
Server: of computers. Check this box to use a NTP
server. This will only connect to a server on the
Internet, not a local server.
Enter the NTP server or select one from the
NTP Server drop-down menu.
Used:
To manually input the time, enter the values
Manual: in these fields for the Year, Month, Day, Hour,
Minute, and Second and then click Set Time.
You can also click Copy Your Computer’s
Time Settings.
D-Link DIR-615H1 User Manual
66
Section 3 - Configuration
SysLog
The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs
to a SysLog server on your network.
Enable Logging to Check this box to send the router logs to a
SysLog Server: SysLog Server.
SysLog Server IP The address of the SysLog server that will be
Address: used to send the logs. You may also select
your computer from the drop-down menu (only
if receiving an IP address from the router via
DHCP).
D-Link DIR-615H1 User Manual
67
Section 3 - Configuration
E-mail Settings
The Email feature can be used to send the system log files, router alert messages, and firmware update notification
to your e-mail address.
Enable Email When this option is enabled, router activity logs
Notification: are e-mailed to a designated e-mail address.
From Email This e-mail address will appear as the sender
Address: when you receive a log file or firmware upgrade
notification via e-mail.
To Email Address: Enter the e-mail address where you want the
e-mail sent.
SMTP Server Enter the SMTP server address for sending
Address: e-mail. If your SMTP server requires
authentication, select this option.
Enable Check this box if your SMTP server requires
Authentication: authentication.
Account Name: Enter your account for sending e-mail.
Password: Enter the password associated with the
account. Re-type the password associated with
the account.
On Log Full: When this option is selected, logs will be sent
via e-mail when the log is full.
On Schedule: Selecting this option will send the logs via e-mail
according to schedule.
Schedule: This option is enabled when On Schedule is selected. You can select a schedule from the list of defined schedules. To
create a schedule, go to Tools > Schedules.
D-Link DIR-615H1 User Manual
68
Section 3 - Configuration
System Settings
Save Settings Use this option to save the current router
to Local Hard configuration settings to a file on the hard disk
Drive: of the computer you are using. First, click the
Save button. You will then see a file dialog,
where you can select a location and file name
for the settings.
Load Settings Use this option to load previously saved
from Local router configuration settings. First, use the
Hard Drive: Browse control to find a previously save file
of configuration settings. Then, click the Load
button to transfer those settings to the router.
Restore to This option will restore all configuration settings
Factory Default back to the settings that were in effect at the
Settings: time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router configuration
settings, use the Save button above.
Reboot Device: Click to reboot the router.
D-Link DIR-615H1 User Manual
69
Section 3 - Configuration
Update Firmware
You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of
the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support
site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the
D-Link support site.
Firmaware Click on Check Online Now for Latest
Information: Firmware Version to find out if there is an
updated firmware; if so, download the new
firmware to your hard drive.
Firmware After you have downloaded the new firmware,
Upgrade: click Browse to locate the firmware update on
your hard drive. Click Upload to complete the
firmware upgrade.
D-Link DIR-615H1 User Manual
70
Section 3 - Configuration
DDNS
The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have
purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet
Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in
your domain name to connect to your server no matter what your IP address is.
DDNS: Dynamic Domain Name System is a method of
keeping a domain name linked to a changing
IP Address. Check the box to enable DDNS.
Server Address: Choose your DDNS provider from the drop
down menu.
Host Name: Enter the Host Name that you registered with
your DDNS service provider.
Username or Key: Enter the Username for your DDNS account.
Password or Key: Enter the Password for your DDNS account.
Timeout: Enter a time (in hours).
Status: Displays the current connection status to your
DDNS server.
D-Link DIR-615H1 User Manual
71
Section 3 - Configuration
System Check
Ping Test: The Ping Test is used to send Ping packets
to test if a computer is on the Internet. Enter
the IP Address that you wish to Ping, and
click Ping.
Ping Results: The results of your ping attempts will be
displayed here.
D-Link DIR-615H1 User Manual
72
Section 3 - Configuration
Schedules
Name: Enter a name for your new schedule.
Days: Select a day, a range of days, or All Week to
include every day.
Time: Check All Day - 24hrs or enter a start and
end time for your schedule.
Save: Click Save to save your schedule. You
must click Save Settings at the top for your
schedules to go into effect.
Schedule Rules The list of schedules will be listed here. Click
List: the Edit icon to make changes or click the
Delete icon to remove the schedule.
D-Link DIR-615H1 User Manual
73
Section 3 - Configuration
Device Information
This page displays the current information for the DIR-615H1. It will display the LAN, WAN (Internet), and Wireless
information.
If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be
displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect
button and a Disconnect button will be displayed. Use
Disconnect to drop the PPPoE connection and use Connect
to establish the PPPoE connection.
See the following page for more information.
D-Link DIR-615H1 User Manual
74
Section 3 - Configuration
General: Displays the router’s time and firmware version.
WAN: Displays the MAC address and the public IP
settings for the router.
LAN: Displays the MAC address and the private (local)
IP settings for the router.
Wireless LAN: Displays the wireless MAC address and your
wireless settings such as SSID and Channel.
LAN Computers: Displays computers and devices that are connected
to the router via Ethernet and that are receiving an
IP address assigned by the router (DHCP).
IGMP Multicast Displays the Multicast Group IP Address.
Memberships:
D-Link DIR-615H1 User Manual
75
Section 3 - Configuration
The router automatically logs (records) events of possible interest in it’s internal memory. If there isn’t enough internal
memory for all events, logs of older events are deleted but logs of the latest events are retained. The Logs option allows
you to view the router logs. You can define what types of events you want to view and the level of the events to view.
This router also has external Syslog Server support so you can send the log files to a computer on your network that
is running a Syslog utility.
What to View: You can select the types of messages that you want
to display from the log. Firewall & Security, System,
and Router Status messages can be selected.
View Levels: There are three levels of message importance:
Informational, Warning, and Critical. Select the levels
that you want displayed in the log.
Apply Log Will filter the log results so that only the selected
Settings: options appear.
Refresh: Updates the log details on the screen so it displays
any recent activity.
Clear: Clears all of the log contents.
Email Now: This option will send a copy of the router log to the
e-mail address configured in the Tools > Email
Settings screen.
Save Log: This option will save the router to a log file on your
computer.
D-Link DIR-615H1 User Manual
76
Section 3 - Configuration
Statistics
The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-615H1
on both the Internet and the LAN ports. The traffic counter will reset if the device is rebooted.
D-Link DIR-615H1 User Manual
77
Section 3 - Configuration
Internet Sessions
The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is
a conversation between a program or application on a LAN-side computer and a program or application on a WANside computer.
Local: The IP address and, where appropriate, port
number of the local application.
NAT: The port number of the LAN-side application as
viewed by the WAN-side application.
Internet: The IP address and, where appropriate, port
number of the application on the Internet.
Protocol: The communications protocol used for the
conversation.
State: State for sessions that use the TCP protocol:
NO: None -- This entry is used as a placeholder for a future connection that may occur.
SS: SYN Sent -- One of the systems is attempting to start a connection.
EST: Established -- the connection is passing data.
FW: FIN Wait -- The client system has requested that the connection be stopped.
CW: Close Wait -- The server system has requested that the connection be stopped.
TW: Time Wait -- Waiting for a short time while a connection that was in FIN Wait is fully closed.
LA: Last ACK -- Waiting for a short time while a connection that was in Close Wait is fully closed.
CL: Closed -- The connection is no longer active but the session is being tracked in case there are any retransmitted
packets still pending.
Dir: The direction of initiation of the conversation:
Out - Initiated from LAN to WAN.
In - Initiated from WAN to LAN.
D-Link DIR-615H1 User Manual
78
Section 3 - Configuration
Priority: The preference given to outbound packets of this conversation by the QoS Engine logic. Smaller numbers represent higher
priority.
Time Out: The number of seconds of idle time until the router considers the session terminated. The initial value of Time Out depends
on the type and state of the connection.
300 seconds - UDP connections.
240 seconds - Reset or closed TCP connections. The connection does not close instantly so that lingering packets
can pass or the connection can be re-established.
7800 seconds - Established or closing TCP connections.
D-Link DIR-615H1 User Manual
79
Section 3 - Configuration
Routing Table
This page displays the routing details configured for your router.
D-Link DIR-615H1 User Manual
80
Section 3 - Configuration
Wireless
The wireless client table displays a list of current connected wireless clients. This table also displays the connection
time and MAC address of the connected wireless clients.
D-Link DIR-615H1 User Manual
81
Section 3 - Configuration
IPv6
This screen will display all of your IPv6 internet and network connection details are displayed on this page.
D-Link DIR-615H1 User Manual
82
Section 3 - Configuration
Support
D-Link DIR-615H1 User Manual
83
Section 4 - Security
Wireless Security
This section will show you the different levels of security you can use to protect your data from intruders. The DIR615H1 offers the following types of security:
• WPA2 (Wi-Fi Protected Access 2) 		
• WPA (Wi-Fi Protected Access)			
• WPA2-PSK(Pre-Shared Key)
• WPA-PSK (Pre-Shared Key)
What is WPA?
WPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired
Equivalent Privacy).
The 2 major improvements over WEP:
• Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys
using a hashing algorithm and, by adding an integrity-checking feature, ensures that the keys haven’t
been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead
of TKIP.
• User authentication, which is generally missing in WEP, through the extensible authentication protocol
(EAP). WEP regulates access to a wireless network based on a computer’s hardware-specific MAC
address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key
encryption system to ensure that only authorized network users can access the network.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric
password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must
be the exact same key entered on your wireless router or access point.
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a
more secure public key encryption system to ensure that only authorized network users can access the network.
D-Link DIR-615H1 User Manual
84
Section 4 - Security
Wireless Network Setup Wizard
To run the security wizard, browse to the Setup page and then click the Wireless Network Setup Wizard button.
D-Link DIR-615H1 User Manual
85
Section 4 - Security
Enter the SSID (Service Set Identifier). The SSID is the name
of your wireless network. Create a name using up to 32
characters. The SSID is case-sensitive. Select Automatically
and click Next.
Once this screen appears, the setup is complete. You will be
given a detailed summary of your wireless security settings.
Click Save to continue.
D-Link DIR-615H1 User Manual
86
Section 4 - Security
Enter the SSID (Service Set Identifier). The SSID is the
name of your wireless network. Create a name using up to
32 characters. The SSID is case-sensitive. Select Manually
and click on Next.
Select a wireless security password. It must be exactly 5 or 13
characters. It must also be exactly 10 or 26 characters using
0-9 and A-F. Click Next to continue.
Your Setup is complete. You will be given a detailed summary
of your wireless security settings. Click Save to finish the
Security Wizard.
D-Link DIR-615H1 User Manual
87
Section 4 - Security
Add Wireless Device with WPS Wizard
From the Setup > Wireless Settings screen, click Add
Wireless Device with WPS.
Select Auto to add a wireless client using WPS (Wi-Fi Protected
Setup). Once you select Auto and click Connect, you will have
a 120 second time limit to apply the settings to your wireless
client(s) and successfully establish a connection.
If you select Manual, a settings summary screen will appear.
Write down the security key and enter this on your wireless
clients.
PIN: Select this option to use PIN method. In order to use this
method you must know the wireless client’s 8 digit PIN and
click Connect.
PBC: Select this option to use PBC (Push Button) method to
add a wireless client. Click Connect.
D-Link DIR-615H1 User Manual
88
Section 4 - Security
Configure WPA-Personal (PSK)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1. Log into the web-based configuration by opening a
web browser and entering the IP address of the router
(192.168.0.1). Click on Setup and then click Wireless
Settings on the left side.
2. Next to Security Mode, select WPA-Personal.
3. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only.
Use Auto if you have wireless clients using both WPA and
WPA2.
4. Next to Cypher Type, select TKIP and AES, TKIP, or AES.
If you have wireless clients that use both types, use TKIP
and AES.
5. Next to Group Key Update Interval, enter the amount of time
before the group key used for broadcast and multicast data
is changed (3600 is default).
6. Next to Pre-Shared Key, enter a key (passphrase). The key
is entered as a pass-phrase in ASCII format at both ends of
the wireless connection. The pass-phrase must be between
8-63 characters.
7. Click Save Settings to save your settings. If you are
configuring the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter
and enter the same passphrase as you did on the router.
D-Link DIR-615H1 User Manual
89
Section 4 - Security
Configure WPA-Enterprise (RADIUS)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1. Log into the web-based configuration by opening a web browser
and entering the IP address of the router (192.168.0.1). Click
on Setup and then click Wireless Settings on the left side.
2. Next to Security Mode, select WPA-Enterprise.
Note: The user must disable Wi-Fi Protected Setup in order to select
WPA-Enterprise.
3. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use
Auto if you have wireless clients using both WPA and WPA2.
4. Next to Cypher Type, select TKIP and AES, TKIP, or AES. If you
have wireless clients that use both types, use TKIP and AES.
5. Next to Group Key Update Interval, enter the amount of time before
the group key used for broadcast and multicast data is changed
(3600 is default).
6. Next to Authentication Timeout, enter the amount of time before
a client is required to re-authenticate (60 minutes is default).
7. Next to RADIUS Server IP Address enter the IP Address of your
RADIUS server.
D-Link DIR-615H1 User Manual
90
Section 4 - Security
8. Next to RADIUS Server Port, enter the port you are using with
your RADIUS server. 1812 is the default port.
9. Next to RADIUS Server Shared Secret, enter the security key.
10. If the MAC Address Authentication box is selected then the
user will need to connect from the same computer whenever
logging into the wireless network.
11. Click Advanced to enter settings for a secondary RADIUS
Server.
12. Click Apply Settings to save your settings.
D-Link DIR-615H1 User Manual
91
Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows® 7
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring
your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase
being used.
1. Click on the wireless icon in your system tray (lower-right corner).
Wireless Icon
2. The utility will display any available wireless networks in your
area.
D-Link DIR-615H1 User Manual
92
Section 5 - Connecting to a Wireless Network
3. Highlight the wireless network (SSID) you would like to
connect to and click the Connect button.
If you get a good signal but cannot access the Internet, check
your TCP/IP settings for your wireless adapter. Refer to the
Networking Basics section in this manual for more information.
4. The following window appears while your computer tries to
connect to the router.
D-Link DIR-615H1 User Manual
93
Section 5 - Connecting to a Wireless Network
5. Enter the same security key or passphrase that is on your
router and click Connect. You can also connect by pushing
the WPS button on the router.
It may take 20-30 seconds to connect to the wireless network. If
the connection fails, please verify that the security settings are
correct. The key or passphrase must be exactly the same as on
the wireless router.
D-Link DIR-615H1 User Manual
94
Section 5 - Connecting to a Wireless Network
Configure WPS
The WPS feature of the DIR-615H1 can be configured using Windows® 7. Carry out the following steps to use Windows®
7 to configure the WPS feature of the DIR-615H1:
1. Click the Start button and select Computer from the Start
menu.
2. Click the Network option.
D-Link DIR-615H1 User Manual
95
Section 5 - Connecting to a Wireless Network
3. Double-click the DIR-615H1 router.
4. Input the WPS PIN number (displayed in the WPS window on
the Router’s LCD screen or in the Setup > Wireless Setup
menu in the Router’s Web UI) and click Next.
D-Link DIR-615H1 User Manual
96
Section 5 - Connecting to a Wireless Network
5. Type a name to identify the network.
6. To configure advanced settings, click the
icon.
Click Next to continue.
D-Link DIR-615H1 User Manual
97
Section 5 - Connecting to a Wireless Network
7. The following window appears while the Router is being
configured.
Wait for the configuration to complete.
8. The following window informs you that WPS on the DIR-615H1
has been setup successfully.
Make a note of the security key as you may need to provide
this security key if adding an older wireless device to the
network in the future.
9. Click Close to complete WPS setup.
D-Link DIR-615H1 User Manual
98
Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows Vista®
Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility or Windows® 2000,
please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities
will have a “site survey” option similar to the Windows Vista® utility as seen below.
If you receive the Wireless Networks Detected bubble, click
on the center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select Connect to a
network.
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) and click
the Connect button.
If you get a good signal but cannot access the Internet, check
you TCP/IP settings for your wireless adapter. Refer to the
Networking Basics section in this manual for more information.
D-Link DIR-615H1 User Manual
99
Section 5 - Connecting to a Wireless Network
Configure WPA/WPA2
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring
your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase
being used.
1. Open the Windows Vista® Wireless Utility by right-clicking
on the wireless computer icon in your system tray (lower
right corner of screen). Select Connect to a network.
2. Highlight the wireless network (SSID) you would like
to connect to and click Connect.
D-Link DIR-615H1 User Manual
100
Section 5 - Connecting to a Wireless Network
3. Enter the same security key or passphrase that is on your router
and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct.
The key or passphrase must be exactly the same as on the wireless
router.
D-Link DIR-615H1 User Manual
101
Section 5 - Connecting to a Wireless Network
Connect Using WCN 2.0
The router supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista® and Windows 7. The following instructions
for setting this up depends on whether you are using Windows Vista® and Windows 7 to configure the router or third
party software.
When you first set up the router, Wi-Fi protection is disabled and unconfigured. To enjoy the benefits of Wi-Fi protection,
the router must be both enabled and configured. There are three basic methods to accomplish this: use Windows
Vista’s built-in support for WCN 2.0, use software provided by a third party, or manually configure.
If you are running Windows Vista®, log into the router and click the Enable checkbox in the Basic > Wireless section.
Use the Current PIN that is displayed on the Advanced > Wi-Fi Protected Setup section or choose to click the
Generate New PIN button or Reset PIN to Default button.
If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished,
proceed to the next section to set up the newly-configured router.
D-Link DIR-615H1 User Manual
102
Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows® XP
Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for
Service Pack 2 users. If you are using another company’s utility or Windows® 2000, please refer to the user manual
of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option
similar to the Windows® XP utility as seen below.
If you receive the Wireless Networks Detected bubble, click
on the center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select View Available
Wireless Networks.
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) and click
the Connect button.
If you get a good signal but cannot access the Internet, check
you TCP/IP settings for your wireless adapter. Refer to the
Networking Basics section in this manual for more information.
D-Link DIR-615H1 User Manual
103
Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows® XP Through WPA-PSK
It is recommended to enable WEP on your wireless router or access point before configuring your wireless adapter. If
you are joining an existing network, you will need to know the WEP key being used.
1. Open the Windows® XP Wireless Utility by right-clicking
on the wireless computer icon in your system tray
(lower-right corner of screen). Select View Available
Wireless Networks.
2. Highlight the wireless network (SSID) you would like
to connect to and click Connect.
D-Link DIR-615H1 User Manual
104
Section 5 - Connecting to a Wireless Network
3. The Wireless Network Connection box will appear. Enter the
WPA-PSK passphrase and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the WPA-PSK settings are correct.
The WPA-PSK passphrase must be exactly the same as on the
wireless router.
D-Link DIR-615H1 User Manual
105
Section 6 - Troubleshooting
Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of the DIR-615H1.
Read the following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If
you have a different operating system, the screen shots on your computer will look similar to the following examples.)
1. Why can’t I access the web-based configuration utility?
When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website on
the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself.
Your computer must be on the same IP subnet to connect to the web-based utility.
• Make sure you have an updated Java-enabled web browser. We recommend the following:
• Internet Explorer 6 or higher
• Netscape 8 or higher
• Mozilla 1.7.12 (5.0) or higher
• Opera 8.5 or higher
• Safari 3 or higher
• Camino 0.8.4 or higher
• Firefox 3.0 or higher
• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using
a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may
not be on.
• Disable any Internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice,
Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the
help files included with your firewall software for more information on disabling or configuring it.
D-Link DIR-615H1 User Manual
106
Section 6 - Troubleshooting
• Configure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab,
click the button to restore the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings
button. Make sure nothing is checked. Click OK.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three
times.
• Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address
bar. This should open the login page for your the web management.
• If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait
about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different
computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back
to the factory defaults.
To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a
paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process.
Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is
admin and leave the password box empty.
D-Link DIR-615H1 User Manual
107
Section 6 - Troubleshooting
3. Why can’t I connect to certain sites or send and receive e-mails when connecting through my router?
If you are having a problem sending or receiving e-mail, or connecting to secure sites such as eBay, banking sites,
and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc).
Note: AOL DSL+ users must use MTU of 1400.
To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination
could be another computer, or a URL.
• Click on Start and then click Run.
• Windows® 95, 98, and Me users type in command (Windows® NT, 2000, and XP users type in cmd) and
press Enter (or click OK).
• Once the window opens, you’ll need to do a special ping. Use the following syntax:
ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472
D-Link DIR-615H1 User Manual
108
Section 6 - Troubleshooting
You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a
fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example,
lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network
we’re working with (1452+28=1480).
Once you find your MTU, you can now configure your router with the proper MTU size.
To change the MTU rate on your router follow the steps below:
• Open your browser, enter the IP address of your router (192.168.0.1) and click OK.
• Enter your username (admin) and password (blank by default). Click OK to enter the web configuration
page for the device.
• Click on Setup and then click Manual Configure.
• To change the MTU enter the number in the MTU field and click Save Settings to save your settings.
• Test your e-mail. If changing the MTU does not resolve the problem, continue changing the MTU in
increments of ten.
D-Link DIR-615H1 User Manual
109
Appendix A - Wireless Basics
Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless
connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard,
the D-Link wireless family of products will allow you to securely access the data you want, when and where you want
it. You will be able to enjoy the freedom that wireless networking delivers.
A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals
instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such
as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and
communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven
to be beneficial for many users.
Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop
and desktop systems support the same protocols as Ethernet adapter cards.
Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in
order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device
used to provide this link.
D-Link DIR-615H1 User Manual
110
Appendix A - Wireless Basics
What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires.
Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere
in your home or office network.
Why D-Link Wireless?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking
products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products
you need to build your network.
How does wireless work?
Wireless works similar to how cordless phone work, through radio signals to transmit data from one point
A to point B. But wireless technology has restrictions as to how you can access the network. You must be
within the wireless network range area to be able to connect your computer. There are two different types
of wireless networks Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN).
Wireless Local Area Network (WLAN)
In a wireless local area network, a device called an Access Point (AP) connects computers to the network.
The access point has a small antenna attached to it, which allows it to transmit data back and forth over
radio signals. With an indoor access point as seen in the picture, the signal can travel up to 300 feet. With
an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants,
industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues.
D-Link DIR-615H1 User Manual
111
Appendix A - Wireless Basics
Wireless Personal Area Network (WPAN)
Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate
in a range up to 30 feet away.
Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it
doesn’t use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs,
headphones, laptops, speakers, and other devices that operate on batteries.
Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for
home, office, business, D-Link has a wireless solution for it.
Home
• Gives everyone at home broadband access
• Surf the web, check e-mail, instant message, and etc
• Gets rid of the cables around the house
• Simple and easy to use
Small Office and Home Office
• Stay on top of everything at home as you would at office
• Remotely access your office network from home
• Share Internet connection and printer with multiple computers
• No need to dedicate office space
D-Link DIR-615H1 User Manual
112
Appendix A - Wireless Basics
Where is wireless used?
Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility
and it’s becoming so popular that more and more public facilities now provide wireless access to attract people.
The wireless connection in public places is usually called “hotspots”.
Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from
remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.
Wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing
where to start. That’s why we’ve put together a few setup steps and tips to help you through the process of
setting up a wireless network.
Tips
Here are a few things to keep in mind, when you install a wireless network.
Centralize your router or Access Point
Make sure you place the router/access point in a centralized location within your network for the best
performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed
throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend
the range.
Eliminate Interference
Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible
from the router/access point. This would significantly reduce any interference that the appliances might cause
since they operate on same frequency.
D-Link DIR-615H1 User Manual
113
Appendix A - Wireless Basics
Security
Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network
by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information
on how to set it up.
Wireless Modes
There are basically two modes of networking:
• Infrastructure – All wireless clients will connect to an access point or wireless router.
• Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network
adapters on each computer, such as two or more DIR-615H1 wireless network Cardbus adapters.
An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect
to the wireless router or access point.
An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in
Ad-Hoc mode to communicate.
D-Link DIR-615H1 User Manual
114
Appendix B - Networking Basics
Networking Basics
Check your IP address
After you install your adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server
(i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK. (Windows Vista® users type cmd in the Start Search box.)
At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and
the default gateway of your adapter.
If the address is 0.0.0.0, check your adapter
installation, security settings, and the settings on
your router. Some firewall software programs may
block a DHCP request on newly installed adapters.
D-Link DIR-615H1 User Manual
115
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps
below:
Step 1
Windows® 7 Windows Vista® Windows XP Windows 2000 -
Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Change
Adapter Setting.
Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage
Network Connections.
Click on Start > Control Panel > Network Connections.
From the desktop, right-click My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same
subnet as your network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address
192.168.0.X where X is a number between 2 and 99. Make sure that the number
you choose is not in use on the network. Set Default Gateway the same as the LAN
IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1).
The Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DIR-615H1 User Manual
116
Appendix C - Technical Specifications
Technical Specifications
Standards
• IEEE 802.11n
• IEEE 802.11g
• IEEE 802.3
• IEEE 802.3u
Frequency Range
• 2.4GHz to 2.483GHz
Security
• WPA-Personal
• WPA2-Personal
• WPA-Enterprise
• WPA2-Enterprise
LEDs
Transmitter Output Power
• 17dBm
± 2dB
22dBm+/-2dB
Wireless Signal Rates*
• 108Mbps
48Mbps
802.11n:
up to•300Mbps
• 54Mbps54, 48,
• 24Mbps
802.11g:
36, 24, 18, 12, 9 and 6Mbps
• 36Mbps11, 5.5,
• 12Mbps
802.11b:
2, and 1Mbps
• 18Mbps
• 9Mbps
• 11Mbps
• 5.5Mbps
• 6Mbps
• 1Mbps
• 2Mbps 			
MSC (0-15)
• 130Mbps (270)
• 104Mbps (216)
• 66Mbps (135)
• 52Mbps (108)
• 26Mbps (54)
• 12Mbps (27)
• 117Mbps (243)
• 78Mbps (162)
• 58.5Mbps (121.5)
• 39Mbps (81)
• 19.5Mbps (40.5)
• 6.5Mbps (13.5)
• Power
• WLAN
• Internet		
• LAN (10/100)		
Operating Temperature*
• 32°F to 104°F ( 0°C to 40°C)
Humidity
• 95% maximum (non-condensing)
Safety & Emissions
• FCC
• IC
• CE
Dimensions
• L = 7.8 inches
• W = 5 inches
• H = 1.2 inches
* Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will
adversely affect wireless signal range.
* Indoor use only
D-Link DIR-615H1 User Manual
117
Appendix E - Warranty
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies
users must
complies with
with FCC
FCCradiation
radiationexposure
exposurelimits
limitsset
setforth
forthfor
foran
anuncontrolled
uncontrolledenvironment.
environment.End
This
equipment
should operating
be installed
and operated
with minimum
distancecompliance.
20cm between
the radiator
& your body.
follow
the specific
instructions
for satisfying
RF exposure
To maintain
compliance
with FCC RF
exposure compliance requirements, please follow operation instruction as documented in this manual.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
D-Link DIR-615H1 User Manual
118
Appendix E - Warranty
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence.
Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage
préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer
un fonctionnement indésirable.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
NOTE IMPORTANTE: (Pour l’utilisation de dispositifs mobiles)
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et
votre corps.
D-Link DIR-615H1 User Manual
119

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Create Date                     : 2011:03:24 14:32:36+08:00
Metadata Date                   : 2011:04:01 16:07:58+08:00
Creator Tool                    : Adobe InDesign CS4 (6.0.6)
Modify Date                     : 2011:04:01 16:07:58+08:00
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 6781 bytes, use -b option to extract)
Instance ID                     : uuid:9fdc7516-6ecc-4cbf-a412-f11094d8e585
Document ID                     : xmp.did:6B98A79FDF55E011B02BFDFD68798BB4
Original Document ID            : adobe:docid:indd:74ba20c0-ef58-11de-bdbc-dd9a5394a456
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:6A98A79FDF55E011B02BFDFD68798BB4
Derived From Document ID        : xmp.did:E565BF93EEF5DF119013BFF1E5415C1A
Derived From Original Document ID: adobe:docid:indd:74ba20c0-ef58-11de-bdbc-dd9a5394a456
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:577BF014E716DF11B834E510E0EFB909, xmp.iid:587BF014E716DF11B834E510E0EFB909, xmp.iid:597BF014E716DF11B834E510E0EFB909, xmp.iid:5A7BF014E716DF11B834E510E0EFB909, xmp.iid:F0D8E4A321EBDF118024F2B94FAEAE37, xmp.iid:F1D8E4A321EBDF118024F2B94FAEAE37, xmp.iid:BF525883C9EBDF11AE12F540721A0A89, xmp.iid:D0B258E796ECDF11AE12F540721A0A89, xmp.iid:E465BF93EEF5DF119013BFF1E5415C1A, xmp.iid:E565BF93EEF5DF119013BFF1E5415C1A, xmp.iid:311731B426F6DF119985F3B753484C2A, xmp.iid:321731B426F6DF119985F3B753484C2A, xmp.iid:855E6103E6F6DF11A558F7E4C0AB96DC, xmp.iid:865E6103E6F6DF11A558F7E4C0AB96DC, xmp.iid:23221E4E1501E0119D70E2EB31FC4F8E, xmp.iid:24221E4E1501E0119D70E2EB31FC4F8E, xmp.iid:64BD6A282701E0119D70E2EB31FC4F8E, xmp.iid:F5730FDD7003E011A3D0D8A24760941A, xmp.iid:F6730FDD7003E011A3D0D8A24760941A, xmp.iid:6A98A79FDF55E011B02BFDFD68798BB4, xmp.iid:6B98A79FDF55E011B02BFDFD68798BB4
History When                    : 2010:02:11 16:47:18+08:00, 2010:02:11 16:47:18+08:00, 2010:02:11 17:31:25+08:00, 2010:02:11 18:39:23+08:00, 2010:11:08 18:19:16+08:00, 2010:11:08 18:26:51+08:00, 2010:11:10 14:49:57+08:00, 2010:11:10 14:51:11+08:00, 2010:11:22 13:35:59+08:00, 2010:11:22 13:35:59+08:00, 2010:11:23 10:16:58+08:00, 2010:11:23 10:20:11+08:00, 2010:11:23 18:27:39+08:00, 2010:11:23 18:37:22+08:00, 2010:12:06 18:52:07+08:00, 2010:12:06 18:52:30+08:00, 2010:12:06 18:54:11+08:00, 2010:12:09 18:25:08+08:00, 2010:12:09 18:25:35+08:00, 2011:03:24 14:32:10+08:00, 2011:03:24 14:32:10+08:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 72.00, 72.00, 150.00, 72.00, 300.00, 300.00, 300.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 300.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00
Manifest Placed Y Resolution    : 300.00, 72.00, 72.00, 150.00, 72.00, 300.00, 300.00, 300.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 300.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : xmp.iid:82FE6FCFDD55E011B88CE2EA659FABC2, uuid:a674034a-585a-11da-af11-cf2357ad247d, uuid:31E36DEA3F12DD118B5E9089B40E1B44, uuid:DFC9542B3BF1DE11868EE097F3257646, uuid:2d9312be-531b-4fec-aeae-70514b463da1, uuid:27F0F6E93AF1DE11868EE097F3257646, uuid:DBC9542B3BF1DE11868EE097F3257646, xmp.iid:84FE6FCFDD55E011B88CE2EA659FABC2, uuid:757b79f8-fa08-11d9-9634-db5cd49ad058, uuid:29393BCDC064DE11AAC6E39DA8D19EA5, uuid:11B4A93EA3A7DE11BE63831DD0770557, uuid:DC5259D4E982DE119D46AC3A7020FFA6, xmp.iid:1356EE4602F6DF11898ABC88884D06A9, uuid:A2887567EB82DE119D46AC3A7020FFA6, xmp.iid:1356EE4602F6DF11898ABC88884D06A9, uuid:591EE296A583DE11B353B03101ECA569, xmp.iid:1356EE4602F6DF11898ABC88884D06A9, uuid:5C1EE296A583DE11B353B03101ECA569, uuid:5D3841FCC186DE118ECBCE73D12F2AF9, uuid:D07AA67BBEEEDB11B552B5808C759CED, uuid:02D13319C286DE118ECBCE73D12F2AF9, uuid:F82A4A2F77CBDB11903DE7E64D68D382, uuid:704D3CE677CBDB11903DE7E64D68D382, uuid:754D3CE677CBDB11903DE7E64D68D382, uuid:7A4D3CE677CBDB11903DE7E64D68D382, uuid:8E125C5278CBDB11903DE7E64D68D382, uuid:93125C5278CBDB11903DE7E64D68D382, uuid:BB0A8C130E82DE119D388769832CF426, uuid:8E11CFF4F454DD1197EA9F8BADD09E14, uuid:81749297F854DD1197EA9F8BADD09E14, uuid:C10A8C130E82DE119D388769832CF426, uuid:4F77C6880855DD1197EA9F8BADD09E14, uuid:5377C6880855DD1197EA9F8BADD09E14, uuid:5777C6880855DD1197EA9F8BADD09E14, uuid:CA8115DC0955DD1197EA9F8BADD09E14, uuid:CE8115DC0955DD1197EA9F8BADD09E14, uuid:2F78AA2FD486DE11B489897B959A4487, uuid:8261ED4D9686DE11BCA0CAD44DC2B58B, uuid:6DE96DADC188DC11A014F42E98B33B80, uuid:71E96DADC188DC11A014F42E98B33B80, uuid:C7CC65A2C388DC11A014F42E98B33B80, uuid:0A336F45B80FDC119419C2B98BC94F7B, uuid:A76DB0717C2DDB11A73289CE6C7ECECB, uuid:78B00BA47E2DDB11A73289CE6C7ECECB, uuid:40674894EDBCDE1185D1D9D309EE1DFE, uuid:43674894EDBCDE1185D1D9D309EE1DFE, uuid:9704D86E7F4FDC11A05FE732C1FAED7F, uuid:555EA4107B4FDC11A05FE732C1FAED7F, uuid:555EA4107B4FDC11A05FE732C1FAED7F, uuid:9704D86E7F4FDC11A05FE732C1FAED7F, uuid:595EA4107B4FDC11A05FE732C1FAED7F, uuid:ed645c8c-4cba-11da-bf84-f59405901279, uuid:31c0b145-4d52-11da-9063-86e0e23ed818, uuid:4e2f0bb9-4cbb-11da-bf84-f59405901279, uuid:ed645c8c-4cba-11da-bf84-f59405901279, uuid:4e2f0bb9-4cbb-11da-bf84-f59405901279, uuid:5baa3ab9-f546-11d9-80f7-b1c380115801
Manifest Reference Document ID  : uuid:F1487FC3A8C9DC119566A3E4D3C4CA99, adobe:docid:photoshop:a6740349-585a-11da-af11-cf2357ad247d, adobe:docid:photoshop:b815545f-0cc2-11d9-8359-b99ba4fe37b5, uuid:DEC9542B3BF1DE11868EE097F3257646, uuid:28BD5AB4DC04DF11866EEFDB61AB3A53, uuid:BF75068F39F1DE11868EE097F3257646, uuid:DAC9542B3BF1DE11868EE097F3257646, uuid:D04B5A71586D11DC8A038F359B8E4455, adobe:docid:photoshop:49f3ef52-fa08-11d9-9634-db5cd49ad058, uuid:28393BCDC064DE11AAC6E39DA8D19EA5, uuid:10B4A93EA3A7DE11BE63831DD0770557, uuid:1B3F5A950B82DE119D388769832CF426, uuid:AA78B6C5E981DE119D388769832CF426, uuid:1E3F5A950B82DE119D388769832CF426, uuid:AA78B6C5E981DE119D388769832CF426, uuid:213F5A950B82DE119D388769832CF426, uuid:AA78B6C5E981DE119D388769832CF426, uuid:AD78B6C5E981DE119D388769832CF426, uuid:5C3841FCC186DE118ECBCE73D12F2AF9, uuid:CF7AA67BBEEEDB11B552B5808C759CED, uuid:01D13319C286DE118ECBCE73D12F2AF9, uuid:F72A4A2F77CBDB11903DE7E64D68D382, uuid:FC2A4A2F77CBDB11903DE7E64D68D382, uuid:744D3CE677CBDB11903DE7E64D68D382, uuid:794D3CE677CBDB11903DE7E64D68D382, uuid:8D125C5278CBDB11903DE7E64D68D382, uuid:92125C5278CBDB11903DE7E64D68D382, uuid:BA0A8C130E82DE119D388769832CF426, uuid:8D11CFF4F454DD1197EA9F8BADD09E14, uuid:80749297F854DD1197EA9F8BADD09E14, uuid:C00A8C130E82DE119D388769832CF426, uuid:4E77C6880855DD1197EA9F8BADD09E14, uuid:5277C6880855DD1197EA9F8BADD09E14, uuid:5677C6880855DD1197EA9F8BADD09E14, uuid:C98115DC0955DD1197EA9F8BADD09E14, uuid:CD8115DC0955DD1197EA9F8BADD09E14, uuid:2E78AA2FD486DE11B489897B959A4487, uuid:8161ED4D9686DE11BCA0CAD44DC2B58B, uuid:6CE96DADC188DC11A014F42E98B33B80, uuid:70E96DADC188DC11A014F42E98B33B80, uuid:C6CC65A2C388DC11A014F42E98B33B80, uuid:09336F45B80FDC119419C2B98BC94F7B, uuid:A66DB0717C2DDB11A73289CE6C7ECECB, uuid:AA6DB0717C2DDB11A73289CE6C7ECECB, uuid:3F674894EDBCDE1185D1D9D309EE1DFE, uuid:42674894EDBCDE1185D1D9D309EE1DFE, uuid:9604D86E7F4FDC11A05FE732C1FAED7F, uuid:545EA4107B4FDC11A05FE732C1FAED7F, uuid:545EA4107B4FDC11A05FE732C1FAED7F, uuid:9604D86E7F4FDC11A05FE732C1FAED7F, uuid:585EA4107B4FDC11A05FE732C1FAED7F, adobe:docid:photoshop:ed645c8b-4cba-11da-bf84-f59405901279, adobe:docid:photoshop:31c0b141-4d52-11da-9063-86e0e23ed818, adobe:docid:photoshop:4e2f0bb6-4cbb-11da-bf84-f59405901279, adobe:docid:photoshop:ed645c8b-4cba-11da-bf84-f59405901279, adobe:docid:photoshop:4e2f0bb6-4cbb-11da-bf84-f59405901279, adobe:docid:photoshop:3d378fe2-f545-11d9-80f7-b1c380115801
Doc Change Count                : 138
Format                          : application/pdf
Trapped                         : False
Producer                        : PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)]
Has XFA                         : No
Page Count                      : 123
Creator                         : Adobe InDesign CS4 (6.0.6)

EXIF Metadata provided by EXIF.tools