D Link IR645A1 Whole Home Router 1000 User Manual D Link DIR 645

Download:
Mirror Download [FCC.gov]
Document ID	1485051
Application ID	0U5rR9HUb/Q72kJmfQ/SFQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	316.03kB (3950387 bits)
Date Submitted	2011-06-17 00:00:00
Date Available	2011-06-17 00:00:00
Creation Date	2011-05-16 16:22:36
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2011-06-13 10:28:48
Document Title	D-Link DIR-645 User Manual
Document Creator	Adobe InDesign CS4 (6.0.6)
Document Author:	Nick Schuster

Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or
changes.
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or
product names mentioned herein are trademarks or registered trademarks of their respective companies.
Copyright © 2011 by D-Link Systems, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc.
D-Link DIR-645 User Manual
Table of Contents
Preface.............................................................................i
Trademarks....................................................................................................... i
Product Overview................................................................ 1
Package Contents............................................................................................ 1
System Requirements...................................................................................... 1
About this Product........................................................................................... 2
Features........................................................................................................... 2
Hardware Overview.......................................................................................... 3
Front Panel............................................................................................. 3
Back Panel.............................................................................................. 4
Bottom Panel.......................................................................................... 5
Hardware Installation........................................................... 6
Before You Begin............................................................................................. 6
Wireless Installation Considerations............................................................... 6
Connect to Cable/DSL/Satellite Modem.......................................................... 7
Connect to Another Router.............................................................................. 7
Software Configuration.......................................................... 8
Connect to the Web User Interface................................................................... 8
Web User Interface........................................................................................... 8
Setup Category................................................................................................ 9
Internet (Setup Wizard)......................................................................... 10
Internet (Manual).................................................................................. 17
Wireless Settings.................................................................................. 24
Network Settings................................................................................... 32
IPv6...................................................................................................... 35
Advanced Category........................................................................................ 53
Virtual Server........................................................................................ 55
Port Forwarding.................................................................................... 56
Application Rules.................................................................................. 57
QoS Engine........................................................................................... 58
Network Filter........................................................................................ 60
Access Control...................................................................................... 61
Website Filter........................................................................................ 64
Parental Control.................................................................................... 65
D-Link DIR-645 User Manual
Inbound Filter....................................................................................... 66
Firewall Settings................................................................................... 67
Routing................................................................................................. 69
Advanced Wireless................................................................................ 70
Wi-Fi Protected Setup........................................................................... 71
Advanced Network................................................................................ 73
DLNA Settings...................................................................................... 75
iTunes Server........................................................................................ 76
Guest Zone............................................................................................ 77
IPv6 Firewall......................................................................................... 78
IPv6 Routing......................................................................................... 79
Tools Category.............................................................................................. 80
Admin................................................................................................... 81
Time...................................................................................................... 83
Syslog................................................................................................... 84
Email Settings....................................................................................... 85
System.................................................................................................. 87
Firmware............................................................................................... 88
Dynamic DNS....................................................................................... 89
System Check....................................................................................... 91
Schedules............................................................................................. 92
Status Category............................................................................................. 93
Device Info............................................................................................ 94
Logs...................................................................................................... 96
Statistics............................................................................................... 97
Internet Sessions.................................................................................. 98
Wireless................................................................................................ 98
IPv6...................................................................................................... 99
IPv6 Routing......................................................................................... 99
Support Category........................................................................................ 100
Knowledge Base.............................................................. 101
Wireless Basics........................................................................................... 101
Wireless Modes........................................................................................... 103
Wireless Security......................................................................................... 104
What is WPA?..................................................................................... 104
ii
Networking Basics....................................................................................... 105
Connect to a Wireless Network.................................................................... 107
Using Window 7................................................................................. 107
Using Window 7 and WPS.................................................................. 109
Using Window Vista............................................................................ 112
Using Window XP............................................................................... 113
Troubleshooting............................................................... 114
Technical Specifications..................................................... 116
Warranty....................................................................... 117
Contacting Technical Support............................................... 123
Registration................................................................... 124
D-Link DIR-645 User Manual
iii
Section 1 - Product Overview
Product Overview
Package Contents
Check for the supplied accessories below:
• Wireless 802.11b/g/n Dual Band Router
• Power Adapter with extra Power Cable
• Ethernet Cable
• CD-ROM (with installation software and manuals)
• Quick Installation Guide
• Stand
• Mounting Kit
Note: Using a power supply with a different voltage rating than the one included with
the product, will cause damage and void the warranty for this product.
System Requirements
Computer Requirements:
• Window 7/Vista/XP (with SP3), 10/100/1000Mbps Ethernet LAN adapter, CD-ROM drive.
Network Requirements:
• 10/100/1000Mbps Ethernet LAN adapter, 802.11b/g/n Wireless Adapter, Ethernet-based Cable or DSL Modem.
Software Requirements:
• Operating System like Microsoft Windows, Macintosh, or Linux.
• Browser like Internet Explorer (6 or higher), Mozilla Firefox (3.0 or higher), Safari (3.0 or higher), or Chrome (2.0 or higher)
D-Link DIR-645 User Manual
Section 1 - Product Overview
About this Product
This user’s guide provides a wonderful insight into the functionality of the product called the D-Link DIR-645 Wireless Internet Router. This guide is based on the current
running firmware/software version available for this product and might touch on some new and exciting topics never seen on this product line before providing a rewarding
reading experience and in the end acts as a guide when installing and maintaining this product.
Features
The D-Link DIR-645 wireless router is packed with a load of features. Most of these features are what is expected from an Internet Wireless router, and then there are the features
that are unique to D-Link products.
• Internet Connectivity. In conjunction with a DSL or Cable Modem, this device can act as the Internet Gateway to your local network. Connections like, PPPoE, Static
and Dynamic IP Connections, PPTP, and L2TP connection can be made.
• Wireless LAN functionality. This router supports the full package of what the 802.11n protocol has to offer. Other remarkable features are WMM, Automatic Fallback,
RF Output Level Control, Latest Wireless Security requirements, WPS and much more.
• Networking. This router is equipped with 4 LAN ports, running at a speed of 10/100/1000Mbps, and 1 Internet port, running and the speed of 10/100/1000Mbps. This
device can handle a network of up to 1000 MAC addresses.
• Multicasting. Supports IGMPv2.
• DHCP. This device supports both Server and Client functionality.
• Quality of Service. QoS rules can be created to shape traffic based on weight or priority. IP Pools can be managed based on application port numbers.
• Advanced Security. The router supports also a list of security features like Network Filtering, Access Control, Website Filtering, Inbound Filtering and SPI.
• IPv6. One of the most attractive features of this router is the fact that not only does it support local IPv6 support, but also IPv6 Internet Connection support. This is truly
an Internet Gateway ahead of it’s time.
• More. Other features like DDNS, System Checking, Firmware Updates, Email Settings (for notification), and Schedules are also available on this device.
D-Link DIR-645 User Manual
Section 1 - Product Overview
Hardware Overview
Front Panel
Internet Light
A solid green light indicates that the Internet connection
negotiation has successfully been completed.
WPS Light and Button
Press the WPS button for 1 second to initiate the WPS
process. The button will flash green while a WPS
connection is being established. The button will light
green for 5 seconds if a successful WPS connection has
been made.
D-Link DIR-645 User Manual
Wireless Light
A solid green light indicates a link has been established.
A blinking green indicates the device is fail to connect
to the AP.
Power Light and Button
Press the button to power on the device. The LED
lights solid green to indicate the power is on. Press the
button again to turn it off.
Section 1 - Product Overview
Back Panel
USB Port
The USB port can be used for WPS enabled Wireless
USB adapters.
Ethernet Ports
The four LAN ports can be used for 10/100/1000Mbps
LAN connections.
Internet Port
The Internet (WAN) port can be used for connections like
a DSL/Cable modem.
D-Link DIR-645 User Manual
Power Receptor
Receptor for the supplied power adapter.
Section 1 - Product Overview
Bottom Panel
Reset Button
Press the button to restore the device to its original
factory default settings.
D-Link DIR-645 User Manual
Section 2 - Hardware Installation
Hardware Installation
This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet,
attic or garage.
Before You Begin
• The router is designed for use with the Ethernet port on your broadband modem. If you were using the USB connection before using the router, you must turn off your
modem and disconnect the USB cable. Connect an Ethernet cable to the WAN/Internet port on the router, and then turn the modem back on. In some cases, you may need
to call your ISP to change your connection type (USB to Ethernet).
• If you have DSL and are connecting via PPPoE, be sure to disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer.
Otherwise you will not be able to connect to the Internet.
• When running the Setup Wizard from the D-Link CD, make sure your computer is connected to the Internet and is online, otherwise the wizard will not work. If you have
disconnected any hardware, first re-connect your computer to the modem and make sure you are online.
Wireless Installation Considerations
The router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that
the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Ranges vary depending on the types of
materials and background RF (radio frequency) noise in your home or office. The key to maximizing the wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum. Each wall or ceiling can reduce your adapter’s range from 3 to
90 feet (1 to 30 meters.) Position your devices so that the number of walls and/or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree
angle it looks over 42 feet (14 meters) thick. Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3. Try to position access points, wireless routers, and computers so that the signal passes through open doorways and drywall. Materials such as glass, metal, brick,
insulation, concrete and water can affect wireless performance. Large objects such as fish tanks, mirrors, file cabinets, metal doors and aluminum studs may also have a
negative effect on range.
4. Keep your product at least 3 to 6 feet (1-2 meters) away from electrical devices or appliances that generate RF noise.
5. If you are using 2.4GHz cordless phones, make sure that the 2.4GHz phone base is as far away from your wireless device as possible. The base transmits a signal even
if the phone in not in use. In some cases, cordless phones, X-10 wireless devices, and electronic equipment such as ceiling fans, fluorescent lights, and home security
systems may dramatically degrade wireless connectivity.
D-Link DIR-645 User Manual
Section 2 - Hardware Installation
Connect to Cable/DSL/Satellite Modem
If you are connecting the router to a Cable/DSL/Satellite Modem, please follow the steps below:
1. Place the router in an open and central location. Do not plug the power adapter into the router.
2. Turn the power off on your modem. If there is no on/off switch, unplug the modem’s power adapter. Shut down your computer.
3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the WAN port on the router.
4. Plug an Ethernet cable into one of the LAN ports on the router. Plug the other end into the Ethernet port on your computer.
5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).
6. Plug the power adapter into the router and connect to an outlet or power strip. Wait about 30 seconds for the router to boot up.
7. Turn on your computer.
8. Verify that the Power LED on the router are lit. If the Power LED does not light up, make sure your computer, modem, and router are powered, on and verify that the cables
connected correctly.
9. In a later section in this manual we’ll discuss the Web GUI configuration of the router in more detail..
Connect to Another Router
If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have to do the following before connecting the router to your
network:
• Disable UPnP™
• Disable DHCP
• Change the LAN IP address to an available address on your network. The LAN ports on the router cannot accept a DHCP address from another router.
To connect to another router, please follow the steps below:
1. Plug the power into the router. Connect a computer to the router (LAN port) using an Ethernet cable. Make sure your IP address on the computer is 192.168.0.xxx (where
xxx is between 2 and 254). If you need to change the settings, write down your existing settings before making any changes. In most cases, your computer should be set
to receive an IP address automatically, in which case you will not have to do anything to your computer.
2. Open a web browser, type http://192.168.0.1 into the address bar, and press Enter. When the login window appears, set the username to ADMIN and leave the
password box empty. Click Login to continue.
3. Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settings to continue.
4. Click Setup and then click Network Settings. Uncheck the Enable DHCP Server server checkbox. Click Save Settings to continue.
5. Under Router Settings, enter an available Router IP address and the subnet mask of your network. Click Save Settings to save your settings. Use this new IP address to
access the configuration utility of the router in the future. Close the browser and change your computer’s IP settings back to the original values as in Step 1.
D-Link DIR-645 User Manual
Section 3 - Software Configuration
Software Configuration
This section will guide you through how to configure and use your D-Link wireless router using the Web graphical user interface..
Connect to the Web User Interface
To access the configuration utility, open a web-browser application such as Internet
Explorer and enter the IP address of the router in the address bar and click on Go.
Note: The default IP address for the router is 192.168.0.1
Log into the Router as follows:
• Select the ADMIN option from the drop-down menu and then enter your
password. By default the password field is blank.
• Click the Login button to log into the Router.
Web User Interface
After successfully logging into the Web User Interface, you should see this page. This
Web User Interface is divided into categories, found in the top menu, and pages,
found in the left menu.
The categories found on this router are Setup, Advanced, Tools, Status, and
Support. We will discuss these categories and their underlying pages in extensive
details later on in this manual.
D-Link DIR-645 User Manual
Section 3 - Software Configuration
Setup Category
In the Setup Category users will be able to configure features that are essential to the
functionality of this router.
The pages found in the Setup Category are:
Internet: On the Internet page, users can configure the method this router uses to
connect to the Internet. There are two types of configuration methods to choose from,
the Internet Connection Setup Wizard and the Manual Internet Connection Setup.
Wireless Settings: On the Wireless Settings page the user can configure the
Wireless settings for this device. There are 3 ways to configure the Wireless connection
on this router. Firstly, the user can choose to make use of the quick and easy Wireless
Connection Setup Wizard. Secondly, the user can choose to make use of the Wi-Fi
Protected Setup. Lastly, the user can configure the Wireless settings manually.
Network Settings: On the Network Settings page the user can configure the internal
network settings of the router and also be able to configure the built-in DHCP server
to assign IP addresses to computers on the network. The IP address that is configured
here is the IP address that is used to access the Web-based management interface. If
you change the IP address in this section, you may need to adjust your PC’s network settings to access the network again.
IPv6: On the IPv6 page, the user can configure the IPv6 connection type. There are two ways to set up the IPv6 Internet connection. You can use the Web-based IPv6 Internet
Connection Setup Wizard, or you can manually configure the connection.
D-Link DIR-645 User Manual
Section 3 - Software Configuration
Internet (Setup Wizard)
When configuring the router for the first time, we recommend that you click use the
Internet Connection Setup Wizard, and follow the instructions on the screen.
This wizard is designed to assist user with a quick and easy method to configure the
Internet Connectivity of this router.
Anytime during the Internet Connection Setup Wizard, the user can click on the
Cancel button to discard any changes made and return to the main Internet page.
Also the user can click on the Prev button, to return to the previous window for reconfiguration.
Welcome:
This wizard will guide you through a step-by-step process to configure your new
D-Link router and connect to the Internet.
Click Next to continue.
Step 1: Set Your Password
By default, the D-Link Router does not have a password configured for administrator
access to the Web-based configuration pages. To secure your new networking device,
please enter and verify a password in the spaces provided. The two passwords must
match.
Click Next to continue.
D-Link DIR-645 User Manual
10
Section 3 - Software Configuration
Step 2: Select Your Time Zone
Select the appropriate time zone for your location. This information is required to
configure the time-based options for the router.
Click Next to continue.
Step 3: Internet Connection
Here the user will be able to configure the Internet Connectivity used by this device. If
your ISP connection is listed in the drop-down menu select it and click Next. If your
ISP connection is not listed then you can proceed to select any of the other manual
Internet Connection methods listed below.
The following parameters will be available for configuration:
Dynamic IP Choose this if your Internet connection automatically
Address: provides you with an IP Address. Most Cable Modems use
this type of connection.
PPPoE: Choose this option if your Internet connection requires a
PPPoE username and password to get online. Most DSL
modems use this type of connection.
PPTP: Choose this option if your Internet connection requires a
PPTP username and password to get online.
L2TP: Choose this option if your Internet connection requires an
L2TP username and password to get online.
Static IP Address: Choose this option if your Internet Setup Provider provided
you with IP Address information that has to be manually
configured.
D-Link DIR-645 User Manual
11
Section 3 - Software Configuration
Step 3: Internet Connection (Dynamic IP Address)
After selecting the Dynamic IP Address Internet connection method, the following
page will appear.
The following parameters will be available for configuration:
MAC Address: Enter the MAC address of the Internet gateway (plugged into
the Internet port of this device) here.
Clone Button: If the configuration PC also acts as the Internet gateway, then
click on the Clone Your PC’s MAC Address button to copy
the PC’s MAC address into the space provided. If you’re not
sure, leave the MAC Address field blank.
Host Name: Enter the host name used here. You may also need to provide
a Host Name. If you do not have or know this information,
please contact your ISP.
Primary DNS Enter the Primary DNS IP address used here.
Address:
Secondary DNS Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection,
Address: but using a second DNS address provides more stability.
Click Next to continue.
D-Link DIR-645 User Manual
12
Section 3 - Software Configuration
Step 3: Internet Connection (PPPoE)
After selecting the PPPoE Internet connection method, the following page will appear:
The following parameters will be available for configuration:
Address Mode: Here the user can specify whether this Internet connection
requires the use of a Dynamic or Static IP address. PPPoE
usually requires a Dynamic IP configuration.
IP Address: Enter the PPPoE IP address used here. This option is only
available if Static IP is selected.
User Name: Enter the PPPoE account user name used here. This
information is given by the ISP.
Password: Enter the PPPoE account password used here. This
information is given by the ISP.
Verify Password: Re-enter the PPPoE account password used here.
Service Name: This optional field enables the user to enter a service name
to identify this Internet connection here.
Primary DNS Enter the Primary DNS IP address used here.
Address:
Secondary DNS Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection,
Address: but using a second DNS address provides more stability.
Click Next to continue.
D-Link DIR-645 User Manual
13
Section 3 - Software Configuration
Step 3: Internet Connection (PPTP)
After selecting the PPTP Internet connection method, the following page will appear:
The following parameters will be available for configuration:
Address Mode: Here the user can specify whether this Internet connection
requires the use of a Dynamic or Static IP address. PPTP
usual requires a Dynamic IP configuration.
PPTP IP Address: Enter the PPTP IP address used here. This option is only
available if Static IP is selected.
PPTP Subnet Enter the PPTP Subnet Mask used here.
Mask:
PPTP Gateway IP Enter the PPTP Gateway IP address used here.
Address:
PPTP Server IP Enter the PPTP Server IP address used here. This is normally
Address: the same a the PPTP Gateway IP address.
User Name: Enter the PPTP username used here.
Password: Enter the PPTP password used here.
Verify Password: Re-enter the PPTP password used here.
Primary DNS Enter the Primary DNS IP address used here.
Address:
Secondary DNS Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection,
Address: but using a second DNS address provides more stability.
Click Next to continue.
D-Link DIR-645 User Manual
14
Section 3 - Software Configuration
Step 3: Internet Connection (L2TP)
After selecting the L2TP Internet connection method, the following page will appear:
The following parameters will be available for configuration:
Address Mode: Here the user can specify whether this Internet connection
requires the use of a Dynamic or Static IP address. L2TP
usual requires a Dynamic IP configuration.
L2TP IP Address: Enter the L2TP IP address used here. This option is only
available if Static IP is selected.
L2TP Subnet Enter the L2TP Subnet Mask used here.
Mask:
L2TP Gateway IP Enter the L2TP Gateway IP address used here.
Address:
L2TP Server IP Enter the L2TP Server IP address used here. This is normally
Address: the same a the L2TP Gateway IP address.
User Name: Enter the L2TP username used here.
Password: Enter the L2TP password used here.
Verify Password: Re-enter the L2TP password used here.
Primary DNS Enter the Primary DNS IP address used here.
Address:
Secondary DNS Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection,
Address: but using a second DNS address provides more stability.
Click Next to continue.
D-Link DIR-645 User Manual
15
Section 3 - Software Configuration
Step 3: Internet Connection (Static IP Address)
After selecting the Static IP Address Internet connection method, the following page
will appear:
The following parameters will be available for configuration:
IP Address: Enter the Static IP address provided by the ISP here.
Subnet Mask: Enter the Subnet Mask provided by the ISP here.
Gateway Address: Enter the Gateway IP address provided by the ISP here.
Primary DNS Enter the Primary DNS IP address used here.
Address:
Secondary DNS Enter the Secondary DNS IP address used here. This field
Address: is normally optional. Only one DNS address is required for
a functional Internet connection, but using a second DNS
address provides more stability.
Click Next to continue.
Setup Complete!
This is the last page of the Internet Connection Setup Wizard.
Click the Connect button to save your settings.
D-Link DIR-645 User Manual
16
Section 3 - Software Configuration
Internet (Manual)
On this page the user can configure the Internet Connection settings manually. To
access the Manual Internet Connection Setup page, click on the Manual Internet
Connection Setup button. On this page there a multiple parameters that can be
configured regarding the Internet Connection setup. We’ll discuss them from top to
bottom.
At any given point the user can save the configuration done, on this page, by clicking
on the Save Settings button. If you choose to discard the changes made, click on
the Don’t Save Settings button.
Internet Connection Type
In this section, the user can select from a list of Internet Connection types that can be
configured and used on this router. Options to choose from are Static IP, Dynamic
IP, PPPoE, PPTP, L2TP, and DS-Lite.
After selecting a specific Internet Connection type, this page will automatically refresh
and provide unique fields to configure related to the specified Internet Connection
type.
My Internet Connection is: Dynamic IP (DHCP)
The default WAN configuration for this router is Dynamic IP (DHCP). This option
allows the router to obtain an IP address automatically from the device that is
connected to the Internet port.
Note: If you’re not sure about the type of Internet Connection you have, please contact
your Internet Service Provider (ISP) for assistance.
After selecting Dynamic IP, the following parameters will be available for configuration:
Host Name: The Host Name is optional but may be required by some
ISPs. Leave blank if you are not sure.
Use Unicasting: Tick this option if you ISP uses the unicast method to
provide IP addresses.
Primary DNS: Enter the Primary DNS IP address used here.
D-Link DIR-645 User Manual
17
Section 3 - Software Configuration
Secondary DNS: Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection,
but using a second DNS address provides more stability.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change
the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC
address with the MAC address of your Ethernet card.
My Internet Connection is: Static IP
Another Internet Connection type is Static IP. This option allows the user to manually
configure the Static IP Internet Connection type. Normally the information entered will
be supplied by your ISP.
After selecting Static IP, the following parameters will be available for configuration:
IP Address: Enter the Static IP address provided by the ISP here.
Subnet Mask: Enter the Subnet Mask provided by the ISP here.
Default Gateway: Enter the Gateway IP address provided by the ISP here.
Primary DNS: Enter the Primary DNS IP address used here.
Secondary DNS: Enter the Secondary DNS IP address used here. This field
is normally optional. Only one DNS address is required for
a functional Internet connection, but using a second DNS
address provides more stability.
MTU: Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your specific ISP. 1500
is the default MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change
the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC
address with the MAC address of your Ethernet card.
D-Link DIR-645 User Manual
18
Section 3 - Software Configuration
My Internet Connection is: PPPoE (Username/Password)
Another Internet Connection type is PPPoE. This option is typically used if you have a
DSL Internet Connection. Make sure to remove the PPPoE software installed on your
computer first before using this connection type. Most of the information needed for
this connection type is provided to you by your ISP.
After selecting PPPoE, the following parameters will be available for configuration:
Address Mode: Here the user can specify whether this Internet connection
requires the use of a Dynamic or Static IP address. PPPoE
usually requires a Dynamic IP configuration.
IP Address: Enter the PPPoE IP address used here. This option is only
available if Static IP is selected.
Username: Enter the PPPoE account user name used here. This
information is given by the ISP.
Password: Enter the PPPoE account password used here. This
information is given by the ISP.
Verify Password: Re-enter the PPPoE account password used here.
Service Name: This optional field enables the user to enter a service name
to identify this Internet connection here.
Reconnect Mode: Use the radio buttons to specify the reconnect mode. The user
can specify a custom schedule or specify the On Demand,
or Manual option. To specify a custom schedule, use the
drop-down menu to select one of the schedules that has
been defined in the Schedules page.
To create a new schedule, click the New Schedule button to open the Schedules page. Schedules will be discussed later.
Maximum Idle Enter a maximum idle time during which the Internet connection is maintained during inactivity.
Time:
DNS Mode: This option allow the router to obtain the DNS IP addresses from the ISP, when Receive DNS from ISP is selected, or allows the user to enter DNS
IP address manually, when Enter DNS Manually is selected.
Primary DNS Enter the Primary DNS IP address used here.
Server:
D-Link DIR-645 User Manual
19
Section 3 - Software Configuration
Secondary DNS
Server:
MTU:
MAC Address:
Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection,
but using a second DNS address provides more stability.
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU.
The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change
the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC
address with the MAC address of your Ethernet card.
My Internet Connection is: PPTP (Username/Password)
Another Internet Connection type is PPTP. This option is typically used if you have a
secure DSL Internet Connection. Most of the information needed for this connection
type is provided to you by your ISP.
After selecting PPTP, the following parameters will be available for configuration:
Address Mode: Here the user can specify whether this Internet connection
requires the use of a Dynamic or Static IP address. PPTP
usually requires a Dynamic IP configuration.
PPTP IP Address: Enter the PPTP IP address used here. This option is only
available if Static IP is selected.
PPTP Subnet Enter the PPTP Subnet Mask used here.
Mask:
PPTP Gateway IP Enter the PPTP Gateway IP address used here.
Address:
PPTP Server IP Enter the PPTP Server IP address used here. This is normally
Address: the same a the PPTP Gateway IP address.
Username: Enter the PPTP username used here.
Password: Enter the PPTP password used here.
Verify Password: Re-enter the PPTP password used here.
Reconnect Mode: Use the radio buttons to specify the reconnect mode. The user
can specify a custom schedule or specify the On Demand,
or Manual option. To specify a custom schedule, use the
drop-down menu to select one of the schedules that
D-Link DIR-645 User Manual
20
Section 3 - Software Configuration
has been defined in the Schedules page. To create a new schedule, click the New Schedule button to open the Schedules page. Schedules will be
discussed later.
Maximum Idle Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.
Time:
Primary DNS Enter the Primary DNS IP address used here.
Server:
Secondary DNS Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection,
Server: but using a second DNS address provides more stability.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change
the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC
address with the MAC address of your Ethernet card.
My Internet Connection is: L2TP (Username/Password)
Another Internet Connection type is L2TP. This option is typically used if you have a
secure DSL Internet Connection. Most of the information needed for this connection
type is provided to you by your ISP.
D-Link DIR-645 User Manual
21
Section 3 - Software Configuration
After selecting L2TP, the following parameters will be available for configuration:
Address Mode: Here the user can specify whether this Internet connection
requires the use of a Dynamic or Static IP address. L2TP
usual requires a Dynamic IP configuration.
L2TP IP Address: Enter the L2TP IP address used here. This option is only
available if Static IP is selected.
L2TP Subnet Enter the L2TP Subnet Mask used here.
Mask:
L2TP Gateway IP Enter the L2TP Gateway IP address used here.
Address:
L2TP Server IP Enter the L2TP Server IP address used here. This is normally
Address: the same a the L2TP Gateway IP address.
Username: Enter the L2TP username used here.
Password: Enter the L2TP password used here.
Verify Password: Re-enter the L2TP password used here.
Reconnect Mode: Use the radio buttons to specify the reconnect mode. The user
can specify a custom schedule or specify the On Demand,
or Manual option. To specify a custom schedule, use the
drop-down menu to select one of the schedules that has
been defined in the Schedules page. To create a new
schedule, click the New Schedule button to open the Schedules page. Schedules will be discussed later.
Maximum Idle Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.
Time:
Primary DNS Enter the Primary DNS IP address used here.
Server:
Secondary DNS Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection,
Server: but using a second DNS address provides more stability.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change
the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC
address with the MAC address of your Ethernet card.
D-Link DIR-645 User Manual
22
Section 3 - Software Configuration
My Internet Connection is: DS-Lite)
Another Internet Connection type is DS-Lite.
After selecting DS-Lite, the following parameters will be available for configuration:
DS-Lite Select the DS-Lite DHCPv6 Option to let the router
Configuration: allocate the AFTR IPv6 address automatically. Select the
Manual Configuration to enter the AFTR IPv6 address in
manually.
AFTR IPv6 After selecting the Manual Configuration option above, the
Address: user can enter the AFTR IPv6 address used here.
B4 IPv4 Address: Enter the B4 IPv4 address value used here.
WAN IPv6 Once connected, the WAN IPv6 address will be displayed
Address: here.
IPv6 WAN Default Once connected, the IPv6 WAN Default Gateway address will
Gateway be displayed here.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
23
Section 3 - Software Configuration
Wireless Settings
On this page the user can configure the Wireless settings for this device. There are 3
ways to configure Wireless using this router. Firstly, the user can choose to make use
for the quick and easy Wireless Connection Setup Wizard. Secondly, the user
can choose to make use Wi-Fi Protected Setup. Lastly, the user can configure the
Wireless settings manually.
Wireless Settings: Wireless Connection Setup Wizard
The Wireless Connection Setup Wizard is specially designed to assist basic network
users with a simple, step-by-step set of instructions to configure the wireless settings
of this router. It is highly recommended to customized the wireless network settings
to fit into your environment and to add higher security.
To initiate the Wireless Connection Setup Wizard click on the Wireless
Connection Setup Wizard button.
Step 1: In this step, the user must enter a custom Wireless Network Name or SSID
. Enter the new SSID name in the appropriate space provided. Secondly the user
can choose between two wireless security wizard configurations. The user can select
‘Automatically assign a network key’, by which the router will automatically
generate a WPA/WPA2 pre-shared key using the TKIP and AES encryption methods;
or the user can select ‘Manually assign a network key’, by which the user will
be prompt to manually enter a WPA/WPA2 pre-shared key using the TKIP and AES
encryption methods.
Click on the Prev button to return to the previous page. Click on the Next button to
continue to the next page. Click on the Cancel button to discard the changes made
and return to the main wireless page.
D-Link DIR-645 User Manual
24
Section 3 - Software Configuration
Step 2: This step will only be available if the user selected ‘Manually assign a network
key’ in the previous step. Here the user can manually enter the WPA/WPA2 pre-shared
key in the Wireless Security Password space provided. The key entered must be
between 8 and 63 characters long. Remember, this key will be used when wireless
clients wants to connect to this device. So please remember this key to prevent future
troubleshooting.
Click on the Prev button to return to the previous page. Click on the Next button to
continue to the next page. Click on the Cancel button to discard the changes made
and return to the main wireless page.
Setup Complete: On this page the user can view the configuration made and verify
whether they are correct.
Click on the Prev button to return to the previous page. Click on the Cancel button
to discard the changes made and return to the main wireless page. Click on the Save
button to accept the changes made.
After click the Save button the device will save the settings made and return to the
main wireless page.
D-Link DIR-645 User Manual
25
Section 3 - Software Configuration
Wireless Settings: Wi-Fi Protected Setup Wizard
If your Wireless Clients support the WPS connection method, this Wi-Fi Protected
Setup Wizard can be used to initiate a wireless connection between this device and
Wireless clients with a simple click of the WPS button. The Wi-Fi Protected Setup
Wizard is specially designed to assist basic network users with a simple, step-by-step
set of instructions to connect wireless clients to this router using the WPS method.
To initiate the Wi-Fi Protected Setup Wizard click on the Add Wireless Device
with WPS button.
Step 1: In this step the user have two options to choose from. You can choose Auto
if the wireless client supports WPS, or Manual if the wireless client does not support
WPS.
Click on the Prev button to return to the previous page. Click on the Next button to
continue to the next page. Click on the Cancel button to discard the changes made
and return to the main wireless page.
Step 2: After selecting Auto, the following page will appear. There are two ways to
add a wireless device, that supports WPS. Firstly, there is the Personal Identification
Number (PIN) method. Using this method will prompt the user to enter a PIN code.
This PIN code should be identical on the wireless client. Secondly, there is the Push
Button Configuration (PBC) method. Using this method will allow the wireless client
to connect to this device by similarly pressing the PBC button on it.
Click on the Prev button to return to the previous page. Click on the Next button to
continue to the next page. Click on the Cancel button to discard the changes made
and return to the main wireless page.
D-Link DIR-645 User Manual
26
Section 3 - Software Configuration
Step 2: After selecting Manual, the following page will appear. On this page to
user can view the wireless configuration of this router. The wireless clients should
configure their wireless settings to be identical to the settings displayed on this page
for a successful connection. This option is for wireless clients that can’t use the WPS
method to connect to this device.
Click on the Prev button to return to the previous page. Click on the Next button
to continue to the next page. Click on the Cancel button to discard the changes
made and return to the main wireless page. Click on the Wireless Status button to
navigate to the Status > Wireless page to view what wireless client are connected to
this device.
Wireless Settings: Manual Wireless Network Setup
The manual wireless network setup option allows users to configure the wireless
settings of this device manually. This option is for the more advanced user and
includes all parameters that can be configured for wireless connectivity.
To initiate the Manual Wireless Setup page, click on the Manual Wireless
Connection Setup button.
On this page the user can configure all the parameters related to the wireless
connectivity of this router.
D-Link DIR-645 User Manual
27
Section 3 - Software Configuration
The following parameters will be available for configuration:
Wireless Band: Displays the wireless band being configured. In this option
we find that the following parameters will be regarding the
2.4GHz band.
Enable Wireless: Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all the
wireless functions. Select the time frame that you would
like your wireless network enabled. The schedule may be
set to Always. Any schedule you create will be available in
the drop-down menu. Click New Schedule to create a new
schedule.
Wireless Network The Service Set Identifier (SSID) is the name of your wireless
Name: network. Create a name using up to 32 characters. The SSID
is case-sensitive. Enable Auto Channel
802.11 Mode: Here the user can manually select the preferred frequency band to use for this wireless network.
Enable Auto The auto channel selection setting can be selected to allow this device to choose the channel with the least amount of interference.
Channel Scan:
Wireless By default the channel is set to 1. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless
Channel: network. If you enable Auto Channel Selection, this option will be greyed out.
Transmission Select the transmit rate. It is strongly suggested to select Best (Automatic) for best performance.
Rate:
Channel Width: When using the 802.11n frequency band, the user have an option to choose between a 20MHz or 20/40MHz bandwidth.
Visibility Status: The Invisible option allows you to hide your wireless network. When this option is set to Visible, your wireless network name is broadcasted to anyone
within the range of your signal. If you are not using encryption then they could connect to your network. When Invisible mode is enabled, you must
enter the Wireless Network Name (SSID) on the client manually to connect to the network.
D-Link DIR-645 User Manual
28
Section 3 - Software Configuration
By default the wireless security of this router will be disabled. In this next option the
user can enabled or disable wireless security for the frequency band 2.4GHz. There
are two types of encryption that can be used. WEP or WPA/WPA2.
Wireless Security Mode: WEP
Wired Equivalent Privacy (WEP) is the most basic form of encryption that can be
used for wireless networks. Even though it is known as a ‘weak’ security method, it is
better than no security at all. Older wireless adapter sometimes only supports WEP
encryption and thus we still find this encryption method used today.
The following parameters will be available for configuration:
WEP Key Length: Here the user can specify to either use a 64Bit or a 128Bit
encrypted key.
Authentication: Authentication is a process by which the router verifies the
identity of a network device that is attempting to join the
wireless network. There are two types authentication for this
device when using WEP. Open System allows all wireless
devices to communicate with the router before they are
required to provide the encryption key needed to gain access
to the network. Shared Key requires any wireless device
attempting to communicate with the router to provide the
encryption key needed to access the network before they are
allowed to communicate with the router.
WEP Key 1: Enter the WEP key used here. For 64-bit keys you must enter 10 hex digits into each key box. For 128-bit keys you must enter 26 hex digits into each
key box. A hex digit is either a number from 0 to 9 or a letter from A to F. You may also enter any text string into a WEP key box, in which case it will
be converted into a hexadecimal key using the ASCII values of the characters. A maximum of 5 text characters can be entered for 64-bit keys, and a
maximum of 13 characters for 128-bit keys.
D-Link DIR-645 User Manual
29
Section 3 - Software Configuration
Wireless Security Mode: WPA-Personal
Wi-Fi Protected Access (WPA) is the most advanced and up to date wireless
encryption method used today. This is the recommended wireless security option.
WPA supports two authentication frameworks. Personal (PSK) and Enterprise (EAP).
Personal requires only the use of a pass-phrase (Shared Secret) for security.
The following parameters will be available for configuration:
WPA Mode: WPA is the older standard; select this option if the clients
that will be used with the router only support the older
standard. WPA2 is the newer implementation of the stronger
IEEE 802.11i security standard. With the “WPA2” option, the
router tries WPA2 first, but falls back to WPA if the client
only supports WPA. With the “WPA2 Only” option, the router
associates only with clients that also support WPA2 security.
Cipher Type: Select the appropriate cipher type to use here. Options to
choose from are Temporal Key Integrity Protocol (TKIP),
Advanced Encryption Standard (AES), and Both (TKIP and
AES).
Group Key Update Enter the amount of time before the group key used for
Interval: broadcast and multicast data is changed.
Pre-Shared Key: Enter the shared secret used here. This secret phrase needs
to be the same on all of the wireless clients for them to be
able to connect to the wireless network successfully.
D-Link DIR-645 User Manual
30
Section 3 - Software Configuration
Wireless Security Mode: WPA-Personal
Wi-Fi Protected Access (WPA) is the most advanced and up to date wireless
encryption method used today. This is the recommended wireless security option.
WPA supports two authentication frameworks. Personal (PSK) and Enterprise (EAP).
Personal requires only the use of a pass-phrase (Shared Secret) for security.
The following parameters will be available for configuration:
WPA Mode: WPA is the older standard; select this option if the clients
that will be used with the router only support the older
standard. WPA2 is the newer implementation of the stronger
IEEE 802.11i security standard. With the “WPA2” option, the
router tries WPA2 first, but falls back to WPA if the client
only supports WPA. With the “WPA2 Only” option, the router
associates only with clients that also support WPA2 security.
Cipher Type: Select the appropriate cipher type to use here. Options to
choose from are Temporal Key Integrity Protocol (TKIP),
Advanced Encryption Standard (AES), and Both (TKIP and
AES).
Group Key Update Enter the amount of time before the group key used for
Interval: broadcast and multicast data is changed.
RADIUS Server IP When the user chooses to use the EAP authentication
Address: framework, the RADIUS server’s IP address can be entered
here.
RADIUS Server When the user chooses to use the EAP authentication
Port: framework, the RADIUS server’s port number can be entered
here.
RADIUS Server Enter the shared secret used here. This secret phrase needs
Shared Secret: to be the same on all of the wireless clients for them to be
able to connect to the wireless network successfully.
D-Link DIR-645 User Manual
31
Section 3 - Software Configuration
Network Settings
On this page the user can configure the internal network settings of the router and also
able to configure the built-in DHCP server to assign IP addresses to computers on the
network. The IP address that is configured here is the IP address that is used to access
the Web-based management interface. If you change the IP address in this section,
you may need to adjust your PC’s network settings to access the network again.
The following parameters will be available for configuration:
Router IP Enter the IP address of the router. The default IP address is
Address: 192.168.0.1. If you change the IP address, once you click
Apply, you will need to enter the new IP address in your
browser to get back into the configuration utility.
Default Subnet Enter the Subnet Mask. The default subnet mask is
Mask: 255.255.255.0.
Host Name: Enter a Host Name to identify this device.
Local Domain Enter the local domain name used here. (Optional).
Name:
Enable DNS Uncheck the box to transfer the DNS server information from
Relay: your ISP to your computers. If checked, your computers will
use the router for a DNS server.
DHCP Server Settings
DHCP stands for Dynamic Host Control Protocol. This device has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the
LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers
on, they will automatically load the proper TCP/IP settings provided by the router. The DHCP Server will automatically allocate an unused IP address from the IP address pool
to the requesting computer. You must specify the starting and ending address of the IP address pool.
D-Link DIR-645 User Manual
32
Section 3 - Software Configuration
The following parameters will be available for configuration:
Enable DHCP Check this box to enable the DHCP server on your router.
Server: Uncheck to disable this function.
DHCP IP Address Enter the starting and ending IP addresses for the DHCP
Range: server’s IP assignment.
DHCP Lease The length of time for the IP address lease. Enter the Lease
Time: time in minutes.
Always If all the computers on the LAN successfully obtain their IP
Broadcast: addresses from the router’s DHCP server as expected, this
option can remain disabled. However, if one of the computers
on the LAN fails to obtain an IP address from the router’s
DHCP server, it may have an old DHCP client that incorrectly
turns off the broadcast flag of DHCP packets. Enabling this
option will cause the router to always broadcast its responses
to all clients, thereby working around the problem, at the
cost of increased broadcast traffic on the LAN.
NetBIOS Check this box to allow the DHCP Server to offer NetBIOS
announcement: configuration settings to the LAN hosts. NetBIOS allow LAN
hosts to discover all other computers within the network, e.g. within Network Neighborhood.
Learn NetBIOS If NetBIOS announcement is switched on, it will cause WINS information to be learned from the WAN side, if available. Turn this setting off to configure
from WAN: manually.
NetBIOS Scope: This is an advanced setting and is normally left blank. This allows the configuration of a NetBIOS ‘domain’ name under which network hosts operate.
This setting has no effect if the ‘Learn NetBIOS information from WAN’ is activated.
NetBIOS node This field indicates how network hosts are to perform NetBIOS name registration and discovery. H-Node, this indicates a Hybrid-State of operation.
type: First WINS servers are tried, if any, followed by local network broadcast. This is generally the preferred mode if you have configured WINS servers.
M-Node (default), this indicates a Mixed-Mode of operation. First Broadcast operation is performed to register hosts and discover other hosts, if
broadcast operation fails, WINS servers are tried, if any. This mode favours broadcast operation which may be preferred if WINS servers are reachable
by a slow network link and the majority of network services such as servers and printers are local to the LAN. P-Node, this indicates to use WINS
servers ONLY. This setting is useful to force all NetBIOS operation to the configured WINS servers. You must have configured at least the primary
WINS server IP to point to a working WINS server. B-Node, this indicates to use local network broadcast ONLY. This setting is useful where there are
no WINS servers available, however, it is preferred you try M-Node operation first. This setting has no effect if the ‘Learn NetBIOS information from
WAN’ is activated.
D-Link DIR-645 User Manual
33
Section 3 - Software Configuration
Primary WINS
Server IP
address:
Secondary
WINS Server IP
address:
Configure the IP address of the preferred WINS server. WINS Servers store information regarding network hosts, allowing hosts to ‘register’ themselves
as well as discover other available hosts, e.g. for use in Network Neighborhood. This setting has no effect if the ‘Learn NetBIOS information from WAN’
is activated.
Configure the IP address of the backup WINS server, if any. This setting has no effect if the ‘Learn NetBIOS information from WAN’ is activated.
Add/Edit DHCP Reservation
This option lets you reserve IP addresses, and assign the same IP address to the network device with the specified MAC address any time it requests an IP address. This is
almost the same as when a device has a static IP address except that the device must still request an IP address from the D-Link router. The D-Link router will provide the device
the same IP address every time. DHCP Reservations are helpful for server computers on the local network that are hosting applications such as Web and FTP. Servers on your
network should either use a static IP address or use this option.
The following parameters will be available for configuration:
Enable: Check this box to enable the reservation.
Computer Name: Enter the computer name. Alternatively, select a computer
that currently has a DHCP lease from the drop down menu
and click << to automatically populate the Computer Name,
IP Address, and MAC Address fields.
IP Address: Enter the IP address you want to assign to the computer or
device. This IP Address must be within the DHCP IP Address
Range.
MAC Address: Enter the MAC address of the computer or device.
DHCP Reservations List
This shows clients that you have specified to have reserved DHCP addresses. An
entry can be changed by clicking the Edit icon, or deleted by clicking the Delete icon.
When you click the Edit icon, the item is highlighted, and the ‘Edit DHCP Reservation’
section is activated for editing.
Number of Dynamic DHCP Clients
In this section you can see what LAN devices are currently leasing IP addresses.
D-Link DIR-645 User Manual
34
Section 3 - Software Configuration
IPv6
On this page, the user can configure the IPv6 Connection type. There are two ways
to set up the IPv6 Internet connection. You can use the Web-based IPv6 Internet
Connection Setup Wizard, or you can manually configure the connection.
IPv6 Internet Connection Setup Wizard
For the beginner user that have not configured a router before, click on the IPv6
Internet Connection Setup Wizard button and the router will guide you through
a few simple steps to get your network up and running.
After clicking on the IPv6 Internet Connection Setup Wizard button, this page will
appear.
Welcome to the D-Link IPv6 Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to configure your new
D-Link router and connect to the IPv6 Internet.
Click Next to continue to the next page. Click Cancel to discard the changes made
and return to the main page.
Step 1: Configure Your IPv6 Internet Connection
The router will try and detect whether its possible to obtain the IPv6 Internet Connection
type automatically. If this succeeds then the user will be guided through the input of
the appropriate parameters for the connection type found.
However, if the automatic detection fails, the user will be prompt to either Try again
or to click on the Guide me through the IPv6 settings button to initiate the
manual continual of the wizard.
D-Link DIR-645 User Manual
35
Section 3 - Software Configuration
Step 1: Configure Your IPv6 Internet Connection
There are several connection types to choose from. If you are unsure of your connection
method, please contact your IPv6 Internet Service Provider.
Note: If using the PPPoE option, you will need to ensure that any PPPoE client
software on your computers has been removed or disabled. The 3 options available on
this page is IPv6 over PPPoE, Static IPv6 address and Route, and Tunneling
Connection.
Choose the required IPv6 Internet Connection type and click on the Next button
to continue. Click on the Prev button to return to the previous page. Click on the
Cancel button to discard all the changes made and return to the main page.
Set Username and Password Connection (PPPoE)
After selecting the IPv6 over PPPoE option, the user will be able to configure the IPv6
Internet connection that requires a username and password to get online. Most DSL
modems use this type of connection.
The following parameters will be available for configuration:
PPPoE Session: Select the PPPoE Session value used here. This option will
state that this connection shares it’s information with the
already configured IPv6 PPPoE connection, or the user can
create a new PPPoE connection here.
User Name: Enter the PPPoE username used here. This information is
obtainable from the ISP.
Password: Enter the PPPoE password used here. This information is
obtainable from the ISP.
Verify Password: Re-enter the PPPoE password used here.
Service Name: Enter the service name for this connection here. This option is optional.
Click on the Next button to continue. Click on the Prev button to return to the previous page.
Click on the Cancel button to discard all the changes made and return to the main page.
D-Link DIR-645 User Manual
36
Section 3 - Software Configuration
Set Static IPv6 Address Connection
This mode is used when your ISP provides you with a set IPv6 addresses that does
not change. The IPv6 information is manually entered in your IPv6 configuration
settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway,
Primary DNS Server, and Secondary DNS Server. Your ISP provides you with all this
information.
The following parameters will be available for configuration:
Use Link-Local The Link-local address is used by nodes and routers when
Address: communicating with neighboring nodes on the same link.
This mode enables IPv6-capable devices to communicate
with each other on the LAN side.
IPv6 Address: Enter the WAN IPv6 address for the router here.
Subnet Prefix Enter the WAN subnet prefix length value used here.
Length:
Default Gateway: Enter the WAN default gateway IPv6 address used here.
Primary IPv6 DNS Enter the WAN primary DNS Server address used here.
Address:
Secondary IPv6 Enter the WAN secondary DNS Server address used here.
DNS Address:
LAN IPv6 These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The router’s LAN IPv6 Address configuration is based on the IPv6
Address: Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.)
Click on the Next button to continue. Click on the Prev button to return to the previous page.
Click on the Cancel button to discard all the changes made and return to the main page.
D-Link DIR-645 User Manual
37
Section 3 - Software Configuration
Tunneling Connection (6rd)
After selecting the Tunneling Connection (6rd) option, the user can configure the IPv6
6rd connection settings.
The following parameters will be available for configuration:
6rd IPv6 Prefix: Enter the 6rd IPv6 address and prefix value used here.
IPv4 Address: Enter the IPv4 address used here.
Mask Length: Enter the IPv4 mask length used here.
Assigned IPv6 Displays the IPv6 assigned prefix value here.
Prefix:
6rd Border Relay Enter the 6rd border relay IPv4 address used here.
IPv4 Address:
IPv6 DNS Server: Enter the primary DNS Server address used here.
Click on the Next button to continue. Click on the Prev button to return to the previous page.
Click on the Cancel button to discard all the changes made and return to the main page.
Setup Complete
The IPv6 Internet Connection Setup Wizard was completed.
Click on the Connect button to continue. Click on the Prev button to return to the
previous page. Click on the Cancel button to discard all the changes made and return
to the main page.
D-Link DIR-645 User Manual
38
Section 3 - Software Configuration
Manual IPv6 Internet Connection Option
For the advanced user that have configured a router before, click on the Manual IPv6
Internet Connection Setup button to input all the settings manually.
On this page the user can manually configure the mode that the Router will use to
access an IPv6 Internet connection. There are several connection types to choose
from: Link-local, Static IPv6, DHCPv6, Stateless Auto-Configuration, PPPoE, IPv6
over IPv4 Tunnel and 6to4. If you are unsure of your connection method, please
contact your IPv6 ISP.
IPv6 Connection Type: Link-Local Only
The Link-local address is used by nodes and routers when communicating with
neighboring nodes on the same link. This mode enables IPv6-capable devices to
communicate with each other on the LAN side.
The following parameters will be available for configuration:
LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used here.
Local  Address:
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
IPv6 Connection Type: Auto Detection
In the following section we’ll discuss the parameters that can be configured when
setting up an Auto Detection (Stateless/DHCPv6) connection. This is a method of
connection where the ISP assigns your IPv6 address when your router requests one
from the ISP’s server. Some ISP’s require you to make some settings on your side
before your router can connect to the IPv6 Internet.
D-Link DIR-645 User Manual
39
Section 3 - Software Configuration
The following parameters will be available for configuration:
Obtain IPv6 Select this option to obtain the DNS Server addresses
DNS Server automatically.
automatically:
Use the following Select this option to manually enter the DNS Server
IPv6 DNS addresses used.
Servers:
Primary DNS: Enter the primary DNS Server address used here.
Secondary DNS: Enter the secondary DNS Server address used here.
Use the section to configure the internal network settings of your router. The LAN IPv6 Link-Local Address is the IPv6 Address that you use to access the Web-based
management interface. If you change the LAN IPv6 Address here, you may need to adjust your PC’s network settings to access the network again. DHCP-PD can be used to
acquire a IPv6 prefix for the LAN interface.
The following parameters will be available for configuration:
Enable DHCP-PD: Select this option to enable DHCP PD.
LAN IPv6 Enter the LAN IPv6 address used here. This address must be
Address: in the ‘/64’ subnet.
LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used here.
Local Address:
The following parameters will be available for configuration:
Enable Automatic The user can tick this option to enable the auto-configuration
IPv6 address: feature.
Enable Automatic Tick this option to enable the automatic DHCP-PD on the
DHCP-PD in LAN: LAN.
Autoconfiguration The user can select the auto-configuration type used here.
Type:
Router This option is only available when the auto-configuration
Advertisement type is set to Stateless. Enter the router advertisement
Lifetime: lifetime value used here.
D-Link DIR-645 User Manual
40
Section 3 - Software Configuration
IPv6 Address This option is only available when the auto-configuration
Range (Start): type is set to Stateful. Enter the start IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address This option is only available when the auto-configuration
Range (End): type is set to Stateful. Enter the end IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address This option is only available when the auto-configuration
Lifetime: type is set to Stateful. Enter the IPv6 Address Lifetime (in
minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
IPv6 Connection Type: Static IPv6
In the following section we’ll discuss the parameters that can be configured when
setting up an Static IPv6 connection. This mode is used when your ISP provides you
with a set IPv6 addresses that does not change. The IPv6 information is manually
entered in your IPv6 configuration settings. You must enter the IPv6 address, Subnet
Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS Server.
Your ISP provides you with all this information.
The following parameters will be available for configuration:
Use Link-Local The Link-local address is used by nodes and routers when
Address: communicating with neighboring nodes on the same link.
This mode enables IPv6-capable devices to communicate
with each other on the LAN side.
IPv6 Address: Enter the WAN IPv6 address for the router here.
Subnet Prefix
Length:
Default Gateway: Enter the WAN default gateway IPv6 address used here.
D-Link DIR-645 User Manual
41
Section 3 - Software Configuration
Primary DNS Enter the WAN primary DNS Server address used here.
Server:
Secondary DNS Enter the WAN secondary DNS Server address used here.
Server:
The following parameters will be available for configuration:
LAN IPv6 Enter the LAN (local) IPv6 address for the router here.
Address:
LAN IPv6 Link- Displays the Router’s LAN Link-Local Address here.
Local Address:
The following parameters will be available for configuration:
Enable Automatic The user can tick this option to enable the auto-configuration
IPv6 address: feature.
Autoconfiguration The user can select the auto-configuration type used here.
Type:
Router This option is only available when the auto-configuration
Advertisement type is set to Stateless. Enter the router advertisement
Lifetime: lifetime value used here.
IPv6 Address This option is only available when the auto-configuration
Range (Start): type is set to Stateful. Enter the start IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address This option is only available when the auto-configuration
Range (End): type is set to Stateful. Enter the end IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address This option is only available when the auto-configuration
Lifetime: type is set to Stateful. Enter the IPv6 Address Lifetime (in
minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
42
Section 3 - Software Configuration
IPv6 Connection Type: Autoconfiguration (SLAAC/DHCPv6)
In the following section we’ll discuss the parameters that can be configured when
setting up an Autoconfiguration (SLAAC/DHCPv6) connection. This is a method of
connection where the ISP assigns your IPv6 address when your router requests one
from the ISP’s server. Some ISP’s require you to make some settings on your side
before your router can connect to the IPv6 Internet.
The following parameters will be available for configuration:
Obtain IPv6 Select this option to obtain the DNS Server addresses
DNS Servers automatically.
automatically:
Use the following Select this option to manually enter the DNS Server
IPv6 DNS addresses used.
Servers:
Primary DNS Enter the WAN primary DNS Server address used here.
Server:
Secondary DNS Enter the WAN secondary DNS Server address used here.
Server:
The following parameters will be available for configuration:
Enable DHCP-PD: Select this option to enable DHCP PD.
LAN IPv6 Enter the LAN IPv6 address used here. This address must be in the ‘/64’ subnet.
Address:
LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used here.
Local Address:
D-Link DIR-645 User Manual
43
Section 3 - Software Configuration
The following parameters will be available for configuration:
Enable Automatic The user can tick this option to enable the auto-configuration
IPv6 address: feature.
Enable Automatic Tick this option to enable the automatic DHCP-PD on the
DHCP-PD in LAN: LAN.
Autoconfiguration The user can select the auto-configuration type used here.
Type:
Router This option is only available when the auto-configuration
Advertisement type is set to Stateless. Enter the router advertisement
Lifetime: lifetime value used here.
IPv6 Address This option is only available when the auto-configuration
Range (Start): type is set to Stateful. Enter the start IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address This option is only available when the auto-configuration
Range (End): type is set to Stateful. Enter the end IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address This option is only available when the auto-configuration
Lifetime: type is set to Stateful. Enter the IPv6 Address Lifetime (in
minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
44
Section 3 - Software Configuration
IPv6 Connection Type: PPPoE
Select this option if your ISP requires you to use a PPPoE (Point to Point Protocol
over Ethernet) connection to IPv6 Internet. DSL providers typically use this option.
This method of connection requires you to enter a Username and Password (provided
by your Internet Service Provider) to gain access to the IPv6 Internet. The supported
authentication protocols are PAP and CHAP.
The following parameters will be available for configuration:
PPPoE Session: Select the PPPoE Session value used here. This option will
state that this connection shares it’s information with the
already configured IPv6 PPPoE connection, or the user can
create a new PPPoE connection here.
Address Mode: Select the appropriate address mode used here. Select
Dynamic IP if the ISP’s servers assign the router’s WAN
IPv6 address upon establishing a connection. If your ISP
has assigned a fixed IPv6 address, select Static IP. The ISP
provides the value for the IPv6 Address.
IP Address: Enter the ISP PPPoE IP address in here.
Username: Enter the PPPoE username used here. This information is obtainable from the ISP.
Password: Enter the PPPoE password used here. This information is obtainable from the ISP.
Verify Password: Re-enter the PPPoE password used here.
Service Name: Enter the service name for this connection here. This option is optional.
MTU: Enter the MTU value used here. The default value is 1492.
The following parameters will be available for configuration:
Obtain IPv6: Select this option to obtain the DNS Server addresses
automatically.
Use IPv6: Select this option to manually enter the DNS Server
addresses used.
Primary DNS: Enter the primary DNS Server address used here.
Secondary DNS: Enter the secondary DNS Server address used here.
D-Link DIR-645 User Manual
45
Section 3 - Software Configuration
The following parameters will be available for configuration:
Enable DHCP-PD: Select this option to enable DHCP PD.
LAN IPv6 Enter the LAN IPv6 address used here. This address must be
Address: in the ‘/64’ subnet.
LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used here.
Local Address:
The following parameters will be available for configuration:
Enable Automatic The user can tick this option to enable the auto-configuration
IPv6 address: feature.
Enable Automatic Tick this option to enable the automatic DHCP-PD on the
DHCP-PD in LAN: LAN.
Autoconfiguration The user can select the auto-configuration type used here.
Type:
Router This option is only available when the auto-configuration
Advertisement type is set to Stateless. Enter the router advertisement
Lifetime: lifetime value used here.
IPv6 Address This option is only available when the auto-configuration
Range (Start): type is set to Stateful. Enter the start IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address This option is only available when the auto-configuration
Range (End): type is set to Stateful. Enter the end IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address This option is only available when the auto-configuration
Lifetime: type is set to Stateful. Enter the IPv6 Address Lifetime (in
minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
46
Section 3 - Software Configuration
IPv6 Connection Type: IPv6 in IPv4 Tunnel
In section to the user can configure the IPv6 connection to run in IPv4 Tunnel mode.
IPv6 over IPv4 tunneling encapsulates IPv6 packets in IPv4 packets so that IPv6
packets can be sent over an IPv4 infrastructure.
The following parameters will be available for configuration:
Remote IPv4 Enter the remote IPv4 address used here.
Address:
Remote IPv6 Enter the remote IPv6 address used here.
Address:
Local IPv4 Enter the local IPv4 address used here.
Address:
Local IPv6 Enter the local IPv6 address used here.
Address:
Subnet Prefix Enter the Subnet prefix length value used here.
Length:
The following parameters will be available for configuration:
Obtain IPv6 Select this option to obtain the DNS Server addresses
DNS Servers automatically.
automatically:
Use the following Select this option to manually enter the DNS Server
IPv6 DNS addresses used.
Servers:
Primary DNS Enter the WAN primary DNS Server address used here.
Server:
Secondary DNS Enter the WAN secondary DNS Server address used here.
Server:
D-Link DIR-645 User Manual
47
Section 3 - Software Configuration
The following parameters will be available for configuration:
Enable DHCP-PD: Select this option to enable DHCP PD.
LAN IPv6 Enter the LAN IPv6 address used here. This address must be
Address: in the ‘/64’ subnet.
LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used here.
Local Address:
The following parameters will be available for configuration:
Enable Automatic The user can tick this option to enable the auto-configuration
IPv6 address: feature.
Enable Automatic Tick this option to enable the automatic DHCP-PD on the
DHCP-PD in LAN: LAN.
Autoconfiguration The user can select the auto-configuration type used here.
Type:
Router This option is only available when the auto-configuration
Advertisement type is set to Stateless. Enter the router advertisement
Lifetime: lifetime value used here.
IPv6 Address This option is only available when the auto-configuration
Range (Start): type is set to Stateful. Enter the start IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address This option is only available when the auto-configuration
Range (End): type is set to Stateful. Enter the end IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address This option is only available when the auto-configuration
Lifetime: type is set to Stateful. Enter the IPv6 Address Lifetime (in
minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
48
Section 3 - Software Configuration
IPv6 Connection Type: 6to4
In this section the user can configure the IPv6 6to4 connection settings. 6to4 is an
IPv6 address assignment and automatic tunneling technology that used to provide
unicast IPv6 connectivity between IPv6 sites and hosts across the IPv4 Internet.
The following parameters will be available for configuration:
6to4 Address: Here the 6to4 configured address will be displayed.
6to4 Relay: Enter the 6to4 relay address used here.
Primary DNS Enter the primary DNS Server address used here.
Server:
Secondary DNS Enter the secondary DNS Server address used here.
Server:
The following parameters will be available for configuration:
LAN IPv6 Enter the LAN IPv6 address used here. This address must be
Address: in the ‘/64’ subnet.
LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used here.
Local Address:
The following parameters will be available for configuration:
Enable Automatic The user can tick this option to enable the auto-configuration
IPv6 address: feature.
Autoconfiguration The user can select the auto-configuration type used here.
Type:
Router This option is only available when the auto-configuration
Advertisement type is set to Stateless. Enter the router advertisement
Lifetime: lifetime value used here.
D-Link DIR-645 User Manual
49
Section 3 - Software Configuration
The following parameters will be available for configuration:
Enable Automatic The user can tick this option to enable the auto-configuration
IPv6 address: feature.
Autoconfiguration The user can select the auto-configuration type used here.
Type:
IPv6 Address This option is only available when the auto-configuration
Range (Start): type is set to Stateful. Enter the start IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address This option is only available when the auto-configuration
Range (End): type is set to Stateful. Enter the end IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address This option is only available when the auto-configuration
Lifetime: type is set to Stateful. Enter the IPv6 Address Lifetime (in
minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
50
Section 3 - Software Configuration
IPv6 Connection Type: 6rd
In this section the user can configure the IPv6 6rd connection settings.
The following parameters will be available for configuration:
6rd Configuration: Select the desired 6rd configuration option here.
6rd IPv6 Prefix: Enter the 6rd IPv6 address and prefix value used here.
IPv4 Address: Enter the IPv4 address used here.
Mask Length: Enter the IPv4 mask length used here.
Assigned IPv6 Displays the IPv6 assigned prefix value here.
Prefix:
6rd Border Relay Enter the 6rd border relay IPv4 address used here.
IPv4 Address:
Primary DNS Enter the primary DNS Server address used here.
Server
Secondary DNS Enter the secondary DNS Server address uses here.
Server:
The following parameters will be available for configuration:
LAN IPv6 Enter the LAN IPv6 address used here. This address must be
Address: in the ‘/64’ subnet.
LAN IPv6 Link- Displays the LAN IPv6 Link-Local address used here.
Local Address:
D-Link DIR-645 User Manual
51
Section 3 - Software Configuration
The following parameters will be available for configuration:
Enable Automatic The user can tick this option to enable the auto-configuration
IPv6 address: feature.
Autoconfiguration The user can select the auto-configuration type used here.
Type:
Router This option is only available when the auto-configuration
Advertisement type is set to Stateless. Enter the router advertisement
Lifetime: lifetime value used here.
IPv6 Address This option is only available when the auto-configuration
Range (Start): type is set to Stateful. Enter the start IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address This option is only available when the auto-configuration
Range (End): type is set to Stateful. Enter the end IPv6 Address for the
DHCPv6 range for your local computers.
IPv6 Address This option is only available when the auto-configuration
Lifetime: type is set to Stateful. Enter the IPv6 Address Lifetime (in
minutes).
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
52
Section 3 - Software Configuration
Advanced Category
In this category the user will be able to configure the more advanced features that
can be done by this router. Features like Port Forwarding, Firewall settings, Quality of
Service settings and more.
The pages found in the Setup Category are:
Virtual Server: This router can be configured as a virtual server so that remote
users accessing Web or FTP services via the public IP address can be automatically
redirected to local servers in the LAN (Local Area Network).
Port Forwarding: The Port Forwarding option gives Internet users access to
services on your LAN. This feature is useful for hosting online services such as FTP,
Web or game servers.
Application Rules: Some applications require multiple connections, such as Internet
gaming, video conferencing, Internet telephony and others. These applications have
difficulties working through NAT (Network Address Translation). Special Applications
makes some of these applications work with the router. If you need to run applications
that require multiple connections, specify the port normally associated with an application in the “Trigger Port” field, select the protocol type as TCP or UDP, then enter
QoS Engine: The QoS Engine option helps improve your network gaming performance by prioritizing applications.
Network Filter: The MAC (Media Access Controller) Address filter option is used to control network access based on the MAC Address of the network adapter. This feature
can be configured to ALLOW or DENY network/Internet access.
Access Control: The Access Control option allows you to control access in and out of your network.
Website Filter: Website Filters are used to allow you to set up a list of Web sites that can be viewed by multiple users through the network.
Parental Control: Parental control is a free security option that provides Anti-Phishing to protect your Internet connection from fraud and navigation improvements such as
auto-correction of common URL types.
Inbound Filter: The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound data filtering
rules that control data based on an IP address range.
Firewall Settings: The router offers a firewall type functionality. The SPI feature helps prevent cyber attacks. If you choose to expose a computer, you can enable DMZ.
Routing: The Routing option is an advanced method of customizing specific routes of data through your network.
Advanced Wireless: These options are for users that wish to change the behavior of their 802.11n wireless radio from the standard settings.
Wi-Fi Protected Setup: Wi-Fi Protected Setup (WPS) System is a simplified method for securing your wireless network during the “Initial setup” as well as the “Add New
Device” processes.
Advanced Network: This section contains settings which can change the way the router handles certain types of traffic.
DLNA Settings: DLNA (Digital Living Network Alliance) is the standard for the interoperability of Network Media Devices (NMDs). The user can enjoy multi-media applications
(music, pictures and videos) on your network connected PC or media devices. If you agree to share media with devices, any computer or device that connects to your network
can play your shared music, pictures and videos.
D-Link DIR-645 User Manual
53
Section 3 - Software Configuration
iTunes Server: The router features an iTunes Server. This server provides the ability to share music and videos to computers on the local network running iTunes. If the server
is enabled, the router will be automatically detected by the iTunes program and the music and videos contained in the specified directory will be available to stream over the
network.
Guest Zone: On this page, the user will be able to configure the Guest Zone, settings. The guest zone provide a separate network zone for guest to access Internet.
IPv6 Firewall: On this page the user can configure the IPv6 firewall settings. The firewall settings section is an advance feature that is used to allow or deny traffic from
passing through the device. It works in the same way as IP Filters with additional settings.
IPv6 Routing: On this page the user can specify custom routes that determine how data is moved around your IPv6 network.
D-Link DIR-645 User Manual
54
Section 3 - Software Configuration
Virtual Server
This router can be configured as a virtual server so that remote users accessing
Web or FTP services via the public IP address can be automatically redirected to
local servers in the LAN (Local Area Network). The router’s firewall feature filters out
unrecognized packets to protect the LAN network so all computers networked with
the router are invisible to the outside world. The user can make some of the LAN
computers accessible from the Internet by enabling Virtual Server.
Depending on the requested service, the router redirects the external service request to the appropriate server within the LAN network. The router is also capable of portredirection, meaning that incoming traffic to a particular port may be redirected to a different port on the server computer.
The following parameters will be available for configuration:
Checkbox: Check the box on the left side to enable the Virtual Server
rule.
Name: Enter a name for the rule or select an application from the
drop-down menu. Select an application and click << to
populate the fields.
IP Address: Enter the IP address of the computer on your local network
that you want to allow the incoming service to. If your
computer is receiving an IP address automatically from the
router (DHCP), you computer will be listed in the Computer
Name drop-down menu. Select your computer and click <<.
Port: Enter the port that you want to open next to Public Port and Private Port. The public and private ports are usually the same. The public port is the port
seen from the Internet side, and the private port is the port being used by the application on the computer within your local network.
Traffic Type: Select TCP, UDP, or All from the Protocol drop-down menu.
Schedule: Use the drop-down menu to schedule the time that the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the
particular service to always be enabled. You can create your own times in the Schedules page.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
55
Section 3 - Software Configuration
Port Forwarding
The Port Forwarding option gives Internet users access to services on your LAN. This
feature is useful for hosting online services such as FTP, Web or game servers. For
each entry, you define a public port on your router for redirection to an internal LAN IP
Address and LAN port. This option is used to open multiple ports or a range of ports
in your router and redirect data through those ports to a single PC on your network.
This feature allows you to enter ports in the format, Port Ranges (100-150),
Individual Ports (80, 68, 888), or Mixed (1020-5000, 689). This option is only applicable to the INTERNET session.
The following parameters will be available for configuration:
Checkbox: Tick the checkbox on the left side to enable the Port
Forwarding rule.
Name: Enter a name for the rule or select an application from the
drop-down menu. Select an application and click << to
populate the fields.
IP Address: Enter the IP address of the computer on your local network
that you want to allow the incoming service to. If your
computer is receiving an IP address automatically from the
router (DHCP), you computer will be listed in the Computer
Name drop-down menu. Select your computer and click <<.
Ports to Open: Enter the external port number in the appropriate space provided. If the port number is TCP then enter the number in the TCP space, and if the port
number is UDP than enter it in the UDP space.
Schedule: Use the drop-down menu to schedule the time that the Port Forwarding rule will be enabled. The schedule may be set to Always, which will allow the
particular service to always be enabled. You can create your own times in the Schedules page.
Inbound Filter: Select the inbound filter rule here. Options to choose from are Allow All, Deny All, and any other custom rule created.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
56
Section 3 - Software Configuration
Application Rules
Some applications require multiple connections, such as Internet gaming, video
conferencing, Internet telephony and others. These applications have difficulties
working through NAT (Network Address Translation). Special Applications makes
some of these applications work with the router. If you need to run applications that
require multiple connections, specify the port normally associated with an application
in the “Trigger Port” field, select the protocol type as TCP or UDP, then enter
the firewall (public) ports associated with the trigger port to open them for inbound traffic.
The following parameters will be available for configuration:
Checkbox: Check the box on the left side to enable the Application Rule.
Name: Enter a name for the rule. You may select a predefined
application from the Application drop‑down menu and click
<<.
Application: Displays a list of predefined application to use in the rules.
Port (Trigger): This is the port used to trigger the application. It can be
either a single port or a range of ports.
Port (Firewall): This is the port number on the Internet side that will be used
to access the application. You may define a single port or a
range of ports. You can use a comma to add multiple ports
or port ranges.
Traffic Type: Select the protocol of the firewall port (TCP, UDP, or All).
Schedule: The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always
be enabled. You can create your own times in the Schedules page.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
57
Section 3 - Software Configuration
QoS Engine
The QoS Engine option helps improve your network gaming performance by prioritizing
applications. By default the QoS Engine settings are disabled and application priority
is not classified automatically. The QoS section contains a queuing mechanism,
traffic shaping and classification. It supports two kinds of queuing mechanisms. Strict
Priority Queue (SPQ) and Weighted Fair Queue (WFQ). SPQ will process traffic based
on traffic priority. Queue1 has the highest priority and Queue4 has the lowest
priority. WFQ will process traffic based on the queue weight. Users can configure each queue’s weight. The sum of all the queue’s weight must be 100. When surfing the Internet,
the system will do traffic shaping based on the uplink and downlink speed. The classification rules can be used to classify traffic to different queues, then SPQ or WFQ will do
QoS based on the queue’s priority or weight.
The following parameters will be available for configuration:
Enable QoS: This option is disabled by default. Enable this option for
better performance and experience with online games and
other interactive applications, such as VoIP.
Uplink Speed: The speed at which data can be transferred from the router
to your ISP. This is determined by your ISP. ISP’s often
define speed as a download/upload pair. For example,
1.5Mbits/284Kbits. Using this example, you would enter
284. Alternatively you can test your uplink speed with a
service such as www.dslreports.com.
Downlink Speed: The speed at which data can be transferred from the ISP
to the router. This is determined by your ISP. ISP’s often
define speed as a download/upload pair. For example,
1.5Mbits/284Kbits.
Using this example, you would enter 1500. Alternatively you can test your downlink speed with a service such as www.dslreports.com.
Queue Type: Here the user can specify the queue type used. When choosing the option Strict Priority Queue, the router will apply QoS based on the internal
specification for the queue ID’s listed. When choosing the option Weight Fair Queue, the router will apply QoS based on the user defined percentage
in the Queue Weight column.
Queue ID: In this column the Queue ID used will be displayed.
Queue Priority: In this column the Queue Priority used will be displayed.
Queue Weight: After choosing to use the Weight Fair Queue option, under Queue Type, the user will be able to manual enter the Queue Weight for each individual
Queue ID.
D-Link DIR-645 User Manual
58
Section 3 - Software Configuration
After specifying the QoS framework used, in the QoS setup section, the user can now create individual rules for scenarios that require the use of traffic control and data priority
manipulation.
The following parameters will be available for configuration:
Checkbox: Tick this option to enable the rule specified.
Name: Enter a custom name for the rule being created here. This
name is used for identification.
Queue ID: Select the appropriate priority requirement from the dropdown menu that will be applied to this rule. Option to choose
from are Highest, Higher, Normal, and Best Effort.
Protocol: Select the protocol used for the application for in the dropdown menu and it will automatically place it in the Protocol
field.
Local IP Range: Enter the local IP range used here. This is the IP range of
you Local Area Network. The Router’s IP cannot be included
in this range.
Remote IP Enter the remote IP range used here. This is the IP range of
Range: the public network from the Internet Port side. To apply this
rule to any IP addresses from the public side, enter the range
0.0.0.1 to 255.255.255.254.
Application Port: Enter the application port number used here.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
59
Section 3 - Software Configuration
Network Filter
The MAC (Media Access Controller) Address filter option is used to control network
access based on the MAC Address of the network adapter. A MAC address is a unique
ID assigned by the manufacturer of the network adapter. This feature can be configured
to ALLOW or DENY network/Internet access.
In the MAC Filtering Rules section, the user can create and edit Network filter rules. This maximum amount of rules that can be created are 24 rules.
The following parameters will be available for configuration:
Configure MAC Select Turn MAC Filtering OFF, Turn MAC Filtering ON
Filtering below: and ALLOW computers listed to access the network,
or Turn MAC Filtering ON and DENY computers
listed to access the network from the drop-down menu.
Checkbox: Check the box on the left side to enable the Network Filter.
MAC Address: Enter the MAC address you would like to use in this filtering
rule.
DHCP Client List: Select a DHCP client from the Computer Name drop-down
menu and click << to copy that MAC Address.
Schedule: The schedule of time when the Network Filter will be enabled.
The schedule may be set to Always, which will allow the
particular service to always be enabled. Click the New
Schedule button to create your own times in the Schedules
page.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
60
Section 3 - Software Configuration
Access Control
The Access Control option allows you to control access in and out of your network.
Use this feature as Access Controls to only grant access to approved sites, limit web
access based on time or dates, and/or block internet access for applications like P2P
utilities or games.
The following parameters will be available for configuration:
Enable Access Tick this option to enable the Access Control feature.
Control:
Add Policy: Click on this button to add a new Access Control Policy.
After clicking on the Add Policy button, the add policy wizard will guide you through
the step-by-step process in adding a new policy. The first window explains the process.
Throughout this wizard the user will be able to:
Click on the Prev button to return to the previous window.
Click on the Next button to continue to the next window.
Click on the Cancel button to discard the changes made and return to the main
Access Control window.
Step 1: In the first step, the user can enter the policy name used.
The following parameters will be available for configuration:
Policy Name: Enter the new policy name used for this rule here.
D-Link DIR-645 User Manual
61
Section 3 - Software Configuration
Step 2: In the second step, the user can configure the schedule settings for this rule.
The following parameters will be available for configuration:
Details: Select the appropriate predefined schedule rule to apply to
this rule from the drop-down menu.
Step 3: In the third step, the user can configure the address type and IP address of
the machines used in this rule.
The following parameters will be available for configuration:
Address Type: Specify a machine with its IP or MAC address, or select
‘Other Machines’ for machines that do not have a policy.
IP Address: After selecting the IP address type, the user can enter the IP
address of the machines used in this rule here. Alternatively,
the user can select a Computer from the Computer Name
list.
Machine Address: After selecting the MAC address type, the user can enter
the MAC address of the machine used in this rule here.
Alternatively, the used can select a Computer from the
Computer Name list.
Add: Click on this button to add the machine to the list.
Update: After clicking the
option, the user will be able to update the machine information.
Delete: If the user chooses to remove a machine from the list, click on the
icon.
Step 4: In the fourth step, the user can select the filtering method used for this rule.
The following parameters will be available for configuration:
Method: Here the user can select the filtering method used. Options
to choose from are ‘Log Web Access Only’, ‘Block All
Access’, and ‘Block Some Access’.
D-Link DIR-645 User Manual
62
Section 3 - Software Configuration
The following parameters will be available for configuration:
Apply Web Filter: After selecting the ‘Block Some Access’ option, the user
will be able to select this option. Selecting this option will
allow the web filter access control feature to be applied to
this rule.
Apply Advanced After selecting the ‘Block Some Access’ option, the user
Port Filters: will be able to select this option. Selecting this option will
allow the advanced port filters access control feature to be
applied to this rule.
Click on the Save button to accept the changes made and return to the main Access
Control window.
In the Policy Table section a list on access control rules will be displayed.
To edit a specific rule, click on the
icon.
To remove a specific rule, click on the
icon.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
63
Section 3 - Software Configuration
Website Filter
Website Filters are used to allow you to set up a list of Web sites that can be viewed
by multiple users through the network.
Website Filter is used to allow or deny computers on your network from accessing
specific web sites by keywords or specific Domain Names. Select ‘ALLOW
computers access to ONLY these sites’ in order only allow computers on
your network to access the specified URLs and Domain Names. ‘DENY computers
access to ONLY these sites’ in order deny computers on your network to access
the specified URLs and Domain Names.
The following parameters will be available for configuration:
Website URL/ Enter the URL or Domain name that you want to allow or
Domain: block here.
An example of an URL is: http://www.facebook.com/
An example of a domain name is: facebook.com
Click on the Clear the list below... button to remove all the entries from the spaces
in the list.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
64
Section 3 - Software Configuration
Parental Control
Parental control is a free security option that provides Anti-Phishing to protect your
Internet connection from fraud and navigation improvements such as auto-correction
of common URL types.
The following parameters will be available for configuration:
Advanced DNS: Select this option to enable a fast and reliable DNS with
minimal blocking of phishing sites only. No OpenDNS
account required.
FamilyShield: Select this option to enable a fast and reliable DNS with nonconfigurable blocking of sites that are inappropriate or risky
for children. No OpenDNS account required.
Parental Control: Select this option to enable a fast and reliable DNS with
configurable content filtering and phishing protection.
This option includes an OpenDNS account. Click on the
‘Register your device’ link to navigate to the OpenDNS
account website, where you can either login (if you have
an existing account) or you can register a new OpenDNS
account. After the registration, a new link will appear, called
‘Configuration of OpenDNS settings’, where the user
can freely configure their OpenDNS account to their liking.
None: Select this option to enable the option to specify the DNS
servers provided via DHCP by their ISP or their own
preferred DNS servers.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
65
Section 3 - Software Configuration
Inbound Filter
The Inbound Filter option is an advanced method of controlling data received from the
Internet. With this feature you can configure inbound data filtering rules that control
data based on an IP address range. Inbound Filters can be used for limiting access
to a server on your network to a system or group of systems. Filter rules can be used
with Virtual Server, Port Forwarding, or Remote Administration features. The user can
add new Inbound filter rule in the next section.
The following parameters will be available for configuration:
Name: The user can enter a custom name for the inbound filter rule
here.
Action: Select an action that will take place when this rule is initiated.
Options to choose from are Allow and Deny.
Enable: Tick this option to enable the specified IP range for this rule.
Remote IP Start: Enter the remote starting IP address here in the range.
Remote IP End: Enter the remote ending IP address here in the range.
Add: Click this button to add the new inbound filter rule.
Cancel: Click this button to discard the new inbound filter rule.
In the Inbound Filter Rules List section, the user can view a list of the inbound
filter rules already created. To edit a specific rule, click on the
icon. The delete a
specific rule, click on the
D-Link DIR-645 User Manual
icon.
66
Section 3 - Software Configuration
Firewall Settings
A firewall protects your network from the outside world. The router offers a firewall
type functionality. The SPI feature helps prevent cyber attacks. Sometimes you may
want a computer exposed to the outside world for certain types of applications. If you
choose to expose a computer, you can enable DMZ. DMZ is short for Demilitarized
Zone. This option will expose the chosen computer completely to the outside world.
The following parameters will be available for configuration:
Enable SPI: Check the Enable SPI box to enable the SPI (Stateful
Packet Inspection, also known as dynamic packet filtering)
feature. Enabling SPI helps to prevent cyber attacks by tracking more state per session. It validates that the traffic passing through the session
conforms to the protocol.
The following parameters will be available for configuration:
UDP Endpoint Select the appropriate NAT UDP endpoint filtering method
Filtering: here. Options to choose from are ‘Endpoint Independent’,
‘Address Restricted’, and ‘Port And Address
Restricted’.
TCP Endpoint Select the appropriate NAT TCP endpoint filtering method
Filtering: here. Options to choose from are ‘Endpoint Independent’,
‘Address Restricted’, and ‘Port And Address
Restricted’.
The following parameters will be available for configuration:
Enable anti-spoof Tick this option to enable the anti-spoof checking feature.
checking:
D-Link DIR-645 User Manual
67
Section 3 - Software Configuration
Firewall rules can be used to allow or deny traffic passing through the router. You
can specify a single port by utilizing the input box at the top or a range of ports by
utilizing both input boxes. DMZ means “Demilitarized Zone”. DMZ allows computers
behind the router firewall to be accessible to Internet traffic. Typically, your DMZ
would contain Web servers, FTP servers and others.
The following parameters will be available for configuration:
Enable DMZ: Tick this option to enable the DMZ feature.
DMZ IP Address: Enter the IP address of the computer on the LAN that you
want to have unrestricted Internet communication in the
DMZ IP address field. To specify an existing DHCP client,
use the Computer Name drop-down to select the computer that you want to make a DMZ host. If selecting a computer that is a DHCP client, be sure
to make a static reservation in the Setup > Network Settings page so that the IP address of the DMZ machine does not change.
The following parameters will be available for configuration:
PPTP: Tick this option to allow PPTP access to the LAN network.
IPSec (VPN): Tick this option to allow IPSec (VPN) access to the LAN
network.
RSTP: Tick this option to allow RSTP access to the LAN network.
SIP: Tick this option to allow SIP access to the LAN network.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
68
Section 3 - Software Configuration
Routing
The Routing option is an advanced method of customizing specific routes of data
through your network.
In the Routing List section, the user can configure routing rules used by this router.
The maximum amount of rules that can be configured is 32.
The following parameters will be available for configuration:
Checkbox: To enable a route, check the box that is on the left side of
the route.
Name: Enter a name for the rule used here.
Destination IP: Enter the IP address of the packets that will take this route.
Netmask: Enter the netmask to specify the subnet of the IP packets that
will take this route.
Gateway: Enter the next hop that will be taken if this route is used.
Metric: Enter the metric value that this route will use here.
Interface: Use the drop-down menu to specify if the IP packet must use the WAN or LAN interface to transit out of the Router.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
69
Section 3 - Software Configuration
Advanced Wireless
These options are for users that wish to change the behavior of their 802.11n wireless
radio from the standard settings. We do not recommend changing these settings from
the factory defaults. Incorrect settings may impact the performance of your wireless
radio. The default settings should provide the best wireless radio performance in most
environments.
The following parameters will be available for configuration:
Wireless Band: Here the user can view the wireless frequency band being
configured. In the case 2.4GHz.
Transmit Power: This option sets the transmit power of the antennas.
Beacon Period: Beacons are packets sent by an Access Point to synchronize
a wireless network. Specify a value. 100 is the default setting
and is recommended.
RTS Threshold: Here the user can enter the RTS threshold value used.
This value should remain at its default setting of 2346. If
inconsistent data flow is a problem, only a minor modification
should be made.
Fragmentation: The fragmentation threshold, which is specified in bytes,
determines whether packets will be fragmented.
Packets exceeding the 2346 byte setting will be fragmented before transmission. 2346 is the default setting.
DTIM Interval: Here the user can enter the DTIM Interval value. Delivery Traffic Indication Message (DTIM) is a countdown informing clients of the next window for
listening to broadcast and multicast messages. The default settings is 1.
WMM Enable: Check this box to enable the WMM feature.
Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may create higher data loss.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
70
Section 3 - Software Configuration
Wi-Fi Protected Setup
Wi-Fi Protected Setup (WPS) System is a simplified method for securing your wireless
network during the “Initial setup” as well as the “Add New Device” processes. The WiFi Alliance (WFA) has certified it across different products as well as manufactures.
The process is just as easy, as depressing a button for the Push-Button Method or
correctly entering the 8-digit code for the Pin-Code Method. The time reduction in
setup and ease of use are quite beneficial, while the highest wireless Security setting
of WPA2 is automatically used.
In the Wi-Fi Protected Setup section, the user can enable the WPS feature of this router.
The following parameters will be available for configuration:
Enable: Tick this option to enable the Wi-Fi Protected Setup feature.
WiFi Protected This parameter displays the WPS setup status.
Setup:
Lock Wireless Tick this option to lock the configured wireless security
Security Settings: settings.
In the PIN Settings section, the user not only will be able to view the PIN code, but will also be able to reset the PIN to default or to generate a new PIN code. A PIN is a unique
number that can be used to add the router to an existing network or to create a new network. The default PIN may be printed on the bottom of the router. For extra security, a
new PIN can be generated. You can restore the default PIN at any time. Only the Administrator (“admin” account) can change or reset the PIN.
The following parameters will be available for configuration:
PIN: Shows the current value of the router’s PIN.
Reset PIN to Click this button to restore the default PIN of the router.
Default:
Generate New Click this button to create a random number that is a valid
PIN: PIN. This becomes the router’s PIN. You can then copy this
PIN to the user interface of the registrar.
Click the ‘Connect your Wireless Device’ button to start Wireless Connection
Setup Wizard. This wizard helps you add wireless devices to the wireless network.
D-Link DIR-645 User Manual
71
Section 3 - Software Configuration
Step 1: In this step the user have two options to choose from. You can choose Auto
if the wireless client supports WPS, or Manual if the wireless client does not support
WPS.
Click on the Prev button to return to the previous page. Click on the Next button to
continue to the next page. Click on the Cancel button to discard the changes made
and return to the main wireless page.
Step 2: After selecting Auto, the following page will appear. There are two ways to
add a wireless device, that supports WPS. Firstly, there is the Personal Identification
Number (PIN) method. Using this method will prompt the user to enter a PIN code.
This PIN code should be identical on the wireless client. Secondly, there is the Push
Button Configuration (PBC) method. Using this method will allow the wireless client
to connect to this device by similarly pressing the PBC button on it.
Click on the Prev button to return to the previous page. Click on the Next button to
continue to the next page. Click on the Cancel button to discard the changes made
and return to the main wireless page.
Step 2: After selecting Manual, the following page will appear. On this page to
user can view the wireless configuration of this router. The wireless clients should
configure their wireless settings to be identical to the settings displayed on this page
for a successful connection. This option is for wireless clients that can’t use the WPS
method to connect to this device.
Click on the Prev button to return to the previous page. Click on the Next button
to continue to the next page. Click on the Cancel button to discard the changes
made and return to the main wireless page. Click on the Wireless Status button to
navigate to the Status > Wireless page to view what wireless client are connected to
this device.
D-Link DIR-645 User Manual
72
Section 3 - Software Configuration
Advanced Network
This section contains settings which can change the way the router handles certain
types of traffic. We recommend that you not change any of these settings unless you
are already familiar with them or have been instructed to change them by one of our
support personnel.
UPnP
UPnP is short for Universal Plug and Play which is a networking architecture that provides compatibility among networking equipment, software, and peripherals. The device
is a UPnP enabled router, meaning it will work with other UPnP devices/software. If you do not want to use the UPnP functionality, it can be disabled by selecting “Disabled”.
The following parameters will be available for configuration:
Enable UPnP: Tick this option to enable the UPnP feature of the router.
WAN Ping
When you Enable WAN Ping response, you are causing the public WAN (Wide Area Network) IP address on the device to respond to ping commands sent by Internet users.
Pinging public WAN IP addresses is a common method used by hackers to test whether your WAN IP address is valid.
The following parameters will be available for configuration:
Enable WAN Ping Tick this option to enable the WAN Ping Response option
Response: of the router.
WAN Port Speed
This allows you to select the speed of the WAN interface of the router. Option to choose from are Auto 10/100/1000Mbps, 10Mbps, 100Mbps, or 1000Mbps.
The following parameters will be available for configuration:
WAN Port Speed: You may set the port speed of the Internet port to Auto
10/100/1000Mbps, 10Mbps, 100Mbps, or 1000Mbps.
Some older cable or DSL modems may require you to set
the port speed to 10Mbps.
D-Link DIR-645 User Manual
73
Section 3 - Software Configuration
Multicast Streams
This section enables the user to allow Multicast traffic to pass from the Internet to your network more efficiently.
The following parameters will be available for configuration:
Enable Multicast Enable this option if you are receiving video on demand type
Streams: of service from the Internet. The router uses the IGMP
protocol to support efficient multicasting transmission of identical content, such as multimedia, from a source to a number of recipients. This option
must be enabled if any applications on the LAN participate in a multicast group. If you have a multimedia LAN application that is not receiving content
as expected, try enabling this option.
EEE
The goal of Energy Efficient Ethernet (EEE) is to reduce Ethernet power consumption by 50 percent or more. Energy Efficient Ethernet (EEE), also known as IEEE 802.3az, is a
set of enhancements to the twisted-pair and backplane Ethernet networking standards that will allow for less power consumption during periods of low data activity.
The following parameters will be available for configuration:
Enable EEE: Tick this option to enable the Energy Efficient Ethernet (EEE)
feature.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
74
Section 3 - Software Configuration
DLNA Settings
DLNA (Digital Living Network Alliance) is the standard for the interoperability of
Network Media Devices (NMDs). The user can enjoy multi-media applications (music,
pictures and videos) on your network connected PC or media devices. If you agree to
share media with devices, any computer or device that connects to your network can
play your shared music, pictures and videos.
Note: The shared media may not be secure. Allowing any devices to stream is
recommended only on secure networks.
The following parameters will be available for configuration:
Name your media Enter the name of your media library here. This name will be
library: visible to all the DLNA players on the network.
Folder: Simply tick the root option, to use the root directory of
the storage device plugged into the USB port of the router.
To use a specific folder on the storage device, click on the
Browse button and navigate to the specific folder. Click on
the Apply button to choose the folder.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
75
Section 3 - Software Configuration
iTunes Server
The router features an iTunes Server. This server provides the ability to share music
and videos to computers on the local network running iTunes. If the server is enabled,
the router will be automatically detected by the iTunes program and the music and
videos contained in the specified directory will be available to stream over the network.
The following parameters will be available for configuration:
iTunes Server: Select to enable or disable the iTunes server.
Folder: Specifies the folder or directory that will be shared by the
iTunes server. Select root to share all files on all volumes,
or click Browse to select a specific folder.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
After enabling the iTunes server on the router, launch iTunes. In your iTunes utility, select the router and enter the iTunes server password if required.
D-Link DIR-645 User Manual
76
Section 3 - Software Configuration
Guest Zone
On this page, the user will be able to configure the Guest Zone, settings. The guest
zone provide a separate network zone for guest to access Internet.
The following parameters will be available for configuration:
Enable Guest Tick this option to enable the Guest Zone feature for the
Zone: frequency band 2.4GHz. Use the drop-down menu to
schedule the time that the Firewall rule will be enabled. The
schedule may be set to Always, which will allow the particular
service to always be enabled. Click the New Schedule button
to create your own times in the Schedules page.
Wireless Band: Displays the frequency band used.
Wireless Network The Service Set Identifier (SSID) is the name of your wireless
Name: network. Create a name using up to 32 characters. The SSID
is case-sensitive.
Enable Routing Tick this option to enable routing between guest zones.
Between Zones:
Security Mode: The security mode enables the user to configure wireless security for this wireless guest zone. For more information about wireless security, refer to
the Wireless Settings page.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
77
Section 3 - Software Configuration
IPv6 Firewall
On this page the user can configure the IPv6 firewall settings. The firewall settings
section is an advance feature that is used to allow or deny traffic from passing through
the device. It works in the same way as IP Filters with additional settings. You can
create more detailed rules for the device.
In the IPv6 Firewall Rules section the user can create, enable and disable IPv6
firewall rules used by this device. The following parameters will be available for
configuration:
Configure IPv6 This option defines the behavior of all the IPv6 firewall rules
Filtering: created. Option to choose from are ‘Turn IPv6 Filtering
OFF’, ‘Turn IPv6 Filtering ON and ALLOW rules
listed’, and ‘Turn IPv6 Filtering ON and DENY rules
listed’. Select the appropriate option used here.
Checkbox Tick this option to used the firewall rules created.
Name: Enter a custom firewall rule name here. This name is used
for identification.
Source Interface: Select the appropriate source interface used here.
Destination Select the appropriate destination interface used here.
Interface:
Schedule: Select a time schedule that will be applied to this rules here.
IP Address Enter the IPv6 address range used here.
Range:
Protocol: Select the protocol used for this rule here. Options to choose
from are ALL, TCP, UDP, and ICMP.
Port Range: Enter the port range used for this rule here.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
78
Section 3 - Software Configuration
IPv6 Routing
On this page the user can specify custom routes that determine how data is moved
around your IPv6 network.
The following parameters will be available for configuration:
Checkbox: To enable a route, check the box that is on the left side of
the route.
Name: Enter the IPv6 routing rule name used here.
Metric: Enter the metric value for this rule here.
Interface: Use the drop-down menu to specify if the IP packet must use
the WAN or LAN interface to transit out of the Router.
Destination IPv6: Enter the IPv6 address of the packets that will take this route.
Prefix Length: Enter the IPv6 address prefix length of the packets that will
take this route.
Gateway: Enter the next hop that will be taken if this route is used.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
79
Section 3 - Software Configuration
Tools Category
In this category the user will be able to configure features that are related to the router
itself. Features like the time settings, login accounts, firmware update and more.
The pages found in the Setup Category are:
Admin: This page will allow you to change the Administrator password and
configure the authentication settings. This window also allows you to enable Remote
Management, via the Internet.
Time: The Time window allows you to configure, update, and maintain the correct
time on the internal system clock.
Syslog: The Syslog options allow you to send log information to a System Log
Server.
Email Settings: The Email feature can be used to send the system log files and
router alert messages to your email address.
System: This section allows you to manage the router’s configuration settings,
reboot the router, and restore the router to the factory default settings. Restoring the
unit to the factory default settings will erase all settings, including any rules that you’ve created.
Firmware: Use the Firmware window to upgrade the firmware of the Router and install language packs. If you plan to install new firmware, make sure the firmware you want
to use is on the local hard drive of the computer. If you want to install a new language pack, make sure that you have the language pack available. Please check the support site
for firmware updates. You can download firmware upgrades to your hard drive from the support site.
Dynamic DNS: The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have purchased (www.whateveryournameis.
com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your
friends can enter in your domain name to connect to your server no matter what your IP address is.
System Check: This useful diagnostic utility can be used to check if a computer is on the Internet. It sends ping packets and listens for replies from the specific host.
Schedules: Schedules can be created for use with enforcing rules.
D-Link DIR-645 User Manual
80
Section 3 - Software Configuration
Admin
This page will allow you to change the Administrator password and configure the
authentication settings. This window also allows you to enable Remote Management,
via the Internet. For security reasons, it is recommended that you change the password
for the Admin and User accounts. Be sure to write down the new password to avoid
having to reset the router in case they are forgotten.
In the Admin Password section, the user can change the Administrator login
password used for this device.
The following parameters will be available for configuration:
Password: Enter the new login password used here.
Verify Password: Re-enter the new login password here.
In the User Password section, the user can change the User login password used
for this device.
The following parameters will be available for configuration:
Password: Enter the new login password used here.
Verify Password: Re-enter the new login password here.
In the System Name section, the user can change the gateway name used for this
device.
The following parameters will be available for configuration:
Gateway Name: Enter the router gateway name used here.
The following parameters will be available for configuration:
Enable Graphical Tick this option to enable the graphical image confirmation
Authentication: when the user login to the web configuration.
Enable Remote Tick this option to enable remote management. This option
Management: will enable the router to be accessible from the Internet port.
D-Link DIR-645 User Manual
81
Section 3 - Software Configuration
Remote Admin Enter the remote administration port number used here. Sometimes services like an internal web server will occupy the port number 80. In this option
Port: the user can change the remote administration port to 8080 for example.
Remote Admin Select the appropriate remote admin inbound filter behavior here. Options to choose from are Allow All and Deny All.
Inbound Filter:
Details: Enter the remote admin inbound filter detail description used here.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
82
Section 3 - Software Configuration
Time
The Time window allows you to configure, update, and maintain the correct time on
the internal system clock. From this section you can set the time zone that you are
in and set the Time Server. Daylight Saving can also be configured to automatically
adjust the time when needed.
Time and Date Configuration
Here the user can configure the time zone as well as the daylight savings settings used for this router.
The following parameters will be available for configuration:
Time: Here will be displayed the current time configuration running
on this device.
Time Zone: Select the appropriate time zone used on this device here.
Enable Daylight Check this box if the country your are located in uses
Saving: Daylight Saving time.
Daylight Saving Select the daylight savings offset used here.
Offset:
Daylight Saving Select the start date and end date for daylight saving time.
Dates:
Automatic Time and Date Configuration
Here the user can configure whether this router will automatically synchronize it’s time and date with a public time server.
The following parameters will be available for configuration:
Automatically NTP is short for Network Time Protocol. NTP synchronizes
synchronize: computer clock times in a network of computers. Tick this
option to enable automatic time and date synchronizing.
NTP Server Used: Select the appropriate time server used here. The interval at
which the router will communicate with the NTP server is
set to 7 days.
Update Now: After selecting the appropriate time server and enabling the automatic synchronization option, click on this button to update the current time and date
of the router.
D-Link DIR-645 User Manual
83
Section 3 - Software Configuration
Set the Time and Date Manually
Here the user can configure the time and date values, used by this router, manually. Here the user can also synchronize the router’s time with the configuration computer’s time.
The following parameters will be available for configuration:
Set Manually: Here the user can manually configure the date and time used
by this device. Options to configure are Year, Month, Day,
Hour, Minute, and Second.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
Syslog
The Syslog options allow you to send log information to a System Log Server.
The following parameters will be available for configuration:
Enable Logging Tick this option to enable the Syslog feature.
To SysLog Server:
Syslog Server IP Enter the Syslog Server IP address used here.
Address:
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
84
Section 3 - Software Configuration
Email Settings
The Email feature can be used to send the system log files and router alert messages
to your email address.
Email Notification
When this option is enabled, router activity logs or firmware upgrade notifications can
be emailed to a designated email address.
The following parameters will be available for configuration:
Enable Email Tick this option to enable the Email notification feature.
Notification:
Email Settings
Here this user can manually enter the email settings required to enable the email
notification feature.
The following parameters will be available for configuration:
From Email This email address will appear as the sender when you
Address: receive a log file or firmware upgrade notification via email.
To Email Address: Enter the email address where you want the email sent.
Email Subject: Enter the text that you want to appear in the subject line of
the e-mail that is sent.
SMTP Server Enter the SMTP server address for sending email. If your SMTP server requires authentication, select this option.
Address:
SMTP Server Enter the SMTP server port number used for sending email.
Port:
Enable Tick this option if the SMTP server requires authentication for sending mail.
Authentication:
Account Name: Enter your account for sending email.
Password: Enter the password associated with the account.
Verify Password: Re-enter the password associated with the account here.
Send Mail Now: Click this button to send a test email from the Router to verify that the email settings have been configured correctly.
D-Link DIR-645 User Manual
85
Section 3 - Software Configuration
Email Log When Full or on Schedule
Normally emails are sent at the starting and ending time defined in the schedule.
However, rebooting the router during the schedule period will cause additional emails
to be sent.
The following parameters will be available for configuration:
On Log Full: Select this option if you want logs to be sent by email when
the log is full.
On Schedule: Select this option if you want logs to be sent by email according to a schedule.
Schedule: If you selected the ‘On Schedule’ option, select one of the defined schedule rules. If you do not see the schedule you need in the list of schedules,
go to the Tools > Schedules screen and create a new schedule.
Detail: Enter a detailed description here.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
86
Section 3 - Software Configuration
System
This section allows you to manage the router’s configuration settings, reboot the
router, and restore the router to the factory default settings. Restoring the unit to the
factory default settings will erase all settings, including any rules that you’ve created.
The following parameters will be available for configuration:
Save Settings To Use this option to save the current router configuration
Local Hard Drive: settings to a file on the hard disk of the computer you are
using. First, click the Save button. A file dialog will appear,
allowing you to select a location and file name for the
settings.
Load Settings Use this option to load previously saved router configuration
From Local Hard settings. First, use the Browse option to find a previously
Drive: saved file of configuration settings. Then, click the Restore
Configuration From File button below to transfer those
settings to the router.
Restore To This option will restore all configuration settings back to the
Factory Default settings that were in effect at the time the router was shipped
Settings: from the factory. Any settings that have not been saved will
be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above.
Reboot The Click to reboot the router.
Device:
Clear Language If you previously installed a language pack and want to revert all the menus on the Router interface back to the default language settings, click the
Pack: Clear button.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
87
Section 3 - Software Configuration
Firmware
Use the Firmware window to upgrade the firmware of the Router and install language
packs. If you plan to install new firmware, make sure the firmware you want to use is
on the local hard drive of the computer. If you want to install a new language pack,
make sure that you have the language pack available. Please check the support site
for firmware updates. You can download firmware upgrades to your hard drive from
the support site.
In the Firmware Information section the user can view the Current Firmware
Version number running on this device, the Current Firmware Date of this same
firmware version running on this device, and a button to click that will Check Online
Now for Latest Firmware Version.
In the Firmware Upgrade section the user can physically upgrade the firmware of
this device clicking on the Browse button and navigating to the firmware file, saved
on the local hard drive. After locating the file, click on the Upload button to initiate
the firmware upgrade.
Note: Some firmware upgrades will reset the configuration, of the device, to factory
defaults. Be sure to save the current configuration first before any firmware update.
In the Language Pack Upgrade section, the user can change the router’s language
pack by clicking on the Browse button and navigating to the language pack,
downloaded to the computer. After navigating to the language pack file, click on the
Upload button to initiate the language pack upload and configuration. Always keep a
close lookout on the local vendor’s website for new firmware upgrades and language
packs.
Note: Always update the firmware or language packs for this device using the wired connection. Never upgrade using a wireless connection.
D-Link DIR-645 User Manual
88
Section 3 - Software Configuration
Dynamic DNS
The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using
a domain name that you have purchased (www.whateveryournameis.com) with your
dynamically assigned IP address. Most broadband Internet Service Providers assign
dynamic (changing) IP addresses. Using a DDNS service provider, your friends can
enter in your domain name to connect to your server no matter what your IP address
is.
The following parameters will be available for configuration:
Enable Dynamic Dynamic Domain Name System is a method of keeping a
DNS: domain name linked to a changing IP Address. Check the
box to enable DDNS.
Server Address: Choose your DDNS provider from the drop down menu.
Host Name: Enter the Host Name that you registered with your DDNS
service provider.
Username or Key: Enter the Username or Key for your DDNS account.
Password or Key: Enter the Password or Key for your DDNS account.
Verify Password Re-enter the Password or Key for your DDNS account.
or Key:
Timeout: Enter the timeout value used for the DDNS account here.
Status: Displays the DDNS connection status here.
The following parameters will be available for configuration:
Enable: Tick this option to enable the Dynamic DNS feature for IPv6
hosts.
IPv6 Address: Enter the IPv6 Address used here. Alternatively, the user can
select the Computer Name for the drop-down list and click
on the << button to add it the IPv6 Address field.
Host Name: Enter the IPv6 host name used for the DDNS account here.
Click on the Save button to add the IPv6 host to the IPv6 Dynamic DNS List.
Click on the Clear button to clear the information entered in the fields.
D-Link DIR-645 User Manual
89
Section 3 - Software Configuration
In the IPv6 Dynamic DNS List section, a list of IPv6 hosts will be displayed. Tick
the Enable checkbox to make the host active. To edit a specific entry click on the
icon. To remove a specific entry, click on the
icon.
Click on the Save Settings button to accept the changes made.
Click on the Don’t Save Settings button to discard the changes made.
D-Link DIR-645 User Manual
90
Section 3 - Software Configuration
System Check
This useful diagnostic utility can be used to check if a computer is on the Internet. It
sends ping packets and listens for replies from the specific host.
In the Ping Test section the user can test the Internet connectivity by entering in a
host name or the IP address that you want to Ping and click on the Ping button. The
status of your Ping attempt will be displayed in the Ping Result box.
In the IPv6 Ping Test section the user can test the Internet connectivity by entering in
a host name or the IPv6 address that you want to Ping and click on the Ping button.
The status of your Ping attempt will be displayed in the Ping Result box.
In the Ping Result section the results of the attempted ping will be displayed.
D-Link DIR-645 User Manual
91
Section 3 - Software Configuration
Schedules
Schedules can be created for use with enforcing rules. For example, if you want to
restrict web access to Mon-Fri from 3pm to 8pm, you could create a schedule selecting
Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm.
The following parameters will be available for configuration:
Name: Enter the custom name for the new schedule rule here. This
name is used for identification.
Day(s): To use every day in the week for this rule, select the All
Week option. To use only selected days for this rule, select
the Select Day(s) option and tick the appropriate days
used for this rule.
All Day - 24 hrs: To enable this rule to run 24 hours instead of only a certain
part of the day, tick this option.
Time Format: Select the appropriate time format to use here.
Start Time: If the All Day option is not selected, the user can enter the
starting time here.
End Time: If the All Day option is not selected, the user can enter the
ending time here.
Click on the Add button to add this new rule to the schedule rules list.
Click on the Cancel button to discard the information and cancel the rule addition.
In the Schedule Rules List section, the user can view the available schedule rules created. To edit an existing rule, click on the
existing rule, click on the
icon of the specific entry.
D-Link DIR-645 User Manual
icon of the specific entry, To remove an
92
Section 3 - Software Configuration
Status Category
In this category the user will be able to view information regarding the configuration
and functionality of this device. Displays like WAN, LAN and Wireless configurations,
System, Firewall and Router logs, and more.
The pages found in the Setup Category are:
Device Info: This page displays the current information for the router. It will display
the LAN, WAN (Internet), and Wireless information. If your Internet connection is
set up for a Dynamic IP address then a Release button and a Renew button will be
displayed. Use Release to disconnect from your ISP and use Renew to connect to
your ISP.
Logs: The router automatically logs (records) events of possible interest in it’s
internal memory. If there isn’t enough internal memory for all events, logs of older
events are deleted but logs of the latest events are retained. The Logs option allows
you to view the router logs. You can define what types of events you want to view and
the level of the events to view. This router also has external Syslog Server support so
you can send the log files to a computer on your network that is running a Syslog utility.
Statistics: The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the router on both the WAN, LAN ports and the
802.11n/g (2.4GHz) wireless band. The traffic counter will reset if the device is rebooted.
Internet Sessions: The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program
or application on a LAN-side computer and a program or application on a WAN-side computer.
Wireless: The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected
wireless clients.
IPv6: The IPv6 page displays a summary of the Router’s IPv6 settings and lists the IPv6 address and host name of any IPv6 clients.
IPv6 Routing: This page displays IPv6 routing details configured for your router.
D-Link DIR-645 User Manual
93
Section 3 - Software Configuration
Device Info
This page displays the current information for the router. It will display the LAN,
WAN (Internet), and Wireless information. If your Internet connection is set up for a
Dynamic IP address then a Release button and a Renew button will be displayed. Use
Release to disconnect from your ISP and use Renew to connect to your ISP.
In the General section, information about the time and firmware is being displayed.
In the WAN section, information about the Internet connection is being displayed.
In the LAN section, information about the Local Area Network configuration is being
displayed.
D-Link DIR-645 User Manual
94
Section 3 - Software Configuration
In the Wireless LAN section, information about the Wireless Local Area Network
configuration is being displayed.
In the LAN Computers section, a list of actively connected nodes are being displayed.
In the IGMP Multicast Memberships section, a list of Multicast Group Addresses
are being displayed.
D-Link DIR-645 User Manual
95
Section 3 - Software Configuration
Logs
The router automatically logs (records) events of possible interest in it’s internal
memory. If there isn’t enough internal memory for all events, logs of older events are
deleted but logs of the latest events are retained. The Logs option allows you to view
the router logs. You can define what types of events you want to view and the level
of the events to view. This router also has external Syslog Server support so you can
send the log files to a computer on your network that is running a Syslog utility.
In the Save Log File section, the user can click on the Save button save the Router’s
log entries to a log file on your computer.
The following parameters will be available for configuration:
Log Type: Use the radio buttons to select the types of messages
that you want to display from the log. System, Firewall &
Security, and Router Status messages can be selected.
Log Level: There are three levels of message importance: Critical,
Warning, and Information. Select the levels that you want
displayed in the log.
The following parameters will be available for configuration:
First - Last Page: Use these buttons to navigate to the first or last page of the
router logs.
Previous - Next: Use these buttons to navigate to the next or previous page
of the router logs.
Clear: Click on this button to clear all the contents from the log.
Link to Email Log Click this button to open the Email Settings screen so that
Settings: you can change the Email configuration for sending logs.
D-Link DIR-645 User Manual
96
Section 3 - Software Configuration
Statistics
The screen below displays the Traffic Statistics. Here you can view the amount of
packets that pass through the router on both the WAN, LAN ports and the 802.11n/g
(2.4GHz) wireless band. The traffic counter will reset if the device is rebooted.
In the LAN Statistics section, the user can view the traffic statistics that occurred on
the LAN interface. Information that is displayed includes the packets sent and received,
packets dropped, collisions that occurred, and error packets sent and received.
In the WAN Statistics section, the user can view the traffic statistics that occurred
on the WAN interface. Information that is displayed includes the packets sent and
received, packets dropped, collisions that occurred, and error packets sent and
received.
In the Wireless Statistics section, the user can view the traffic statistics that
occurred on the Wireless interface. Information that is displayed includes the packets
sent and received, packets dropped, collisions that occurred, and error packets sent
and received.
Click on the Refresh Statistics button to refresh the display page.
Click on the Reset Statistics button to clear all the statistic information for all the
fields displayed.
D-Link DIR-645 User Manual
97
Section 3 - Software Configuration
Internet Sessions
The Internet Sessions page displays full details of active Internet sessions through
your router. An Internet session is a conversation between a program or application on
a LAN-side computer and a program or application on a WAN-side computer.
In the section all the active Internet sessions will be displayed.
Wireless
The wireless client table displays a list of current connected wireless clients. This
table also displays the connection time and MAC address of the connected wireless
clients.
In the Number of Wireless Clients - 2.4GHz Band section a list of 2.4GHz active
wireless clients will be displayed.
D-Link DIR-645 User Manual
98
Section 3 - Software Configuration
IPv6
The IPv6 page displays a summary of the Router’s IPv6 settings and lists the IPv6
address and host name of any IPv6 clients.
In the IPv6 Connection Information section, more information about the IPv6
connection will be displayed. Information like the connection type, gateway address,
Link-Local address, DNS Servers, and more.
In the LAN IPv6 Computers section, a list of actively connected LAN IPv6 computers
will be displayed.
IPv6 Routing
This page displays IPv6 routing details configured for your router.
D-Link DIR-645 User Manual
99
Section 3 - Software Configuration
Support Category
In this category the user will have access to a portal of information regarding each and
every page that exists on this device. This information gives the basic description of
parameter and uses for the pages.
D-Link DIR-645 User Manual
100
Section 4 - Knowledge Base
Knowledge Base
Wireless Basics
Wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access
wireless networks. Strictly adhering to the IEEE standard, the wireless family of products will allow you to securely access the data you want, when and where you want it. You
will be able to enjoy the freedom that wireless networking delivers.
A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly
in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work
and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users.
Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet
adapter cards.
Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection
supplied through the wired LAN. A Wireless Router is a device used to provide this link.
What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have
the freedom to connect computers anywhere in your home or office network.
How does Wireless work?
Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you
can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networks Wireless
Local Area Network (WLAN), and Wireless Personal Area Network (WPAN).
Wireless Local Area Network (WLAN)
In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows
it to transmit data back and forth over radio signals. With an indoor access point as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the
signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other
outdoor venues.
D-Link DIR-645 User Manual
101
Section 4 - Knowledge Base
Wireless Personal Area Network (WPAN)
Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and
wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs,
headphones, laptops, speakers, and other devices that operate on batteries.
Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, we have a wireless solution for it.
Home
• Gives everyone at home broadband access
• Surf the web, check email, instant message, etc.
• Gets rid of the cables around the house
• Simple and easy to use
Small Office and Home Office
• Stay on top of everything at home as you would at office
• Remotely access your office network from home
• Share Internet connection and printer with multiple computers
• No need to dedicate office space
Where is wireless used?
Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s becoming so popular that more and more public facilities
now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.
Using a Wireless Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries,
Restaurants, and Convention Centers.
Wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing where to start. That’s why we’ve put together a few setup steps
and tips to help you through the process of setting up a wireless network.
D-Link DIR-645 User Manual
102
Section 4 - Knowledge Base
Tips
Here are a few things to keep in mind, when you install a wireless network.
Centralize your router or Access Point
Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in
the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range.
Eliminate Interference
Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any
interference that the appliances might cause since they operate on same frequency.
Security
Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router.
Refer to product manual for detail information on how to set it up.
Wireless Modes
There are basically two modes of networking:
• Infrastructure – All wireless clients will connect to an access point or wireless router.
• Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more wireless
network Cardbus adapters.
An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point.
An Ad-Hoc network contains only clients, such as laptops with wireless Cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate.
D-Link DIR-645 User Manual
103
Section 4 - Knowledge Base
Wireless Security
This section will show you the different levels of security you can use to protect your data from intruders. The router offers wireless security options like WPA/WPA2 PSK/EAP.
What is WPA?
WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).
The 2 major improvements over WEP:
• Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and, by adding an integrity-checking
feature, ensures that the keys haven’t been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP.
• User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a
computer’s hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure
that only authorized network users can access the network.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The
password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point.
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that
only authorized network users can access the network.
D-Link DIR-645 User Manual
104
Section 4 - Knowledge Base
Networking Basics
Check your IP address
After you install your new network or wireless adapter, by default, the TCP/IP settings
should be set to obtain an IP address from a DHCP server (i.e. wireless router)
automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista®
users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and the default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation, security settings, and the
settings on your router. Some firewall software programs may block a DHCP request
on newly installed adapters.
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP
address, please follow the steps below:
Step 1
• Windows® 7 - Click on Start > Control Panel > Network and Internet > Network
and Sharing Center > Change Adapter Setting.
• Windows Vista® - Click on Start > Control Panel > Network and Internet >
Network and Sharing Center > Manage Network Connections.
• Windows® XP - Click on Start > Control Panel > Network Connections.
• Windows® 2000 - From the desktop, right-click My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your network adapter and
select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
D-Link DIR-645 User Manual
105
Section 4 - Knowledge Base
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.
Example:
If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use
on the network.
Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your
router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DIR-645 User Manual
106
Section 4 - Knowledge Base
Connect to a Wireless Network
Using Window 7
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing
network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
2. The utility will display any available wireless networks in your area.
3. Highlight the wireless network (SSID) you would like to connect to and click the
Connect button.
If you get a good signal but cannot access the Internet, check your TCP/IP settings
for your wireless adapter. Refer to the Networking Basics section in this manual for
more information.
D-Link DIR-645 User Manual
107
Section 4 - Knowledge Base
4. The following window appears while your computer tries to connect to the router.
5. Enter the same security key or passphrase that is on your router and click Connect.
You can also connect by pushing the WPS button on the router.
It may take 20-30 seconds to connect to the wireless network. If the connection fails,
please verify that the security settings are correct. The key or passphrase must be
exactly the same as on the wireless router.
D-Link DIR-645 User Manual
108
Section 4 - Knowledge Base
Using Window 7 and WPS
The WPS feature of the router can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature of the router:
1. Click the Start button and select Computer from the Start menu.
2. Click the Network option.
3. Double-click the Router.
4. Input the WPS PIN number and click Next.
D-Link DIR-645 User Manual
109
Section 4 - Knowledge Base
5. Type a name to identify the network.
6. To configure advanced settings, click on the drop-down icon.
Click Next to continue.
D-Link DIR-645 User Manual
110
Section 4 - Knowledge Base
7. The following window appears while the Router is being configured.
Wait for the configuration to complete.
8. The following window informs you that WPS on the Router has been setup
successfully.
Make a note of the security key as you may need to provide this security key if adding
an older wireless device to the network in the future.
9. Click Close to complete WPS setup.
D-Link DIR-645 User Manual
111
Section 4 - Knowledge Base
Using Window Vista
Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter
for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows Vista® utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the center of the bubble
to access the utility or right-click on the wireless computer icon in your system tray
(lower‑right corner next to the time).
Select Connect to a network.
The utility will display any available wireless networks in your area.
Click on your wireless network (displayed using the SSID) and click the Connect
button.
If you get a good signal but cannot access the Internet, check you TCP/IP settings for
your wireless adapter. Refer to the Networking Basics section in this manual for more
information.
It is recommended to enable wireless security (WPA/WPA2) on your wireless router
or access point before configuring your wireless adapter. If you are joining an existing
network, you will need to know the security key or passphrase being used.
1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer
icon in your system tray (lower right corner of screen). Select Connect to a network.
2. Highlight the wireless network (SSID) you would like to connect to and click
Connect.
3. Enter the same security key or passphrase that is on your router and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the connection fails,
please verify that the security settings are correct. The key or passphrase must be
exactly the same as on the wireless router.
D-Link DIR-645 User Manual
112
Section 4 - Knowledge Base
Using Window XP
Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another company’s
utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option
similar to the Windows® XP utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the center of the bubble
to access the utility or right-click on the wireless computer icon in your system tray
(lower right corner next to the time). Select View Available Wireless Networks.
The utility will display any available wireless networks in your area. Click on a network
(displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check you TCP/ IP settings for
your wireless adapter. Refer to the Networking Basics section in this manual for more
information.
It is recommended to enable WPA on your wireless router or access point before
configuring your wireless adapter. If you are joining an existing network, you will need
to know the WPA key being used.
1. Open the Windows XP Wireless Utility by right-clicking on the wireless computer
icon in your system tray (lower-right corner of screen). Select View Available Wireless
Networks.
2. Highlight the wireless network (SSID) you would like to connect to and click
Connect.
3. The Wireless Network Connection box will appear. Enter the WPA-PSK passphrase
and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the connection fails,
please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must
be exactly the same as on the wireless router.
D-Link DIR-645 User Manual
113
Section 5 - Troubleshooting
Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of the router. Read the following descriptions if you are having problems. The
examples below are illustrated in Windows® XP. If you have a different operating system, the screen captures on your computer will look similar to the following examples.
Why can’t I access the web-based configuration utility?
When entering the IP address of the router (192.168.0.1 for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the
utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
Make sure you have an updated Java-enabled web browser. We recommend the following:
• Microsoft Internet Explorer® 6.0 and higher
• Mozilla Firefox 3.0 and higher
• Google™ Chrome 2.0 and higher
• Apple Safari 3.0 and higher
Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the
device if possible. If the computer is turned off, the link light may not be on.
Disable any Internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows® XP firewall
may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it.
Configure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
• Close your web browser (if open) and open it.
Access the web management. Open your web browser and enter the IP address of your router in the address bar. This should open the login page for your web management.
If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you
have multiple computers, try connecting using a different computer.
D-Link DIR-645 User Manual
114
Section 5 - Troubleshooting
What can I do if I forgot my password?
If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults.
To reset the router, locate the reset button (hole) on the bottom panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release
the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username
is admin and leave the password box empty.
Why can’t I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments
of ten (Ex. 1492, 1482, 1472, etc).
To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be another computer, or a URL.
• Click on Start and then click Run.
• Windows® 95, 98, and Me users type in command (Windows® NT, 2000, and XP users type in cmd) and press Enter (or click OK).
• Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472
You should start at 1472 and work your way down by 10 each time. Once you get a
reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the
value to account for the various TCP/IP headers. For example, lets say that 1452 was
the proper value, the actual MTU size would be 1480, which is the optimum for the
network we’re working with (1452+28=1480).
Once you find your MTU, you can now configure your router with the proper MTU
size.
To change the MTU rate on your router follow the steps below:
• Open your browser, enter the IP address of your router (192.168.0.1) and click
OK.
• Enter your username (admin) and password (blank by default). Click OK to enter
the web configuration page for the device.
• Click on Setup and then click Manual Configure.
• To change the MTU enter the number in the MTU field and click Save Settings to save your settings.
• Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten.
D-Link DIR-645 User Manual
115
Appendix B - Warranty
Warranty
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty:
• Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor.
• Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military
Installations, or addresses with an APO or FPO.
Limited Warranty:
D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects in workmanship and materials under normal
use from the date of original retail purchase of the product, for the period set forth below (“Warranty Period”), except as otherwise stated herein.
• Hardware (excluding power supplies): One (1) year
• Free Technical Support - Basic Installation: Ninety (90) days
The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at
D-Link’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual purchase price paid. Any
repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model
or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially
equivalent (or superior) in all material respects to the defective Hardware. Repaired or replacement hardware will be warranted for the remainder of the original Warranty
Period or ninety (90) days, whichever is longer, and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if D-Link determines
that it is not practical to repair or replace the defective Hardware, the actual price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon
return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of
D-Link upon replacement or refund.
Limited Software Warranty:
D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional specifications for the Software, as set forth
in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90) days (“Software Warranty Period”), provided that the
Software is properly installed on approved hardware and operated as contemplated in its documentation. D-Link further warrants that, during the Software Warranty Period,
the magnetic media on which D-Link delivers the Software will be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and
its suppliers under this Limited Warranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms
to D-Link’s functional specifications for the Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed
by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the
Software. Replacement Software will be warranted for the remainder of the original Warranty Period and is subject to the same limitations and exclusions. If a material nonconformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the
D-Link DIR-645 User Manual
117
Appendix B - Warranty
original licensee for the non-conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is first returned to D-Link.
The license granted respecting any Software for which a refund is given automatically terminates.
Non-Applicability of Warranty:
The Limited Warranty provided hereunder for Hardware and Software portions of D-Link’s products will not be applied to and does not cover any refurbished product and
any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty
obligation pertaining to the product and in that case, the product is being sold “As-Is” without any warranty whatsoever including, without limitation, the Limited Warranty as
described herein, notwithstanding anything stated herein to the contrary.
Submitting A Claim:
The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within
warranty, the customer shall submit a claim to D-Link as outlined below:
• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow
D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.
• The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the customer in resolving any suspected
defects with the product. If the product is considered defective, the customer must obtain a Return Material Authorization (“RMA”) number by completing the RMA form
and entering the assigned Case ID Number at https://rma.dlink.com/.
• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged
in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link
will only replace the defective portion of the product and will not ship back any accessories.• The customer is responsible for all in-bound shipping charges to D-Link.
No Cash on Delivery (“COD”) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the
customer and shipped to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost
in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link. Return shipping
charges shall be prepaid by D-Link if you use an address in the United States, otherwise we will ship the product to you freight collect. Expedited shipping is available
upon request and provided shipping charges are prepaid by the customer. D-Link may reject or return any product that is not packaged and shipped in strict compliance
with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable
handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link
not to be defective or non-conforming.
What Is Not Covered:
The Limited Warranty provided herein by D-Link does not cover:
Products that, in D-Link’s judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable
care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or
D-Link DIR-645 User Manual
118
Appendix B - Warranty
removed; Initial installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for the product,
and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other
products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which
D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product.
While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D-Link Service Office. Improper
or incorrectly performed maintenance or repair voids this Limited Warranty.
Disclaimer of Other Warranties:
EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING,
WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL
BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY
PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.
Limitation of Liability:
TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE
THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE
OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION
OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF
THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE
DEFECTIVE OR NONCONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT
COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR
REMEDIES, EXPRESS, IMPLIED OR STATUTORY.
Governing Law:
This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This Limited Warranty provides specific legal rights and you
may also have other rights which vary from state to state.
D-Link DIR-645 User Manual
119
Appendix B - Warranty
Trademarks:
D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective owners.
Copyright Statement:
No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation,
transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any
amendments thereto. Contents are subject to change without prior notice.
Copyright ©2007 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.
CE Mark Warning:
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Federal Communication Commission (FCC) Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
D-Link DIR-645 User Manual
120
Appendix B - Warranty
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended
destination. The firmware setting is not accessible by the end user.
Industry Canada statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
IMPORTANT NOTE:
Radiation Exposure Statement:
The product comply with the US/Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this
manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such
function is available.
NOTE IMPORTANTE:
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un
minimum de 20 cm de distance entre la source de rayonnement et votre corps.
NOTE IMPORTANTE: (Pour l’utilisation des appareils portables)
Déclaration d’exposition aux radiations:
Le produit est conforme aux limites d’exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé.
Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l’appareil peut être conservé aussi loin que
possible du corps de l’utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible.
D-Link DIR-645 User Manual
121
Appendix B - Warranty
以下警語適用台灣地區
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
D-Link DIR-645 User Manual
122
Appendix C - Contacting Technical Support
Contacting Technical Support
U.S. and Canadian customers can contact D-Link technical support through our web site or by phone.
Before you contact technical support, please have the following ready:
• Model number of the product (e.g. DIR-645)
• Hardware Revision (located on the label on the bottom of the switch (e.g. rev A1))
• Serial Number (s/n number located on the label on the bottom of the device).
You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.
For customers within the United States:
For customers within Canada:
Phone Support:
(877) 453-5465
Phone Support:
(800) 361-5265
Internet Support:
http://support.dlink.com
Internet Support:
http://support.dlink.com
D-Link DIR-645 User Manual
123
Appendix D - Registration
Registration
Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
Version 1.00
2011/05/16
D-Link DIR-645 User Manual
124
Industry Canada statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
IMPORTANT NOTE:
Radiation Exposure Statement:
The product comply with the US/Canada portable RF exposure limit set forth for an uncontrolled environment and are
safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower output power if such function is available.
NOTE IMPORTANTE:
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et
votre corps.
NOTE IMPORTANTE: (Pour l'utilisation des appareils portables)
Déclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies
pour un environnement non contrôlé.
Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être
augmentée si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé
sur la puissance de sortie la plus faible si une telle fonction est disponible.
以下警語適用台灣地區
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功
率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並
改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電
機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Tagged PDF                      : No
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Title                           : D-Link DIR-645 User Manual
Creator                         : Nick Schuster
Create Date                     : 2011:05:16 16:22:36+08:00
Metadata Date                   : 2011:06:13 10:28:48+08:00
Modify Date                     : 2011:06:13 10:28:48+08:00
Creator Tool                    : Adobe InDesign CS4 (6.0.6)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 6201 bytes, use -b option to extract)
Instance ID                     : uuid:87762d7f-2545-4c5c-bede-80a2e3016097
Original Document ID            : xmp.did:B79E358BAED2DF118954AF1B607B691D
Document ID                     : xmp.did:23090D30A659E011A56FAFE5FA2EE62A
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:B79E358BAED2DF118954AF1B607B691D, xmp.iid:B89E358BAED2DF118954AF1B607B691D, xmp.iid:B99E358BAED2DF118954AF1B607B691D, xmp.iid:BA9E358BAED2DF118954AF1B607B691D, xmp.iid:0B905A46E5D4DF11A583DE7F4A12894F, xmp.iid:CF4633D2DDD5DF119C49EB8EFC45CD57, xmp.iid:7B4ABD4BB1D6DF11A4DEE3F4EDACDAB2, xmp.iid:75E4514061D7DF119443B21F6EF6A1D9, xmp.iid:76E4514061D7DF119443B21F6EF6A1D9, xmp.iid:77E4514061D7DF119443B21F6EF6A1D9, xmp.iid:78E4514061D7DF119443B21F6EF6A1D9, xmp.iid:79E4514061D7DF119443B21F6EF6A1D9, xmp.iid:7AE4514061D7DF119443B21F6EF6A1D9, xmp.iid:7BE4514061D7DF119443B21F6EF6A1D9, xmp.iid:7CE4514061D7DF119443B21F6EF6A1D9, xmp.iid:7DE4514061D7DF119443B21F6EF6A1D9, xmp.iid:7EE4514061D7DF119443B21F6EF6A1D9, xmp.iid:534C8A5E6AD7DF119443B21F6EF6A1D9, xmp.iid:554C8A5E6AD7DF119443B21F6EF6A1D9, xmp.iid:8AFBCF34F7D7DF119E848CF1A3399EF1, xmp.iid:8BFBCF34F7D7DF119E848CF1A3399EF1, xmp.iid:8CFBCF34F7D7DF119E848CF1A3399EF1, xmp.iid:45825A8B46DBDF11A3B2B900E8B07053, xmp.iid:4B825A8B46DBDF11A3B2B900E8B07053, xmp.iid:1D1B86906727E0119B8AC16841B758D3, xmp.iid:1E1B86906727E0119B8AC16841B758D3, xmp.iid:1F1B86906727E0119B8AC16841B758D3, xmp.iid:201B86906727E0119B8AC16841B758D3, xmp.iid:211B86906727E0119B8AC16841B758D3, xmp.iid:221B86906727E0119B8AC16841B758D3, xmp.iid:B5F8192F2328E011B556E77B868DE0EC, xmp.iid:B6F8192F2328E011B556E77B868DE0EC, xmp.iid:5FB7AB34FA28E011A9B2C6FCCBB7EAC0, xmp.iid:60B7AB34FA28E011A9B2C6FCCBB7EAC0, xmp.iid:197D4055A52AE01183C7BF35E12C43BD, xmp.iid:1A7D4055A52AE01183C7BF35E12C43BD, xmp.iid:1B7D4055A52AE01183C7BF35E12C43BD, xmp.iid:1C7D4055A52AE01183C7BF35E12C43BD, xmp.iid:1D7D4055A52AE01183C7BF35E12C43BD, xmp.iid:17E769A5B62DE0118D0684D3DF301F99, xmp.iid:18E769A5B62DE0118D0684D3DF301F99, xmp.iid:19E769A5B62DE0118D0684D3DF301F99, xmp.iid:1AE769A5B62DE0118D0684D3DF301F99, xmp.iid:1BE769A5B62DE0118D0684D3DF301F99, xmp.iid:BF19A2A13333E0118287B1764D9B54AE, xmp.iid:C019A2A13333E0118287B1764D9B54AE, xmp.iid:C119A2A13333E0118287B1764D9B54AE, xmp.iid:C219A2A13333E0118287B1764D9B54AE, xmp.iid:C319A2A13333E0118287B1764D9B54AE, xmp.iid:C419A2A13333E0118287B1764D9B54AE, xmp.iid:C519A2A13333E0118287B1764D9B54AE, xmp.iid:C619A2A13333E0118287B1764D9B54AE, xmp.iid:C719A2A13333E0118287B1764D9B54AE, xmp.iid:C819A2A13333E0118287B1764D9B54AE, xmp.iid:3A3B95E56333E0118287B1764D9B54AE, xmp.iid:3B3B95E56333E0118287B1764D9B54AE, xmp.iid:3C3B95E56333E0118287B1764D9B54AE, xmp.iid:3D3B95E56333E0118287B1764D9B54AE, xmp.iid:3E3B95E56333E0118287B1764D9B54AE, xmp.iid:3F3B95E56333E0118287B1764D9B54AE, xmp.iid:7F6B770EE933E011B44B97BCDB31A4BD, xmp.iid:806B770EE933E011B44B97BCDB31A4BD, xmp.iid:816B770EE933E011B44B97BCDB31A4BD, xmp.iid:826B770EE933E011B44B97BCDB31A4BD, xmp.iid:836B770EE933E011B44B97BCDB31A4BD, xmp.iid:846B770EE933E011B44B97BCDB31A4BD, xmp.iid:856B770EE933E011B44B97BCDB31A4BD, xmp.iid:866B770EE933E011B44B97BCDB31A4BD, xmp.iid:CD9B74438735E011A41EB7EFBDF8B1CB, xmp.iid:CE9B74438735E011A41EB7EFBDF8B1CB, xmp.iid:CF9B74438735E011A41EB7EFBDF8B1CB, xmp.iid:D09B74438735E011A41EB7EFBDF8B1CB, xmp.iid:D19B74438735E011A41EB7EFBDF8B1CB, xmp.iid:4785EDE3DF37E011B4BAF6AE3F645FC6, xmp.iid:4885EDE3DF37E011B4BAF6AE3F645FC6, xmp.iid:71CC4C4FE037E011A4B3E68C4ED770DD, xmp.iid:72CC4C4FE037E011A4B3E68C4ED770DD, xmp.iid:5372011A283EE011B7ADC8C3F60F430E, xmp.iid:5472011A283EE011B7ADC8C3F60F430E, xmp.iid:5572011A283EE011B7ADC8C3F60F430E, xmp.iid:5672011A283EE011B7ADC8C3F60F430E, xmp.iid:5772011A283EE011B7ADC8C3F60F430E, xmp.iid:0BCBB3D4F745E011A339BCDBC26CED2A, xmp.iid:0CCBB3D4F745E011A339BCDBC26CED2A, xmp.iid:0DCBB3D4F745E011A339BCDBC26CED2A, xmp.iid:6BBC31786948E011B072D5919C79F2EA, xmp.iid:6CBC31786948E011B072D5919C79F2EA, xmp.iid:6DBC31786948E011B072D5919C79F2EA, xmp.iid:4F8ACD4CF549E0118604D64AE156372F, xmp.iid:508ACD4CF549E0118604D64AE156372F, xmp.iid:518ACD4CF549E0118604D64AE156372F, xmp.iid:528ACD4CF549E0118604D64AE156372F, xmp.iid:538ACD4CF549E0118604D64AE156372F, xmp.iid:091B70A7E84AE011B3D29B45AF6DD3D4, xmp.iid:0A1B70A7E84AE011B3D29B45AF6DD3D4, xmp.iid:6717000E7B4BE0118578DB1A81C84DC3, xmp.iid:6817000E7B4BE0118578DB1A81C84DC3, xmp.iid:1F090D30A659E011A56FAFE5FA2EE62A, xmp.iid:20090D30A659E011A56FAFE5FA2EE62A, xmp.iid:21090D30A659E011A56FAFE5FA2EE62A, xmp.iid:22090D30A659E011A56FAFE5FA2EE62A, xmp.iid:23090D30A659E011A56FAFE5FA2EE62A, xmp.iid:9D52466DE479E011BD6CD585C13A51B7, xmp.iid:9E52466DE479E011BD6CD585C13A51B7, xmp.iid:9F52466DE479E011BD6CD585C13A51B7, xmp.iid:A052466DE479E011BD6CD585C13A51B7, xmp.iid:A152466DE479E011BD6CD585C13A51B7, xmp.iid:A252466DE479E011BD6CD585C13A51B7, xmp.iid:A352466DE479E011BD6CD585C13A51B7, xmp.iid:A452466DE479E011BD6CD585C13A51B7, xmp.iid:A552466DE479E011BD6CD585C13A51B7, xmp.iid:A652466DE479E011BD6CD585C13A51B7, xmp.iid:D4A88EDF017AE011BD6CD585C13A51B7, xmp.iid:D5A88EDF017AE011BD6CD585C13A51B7, xmp.iid:D6A88EDF017AE011BD6CD585C13A51B7, xmp.iid:D7A88EDF017AE011BD6CD585C13A51B7, xmp.iid:D8A88EDF017AE011BD6CD585C13A51B7, xmp.iid:D9A88EDF017AE011BD6CD585C13A51B7, xmp.iid:DAA88EDF017AE011BD6CD585C13A51B7, xmp.iid:DBA88EDF017AE011BD6CD585C13A51B7, xmp.iid:DCA88EDF017AE011BD6CD585C13A51B7, xmp.iid:A7BE7D61B17AE011B36DF7A583A2E095, xmp.iid:A8BE7D61B17AE011B36DF7A583A2E095, xmp.iid:A9BE7D61B17AE011B36DF7A583A2E095, xmp.iid:AABE7D61B17AE011B36DF7A583A2E095, xmp.iid:ABBE7D61B17AE011B36DF7A583A2E095, xmp.iid:ACBE7D61B17AE011B36DF7A583A2E095, xmp.iid:ADBE7D61B17AE011B36DF7A583A2E095, xmp.iid:AEBE7D61B17AE011B36DF7A583A2E095, xmp.iid:AFBE7D61B17AE011B36DF7A583A2E095, xmp.iid:B0BE7D61B17AE011B36DF7A583A2E095, xmp.iid:72CCC71CD17AE011B36DF7A583A2E095, xmp.iid:73CCC71CD17AE011B36DF7A583A2E095, xmp.iid:74CCC71CD17AE011B36DF7A583A2E095, xmp.iid:75CCC71CD17AE011B36DF7A583A2E095, xmp.iid:76CCC71CD17AE011B36DF7A583A2E095, xmp.iid:77CCC71CD17AE011B36DF7A583A2E095, xmp.iid:78CCC71CD17AE011B36DF7A583A2E095, xmp.iid:79CCC71CD17AE011B36DF7A583A2E095, xmp.iid:7ACCC71CD17AE011B36DF7A583A2E095, xmp.iid:7BCCC71CD17AE011B36DF7A583A2E095, xmp.iid:7CCCC71CD17AE011B36DF7A583A2E095, xmp.iid:223674B5DB7AE011B36DF7A583A2E095, xmp.iid:233674B5DB7AE011B36DF7A583A2E095, xmp.iid:243674B5DB7AE011B36DF7A583A2E095, xmp.iid:253674B5DB7AE011B36DF7A583A2E095, xmp.iid:777A5F28717BE011BAF3BD70683E5B0D, xmp.iid:787A5F28717BE011BAF3BD70683E5B0D, xmp.iid:797A5F28717BE011BAF3BD70683E5B0D, xmp.iid:7A7A5F28717BE011BAF3BD70683E5B0D, xmp.iid:7B7A5F28717BE011BAF3BD70683E5B0D, xmp.iid:7C7A5F28717BE011BAF3BD70683E5B0D, xmp.iid:7D7A5F28717BE011BAF3BD70683E5B0D, xmp.iid:7E7A5F28717BE011BAF3BD70683E5B0D, xmp.iid:7F7A5F28717BE011BAF3BD70683E5B0D, xmp.iid:807A5F28717BE011BAF3BD70683E5B0D, xmp.iid:D24B89A9957BE011BAF3BD70683E5B0D, xmp.iid:D34B89A9957BE011BAF3BD70683E5B0D, xmp.iid:D44B89A9957BE011BAF3BD70683E5B0D, xmp.iid:D54B89A9957BE011BAF3BD70683E5B0D, xmp.iid:D64B89A9957BE011BAF3BD70683E5B0D, xmp.iid:D74B89A9957BE011BAF3BD70683E5B0D, xmp.iid:D84B89A9957BE011BAF3BD70683E5B0D, xmp.iid:D94B89A9957BE011BAF3BD70683E5B0D, xmp.iid:DA4B89A9957BE011BAF3BD70683E5B0D, xmp.iid:DB4B89A9957BE011BAF3BD70683E5B0D, xmp.iid:DC4B89A9957BE011BAF3BD70683E5B0D, xmp.iid:EE10686EA57BE011BAF3BD70683E5B0D, xmp.iid:EF10686EA57BE011BAF3BD70683E5B0D, xmp.iid:F010686EA57BE011BAF3BD70683E5B0D, xmp.iid:F110686EA57BE011BAF3BD70683E5B0D, xmp.iid:F210686EA57BE011BAF3BD70683E5B0D, xmp.iid:1F35B8CF3D7CE011B3C0DB48600A66FC, xmp.iid:2035B8CF3D7CE011B3C0DB48600A66FC, xmp.iid:2135B8CF3D7CE011B3C0DB48600A66FC, xmp.iid:2235B8CF3D7CE011B3C0DB48600A66FC, xmp.iid:2335B8CF3D7CE011B3C0DB48600A66FC, xmp.iid:2435B8CF3D7CE011B3C0DB48600A66FC, xmp.iid:2535B8CF3D7CE011B3C0DB48600A66FC, xmp.iid:2635B8CF3D7CE011B3C0DB48600A66FC, xmp.iid:2735B8CF3D7CE011B3C0DB48600A66FC, xmp.iid:2835B8CF3D7CE011B3C0DB48600A66FC, xmp.iid:A1CA27674C7CE011B3C0DB48600A66FC, xmp.iid:A2CA27674C7CE011B3C0DB48600A66FC, xmp.iid:A3CA27674C7CE011B3C0DB48600A66FC, xmp.iid:A4CA27674C7CE011B3C0DB48600A66FC, xmp.iid:A5CA27674C7CE011B3C0DB48600A66FC, xmp.iid:A6CA27674C7CE011B3C0DB48600A66FC, xmp.iid:A7CA27674C7CE011B3C0DB48600A66FC, xmp.iid:A8CA27674C7CE011B3C0DB48600A66FC, xmp.iid:A9CA27674C7CE011B3C0DB48600A66FC, xmp.iid:AACA27674C7CE011B3C0DB48600A66FC, xmp.iid:0AD17F82087DE011881ABF21EE38D102, xmp.iid:0BD17F82087DE011881ABF21EE38D102, xmp.iid:0CD17F82087DE011881ABF21EE38D102, xmp.iid:0DD17F82087DE011881ABF21EE38D102, xmp.iid:0ED17F82087DE011881ABF21EE38D102, xmp.iid:0FD17F82087DE011881ABF21EE38D102, xmp.iid:10D17F82087DE011881ABF21EE38D102, xmp.iid:11D17F82087DE011881ABF21EE38D102, xmp.iid:12D17F82087DE011881ABF21EE38D102, xmp.iid:13D17F82087DE011881ABF21EE38D102, xmp.iid:22F0CAD91E7DE011881ABF21EE38D102, xmp.iid:23F0CAD91E7DE011881ABF21EE38D102, xmp.iid:24F0CAD91E7DE011881ABF21EE38D102, xmp.iid:25F0CAD91E7DE011881ABF21EE38D102, xmp.iid:FE7E407C2F7DE0118226B553F011F563, xmp.iid:FF7E407C2F7DE0118226B553F011F563, xmp.iid:007F407C2F7DE0118226B553F011F563, xmp.iid:017F407C2F7DE0118226B553F011F563, xmp.iid:027F407C2F7DE0118226B553F011F563, xmp.iid:037F407C2F7DE0118226B553F011F563, xmp.iid:047F407C2F7DE0118226B553F011F563, xmp.iid:9A5D67E95E7FE011AD4BB876416730CE, xmp.iid:9B5D67E95E7FE011AD4BB876416730CE, xmp.iid:9C5D67E95E7FE011AD4BB876416730CE, xmp.iid:9D5D67E95E7FE011AD4BB876416730CE, xmp.iid:9E5D67E95E7FE011AD4BB876416730CE, xmp.iid:9F5D67E95E7FE011AD4BB876416730CE, xmp.iid:A05D67E95E7FE011AD4BB876416730CE, xmp.iid:A15D67E95E7FE011AD4BB876416730CE, xmp.iid:A25D67E95E7FE011AD4BB876416730CE, xmp.iid:A35D67E95E7FE011AD4BB876416730CE, xmp.iid:7A2763E1747FE011AD4BB876416730CE, xmp.iid:7B2763E1747FE011AD4BB876416730CE, xmp.iid:7C2763E1747FE011AD4BB876416730CE, xmp.iid:7D2763E1747FE011AD4BB876416730CE, xmp.iid:7E2763E1747FE011AD4BB876416730CE, xmp.iid:7F2763E1747FE011AD4BB876416730CE, xmp.iid:802763E1747FE011AD4BB876416730CE, xmp.iid:812763E1747FE011AD4BB876416730CE, xmp.iid:822763E1747FE011AD4BB876416730CE, xmp.iid:832763E1747FE011AD4BB876416730CE, xmp.iid:842763E1747FE011AD4BB876416730CE, xmp.iid:AA25FE3E887FE011AD4BB876416730CE, xmp.iid:AB25FE3E887FE011AD4BB876416730CE, xmp.iid:AC25FE3E887FE011AD4BB876416730CE, xmp.iid:AD25FE3E887FE011AD4BB876416730CE, xmp.iid:AE25FE3E887FE011AD4BB876416730CE, xmp.iid:AF25FE3E887FE011AD4BB876416730CE, xmp.iid:0331AA8E957FE0118F8297CC4B039324
History When                    : 2010:10:08 15:34:54+08:00, 2010:10:08 15:38:22+08:00, 2010:10:08 15:38:22+08:00, 2010:10:08 17:29:48+08:00, 2010:10:11 14:32:37+08:00, 2010:10:12 16:50:53+08:00, 2010:10:13 18:04:41+08:00, 2010:10:14 15:04:13+08:00, 2010:10:14 15:16:54+08:00, 2010:10:14 15:32:01+08:00, 2010:10:14 15:51:25+08:00, 2010:10:14 15:54:59+08:00, 2010:10:14 15:57:58+08:00, 2010:10:14 16:02:08+08:00, 2010:10:14 16:03:45+08:00, 2010:10:14 16:03:45+08:00, 2010:10:14 16:08+08:00, 2010:10:14 16:15:49+08:00, 2010:10:14 18:00:30+08:00, 2010:10:15 11:07:06+08:00, 2010:10:15 11:24:53+08:00, 2010:10:15 15:41:53+08:00, 2010:10:19 14:03:07+08:00, 2010:10:19 14:48:50+08:00, 2011:01:24 11:10:58+08:00, 2011:01:24 11:10:58+08:00, 2011:01:24 15:05:29+08:00, 2011:01:24 15:58:29+08:00, 2011:01:24 16:17:37+08:00, 2011:01:24 17:15:23+08:00, 2011:01:25 09:34+08:00, 2011:01:25 18:00:46+08:00, 2011:01:26 11:13:11+08:00, 2011:01:26 18:01:33+08:00, 2011:01:28 14:10:40+08:00, 2011:01:28 15:20:12+08:00, 2011:01:28 15:43:13+08:00, 2011:01:28 16:43:10+08:00, 2011:01:28 17:03:40+08:00, 2011:02:01 11:52:10+08:00, 2011:02:01 11:52:30+08:00, 2011:02:01 16:47:16+08:00, 2011:02:01 17:01:04+08:00, 2011:02:01 17:22:29+08:00, 2011:02:08 11:29:26+08:00, 2011:02:08 11:55:23+08:00, 2011:02:08 12:10:06+08:00, 2011:02:08 13:54:50+08:00, 2011:02:08 14:25:16+08:00, 2011:02:08 15:03:41+08:00, 2011:02:08 15:40:36+08:00, 2011:02:08 15:41+08:00, 2011:02:08 15:42:30+08:00, 2011:02:08 16:39:29+08:00, 2011:02:08 17:14:56+08:00, 2011:02:08 17:15:05+08:00, 2011:02:08 17:20:40+08:00, 2011:02:08 17:25:59+08:00, 2011:02:08 17:52:38+08:00, 2011:02:08 17:53:40+08:00, 2011:02:09 09:08:08+08:00, 2011:02:09 09:10:18+08:00, 2011:02:09 11:25:30+08:00, 2011:02:09 11:27:51+08:00, 2011:02:09 12:06:06+08:00, 2011:02:09 14:00:48+08:00, 2011:02:09 14:04:41+08:00, 2011:02:09 14:06:31+08:00, 2011:02:11 10:33:08+08:00, 2011:02:11 10:33:09+08:00, 2011:02:11 11:38:57+08:00, 2011:02:11 11:48:02+08:00, 2011:02:11 16:17:43+08:00, 2011:02:14 10:12:36+08:00, 2011:02:14 10:14:14+08:00, 2011:02:14 10:15:36+08:00, 2011:02:14 10:15:36+08:00, 2011:02:22 10:04:37+08:00, 2011:02:22 10:04:37+08:00, 2011:02:22 13:57:01+08:00, 2011:02:22 15:56:29+08:00, 2011:02:22 15:59:51+08:00, 2011:03:04 08:39:14+08:00, 2011:03:04 08:39:15+08:00, 2011:03:04 09:41:28+08:00, 2011:03:07 11:17:44+08:00, 2011:03:07 13:55:25+08:00, 2011:03:07 14:01:41+08:00, 2011:03:09 10:31:12+08:00, 2011:03:09 10:31:12+08:00, 2011:03:09 14:29:58+08:00, 2011:03:09 14:51:42+08:00, 2011:03:09 16:01:28+08:00, 2011:03:10 15:33:12+08:00, 2011:03:10 15:33:12+08:00, 2011:03:11 09:42:05+08:00, 2011:03:11 09:44:24+08:00, 2011:03:29 09:45:12+08:00, 2011:03:29 09:45:12+08:00, 2011:03:29 09:47:14+08:00, 2011:03:29 09:47:35+08:00, 2011:03:29 09:47:35+08:00, 2011:05:09 10:31:21+08:00, 2011:05:09 10:37:09+08:00, 2011:05:09 11:32:21+08:00, 2011:05:09 12:04:09+08:00, 2011:05:09 12:05:32+08:00, 2011:05:09 13:46:42+08:00, 2011:05:09 13:47:06+08:00, 2011:05:09 13:54:39+08:00, 2011:05:09 13:56:04+08:00, 2011:05:09 13:56:57+08:00, 2011:05:09 14:02:08+08:00, 2011:05:09 14:51:24+08:00, 2011:05:09 15:25:45+08:00, 2011:05:09 15:30:01+08:00, 2011:05:09 17:02:32+08:00, 2011:05:09 17:04:23+08:00, 2011:05:09 17:28:27+08:00, 2011:05:09 17:30:26+08:00, 2011:05:09 17:32:47+08:00, 2011:05:10 10:58:28+08:00, 2011:05:10 11:01:35+08:00, 2011:05:10 11:02:13+08:00, 2011:05:10 11:03:11+08:00, 2011:05:10 11:42:04+08:00, 2011:05:10 11:46:43+08:00, 2011:05:10 11:49:16+08:00, 2011:05:10 14:28:56+08:00, 2011:05:10 14:41:13+08:00, 2011:05:10 14:42:14+08:00, 2011:05:10 14:45:37+08:00, 2011:05:10 14:49:06+08:00, 2011:05:10 14:58:37+08:00, 2011:05:10 15:05:30+08:00, 2011:05:10 15:07:23+08:00, 2011:05:10 15:36:13+08:00, 2011:05:10 15:40:26+08:00, 2011:05:10 15:42:19+08:00, 2011:05:10 15:45:44+08:00, 2011:05:10 15:54:55+08:00, 2011:05:10 15:58:17+08:00, 2011:05:10 16:01:28+08:00, 2011:05:10 16:03:32+08:00, 2011:05:10 16:04:51+08:00, 2011:05:10 17:23:47+08:00, 2011:05:11 09:51:15+08:00, 2011:05:11 10:04:35+08:00, 2011:05:11 10:16:14+08:00, 2011:05:11 11:03:33+08:00, 2011:05:11 11:05:50+08:00, 2011:05:11 11:34:43+08:00, 2011:05:11 11:41:28+08:00, 2011:05:11 12:17:12+08:00, 2011:05:11 12:21:52+08:00, 2011:05:11 14:04:05+08:00, 2011:05:11 14:12:34+08:00, 2011:05:11 14:28:14+08:00, 2011:05:11 14:39:50+08:00, 2011:05:11 15:00:12+08:00, 2011:05:11 15:01:19+08:00, 2011:05:11 15:08:45+08:00, 2011:05:11 15:17:32+08:00, 2011:05:11 15:20:35+08:00, 2011:05:11 15:24:33+08:00, 2011:05:11 15:46:58+08:00, 2011:05:11 15:52+08:00, 2011:05:11 16:05:27+08:00, 2011:05:11 16:06:22+08:00, 2011:05:11 17:30:23+08:00, 2011:05:11 17:40:23+08:00, 2011:05:11 17:42:39+08:00, 2011:05:12 10:16:14+08:00, 2011:05:12 10:43:39+08:00, 2011:05:12 10:47:15+08:00, 2011:05:12 10:53:17+08:00, 2011:05:12 11:11:05+08:00, 2011:05:12 11:11:26+08:00, 2011:05:12 11:30:36+08:00, 2011:05:12 11:37:22+08:00, 2011:05:12 11:43:10+08:00, 2011:05:12 11:49:44+08:00, 2011:05:12 12:00:41+08:00, 2011:05:12 12:00:59+08:00, 2011:05:12 14:35:32+08:00, 2011:05:12 15:00:13+08:00, 2011:05:12 15:05:26+08:00, 2011:05:12 15:57:42+08:00, 2011:05:12 16:10:58+08:00, 2011:05:12 16:26:08+08:00, 2011:05:12 16:30:23+08:00, 2011:05:12 17:40:18+08:00, 2011:05:13 10:27:12+08:00, 2011:05:13 10:37:58+08:00, 2011:05:13 11:16:53+08:00, 2011:05:13 11:25:18+08:00, 2011:05:13 11:34:30+08:00, 2011:05:13 11:36:41+08:00, 2011:05:13 11:54:48+08:00, 2011:05:13 12:08:36+08:00, 2011:05:13 12:50:48+08:00, 2011:05:13 13:00:33+08:00, 2011:05:13 13:07:07+08:00, 2011:05:13 14:12:36+08:00, 2011:05:13 14:15:37+08:00, 2011:05:13 14:17:03+08:00, 2011:05:13 15:06:12+08:00, 2011:05:13 15:39:01+08:00, 2011:05:13 15:59:27+08:00, 2011:05:13 16:10:58+08:00, 2011:05:13 16:17:42+08:00, 2011:05:13 16:25:29+08:00, 2011:05:13 16:25:33+08:00, 2011:05:16 09:50:44+08:00, 2011:05:16 09:52:22+08:00, 2011:05:16 11:13:13+08:00, 2011:05:16 11:18:58+08:00, 2011:05:16 11:22:57+08:00, 2011:05:16 11:39:14+08:00, 2011:05:16 11:43:41+08:00, 2011:05:16 11:47:57+08:00, 2011:05:16 11:49:18+08:00, 2011:05:16 12:24:45+08:00, 2011:05:16 12:27:59+08:00, 2011:05:16 12:34:17+08:00, 2011:05:16 13:23:50+08:00, 2011:05:16 13:24:16+08:00, 2011:05:16 13:27:14+08:00, 2011:05:16 13:35:42+08:00, 2011:05:16 13:37:19+08:00, 2011:05:16 13:52:24+08:00, 2011:05:16 14:21:06+08:00, 2011:05:16 14:35:08+08:00, 2011:05:16 14:43:50+08:00, 2011:05:16 14:46:37+08:00, 2011:05:16 14:55:09+08:00, 2011:05:16 15:20:07+08:00, 2011:05:16 15:22:03+08:00, 2011:05:16 15:25:01+08:00, 2011:05:16 15:40:44+08:00, 2011:05:16 16:21:54+08:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /metadata, /, /metadata, /;/metadata, /, /, /, /metadata, /;/metadata, /, /, /, /, /metadata, /;/metadata, /, /, /, /metadata, /;/metadata, /, /, /metadata, /;/metadata, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /
Derived From Instance ID        : xmp.iid:22090D30A659E011A56FAFE5FA2EE62A
Derived From Document ID        : xmp.did:20090D30A659E011A56FAFE5FA2EE62A
Derived From Original Document ID: xmp.did:B79E358BAED2DF118954AF1B607B691D
Derived From Rendition Class    : default
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 150.00, 150.00, 300.00
Manifest Placed Y Resolution    : 300.00, 150.00, 150.00, 300.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : xmp.iid:551D2C50957FE0118164E4E661081988, xmp.iid:078582FE723AE0118779FEB04DF17104, xmp.iid:CD103AD39939E011A336924E3319B05B, xmp.iid:120CEB13707FE011B121C53399088B43
Manifest Reference Document ID  : uuid:576CB3B9C775DE118B44EF1AABD93F58, xmp.did:3EB59551623AE011B9F2BF700AC96878, xmp.did:8C91E49222F2DF118F6DAF8D435D068F, uuid:1E262AC13F7DE011AB83F3139217D5F6
Doc Change Count                : 39384
Authors Position                : Mr.
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Has XFA                         : No
Page Count                      : 129
Author                          : Nick Schuster

EXIF Metadata provided by EXIF.tools