D Link IR626LA1 Wireless N300 Cloud Router User Manual

D Link Corporation Wireless N300 Cloud Router

IR626LA1 User Manual PDF Download & Text

User Manual.pdf

Download:
Mirror Download [FCC.gov]
Document ID	1752970
Application ID	kxZ7lRX5x0yLCjT41d5vhA==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	437.95kB (5474396 bits)
Date Submitted	2012-07-26 00:00:00
Date Available	2012-07-26 00:00:00
Creation Date	2012-07-03 17:29:12
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2012-07-26 13:32:21
Document Title	User Manual.pdf
Document Creator	Adobe InDesign CS4 (6.0.6)

Version 1.0 | 07/03/2012
User Manual
Wireless N 300 Cloud Router
Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any
person or organization of such revisions or changes.
Manual Revisions
Revision
Date
1.0
February 15, 2012
Description
• Initial release for Revision A1
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of
their respective companies.
Copyright © 2012 by D-Link Systems, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission
from D-Link Systems, Inc.
D-Link DIR-626L User Manual
Table of Contents
Table of Contents
Preface.................................................................................. i
Manual Revisions............................................................................ i
Trademarks....................................................................................... i
Product Overview............................................................... 1
Package Contents.......................................................................... 1
System Requirements.................................................................. 2
Introduction.................................................................................... 3
Features............................................................................................. 4
Hardware Overview...................................................................... 5
Connections............................................................................ 5
LEDs............................................................................................ 6
Installation.......................................................................... 7
Before you Begin............................................................................ 7
Wireless Installation Considerations....................................... 8
Manual Setup.................................................................................. 9
Connect to an Existing Router................................................11
Configuration....................................................................13
Quick Setup Wizard.....................................................................14
QRS Mobile App...........................................................................21
SharePort Mobile App...............................................................22
Web-based Configuration Utility...........................................26
Internet Connection Setup..............................................27
Static (assigned by ISP).................................................28
Dynamic (Cable)..............................................................30
PPPoE (DSL).......................................................................31
PPTP.....................................................................................33
L2TP.....................................................................................35
D-Link DIR-626L User Manual
DS-Lite................................................................................37
Wireless Settings..................................................................38
Manual Wireless Settings..................................................39
Wireless Security..................................................................41
What is WPA?....................................................................41
Wireless Security Setup Wizard..................................42
Add Wireless Device with WPS Wizard....................44
WPA/WPA2-Personal (PSK)..........................................46
Configure WPA/WPA2-Enterprise (RADIUS)..........47
Network Settings.................................................................49
Router Settings................................................................49
DHCP Server Settings....................................................50
DHCP Reservation..........................................................52
Storage....................................................................................53
Access Files from the Internet....................................54
Media Server.................................................................................55
IPv6...........................................................................................56
IPv6 Internet Connection Setup Wizard.................57
IPv6 Manual Setup.........................................................62
mydlink Settings..................................................................71
Advanced................................................................................72
Virtual Server....................................................................72
Port Forwarding..............................................................73
Application Rules............................................................74
QoS Engine........................................................................75
Network Filters.................................................................76
Access Control..................................................................77
Website Filters..................................................................80
ii
Table of Contents
Inbound Filters.................................................................81
Firewall Settings..............................................................82
Routing...............................................................................84
Advanced Wireless.........................................................85
Wi-Fi Protected Setup (WPS)......................................86
Advanced Network Settings.......................................88
Guest Zone........................................................................89
IPv6 Firewall......................................................................90
IPv6 Routing.....................................................................91
Tools.........................................................................................92
Admin.................................................................................92
Time.....................................................................................93
SysLog.................................................................................94
Email Settings..................................................................95
System................................................................................96
Firmware............................................................................97
Language Pack.................................................................97
Dynamic DNS...................................................................98
System Check...................................................................99
Schedules....................................................................... 100
Status.................................................................................... 101
Device Info..................................................................... 101
Logs.................................................................................. 102
Statistics.......................................................................... 103
Internet Sessions.......................................................... 104
Routing............................................................................ 105
Wireless........................................................................... 106
IPv6................................................................................... 107
IPV6 Routing.................................................................. 108
D-Link DIR-626L User Manual
Support................................................................................ 109
Connect a Wireless Client to your Router.....................110
WPS Button................................................................................. 110
Windows® 7................................................................................. 111
WPA/WPA2.......................................................................... 111
WPS........................................................................................ 114
Windows Vista®.......................................................................... 118
WPA/WPA2.......................................................................... 119
WPS/WCN 2.0..................................................................... 121
Windows® XP.............................................................................. 122
WPA/WPA2.......................................................................... 123
Troubleshooting.............................................................125
Wireless Basics................................................................129
What is Wireless?....................................................................... 130
Tips................................................................................................. 132
Wireless Modes.......................................................................... 133
Networking Basics..........................................................134
Check your IP address............................................................. 134
Statically Assign an IP address............................................. 135
Technical Specifications.................................................136
iii
Section 1 - Product Overview
Product
PackageOverview
Contents
DIR-626L Wireless N300 Cloud Router
Ethernet Cable
Power Adapter
CD
Wi-Fi Configuration Note
WI-FI Configuration Note
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a different voltage rating than the one included with the DIR-626L will cause damage and void the warranty
for this product.
D-Link DIR-626L User Manual
Section 1 - Product Overview
System Requirements
Network Requirements
• An Ethernet-based Cable or DSL modem
• IEEE 802.11n or 802.11g wireless clients
• 10/100 Ethernet
Computer with the following:
• Windows®, Macintosh, or Linux-based operating system
• An installed Ethernet adapter
Web-based Configuration
Utility Requirements
Browser Requirements:
• Internet Explorer 7 or higher
• Firefox 3.5 or higher
• Safari 4 or higher
• Chrome 8 or higher
Windows® Users: Make sure you have the latest version of Java
installed. Visit www.java.com to download the latest version.
mydlink Requirements
• iPhone/iPad/iPod Touch (iOS 3.0 or higher)
• Android device (1.6 or higher)
• Computer with the following browser requirements:
• Internet Explorer 7 or higher
• Firefox 3 or higher
• Safari 5 or higher
• Chrome 5 or higher
iPhone, iPad, and iPod touch are registered trademarks of Apple Inc. Android is a trademark of Google, Inc.
D-Link DIR-626L User Manual
Section 1 - Product Overview
Introduction
The D-Link Wireless N300 Cloud Router(DIR-626L) uses 802.11n technology with multiple intelligent antennas to maximize
the speed and range of your wireless signal to significantly outperform 802.11g devices.
With the addition of Intelligent Quality of Service (QoS), data streams are separated which helps organize and prioritize your
network traffic so your video streaming, gaming, and VoIP calls run smoother over both your wired and wireless network.
The D-Link Cloud Service will allow you to always have access to your home network no matter where you go. Now you can
monitor and manage your home network right from your laptop, iPhone®, iPad®7, or Android™ device. The cloud-enabled
router can be configured to send an email to keep you informed anywhere, anytime when new devices are connecting to
your network or unwanted access is detected. Monitor in real-time websites that are being visited with recent browser history
displayed on the mydlink™ Lite app – which is great for parents.
The D-Link Cloud Service can detect and block unwelcomed guests who try to get into your wireless network and suspicious
activities will be displayed right on your mydlink™ Lite app or browser.
D-Link DIR-626L User Manual
Section 1 - Product Overview
Features
• Faster Wireless Networking - The DIR-626L provides up to 300Mbps* wireless connection with other 802.11n
wireless clients. This capability allows users to participate in real-time activities online, such as video streaming,
online gaming, and real-time audio. The performance of this 802.11n wireless router gives you the freedom of
wireless networking at speeds 14x faster than 802.11g.
• Compatible with 802.11g Devices - The DIR-626L is still fully compatible with the IEEE 802.11g standards, so
it can connect with existing 802.11g PCI, USB, and Cardbus adapters.
• Advanced Firewall Features - The Web-based user interface displays a number of advanced network
management features including:
• Content Filtering - Easily applied content filtering based on MAC Address, URL, and/or Domain
Name.
• Filter Scheduling - These filters can be scheduled to be active on certain days or for a duration of
hours or minutes.
• Secure Multiple/Concurrent Sessions - The DIR-626L can pass through VPN sessions. It supports
multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-626L can securely access
corporate networks.
• User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DIR-626L lets you control
what information is accessible to those on the wireless network, whether from the Internet or from your company’s
server. Configure your router to your specific settings within minutes.
* Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely
affect wireless signal range.
D-Link DIR-626L User Manual
Section 1 - Product Overview
Hardware Overview
Connections
USB Port
WPS Button
LAN Ports (1-4)
Internet Port
Using an Ethernet cable, connect your broadband modem to this port.
Power Button
Press the power button to power on and off.
Power Receptor
D-Link DIR-626L User Manual
Connect a USB flash drive to share content throughout your network.
Press to start the WPS process. The Internet LED will start to blink.
Connect 10/100 Ethernet devices such as computers, switches, storage (NAS) devices and game consoles.
Receptor for the supplied power adapter.
Section 1 - Product Overview
Hardware Overview
LEDs
Power LED
Internet LED
D-Link DIR-626L User Manual
A solid green light indicates a proper connection to the power supply. The light will blink green during
the WPS process. The light will blink orange during boot up.
A solid light indicates connection on the Internet port. If the LED is orange, the connection is good but
the router cannot connect to the Internet.
Section 2 - Installation
Installation
This section will walk you through the installation process. Placement of the router is very important. Do not place the router
in an enclosed area such as a closet, cabinet, or in the attic or garage.
Before you Begin
• Please configure the router with the computer that was last connected directly to your modem.
• You can only use the Ethernet port on your modem. If you were using the USB connection before using the router,
then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port
on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection
types (USB to Ethernet).
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet,
Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.
D-Link DIR-626L User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the
operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings,
or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types
of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to
follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that
the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle
appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position
devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range.
Try to position access points, wireless routers, and computers so that the signal passes through drywall or open
doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file
cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF
noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security
systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone
base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not
in use.
D-Link DIR-626L User Manual
Section 2 - Installation
Manual Setup
1. Turn off and unplug your cable or DSL broadband modem. This is required.
Modem
2. Position your router close to your modem and a computer. Place the router in an open area of your intended
work area for better wireless coverage.
3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer.
Plug it into the LAN port labeled 1 on the back of your router. The router is now connected to your computer.
DIR-626L
Computer
D-Link DIR-626L User Manual
Section 2 - Installation
4. Plug one end of the included blue Ethernet cable that came with your router into the yellow port labeled
INTERNET on the back of the router. Plug the other end of this cable into the Ethernet port on your modem.
DIR-626L
Modem
INTERNET
Computer
5. Reconnect the power adapter to your cable or DSL broadband modem and wait for two minutes.
6. Connect the supplied power adapter into the power port on the back of the router and then plug it into a power
outlet or surge protector. Press the power button and verify that the power LED is lit. Allow 1 minute for the
router to boot up.
DIR-626L
Modem
INTERNET
Computer
7. If you are connecting to a Broadband service that uses a dynamic connection (not PPPoE), you may be online
already. Try opening a web browser and enter a web site. If you connect, you are finished with your Internet setup.
Please skip to page 13 to configure your router and use the manual setup procedure to configure your network
and wireless settings. If you did not connect to the Internet, use the D-Link Setup Wizard (refer to page 14).
D-Link DIR-626L User Manual
10
Section 2 - Installation
Connect to an Existing Router
Note: It is strongly recommended to replace your existing router with the DIR-626L instead of using both. If your modem is a combo
router, you may want to contact your ISP or manufacturer’s user guide to put the router into Bridge mode, which will ‘turn off’ the
router (NAT) functions.
If you are connecting the DIR-626L router to an existing router to use as a wireless access point and/or switch, you will have
to do the following to the DIR-626L before connecting it to your network:
• Disable UPnP™
• Disable DHCP
• Change the LAN IP address to an available address on your network. The LAN ports on the router cannot accept
a DHCP address from your other router.
To connect to another router, please follow the steps below:
1. Plug the power into the router. Connect one of your computers to the router (LAN port) using an Ethernet cable. Make sure
your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the Networking Basics
section for more information. If you need to change the settings, write down your existing settings before making any
changes. In most cases, your computer should be set to receive an IP address automatically in which case you will not have
to do anything to your computer.
2. Open a web browser, enter http://dlinkrouter.local and press Enter. When the login window appears, set the user name
to Admin and leave the password box empty. Click Log In to continue.
3. Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settings to continue.
4. Click Setup and then click Network Settings. Uncheck the Enable DHCP Server checkbox. Click Save Settings to continue.
D-Link DIR-626L User Manual
11
Section 2 - Installation
5. Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save Settings to save your
settings. Use this new IP address to access the configuration utility of the router in the future. Close the browser and change
your computer’s IP settings back to the original values as in Step 1.
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network.
7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug anything
into the Internet (WAN) port of the D-Link router.
8. You may now use the other 3 LAN ports to connect other Ethernet devices and computers. To configure your wireless network,
open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and Wireless Security
sections for more information on setting up your wireless network.
D-Link DIR-626L User Manual
12
Section 2 - Installation
Configuration
There are several different ways you can configure your router to connect to the Internet and connect to your clients:
• QRS Mobile App - Use your iPhone, iPad, or iPod Touch to configure your router. Refer to page 21
• D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to page 14.
• Manual Setup - Log into the router and manually configure your router (advanced users only). Refer to page 22.
D-Link DIR-626L User Manual
13
Section 3 - Configuration
Quick Setup Wizard
If this is your first time installing the router, open your web
browser. You will automatically be directed to the Wizard Setup
Screen.
If you have already configured your settings and you would like
to access the configuration utility, please refer to page 22.
If this is your first time logging into the router, this wizard will
start automatically.
This wizard is designed to guide you through a step-by-step
process to configure your new D-Link router and connect to the
Internet.
Click Next to continue.
Please wait while your router detects your internet connection type.
If the router detects your Internet connection, you may need to enter
your ISP information such as username and password.
D-Link DIR-626L User Manual
14
Section 3 - Configuration
If the router does not detect a valid Ethernet connection from the
Internet port, this screen will appear. Connect your broadband modem
to the Internet port and then click Try Again.
If the router detects an Ethernet connection but does not detect the type
of Internet connection you have, this screen will appear. Click Guide me
through the Internet Connection Settings to display a list of connection
types to choose from.
Select your Internet connection type and click Next to continue.
D-Link DIR-626L User Manual
15
Section 3 - Configuration
If the router detected or you selected PPPoE, enter your PPPoE username
and password and click Next to continue.
Note: Make sure to remove your PPPoE software from your computer. The
software is no longer needed and will not work through a router.
If the router detected or you selected PPTP, enter your PPTP username,
password, and other information supplied by your ISP. Click Next to
continue.
If the router detected or you selected L2TP, enter your L2TP username,
password, and other information supplied by your ISP. Click Next to
continue.
D-Link DIR-626L User Manual
16
Section 3 - Configuration
If the router detected or you selected Static, enter the IP and DNS
settings supplied by your ISP. Click Next to continue.
Create a Wi-Fi network name (SSID) using up to 32 characters.
Create a Wi-Fi password (between 8-63 characters). Your wireless clients
will need to have this passphrase or key entered to be able to connect
to your wireless network.
Click Next to continue.
In order to secure your router, please enter a new password. Check the
Enable Graphical Authentication box to enable CAPTCHA authentication
for added security. Click Next to continue.
D-Link DIR-626L User Manual
17
Section 3 - Configuration
Select your time zone from the drop-down menu and click Next to
continue.
The Setup Complete window will display your Wi-Fi settings. Click Save
and Connect to continue.
If you want to create a bookmark to the router, click OK. Click Cancel if
you do not want to create a bookmark.
If you clicked Yes, a window may appear (depending on what web
browser you are using) to create a bookmark.
D-Link DIR-626L User Manual
18
Section 3 - Configuration
To use the mydlink service (mydlink.com or the mydlink Lite app), you
must have an account. Select if you do have a mydlink account or if you
need to create one. Click Next to continue.
If you do not want to register at this time, click Cancel.
If you clicked Yes, enter your mydlink account name (email address) and
password. Click Login to register your router.
If you clicked No, fill out the requested information and click Next to
create your mydlink account.
Once your account information is entered, click Login.
D-Link DIR-626L User Manual
19
Section 3 - Configuration
The mydlink App will allow you to receive notices, browse network
users, and configure your router from an iPhone/iPad/iPod Touch
(iOS 3.0 or higher), Android device (1.6 or higher).
To download the "mydlink lite" app, visit the Apple Store, Android
Market or http://mydlink.com/Lite.
PC and Mac users can use the mydlink portal at http://mydlink.com.
D-Link DIR-626L User Manual
20
Section 3 - Configuration
QRS Mobile App
D-Link offers an app for your iPad, iPod Touch, or iPhone (iOS 4.3 or higher) to install and configure your router.
Step 1
From your iPad, Touch, or iPhone, go to the iTunes Store and
search for ‘D-Link’. Select QRS Mobile and then download it.
You may also scan this code to download.
Step 2
Once your app is installed, you may now configure your router.
Connect to the router wirelessly by going to your wireless utility
on your device. Scan for the Wi-Fi name (SSID) as listed on the
supplied info card. Select and then enter your Wi-Fi password.
Step 3
Once you connect to the router, launch the QRS mobile app and
it will guide you through the installation of your router.
D-Link DIR-626L User Manual
21
Section 3 - Configuration
SharePort Mobile App
The SharePort Mobile app will allow you to access files from a USB thumb drive that is plugged into your router. You must enable file sharing from
the Setup > Storage page (refer to page 53) for this app to work properly.
1. Insert your USB flash drive into DIR-626L.
2. Scan the bar code to download the SharePort Mobile APP from the app
store to your iPhone or iPad.
3. From your iOS mobile device, click Settings.
Settings
D-Link DIR-626L User Manual
22
Section 3 - Configuration
4. Click Wi-Fi, select the Wi-Fi Network Name (SSID) that you created in the
setup and then enter your Wi-Fi password.
5. Once connected, click on the SharePort Mobile icon.
6. The following screen will appear.
D-Link DIR-626L User Manual
23
Section 3 - Configuration
7. Click on Settings icon located on the right top corner of the screen. Click
Edit to enter your User Name and Password. Once you finish, click Done
to continue.
8. For the Movie section, click the movie icon to play your movie from your
USB flash drive.
9. For the Music section, click the music icon to play your music from your
USB flash drive.
D-Link DIR-626L User Manual
24
Section 3 - Configuration
10. For the Photo section, click the Photo icon to view your photos from
your USB flash drive.
11. For the Files section, click on the Files icon to view your files from your
USB flash drive.
12. For the Folder section, click the folder icon to view your folders
from your USB flash drive.
D-Link DIR-626L User Manual
25
Section 3 - Configuration
Web-based Configuration Utility
To access the configuration utility, open a web-browser such as
Internet Explorer and enter address of the router (http://dlinkrouter.
local or http://192.168.0.1).
Select Admin from the drop-down menu and then enter
your password. Leave the password blank by default.
D-Link DIR-626L User Manual
26
Section 3 - Configuration
Internet Connection Setup
Click Manual Internet Connection Setup to configure your
connection manually and continue to the next page.
If you want to configure your router to connect to the Internet
using the wizard, click Internet Connection Setup Wizard.
You will be directed to the Quick Setup Wizard. Please refer
to page 14.
D-Link DIR-626L User Manual
27
Section 3 - Configuration
Manual Internet Setup
Static (assigned by ISP)
Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask,
gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which
are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
My Internet Connection: Select Static IP to manually enter the IP settings supplied by
your ISP.
Enable Advanced DNS Advanced Domain Name System (DNS) services enhances your
Service: Internet performance by getting you the information and web
pages you are looking for faster and more reliably. In addition,
it improves your overall Internet experience by correcting many
common typo mistakes automatically, taking you where you
intended to go and saving you valuable time.
Disclaimer: D-Link makes no warranty as to the availability, reliability,
functionality and operation of the Advanced DNS service or its features.
Enable True Gigabit Check to enable true Gigabit routing. This will increase the
Routing Connectivity: through-put of the WAN-LAN connectivity of the router.
IP Address: Enter the IP address assigned by your ISP.
Subnet Mask: Enter the Subnet Mask assigned by your ISP.
Default Gateway: Enter the Gateway assigned by your ISP.
DNS Servers: The DNS server information will be supplied by your ISP (Internet
Service Provider.)
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the
default MTU.
D-Link DIR-626L User Manual
28
Section 3 - Configuration
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your ISP. You can use the Copy Your PC’s MAC Address button to
replace the Internet port’s MAC address with the MAC address of your Ethernet card.
D-Link DIR-626L User Manual
29
Section 3 - Configuration
Dynamic (Cable)
My Internet Select Dynamic IP (DHCP) to obtain IP Address information
Connection: automatically from your ISP. Select this option if your ISP does not give
you any IP numbers to use. This option is commonly used for cable
modem services.
Enable Advanced Advanced Domain Name System (DNS) services enhances your Internet
DNS Service: performance by getting you the information and web pages you
are looking for faster and more reliably. In addition, it improves your
overall Internet experience by correcting many common typo mistakes
automatically, taking you where you intended to go and saving you
valuable time.
Disclaimer: D-Link makes no warranty as to the availability, reliability,
functionality and operation of the Advanced DNS service or its features.
Host Name: The Host Name is optional but may be required by some ISPs. Leave
blank if you are not sure.
Use Unicasting: Check the box if you are having problems obtaining an IP address
from your ISP.
Primary/Secondary Enter the Primary and secondary DNS server IP addresses assigned by your ISP. These addresses are usually obtained automatically
DNS Server: from your ISP. Leave at 0.0.0.0 if you did not specifically receive these from your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the
default MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your ISP. You can use the Copy Your PC’s MAC Address button to
replace the Internet port’s MAC address with the MAC address of your Ethernet card.
D-Link DIR-626L User Manual
30
Section 3 - Configuration
Internet Setup
PPPoE (DSL)
Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a
username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your
computer. The software is no longer needed and will not work through a router.
My Internet Select PPPoE (Username/Password) from the drop-down menu.
Connection:
Enable Advanced Domain Name System (DNS) services enhances your Internet
Advanced DNS performance by getting you the information and web pages you are looking
Service: for faster and more reliably. In addition, it improves your overall Internet
experience by correcting many common typo mistakes automatically, taking
you where you intended to go and saving you valuable time.
Disclaimer: D-Link makes no warranty as to the availability, reliability, functionality
and operation of the Advanced DNS service or its features.
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses. In most cases, select Dynamic.
IP Address: Enter the IP address (Static PPPoE only).
User Name: Enter your PPPoE user name.
Password: Enter your PPPoE password and then retype the password in the next box.
Service Name: Enter the ISP Service Name (optional).
Reconnect Select either Always-on, On-Demand, or Manual.
Mode:
Maximum Idle Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Time: Auto-reconnect.
D-Link DIR-626L User Manual
31
Section 3 - Configuration
DNS Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only).
Addresses:
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default
MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your ISP. You can use the Copy Your PC’s MAC Address button to
replace the Internet port’s MAC address with the MAC address of your Ethernet card.
D-Link DIR-626L User Manual
32
Section 3 - Configuration
Internet Setup
PPTP
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
My Internet Select PPTP (Username/Password) from the drop-down menu.
Connection:
Enable Advanced Domain Name System (DNS) services enhances your Internet
Advanced DNS performance by getting you the information and web pages you
Service: are looking for faster and more reliably. In addition, it improves your
overall Internet experience by correcting many common typo mistakes
automatically, taking you where you intended to go and saving you
valuable time.
Disclaimer: D-Link makes no warranty as to the availability, reliability,
functionality and operation of the Advanced DNS service or its features.
Address Mode: Select Static if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic.
PPTP IP Address: Enter the IP address (Static PPTP only).
PPTP Subnet Enter the Primary and Secondary DNS Server Addresses (Static PPTP
Mask: only).
PPTP Gateway: Enter the Gateway IP Address provided by your ISP.
PPTP Server IP: Enter the Server IP provided by your ISP (optional).
Username: Enter your PPTP username.
Password: Enter your PPTP password and then retype the password in the next
box.
D-Link DIR-626L User Manual
33
Section 3 - Configuration
Reconnect Select either Always-on, On-Demand, or Manual.
Mode:
Maximum Idle Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Time: Auto-reconnect.
DNS Servers: The DNS server information will be supplied by your ISP (Internet Service Provider.)
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default
MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to
replace the Internet port’s MAC address with the MAC address of your Ethernet card.
D-Link DIR-626L User Manual
34
Section 3 - Configuration
Internet Setup
L2TP
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and
password. This option is typically used for DSL services.
My Internet Select L2TP (Username/Password) from the drop-down menu.
Connection:
Enable Advanced Domain Name System (DNS) services enhances your
Advanced DNS Internet performance by getting you the information and web
Service: pages you are looking for faster and more reliably. In addition,
it improves your overall Internet experience by correcting many
common typo mistakes automatically, taking you where you
intended to go and saving you valuable time.
Disclaimer: D-Link makes no warranty as to the availability,
reliability, functionality and operation of the Advanced DNS service
or its features.
Address Mode: Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic.
L2TP IP Address: Enter the L2TP IP address supplied by your ISP (Static only).
L2TP Subnet Enter the Subnet Mask supplied by your ISP (Static only).
Mask:
L2TP Gateway: Enter the Gateway IP Address provided by your ISP.
L2TP Server IP: Enter the Server IP provided by your ISP (optional).
Username: Enter your L2TP username.
D-Link DIR-626L User Manual
35
Section 3 - Configuration
Password: Enter your L2TP password and then retype the password in the next box.
Reconnect Select either Always-on, On-Demand, or Manual.
Mode:
Maximum Idle Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Time: Auto-reconnect.
DNS Servers: Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default
MTU.
Clone MAC The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended
Address: that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to
replace the Internet port’s MAC address with the MAC address of your Ethernet card.
D-Link DIR-626L User Manual
36
Section 3 - Configuration
Internet Setup
DS-Lite
Another Internet Connection type is DS-Lite.
DS-Lite is an IPv6 connection type. After selecting DS-Lite, the following parameters will be available for configuration:
DS-Lite Select the DS-Lite DHCPv6 option to let the router allocate the
Configuration: AFTR IPv6 address automatically. Select the Manual Configuration
to enter the AFTR IPv6 address in manually.
AFTR IPv6 After selecting the Manual Configuration option above, enter the
Address: AFTR IPv6 address used here.
B4 IPv4 Address: Enter the B4 IPv4 address value used here.
WAN IPv6 Once connected, the WAN IPv6 address will be displayed here.
Address:
IPv6 WAN Once connected, the IPv6 WAN Default Gateway address will be
Default Gateway displayed here.
D-Link DIR-626L User Manual
37
Section 3 - Configuration
Wireless Settings
If you want to configure the wireless settings on your router using
the wizard, click Wireless Security Setup Wizard and refer to
page 42.
Click Add Wireless Device with WPS if you want to add a wireless
device using Wi-Fi Protected Setup (WPS) and refer to page 44.
If you want to manually configure the wireless settings on your
router click Manual Wireless Network Setup and refer to the
next page.
D-Link DIR-626L User Manual
38
Section 3 - Configuration
Manual Wireless Settings
Enable Wireless: Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all the
wireless functions.
Schedule: Select the time frame that you would like your wireless
network enabled. The schedule may be set to Always. Any
schedule you create will be available in the drop-down menu.
Click New Schedule to create a schedule.
Wireless Network Service Set Identifier (SSID) is the name of your wireless
Name: network. Create a name for your wireless network using up to 32 characters. The SSID is case-sensitive.
802.11 Mode: Select one of the following:
802.11b Only - Select only if all of your wireless clients are 802.11b.
802.11g Only - Select only if all of your wireless clients are 802.11g.
802.11n Only - Select only if all of your wireless clients are 802.11n.
Mixed 802.11g and 802.11b - Select if you are using both 802.11g and 802.11b wireless clients.
Mixed 802.11n and 802.11g - Select if you are using both 802.11n and 802.11g wireless clients.
Mixed 802.11n, 11g, and 11b - Select if you are using a mix of 802.11n, 802.11g, and 802.11b wireless clients.
Enable Auto The Auto Channel Scan setting can be selected to allow the DIR-626L to choose the channel with the least amount of interference.
Channel Scan:
Wireless Channel: Indicates the channel setting for the DIR-626L. By default the channel is set to 6. The Channel can be changed to fit the channel
setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will
be greyed out.
D-Link DIR-626L User Manual
39
Section 3 - Configuration
Channel Width: Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Visibility Status: Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-626L. If Invisible is selected, the
SSID of the DIR-626L will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-626L in
order to connect to it.
Wireless Security: Refer to the next page for more information regarding wireless security.
D-Link DIR-626L User Manual
40
Section 4 - Security
Wireless Security
This section will show you the different levels of security you can use to protect your data from intruders. The DIR-626L offers the
following types of security:
• WPA2 (Wi-Fi Protected Access 2)
• WPA (Wi-Fi Protected Access)
• WPA2-PSK (Pre-Shared Key)
• WPA-PSK (Pre-Shared Key)
What is WPA?
WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).
The 2 major improvements over WEP:
• Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing
algorithm and, by adding an integrity-checking feature, ensures that the keys haven’t been tampered with. WPA2 is
based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP.
• User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP
regulates access to a wireless network based on a computer’s hardware-specific MAC address, which is relatively simple
to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized
network users can access the network.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between
8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your
wireless router or access point.
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public
key encryption system to ensure that only authorized network users can access the network.
D-Link DIR-626L User Manual
41
Section 4 - Security
Wireless Security Setup Wizard
To run the security wizard, click on Setup at the top and then click
Wireless Network Setup Wizard.
Type your desired wireless network name (SSID).
Automatically: Select this option to automatically generate
the router’s network key and click Next.
Manually: Select this option to manually enter your network
key and click Next.
D-Link DIR-626L User Manual
42
Section 4 - Security
If you selected Automatically, the summary window will display
your settings. Write down the security key and enter this on your
wireless clients. Click Save to save your settings.
If you selected Manually, the following screen will appear. Create
a passphrase for your security password. Click Next to continue.
D-Link DIR-626L User Manual
43
Section 4 - Security
Add Wireless Device with WPS Wizard
From the Setup > Wireless Settings screen, click Add Wireless
Device with WPS.
Select Auto to add a wireless client using WPS (Wi-Fi Protected
Setup) and then click Next. Skip to the next page.
If you select Manual, a settings summary screen will appear. Write
down the security key and enter this on your wireless clients. Click
OK to finish.
D-Link DIR-626L User Manual
44
Section 4 - Security
PIN: Select this option to use PIN method. In order to use this
method you must know the wireless client’s 8 digit PIN and click
Connect.
PBC: Select this option to use PBC (Push Button) method to add a
wireless client. Click Connect.
Once you click Connect, you will have a 120 second time limit
to apply the settings to your wireless client(s) and successfully
establish a connection.
D-Link DIR-626L User Manual
45
Section 4 - Security
WPA/WPA2-Personal (PSK)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser and
entering the IP address of the router (192.168.0.1). Click on Setup and
then click Wireless Settings on the left side.
2. Next to Security Mode, select WPA-Personal.
3. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use Auto
if you have wireless clients using both WPA and WPA2.
4. Next to Cypher Type, select TKIP and AES, TKIP, or AES.
5. Next to Group Key Update Interval, enter the amount of time before
the group key used for broadcast and multicast data is changed (3600
is default).
6. Next to Pre-Shared Key, enter a key (passphrase). The key is entered as
a pass-phrase in ASCII format at both ends of the wireless connection.
The pass-phrase must be between 8-63 characters.
7. Click Save Settings to save your settings. If you are configuring the
router with a wireless adapter, you will lose connectivity until you
enable WPA-PSK on your adapter and enter the same passphrase as
you did on the router.
D-Link DIR-626L User Manual
46
Section 4 - Security
Configure WPA/WPA2-Enterprise (RADIUS)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser and
entering the IP address of the router (192.168.0.1). Click on Setup
and then click Wireless Settings on the left side.
2. Next to Security Mode, select WPA-Enterprise.
3. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use Auto
if you have wireless clients using both WPA and WPA2.
4. Next to Cypher Type, select TKIP and AES, TKIP, or AES.
5. Next to Group Key Update Interval, enter the amount of time before
the group key used for broadcast and multicast data is changed
(3600 is default).
6. Next to Authentication Timeout, enter the amount of time before a
client is required to re-authenticate (60 minutes is default).
7. Next to RADIUS Server IP Address enter the IP Address of your RADIUS
server.
D-Link DIR-626L User Manual
47
Section 4 - Security
8. Next to RADIUS Server Port, enter the port you are using with
your RADIUS server. 1812 is the default port.
9. Next to RADIUS Server Shared Secret, enter the security key.
10. If the MAC Address Authentication box is selected then the user
will need to connect from the same computer whenever logging
into the wireless network.
11. Click Advanced to enter settings for a secondary RADIUS Server.
12. Click Apply Settings to save your settings.
D-Link DIR-626L User Manual
48
Section 3 - Configuration
Network Settings
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Router Settings
Router IP Address: Enter the IP address of the router. The default IP address
is 192.168.0.1.
If you change the IP address, once you click Save Settings,
you will need to enter the new IP address in your browser
to get back into the configuration utility.
Subnet Mask: Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Device Name: Enter a name for the router.
Local Domain: Enter the Domain name (Optional).
Enable DNS Relay: Uncheck the box to transfer the DNS server information
from your ISP to your computers. If checked, your
computers will use the router for a DNS server.
D-Link DIR-626L User Manual
49
Section 3 - Configuration
DHCP Server Settings
DHCP stands for Dynamic Host Control Protocol. The DIR-626L has a built-in DHCP server. The DHCP Server will automatically
assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting
their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load
the proper TCP/IP settings provided by the DIR-626L. The DHCP Server will automatically allocate an unused IP address from
the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.
Enable DHCP Check this box to enable the DHCP server on your router.
Server: Uncheck to disable this function.
DHCP IP Address Enter the starting and ending IP addresses for the DHCP server’s
Range: IP assignment.
Note: If you statically (manually) assign IP addresses to your
computers or devices, make sure the IP addresses are outside of
this range or you may have an IP conflict.
DHCP Lease Time: The length of time for the IP address lease. Enter the Lease time
in minutes.
Always Enable this feature to broadcast your networks DHCP server to
Broadcast: LAN/WLAN clients.
NetBIOS NetBIOS allows LAN hosts to discover all other computers within
Announcement: the network, enable this feature to allow the DHCP Server to
offer NetBIOS configuration settings.
Learn NetBIOS Enable this feature to allow WINS information to be learned from the WAN side, disable to allow manual configuration.
from WAN:
NetBIOS Scope: This feature allows the configuration of a NetBIOS ‘domain’ name under which network hosts operates. This setting has no effect if
the ‘Learn NetBIOS information from WAN’ is activated.
D-Link DIR-626L User Manual
50
Section 3 - Configuration
NetBIOS Node: Select the different type of NetBIOS node; Broadcast only, Point-to-Point, Mixed-mode, and Hybrid.
WINS IP Enter your WINS Server IP address(es).
Address:
D-Link DIR-626L User Manual
51
Section 3 - Configuration
DHCP Reservation
If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP
address only to that computer or device.
Note: This IP address must be within the DHCP IP Address Range.
Enable: Check this box to enable the reservation.
Computer Name: Enter the computer name or select from the drop-down
menu and click <<.
IP Address: Enter the IP address you want to assign to the computer
or device. This IP Address must be within the DHCP IP
Address Range.
MAC Address: Enter the MAC address of the computer or device.
Copy Your PC’s If you want to assign an IP address to the computer you
MAC Address: are currently on, click this button to populate the fields.
Save: Click Save to save your entry. You must click Save Settings
at the top to activate your reservations.
DHCP Reservations List
DHCP Displays any reservation entries. Displays the host name
Reservations List: (name of your computer or device), MAC Address, and IP
address.
Enable: Check to enable the reservation.
Edit: Click the edit icon to make changes to the reservation entry.
Delete: Click to remove the reservation from the list.
D-Link DIR-626L User Manual
52
Section 3 - Configuration
Storage
This page will allow you to access files from a USB external hard drive or thumb drive that is plugged into the router from your
local network or from the Internet using either a web browser or an app for your smartphone or tablet. You can create users
to be allowed to access these files.
Enable Web File Check to enable sharing files on your USB storage device that is
Access: plugged in your router.
Enable HTTP Check to enable HTTP access to your router’s storage. You will
Storage Remote have to type HTTP in the URL.
Access:
Remote Access Enter a port (8181 is default). You will have to enter this port
Port: in the URL when connecting to the shared files. For example:
(http://192.168.0.1:8181).
Enable HTTPS Check to enable HTTPS (secure) access to your router’s storage.
Storage Remote You will have to type HTTPS in the URL.
Access:
Remote HTTPS Enter a port (4433 is default). You will have to enter this port
Port: in the URL when connecting to the shared files. For example:
(https://192.168.0.1:4433).
User Name: To create a new user, enter a user name.
Password: Enter a password for this account.
Verify Password: Re-enter the password. Click Add/Edit to create the user.
User List: Displays the accounts. The Admin and Guest accounts are built-in
to the router.
Number of Displays the USB device plugged into the router.
Devices:
D-Link DIR-626L User Manual
53
Section 3 - Configuration
Access Files from the Internet
If you would like to access your files that are on your USB thumb drive or external hard drive that is connected to your router, follow the steps below:
Step 1 - Enable Web File Access
Check the Enable Web File Access checkbox to enable. Then select
if you want to use HTTP or HTTPS (secure) and enter the port(s) you
want to use. The default for HTTP is 8181 and HTTPS is 4433.
Step 2 - Create a User Account
Under User Creation, enter a username and password, and then click
Add/Edit.
Step 3 - Configure your Access Path
Under User List, click the Modify icon for the user you just created.
Here you can browse to the folder on your USB storage device you
want to assign the Access Path to.
Step 4 - Save Settings
If you want to add more users, repeat steps 3 and 4. Once you are
finished, click the Save Settings button at the top to save your
settings.
Note that under the HTTP Storage Link (at the bottom) will display
the URL(s) you can use to connect. Also if you selected HTTPS, you
must type in HTTPS:// instead of HTTP:// to get a secure connection.
For example, if you selected HTTPS and changed the port to
3200, and your WAN IP address is 1.2.3.4, then you would enter
HTTPS://1.2.3.4:3200 to connect.
D-Link DIR-626L User Manual
54
Section 3 - Configuration
Media Server
This feature allows you to share music, pictures and videos with any devices connected to your network.
Enable Media Check this box to enable the media server feature.
Server:
Computer Enter the media server’s name.
Name:
Click Save to save your entry. You must click Save
Settings at the top to activate your reservations.
D-Link DIR-626L User Manual
55
Section 3 - Configuration
IPv6
On this page, the user can configure the IPv6 Connection type. There are two ways to set up the IPv6 Internet connection. You
can use the Web-based IPv6 Internet Connection Setup Wizard, or you can manually configure the connection.
For the beginner user that has not configured a router before, click on
the IPv6 Internet Connection Setup Wizard button and the router will
guide you through a few simple steps to get your network up and running.
For the advanced user that has configured a router before, click on the
Manual IPv6 Internet Connection Setup button to input all the settings
manually.
To configure the IPv6 local settings, click on the IPv6 Local Connectivity
Setup button.
D-Link DIR-626L User Manual
56
Section 3 - Configuration
IPv6 Internet Connection Setup Wizard
On this page, the user can configure the IPv6 Connection type using the IPv6 Internet Connection Setup Wizard.
Click the IPv6 Internet Connection Setup Wizard button and the router will guide
you through a few simple steps to get your network up and running.
Click Next to continue to the next page. Click Cancel to discard the changes made
and return to the main page.
The router will try to detect whether its possible to obtain the IPv6 Internet connection
type automatically. If this succeeds then the user will be guided through the input of
the appropriate parameters for the connection type found.
D-Link DIR-626L User Manual
57
Section 3 - Configuration
However, if the automatic detection fails, the user will be prompt to either Try
again or to click on the Guide me through the IPv6 settings button to initiate the
manual continual of the wizard.
There are several connection types to choose from. If you are unsure of your
connection method, please contact your IPv6 Internet Service Provider.
Note: If using the PPPoE option, you will need to ensure that any PPPoE client
software on your computers has been removed or disabled. The 3 options available
on this page are IPv6 over PPPoE, Static IPv6 address and Route, and Tunneling
Connection.
Choose the required IPv6 Internet Connection type and click on the Next button
to continue. Click on the Prev button to return to the previous page. Click on the
Cancel button to discard all the changes made and return to the main page.
Click on the Next button to continue. Click on the Prev button to return to the previous page.
Click on the Cancel button to discard all the changes made and return to the main page.
D-Link DIR-626L User Manual
58
Section 3 - Configuration
IPv6 over PPPoE
After selecting the IPv6 over PPPoE option, the user will be able to configure the
IPv6 Internet connection that requires a username and password to get online.
Most DSL modems use this type of connection.
The following parameters will be available for configuration:
PPPoE Session: Select the PPPoE Session value used here. This
option will state that this connection shares it’s
information with the already configured IPv6
PPPoE connection, or the user can create a new
PPPoE connection here.
User Name: Enter the PPPoE username used here. If you do not
know your user name, please contact your ISP.
Password: Enter the PPPoE password used here. If you do not
know your password, please contact your ISP.
Verify Password: Re-enter the PPPoE password used here.
Service Name: Enter the service name for this connection here.
This option is optional.
D-Link DIR-626L User Manual
59
Section 3 - Configuration
Static IPv6 Address Connection
This mode is used when your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your
IPv6 configuration settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS
Server. Your ISP provides you with all this information.
Use Link-Local The Link-local address is used by nodes and routers when
Address: communicating with neighboring nodes on the same link.
This mode enables IPv6-capable devices to communicate
with each other on the LAN side.
IPv6 Address: Enter the WAN IPv6 address for the router here.
Subnet Prefix Enter the WAN subnet prefix length value used here.
Length:
Default Gateway: Enter the WAN default gateway IPv6 address used here.
Primary IPv6 DNS Enter the WAN primary DNS Server address used here.
Address:
Secondary IPv6 Enter the WAN secondary DNS Server address used here.
DNS Address:
LAN IPv6 Address: These are the settings of the LAN (Local Area Network)
IPv6 interface for the router. The router’s LAN IPv6 Address
configuration is based on the IPv6 Address and Subnet
assigned by your ISP. (A subnet with prefix /64 is supported
in LAN.)
D-Link DIR-626L User Manual
60
Section 3 - Configuration
Tunneling Connection (6rd)
After selecting the Tunneling Connection (6rd) option, the user can configure the IPv6 6rd connection settings.
The following parameters will be available for configuration:
6rd IPv6 Prefix: Enter the 6rd IPv6 address and prefix value used
here.
IPv4 Address: Enter the IPv4 address used here.
Mask Length: Enter the IPv4 mask length used here.
Assigned IPv6 Prefix: Displays the IPv6 assigned prefix value here.
6rd Border Relay IPv4 Enter the 6rd border relay IPv4 address used here.
Address:
IPv6 DNS Server: Enter the primary DNS Server address used here.
The IPv6 Internet Connection Setup Wizard is complete.
Click on the Connect button to continue. Click on the Prev button to return to
the previous page. Click on the Cancel button to discard all the changes made
and return to the main page.
D-Link DIR-626L User Manual
61
Section 3 - Configuration
IPv6 Manual Setup
There are several connection types to choose from: Auto Detection, Static IPv6, Autoconfiguration (SLAAC/DHCPv6), PPPoE,
IPv6 in IPv4 Tunnel, 6to4, 6rd, and Link-local. If you are unsure of your connection method, please contact your IPv6 Internet
Service Provider.
Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed
or disabled.
Auto Detection
Select Auto Detection to have the router detect and automatically
configure your IPv6 setting from your ISP.
D-Link DIR-626L User Manual
62
Section 3 - Configuration
Static IPv6
My IPv6 Connection: Select Static IPv6 from the drop-down menu.
WAN IPv6 Address Enter the address settings supplied by your Internet provider
Settings: (ISP).
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address: Displays the Router’s LAN Link-Local Address.
Enable Check to enable the Autoconfiguration feature.
Autoconfiguration:
Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC +
Stateless DHCPv6.
IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your
Start: local computers.
IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your
End: local computers.
IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes).
D-Link DIR-626L User Manual
63
Section 3 - Configuration
Autoconfiguration
My IPv6 Connection: Select Autoconfiguration (Stateless/DHCPv6) from the
drop-down menu.
IPv6 DNS Settings: Select either Obtain DNS server address automatically or
Use the following DNS Address.
Primary/Secondary DNS Enter the primary and secondary DNS server addresses.
Address:
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address: Displays the Router’s LAN Link-Local Address.
Enable Check to enable the Autoconfiguration feature.
Autoconfiguration:
Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC +
Stateless DHCPv6.
IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your
Start: local computers.
IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your
End: local computers.
IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes).
D-Link DIR-626L User Manual
64
Section 3 - Configuration
PPPoE
My IPv6 Connection: Select PPPoE from the drop-down menu.
PPPoE: Enter the PPPoE account settings supplied by your Internet
provider (ISP).
Address Mode: Select Static if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic.
IP Address: Enter the IP address (Static PPPoE only).
User Name: Enter your PPPoE user name.
Password: Enter your PPPoE password and then retype the password in the
next box.
Service Name: Enter the ISP Service Name (optional).
Reconnection Mode: Select either Always-on, On-Demand, or Manual.
Maximum Idle Time: Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1492 is the default MTU.
IPv6 DNS Settings: Select either Obtain DNS server address automatically or Use
the following DNS Address.
Primary/Secondary DNS Enter the primary and secondary DNS server addresses.
Address:
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address: Displays the Router’s LAN Link-Local Address.
Enable Autoconfiguration: Check to enable the Autoconfiguration feature.
D-Link DIR-626L User Manual
65
Section 3 - Configuration
Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6.
IPv6 Address Range Start: Enter the start IPv6 Address for the DHCPv6 range for your local computers.
IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your local computers.
IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes).
D-Link DIR-626L User Manual
66
Section 3 - Configuration
IPv6 in IPv4 Tunneling
My IPv6 Select IPv6 in IPv4 Tunnel from the drop-down menu.
Connection:
IPv6 in IPv4 Tunnel Enter the settings supplied by your Internet provider (ISP).
Settings:
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Displays the Router’s LAN Link-Local Address.
Address:
Enable Check to enable the Autoconfiguration feature.
Autoconfiguration:
Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Type: DHCPv6.
IPv6 Address Enter the start IPv6 Address for the DHCPv6 range for your local
Range Start: computers.
IPv6 Address Enter the end IPv6 Address for the DHCPv6 range for your local
Range End: computers.
Pv6 Address Enter the Router Advertisement Lifetime (in minutes).
Lifetime:
D-Link DIR-626L User Manual
67
Section 3 - Configuration
6 to 4 Tunneling
My IPv6 Connection: Select 6 to 4 from the drop-down menu.
6 to 4 Settings: Enter the IPv6 settings supplied by your Internet provider (ISP).
Primary/Secondary Enter the primary and secondary DNS server addresses.
DNS Address:
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Displays the Router’s LAN Link-Local Address.
Address:
Enable Check to enable the Autoconfiguration feature.
Autoconfiguration:
Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Type: DHCPv6.
IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your local
Start: computers.
IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local
End: computers.
IPv6 Address Enter the IPv6 Address Lifetime (in minutes).
Lifetime:
D-Link DIR-626L User Manual
68
Section 3 - Configuration
6rd
My IPv6 Connection: Select 6rd from the drop-down menu.
6RD Settings: Enter the address settings supplied by your Internet provider
(ISP).
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address: Displays the Router’s LAN Link-Local Address.
Enable Check to enable the Autoconfiguration feature.
Autoconfiguration:
Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC+RDNSS or SLAAC + Stateless
DHCPv6.
Router Advertisement Enter the Router Advertisement Lifetime (in minutes).
Lifetime:
D-Link DIR-626L User Manual
69
Section 3 - Configuration
Link-Local Connectivity
My IPv6 Connection: Select Link-Local Only from the drop-down
menu.
LAN IPv6 Address Displays the IPv6 address of the router.
Settings:
D-Link DIR-626L User Manual
70
Section 3 - Configuration
mydlink Settings
mydlink Service: Display the status whether your device is registered with a
mydlink account or not.
Register mydlink Click to go to the mydlink website to register or edit your
Settings: settings.
D-Link DIR-626L User Manual
71
Section 3 - Configuration
Advanced
Virtual Server
This will allow you to open a single port. If you would like to open a range of ports, refer to the next page.
Name: Enter a name for the rule or select an application from
the drop-down menu. Select an application and click
<< to populate the fields.
IP Address: Enter the IP address of the computer on your local
network that you want to allow the incoming
service to. If your computer is receiving an IP address
automatically from the router (DHCP), you computer
will be listed in the “Computer Name” drop-down
menu. Select your computer and click <<.
Private Port/ Enter the port that you want to open next to Private
Public Port: Port and Public Port. The private and public ports are
usually the same. The public port is the port seen from
the Internet side, and the private port is the port being
used by the application on the computer within your
local network.
Protocol Type: Select TCP, UDP, or Both from the drop-down menu.
Schedule: The schedule of time when the Virtual Server Rule
will be enabled. The schedule may be set to Always,
which will allow the particular service to always be
enabled. You can create your own times in the Tools
> Schedules section.
Inbound Filter: Select Allow All (most common) or a created Inbound
filter. You may create your own inbound filters in the
Advanced > Inbound Filter page.
D-Link DIR-626L User Manual
72
Section 3 - Configuration
Port Forwarding
This will allow you to open a single port or a range of ports.
Name: Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click << to populate the fields.
IP Address: Enter the IP address of the computer on your local
network that you want to allow the incoming service
to. If your computer is receiving an IP address
automatically from the router (DHCP), you computer
will be listed in the “Computer Name” drop-down
menu. Select your computer and click <<.
TCP/UDP: Enter the TCP and/or UDP port or ports that you
want to open. You can enter a single port or a range
of ports. Separate ports with a common.
Example: 24,1009,3000-4000
Schedule: The schedule of time when the Virtual Server Rule
will be enabled. The schedule may be set to Always,
which will allow the particular service to always be
enabled. You can create your own times in the Tools
> Schedules section.
Inbound Filter: Select Allow All (most common) or a created
Inbound filter. You may create your own inbound
filters in the Advanced > Inbound Filter page.
D-Link DIR-626L User Manual
73
Section 3 - Configuration
Application Rules
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others.
These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of
these applications work with the DIR-626L. If you need to run applications that require multiple connections, specify the port
normally associated with an application in the “Trigger Port” field, select the protocol type as TCP or UDP, then enter the firewall
(public) ports associated with the trigger port to open them for inbound traffic.
The DIR-626L provides some predefined applications in the table on the bottom of the web page. Select the application you
want to use and enable it.
Name: Enter a name for the rule. You may select a
pre-defined application from the drop-down menu
and click <<.
Trigger: This is the port used to trigger the application. It
can be either a single port or a range of ports.
Traffic Type: Select the protocol of the trigger port (TCP, UDP,
or Both).
Firewall: This is the port number on the Internet side that
will be used to access the application. You may
define a single port or a range of ports. You can use
a comma to add multiple ports or port ranges.
Traffic Type: Select the protocol of the firewall port (TCP, UDP,
or Both).
Schedule: The schedule of time when the Application Rule
will be enabled. The schedule may be set to Always,
which will allow the particular service to always
be enabled. You can create your own times in the
Tools > Schedules section.
D-Link DIR-626L User Manual
74
Section 3 - Configuration
QoS Engine
The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are
disabled and application priority is not classified automatically.
Enable QoS Engine: This option is disabled by default. Enable this option for better performance
and experience with online games and other interactive applications, such
as VoIP.
Automatic Uplink
Speed: This option is enabled by default when the QoS Engine option is enabled. This
option will allow your router to automatically determine the uplink speed of
your Internet connection.
Measured Uplink This displays the detected uplink speed.
Speed:
Manual Uplink Speed: The speed at which data can be transferred from the router to your ISP. This
is determined by your ISP. ISP’s often speed as a download/upload pair.
For example, 1.5Mbits/284Kbits. Using this example, you would enter 284.
Alternatively you can test your uplink speed with a service such as speedtest.net.
QoS Engine Rules: A QoS Engine Rule identifies a specific message flow and assigns a priority
to that flow. For most applications, automatic classification will be adequate,
and specific QoS Engine Rules will not be required.
The QoS Engine supports overlaps between rules, where more than one rule
can match for a specific message flow. If more than one rule is found to match
the rule with the highest priority will be used.
Name: Create a name for the rule that is meaningful to you.
Priority: The priority of the message flow is entered here -- 1 receives the highest priority (most urgent) and 255 receives the lowest priority (least urgent).
Protocol: The protocol used by the messages.
Local IP Range: The rule applies to a flow of messages whose LAN-side IP address falls within the range set here.
Local Port Range: The rule applies to a flow of messages whose LAN-side port number is within the range set here.
Remote IP Range: The rule applies to a flow of messages whose WAN-side IP address falls within the range set here.
Remote Port Range: The rule applies to a flow of messages whose WAN-side port number is within the range set here.
D-Link DIR-626L User Manual
75
Section 3 - Configuration
Network Filters
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.
Configure MAC Select Turn MAC Filtering Off, Allow MAC addresses
Filtering: listed below, or Deny MAC addresses listed below
from the drop-down menu.
MAC Address: Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer
to the Networking Basics section in this manual.
DHCP Client: Select a DHCP client from the drop-down menu and
click << to copy that MAC Address.
Clear: Click to remove the MAC address.
D-Link DIR-626L User Manual
76
Section 3 - Configuration
Access Control
The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls to
only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like P2P
utilities or games.
Add Policy: Click the Add Policy button to start the Access
Control Wizard.
Access Control Wizard
Click Next to continue with the wizard.
D-Link DIR-626L User Manual
77
Section 3 - Configuration
Enter a name for the policy and then click Next to continue.
Select a schedule (I.E. Always) from the drop-down menu and
then click Next to continue.
Enter the following information and then click Next to continue.
• Address Type - Select IP address, MAC address, or Other
Machines.
• IP Address - Enter the IP address of the computer you want to
apply the rule to.
• Machine Address - Enter the PC MAC address (i.e. 00:00.00.00.00).
Select the filtering method and then click Next to continue.
D-Link DIR-626L User Manual
78
Section 3 - Configuration
Enter the rule:
Enable - Check to enable the rule.
Name - Enter a name for your rule.
Dest IP Start - Enter the starting IP address.
Dest IP End - Enter the ending IP address.
Protocol - Select the protocol.
Dest Port Start - Enter the starting port number.
Dest Port End - Enter the ending port number.
To enable web logging, click Enable.
Click Save to save the access control rule.
Your newly created policy will now show up under Policy Table.
D-Link DIR-626L User Manual
79
Section 3 - Configuration
Website Filters
Website Filters are used to allow you to set up a list of Web sites that can be viewed by multiple users through the network.
To use this feature select to Allow or Deny, enter the domain or website and click Save Settings. You must also select Apply
Web Filter under the Access Control section.
Add Website Select either DENY computers access to ONLY
Filtering Rule: these sites or ALLOW computers access to ONLY
these sites.
Website URL/ Enter the keywords or URLs that you want to allow
Domain: or block. Click Save Settings.
D-Link DIR-626L User Manual
80
Section 3 - Configuration
Inbound Filters
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can
configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual
Server, Port Forwarding, or Remote Administration features.
Name: Enter a name for the inbound filter rule.
Action: Select Allow or Deny.
Enable: Check to enable rule.
Remote IP Start: Enter the starting IP address. Enter 0.0.0.0 if you
do not want to specify an IP range.
Remote IP End: Enter the ending IP address. Enter 255.255.255.255
if you do not want to specify and IP range.
Add: Click the Add button to apply your settings. You
must click Save Settings at the top to save the
settings.
Inbound Filter This section will list any rules that are created. You
Rules List: may click the Edit icon to change the settings or
enable/disable the rule, or click the Delete icon
to remove the rule.
D-Link DIR-626L User Manual
81
Section 3 - Configuration
Firewall Settings
A firewall protects your network from the outside world. The DIR-626L offers a firewall type functionality. The SPI feature helps
prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain types of applications.
If you choose to expose a computer, you can enable DMZ. DMZ is short for Demilitarized Zone. This option will expose the
chosen computer completely to the outside world.
Enable SPI: SPI (Stateful Packet Inspection, also known as dynamic packet filtering)
helps to prevent cyber attacks by tracking more state per session. It
validates that the traffic passing through the session conforms to the
protocol.
Anti-Spoof Check: Enable this feature to protect your network from certain kinds of
“spoofing” attacks.
Enable DMZ: If an application has trouble working from behind the router, you can
expose one computer to the Internet and run the application on that
computer.
Note: Placing a computer in the DMZ may expose that computer to a
variety of security risks. Use of this option is only recommended as a last
resort.
DMZ IP Address: Specify the IP address of the computer on the LAN that you want to have
unrestricted Internet communication. If this computer obtains it’s IP
address automatically using DHCP, be sure to make a static reservation
on the Setup > Network Settings page so that the IP address of the
DMZ machine does not change.
PPTP: Allows multiple machines on the LAN to connect to their corporate network using PPTP protocol.
IPSEC (VPN): Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through
NAT. This ALG may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network,
try turning this ALG off. Please check with the system administrator of your corporate network whether your VPN client supports
NAT traversal.
D-Link DIR-626L User Manual
82
Section 3 - Configuration
RTSP: Allows application that uses Real Time Streaming Protocol to receive streaming media from the Internet. QuickTime and Real Player
are some of the common applications using this protocol.
SIP: Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have
the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are
having trouble making VoIP calls, try turning this ALG off.
D-Link DIR-626L User Manual
83
Section 3 - Configuration
Routing
The Routing option is an advanced method of customizing specific routes of data through your network.
Name: Enter a name for your route.
Destination IP: Enter the IP address of packets that will take this
route.
Netmask: Enter the netmask of the route, please note
that the octets must match your destination IP
address.
Gateway: Enter your next hop gateway to be taken if this
route is used.
Metric: The route metric is a value from 1 to 16 that
indicates the cost of using this route. A value 1 is
the lowest cost and 15 is the highest cost.
Interface: Select the interface that the IP packet must use to
transit out of the router when this route is used.
D-Link DIR-626L User Manual
84
Section 3 - Configuration
Advanced Wireless
Transmit Power: Set the transmit power of the antennas.
WLAN Partition: This enables 802.11d operation. 802.11d is a wireless
specification developed to allow implementation of
wireless networks in countries that cannot use the
802.11 standard. This feature should only be enabled
if you are in a country that requires it.
WMM Enable: WMM is QoS for your wireless network. This will
improve the quality of video and voice applications
for your wireless clients.
HT20/40 Coexistence: Enable this option to reduce interference from
other wireless networks in your area. If the channel
width is operating at 40MHz and there is another
wireless network’s channel over-lapping and causing
interference, the router will automatically change to
20MHz.
D-Link DIR-626L User Manual
85
Section 3 - Configuration
Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) System is a simplified method for securing your wireless network during the “Initial setup” as well
as the “Add New Device” processes. The Wi-Fi Alliance (WFA) has certified it across different products as well as manufactures.
The process is just as easy as pressing a button for the Push-Button Method or correctly entering the 8-digit code for the Pin
Code Method. The time reduction in setup and ease of use are quite beneficial, while the highest wireless Security setting of
WPA2 is automatically used.
Enable: Enable the Wi-Fi Protected Setup feature.
Note: if this option is unchecked, the WPS button on the
side of the router will be disabled.
Disable WPS-PIN Check to disable the WPS PIN method of securing your
Method: network. This will not affect the Push-Button method.
PIN Settings: A PIN is a unique number that can be used to add
the router to an existing network or to create a new
network. Only the Administrator (“admin” account) can
change or reset the PIN.
Current PIN: Shows the current PIN.
Reset PIN to Restore the default PIN of the router.
Default:
Generate New Create a random number that is a valid PIN. This
PIN: becomes the router’s PIN. You can then copy this PIN to
the user interface of the wireless client.
D-Link DIR-626L User Manual
86
Section 3 - Configuration
Add Wireless This Wizard helps you add wireless devices to the wireless network.
Station:
The wizard will either display the wireless network settings to guide you through manual configuration, prompt you to enter the
PIN for the device, or ask you to press the configuration button on the device. If the device supports Wi-Fi Protected Setup and has a
configuration button, you can add it to the network by pressing the configuration button on the device and then the on the router
within 60 seconds. The status LED on the router will flash three times if the device has been successfully added to the network.
There are several ways to add a wireless device to your network. A “registrar” controls access to the wireless network. A registrar
only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on the
device. The router acts as a registrar for the network, although other devices may act as a registrar as well.
Add Wireless Click to start the wizard and skip to page 44.
Device Wizard:
WPS Button
You can also simply press the WPS button on the side of the router, and then press the WPS
button on your wireless client to automatically connect without logging into the router.
Refer to page 109 for more information.
D-Link DIR-626L User Manual
WPS Button
87
Section 3 - Configuration
Advanced Network Settings
Enable UPnP: To use the Universal Plug and Play (UPnP™) feature click on
Enabled. UPnP provides compatibility with networking
equipment, software and peripherals.
WAN Ping: Checking the box will allow the DIR-626L to respond
to pings. Unchecking the box may provide some extra
security from hackers.
WAN Ping Inbound Select from the drop-down menu if you would like to apply
Filter: the Inbound Filter to the WAN ping. Refer to the Inbound
Filters section for more information.
Enable IPV4 Check the box to allow multicast traffic to pass through
Multicast Streams: the router from the Internet (IPv4).
Enable IPV6 Check the box to allow multicast traffic to pass through
Multicast Streams: the router from the Internet (IPv6).
D-Link DIR-626L User Manual
88
Section 3 - Configuration
Guest Zone
The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones
will be separate from your main wireless network. You may configure different zones for the 2.4GHz wireless band.
Enable Guest Check to enable the Guest Zone feature.
Zone:
Schedule: The schedule of time when the Guest Zone will be
active. The schedule may be set to Always, which will
allow the particular service to always be enabled. You
can create your own times in the Tools > Schedules
section or click Add New.
Wireless Enter a wireless network name (SSID) that is different
Network Name: from your main wireless network.
Enable Routing Check to allow network connectivity between the
Between Zones: different zones created.
Security Mode: Select the type of security or encryption you would
like to enable for the guest zone.
D-Link DIR-626L User Manual
89
Section 3 - Configuration
IPv6 Firewall
The DIR-626L’s IPv6 Firewall feature allows you to configure which kind of IPv6 traffic is allowed to pass through the device.
The DIR-626L’s IPv6 Firewall functions in a similar way to the IP Filters feature.
Enable Checkbox: Check the box to enable the IPv6 firewall simple security.
Configure IPv6 Select an action from the drop-down menu.
Firewall:
Name: Enter a name to identify the IPv6 firewall rule.
Schedule: Use the drop-down menu to select the time schedule that
the IPv6 Firewall Rule will be enabled on. The schedule may
be set to Always, which will allow the particular service to
always be enabled. You can create your own times in the
Tools > Schedules section.
Source: Use the Source drop-down menu to specify the interface
that connects to the source IPv6 addresses of the firewall
rule.
IP Address Range: Enter the source IPv6 address range in the adjacent IP Address Range field.
Dest: Use the Dest drop-down menu to specify the interface that connects to the destination IP addresses of the firewall rule.
Protocol: Select the protocol of the firewall port (All, TCP, UDP, or ICMP).
Port Range: Enter the first port of the range that will be used for the firewall rule in the first box and enter the last port in the field in the second
box.
D-Link DIR-626L User Manual
90
Section 3 - Configuration
IPv6 Routing
This page allows you to specify custom routes that determine how data is moved around your network.
Route List: Check the box next to the route you wish to enable.
Name: Enter a specific name to identify this route.
Destination IP/ This is the IP address of the router used to reach the
Prefix Length: specified destination or enter the IPv6 address prefix
length of the packets that will take this route.
Metric: Enter the metric value for this rule here.
Interface: Use the drop-down menu to specify if the IP packet
must use the WAN or LAN interface to transit out of
the Router.
Gateway: Enter the next hop that will be taken if this route is used.
D-Link DIR-626L User Manual
91
Section 3 - Configuration
Tools
Admin
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are
two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin
has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the
admin account has the ability to change both admin and user account passwords.
Admin Password: Enter a new password for the Administrator Login Name. The administrator
can make changes to the settings.
User Password: Enter the new password for the User login. If you login as the User, you cannot
change the settings (you can only view them).
System Name: Enter a name for your router.
Enable Graphical Enables a challenge-response test to require users to type letters or numbers
Authentication: from a distorted image displayed on the screen to prevent online hackers and
unauthorized users from gaining access to your router’s network settings.
Enable HTTPS Check to enable HTTPS to connect to the router securely. This means to connect
Server: to the router, you must enter https://192.168.0.1 (for example) instead of
http://192.168.0.1.
Enable Remote Remote management allows the DIR-626L to be configured from the Internet
Management: by a web browser. A username/password is still required to access the Web
Management interface.
Remote Admin Port: The port number used to access the DIR-626L is used in the URL. Example:
http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-626L
and 8080 is the port used for the Web Management interface.
If you have enabled HTTPS Server, you must enter https:// as part of the URL
to access the router remotely.
Remote Admin This section will list any rules that are created. You may click the Edit icon to
Inbound Filter: change the settings or enable/disable the rule, or click the Delete icon to
remove the rule. Details will display the current status.
D-Link DIR-626L User Manual
92
Section 3 - Configuration
Time
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock.
From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to
automatically adjust the time when needed.
Time: Displays the current date and time of the router.
Time Zone: Select your Time Zone from the drop-down
menu.
Enable Daylight To select Daylight Saving time manually, select
Saving: enabled or disabled, and enter a start date and
an end date for daylight saving time.
Enable NTP Server: NTP is short for Network Time Protocol. A NTP
server will synch the time and date with your
router. This will only connect to a server on the
Internet, not a local server. Check the box to
enable this feature.
NTP Server Used: Enter the IP address of a NTP server or select one
from the drop-down menu.
Manual: To manually input the time, enter the values
in these fields for the Year, Month, Day, Hour,
Minute, and Second and then click Set Time.
You can also click Copy Your Computer’s Time
Settings to synch the date and time with the
computer you are currently on.
D-Link DIR-626L User Manual
93
Section 3 - Configuration
SysLog
The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs to a
SysLog server on your network.
Enable Logging to Check this box to send the router logs to a SysLog
SysLog Server: Server.
SysLog Server IP The address of the SysLog server that will be
Address: used to send the logs. You may also select your
computer from the drop-down menu (only if
receiving an IP address from the router via DHCP).
D-Link DIR-626L User Manual
94
Section 3 - Configuration
Email Settings
The Email feature can be used to send the system log files, router alert messages, and firmware update notification to your
email address.
Enable Email When this option is enabled, router activity logs are emailed to a
Notification: designated email address.
From Email Address: This email address will appear as the sender when you receive a log
file or firmware upgrade notification via email.
To Email Address: Enter the email address where you want the email sent.
SMTP Server Address: Enter the SMTP server address for sending email.
SMTP Server Port: Enter the SMTP port used on the server.
Enable Authentication: Check this box if your SMTP server requires authentication.
Account Name: Enter your account for sending email.
Password: Enter the password associated with the account. Re-type the
password associated with the account.
On Log Full: When this option is selected, logs will be sent via email to your
account when the log is full.
On Schedule: Selecting this option will send the logs via email according to
schedule.
Schedule: This option is enabled when On Schedule is selected. You can select
a schedule from the list of defined schedules. To create a schedule,
go to Tools > Schedules.
Real-Time Browsing Check to enable browsing history (for mydlink Lite app).
History:
Push Event: Check to enable and select which alerts to be sent to your mobile
device (for mydlink Lite app).
Event Trigger: Check to enable event triggering (for mydlink Lite app).
D-Link DIR-626L User Manual
95
Section 3 - Configuration
System
This section allows you to manage the router’s configuration settings, reboot the router, and restore the router to the factory
default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.
Save Settings to Use this option to save the current router
Local Hard Drive: configuration settings to a file on the hard disk of
the computer you are using. First, click the Save
button. A file dialog will appear, allowing you to
select a location and file name for the settings.
Load Settings Use this option to load previously saved router
from Local Hard configuration settings. First, use the Browse option
Drive: to find a previously saved file of configuration
settings. Then, click the Load button to transfer
those settings to the router.
Restore to This option will restore all configuration settings
Factory Default back to the settings that were in effect at the
Settings: time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router configuration
settings, use the Save button above.
Reboot Device: Click to reboot the router.
D-Link DIR-626L User Manual
96
Section 3 - Configuration
Firmware
You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard drive of
the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support website
for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from this site.
Browse: After you have downloaded the new firmware, click
Browse to locate the firmware update on your hard
drive. Click Upload to complete the firmware upgrade.
Upload: Once you have a firmware update on your computer,
use this option to browse for the file and then upload
the information into the access point.
Language Pack
You can change the language of the web UI by uploading
available language packs.
Browse: After you have downloaded the new language pack,
click Browse to locate the language pack file on your
hard drive. Click Upload to complete the language
pack upgrade.
D-Link DIR-626L User Manual
97
Section 3 - Configuration
Dynamic DNS
The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have purchased
(www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign
dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in your domain name to connect to
your server no matter what your IP address is.
Enable Dynamic Domain Name System is a method of
Dynamic DNS: keeping a domain name linked to a changing IP
Address. Check the box to enable DDNS.
Server Select your DDNS provider from the drop-down
Address: menu or enter the DDNS server address.
Host Name: Enter the Host Name that you registered with
your DDNS service provider.
Username or Enter the Username or key for your DDNS
Key: account.
Password or Enter the Password or key for your DDNS account.
Key:
Timeout: Enter a timeout time (in hours).
Status: Displays the current connection status.
D-Link DIR-626L User Manual
98
Section 3 - Configuration
System Check
Ping Test: The Ping Test is used to send Ping packets to test if a
computer is on the Internet. Enter the IP address that you
wish to Ping and click Ping.
IPv6 Ping Test: Enter the IPv6 address that you wish to Ping and click Ping.
Ping Results: The results of your ping attempts will be displayed here.
D-Link DIR-626L User Manual
99
Section 3 - Configuration
Schedules
Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to
8pm, you could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm.
Name: Enter a name for your new schedule.
Days: Select a day, a range of days, or All Week to include
every day.
Time: Check All Day - 24hrs or enter a start and end
time for your schedule.
Save: You must click Save Settings at the top for your
schedules to go into effect.
Schedule Rules The list of schedules will be listed here. Click the
List: Edit icon to make changes or click the Delete icon
to remove the schedule.
D-Link DIR-626L User Manual
100
Section 3 - Configuration
Status
Device Info
This page displays the current information for the DIR-626L. It will display the LAN, WAN (Internet), and Wireless information.
If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed.
Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect
to drop the PPPoE connection and use Connect to establish the PPPoE connection.
General: Displays the router’s time and firmware version.
WAN: Displays the MAC address and the public IP settings
LAN: Displays the MAC address and the private (local) IP settings for the router.
Wireless LAN: Displays the wireless MAC address and your wireless settings such as SSID and
Channel.
LAN Computers: Displays computers and devices that are connected to the router via Ethernet
and that are receiving an IP address assigned by the router (DHCP).
D-Link DIR-626L User Manual
101
Section 3 - Configuration
Logs
The router automatically logs (records) events of possible interest in it’s internal memory. If there isn’t enough internal memory
for all events, logs of older events are deleted but logs of the latest events are retained. The Logs option allows you to view
the router logs. You can define what types of events you want to view and the level of the events to view. This router also has
external Syslog Server support so you can send the log files to a computer on your network that is running a Syslog utility.
Log Options: You can select the types of messages that you want
to display from the log. System Activity, Debug
Information, Attacks, Dropped Packets, and Notice
messages can be selected. Click Apply Log Settings
Now to activate your settings.
Refresh: Updates the log details on the screen so it displays any
recent activity.
First Page: Click to go to the first page.
Last Page: Click to go to the last page.
Previous: Click to go back one page.
Next: Click to go to the next page.
Clear: Clears all of the log contents.
Email Now: This option will send a copy of the router log to your
email address configured in the Tools > Email Settings
screen.
Save Log: This option will save the router log to a file on your
computer.
D-Link DIR-626L User Manual
102
Section 3 - Configuration
Statistics
The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-626L on both
the WAN, LAN ports and the wireless segment. The traffic counter will reset if the device is rebooted.
D-Link DIR-626L User Manual
103
Section 3 - Configuration
Internet Sessions
The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a
conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer.
D-Link DIR-626L User Manual
104
Section 3 - Configuration
Routing
This page will display your current routing table.
D-Link DIR-626L User Manual
105
Section 3 - Configuration
Wireless
The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and
MAC address of the connected wireless clients.
D-Link DIR-626L User Manual
106
Section 3 - Configuration
IPv6
The IPv6 page displays a summary of the Router’s IPv6 settings and lists the IPv6 address and host name of any IPv6 clients.
D-Link DIR-626L User Manual
107
Section 3 - Configuration
IPV6 Routing
This page displays the IPV6 routing details configured for your router.
D-Link DIR-626L User Manual
108
Section 3 - Configuration
Support
D-Link DIR-626L User Manual
109
Section 4 - Security
Connect a Wireless Client to your Router
WPS Button
The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DIR-626L router. Please refer to your user manual for the
wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DIR-626L for about 1 second. The Internet LED on the front will start to blink.
WPS Button
Step 2 - Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS
process).
Step 3 - Allow up to 1 minute to configure. Once the Internet light stops blinking, you will be connected and your wireless
connection will be secure with WPA2.
D-Link DIR-626L User Manual
110
Section 4 - Security
Windows® 7
WPA/WPA2
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
Wireless Icon
2. The utility will display any available wireless networks in your area.
D-Link DIR-626L User Manual
111
Section 4 - Security
3. Highlight the wireless connection with Wi-Fi name (SSID) you would
like to connect to and click the Connect button.
If you get a good signal but cannot access the Internet, check your
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
4. The following window appears while your computer tries to
connect to the router.
D-Link DIR-626L User Manual
112
Section 4 - Security
5. Enter the same security key or passphrase (Wi-Fi password) that is
on your router and click Connect. You can also connect by pushing
the WPS button on the router.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct. The
key or passphrase must be exactly the same as on the wireless router.
D-Link DIR-626L User Manual
113
Section 4 - Security
WPS
The WPS feature of the DIR-626L can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to
configure the WPS feature:
1. Click the Start button and select Computer from the Start menu.
2. Click Network on the left side.
D-Link DIR-626L User Manual
114
Section 4 - Security
3. Double-click the DIR-626L.
4. Input the WPS PIN number (displayed in the WPS window on the
Router’s LCD screen or in the Setup > Wireless Setup menu in
the Router’s Web UI) and click Next.
D-Link DIR-626L User Manual
115
Section 4 - Security
5. Type a name to identify the network.
6. To configure advanced settings, click the
icon.
Click Next to continue.
D-Link DIR-626L User Manual
116
Section 4 - Security
7. The following window appears while the Router is being
configured.
Wait for the configuration to complete.
8. The following window informs you that WPS on the router has
been setup successfully.
Make a note of the security key as you may need to provide this
security key if adding an older wireless device to the network in
the future.
9. Click Close to complete WPS setup.
D-Link DIR-626L User Manual
117
Section 5 - Connecting to a Wireless Network
Windows Vista®
Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility, please refer to the user
manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option
similar to the Windows Vista® utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lower-right
corner next to the time). Select Connect to a network.
The utility will display any available wireless networks in your area. Click
on a network (displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check you TCP/
IP settings for your wireless adapter. Refer to the Networking Basics
section in this manual for more information.
D-Link DIR-626L User Manual
118
Section 5 - Connecting to a Wireless Network
WPA/WPA2
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Open the Windows Vista® Wireless Utility by right-clicking on the
wireless computer icon in your system tray (lower right corner of
screen). Select Connect to a network.
2. Highlight the Wi-Fi name (SSID) you would like to connect to and
click Connect.
D-Link DIR-626L User Manual
119
Section 5 - Connecting to a Wireless Network
3. Enter the same security key or passphrase (Wi-Fi password) that is on
your router and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct. The
key or passphrase must be exactly the same as on the wireless router.
D-Link DIR-626L User Manual
120
Section 5 - Connecting to a Wireless Network
WPS/WCN 2.0
The router supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista®. The following instructions for setting this up
depends on whether you are using Windows Vista® to configure the router or third party software.
When you first set up the router, Wi-Fi protection is disabled and unconfigured. To enjoy the benefits of Wi-Fi protection, the
router must be both enabled and configured. There are three basic methods to accomplish this: use Windows Vista’s built-in
support for WCN 2.0, use software provided by a third party, or manually configure.
If you are running Windows Vista®, log into the router and click the Enable checkbox in the Basic > Wireless section. Use the
Current PIN that is displayed on the Advanced > Wi-Fi Protected Setup section or choose to click the Generate New PIN
button or Reset PIN to Default button.
If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed
to the next section to set up the newly-configured router.
D-Link DIR-626L User Manual
121
Section 5 - Connecting to a Wireless Network
Windows® XP
Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service
Pack 2 users. If you are using another company’s utility, please refer to the user manual of your wireless adapter for help with
connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lower-right
corner next to the time). Select View Available Wireless Networks.
The utility will display any available wireless networks in your area. Click
on a Wi-Fi network (displayed using the SSID) and click the Connect
button.
If you get a good signal but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
D-Link DIR-626L User Manual
122
Section 5 - Connecting to a Wireless Network
WPA/WPA2
It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are
joining an existing network, you will need to know the WPA key being used.
1. Open the Windows® XP Wireless Utility by right-clicking on the
wireless computer icon in your system tray (lower-right corner
of screen). Select View Available Wireless Networks.
2. Highlight the Wi-Fi network (SSID) you would like to connect
to and click Connect.
D-Link DIR-626L User Manual
123
Section 5 - Connecting to a Wireless Network
3. The Wireless Network Connection box will appear. Enter the WPA-PSK
Wi-Fi password and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the WPA-PSK settings are correct. The
Wi-Fi password must be exactly the same as on the wireless router.
D-Link DIR-626L User Manual
124
Section 6 - Troubleshooting
Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of the DIR-626L. Read the
following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a different
operating system, the screenshots on your computer will look similar to the following examples.
1. Why can’t I access the web-based configuration utility?
When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website nor do you
have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must
be on the same IP subnet to connect to the web-based utility.
• Make sure you have an updated Java-enabled web browser. We recommend the following:
Microsoft Internet Explorer® 7 and higher
Mozilla Firefox 3.5 and higher
Google™ Chrome 8 and higher
Apple Safari 4 and higher
• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a
different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be
on.
• Disable any Internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice, Sygate,
Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included
with your firewall software for more information on disabling or configuring it.
D-Link DIR-626L User Manual
125
Section 6 - Troubleshooting
• Configure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click
the button to restore the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button.
Make sure nothing is checked. Click OK.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
• Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This
should open the login page for your web management.
• If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30
seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the
factory defaults.
To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip
to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30
seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the
password box empty.
D-Link DIR-626L User Manual
126
Section 6 - Troubleshooting
3. Why can’t I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail,
we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc).
To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be
another computer, or a URL.
• Click on Start and then click Run.
• Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and
press Enter (or click OK).
• Once the window opens, you’ll need to do a special ping. Use the following syntax:
ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472
D-Link DIR-626L User Manual
127
Section 6 - Troubleshooting
You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented
packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the
proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480).
Once you find your MTU, you can now configure your router with the proper MTU size.
To change the MTU rate on your router follow the steps below:
• Open your browser, enter the IP address of your router (192.168.0.1) and click OK.
• Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page
for the device.
• Click on Setup and then click Manual Configure.
• To change the MTU enter the number in the MTU field and click Save Settings to save your settings.
• Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments
of ten.
D-Link DIR-626L User Manual
128
Appendix A - Wireless Basics
Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless
connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link
wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able
to enjoy the freedom that wireless networking delivers.
A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of
wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops
and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently.
Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users.
Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop
systems support the same protocols as Ethernet adapter cards.
Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to
use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide
this link.
D-Link DIR-626L User Manual
129
Appendix A - Wireless Basics
What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio
frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network.
Why D-Link Wireless?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link
delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
How does wireless work?
Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But
wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area
to be able to connect your computer. There are two different types of wireless networks Wireless Local Area Network (WLAN),
and Wireless Personal Area Network (WPAN).
Wireless Local Area Network (WLAN)
In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has
a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point
as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles
to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and
many other outdoor venues.
D-Link DIR-626L User Manual
130
Appendix A - Wireless Basics
Wireless Personal Area Network (WPAN)
Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to
30 feet away.
Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as
much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other
devices that operate on batteries.
Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business,
D-Link has a wireless solution for it.
Home
• Gives everyone at home broadband access
• Surf the web, check email, instant message, etc.
• Gets rid of the cables around the house
• Simple and easy to use
Small Office and Home Office
• Stay on top of everything at home as you would at office
• Remotely access your office network from home
• Share Internet connection with multiple computers
• No need to dedicate office space
D-Link DIR-626L User Manual
131
Appendix A - Wireless Basics
Where is wireless used?
Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s becoming
so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public
places is usually called “hotspots”.
Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations
like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.
Wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing where to start.
That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.
Tips
Here are a few things to keep in mind, when you install a wireless network.
Centralize your router or Access Point
Make sure you place the router/access point in a centralized location within your network for the best performance. Try to
place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have
a two-story home, you may need a repeater to boost the signal to extend the range.
Eliminate Interference
Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/
access point. This would significantly reduce any interference that the appliances might cause since they operate on same
frequency.
D-Link DIR-626L User Manual
132
Appendix A - Wireless Basics
Security
Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on
the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up.
Wireless Modes
There are basically two modes of networking:
• Infrastructure – All wireless clients will connect to an access point or wireless router.
• Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network
adapters on each computer, such as two or more DIR-626L wireless network Cardbus adapters.
An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the
wireless router or access point.
An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc
mode to communicate.
D-Link DIR-626L User Manual
133
Appendix B - Networking Basics
Networking Basics
Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP
server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start Search box.)
At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and the
default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation,
security settings, and the settings on your router.
Some firewall software programs may block a DHCP
request on newly installed adapters.
D-Link DIR-626L User Manual
134
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows® 7 Windows Vista®
Windows® XP Windows® 2000 -
Click on Start > Control Panel > Network and Internet > Network and Sharing Center.
Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network
Connections.
Click on Start > Control Panel > Network Connections.
From the desktop, right-click My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet
as your network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X
where X is a number between 2 and 99. Make sure that the number you choose is not
in use on the network. Set the Default Gateway the same as the LAN IP address of your
router (I.E. 192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DIR-626L User Manual
135
Appendix C - Technical Specifications
Technical Specifications
Standards
• IEEE 802.11n
• IEEE 802.11g
• IEEE 802.3
• IEEE 802.3u
Frequency Range2
• 2.412GHz to 2.462GHz
• 2.4GHz to 2.483GHz
Security
• WPA™ - Personal/Enterprise
• WPA2™ - Personal/Enterprise
Humidity
• 95% maximum (non-condensing)
Operating Temperature
• 32°F to 104°F ( 0°C to 40°C)
Wireless Signal Rates1
IEEE 802.11n 2.4GHz(HT20/40):
• 144.4Mbps (300)
· 130Mbps (270)
• 115.6Mbps (240)
· 86.7Mbps (180)
• 72.2Mbps (150)
· 65Mbps (135)
• 57.8Mbps (120)
· 43.3Mbps (90)
• 28.9Mbps (60)
· 21.7Mbps (45)
•14.4Mbps (30)
· 7.2Mbps (15)
IEEE 802.11g:
• 54Mbps
• 48Mbps
• 24Mbps
• 18Mbps
• 11Mbps
• 9Mbps
• 5.5Mbps
• 2Mbps
Safety & Emissions
• FCC
• IC
• CE
• C-Tick
• UL
Dimensions
• L = 11.1 cm
• W = 9.3 cm
• H = 14.5 cm
• 36Mbps
• 12Mbps
• 6Mbps
• 1Mbps
1 Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume
of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.
2 Frequency Range varies depending on country’s regulation
D-Link DIR-626L User Manual
136
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this
equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed
to US operation channels only.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux
conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un
brouillage susceptible de provoquer un fonctionnement indésirable.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body
Declaration d'exposition aux radiations:
Cet equipement est conforme aux limites d'exposition aux rayonnements IC etablies pour un environnement non controle. Cet equipement doit etre installe
et utilise avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
D-Link DIR-626L User Manual
137

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Assemble
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2012:07:03 17:29:12+08:00
Metadata Date                   : 2012:07:26 13:32:21+08:00
Modify Date                     : 2012:07:26 13:32:21+08:00
Creator Tool                    : Adobe InDesign CS4 (6.0.6)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 6592 bytes, use -b option to extract)
Instance ID                     : uuid:c9af5e9b-169e-48d0-8ace-bbac437f941a
Document ID                     : xmp.did:12A58E0C779AE111AE299FD6B2AC11EE
Original Document ID            : adobe:docid:indd:5e8875e4-12a0-11df-9c31-b8a2ca951b65
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:11A58E0C779AE111AE299FD6B2AC11EE
Derived From Document ID        : xmp.did:10A58E0C779AE111AE299FD6B2AC11EE
Derived From Original Document ID: adobe:docid:indd:5e8875e4-12a0-11df-9c31-b8a2ca951b65
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:DF6F95E1105EDF118B19AF795776AE11, xmp.iid:E06F95E1105EDF118B19AF795776AE11, xmp.iid:E16F95E1105EDF118B19AF795776AE11, xmp.iid:E26F95E1105EDF118B19AF795776AE11, xmp.iid:E36F95E1105EDF118B19AF795776AE11, xmp.iid:D1CE43401D5EDF11A17BD412871847BA, xmp.iid:CE13CA1BBE6DDF11BE74F04D776BC22C, xmp.iid:CF13CA1BBE6DDF11BE74F04D776BC22C, xmp.iid:D013CA1BBE6DDF11BE74F04D776BC22C, xmp.iid:D113CA1BBE6DDF11BE74F04D776BC22C, xmp.iid:D213CA1BBE6DDF11BE74F04D776BC22C, xmp.iid:D313CA1BBE6DDF11BE74F04D776BC22C, xmp.iid:D413CA1BBE6DDF11BE74F04D776BC22C, xmp.iid:03647A0CCE6DDF11BE74F04D776BC22C, xmp.iid:04647A0CCE6DDF11BE74F04D776BC22C, xmp.iid:05647A0CCE6DDF11BE74F04D776BC22C, xmp.iid:06647A0CCE6DDF11BE74F04D776BC22C, xmp.iid:482CFE59F273DF11B74A862F0F1FFF2A, xmp.iid:492CFE59F273DF11B74A862F0F1FFF2A, xmp.iid:6958F39B0874DF11BBF3AE7F3D0A9A86, xmp.iid:6A58F39B0874DF11BBF3AE7F3D0A9A86, xmp.iid:6B58F39B0874DF11BBF3AE7F3D0A9A86, xmp.iid:9A5291223FE1DF118AF6C3695856DBBF, xmp.iid:833057DA5BE1DF118AF6C3695856DBBF, xmp.iid:843057DA5BE1DF118AF6C3695856DBBF, xmp.iid:853057DA5BE1DF118AF6C3695856DBBF, xmp.iid:48A9263789B4E011BBF5F8455D63476D, xmp.iid:49A9263789B4E011BBF5F8455D63476D, xmp.iid:4AA9263789B4E011BBF5F8455D63476D, xmp.iid:4DA9263789B4E011BBF5F8455D63476D, xmp.iid:2DBBCC1A18B7E01180E9820FE4D58C5C, xmp.iid:FE6B8A4CABB7E011AF419B1A5341E7F1, xmp.iid:66DD2361DFBEE011BB0DE85F13D1C0B5, xmp.iid:F845CEF079BFE011AFC8AADC664D2646, xmp.iid:95F3AFAA00C2E011BE64BFD8E673BB7B, xmp.iid:3F62CDD7B4C2E0119AE6A4EC0C7C23A4, xmp.iid:6A271D2083C3E011BEDFB3C50B638D30, xmp.iid:6B271D2083C3E011BEDFB3C50B638D30, xmp.iid:6C271D2083C3E011BEDFB3C50B638D30, xmp.iid:E7D8FB613FC4E01184DEC45FD03BFADA, xmp.iid:E8D8FB613FC4E01184DEC45FD03BFADA, xmp.iid:E9D8FB613FC4E01184DEC45FD03BFADA, xmp.iid:EAD8FB613FC4E01184DEC45FD03BFADA, xmp.iid:EBD8FB613FC4E01184DEC45FD03BFADA, xmp.iid:ECD8FB613FC4E01184DEC45FD03BFADA, xmp.iid:EDD8FB613FC4E01184DEC45FD03BFADA, xmp.iid:EED8FB613FC4E01184DEC45FD03BFADA, xmp.iid:85239F7F0EC5E011992FF1E6F0DE9ED2, xmp.iid:86239F7F0EC5E011992FF1E6F0DE9ED2, xmp.iid:FCDF85D58EC7E0118927C14F9B634E9C, xmp.iid:D94DE32240C8E011B15895AFFBD58405, xmp.iid:DA4DE32240C8E011B15895AFFBD58405, xmp.iid:DB4DE32240C8E011B15895AFFBD58405, xmp.iid:EDBF80CDB8CAE0119D21C9AE0D6DB351, xmp.iid:6FC7E2ACFBCCE0118EFFE56E035EEA95, xmp.iid:70C7E2ACFBCCE0118EFFE56E035EEA95, xmp.iid:B801A2F81BCDE0118EFFE56E035EEA95, xmp.iid:C459EDFDB4CDE01182F6B59CA781FF44, xmp.iid:C559EDFDB4CDE01182F6B59CA781FF44, xmp.iid:9AD089F969DEE011A9F2E5774E1F4F07, xmp.iid:9BD089F969DEE011A9F2E5774E1F4F07, xmp.iid:A9C3A2FF1DDFE011B193E877ECEBEF7C, xmp.iid:E1236C43E3DFE011AC30F18C60CE536A, xmp.iid:021E20AEFDDFE011AC30F18C60CE536A, xmp.iid:031E20AEFDDFE011AC30F18C60CE536A, xmp.iid:2BD4D85D88E0E011931C9525593E29CD, xmp.iid:2CD4D85D88E0E011931C9525593E29CD, xmp.iid:2DD4D85D88E0E011931C9525593E29CD, xmp.iid:2ED4D85D88E0E011931C9525593E29CD, xmp.iid:0292AC4BA8E0E011A41AEDDCA12149BD, xmp.iid:0692AC4BA8E0E011A41AEDDCA12149BD, xmp.iid:0792AC4BA8E0E011A41AEDDCA12149BD, xmp.iid:2E97DC8FBEE0E011980DBCC2172670D4, xmp.iid:2F97DC8FBEE0E011980DBCC2172670D4, xmp.iid:45589F01C2E0E0118F64A4A69B43385B, xmp.iid:48589F01C2E0E0118F64A4A69B43385B, xmp.iid:9351BD74F0E2E0119CCDF0257F4911DE, xmp.iid:9451BD74F0E2E0119CCDF0257F4911DE, xmp.iid:9751BD74F0E2E0119CCDF0257F4911DE, xmp.iid:9851BD74F0E2E0119CCDF0257F4911DE, xmp.iid:4BC5D7FA7AE4E011BC4DCAF1B6D0CC65, xmp.iid:4CC5D7FA7AE4E011BC4DCAF1B6D0CC65, xmp.iid:4DC5D7FA7AE4E011BC4DCAF1B6D0CC65, xmp.iid:4EC5D7FA7AE4E011BC4DCAF1B6D0CC65, xmp.iid:4FC5D7FA7AE4E011BC4DCAF1B6D0CC65, xmp.iid:50C5D7FA7AE4E011BC4DCAF1B6D0CC65, xmp.iid:51C5D7FA7AE4E011BC4DCAF1B6D0CC65, xmp.iid:A886061A8CE4E0118882A765A9EB93C3, xmp.iid:A986061A8CE4E0118882A765A9EB93C3, xmp.iid:AA86061A8CE4E0118882A765A9EB93C3, xmp.iid:AE86061A8CE4E0118882A765A9EB93C3, xmp.iid:AF86061A8CE4E0118882A765A9EB93C3, xmp.iid:F74EDD96B4E4E0118882A765A9EB93C3, xmp.iid:F84EDD96B4E4E0118882A765A9EB93C3, xmp.iid:F94EDD96B4E4E0118882A765A9EB93C3, xmp.iid:518C7814BAE4E0118882A765A9EB93C3, xmp.iid:E79A47D1BAE4E011800AF8FB5A25E055, xmp.iid:E89A47D1BAE4E011800AF8FB5A25E055, xmp.iid:CB0CF9B30AE6E011849AEAA40185C3FD, xmp.iid:CC0CF9B30AE6E011849AEAA40185C3FD, xmp.iid:CD0CF9B30AE6E011849AEAA40185C3FD, xmp.iid:CE0CF9B30AE6E011849AEAA40185C3FD, xmp.iid:CF0CF9B30AE6E011849AEAA40185C3FD, xmp.iid:91216F7A13E6E011849AEAA40185C3FD, xmp.iid:6D4CB408FAF4E0118EF3D34B6422C603, xmp.iid:6E4CB408FAF4E0118EF3D34B6422C603, xmp.iid:6F4CB408FAF4E0118EF3D34B6422C603, xmp.iid:704CB408FAF4E0118EF3D34B6422C603, xmp.iid:5250FA89DAF5E011A85887307F40E2CF, xmp.iid:4E25D369F0F5E01187259CA9CC719F8A, xmp.iid:5625D369F0F5E01187259CA9CC719F8A, xmp.iid:3FF95D3A43FBE0119D3E9E11D574F124, xmp.iid:40F95D3A43FBE0119D3E9E11D574F124, xmp.iid:9B00DBAB5EFBE0119D3E9E11D574F124, xmp.iid:9C00DBAB5EFBE0119D3E9E11D574F124, xmp.iid:9D00DBAB5EFBE0119D3E9E11D574F124, xmp.iid:9E00DBAB5EFBE0119D3E9E11D574F124, xmp.iid:9F00DBAB5EFBE0119D3E9E11D574F124, xmp.iid:A000DBAB5EFBE0119D3E9E11D574F124, xmp.iid:F7858BAAAB00E11185A4A0A971CC3E44, xmp.iid:F8858BAAAB00E11185A4A0A971CC3E44, xmp.iid:F9858BAAAB00E11185A4A0A971CC3E44, xmp.iid:FA858BAAAB00E11185A4A0A971CC3E44, xmp.iid:FB858BAAAB00E11185A4A0A971CC3E44, xmp.iid:FC858BAAAB00E11185A4A0A971CC3E44, xmp.iid:FD858BAAAB00E11185A4A0A971CC3E44, xmp.iid:FE858BAAAB00E11185A4A0A971CC3E44, xmp.iid:FF858BAAAB00E11185A4A0A971CC3E44, xmp.iid:00868BAAAB00E11185A4A0A971CC3E44, xmp.iid:AAD6FB5FC400E11185A4A0A971CC3E44, xmp.iid:ABD6FB5FC400E11185A4A0A971CC3E44, xmp.iid:ACD6FB5FC400E11185A4A0A971CC3E44, xmp.iid:ADD6FB5FC400E11185A4A0A971CC3E44, xmp.iid:AED6FB5FC400E11185A4A0A971CC3E44, xmp.iid:AFD6FB5FC400E11185A4A0A971CC3E44, xmp.iid:B0D6FB5FC400E11185A4A0A971CC3E44, xmp.iid:B1D6FB5FC400E11185A4A0A971CC3E44, xmp.iid:B2D6FB5FC400E11185A4A0A971CC3E44, xmp.iid:B3D6FB5FC400E11185A4A0A971CC3E44, xmp.iid:B4D6FB5FC400E11185A4A0A971CC3E44, xmp.iid:1CDEFB44CE00E11185A4A0A971CC3E44, xmp.iid:1DDEFB44CE00E11185A4A0A971CC3E44, xmp.iid:1EDEFB44CE00E11185A4A0A971CC3E44, xmp.iid:1FDEFB44CE00E11185A4A0A971CC3E44, xmp.iid:20DEFB44CE00E11185A4A0A971CC3E44, xmp.iid:21DEFB44CE00E11185A4A0A971CC3E44, xmp.iid:22DEFB44CE00E11185A4A0A971CC3E44, xmp.iid:23DEFB44CE00E11185A4A0A971CC3E44, xmp.iid:24DEFB44CE00E11185A4A0A971CC3E44, xmp.iid:B649F01D2E06E111A6D0A93CA58DE1CF, xmp.iid:DFC6833E3F06E111BD278E562015F740, xmp.iid:3214EDE44606E111BD278E562015F740, xmp.iid:0449C8704E06E111BD278E562015F740, xmp.iid:0549C8704E06E111BD278E562015F740, xmp.iid:0649C8704E06E111BD278E562015F740, xmp.iid:0749C8704E06E111BD278E562015F740, xmp.iid:4681CB1CF70AE111B8F9951A7D215614, xmp.iid:4781CB1CF70AE111B8F9951A7D215614, xmp.iid:4881CB1CF70AE111B8F9951A7D215614, xmp.iid:4981CB1CF70AE111B8F9951A7D215614, xmp.iid:4A81CB1CF70AE111B8F9951A7D215614, xmp.iid:4B81CB1CF70AE111B8F9951A7D215614, xmp.iid:4C81CB1CF70AE111B8F9951A7D215614, xmp.iid:4D81CB1CF70AE111B8F9951A7D215614, xmp.iid:4E81CB1CF70AE111B8F9951A7D215614, xmp.iid:E4F3BECF090BE111B8F9951A7D215614, xmp.iid:E5F3BECF090BE111B8F9951A7D215614, xmp.iid:E6F3BECF090BE111B8F9951A7D215614, xmp.iid:E7F3BECF090BE111B8F9951A7D215614, xmp.iid:E8F3BECF090BE111B8F9951A7D215614, xmp.iid:E9F3BECF090BE111B8F9951A7D215614, xmp.iid:8C1FF5C3A210E111B4E3BC702991A02C, xmp.iid:8D1FF5C3A210E111B4E3BC702991A02C, xmp.iid:13FBB87DAC10E111B4E3BC702991A02C, xmp.iid:14FBB87DAC10E111B4E3BC702991A02C, xmp.iid:15FBB87DAC10E111B4E3BC702991A02C, xmp.iid:16FBB87DAC10E111B4E3BC702991A02C, xmp.iid:17FBB87DAC10E111B4E3BC702991A02C, xmp.iid:18FBB87DAC10E111B4E3BC702991A02C, xmp.iid:19FBB87DAC10E111B4E3BC702991A02C, xmp.iid:1AFBB87DAC10E111B4E3BC702991A02C, xmp.iid:F90268693B11E111A65BC79D838474EA, xmp.iid:FA0268693B11E111A65BC79D838474EA, xmp.iid:FB0268693B11E111A65BC79D838474EA, xmp.iid:FC0268693B11E111A65BC79D838474EA, xmp.iid:FD0268693B11E111A65BC79D838474EA, xmp.iid:FE0268693B11E111A65BC79D838474EA, xmp.iid:FF0268693B11E111A65BC79D838474EA, xmp.iid:000368693B11E111A65BC79D838474EA, xmp.iid:010368693B11E111A65BC79D838474EA, xmp.iid:020368693B11E111A65BC79D838474EA, xmp.iid:97670C7D4E11E111A65BC79D838474EA, xmp.iid:98670C7D4E11E111A65BC79D838474EA, xmp.iid:99670C7D4E11E111A65BC79D838474EA, xmp.iid:9A670C7D4E11E111A65BC79D838474EA, xmp.iid:9B670C7D4E11E111A65BC79D838474EA, xmp.iid:9C670C7D4E11E111A65BC79D838474EA, xmp.iid:9D670C7D4E11E111A65BC79D838474EA, xmp.iid:9E670C7D4E11E111A65BC79D838474EA, xmp.iid:9F670C7D4E11E111A65BC79D838474EA, xmp.iid:A0670C7D4E11E111A65BC79D838474EA, xmp.iid:A1670C7D4E11E111A65BC79D838474EA, xmp.iid:78D0AC196A11E111A65BC79D838474EA, xmp.iid:79D0AC196A11E111A65BC79D838474EA, xmp.iid:7AD0AC196A11E111A65BC79D838474EA, xmp.iid:7BD0AC196A11E111A65BC79D838474EA, xmp.iid:7CD0AC196A11E111A65BC79D838474EA, xmp.iid:7DD0AC196A11E111A65BC79D838474EA, xmp.iid:7ED0AC196A11E111A65BC79D838474EA, xmp.iid:7FD0AC196A11E111A65BC79D838474EA, xmp.iid:80D0AC196A11E111A65BC79D838474EA, xmp.iid:81D0AC196A11E111A65BC79D838474EA, xmp.iid:82D0AC196A11E111A65BC79D838474EA, xmp.iid:B815BA057C11E111A65BC79D838474EA, xmp.iid:31B415B0FE11E1118EA0BBCA1BB967E5, xmp.iid:32B415B0FE11E1118EA0BBCA1BB967E5, xmp.iid:33B415B0FE11E1118EA0BBCA1BB967E5, xmp.iid:34B415B0FE11E1118EA0BBCA1BB967E5, xmp.iid:35B415B0FE11E1118EA0BBCA1BB967E5, xmp.iid:36B415B0FE11E1118EA0BBCA1BB967E5, xmp.iid:37B415B0FE11E1118EA0BBCA1BB967E5, xmp.iid:38B415B0FE11E1118EA0BBCA1BB967E5, xmp.iid:39B415B0FE11E1118EA0BBCA1BB967E5, xmp.iid:3AB415B0FE11E1118EA0BBCA1BB967E5, xmp.iid:552880321A12E1118EA0BBCA1BB967E5, xmp.iid:562880321A12E1118EA0BBCA1BB967E5, xmp.iid:572880321A12E1118EA0BBCA1BB967E5, xmp.iid:582880321A12E1118EA0BBCA1BB967E5, xmp.iid:592880321A12E1118EA0BBCA1BB967E5, xmp.iid:5A2880321A12E1118EA0BBCA1BB967E5, xmp.iid:5B2880321A12E1118EA0BBCA1BB967E5, xmp.iid:5C2880321A12E1118EA0BBCA1BB967E5, xmp.iid:5D2880321A12E1118EA0BBCA1BB967E5, xmp.iid:5E2880321A12E1118EA0BBCA1BB967E5, xmp.iid:5F2880321A12E1118EA0BBCA1BB967E5, xmp.iid:089F34FC1E12E1118EA0BBCA1BB967E5, xmp.iid:099F34FC1E12E1118EA0BBCA1BB967E5, xmp.iid:0A9F34FC1E12E1118EA0BBCA1BB967E5, xmp.iid:0B9F34FC1E12E1118EA0BBCA1BB967E5, xmp.iid:0C9F34FC1E12E1118EA0BBCA1BB967E5, xmp.iid:0D9F34FC1E12E1118EA0BBCA1BB967E5, xmp.iid:0E9F34FC1E12E1118EA0BBCA1BB967E5, xmp.iid:0F9F34FC1E12E1118EA0BBCA1BB967E5, xmp.iid:109F34FC1E12E1118EA0BBCA1BB967E5, xmp.iid:119F34FC1E12E1118EA0BBCA1BB967E5, xmp.iid:129F34FC1E12E1118EA0BBCA1BB967E5, xmp.iid:219409A32C12E1118EA0BBCA1BB967E5, xmp.iid:229409A32C12E1118EA0BBCA1BB967E5, xmp.iid:239409A32C12E1118EA0BBCA1BB967E5, xmp.iid:249409A32C12E1118EA0BBCA1BB967E5, xmp.iid:259409A32C12E1118EA0BBCA1BB967E5, xmp.iid:269409A32C12E1118EA0BBCA1BB967E5, xmp.iid:279409A32C12E1118EA0BBCA1BB967E5, xmp.iid:289409A32C12E1118EA0BBCA1BB967E5, xmp.iid:299409A32C12E1118EA0BBCA1BB967E5, xmp.iid:2A9409A32C12E1118EA0BBCA1BB967E5, xmp.iid:2B9409A32C12E1118EA0BBCA1BB967E5, xmp.iid:816C85033E12E1118EA0BBCA1BB967E5, xmp.iid:826C85033E12E1118EA0BBCA1BB967E5, xmp.iid:836C85033E12E1118EA0BBCA1BB967E5, xmp.iid:846C85033E12E1118EA0BBCA1BB967E5, xmp.iid:856C85033E12E1118EA0BBCA1BB967E5, xmp.iid:866C85033E12E1118EA0BBCA1BB967E5, xmp.iid:876C85033E12E1118EA0BBCA1BB967E5, xmp.iid:F2EEC06A6314E11191468FE6CE8E7660, xmp.iid:F3EEC06A6314E11191468FE6CE8E7660, xmp.iid:F4EEC06A6314E11191468FE6CE8E7660, xmp.iid:F5EEC06A6314E11191468FE6CE8E7660, xmp.iid:F6EEC06A6314E11191468FE6CE8E7660, xmp.iid:F7EEC06A6314E11191468FE6CE8E7660, xmp.iid:F8EEC06A6314E11191468FE6CE8E7660, xmp.iid:F9EEC06A6314E11191468FE6CE8E7660, xmp.iid:A283CBAA7314E11191468FE6CE8E7660, xmp.iid:A383CBAA7314E11191468FE6CE8E7660, xmp.iid:A483CBAA7314E11191468FE6CE8E7660, xmp.iid:A583CBAA7314E11191468FE6CE8E7660, xmp.iid:A683CBAA7314E11191468FE6CE8E7660, xmp.iid:A783CBAA7314E11191468FE6CE8E7660, xmp.iid:A883CBAA7314E11191468FE6CE8E7660, xmp.iid:A983CBAA7314E11191468FE6CE8E7660, xmp.iid:AA83CBAA7314E11191468FE6CE8E7660, xmp.iid:FF5BF8A8A014E11191468FE6CE8E7660, xmp.iid:005CF8A8A014E11191468FE6CE8E7660, xmp.iid:AB9F9495A214E111B6D3853D5884AE44, xmp.iid:6D0662C22215E11199DAAAA4F01921FA, xmp.iid:6E0662C22215E11199DAAAA4F01921FA, xmp.iid:6F0662C22215E11199DAAAA4F01921FA, xmp.iid:700662C22215E11199DAAAA4F01921FA, xmp.iid:710662C22215E11199DAAAA4F01921FA, xmp.iid:720662C22215E11199DAAAA4F01921FA, xmp.iid:730662C22215E11199DAAAA4F01921FA, xmp.iid:740662C22215E11199DAAAA4F01921FA, xmp.iid:750662C22215E11199DAAAA4F01921FA, xmp.iid:F3C8D1674215E11199DAAAA4F01921FA, xmp.iid:F4C8D1674215E11199DAAAA4F01921FA, xmp.iid:F5C8D1674215E11199DAAAA4F01921FA, xmp.iid:F6C8D1674215E11199DAAAA4F01921FA, xmp.iid:F7C8D1674215E11199DAAAA4F01921FA, xmp.iid:F8C8D1674215E11199DAAAA4F01921FA, xmp.iid:F9C8D1674215E11199DAAAA4F01921FA, xmp.iid:FAC8D1674215E11199DAAAA4F01921FA, xmp.iid:BE3534D35A15E11199DAAAA4F01921FA, xmp.iid:BF3534D35A15E11199DAAAA4F01921FA, xmp.iid:C03534D35A15E11199DAAAA4F01921FA, xmp.iid:C13534D35A15E11199DAAAA4F01921FA, xmp.iid:C23534D35A15E11199DAAAA4F01921FA, xmp.iid:C33534D35A15E11199DAAAA4F01921FA, xmp.iid:C43534D35A15E11199DAAAA4F01921FA, xmp.iid:C53534D35A15E11199DAAAA4F01921FA, xmp.iid:C63534D35A15E11199DAAAA4F01921FA, xmp.iid:C73534D35A15E11199DAAAA4F01921FA, xmp.iid:C83534D35A15E11199DAAAA4F01921FA, xmp.iid:8C7AE5976515E11199DAAAA4F01921FA, xmp.iid:8D7AE5976515E11199DAAAA4F01921FA, xmp.iid:19C23B56F415E111B0F3E2B9A913FD75, xmp.iid:43EBB6502116E11189BA99F15EA597BF, xmp.iid:A0B8A504DF19E1119B8BB11B7328E870, xmp.iid:A1B8A504DF19E1119B8BB11B7328E870, xmp.iid:A2B8A504DF19E1119B8BB11B7328E870, xmp.iid:A4B8A504DF19E1119B8BB11B7328E870, xmp.iid:A5B8A504DF19E1119B8BB11B7328E870, xmp.iid:A6B8A504DF19E1119B8BB11B7328E870, xmp.iid:A7B8A504DF19E1119B8BB11B7328E870, xmp.iid:A8B8A504DF19E1119B8BB11B7328E870, xmp.iid:A9B8A504DF19E1119B8BB11B7328E870, xmp.iid:D9719E8FF119E1119B8BB11B7328E870, xmp.iid:DA719E8FF119E1119B8BB11B7328E870, xmp.iid:DB719E8FF119E1119B8BB11B7328E870, xmp.iid:DC719E8FF119E1119B8BB11B7328E870, xmp.iid:DD719E8FF119E1119B8BB11B7328E870, xmp.iid:1F45FE87BC1AE111AC4BB3B01222290A, xmp.iid:2045FE87BC1AE111AC4BB3B01222290A, xmp.iid:2145FE87BC1AE111AC4BB3B01222290A, xmp.iid:2245FE87BC1AE111AC4BB3B01222290A, xmp.iid:2345FE87BC1AE111AC4BB3B01222290A, xmp.iid:2445FE87BC1AE111AC4BB3B01222290A, xmp.iid:2545FE87BC1AE111AC4BB3B01222290A, xmp.iid:2645FE87BC1AE111AC4BB3B01222290A, xmp.iid:2745FE87BC1AE111AC4BB3B01222290A, xmp.iid:2845FE87BC1AE111AC4BB3B01222290A, xmp.iid:A61EE155C41AE111AC4BB3B01222290A, xmp.iid:A71EE155C41AE111AC4BB3B01222290A, xmp.iid:A81EE155C41AE111AC4BB3B01222290A, xmp.iid:A91EE155C41AE111AC4BB3B01222290A, xmp.iid:AA1EE155C41AE111AC4BB3B01222290A, xmp.iid:AB1EE155C41AE111AC4BB3B01222290A, xmp.iid:FA759E54D31AE111AC4BB3B01222290A, xmp.iid:FB759E54D31AE111AC4BB3B01222290A, xmp.iid:FC759E54D31AE111AC4BB3B01222290A, xmp.iid:FD759E54D31AE111AC4BB3B01222290A, xmp.iid:291DA95EEB1AE111AC4BB3B01222290A, xmp.iid:2A1DA95EEB1AE111AC4BB3B01222290A, xmp.iid:2B1DA95EEB1AE111AC4BB3B01222290A, xmp.iid:2C1DA95EEB1AE111AC4BB3B01222290A, xmp.iid:2D1DA95EEB1AE111AC4BB3B01222290A, xmp.iid:2E1DA95EEB1AE111AC4BB3B01222290A, xmp.iid:2F1DA95EEB1AE111AC4BB3B01222290A, xmp.iid:301DA95EEB1AE111AC4BB3B01222290A, xmp.iid:311DA95EEB1AE111AC4BB3B01222290A, xmp.iid:321DA95EEB1AE111AC4BB3B01222290A, xmp.iid:331DA95EEB1AE111AC4BB3B01222290A, xmp.iid:4C5D03A9701BE111B2FA98E771FA994F, xmp.iid:4D5D03A9701BE111B2FA98E771FA994F, xmp.iid:4E5D03A9701BE111B2FA98E771FA994F, xmp.iid:4F5D03A9701BE111B2FA98E771FA994F, xmp.iid:505D03A9701BE111B2FA98E771FA994F, xmp.iid:515D03A9701BE111B2FA98E771FA994F, xmp.iid:525D03A9701BE111B2FA98E771FA994F, xmp.iid:535D03A9701BE111B2FA98E771FA994F, xmp.iid:545D03A9701BE111B2FA98E771FA994F, xmp.iid:28C2B16E7C1BE111B2FA98E771FA994F, xmp.iid:8DE83859821BE111B2FA98E771FA994F, xmp.iid:8EE83859821BE111B2FA98E771FA994F, xmp.iid:8FE83859821BE111B2FA98E771FA994F, xmp.iid:E1081ED2071DE111849DD8299B9890CC, xmp.iid:E2081ED2071DE111849DD8299B9890CC, xmp.iid:E5081ED2071DE111849DD8299B9890CC, xmp.iid:BB322B27931FE1118CEFABCF42D1E26E, xmp.iid:BC322B27931FE1118CEFABCF42D1E26E, xmp.iid:B6A09A033D20E111A3EDF2138113BE79, xmp.iid:B7A09A033D20E111A3EDF2138113BE79, xmp.iid:DF03A78FFC20E11187FCE27696FC5644, xmp.iid:DD625F59BD22E1118148BAAD2882976E, xmp.iid:5DE8BE7F9747E1119E35B8CFF438217B, xmp.iid:5EE8BE7F9747E1119E35B8CFF438217B, xmp.iid:5FE8BE7F9747E1119E35B8CFF438217B, xmp.iid:60E8BE7F9747E1119E35B8CFF438217B, xmp.iid:61E8BE7F9747E1119E35B8CFF438217B, xmp.iid:6F2396D43848E11199B3E3FC06B1A328, xmp.iid:702396D43848E11199B3E3FC06B1A328, xmp.iid:712396D43848E11199B3E3FC06B1A328, xmp.iid:722396D43848E11199B3E3FC06B1A328, xmp.iid:732396D43848E11199B3E3FC06B1A328, xmp.iid:742396D43848E11199B3E3FC06B1A328, xmp.iid:752396D43848E11199B3E3FC06B1A328, xmp.iid:762396D43848E11199B3E3FC06B1A328, xmp.iid:772396D43848E11199B3E3FC06B1A328, xmp.iid:782396D43848E11199B3E3FC06B1A328, xmp.iid:B5D90A476E48E11199B3E3FC06B1A328, xmp.iid:B6D90A476E48E11199B3E3FC06B1A328, xmp.iid:B7D90A476E48E11199B3E3FC06B1A328, xmp.iid:B8D90A476E48E11199B3E3FC06B1A328, xmp.iid:73943FD2FF48E111828AC9BD842A3126, xmp.iid:5C29705D0249E111863BD4B84E149646, xmp.iid:09FAA30F0749E111ACB7B1F15D0B55E1, xmp.iid:0AFAA30F0749E111ACB7B1F15D0B55E1, xmp.iid:0BFAA30F0749E111ACB7B1F15D0B55E1, xmp.iid:0CFAA30F0749E111ACB7B1F15D0B55E1, xmp.iid:0DFAA30F0749E111ACB7B1F15D0B55E1, xmp.iid:0EFAA30F0749E111ACB7B1F15D0B55E1, xmp.iid:0FFAA30F0749E111ACB7B1F15D0B55E1, xmp.iid:10FAA30F0749E111ACB7B1F15D0B55E1, xmp.iid:11FAA30F0749E111ACB7B1F15D0B55E1, xmp.iid:12FAA30F0749E111ACB7B1F15D0B55E1, xmp.iid:574AEC633149E111ACB7B1F15D0B55E1, xmp.iid:584AEC633149E111ACB7B1F15D0B55E1, xmp.iid:594AEC633149E111ACB7B1F15D0B55E1, xmp.iid:E9F1266F254CE111BCF68DDD9EF5717B, xmp.iid:EAF1266F254CE111BCF68DDD9EF5717B, xmp.iid:F0F1266F254CE111BCF68DDD9EF5717B, xmp.iid:F1F1266F254CE111BCF68DDD9EF5717B, xmp.iid:ABCC9B527352E1118DB6ECE688123013, xmp.iid:ACCC9B527352E1118DB6ECE688123013, xmp.iid:ADCC9B527352E1118DB6ECE688123013, xmp.iid:AFCC9B527352E1118DB6ECE688123013, xmp.iid:B0CC9B527352E1118DB6ECE688123013, xmp.iid:B1CC9B527352E1118DB6ECE688123013, xmp.iid:FC9DAB898652E1118DB6ECE688123013, xmp.iid:FE9DAB898652E1118DB6ECE688123013, xmp.iid:87C2F5198C52E1118DB6ECE688123013, xmp.iid:8AC2F5198C52E1118DB6ECE688123013, xmp.iid:8CC2F5198C52E1118DB6ECE688123013, xmp.iid:8EC2F5198C52E1118DB6ECE688123013, xmp.iid:8FC2F5198C52E1118DB6ECE688123013, xmp.iid:90C2F5198C52E1118DB6ECE688123013, xmp.iid:70C24682A452E1118DB6ECE688123013, xmp.iid:72C24682A452E1118DB6ECE688123013, xmp.iid:73C24682A452E1118DB6ECE688123013, xmp.iid:75C24682A452E1118DB6ECE688123013, xmp.iid:76C24682A452E1118DB6ECE688123013, xmp.iid:77C24682A452E1118DB6ECE688123013, xmp.iid:2AC0DAEFB452E1118DB6ECE688123013, xmp.iid:2BC0DAEFB452E1118DB6ECE688123013, xmp.iid:2CC0DAEFB452E1118DB6ECE688123013, xmp.iid:2DC0DAEFB452E1118DB6ECE688123013, xmp.iid:4739FA94B952E1118DB6ECE688123013, xmp.iid:4839FA94B952E1118DB6ECE688123013, xmp.iid:6D013EE58256E111BE59AFF96ACB12C8, xmp.iid:6E013EE58256E111BE59AFF96ACB12C8, xmp.iid:6F013EE58256E111BE59AFF96ACB12C8, xmp.iid:70013EE58256E111BE59AFF96ACB12C8, xmp.iid:75013EE58256E111BE59AFF96ACB12C8, xmp.iid:77013EE58256E111BE59AFF96ACB12C8, xmp.iid:5D4593178556E111BE59AFF96ACB12C8, xmp.iid:614593178556E111BE59AFF96ACB12C8, xmp.iid:624593178556E111BE59AFF96ACB12C8, xmp.iid:664593178556E111BE59AFF96ACB12C8, xmp.iid:674593178556E111BE59AFF96ACB12C8, xmp.iid:0FCDBDD49056E111BE59AFF96ACB12C8, xmp.iid:12CDBDD49056E111BE59AFF96ACB12C8, xmp.iid:15CDBDD49056E111BE59AFF96ACB12C8, xmp.iid:16CDBDD49056E111BE59AFF96ACB12C8, xmp.iid:17CDBDD49056E111BE59AFF96ACB12C8, xmp.iid:E377CEBF9C56E111BE59AFF96ACB12C8, xmp.iid:E577CEBF9C56E111BE59AFF96ACB12C8, xmp.iid:E677CEBF9C56E111BE59AFF96ACB12C8, xmp.iid:E877CEBF9C56E111BE59AFF96ACB12C8, xmp.iid:0934DE52A456E111BE59AFF96ACB12C8, xmp.iid:9DBC43F5462068119457C758AD9D906E, xmp.iid:9EBC43F5462068119457C758AD9D906E, xmp.iid:1A77FF6A542068119457C758AD9D906E, xmp.iid:3FA7A3640D206811A961FB7EB2836ADF, xmp.iid:40A7A3640D206811A961FB7EB2836ADF, xmp.iid:41A7A3640D206811A961FB7EB2836ADF, xmp.iid:3EBDDC3C13206811A961FB7EB2836ADF, xmp.iid:3FBDDC3C13206811A961FB7EB2836ADF, xmp.iid:42BDDC3C13206811A961FB7EB2836ADF, xmp.iid:43BDDC3C13206811A961FB7EB2836ADF, xmp.iid:44BDDC3C13206811A961FB7EB2836ADF, xmp.iid:45BDDC3C13206811A961FB7EB2836ADF, xmp.iid:10DDAD5919206811A961FB7EB2836ADF, xmp.iid:13DDAD5919206811A961FB7EB2836ADF, xmp.iid:43C5E4687558E111A8579FFE82C7F4A6, xmp.iid:44C5E4687558E111A8579FFE82C7F4A6, xmp.iid:45C5E4687558E111A8579FFE82C7F4A6, xmp.iid:7387EC8B985BE111ACF8B0959A3B49C7, xmp.iid:7487EC8B985BE111ACF8B0959A3B49C7, xmp.iid:7587EC8B985BE111ACF8B0959A3B49C7, xmp.iid:7687EC8B985BE111ACF8B0959A3B49C7, xmp.iid:229076008A62E11193C5896F40CFA371, xmp.iid:239076008A62E11193C5896F40CFA371, xmp.iid:249076008A62E11193C5896F40CFA371, xmp.iid:259076008A62E11193C5896F40CFA371, xmp.iid:269076008A62E11193C5896F40CFA371, xmp.iid:279076008A62E11193C5896F40CFA371, xmp.iid:289076008A62E11193C5896F40CFA371, xmp.iid:C1B512759862E11193C5896F40CFA371, xmp.iid:10E0B8A14B6FE1119638FB1A7D97C390, xmp.iid:11E0B8A14B6FE1119638FB1A7D97C390, xmp.iid:198BA4300473E111ABF1E9FACB9BADBA, xmp.iid:1A8BA4300473E111ABF1E9FACB9BADBA, xmp.iid:1B8BA4300473E111ABF1E9FACB9BADBA, xmp.iid:B2F51D92437AE111AE2BF42C6F28BCB4, xmp.iid:B3F51D92437AE111AE2BF42C6F28BCB4, xmp.iid:026DEBE87687E11196958C7295B018A3, xmp.iid:036DEBE87687E11196958C7295B018A3, xmp.iid:D3A6D475988AE1118E8D90FAC970DFFC, xmp.iid:690AEE0C9E8AE1118E8D90FAC970DFFC, xmp.iid:6C0AEE0C9E8AE1118E8D90FAC970DFFC, xmp.iid:6D0AEE0C9E8AE1118E8D90FAC970DFFC, xmp.iid:43EEA9900C8DE1119A52BC6F8B940EEB, xmp.iid:44EEA9900C8DE1119A52BC6F8B940EEB, xmp.iid:DA947036448FE1119E32FB283C9E80A1, xmp.iid:DB947036448FE1119E32FB283C9E80A1, xmp.iid:0FA58E0C779AE111AE299FD6B2AC11EE, xmp.iid:10A58E0C779AE111AE299FD6B2AC11EE, xmp.iid:11A58E0C779AE111AE299FD6B2AC11EE, xmp.iid:12A58E0C779AE111AE299FD6B2AC11EE, xmp.iid:15A58E0C779AE111AE299FD6B2AC11EE, xmp.iid:16A58E0C779AE111AE299FD6B2AC11EE, xmp.iid:17A58E0C779AE111AE299FD6B2AC11EE, xmp.iid:AA4AAF398D9DE11182E7CF4226BAFFB5, xmp.iid:AB4AAF398D9DE11182E7CF4226BAFFB5, xmp.iid:AC4AAF398D9DE11182E7CF4226BAFFB5, xmp.iid:AF4AAF398D9DE11182E7CF4226BAFFB5, xmp.iid:B04AAF398D9DE11182E7CF4226BAFFB5, xmp.iid:9EA7EE1050A5E1119A02E5AB09333C7E, xmp.iid:A0A7EE1050A5E1119A02E5AB09333C7E, xmp.iid:A1A7EE1050A5E1119A02E5AB09333C7E, xmp.iid:AC46A9A6D7C4E11195A1ACA66BD9A59B, xmp.iid:AEBA3F00D9C4E111B4998355A093CF86, xmp.iid:AFBA3F00D9C4E111B4998355A093CF86, xmp.iid:B3BA3F00D9C4E111B4998355A093CF86
History When                    : 2010:05:12 16:00:16-07:00, 2010:05:12 16:00:17-07:00, 2010:05:12 16:06:32-07:00, 2010:05:12 16:10:47-07:00, 2010:05:12 16:10:48-07:00, 2010:05:12 16:22:36-07:00, 2010:06:01 13:41:52-07:00, 2010:06:01 14:52:48-07:00, 2010:06:01 14:53:21-07:00, 2010:06:01 14:55:48-07:00, 2010:06:01 15:00:11-07:00, 2010:06:01 15:12:40-07:00, 2010:06:01 15:22:02-07:00, 2010:06:01 15:45:43-07:00, 2010:06:01 15:47:41-07:00, 2010:06:01 16:25:47-07:00, 2010:06:01 16:28:06-07:00, 2010:06:09 13:46:21-07:00, 2010:06:09 13:47:53-07:00, 2010:06:09 13:50:42-07:00, 2010:06:09 13:54:02-07:00, 2010:06:09 13:54:03-07:00, 2010:10:26 16:23:42-07:00, 2010:10:26 16:50:46-07:00, 2010:10:26 16:51:29-07:00, 2010:10:26 16:54:51-07:00, 2011:07:22 10:37:04-07:00, 2011:07:22 10:37:06-07:00, 2011:07:22 11:51:25-07:00, 2011:07:22 15:11:04-07:00, 2011:07:25 16:44:57-07:00, 2011:07:26 18:05:49-07:00, 2011:08:04 18:15:51-07:00, 2011:08:05 13:18:02-07:00, 2011:08:08 18:21:52-07:00, 2011:08:09 17:58:13-07:00, 2011:08:10 12:01:16-07:00, 2011:08:10 13:56:57-07:00, 2011:08:10 17:52:21-07:00, 2011:08:11 10:28:52-07:00, 2011:08:11 11:25:40-07:00, 2011:08:11 11:31:49-07:00, 2011:08:11 14:30:07-07:00, 2011:08:11 14:36:40-07:00, 2011:08:11 14:59:22-07:00, 2011:08:11 16:53:05-07:00, 2011:08:11 17:02:15-07:00, 2011:08:12 11:11:28-07:00, 2011:08:12 11:18:20-07:00, 2011:08:15 17:59:39-07:00, 2011:08:16 12:44:20-07:00, 2011:08:16 14:07:48-07:00, 2011:08:16 14:13:13-07:00, 2011:08:19 16:38:15-07:00, 2011:08:22 13:16:53-07:00, 2011:08:22 14:28:04-07:00, 2011:08:22 18:05:33-07:00, 2011:08:23 11:23:25-07:00, 2011:08:23 11:25:12-07:00, 2011:09:13 17:39:16-07:00, 2011:09:13 18:10:47-07:00, 2011:09:14 17:18:32-07:00, 2011:09:15 17:24:14-07:00, 2011:09:15 18:15:48-07:00, 2011:09:15 18:16:39-07:00, 2011:09:16 10:21:51-07:00, 2011:09:16 10:25:59-07:00, 2011:09:16 10:33:56-07:00, 2011:09:16 10:33:57-07:00, 2011:09:16 14:10:24-07:00, 2011:09:16 15:38:34-07:00, 2011:09:16 16:32:32-07:00, 2011:09:16 17:00:31-07:00, 2011:09:16 17:04:01-07:00, 2011:09:16 17:14:27-07:00, 2011:09:16 17:27:04-07:00, 2011:09:19 14:12:25-07:00, 2011:09:19 14:15:35-07:00, 2011:09:19 14:28:35-07:00, 2011:09:19 14:46:27-07:00, 2011:09:21 10:56:06-07:00, 2011:09:21 11:31:56-07:00, 2011:09:21 11:40:32-07:00, 2011:09:21 11:59:20-07:00, 2011:09:21 12:41:32-07:00, 2011:09:21 12:54:46-07:00, 2011:09:21 12:57:14-07:00, 2011:09:21 12:58:40-07:00, 2011:09:21 13:07:14-07:00, 2011:09:21 13:07:15-07:00, 2011:09:21 15:37:25-07:00, 2011:09:21 16:53:34-07:00, 2011:09:21 18:09:35-07:00, 2011:09:21 18:15:45-07:00, 2011:09:21 18:15:46-07:00, 2011:09:21 18:28:06-07:00, 2011:09:22 15:24:26+08:00, 2011:09:22 15:25:50+08:00, 2011:09:23 11:24:26-07:00, 2011:09:23 11:24:26-07:00, 2011:09:23 11:31-07:00, 2011:09:23 11:33:16-07:00, 2011:09:23 11:35:08-07:00, 2011:09:23 11:40:15-07:00, 2011:10:12 10:49:17-07:00, 2011:10:12 10:54:38-07:00, 2011:10:12 10:58:54-07:00, 2011:10:12 11:00:59-07:00, 2011:10:13 15:03:40-07:00, 2011:10:13 16:09:33-07:00, 2011:10:13 18:00:02-07:00, 2011:10:20 13:52:47-07:00, 2011:10:20 13:58:40-07:00, 2011:10:20 14:01:24-07:00, 2011:10:20 14:06:32-07:00, 2011:10:20 14:07:20-07:00, 2011:10:20 14:08:39-07:00, 2011:10:20 14:13-07:00, 2011:10:20 14:17:31-07:00, 2011:10:27 07:55:09-07:00, 2011:10:27 08:04:06-07:00, 2011:10:27 08:04:07-07:00, 2011:10:27 08:10:31-07:00, 2011:10:27 08:26:03-07:00, 2011:10:27 10:10:13-07:00, 2011:10:27 10:12:16-07:00, 2011:10:27 10:12:27-07:00, 2011:10:27 10:34:43-07:00, 2011:10:27 10:48:14-07:00, 2011:10:27 10:52:02-07:00, 2011:10:27 10:53:06-07:00, 2011:10:27 10:54:03-07:00, 2011:10:27 10:56:59-07:00, 2011:10:27 11:26-07:00, 2011:10:27 11:37:50-07:00, 2011:10:27 11:44:48-07:00, 2011:10:27 11:50:57-07:00, 2011:10:27 11:52:25-07:00, 2011:10:27 11:57:29-07:00, 2011:10:27 12:01:58-07:00, 2011:10:27 12:02:51-07:00, 2011:10:27 12:04:03-07:00, 2011:10:27 12:05:01-07:00, 2011:10:27 12:15:46-07:00, 2011:10:27 12:17:18-07:00, 2011:10:27 12:18:56-07:00, 2011:10:27 13:58:30-07:00, 2011:10:27 13:59:50-07:00, 2011:10:27 16:32:19-07:00, 2011:11:03 08:18:58-07:00, 2011:11:03 10:14:09-07:00, 2011:11:03 11:19:15-07:00, 2011:11:03 14:16:55-07:00, 2011:11:03 14:25:50-07:00, 2011:11:03 14:28:11-07:00, 2011:11:03 14:32:50-07:00, 2011:11:09 09:37:08-08:00, 2011:11:09 09:40:04-08:00, 2011:11:09 09:49:01-08:00, 2011:11:09 10:07:49-08:00, 2011:11:09 10:14:32-08:00, 2011:11:09 11:05:48-08:00, 2011:11:09 11:09:40-08:00, 2011:11:09 11:21:27-08:00, 2011:11:09 11:31:03-08:00, 2011:11:09 11:34:16-08:00, 2011:11:09 11:44:33-08:00, 2011:11:09 13:19:57-08:00, 2011:11:09 13:23:08-08:00, 2011:11:09 13:30:09-08:00, 2011:11:09 13:51:48-08:00, 2011:11:16 15:19:46-08:00, 2011:11:16 15:38:05-08:00, 2011:11:16 15:41:22-08:00, 2011:11:16 15:43:15-08:00, 2011:11:16 15:48:59-08:00, 2011:11:16 15:50:46-08:00, 2011:11:16 15:52:40-08:00, 2011:11:16 15:52:57-08:00, 2011:11:16 15:55:49-08:00, 2011:11:16 15:58:28-08:00, 2011:11:17 08:44:26-08:00, 2011:11:17 09:09:44-08:00, 2011:11:17 09:10:36-08:00, 2011:11:17 09:22:45-08:00, 2011:11:17 10:09:03-08:00, 2011:11:17 10:35:43-08:00, 2011:11:17 10:41:04-08:00, 2011:11:17 10:47:39-08:00, 2011:11:17 10:49-08:00, 2011:11:17 10:58:02-08:00, 2011:11:17 11:01-08:00, 2011:11:17 11:09:56-08:00, 2011:11:17 11:16:27-08:00, 2011:11:17 11:22:11-08:00, 2011:11:17 11:22:45-08:00, 2011:11:17 11:26:27-08:00, 2011:11:17 11:30:06-08:00, 2011:11:17 11:36:24-08:00, 2011:11:17 11:38:43-08:00, 2011:11:17 13:41:26-08:00, 2011:11:17 13:50:52-08:00, 2011:11:17 14:18:39-08:00, 2011:11:17 14:20:01-08:00, 2011:11:17 14:21:35-08:00, 2011:11:17 14:46:56-08:00, 2011:11:17 14:47:05-08:00, 2011:11:17 14:59:11-08:00, 2011:11:17 15:01:28-08:00, 2011:11:17 15:42:21-08:00, 2011:11:17 16:17:17-08:00, 2011:11:17 16:19:45-08:00, 2011:11:17 16:24:11-08:00, 2011:11:17 16:26:56-08:00, 2011:11:18 08:02:17-08:00, 2011:11:18 08:10:16-08:00, 2011:11:18 09:09:28-08:00, 2011:11:18 09:10:11-08:00, 2011:11:18 09:30:01-08:00, 2011:11:18 09:31:37-08:00, 2011:11:18 10:10:16-08:00, 2011:11:18 10:36:07-08:00, 2011:11:18 10:37:52-08:00, 2011:11:18 10:47:40-08:00, 2011:11:18 11:19:12-08:00, 2011:11:18 11:19:19-08:00, 2011:11:18 11:26:35-08:00, 2011:11:18 11:26:41-08:00, 2011:11:18 11:31:52-08:00, 2011:11:18 11:33:24-08:00, 2011:11:18 11:40:41-08:00, 2011:11:18 11:41:25-08:00, 2011:11:18 11:41:44-08:00, 2011:11:18 11:51:13-08:00, 2011:11:18 11:53:06-08:00, 2011:11:18 11:53:28-08:00, 2011:11:18 12:11:57-08:00, 2011:11:18 12:13:07-08:00, 2011:11:18 12:17:36-08:00, 2011:11:18 12:18:35-08:00, 2011:11:18 12:19:07-08:00, 2011:11:18 12:19:34-08:00, 2011:11:18 13:18:34-08:00, 2011:11:18 13:22:57-08:00, 2011:11:18 13:23:34-08:00, 2011:11:18 13:29:08-08:00, 2011:11:18 13:31:12-08:00, 2011:11:18 13:36:03-08:00, 2011:11:18 14:23:56-08:00, 2011:11:18 14:28:45-08:00, 2011:11:18 14:32:24-08:00, 2011:11:18 14:36:12-08:00, 2011:11:18 14:36:42-08:00, 2011:11:18 15:14:09-08:00, 2011:11:18 15:31:23-08:00, 2011:11:18 15:32:03-08:00, 2011:11:18 15:32:17-08:00, 2011:11:18 15:35:35-08:00, 2011:11:18 15:35:47-08:00, 2011:11:18 15:46:24-08:00, 2011:11:18 15:46:36-08:00, 2011:11:18 15:49:22-08:00, 2011:11:18 15:51-08:00, 2011:11:18 16:11:19-08:00, 2011:11:21 09:08:22-08:00, 2011:11:21 09:08:45-08:00, 2011:11:21 09:28:58-08:00, 2011:11:21 09:31:07-08:00, 2011:11:21 09:54:56-08:00, 2011:11:21 09:57:23-08:00, 2011:11:21 10:41:10-08:00, 2011:11:21 10:49:01-08:00, 2011:11:21 11:22:31-08:00, 2011:11:21 11:24:54-08:00, 2011:11:21 14:24:26-08:00, 2011:11:21 14:46:17-08:00, 2011:11:21 15:24:16-08:00, 2011:11:21 15:29:35-08:00, 2011:11:21 15:31:17-08:00, 2011:11:21 16:06:50-08:00, 2011:11:21 16:24:53-08:00, 2011:11:21 16:26:45-08:00, 2011:11:21 16:29:07-08:00, 2011:11:21 16:40:32-08:00, 2011:11:22 07:58:03-08:00, 2011:11:22 08:21:52-08:00, 2011:11:22 08:27:01-08:00, 2011:11:22 09:05:11-08:00, 2011:11:22 09:38:18-08:00, 2011:11:22 11:22:15-08:00, 2011:11:22 11:34:05-08:00, 2011:11:22 11:35-08:00, 2011:11:22 11:36:52-08:00, 2011:11:22 11:52:48-08:00, 2011:11:22 12:04:24-08:00, 2011:11:22 12:04:46-08:00, 2011:11:22 12:07:14-08:00, 2011:11:22 14:01:27-08:00, 2011:11:22 14:24:50-08:00, 2011:11:22 14:31:20-08:00, 2011:11:22 14:35:10-08:00, 2011:11:22 14:39:23-08:00, 2011:11:22 14:52:57-08:00, 2011:11:22 14:55:21-08:00, 2011:11:22 14:56:55-08:00, 2011:11:22 14:58:28-08:00, 2011:11:22 14:59:45-08:00, 2011:11:22 15:26:47-08:00, 2011:11:22 15:31:35-08:00, 2011:11:22 15:31:35-08:00, 2011:11:22 15:45:39-08:00, 2011:11:22 15:50:46-08:00, 2011:11:22 15:56:28-08:00, 2011:11:22 15:58:50-08:00, 2011:11:23 08:58:16-08:00, 2011:11:23 14:20:14-08:00, 2011:11:28 08:35:44-08:00, 2011:11:28 09:25:52-08:00, 2011:11:28 09:49:46-08:00, 2011:11:28 09:58:36-08:00, 2011:11:28 10:03:48-08:00, 2011:11:28 10:14:57-08:00, 2011:11:28 10:16:35-08:00, 2011:11:28 10:17:55-08:00, 2011:11:28 10:20:06-08:00, 2011:11:28 10:48:28-08:00, 2011:11:28 10:58:42-08:00, 2011:11:28 11:00:09-08:00, 2011:11:28 11:05:26-08:00, 2011:11:28 11:05:47-08:00, 2011:11:29 11:01:23-08:00, 2011:11:29 11:09:23-08:00, 2011:11:29 11:12:06-08:00, 2011:11:29 11:21:50-08:00, 2011:11:29 11:22:47-08:00, 2011:11:29 11:24-08:00, 2011:11:29 11:37:53-08:00, 2011:11:29 11:38:38-08:00, 2011:11:29 11:51:03-08:00, 2011:11:29 11:55:04-08:00, 2011:11:29 11:57:15-08:00, 2011:11:29 11:57:26-08:00, 2011:11:29 11:58:28-08:00, 2011:11:29 12:09:46-08:00, 2011:11:29 12:10:04-08:00, 2011:11:29 12:10:27-08:00, 2011:11:29 15:09:17-08:00, 2011:11:29 15:34:04-08:00, 2011:11:29 15:49:13-08:00, 2011:11:29 16:32:05-08:00, 2011:11:29 16:36:40-08:00, 2011:11:29 16:43:31-08:00, 2011:11:29 16:45:07-08:00, 2011:11:29 16:45:48-08:00, 2011:11:29 16:50:14-08:00, 2011:11:29 16:50:24-08:00, 2011:11:29 16:53:49-08:00, 2011:11:29 16:54:08-08:00, 2011:11:29 16:54:48-08:00, 2011:11:29 16:55:11-08:00, 2011:11:29 17:33:37-08:00, 2011:11:30 08:30:48-08:00, 2011:11:30 08:34:47-08:00, 2011:11:30 08:41:33-08:00, 2011:11:30 08:44:26-08:00, 2011:11:30 08:45:11-08:00, 2011:11:30 08:49:24-08:00, 2011:11:30 09:41:50-08:00, 2011:11:30 09:52:49-08:00, 2011:11:30 09:53:20-08:00, 2011:11:30 10:00:10-08:00, 2011:11:30 10:48:58-08:00, 2011:11:30 10:53-08:00, 2011:11:30 11:26:45-08:00, 2011:12:02 14:17:18-08:00, 2011:12:02 14:25:17-08:00, 2011:12:02 14:39:58-08:00, 2011:12:05 14:47:47-08:00, 2011:12:05 14:51:59-08:00, 2011:12:06 11:50:53-08:00, 2011:12:06 11:56:46-08:00, 2011:12:07 09:58:17-08:00, 2011:12:09 15:27:53-08:00, 2012:01:25 14:57:03-08:00, 2012:01:25 14:57:04-08:00, 2012:01:25 15:10:59-08:00, 2012:01:25 15:21:29-08:00, 2012:01:25 15:52:26-08:00, 2012:01:26 08:14:31-08:00, 2012:01:26 08:37:19-08:00, 2012:01:26 08:57:31-08:00, 2012:01:26 09:08:06-08:00, 2012:01:26 09:27:02-08:00, 2012:01:26 09:31:45-08:00, 2012:01:26 09:55:04-08:00, 2012:01:26 13:28:08-08:00, 2012:01:26 13:40:10-08:00, 2012:01:26 14:36:05-08:00, 2012:01:26 14:37:07-08:00, 2012:01:26 14:49:14-08:00, 2012:01:26 14:57:05-08:00, 2012:01:26 16:00:39-08:00, 2012:01:27 07:58:57-08:00, 2012:01:27 08:17:10-08:00, 2012:01:27 08:50:47-08:00, 2012:01:27 09:37:12-08:00, 2012:01:27 10:14:05-08:00, 2012:01:27 10:19:37-08:00, 2012:01:27 10:28:07-08:00, 2012:01:27 10:30:22-08:00, 2012:01:27 13:08:50-08:00, 2012:01:27 13:13:38-08:00, 2012:01:27 13:42:33-08:00, 2012:01:27 13:51:05-08:00, 2012:01:27 13:53:47-08:00, 2012:01:27 13:56:37-08:00, 2012:01:27 14:05:59-08:00, 2012:01:31 08:05:57-08:00, 2012:01:31 08:06:55-08:00, 2012:01:31 08:25:51-08:00, 2012:01:31 08:25:52-08:00, 2012:02:08 08:47:03-08:00, 2012:02:08 08:47:24-08:00, 2012:02:08 08:52:54-08:00, 2012:02:08 10:41:40-08:00, 2012:02:08 10:50:39-08:00, 2012:02:08 10:55:53-08:00, 2012:02:08 11:17:38-08:00, 2012:02:08 11:18:24-08:00, 2012:02:08 11:35:48-08:00, 2012:02:08 13:16:42-08:00, 2012:02:08 13:19:08-08:00, 2012:02:08 13:29:53-08:00, 2012:02:08 13:46:14-08:00, 2012:02:08 13:57:35-08:00, 2012:02:08 14:30:31-08:00, 2012:02:08 15:10:52-08:00, 2012:02:08 15:17:24-08:00, 2012:02:08 15:19:46-08:00, 2012:02:08 15:25:03-08:00, 2012:02:08 16:04:44-08:00, 2012:02:08 16:55:50-08:00, 2012:02:08 16:56:48-08:00, 2012:02:08 17:00:26-08:00, 2012:02:08 17:00:26-08:00, 2012:02:08 17:06:43-08:00, 2012:02:08 17:06:51-08:00, 2012:02:13 12:39:58-08:00, 2012:02:13 12:39:59-08:00, 2012:02:13 12:40:20-08:00, 2012:02:13 12:40:20-08:00, 2012:02:13 12:50:52-08:00, 2012:02:13 12:53:43-08:00, 2012:02:13 12:55:42-08:00, 2012:02:13 13:04:02-08:00, 2012:02:13 13:09:15-08:00, 2012:02:13 13:58:56-08:00, 2012:02:13 14:18:08-08:00, 2012:02:13 14:24:54-08:00, 2012:02:13 15:16:04-08:00, 2012:02:13 15:31:51-08:00, 2012:02:13 15:38:51-08:00, 2012:02:13 15:45:02-08:00, 2012:02:13 15:45:03-08:00, 2012:02:13 16:20:14-08:00, 2012:02:13 16:21:14-08:00, 2012:02:13 16:29:29-08:00, 2012:02:13 16:43:50-08:00, 2012:02:15 11:20:19-08:00, 2012:02:15 11:20:19-08:00, 2012:02:15 11:33:35-08:00, 2012:02:15 14:40:04-08:00, 2012:02:15 14:41:30-08:00, 2012:02:15 14:47:47-08:00, 2012:02:15 15:13:25-08:00, 2012:02:15 15:17:19-08:00, 2012:02:15 15:36:39-08:00, 2012:02:15 15:42:06-08:00, 2012:02:15 15:47:40-08:00, 2012:02:15 15:47:41-08:00, 2012:02:15 16:36:44-08:00, 2012:02:15 16:48:11-08:00, 2012:02:16 16:08:29+08:00, 2012:02:16 16:08:29+08:00, 2012:02:16 16:11:27+08:00, 2012:02:20 16:14:15+08:00, 2012:02:20 16:15:14+08:00, 2012:02:20 16:15:14+08:00, 2012:02:20 16:16:49+08:00, 2012:02:29 13:34:55+08:00, 2012:02:29 13:34:56+08:00, 2012:02:29 13:36:56+08:00, 2012:02:29 13:38:25+08:00, 2012:02:29 13:42:47+08:00, 2012:02:29 13:43:30+08:00, 2012:02:29 13:43:30+08:00, 2012:02:29 13:44:33+08:00, 2012:03:16 17:37:22+08:00, 2012:03:16 17:42:51+08:00, 2012:03:21 12:43:39+08:00, 2012:03:21 12:43:48+08:00, 2012:03:21 12:46:47+08:00, 2012:03:30 16:37:23+08:00, 2012:03:30 16:38:48+08:00, 2012:04:16 16:00+08:00, 2012:04:16 16:00+08:00, 2012:04:20 12:03:53+08:00, 2012:04:20 12:05:22+08:00, 2012:04:20 12:26:06+08:00, 2012:04:20 12:30:41+08:00, 2012:04:23 14:43:35+08:00, 2012:04:23 14:44:02+08:00, 2012:04:26 12:43:15+08:00, 2012:04:26 12:44:43+08:00, 2012:05:10 16:06:30+08:00, 2012:05:10 16:06:30+08:00, 2012:05:10 16:14:01+08:00, 2012:05:10 16:14:01+08:00, 2012:05:10 16:17+08:00, 2012:05:10 16:20:27+08:00, 2012:05:10 16:49:04+08:00, 2012:05:14 16:32:30+08:00, 2012:05:14 16:35:20+08:00, 2012:05:14 16:36:57+08:00, 2012:05:14 17:00:49+08:00, 2012:05:14 17:04:25+08:00, 2012:05:24 11:38:45+08:00, 2012:05:24 11:50:23+08:00, 2012:05:24 11:51:54+08:00, 2012:07:03 14:23:49+08:00, 2012:07:03 14:33:28+08:00, 2012:07:03 14:36:33+08:00, 2012:07:03 17:22:44+08:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /metadata, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /metadata, /;/metadata, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /metadata, /, /, /, /metadata, /;/metadata, /, /, /metadata, /, /, /metadata, /;/metadata, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 96.00, 150.00, 96.00, 150.00, 150.00, 150.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 150.00, 150.00, 150.00, 150.00, 150.00, 72.00, 150.00, 96.00, 96.00, 150.00, 150.00, 150.00, 150.00, 150.00, 96.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 300.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 300.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00
Manifest Placed Y Resolution    : 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 96.00, 150.00, 96.00, 150.00, 150.00, 150.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 150.00, 150.00, 150.00, 150.00, 150.00, 72.00, 150.00, 96.00, 96.00, 150.00, 150.00, 150.00, 150.00, 150.00, 96.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 300.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 150.00, 300.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : xmp.iid:99032F3B51A5E1119D14FA08563449B5, xmp.iid:845443241073E1119DC3DE77E7DB039F, xmp.iid:A77EAF7E6CA5E1118C1E83BCA5874F1E, xmp.iid:F3D8D22587A4E1118D2CFA0A2BDBB1AC, uuid:a638ed5b-45cc-45c1-9ce5-b720e819a584, uuid:5ca9079d-5a48-4e2c-b71a-45d453d8ccbe, uuid:1f2ab4ad-55a1-45cc-ab97-a6851512565a, uuid:f8a8a0a6-9f6e-46af-95ff-4fb81e299e32, xmp.iid:826321733F20E1118512AD21E3F090BB, xmp.iid:24148B683348E111BEED9667A03C8EC9, xmp.iid:D79D28FE6E56E1119540D2E6EE7FE320, xmp.iid:D89D28FE6E56E1119540D2E6EE7FE320, xmp.iid:D99D28FE6E56E1119540D2E6EE7FE320, xmp.iid:DA9D28FE6E56E1119540D2E6EE7FE320, xmp.iid:4ADFBD329D22E1118FDBE17408FC5C17, xmp.iid:FC7F11740720681188C6D116A0B508FC, xmp.iid:D49D28FE6E56E1119540D2E6EE7FE320, uuid:64c4d82f-1252-4363-a356-4ab38b719d86, xmp.iid:FC7F11740720681188C6D116A0B508FC, uuid:0bdc2ad0-8904-2d41-92f1-ce05ea3cd84d, xmp.iid:6811EC56F0C4E111BF518A01BB4BE047, xmp.iid:7BE786D1729AE111BA42F2B36AC8F6CB, xmp.iid:5F879AF28352E111B913B73FCC047B23, xmp.iid:5F879AF28352E111B913B73FCC047B23, xmp.iid:7DE786D1729AE111BA42F2B36AC8F6CB, xmp.iid:7DE786D1729AE111BA42F2B36AC8F6CB, uuid:6DE96DADC188DC11A014F42E98B33B80, xmp.iid:22148B683348E111BEED9667A03C8EC9, uuid:C4A5075A5F48DD11A967F2D595E78A32, xmp.iid:21FDBACCC24EE111BAEBC5EE369544FA, xmp.iid:485046E3779AE111BA42F2B36AC8F6CB, xmp.iid:7FE786D1729AE111BA42F2B36AC8F6CB, xmp.iid:23148B683348E111BEED9667A03C8EC9, xmp.iid:F6725BE08914E111B0C1B912F7E18E39, xmp.iid:8FBFEF716711E111A9E086DCA5FD0281, xmp.iid:62B1582E759AE111BA42F2B36AC8F6CB, xmp.iid:64B1582E759AE111BA42F2B36AC8F6CB, xmp.iid:66B1582E759AE111BA42F2B36AC8F6CB, xmp.iid:68B1582E759AE111BA42F2B36AC8F6CB, xmp.iid:6AB1582E759AE111BA42F2B36AC8F6CB, xmp.iid:CF9B96C6759AE111BA42F2B36AC8F6CB, xmp.iid:D19B96C6759AE111BA42F2B36AC8F6CB, xmp.iid:D39B96C6759AE111BA42F2B36AC8F6CB, xmp.iid:D59B96C6759AE111BA42F2B36AC8F6CB, xmp.iid:D79B96C6759AE111BA42F2B36AC8F6CB, xmp.iid:D99B96C6759AE111BA42F2B36AC8F6CB, xmp.iid:D99B96C6759AE111BA42F2B36AC8F6CB, xmp.iid:50C5C03C769AE111BA42F2B36AC8F6CB, xmp.iid:A77EAF7E6CA5E1118C1E83BCA5874F1E, xmp.iid:BC782130A39DE111B340812C00EDE98F, xmp.iid:54C5C03C769AE111BA42F2B36AC8F6CB, xmp.iid:56C5C03C769AE111BA42F2B36AC8F6CB, xmp.iid:58C5C03C769AE111BA42F2B36AC8F6CB, xmp.iid:B17971B6769AE111BA42F2B36AC8F6CB, xmp.iid:B37971B6769AE111BA42F2B36AC8F6CB, xmp.iid:B57971B6769AE111BA42F2B36AC8F6CB, xmp.iid:B77971B6769AE111BA42F2B36AC8F6CB, xmp.iid:B97971B6769AE111BA42F2B36AC8F6CB, xmp.iid:BB7971B6769AE111BA42F2B36AC8F6CB, xmp.iid:6A515D2E779AE111BA42F2B36AC8F6CB, xmp.iid:6C515D2E779AE111BA42F2B36AC8F6CB, xmp.iid:6E515D2E779AE111BA42F2B36AC8F6CB, xmp.iid:70515D2E779AE111BA42F2B36AC8F6CB, xmp.iid:72515D2E779AE111BA42F2B36AC8F6CB, xmp.iid:744AF881779AE111BA42F2B36AC8F6CB, xmp.iid:764AF881779AE111BA42F2B36AC8F6CB, xmp.iid:784AF881779AE111BA42F2B36AC8F6CB, xmp.iid:7A4AF881779AE111BA42F2B36AC8F6CB, xmp.iid:7C4AF881779AE111BA42F2B36AC8F6CB, xmp.iid:7E4AF881779AE111BA42F2B36AC8F6CB, xmp.iid:475046E3779AE111BA42F2B36AC8F6CB, xmp.iid:A77EAF7E6CA5E1118C1E83BCA5874F1E, uuid:40674894EDBCDE1185D1D9D309EE1DFE, uuid:43674894EDBCDE1185D1D9D309EE1DFE, uuid:9704D86E7F4FDC11A05FE732C1FAED7F, uuid:555EA4107B4FDC11A05FE732C1FAED7F, uuid:555EA4107B4FDC11A05FE732C1FAED7F, uuid:9704D86E7F4FDC11A05FE732C1FAED7F, uuid:595EA4107B4FDC11A05FE732C1FAED7F, uuid:ed645c8c-4cba-11da-bf84-f59405901279, uuid:31c0b145-4d52-11da-9063-86e0e23ed818, uuid:4e2f0bb9-4cbb-11da-bf84-f59405901279, uuid:ed645c8c-4cba-11da-bf84-f59405901279, uuid:4e2f0bb9-4cbb-11da-bf84-f59405901279, uuid:5baa3ab9-f546-11d9-80f7-b1c380115801
Manifest Reference Document ID  : uuid:554A54FA341411DFB6BFA09E624A1EDB, uuid:FC2C9D0BB636DF11B65DFC809A52A4D0, xmp.did:1BED2A9D4837E111922AD22926DF20AA, uuid:faf5bdd5-ba3d-11da-ad31-d33d75182f1b, xmp.did:F4BDCF73D904E11185F8B60B733BB893, xmp.did:8BE9D0FABB42E1118AF9E9B66FB514C8, xmp.did:B228F1DBC642E1118F63EEC0F6BC23FD, xmp.did:B328F1DBC642E1118F63EEC0F6BC23FD, xmp.did:816321733F20E1118512AD21E3F090BB, xmp.did:24148B683348E111BEED9667A03C8EC9, xmp.did:D79D28FE6E56E1119540D2E6EE7FE320, xmp.did:D89D28FE6E56E1119540D2E6EE7FE320, xmp.did:D99D28FE6E56E1119540D2E6EE7FE320, xmp.did:DA9D28FE6E56E1119540D2E6EE7FE320, xmp.did:48DFBD329D22E1118FDBE17408FC5C17, xmp.did:F97F11740720681188C6D116A0B508FC, xmp.did:0A801174072068118D4A805384C487D8, xmp.did:D9164AE71049E111B005E13C03C1B8D1, xmp.did:F97F11740720681188C6D116A0B508FC, xmp.did:018011740720681197A5CBA72A06B4D1, adobe:docid:photoshop:49f3ef52-fa08-11d9-9634-db5cd49ad058, xmp.did:5B879AF28352E111B913B73FCC047B23, xmp.did:5F879AF28352E111B913B73FCC047B23, xmp.did:5F879AF28352E111B913B73FCC047B23, xmp.did:A35C87CB9F52E111B913B73FCC047B23, xmp.did:A35C87CB9F52E111B913B73FCC047B23, uuid:6CE96DADC188DC11A014F42E98B33B80, xmp.did:21148B683348E111BEED9667A03C8EC9, uuid:C3A5075A5F48DD11A967F2D595E78A32, xmp.did:15B5025AE64DE111A704DF1854440840, xmp.did:80E786D1729AE111BA42F2B36AC8F6CB, xmp.did:A55C87CB9F52E111B913B73FCC047B23, xmp.did:23148B683348E111BEED9667A03C8EC9, xmp.did:F6725BE08914E111B0C1B912F7E18E39, xmp.did:8FBFEF716711E111A9E086DCA5FD0281, xmp.did:D69D28FE6E56E1119540D2E6EE7FE320, xmp.did:63B1582E759AE111BA42F2B36AC8F6CB, xmp.did:65B1582E759AE111BA42F2B36AC8F6CB, xmp.did:67B1582E759AE111BA42F2B36AC8F6CB, xmp.did:69B1582E759AE111BA42F2B36AC8F6CB, xmp.did:6BB1582E759AE111BA42F2B36AC8F6CB, xmp.did:D09B96C6759AE111BA42F2B36AC8F6CB, xmp.did:D29B96C6759AE111BA42F2B36AC8F6CB, xmp.did:D49B96C6759AE111BA42F2B36AC8F6CB, xmp.did:D69B96C6759AE111BA42F2B36AC8F6CB, xmp.did:D89B96C6759AE111BA42F2B36AC8F6CB, xmp.did:D89B96C6759AE111BA42F2B36AC8F6CB, xmp.did:4FC5C03C769AE111BA42F2B36AC8F6CB, xmp.did:1BED2A9D4837E111922AD22926DF20AA, xmp.did:51C5C03C769AE111BA42F2B36AC8F6CB, xmp.did:53C5C03C769AE111BA42F2B36AC8F6CB, xmp.did:55C5C03C769AE111BA42F2B36AC8F6CB, xmp.did:57C5C03C769AE111BA42F2B36AC8F6CB, xmp.did:59C5C03C769AE111BA42F2B36AC8F6CB, xmp.did:B27971B6769AE111BA42F2B36AC8F6CB, xmp.did:B47971B6769AE111BA42F2B36AC8F6CB, xmp.did:B67971B6769AE111BA42F2B36AC8F6CB, xmp.did:B87971B6769AE111BA42F2B36AC8F6CB, xmp.did:8AF9C2E54049E111914DE4B0F1FA5244, xmp.did:69515D2E779AE111BA42F2B36AC8F6CB, xmp.did:6B515D2E779AE111BA42F2B36AC8F6CB, xmp.did:6D515D2E779AE111BA42F2B36AC8F6CB, xmp.did:6F515D2E779AE111BA42F2B36AC8F6CB, xmp.did:71515D2E779AE111BA42F2B36AC8F6CB, xmp.did:73515D2E779AE111BA42F2B36AC8F6CB, xmp.did:754AF881779AE111BA42F2B36AC8F6CB, xmp.did:774AF881779AE111BA42F2B36AC8F6CB, xmp.did:794AF881779AE111BA42F2B36AC8F6CB, xmp.did:7B4AF881779AE111BA42F2B36AC8F6CB, xmp.did:7D4AF881779AE111BA42F2B36AC8F6CB, xmp.did:9D5C87CB9F52E111B913B73FCC047B23, xmp.did:1BED2A9D4837E111922AD22926DF20AA, uuid:3F674894EDBCDE1185D1D9D309EE1DFE, uuid:42674894EDBCDE1185D1D9D309EE1DFE, uuid:9604D86E7F4FDC11A05FE732C1FAED7F, uuid:545EA4107B4FDC11A05FE732C1FAED7F, uuid:545EA4107B4FDC11A05FE732C1FAED7F, uuid:9604D86E7F4FDC11A05FE732C1FAED7F, uuid:585EA4107B4FDC11A05FE732C1FAED7F, adobe:docid:photoshop:ed645c8b-4cba-11da-bf84-f59405901279, adobe:docid:photoshop:31c0b141-4d52-11da-9063-86e0e23ed818, adobe:docid:photoshop:4e2f0bb6-4cbb-11da-bf84-f59405901279, adobe:docid:photoshop:ed645c8b-4cba-11da-bf84-f59405901279, adobe:docid:photoshop:4e2f0bb6-4cbb-11da-bf84-f59405901279, adobe:docid:photoshop:3d378fe2-f545-11d9-80f7-b1c380115801
Doc Change Count                : 22292
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Has XFA                         : No
Page Count                      : 141
Creator                         : Adobe InDesign CS4 (6.0.6)

EXIF Metadata provided by EXIF.tools

D Link IR626LA1 Wireless N300 Cloud Router User Manual

D Link Corporation Wireless N300 Cloud Router

User Manual.pdf

FCC ID Filing: KA2IR626LA1

Navigation menu

Namespaces

Views

Navigation