D Link IR814A1 AC750 Wi-Fi Router User Manual DIR 814 A1 Manual v1 00 WW

D Link Corporation AC750 Wi-Fi Router DIR 814 A1 Manual v1 00 WW

UserManual.wiki >

IR814A1 User Manual

Users Manual

Version 1.00 | 07/12/2016User ManualDIR-814AC750 Wi-Fi Router

iiD-Link DIR-814 User ManualTable of ContentsPreface ................................................................................. iProduct Overview .............................................................. 1Package Contents ......................................................................... 1System Requirements ................................................................. 2Introduction ................................................................................... 3Features ............................................................................................4Hardware Overview ..................................................................... 5Connections ........................................................................... 5LEDs ........................................................................................... 6Installation ......................................................................... 7Before you Begin ........................................................................... 7Wireless Installation Considerations ......................................8Manual Setup ................................................................................. 9Getting Started ................................................................10QRS Mobile App ..........................................................................11Setup Wizard ................................................................................16Conguration ...................................................................19Home ..............................................................................................20Internet ................................................................................... 20DIR-814 ...................................................................................21Connected Clients ..............................................................22Settings ..........................................................................................23Wizard .....................................................................................23Internet ................................................................................... 23IPv6 .....................................................................................32Wireless ..................................................................................47Guest Zone .......................................................................49Network .................................................................................. 50Features ..........................................................................................52QoS Engine............................................................................52Firewall Settings ..................................................................53IPv4/IPv6 Rules ...............................................................55Port Forwarding ..................................................................56Virtual Server ...................................................................57Website Filter ........................................................................58Static Routes .........................................................................59IPv6 .....................................................................................60Dynamic DNS .......................................................................61IPv6 Host ...........................................................................62Management ................................................................................ 63Time & Schedule .................................................................63Time ....................................................................................63Schedule ...........................................................................64System Log ............................................................................65Admin .....................................................................................66System ...............................................................................67Upgrade .................................................................................68Statistics .................................................................................69Connect a Wireless Client to your Router ......................70WPS Button ...................................................................................70Table of Contents

iiiD-Link DIR-814 User ManualTable of ContentsWindows® 8 ...................................................................................71WPA/WPA2 ............................................................................71Windows® 7 ...................................................................................73WPA/WPA2 ............................................................................73WPS ..........................................................................................76Windows Vista® ............................................................................80WPA/WPA2 ............................................................................81Windows® XP ................................................................................83WPA/WPA2 ............................................................................84Troubleshooting ..............................................................86Wireless Basics .................................................................90What is Wireless? .........................................................................91Tips ...................................................................................................93Wireless Modes ............................................................................94Networking Basics ...........................................................95Check your IP address ...............................................................95Statically Assign an IP address ...............................................96Wireless Security ............................................................97What is WPA? ...................................................................97Technical Specications ..................................................98Safety Statements ...........................................................99

1D-Link DIR-814 User ManualSection 1 - Product OverviewProduct OverviewPackage ContentsNote: Using a power supply with a dierent voltage rating than the one included with the DIR-814 will cause damage and void the warranty for this product.If any of the above items are missing, please contact your reseller.DIR-814 AC750 Wi-Fi RouterEthernet CablePower Adapter

2D-Link DIR-814 User ManualSection 1 - Product OverviewNetwork Requirements• An Ethernet-based cable or DSL modem• IEEE 802.11ac/n/g/b/a wireless clients• 10/100 EthernetWeb-based Conguration Utility RequirementsComputer with the following:• Windows®, Macintosh, or Linux-based operating system • An installed Ethernet adapterBrowser Requirements:• Internet Explorer 11 or higher• Firefox 20 or higher• Safari 7 or higher• Chrome 25 or higherWindows® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version.QRS Mobile Requirements • iPhone®/iPad®/iPod Touch® (iOS 7.0 or higher)• Android™ device (2.3.3 or higher)System Requirements

3D-Link DIR-814 User ManualSection 1 - Product OverviewIntroductionThe D-Link DIR-814 is a wireless IEEE 802.11ac compliant device that delivers up to 3x faster speeds than 802.11n while staying backward compatible with 802.11n/g/b/a devices. This means you can connect the DIR-814 to a cable or DSL modem and provide high-speed Internet access to multiple computers, game consoles, and media players. You can create a secure wireless network to share photos, les, music, videos, printers, and network storage. Powered by 802.11ac technology and equipped with four external antennas, this router provides superior wireless coverage for larger homes and oces, or for users running bandwidth-intensive applications. The DIR-814 also includes a 4-port 10/100 Fast Ethernet switch that connects to wired devices for uninterrupted video calling and faster le transfers.D-Link Intelligent QoS Technology helps to increase network eciency by analyzing wired and wireless network trac and prioritizing it in order of importance. This way, important network trac such as VoIP and video streaming, take priority over background network trac such as a le downloads and print tasks, ensuring you have optimal network performance.The DIR-814 supports the latest wireless security features to help prevent unauthorized access, be it from over a wireless network or the Internet. Support for WPA™ and WPA2™ standards ensure that you will be able to use the best possible encryption regardless of your client devices. In addition, this router is equipped with a dual-active rewall (SPI and NAT) to prevent potential attacks over the Internet.

4D-Link DIR-814 User ManualSection 1 - Product Overview• Ultimate Fast Wireless Networking - The DIR-814 provides up to 300 Mbps wireless connection in 2.4 GHz band, and up to 867 Mbps* wireless connection in 5 GHz with other 802.11ac and 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. The performance of this 802.11ac wireless router gives you the freedom of wireless networking at speeds 3x faster than 802.11n.• Compatible with 802.11n/g/b/a Wireless Devices - The DIR-814 is still fully compatible with the IEEE 802.11a, IEEE 802.11b, 802.11g and 802.11n, so it can connect with existing 802.11a, IEEE 802.11b, 802.11g and 802.11n PCI, USB, and CardBus adapters.• Advanced Firewall Features - The web-based user interface displays a number of advanced network management features. Easily apply content ltering based on MAC address, URL, and/or domain name. Schedule these lters to be active on certain days or for a duration of hours or minutes.• User-friendly Setup Wizard - Through its easy-to-use web-based user interface, the DIR-814 lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company’s server. Congure your router to your specic settings within minutes. * Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and 802.11ac specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.Features

5D-Link DIR-814 User ManualSection 1 - Product OverviewHardware OverviewConnections1LAN Ports (1-4) Connect 10/100 Ethernet devices such as computers, switches, storage (NAS) devices and game consoles.2Internet Port Using an Ethernet cable, connect your broadband modem to this port.3Power Receptor Receptor for the supplied power adapter. 4WPS Button Press to start the WPS process. 5Reset Button Insert a paperclip in the hole on the bottom of the device and wait for several seconds to reset the router to default settings.532 41

6D-Link DIR-814 User ManualSection 1 - Product OverviewHardware OverviewLEDs1Power LED A solid light indicates that the device is powered on. The light will blink while the device is in recovery mode.2Internet LED A solid light indicates that an Internet link is established.3WPS LED A solid light indicates that the WPS handshake has been completed. The light will blink while the WPS handshake is processing.4WLAN LED A solid light indicates that the wireless segment is ready. 5LAN LEDs 1-4 A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4 respectively. 1 32 4 5

7D-Link DIR-814 User ManualSection 2 - InstallationBefore you BeginInstallationThis section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. • Please congure the router with the computer that was last connected directly to your modem. • You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn o your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your Internet Service Provider (ISP) to change connection types (USB to Ethernet). • If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoET, BroadJump, or EnterNet 300 from your computer or you will not be able to connect to the Internet.

8D-Link DIR-814 User ManualSection 2 - InstallationWireless Installation ConsiderationsThe D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building materials make a dierence. A solid metal door or aluminum studs may have a negative eect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use.

9D-Link DIR-814 User ManualSection 2 - Installation1. Turn o and unplug your cable or DSL broadband modem. This is required.2. Position your router close to your modem and a computer. Place the router in an open area of your intended work area for better wireless coverage.3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer. Plug it into the LAN port labeled 1 on the back of your router. The router is now connected to your computer.4. Plug one end of the included blue Ethernet cable that came with your router into the yellow port labeled INTERNET on the back of the router. Plug the other end of this cable into the Ethernet port on your modem.5. Reconnect the power adapter to your cable or DSL broadband modem and wait for two minutes.6. Connect the supplied power adapter into the power port on the back of the router and then plug it into a power outlet or surge protector. Press the power button and verify that the power LED is lit. Allow 1 minute for the router to boot up.7. If you are connecting to a broadband service that uses a dynamic connection (not PPPoE), you may be online already. Try opening a web browser and connecting to a website. If the Internet LED indicator is lit, indicating a connection on the Internet/WAN port, then the router should be able to connect to the Internet.Manual Setup

10D-Link DIR-814 User ManualSection 3 - Getting StartedThere are several dierent ways you can congure your router to connect to the Internet and connect to your clients:• QRS Mobile App - Use your Android device, iPhone, iPad, or iPod touch to congure your router. Refer to page 11.• D-Link Setup Wizard - This wizard will launch when you log into the router for the rst time. Refer to page 16.• Manual Setup - Log into the router and manually congure your router. Refer to page 19Getting Started

11D-Link DIR-814 User ManualSection 3 - Getting StartedQRS Mobile AppQRS Mobile app allows you to install and congure your router from your mobile device.Note: The screenshots may be dierent depending on your mobile device’s OS version. Step 1Search for the free QRS Mobile App on the iTunes Store or Google Play.Step 2Once your app is installed, you may now congure your router. Connect to the router wirelessly by going to your wireless utility on your device. Scan for the Wi-Fi name (SSID) as listed on device label. Select and then enter your Wi-Fi password.Step 3Once you connect to the router, launch the QRS Mobile app from the Home screen of your device.Note: The following steps show the Android interface of the QRS Mobile app. If you are using an iPhone, iPad, or iPod touch, the appearance may be dierent to that of the screenshots, but the process is the same.

12D-Link DIR-814 User ManualSection 3 - Getting StartedStep 4You will see the welcome screen. Tap Start to proceed, then enter your device password and tap Log In. Tap Next once the Operation Mode screen appears.Step 5At this point, please ensure that you the router is connected to a modem. Plug one end of the provided Ethernet cable into your DSL or cable modem, and plug the other end into the port marked INTERNET on the DIR-814. Tap Next to automatically detect your Internet connection and proceed to the next step.

13D-Link DIR-814 User ManualSection 3 - Getting StartedStep 6You will be asked to congure your 2.4 GHz wireless network. Enter a network name (SSID) of your choice, or leave it unchanged to accept the default SSID. Next, choose a Wi-Fi password of at least 8 characters. Any device trying to connect to the router wirelessly will need to enter this password the rst time it connects.Tap Next to congure your 5 GHz wireless network. When satised tap Next to proceed.Step 7Enter the administrator password of your choice. Unlike the Wi-Fi password, this password is only required when you need to congure the router. See "Conguration" on page 19 for details of when this password is used. Tap Next to proceed.

14D-Link DIR-814 User ManualSection 3 - Getting StartedStep 8If you wish to receive push notications whenever a new rmware update is available, check the Notify me when new rmware is available box and tap Next.Otherwise, just tap Next to proceed.Step 10You will be presented with a summary of your chosen settings. Tap Save to complete the setup.

15D-Link DIR-814 User ManualSection 3 - Getting StartedCongratulations, your device has been successfully congured! You can share this information by tapping Share By E-mail, or tap Finish to exit the app.

16D-Link DIR-814 User ManualSection 3 - Getting StartedThe wizard is designed to guide you through a step-by-step process to congure your new D-Link router and connect to the Internet.Click Next to continue. Setup WizardIf this is your rst time installing the router, open your web browser and enter http://dlinkrouter.local./ in the address bar. Alternatively, enter the IP address of the router (default: http://192.168.60.1). Please refer to page 19.Please wait while your router detects your Internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password.DIR-814DIR-814

17D-Link DIR-814 User ManualSection 3 - Getting StartedIf the router does not detect a valid Internet connection, a list of connection types to choose from will be displayed.Select your Internet connection type (this information can be obtained from your Internet Service Provider) and click Next to continue.If the router detected or you selected PPPoE, enter your PPPoE username and password and click Next to continue. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. DIR-814DIR-814DIR-814

18D-Link DIR-814 User ManualSection 3 - Getting StartedCreate a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have this passphrase or key entered to be able to connect to your wireless network.Click Next to continue.In order to secure the router, please enter a new password. You will be prompted for this password every time you want to use the router’s web conguration utility. Click Next to continue.At the end of the wizard, you will be presented with a nal summary of your settings. Click Finish to close the wizard.DIR-814DIR-814DIR-814DIR-814

19D-Link DIR-814 User ManualSection 4 - CongurationCongurationEnter your password. If you previously followed the setup wizard, please use the admin password you entered during the wizard. Otherwise, leave the password blank. Click Log In to proceed.Note: If you cannot remember your password and cannot log in, press the reset button on the bottom of the device for longer than 10 seconds to restore the router to its default settings.To access the conguration utility, open a web-browser such as Internet Explorer and enter http://dlinkrouter.local./ or you may also connect by typing the IP address of the router (by default this is http://192.168.60.1) in the address bar.The router’s home page will open displaying its current connection status.The bar at the top of the page has quick access to Settings and Management functions. You may quickly jump back Home at any time.Note: The system will automatically log out after a period of inactivity.DIR-814

20D-Link DIR-814 User ManualSection 4 - CongurationHomeThe Home page displays the current status of the router in the form of an interactive diagram. You can click each icon to display information about each part of the network at the bottom of the screen. The menu bar at the top of the page will allow you to quickly navigate to other pages.The Home page displays whether or not the router is currently connected to the Internet. If it is disconnected, click Click to repair to bring up the setup wizard (see page 16).To bring up more details about your Internet connection, click on the Internet icon. Click IPv4 or IPv6 to see details of the IPv4 connection and IPv6 connection respectively.Click Release to disconnect from the Internet. If you do this and wish to reconnect, click Renew.To recongure the Internet settings, refer to page 23.InternetDIR-814DIR-814

21D-Link DIR-814 User ManualSection 4 - CongurationDIR-814Click on the DIR-814 icon to view details about the router and its wireless settings.Here you can see the router’s current wireless settings, as well as its MAC address and IPv4/IPv6 addresses.To recongure the network settings, either click Go to settings on the lower left, or click Settings (at the top of the page) and then Network on the menu that appears. For more information refer to page 50.To recongure the wireless settings, either click Go to settings, on the lower right, or click Settings (at the top of the page) and then Wireless on the menu that appears. For more information refer to page 47.DIR-814DIR-814

22D-Link DIR-814 User ManualSection 4 - CongurationConnected ClientsClick on the Connected Clients icon to view details about the router and its wireless settings.On this page you can see all the clients currently connected to the router, and their IP addresses.To edit each client’s settings, click the pencil icon on the client you want to edit.Enter a custom name for this client.Displays the vendor of the device.Displays the MAC address of the device.Enter a specic IP address for this client.Enable to reserve this IP address for this client.Allow or Block access to the router.Click Save when you are done.Name:Vendor:MAC Address:IP Address:Reserve IP:Parental Control:DIR-814

23D-Link DIR-814 User ManualSection 4 - CongurationSettingsWizardInternetIn the Settings menu on the bar on the top of the page, click Wizard to open the setup wizard. This is the same wizard that appears when you start the router for the rst time. Refer to page 16 for details.In the Settings menu on the bar on the top of the page, click Internet to see the Internet conguration options.Choose your Internet connection type from the drop-down menu. You will be presented with the appropriate options for your connection type. Click Advanced Settings... to expand the list and see all of the options.My Internet Connection Is:For Dynamic IP (DHCP) refer to page 24.For Static IP refer to page 25.For PPPoE refer to page 26.For PPTP refer to page 27.For L2TP refer to page 29.For DS-Lite refer to page 31.vTo congure an IPv6 connection, click the IPv6 link. Refer to page 32.

24D-Link DIR-814 User ManualSection 4 - CongurationThe host name is optional but may be required by some ISPs. Leave it blank if you are not sure.Enter the primary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP.Enter the secondary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP.Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP.The default MAC address is set to the Internet port’s physical interface MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client.Click Save when you are done.Host Name:Primary DNS Server:Secondary DNS Server:MTU:MAC Address Clone:Dynamic IP (DCHP)Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP does not give you an IP address to use.

25D-Link DIR-814 User ManualSection 4 - CongurationEnter the IP address provided by your ISP.Enter the subnet mask provided by your ISP.Enter the default gateway address provided by your ISP.Enter the primary DNS server IP address assigned by your ISP.Enter the secondary DNS server IP address assigned by your ISP.Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP.The default MAC address is set to the Internet port’s physical interface MAC address on the router. You can use drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client.Click Save when you are done.IP Address:Subnet Mask:Default Gateway:Primary DNS Server:Secondary DNS Server:MTU:MAC Address Clone:Static IPSelect Static IP if your IP information is provided by your Internet Service Provider (ISP).

26D-Link DIR-814 User ManualSection 4 - CongurationEnter the username provided by your ISP.Enter the password provided by your ISP.Select either Always-on, On-Demand, or Manual.Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP.Enter the IP address provided by your ISP (Static IP only).Enter the ISP service name (optional).Enter the primary DNS server IP address assigned by your ISP.Enter the secondary DNS server IP address assigned by your ISP.Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP.The default MAC address is set to the Internet port’s physical interface MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client.Click Save when you are done.Username:Password:Reconnect Mode:Maximum Idle Time:Address Mode:IP Address:Service Name:Primary DNS Server:Secondary DNS Server:MTU:MAC Address Clone:Select PPPoE if your Internet connection requires you to enter a username and password. This information is provided by your Internet Service Provider (ISP).PPPoE

27D-Link DIR-814 User ManualSection 4 - CongurationEnter the PPTP server IP address provided by your ISP.Enter the username provided by your ISP.Enter the password provided by your ISP.Select either Always-on, On-Demand, or Manual.Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP.Enter the IP address provided by your ISP (Static IP only).Enter the subnet mask provided by your ISP (Static IP only).Enter the gateway IP address provided by your ISP (Static IP only).Enter the primary DNS server IP address assigned by your ISP.PPTP Server IP Address:Username:Password:Reconnect Mode:Maximum Idle Time:Address Mode:PPTP IP Address:PPTP Subnet Mask:PPTP Gateway IP Address:Primary DNS Server:Choose PPTP (Point-to-Point-Tunneling Protocol ) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username and password.PPTP

28D-Link DIR-814 User ManualSection 4 - CongurationEnter the secondary DNS server IP address assigned by your ISP.Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP.Click Save when you are done.Secondary DNS Server:MTU:

29D-Link DIR-814 User ManualSection 4 - CongurationL2TPEnter the L2TP server IP address provided by your ISP.Enter the username provided by your ISP.Enter the password provided by your ISP.Select either Always-on, On-Demand, or Manual.Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP.Enter the IP address provided by your ISP (Static IP only).Enter the subnet mask provided by your ISP (Static IP only).Enter the gateway IP address provided by your ISP (Static IP only).Enter the primary DNS server IP address assigned by your ISP.L2TP Server IP Address:Username:Password:Reconnect Mode:Maximum Idle Time:Address Mode:L2TP IP Address:L2TP Subnet Mask:L2TP Gateway IP Address:Primary DNS Server:Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP will provide you with a username and password.

30D-Link DIR-814 User ManualSection 4 - CongurationEnter the secondary DNS server IP address assigned by your ISP.Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP.Click Save when you are done.Secondary DNS Server:MTU:

31D-Link DIR-814 User ManualSection 4 - CongurationDS-LiteSelect DS-Lite DHCPv6 to let the router allocate the AFTR IPv6 address automatically. Select Manual Conguration to enter the AFTR IPv6 address manually.If you selected Manual Conguration above, enter the AFTR IPv6 address used here.Enter the B4 IPv4 address value used here.Once connected, the WAN IPv6 address will be displayed here.Once connected, the IPv6 WAN default gateway address will be displayed here.Click Save when you are done.DS-Lite Conguration:AFTR IPv6 Address:B4 IPv6 Address:WAN IPv6 Address:IPv6 WAN Default Gateway:DS-Lite is an IPv6 connection type. After selecting DS-Lite, the following parameters will be available for conguration:

32D-Link DIR-814 User ManualSection 4 - CongurationIPv6To congure an IPv6 connection, click the IPv6 link. To return to the IPv4 settings, click IPv4.Choose your IPv6 connection type from the drop-down menu. You will be presented with the appropriate options for your connection type. Click Advanced Settings... to expand the list and see all of the options.My Internet Connection Is:For Auto Detection refer to page 33.For Static IPv6 refer to page 35.For Auto Conguration (SLAAC/DHCPv6) refer to page 37.For PPPoE refer to page 39.For IPv6 in IPv4 Tunnel refer to page 41.For 6 to 4 refer to page 43.For 6rd refer to page 44.For Local Connectivity Only refer to page 46.

33D-Link DIR-814 User ManualSection 4 - CongurationAuto DetectionSelect either Obtain DNS server address automatically or Use the following DNS address.If you selected Use the following DNS address above, enter the primary DNS server address. If you selected Use the following DNS address above, enter the secondary DNS server address.Enable or disable prex delegation services.If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the router.Displays the router’s LAN link-local address.Enable or disable the Automatic IPv6 Address Assignment feature.Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface.Note: This feature requires a smaller subnet prex than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information.DNS Type:Primary DNS Server:Secondary DNS Server:Enable DHCP-PD:LAN IPv6 Address:LAN IPv6 Link-Local Address:Enable Automatic IPv6 Address Assignment:Enable Automatic DHCP-PD in LAN:This is a connection method where the ISP assigns your IPv6 address when your router requests one from the ISP’s server. Some ISPs require you to make some settings on your side before your router can connect to the IPv6 Internet.

34D-Link DIR-814 User ManualSection 4 - CongurationSelect Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6.Enter the IPv6 address lifetime (in minutes).Click Save when you are done.Auto Conguration Type:Router Advertisement Lifetime:

35D-Link DIR-814 User ManualSection 4 - CongurationStatic IPv6Enable or disable a link-local address.If you disabled Use Link-Local Address, enter the address supplied by your ISP. If you disabled Use Link-Local Address, enter the subnet prex length supplied by your ISP.Enter the default gateway for your IPv6 connection.Enter the primary DNS server address. Enter the secondary DNS server address.Enter the LAN (local) IPv6 address for the router.Displays the router’s LAN link-local address.Check to enable the Automatic IPv6 Address Assignment feature.Use Link-Local Address:IPv6 Address:Subnet Prex Length:Default Gateway:Primary DNS Server:Secondary DNS Server:LAN IPv6 Address:LAN IPv6 Link-Local Address:Enable Automatic IPv6 Address Assignment:Select Static IP if your IPv6 information is provided by your Internet Service Provider (ISP).

36D-Link DIR-814 User ManualSection 4 - CongurationSelect Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6.Enter the IPv6 address lifetime (in minutes).Click Save when you are done.Auto Conguration Type:Router Advertisement Lifetime:

37D-Link DIR-814 User ManualSection 4 - CongurationAuto Conguration (SLAAC/DHCPv6)Select either Obtain DNS server address automatically or Use the following DNS address.If you selected Use the following DNS address above, enter the primary DNS server address. If you selected Use the following DNS address above, enter the secondary DNS server address.Enable or disable prex delegation services.If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the router.Displays the router’s LAN link-local address.Enable or disable the Automatic IPv6 Address Assignment feature.Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface.Note: This feature requires a smaller subnet prex than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information.DNS Type:Primary DNS Server:Secondary DNS Server:Enable DHCP-PD:LAN IPv6 Address:LAN IPv6 Link-Local Address:Enable Automatic IPv6 Address Assignment:Enable Automatic DHCP-PD in LAN:This is a connection method where the ISP assigns your IPv6 address when your router requests one from the ISP’s server. Some ISPs require youto make some settings on your side before your router can connect to the IPv6 Internet.

38D-Link DIR-814 User ManualSection 4 - CongurationSelect Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6Enter the IPv6 address lifetime (in minutes).Click Save when you are done.Auto Conguration Type:Router Advertisement Lifetime:

39D-Link DIR-814 User ManualSection 4 - CongurationPPPoEChoose Share with IPv4 to re-use your IPv4 PPPoE username and password, or Create a new session.If you selected Create a new session above, enter the PPPoE username provided by your ISP here.If you selected Create a new session above, enter the PPPoE password provided by your ISP here.Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP.Enter the IP address provided by your ISP (Static IP only).Select either Obtain DNS server address automatically or Use the following DNS address.If you selected Use the following DNS address above, enter the primary DNS server address. If you selected Use the following DNS address above, enter the secondary DNS server address.Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface.Note: This feature requires a smaller subnet prex than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information.PPPoE Session:Username:Password:Address Mode:IP Address:DNS Type:Primary DNS Server:Secondary DNS Server:Enable DHCP-PD:Select PPPoE if your Internet connection requires you to enter a username and password. This information is provided by your Internet Service Provider (ISP).

40D-Link DIR-814 User ManualSection 4 - CongurationEnter the LAN (local) IPv6 address for the router.Displays the router’s LAN link-local address.Enable or disable the Automatic IPv6 Address Assignment feature.Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface.Note: This feature requires a smaller subnet prex than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information.Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6Enter the IPv6 address lifetime (in minutes).Click Save when you are done.LAN IPv6 Address:LAN IPv6 Link-Local Address:Enable Automatic IPv6 Address Assignment:Enable Automatic DHCP-PD in LAN:Auto Conguration Type:Router Advertisement Lifetime:

41D-Link DIR-814 User ManualSection 4 - CongurationIPv6 in IPv4 TunnelEnter the IPv4 remote address you will use.Enter the IPv6 remote address you will use.Enter the IPv4 local address you will use.Enter the IPv6 local address you will use.Enter the subnet prex length supplied by your ISP.Select either Obtain DNS server address automatically or Use the following DNS address.If you selected Use the following DNS address above, enter the primary DNS server address. If you selected Use the following DNS address above, enter the secondary DNS server address.Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface.Note: This feature requires a smaller subnet prex than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information.Remote IPv4 Address:Remote IPv6 Address:Local IPv4 Address:Local IPv6 Address:Subnet Prex Length:DNS Type:Primary DNS Server:Secondary DNS Server:Enable DHCP-PD:The user can congure the IPv6 connection to run in IPv4 Tunnel mode. IPv6 over IPv4 tunneling encapsulates IPv6 packets in IPv4 packets so that IPv6 packets can be sent over an IPv4 infrastructure.

42D-Link DIR-814 User ManualSection 4 - CongurationIf you disabled DHCP-PD, enter the LAN (local) IPv6 address for the router.Displays the router’s LAN link-local address.Enable or disable the Automatic IPv6 Address Assignment feature.Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface.Note: This feature requires a smaller subnet prex than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information.Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6Enter the IPv6 address lifetime (in minutes).Click Save when you are done.LAN IPv6 Address:LAN IPv6 Link-Local Address:Enable Automatic IPv6 Address Assignment:Enable Automatic DHCP-PD in LAN:Auto Conguration Type:Router Advertisement Lifetime:

43D-Link DIR-814 User ManualSection 4 - Conguration6 to 4Displays the 6 to 4 address. Enter the 6 to 4 relay supplied by your ISP. Enter the primary DNS server address. Enter the secondary DNS server address.Enter the LAN (local) IPv6 address for the router.Displays the router’s LAN link-local address.Check to enable the Automatic IPv6 Address Assignment feature.Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6Enter the IPv6 address lifetime (in minutes).Click Save when you are done.6 to 4 Address:6 to 4 Relay:Primary DNS Server:Secondary DNS Server:LAN IPv6 Address:LAN IPv6 Link-Local Address:Enable Automatic IPv6 Address Assignment:Auto Conguration Type:Router Advertisement Lifetime:In this section the user can congure the IPv6 6 to 4 connection settings. 6to4 is an IPv6 address assignment and automatic tunneling technology that is used to provide unicast IPv6 connectivity between IPv6 sites and hosts across the IPv4 Internet.

44D-Link DIR-814 User ManualSection 4 - Conguration6rdCurrently unsupported.Enter the primary DNS server address. Enter the secondary DNS server address. Enable if you want to minimize the number of routes to the destination by using a hub and spoke method of networking.Choose the 6rd DHCPv4 Option to automatically discover and populate the data values, or Manual Conguration to enter the settings yourself.Enter the 6rd IPv6 prex and mask length supplied by your ISP (manual conguration only). Enter the 6rd border relay IPv4 address settings supplied by your ISP (manual conguration only).Enter the LAN (local) IPv6 address for the router.Displays the router’s LAN link-local address.Assign IPv6 Prex:Primary DNS Server:Secondary DNS Server:Enable Hub and Spoke Mode:6rd Conguration:6rd IPv6 Prex:6rd Border Relay IPv4 Address:LAN IPv6 Address:LAN IPv6 Link-Local Address:In this section the user can congure the IPv6 6rd connection settings.

45D-Link DIR-814 User ManualSection 4 - CongurationCheck to enable the Automatic IPv6 Address Assignment feature.Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6.Enter the IPv6 address lifetime (in minutes).Click Save when you are done.Enable Automatic IPv6 Address Assignment:Auto Conguration Type:Router Advertisement Lifetime:

46D-Link DIR-814 User ManualSection 4 - CongurationLocal Connectivity OnlyClick here to enable Unique Local IPv6 Unicast Addresses settings.Checking this box will automatically congure the ULA prex for the default setting.If you wish to choose your own ULA prex, enter it here.This section will display the current settings for your IPv6 ULA.Click Save when you are done.Enable ULA:Use Default ULA Prex:ULA Prex:Current IPv6 ULA Settings:Local Connectivity Only allows you to set up an IPv6 connection that will not connect to the Internet.

47D-Link DIR-814 User ManualSection 4 - CongurationWirelessEnable or disable the wireless frequency band.Create a name for your wireless network using up to 32 characters. Create a password to use for wireless security. Wireless clients will need to enter this password to successfully connect to the network.Choose None, WEP, or WPA/WPA2-(Personal) (recommended).Select the desired wireless networking standards to use. The available options will depend on the wireless frequency band, as well as the currently selected security mode.Select the desired channel. The default is Auto (recommended).Select the desired wireless transmission power.Select Auto 20/40 if you are using both 802.11n and non-802.11n wireless devices, or select 20 MHz if you are not using any 802.11n wireless clients.The default setting is Visible. Select Invisible if you do not want to broadcast the SSID of your wireless network.Status:Wi-Fi Name (SSID):Password:Security Mode:802.11 Mode:Wi-Fi Channel:Transmission Power:Channel Width:Visibility Status:In the Settings menu on the bar on the top of the page, click Wireless to see the wireless conguration options. To congure the router’s guest zone, click the Guest Zone link. Refer to page 49 for details. Click Advanced Settings... to expand the list and see all of the options. The following options apply to both the 2.4 GHz and the 5 GHz wireless frequency bands:

48D-Link DIR-814 User ManualSection 4 - CongurationUse the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 64 for more information.Click Save when you are done.Schedule:

49D-Link DIR-814 User ManualSection 4 - CongurationGuest ZoneEnable or disable the guest zone for each wireless frequency band.Enter a wireless network name (SSID) that is dierent from your main wireless network.Create a password to use for wireless security. Wireless clients will need to enter this password to successfully connect to the guest zone.Enabling this option will confine connectivity to the Internet, disallowing guests from accessing other local network devices.Click Save when you are done.Status:Wi-Fi Name (SSID):Password:Internet Access Only:In the Settings menu on the bar on the top of the page, click Wireless, then click the Guest Zone link. Click Advanced Settings... to expand the list and see all of the options. The following options apply to both the 2.4 GHz and the 5 GHz wireless frequency bands: The guest zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones will be separate from your main wireless network. You may congure dierent zones for the 2.4 GHz and 5 GHz wireless bands.

50D-Link DIR-814 User ManualSection 4 - CongurationNetworkEnter the IP address of the router. The default IP address is 192.168.60.1.If you change the IP address, once you click Save, you will need to enter the new IP address in your browser to get back into the conguration utility.Enter the subnet mask of the router. The default subnet mask is 255.255.255.0.The default address to access the router’s configuration is http://dlinkrouter.local./ Here, you can replace dlinkrouter with a name of your choice.Enter the domain name (optional).Disable to transfer the DNS server information from your ISP to your computers. If enabled, your computers will use the router for a DNS server.Enable or disable the DHCP server.Enter the starting and ending IP addresses for the DHCP server’s IP assignment.Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conict. LAN IP Address:Subnet Mask:Management Link:Local Domain Name:Enable DNS Relay:Status:DHCP IP Address Range:This section will allow you to change the local network settings of the router and to congure the DHCP settings. In the Settings menu on the bar on the top of the page, click Network. Click Advanced Settings... to expand the list and see all of the options.

51D-Link DIR-814 User ManualSection 4 - CongurationDHCP Lease Time:Always Broadcast:UPnP:WAN Port Speed:IPv4 Multicast Stream:IPv6 Multicast Stream:Enter the length of time for the IP address lease in minutes.Enable this feature to broadcast your networks DHCP server to LAN/WLAN clients.Enable or disable Universal Plug and Play (UPnP). UPnP provides compatibility with networking equipment, software and peripherals.You may set the port speed of the Internet port to 10 Mbps, 100 Mbps, 1000 Mbps, or Auto (recommended). Enable to allow IPv4 multicast trac to pass through the router from the Internet.Enable to allow IPv6 multicast trac to pass through the router from the Internet.Click Save when you are done.

52D-Link DIR-814 User ManualSection 4 - CongurationFeaturesQoS EngineThis section will allow you to prioritize particular clients over others, so that those clients receive higher bandwidth. For example, if one client is streaming a movie and another is downloading a non-urgent le, you might wish to assign the former device a higher priority than the latter so that the movie streaming is not disrupted by the trac of the other devices on the network.In the Features menu on the bar on the top of the page, click QoS Engine.Under All Devices, you will see device cards representing each connected client. If some are o-screen, you can use the < and > buttons to scroll through the cards.A maximum of one device can be assigned Highest priority.A maximum of two devices can be assigned High priority.A maximum of eight devices can be assigned Medium priority.If no devices are explicitly assigned a priority, they will all be treated with equal priority. If some devices are not assigned a priority and others are, the unassigned devices will be treated with the lowest priority.To assign a priority level to a device, drag the device card from the All Devices list over an empty slot and release the mouse button. The card will remain in the slot. If you want to remove a priority assignment from a device and return it to the All Devices list, click the cross icon in the top right of the device card.Click Save when you are done.

53D-Link DIR-814 User ManualSection 4 - CongurationFirewall SettingsEnable or disable Demilitarized Zone (DMZ). This completely exposes the client to threats over the Internet, and is not recommended in ordinary situations.If you enabled DMZ, enter the IP address of the client you wish to expose, or use the drop-down menu to quickly select it.Enabling Stateful Packet Inspection (SPI) helps to prevent cyber attacks by validating that the trac passing through the session conforms to the protocol.Enable this feature to protect your network from certain kinds of “spoong” attacks.Enable or disable IPv6 simple security.Enable or disable IPv6 ingress ltering.Allows multiple machines on the LAN to connect to their corporate network using the PPTP protocol.Enable DMZ:DMZ IP Address:Enable SPI IPv4:Enable Anti-Spoof Checking:IPv6 Simple Security:IPv6 Ingress Filtering:PPTP:The router’s rewall protects your network from malicious attacks over the Internet. In the Features menu on the bar on the top of the page, click Firewall Settings. Click Advanced Settings... to expand the list and see all of the options.

54D-Link DIR-814 User ManualSection 4 - CongurationAllows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This Application Level Gateway (ALG) may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try turning this ALG o. Please check with the system administrator of your corporate network whether your VPN client supports NAT traversal.Allows applications that uses Real Time Streaming Protocol (RTSP)to receive streaming media from the Internet.Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG o.Click Save when you are done.IPSec (VPN):RTSP:SIP:

55D-Link DIR-814 User ManualSection 4 - CongurationIPv4/IPv6 RulesEnter a name for the rule.Enter the source IP address range that the rule will apply to, and using the drop-down menu, specify whether it is a WAN or LAN IP address.Enter the destination IP address range that the rule will apply to, and using the drop-down menu, specify whether it is a WAN or LAN IP address.Select the protocol of the trac to allow or deny (Any, TCP, or UDP) and then enter the range of ports that the rule will apply to.Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 64 for more information.Click Apply when you are done.The IPv4/IPv6 Rules section is an advanced option that lets you congure what kind of trac is allowed to pass through the network. To congure the IPv4 rules, from the Firewall Settings page click IPv4 Rules. To congure IPv6 rules, from the Firewall Settings page click IPv6 Rules. To return to the main Firewall Settings page, click Security Check.To begin, use the drop-down menu to select whether you want to ALLOW or DENY the rules you create. You can also choose to turn ltering OFF.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:Name:Source IP Address Range:Destination IP Address Range:Port Range:Schedule:

56D-Link DIR-814 User ManualSection 4 - CongurationPort ForwardingEnter a name for the rule.Enter the IP address of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu.Enter the TCP ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma (for example: 24,1009,3000-4000).Enter the UDP ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma (for example: 24,1009,3000-4000).Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 64 for more information. Click Apply when you are done.Name:Local IP:TCP Port:UDP Port:Schedule:Port forwarding allows you to specify a port or range of ports to open for specic devices on the network. This might be necessary for certain applications to connect through the router. In the Features menu on the bar on the top of the page, click Port Forwarding.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:

57D-Link DIR-814 User ManualSection 4 - CongurationVirtual ServerEnter a name for the rule.Enter the IP address of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu.Select the protocol of the trac to allow or deny (TCP, UDP, Both, or Other).If you entered Other above, enter the protocol number.Enter the public port you want to open.Enter the private port you want to open.Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 64 for more information.Click Apply when you are done.The virtual server allows you to specify a single public port on your router for redirection to an internal LAN IP Address and Private LAN port. To congure the virtual server, from the Port Forwarding page click Virtual Server. To return to the main Port Forwarding page, click Port Forwarding.If you wish to remove a rule, click on its trashcan icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:Name:Local IP:Protocol:Protocol Number:External Port:Internal Port:Schedule:

58D-Link DIR-814 User ManualSection 4 - CongurationWebsite FilterThe website lter settings allow you to block access to certain web sites. You can either create a list of sites to block, or create a list of sites to allow (with all other sites being blocked).In the Features menu on the bar on the top of the page, click Website Filter.If you want to create a list of sites to block, select DENY computers access to ONLY these sites from the drop-down menu. All other sites will be accessible. If you want to specify a list of sites to allow, select ALLOW computers access to ONLY these sites from the drop-down menu. All other sites will be blocked.You may specify a maximum of fteen web sites. To add a new site to the list, click Create New Rule. Next, under Website URL/Domain enter the URL or domain. If you wish to remove a rule, click on its trashcan icon in the Delete column. If you wish to edit a rule, simply replace the URL or domain.Click Save when you are done.

59D-Link DIR-814 User ManualSection 4 - CongurationStatic RoutesEnter a name for the rule.Enter the IP address of packets that will take this route.Enter the netmask of the route.Enter your next hop gateway to be taken if this route is used.The route metric is a value from 1 to 16 that indicates the cost of using this route. A value 1 is the lowest cost and 15 is the highest cost. Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done.The Static Routes section allows you to dene custom routes to control how data trac is moved around your network.In the Features menu on the bar on the top of the page, click Static Routes.To congure IPv6 rules, click IPv6 and refer to page 60. To return to the main IPv4 static routes page, click IPv4.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:Name:Destination Network:Mask:Gateway:Metric:Interface:

60D-Link DIR-814 User ManualSection 4 - CongurationEnter a name for the rule.This is the IP address of the router used to reach the specied destination.Enter the IPv6 address prex length of the packets that will take this route. Enter the metric value for this rule here.Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done.Name:DestNetwork:PrexLen:Metric:Interface:IPv6To congure IPv6 rules, on the Static Routes page click IPv6. To return to the main IPv4 static routes page, click IPv4.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:

61D-Link DIR-814 User ManualSection 4 - CongurationDynamic DNSMost Internet Service Providers (ISPs) assign dynamic (changing) IP addresses. Using a dynamic DNS service provider, people can enter your domain name in their web browser to connect to your server no matter what your IP address is.In the Features menu on the bar on the top of the page, click Dynamic DNS.Enabling dynamic DNS will reveal further conguration options.Displays the current dynamic DNS connection status.Enter the address of your dynamic DNS server, or select one from the drop-down menu.Enter the host name that you registered with your dynamic DNS service provider.Enter your dynamic DNS username.Enter your dynamic DNS password.Enter a timeout time (in hours).Click Save when you are done.Enable Dynamic DNS:Status:Server Address:Host Name:User Name:Password:Time Out:At the bottom of the page are the IPv6 host settings. To congure an IPv6 dynamic DNS host, refer to page 62.

62D-Link DIR-814 User ManualSection 4 - CongurationEnter the host name that you registered with your dynamic DNS service provider.Enter the IPv6 address of the dynamic DNS server. Alternatively, select the server device in the drop-down menu. Click Apply when you are done.Host Name:IPv6 Address:The IPv6 host settings are found at the bottom of the Dynamic DNS page.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:IPv6 Host

63D-Link DIR-814 User ManualSection 4 - CongurationManagementTime & ScheduleTimeThe Time page allows you to congure, update, and maintain the correct time on the internal system clock. From here you can set the time zone, the Network Time Protocol (NTP) server, and enable or disable daylight saving time.In the Management menu on the bar on the top of the page, click Time & Schedule.Select your time zone from the drop-down menu.Displays the current date and time of the router.Enable or disable daylight saving time.Enable or disable to allow an NTP server on the Internet to synchronize the time and date with your router. If you enable this option, select an NTP server from the drop-down menu. To congure the router’stime and date manually, disable this option and use the drop-down menus that appear to input the time and date.Click Save when you are done.Time Zone:Time:Daylight Saving:Update Time Using an NTP Server:To congure and manage your schedules, click Schedule and refer to page 64.

64D-Link DIR-814 User ManualSection 4 - CongurationScheduleSome conguration rules can be set according to a pre-congured schedule. To create, edit, or delete schedules, from the Time page click Schedule. To return to the Time page, click Time. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following screen will appear:First, enter the name of your schedule in the Name eld.Each box represents one hour, with the time at the top of each column. To add a time period to the schedule, simply click on the start hour and drag to the end hour. You can add multiple days to the schedule, but only one period per day.To remove a time period from the schedule, click on the cross icon.Click Apply when you are done.

65D-Link DIR-814 User ManualSection 4 - CongurationSystem LogCheck this box to send the router logs to a SysLog Server. If this is disabled, there will be no other options on this page.Enter the IP address for the Syslog server. If the Syslog server is connected to the router, select it from the drop-down menu to automatically populate the eld. If you want the logs to be automatically sent to an email address, enable this option.Enter the settings for your email account. These are obtained from your email service provider.If email notication is enabled, this option will set the router to send the log by email when the log is fully.This option can be enabled to send an email according to a precongured schedule. See below.If you enable On Schedule is enabled, use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to page 64 for more information.Click Save when you are done.Enable Logging to Syslog Server:Syslog Server IP Address:Enable Email Notication:Send When Log Full:Send On Schedule:Schedule:The router keeps a running log of events. This log can be sent to a Syslog server, and sent to your email address. In the Management menu on the bar on the top of the page, click System Log.

66D-Link DIR-814 User ManualSection 4 - CongurationAdminThis page will allow you to change the administrator (Admin) password and enable remote management.In the Management menu on the bar on the top of the page, click Admin.Enter a new password for the administrator account. You will need to enter this password whenever you congure the router using a web browser.Enables a challenge-response test to require users to type letters or numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your router’s network settings.Check to enable HTTPS to connect to the router securely. Instead of using http://dlinkrouter.local./, you must use https://dlinkrouter.local./ in order to connect to the router.Remote management allows the DIR-814 to be congured from the Internet by a web browser. A password is still required to access the web management interface. The port number used to access the DIR-814 is used in the URL. Example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the DIR-814 and 8080 is the port used for the web management interface. Note: If you enabled HTTPS Server and wish to access the router remotely and securely, you must enter https:// at the beginning of the address.Click Save when you are done.Password:Enable Graphical Authentication (CAPTCHA):Enable HTTPS Server:Enable Remote Management:Remote Admin Port:To load, save, or reset settings, or reboot the router, click System and refer to page 67.

67D-Link DIR-814 User ManualSection 4 - CongurationSystemThis option will save the current router conguration settings to a le on your computer.This option will load a previously saved router conguration le. This will overwrite the router’s current conguration.This option will restore all conguration settings back to the settings that were in eect at the time the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router conguration settings, use the Save Settings To Local Hard Drive button above. Click to reboot the router immediately.You may select Never, Daily, or Weekly.Choose the day of the week to automatically reboot the router.Choose the time of day to automatically reboot the router.Click Save when you are done.Save Settings To Local Hard Drive:Load Settings From Local Hard Drive:Restore To Factory Default Settings:Reboot The Device:Auto Reboot:Day of the week:Time:This page allows you to save the router’s current conguration, load a previously saved conguration, reset the router to its factory default settings, or reboot the router.From the Admin page, click System. To return to the Admin page, click Admin.

68D-Link DIR-814 User ManualSection 4 - CongurationUpgradeThis page will allow you to upgrade the router’s rmware or language pack, either automatically or manually. To manually upgrade the rmware or language pack, you must rst download the relevant le from http://support.dlink.com.In the Management menu on the bar on the top of the page, click Upgrade.The current rmware’s version and date will be displayed.Click this button to prompt the router to automatically check for a new rmware version. If a newer version is found, it will prompt you to install it.If you wish to upgrade manually, rst download the rmware le you wish to upgrade to. Next, click the Upgrade Firmware button and browse to the le to install the new rmware. You can also browse to a language pack le to install a new language pack.Firmware Information:Check for New Firmware:Upgrade Firmware:

69D-Link DIR-814 User ManualSection 4 - CongurationStatisticsOn the Statistics page you can view the amount of packets that pass through the router on the WAN, LAN, and wireless segments.In the Management menu on the bar on the top of the page, click Statistics.You can view the Internet, LAN, Wi-Fi 2.4 GHz, or Wi-Fi 5 GHz by clicking on the respective tabs at the top. The graph will update in real time. To clear the information on the graph, click Clear.The trac counter will reset if the device is rebooted.

70D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless NetworkConnect a Wireless Client to your RouterWPS ButtonStep 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS process).The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-814 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:Step 1 - Press the WPS button on the DIR-814 for about 1 second. The Internet LED on the front will start to blink.Step 3 - Allow up to 1 minute for your connection to be congured. Once the Internet light stops blinking, you will be connected and your wireless connection will be secure with WPA2.WPS Button

71D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless NetworkWindows® 8WPA/WPA2It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used.To join an existing network, locate the wireless network icon in the taskbar next to the time display. Wireless IconClicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name.

72D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless NetworkYou will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to.

73D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless NetworkWindows® 7It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.1. Click on the wireless icon in your system tray (lower-right corner).2. The utility will display any available wireless networks in your area.Wireless IconWPA/WPA2

74D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless Network3. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.4. The following window appears while your computer tries to connect to the router.

75D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless Network5. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. You can also connect by pushing the WPS button on the router.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router.

76D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless NetworkWPSThe WPS feature of the DIR-814 can be congured using Windows® 7. Carry out the following steps to use Windows® 7 to congure the WPS feature:1. Click the Start button and select Computer from the Start menu.2. Click Network on the left side.

77D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless Network3. Double-click the DIR-814.4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next.DIR-814

78D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless Network5. Type a name to identify the network.6. To congure advanced settings, click the icon.Click Next to continue.

79D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless Network7. The following window appears while the Router is being congured. Wait for the conguration to complete.8. The following window informs you that WPS on the router has been set up successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future.9. Click Close to complete WPS setup.

80D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless NetworkWindows Vista®Windows Vista® users may use the built-in wireless utility. If you are using another company’s wireless utility, please refer to the user manual of your wireless adapter for help connecting to a wireless network. Most wireless utilities will have a “site survey” option similar to the Windows Vista® utility as seen below.Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. orThe utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.

81D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless NetworkWPA/WPA2It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect.1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network.

82D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless Network3. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router.

83D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless NetworkWindows® XPWindows® XP users may use the built-in wireless utility (Zero Conguration Utility). The following instructions are for Service Pack 2 users. If you are using another company’s utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below.Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. orThe utility will display any available wireless networks in your area. Click on a Wi-Fi network (displayed using the SSID) and click the Connect button.If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.

84D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless NetworkIt is recommended to enable WPA on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used.2. Highlight the Wi-Fi network (SSID) you would like to connect to and click Connect.1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. WPA/WPA2

85D-Link DIR-814 User ManualSection 5 - Connecting to a Wireless Network3. The Wireless Network Connection box will appear. Enter the WPA-PSK Wi-Fi password and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The Wi-Fi password must be exactly the same as on the wireless router.

86D-Link DIR-814 User ManualSection 6 - TroubleshootingTroubleshootingThis chapter provides solutions to problems that can occur during the installation and operation of the DIR-814. Read the following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a dierent operating system, the screenshots on your computer will look similar to these examples.1. Why can’t I access the web-based conguration utility?When entering the IP address of the D-Link router (192.168.60.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. • Make sure you have an updated Java-enabled web browser. We recommend the following: - Internet Explorer 11 or higher- Firefox 20 or higher- Safari 7 or higher- Chrome 25 or higher• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a dierent cable, or connect to a dierent port on the device if possible. If the computer is turned o, the link light may not be on.• Disable any Internet security software running on the computer. Software rewalls such as ZoneAlarm, BLACKICE, Sygate, Norton Personal Firewall, and Windows® XP rewall may block access to the conguration pages. Check the help les included with your rewall software for more information on disabling or conguring it.

87D-Link DIR-814 User ManualSection 6 - Troubleshooting• Congure your Internet settings:• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.• Close your web browser (if open) and open it.• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. • If you still cannot access the conguration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the conguration. If you have multiple computers, try connecting using a dierent computer.2. What can I do if I forgot my password?If you forgot your password, you must reset your router. This process will change all your settings back to the factory defaults.To reset the router, locate the reset button (hole) on the bottom panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.60.1. When logging in, leave the password box empty.

88D-Link DIR-814 User ManualSection 6 - Troubleshooting3. Why can’t I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To nd the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be another computer, or a URL. • Click on Start and then click Run. • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472

89D-Link DIR-814 User ManualSection 6 - TroubleshootingYou should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480). Once you nd your MTU, you can now congure your router with the proper MTU size. To change the MTU rate on your router follow the steps below: • Open your browser, enter the IP address of your router (192.168.60.1) and click OK. • Enter your username (admin) and password (blank by default). Click OK to enter the web conguration page for the device. • Click on Setup and then click Manual Congure.• To change the MTU, enter the number in the MTU eld and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten.

90D-Link DIR-814 User ManualAppendix A - Wireless BasicsD-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers.A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and oce environments, and public areas such as airports, coee shops and universities. Innovative ways to utilize WLAN technology are helping people work, and communicate more eciently. Increased mobility and the absence of cabling and other xed infrastructure have proven to be benecial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link.Wireless Basics

91D-Link DIR-814 User ManualAppendix A - Wireless BasicsWhat is Wireless?Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home or oce network.Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can aord. D-Link has all the products you need to build your network.How does wireless work? Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two dierent types of wireless networksl: Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN).Wireless Local Area Network (WLAN)In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, university and high school campuses, airports, golf courses, and many other outdoor venues.

92D-Link DIR-814 User ManualAppendix A - Wireless BasicsWireless Personal Area Network (WPAN)Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away.Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power. This makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries.Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, oce, business, D-Link has a wireless solution for it.Home Uses/Benets • Gives everyone at home broadband access • Surf the web, check email, instant message, etc. • Gets rid of the cables around the house • Simple and easy to use Small Oce and Home Oce Uses/Benets • Stay on top of everything at home as you would at oce • Remotely access your oce network from home • Share Internet connection and printer with multiple computers • No need to dedicate oce space

93D-Link DIR-814 User ManualAppendix A - Wireless BasicsWhere is wireless used? Wireless technology is expanding everywhere, not just at home or oce. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.Using a D-Link CardBus adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coee shops, libraries, restaurants, and convention centers.Wireless network is easy to setup, but if you’re installing it for the rst time it could be quite a task not knowing where to start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.TipsHere are a few things to keep in mind, when you install a wireless network.Centralize your router or access pointMake sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range.Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would signicantly reduce any interference that the appliances might cause since they operate on same frequency.Security

94D-Link DIR-814 User ManualAppendix A - Wireless BasicsDon’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to the product manual for detail information on how to set it up. There are basically two modes of networking: • Infrastructure – All wireless clients will connect to an access point or wireless router.• Ad-hoc – Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DIR-814 wireless network CardBus adapters.An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-hoc network contains only clients, such as laptops with wireless CardBus adapters. All the adapters must be in Ad-hoc mode to communicate.Wireless Modes

95D-Link DIR-814 User ManualAppendix B - Networking BasicsNetworking BasicsCheck your IP addressAfter you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start Search box.)At the prompt, type ipcong and press Enter.This will display the IP address, subnet mask, and the default gateway of your adapter.If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some rewall software programs may block a DHCP request on newly installed adapters.

96D-Link DIR-814 User ManualAppendix B - Networking BasicsStatically Assign an IP addressIf you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:Step 1Windows® 7 - Click on Start > Control Panel > Network and Internet > Network and Sharing Center.Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.Windows® XP - Click on Start > Control Panel > Network Connections.Windows® 2000 - From the desktop, right-click My Network Places > Properties.Step 2Right-click on the Local Area Connection which represents your network adapter and select Properties.Step 3Highlight Internet Protocol (TCP/IP) and click Properties.Step 4Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the router´s LAN IP address is 192.168.60.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router (I.E. 192.168.60.1). Set Primary DNS the same as the LAN IP address of your router (192.168.60.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP.Step 5Click OK twice to save your settings.

97D-Link DIR-814 User ManualAppendix B - Networking BasicsWireless SecurityThis section will show you the dierent levels of security you can use to protect your data from intruders. The DIR-814 oers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK (Pre-Shared Key) • WPA (Wi-Fi Protected Access) • WPA-PSK (Pre-Shared Key)What is WPA?WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). The 2 major improvements over WEP: • Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and by adding an integrity-checking feature, ensures that the keys haven’t been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP.• User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computer’s hardware-specic MAC address, which is relatively simple to be snied out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network.WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point.WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network.

98D-Link DIR-814 User ManualAppendix C - Technical SpecicationsTechnical SpecicationsHardware Specications• LAN Interface: Four 10/100 Mbps LAN ports• WAN Interface: One 10/100 Mbps Internet port• Wireless Interface (2.4 GHz): IEEE 802.11b/g/n• Wireless Interface (5 GHz): IEEE 802.11 ac/n/aOperating Voltage• Input: 100~240 V AC, 50~60 Hz• Output: 12V DC, 1.5ATemperature• Operating: 32 ~ 104 oF (0 ~ 40 oC)• Non-Operating: -4 ~ 149 oF (-20 ~ 65 oC)Humidity• Operating: 10% - 90% non-condensing• Non-Operating: 5% - 95% non-condensingWireless Frequency Range• IEEE 802.11a: 5150 MHz~5250 MHz, 5725 MHz~5850 MHz• IEEE 802.11b: 2412 MHz~2462 MHz• IEEE 802.11g: 2412 MHz~2462 MHz• IEEE 802.11n: 2412 MHz~2462 MHz, 5150 MHz~5250 MHz, 5725 MHz~5850 MHz• IEEE 802.11ac: 5150 MHz~5250 MHz, 5725 MHz~5850 MHzWireless Bandwidth Rate• IEEE 802.11a: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps• IEEE 802.11b: 11, 5.5, 2, and 1 Mbps• IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps• IEEE 802.11n: 6.5 to 300 Mbps• IEEE 802.11ac: 6.5 to 433 MbpsAntenna Type• Three external antennas Wireless Security• 64/128bit WEP, WPA/WPA2-Personal, WPS-PBCCertications• BSMI• NCC• FCC• D-Link Green Dimensions & Weight• 189.95 x 149.75 x 38.11 mm (7.48 x 5.90 x 1.50 inches)• 227.8 grams (8.03 ounces)

99D-Link DIR-814 User Manual 99Appendix D - Safety StatementsSafety StatementsFederal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.Non-modications Statement:Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.Caution:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.NoteThe country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be xed to USA operational channels only.

100D-Link DIR-814 User Manual 100Appendix D - Safety StatementsRF Frequency RequirementsThis device is for indoor use only when using all channels in the 5.150 to 5.250 GHz frequency range. High power radars are allocated as primary users of the 5.150 to 5.250 GHz bands. These radar stations can cause interference with and/or damage this device.It is restricted to indoor environments only.IMPORTANT NOTICE:FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.

101D-Link DIR-814 User Manual 101Appendix D - Safety Statements以下警語適用台灣地區本產品符合低功率電波輻射性電機管理辦法：第十二條經形式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方的繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。無線傳輸設備 (UNII)無線資訊傳輸設備忍受合法通信之干擾且不得干擾合法通信；如造成干擾，應立即停用，俟無干擾之虞，始得繼續使用。無線資訊傳設備的製造廠商應確保頻率穩定性，如依製造廠商使用手冊上所述正常操作，發射的信號應維持於操作頻帶中。電磁波曝露量MPE標準值(MPE) 1 mW/cm2，送測產品實值為mW/cm2NCC 警語：

102D-Link DIR-814 User Manual 102Appendix D - Safety StatementsSafety InstructionsPlease adhere to the following safety guidelines to help ensure your own personal safety and protect your system from potential damage. Any acts taken that are inconsistent with ordinary use of the product, including improper testing, etc., and those not expressly approved by D-Link may result in the loss of product warranty.Unless expressly approved by an authorized representative of D-Link in writing, you may not and may not permit others to:• Disassemble or reverse engineer the device or attempt to derive source code (underlying ideas, algorithms, or structure) from the device or from any other information provided by D-Link, except to the extent that this restriction is expressly prohibited by local law.• Modify or alter the device.• Remove from the device any product identication or other notices, including copyright notices and patent markings, if any.To reduce the risk of bodily injury, electrical shock, re, and damage to the device and other equipment, observe the following precautions:Power Sources• Observe and follow service markings.• Do not push any objects into the openings of your device unless consistent with the authorized operation of the device. Doing so can cause a re or an electrical shock by shorting out interior components.• The powering of this device must adhere to the power specications indicated for this product.• Do not overload wall outlets and/or extension cords as this will increase the risk of re or electrical shock.• Do not rest anything on the power cord or on the device (unless the device is made and expressly approved as suitable for stacking).• Position system cables and power cables carefully; route cables so that they cannot be stepped on or tripped over. Be sure that nothing rests on any cables.• Operate the device only from the type of external power source indicated on the electrical ratings label.• To help avoid damaging your device, be sure the voltage selection switch (if provided) on the power supply is set to match the power available at your location.• Also be sure that attached devices are electrically rated to operate with the power available in your location.

103D-Link DIR-814 User Manual 103Appendix D - Safety Statements• Use only approved power cable(s). If you have not been provided a power cable for your device or for any AC -powered option intended for your device, purchase a power cable that is approved for use in your country and is suitable for use with your device. The power cable must be rated for the device and for the voltage and current marked on the device's electrical ratings label. The voltage and current rating of the cable should be greater than the ratings marked on the device.• To help prevent an electrical shock, plug the device and peripheral power cables into properly grounded electrical outlets. These cables are equipped with three-prong plugs to help ensure proper grounding. Do not use adapter plugs or remove the grounding prong from a cable. If you must use an extension cable, use a 3-wire cable with properly grounded plugs.• Observe extension cable and power strip ratings. Ensure that the total ampere rating of all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip.• To help protect your device from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).• Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modications. Always follow your local/national wiring rules.• When connecting or disconnecting power to hot-pluggable power supplies, if oered with your device, observe the following guidelines.• Install the power supply before connecting the power cable to the power supply.• Unplug the power cable before removing the power supply.• If the system has multiple sources of power, disconnect power from the device by unplugging all power cables from the power supplies.Servicing/Disassembling• Do not service any product except as expressly set forth in your system documentation.• Opening or removing covers that are marked with the triangular symbol with a lightning bolt may expose you to an electrical shock. Only a trained service technician should service components inside these compartments.• To reduce the risk of electrical shock, never disassemble this device. None of its internal parts are user-replaceable; therefore, there is no reason to access the interior.• Do not spill food or liquids on your system components, and never operate the device in a wet environment. If the device gets wet, see the appropriate section in your troubleshooting guide or contact your trained service provider.• Use the device only with approved equipment.

104D-Link DIR-814 User Manual 104Appendix D - Safety Statements• Move products with care; ensure that all casters and/or stabilizers are rmly connected to the system. Avoid sudden stops and uneven surfaces.Environment• Do not use this device near water (e.g. near a bathtub, sink, laundry tub, sh tank, in a wet basement or near a swimming pool).• Do not use this device in areas with high humidity.• This device must not be subjected to water or condensation.• Keep your device away from radiators and heat sources. Also, do not block cooling vents.Cleaning• Always unplug the power before cleaning this device.• Do not use liquid or aerosol cleaners of any kind. Use only compressed air that is recommended for electronic devices.• Use a dry cloth for cleaning.Protecting Against Electrostatic DischargeStatic electricity can harm delicate components inside your system. To prevent static damage, discharge static electricity from your body before you touch any of the electronic components, such as the microprocessor. You can do so by periodically touching an unpainted metal surface on the chassis.You can also take the following steps to help prevent damage from electrostatic discharge (ESD):1. When unpacking a static-sensitive component from its shipping carton, do not remove the component from the antistatic packing material until you are ready to install the component in your system. Just before unwrapping the antistatic packaging, be sure to discharge static electricity from your body.2. When transporting a sensitive component, rst place it in an antistatic container or packaging.3. Handle all sensitive components in a static-safe area. If possible, use antistatic oor pads, workbench pads, and an antistatic grounding strap.EnvironmentalThis product may contain a battery. Recycle or dispose of batteries in accordance with the battery manufacturer's instructions and local/national disposal and recycling regulations. For more information, please refer to the warranty guide.

Navigation menu

Upload a User Manual

Namespaces

Wiki Guide
HTML
PDF
Info

Views

User Manual
Discussion / Help

Navigation

© 2024 UserManual.wiki | Privacy Policy

Contact Us
DMCA