D Link IR853A1 AC1300 MU-MIMO Wi-Fi Gigabit Router User Manual rev

D-Link Corporation AC1300 MU-MIMO Wi-Fi Gigabit Router Users Manual rev

User Manual

Version 1.00| 2017/08/31User ManualDIR-853AC1300 Wi-Fi Gigabit Router
iD-Link DIR-853 User ManualD-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.Manual RevisionsTrademarksD-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries. App StoreSM is a service mark of Apple Inc.Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc.Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.Copyright © 2017 by D-Link Corporation, Inc.All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc.Power UsageThis device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned o through a power switch to save energy when it is not needed.Network Standby: 4.87 wattsSwitched O: 0.06 wattsPrefaceRevision Date Description1.00 August 31, 2017 Initial A1 release
iiD-Link DIR-853 User ManualTable of ContentsTable of ContentsProduct Overview ..............................................................1Package Contents .........................................................................1System Requirements ................................................................. 2Introduction ................................................................................... 3Features ............................................................................................5Hardware Overview .....................................................................6LED Indicators ........................................................................6Back Panel ...............................................................................7Front Panel ..............................................................................8Installation ......................................................................... 9Before you Begin ...........................................................................9Wireless Installation Considerations ....................................10Hardware Setup ..........................................................................11Completing Setup ......................................................................14QRS Mobile App ..................................................................15Setup Wizard ........................................................................20Conguration ...................................................................24Home ..............................................................................................25Internet ................................................................................... 25DIR-882 ...................................................................................26Connected Clients ..............................................................27USB Device ............................................................................28Settings ..........................................................................................29Wizard .....................................................................................29Internet ................................................................................... 29IPv6 .....................................................................................39VLAN ...................................................................................59Wireless ..................................................................................61Guest Zone .......................................................................64Network .................................................................................. 65USB Sharing ..........................................................................67Features ..........................................................................................68QoS Engine............................................................................68Firewall ...................................................................................69IPv4/IPv6 Rules ...............................................................71Port Forwarding ..................................................................72Virtual Server ...................................................................73Website Filter ........................................................................74Static Routes .........................................................................75IPv6 .....................................................................................76Dynamic DNS .......................................................................77IPv6 Host ...........................................................................78Quick VPN ..............................................................................79Management ................................................................................ 81Time & Schedule .................................................................81Time ....................................................................................81Schedule ...........................................................................82System Log ............................................................................83System Admin ......................................................................85System ...............................................................................86User & Device .......................................................................87User .....................................................................................87Device ................................................................................89
iiiD-Link DIR-853 User ManualTable of ContentsUpgrade .................................................................................90Statistics .................................................................................91Quick VPN .........................................................................92Important Information .............................................................93Quick VPN Server Setup Instructions ..................................94iOS Devices ...................................................................................95Mac OS X ........................................................................................99Windows 7 .................................................................................. 102Windows 8.1/8 .......................................................................... 106Windows 10 ............................................................................... 112Android .......................................................................................115Connect a Wireless Client to your Router ....................119WPS Button ................................................................................ 119Windows® 10 ............................................................................. 120Windows® 8 ................................................................................ 122WPA/WPA2 ......................................................................... 122Windows® 7 ................................................................................ 124WPA/WPA2 ......................................................................... 124WPS ....................................................................................... 127Windows Vista® ......................................................................... 131WPA/WPA2 ......................................................................... 132Troubleshooting ............................................................134Wireless Basics ...............................................................138What is Wireless? ......................................................................139Tips ................................................................................................141Wireless Modes ......................................................................... 142Networking Basics .........................................................143Check your IP address ............................................................ 143Statically Assign an IP address ............................................ 144Wireless Security ......................................................... 145What is WPA? ................................................................ 145Technical Specications ................................................146Regulatory Statements .................................................147
1D-Link DIR-853 User ManualSection 1 - Product OverviewProduct OverviewPackage ContentsNote: Using a power supply with a dierent voltage rating than the one included with the DIR-853 will cause damage and void the warranty for this product.If any of the above items are missing or damaged, please contact your local reseller.DIR-853 Ethernet CablePower AdapterQuick Installation Guide:L)L&RQ¿JXUDWLRQ1RWH Wi-Fi Conguration Card
2D-Link DIR-853 User ManualSection 1 - Product OverviewNetwork Requirements• An Ethernet-based cable or DSL modem• IEEE 802.11ac/n/g/b/a wireless clients• 10/100/1000 EthernetWeb-based Conguration Utility RequirementsComputer with the following:• Windows®, Macintosh, or Linux-based operating system • An installed Ethernet adapterBrowser Requirements:• Internet Explorer 10 or higher• Firefox 28 or higher• Safari 6 or higher• Chrome 28 or higherWindows® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version.QRS Mobile Requirements• iPhone®/iPad®/iPod Touch®, Android™, or Windows smartphone or tablet. (Please refer to the mobile app's store page to check whether your device is compatible)System Requirements
3D-Link DIR-853 User ManualSection 1 - Product OverviewIntroductionThe D-Link DIR-853 AC1300 Wi-Fi Gigabit Router shares your Internet connection over a blazing-fast Gigabit Wireless AC connection of up to 2600 Mbps (Up to 1723 Mbps 5 GHz Wireless AC and up to 800 Mbps 2.4 GHz Wireless N)1, using advanced AC beamforming technology to signicantly outperform 802.11n and other 802.11ac devices. Equipped with one Gigabit WAN/Internet port and four Gigabit LAN ports to provide wired speeds of up to 10 times faster than standard 10/100 ports, the DIR-853 creates the best networking experience to date.Featuring four antennas and a 4 x 4 Multiple In Multiple Out (MIMO) antenna conguration, the DIR-853 oers better data rates, fewer dead-spots, more coverage, and higher reliability. Operating exclusively in the 5 GHz band, the DIR-853's 802.11ac wireless connections avoid the crowded 2.4 GHz band, allowing you faster speeds while still maintaining backwards compatibility with older 802.11n/g/b devices. The DIR-853 prepares your home to become a Connected Home by bringing Wi-Fi to places your old signal can’t reach. A stronger Wi-Fi signal means you can install more wireless surveillance cameras, baby monitors, sensors, and alarms in the places where you need them.The DIR-853's Smart Connect Technology makes connecting to wireless networks easy by eliminating the confusion of multiple networks. Ever since the introduction of 5 GHz multi-band wireless technology, users have had to guess whether the 5 GHz or 2.4 GHz band network would provide them with better range and speed. Smart Connect simplies this by only presenting a single wireless network for you to connect to. Behind the scenes, when a connection is initiated, the DIR-853's advanced algorithms determine the best band for your device to connect to, automatically distributing devices to the optimal band, thereby ensuring a faster, more reliable, and hassle-free experience for all of your users and devices.This router is equipped with D-Link's Quick VPN technology. Using Quick VPN allows you to securely connect your computer or mobile device to places with free, untrusted Wi-Fi hotspots by encrypting and relaying your connection through your home Internet connection. This extra 'hop' reduces the chances of hackers stealing your information, such as logins, passwords, and credit card numbers. When traveling, Quick VPN lets you watch sports and use video streaming services without experiencing blackouts or ltering. You can surf the whole Internet unltered and unblocked, just as you would at home.
4D-Link DIR-853 User ManualSection 1 - Product OverviewThe DIR-853 supports the latest wireless security features to help prevent unauthorized access, be it from over a wireless network or the Internet. Support for WPA™ and WPA2™ standards ensure that you will be able to use the best possible encryption regardless of your client devices. In addition, this router is equipped with a dual-active rewall (SPI and NAT) to help prevent potential attacks over the Internet.The DIR-853 AC1300 Wi-Fi Gigabit Router provides incredible speeds, smart antenna technology, fast ports, cloud features, and advanced security features. It also features an innovative design and easy installation options.1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and 802.11ac specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Introduction (continued)
5D-Link DIR-853 User ManualSection 1 - Product Overview• Superior Wireless Networking - The DIR-853 provides Gigabit wireless speeds of up to a combined 2600 Mbps (1732 Mbps 802.11ac 5 GHz, plus 800 Mbps 802.11n 2.4 GHz)1. This capability rivals wired connections, allowing users to participate in real-time activities online, such as HD video communication, online gaming, and use mobile devices from anywhere in your home while still oering full 802.11n/g/b backward compatibility.• Extreme Wired LAN and WAN Networking - With four 10/100/1000 Gigabit Ethernet LAN ports, and a 10/100/1000 Gigabit Ethernet WAN port, the DIR-853 has an enormous amount of bandwidth to take full advantage of the highest speed broadband connections available. IPv6 Support - The DIR-853 fully supports IPv6 and includes support for a variety of IPv6 connection types including: SLAAC/DHCPv6, 6to4, 6rd, Static IPv6, IPv6 PPPoE, IPv6 in IPv4 tunneling, and local connectivity.• Smart Connect - Creates a 'single' wireless network for your devices to connect to. Behind the scenes, the DIR-853 automatically determines whether to connect a device to the 2.4 or 5 GHz band, thereby providing the best speed and range for each device and optimally distributing devices to each network.• Advanced Firewall Features - The web-based user interface displays a number of advanced network management features. Easily apply content ltering based on MAC address, URL, and/or domain name. Schedule these lters to be active on certain days or for a duration of hours or minutes.• Encrypted Multiple/Concurrent Sessions - The DIR-853 can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-853 can access corporate networks through encrypted channels.• User-friendly Setup Wizard - Through its easy-to-use web-based user interface or QRS Mobile (Quick Router Setup) App, the DIR-853 lets you quickly congure and secure your router to your specic settings in minutes. 1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and 802.11ac specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.Features
6D-Link DIR-853 User ManualSection 1 - Product OverviewHardware OverviewLED Indicators1 Power LED A solid light indicates a proper connection to the power supply. The light will be solid orange during boot up.2 Internet LED A solid light indicates a connection on the Internet port. If the LED is orange, the router cannot connect to the Internet.3 Wireless (2.4 GHz LED) A solid light indicates that the 2.4 GHz wireless band is enabled.4 Wireless (5 GHz LED) A solid light indicates that the 5 GHz wireless band is enabled.5 Super Speed USB LED A solid green light indicates a USB storage device is connected to the USB 3.0 port on the front of the router.6 USB LED A solid green light indicates a USB storage device is connected to the USB 2.0 port on the back of the router.3 54 621
7D-Link DIR-853 User ManualSection 1 - Product OverviewHardware OverviewBack PanelGigabit LAN Ports (1- 4) Connect Ethernet devices such as computers, switches, storage (NAS) devices, and game consoles.Gigabit WAN Port Using an Ethernet cable, connect your broadband modem to this port.Reset Button Insert a paperclip in the hole, wait for 10 seconds, and release to reset the router to default settings.WPS Button Press to start the WPS process and automatically create an encrypted connection to a WPS client.Wi-Fi Button Press this button turn o or turn on the wireless networks.Power Connector Connector for the supplied power adapter.Power Button Press the power button to power the device on or o.- Product OverviewBack Panel
8D-Link DIR-853 User ManualSection 1 - Product OverviewFront Panel1 USB 3.0 Port Connect a USB storage device to share les over the network.rviewFront Panel
9D-Link DIR-853 User ManualSection 3 - InstallationBefore you Begin• Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, attic, or garage. • Congure the router with the computer that was last connected directly to your Internet connection. Verify that it is connected to the Internet before connecting additional devices.• If your ISP provided you with a modem/router combo, you will need to set it to “bridge” mode so the router can work properly. Please contact your ISP or refer to the user manual for your modem/router device. • You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn o your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your Internet Service Provider (ISP) to change connection types (USB to Ethernet). • If connecting to a DSL modem, make sure to have your DSL service information provided by your Internet Service Provider handy. This information is likely to include your DSL account's Username and Password. Your ISP may also supply you with additional WAN conguration settings which might be necessary to establish a connection. • If you are connecting a considerable amount of networking equipment, it may be a good idea to take the time to label each cable or take a picture of your existing setup before making any changes. • If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoET, BroadJump, or EnterNet 300 from your computer or you will not be able to connect to the Internet.This section will walk you through the installation of the DIR-853. Installation
10D-Link DIR-853 User ManualSection 3 - InstallationWireless Installation ConsiderationsThe D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building materials make a dierence. A solid metal door or aluminum studs may have a negative eect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use.
11D-Link DIR-853 User ManualSection 3 - Installation2. Position your DIR-853 near your Internet-connected modem. Place it in an open area for better wireless coverage.1. The DIR-853 is designed to give you the fastest, most stable network connection possible. In order to maximize performance, fully extend the antennas into a 105 degree angle to provide optimal wireless coverage. Keep the router in an open area for better wireless coverage. 3. Turn o and unplug the power and Ethernet cable to your cable or DSL broadband modem. This is required. In some cases, you may need to turn it o for up to ve minutes.DIR-853 ModemDIR-853 ModemHardware Setup105˚
12D-Link DIR-853 User ManualSection 3 - Installation5. Turn on or plug your modem back in and wait approximately one minute before proceeding onward.6. Connect the supplied power adapter to the router and a power outlet, press the power button, and wait approximately one minute until the LED indicator on the front of the device changes from orange to solid white.DIR-853Modem4. Use the included Ethernet cable to connect your modem to the yellow port labeled INTERNET on the router.DIR-853Modem Note: This unit is to be used with power supply model S36B52-120A250-04.DIR-853Modem
13D-Link DIR-853 User ManualSection 3 - Installation If you are conguring the DIR-853 from a PC with a wired Ethernet connection, plug one end of an Ethernet cable into the port labeled 1 on the back of the router, and the other end into the Ethernet port on your computer.:L)L&RQ¿JXUDWLRQ1RWHDIR-853Modem7. If you are conguring the DIR-853 wirelessly from a PC, connect to a Wi-Fi network printed on the included Wi-Fi Conguration Card. You can also nd the Wi-Fi network names and passwords printed on the label attached to the bottom your router.DIR-853Modem8. If you are connecting to a broadband service that uses a dynamic connection (not PPPoE), you may be online already. Try opening a web browser and connecting to a website. If the website does not load, proceed to Completing Setup on page 14.
14D-Link DIR-853 User ManualSection 3 - InstallationCompleting SetupThere are several dierent ways you can congure your router to connect to the Internet and connect to your clients:• QRS Mobile App - Use your Android device, iPhone, iPad, or iPod touch to congure your router. Refer to QRS Mobile App on page 15.• D-Link Setup Wizard - This wizard will launch when you log into the router for the rst time. Refer to Setup Wizard on page 20.• Manual Setup - Log in to the router and manually congure your router. Refer to Conguration on page 24.
15D-Link DIR-853 User ManualSection 3 - InstallationQRS Mobile AppThe QRS Mobile app allows you to install and congure your router from your mobile device.Note: The screenshots may be dierent depending on your mobile device’s OS version. Step 1Search for the free QRS Mobile App on the App Store or Google Play.Step 2Once your app is installed, you may now congure your router. Connect to the router wirelessly by going to your wireless utility on your device. Scan for the Wi-Fi name (SSID) as listed on the supplied info card. Select and then enter your Wi-Fi password.Step 3Once you connect to the router, launch the QRS Mobile app from the Home screen of your device.Note: The following steps show the Android interface of the QRS Mobile app. If you are using an iPhone, iPad, or iPod touch, the appearance may be dierent to that of the screenshots, but the process is the same. QRS Mobile
16D-Link DIR-853 User ManualSection 3 - InstallationStep 4You will see the welcome screen. Tap Start to proceed, then enter your device password and tap Log In. Tap Next once the Operation Mode screen appears.Step 5At this point, please ensure that your router is connected to a modem. Plug one end of the provided Ethernet cable into your DSL or cable modem, and plug the other end into the port marked INTERNET on the DIR-853. Tap Next to automatically detect your Internet connection and proceed to the next step.QRS Mobile App (continued)
17D-Link DIR-853 User ManualSection 3 - InstallationStep 7Enter the administrator password of your choice. Unlike the Wi-Fi password, this password is only required when you need to congure the router. See Conguration on page 24 for details of when this password is used. Tap Next to proceed.Step 6You will be asked to congure your 2.4 GHz wireless network. Enter a network name (SSID) of your choice, or leave it unchanged to accept the default SSID. Next, choose a Wi-Fi password of at least 8 characters. Any device trying to connect to the router wirelessly will need to enter this password the rst time it connects.Tap Next to congure your 5 GHz wireless network. When satised, tap Next to proceed.QRS Mobile App (continued)
18D-Link DIR-853 User ManualSection 3 - InstallationStep 8If you wish to receive push notications whenever a new rmware update is available, check the Notify me when new rmware is available box and tap Next.Otherwise, just tap Next to proceed.Step 9You will be presented with a summary of your chosen settings. Tap Save to complete the setup.QRS Mobile App (continued)
19D-Link DIR-853 User ManualSection 3 - InstallationCongratulations, your device has been successfully congured! You can share this information by tapping Share By E-mail, or tap Finish to exit the app.QRS Mobile App (continued)
20D-Link DIR-853 User ManualSection 3 - InstallationThe wizard is designed to guide you through a step-by-step process to congure your new D-Link router and connect to the Internet.Click Next to continue. Setup WizardIf this is your rst time installing the router, open your web browser and enter http://dlinkrouter.local./ in the address bar. Alternatively, enter the IP address of the router (default: http://192.168.0.1). Please wait while your router detects your Internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password.If the router does not detect a valid Internet connection, a list of connection types to choose from will be displayed.Select your Internet connection type (this information can be obtained from your Internet Service Provider) and click Next to continue.
21D-Link DIR-853 User ManualSection 3 - InstallationIf the router detected or you selected PPPoE, enter your PPPoE username and password and click Next to continue. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. Setup Wizard (continued)
22D-Link DIR-853 User ManualSection 3 - InstallationCreate a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have this passphrase or key entered to be able to connect to your wireless network.Click Next to continue.Note: The DIR-853's Smart Connect feature presents a single wireless network. When connecting clients to an extension network, they will be automatically added to the best band, either 2.4 GHz or 5 GHz. To disable the Smart Connect feature and individually congure 2.4 GHz and 5 GHz networks, refer to Wireless on page 61.In order to secure the router, please enter a new password. You will be prompted for this password every time you want to use the router’s web conguration utility. Click Next to continue.Setup Wizard (continued)
23D-Link DIR-853 User ManualSection 3 - InstallationYou will be presented with a summary of your settings. Click Next to nalize the settings or Back to make changes.At the end of the wizard, you will be presented with a nal summary of your settings. Click Finish to close the wizard.Congratulations, your device has been successfully congured! Setup Wizard (continued)
24D-Link DIR-853 User ManualSection 4 - CongurationCongurationEnter your password. If you previously followed the setup wizard, please use the admin password you entered during the wizard. Otherwise, leave the password blank. Click Log In to proceed.Note: If you cannot remember your password and cannot log in, press the reset/wps button on the back of the device for longer than 10 seconds to restore the router to its default settings.To access the conguration utility, open a web-browser such as Internet Explorer and enter http://dlinkrouter.local./ or you may also connect by typing the IP address of the router (by default this is http://192.168.0.1) in the address bar.The router’s home page will open displaying its current connection status.The bar at the top of the page has quick access to Settings and Management functions. You may quickly jump back Home at any time.Note: The system will automatically log out after a period of inactivity.
25D-Link DIR-853 User ManualSection 4 - CongurationHomeThe Home page displays the current status of the router in the form of an interactive diagram. You can click each icon to display information about each part of the network at the bottom of the screen. The menu bar at the top of the page will allow you to quickly navigate to other pages. The Home page displays whether or not the router is currently connected to the Internet. If it is disconnected, click Click to repair to bring up the setup wizard, refer to Setup Wizard on page 20 for more information.To bring up more details about your Internet connection, click on the Internet icon. Click IPv4 or IPv6 to see details of the IPv4 connection and IPv6 connection respectively.Click Release IP Address to disconnect from the Internet. If you do this and wish to reconnect, click Renew.To recongure the Internet settings, refer to Internet on page 29.Internet
26D-Link DIR-853 User ManualSection 4 - CongurationDIR-853Click on the DIR-853 icon to view details about the router and its wireless settings.Here you can see the router’s current Wi-Fi network name and password, as well as the router's MAC address, IPv4 address, and IPv6 address.To recongure the network settings, either click Go to settings on the lower left, or click Settings (at the top of the page) and then Network on the menu that appears. Refer to Network on page 65 for more information.To recongure the wireless settings, either click Go to settings, on the lower right, or click Settings (at the top of the page) and then Wireless on the menu that appears. Refer to Wireless on page 61 for more information.
27D-Link DIR-853 User ManualSection 4 - CongurationConnected ClientsClick on the Connected Clients icon to view details about the router and its wireless settings.On this page you can see all the clients currently connected to the router, and their IP addresses.To edit each client’s settings, click the pencil icon on the client you want to edit.Name: Enter a custom name for this client.Vendor: Displays the vendor of the device.MAC Address: Displays the MAC address of the device.IP Address: Displays the current IP address of this client.Reserve IP: Enable to reserve this IP address for this client.IP Address (Reserved):Specify an IP address for the DIR-853's DHCP server to assign.Parental Control: Allow or Block access to the router.Click Save when you are done.
28D-Link DIR-853 User ManualSection 4 - CongurationUSB DeviceClick on the USB Device icon to view details about the currently connected USB storage device, DLNA media server, Windows File Sharing, and FTP.If you have a USB device connected, you can see its name and how much free space it has. To recongure the USB sharing settings, either click Go to settings on the lower right, or click Settings (at the top of the page) and then USB Sharing on the menu that appears. Refer to USB Sharing on page 67 for more information.
29D-Link DIR-853 User ManualSection 4 - CongurationSettingsWizardInternetIn the Settings menu on the bar on the top of the page, click Wizard to open the setup wizard. This is the same wizard that appears when you start the router for the rst time. Refer to Setup Wizard on page 20 for details.In the Settings menu on the bar on the top of the page, click Internet to see the Internet conguration options.For Dynamic IP (DHCP) refer to page 30.For Static IP refer to page 31.For PPPoE refer to page 32.For PPTP refer to page 34.For L2TP refer to page 36.For DS-Lite refer to page 38.To congure an IPv6 connection, click the IPv6 link. Refer to page 39.My Internet Connection Is:Choose your Internet connection type from the drop-down menu. You will be presented with the appropriate options for your connection type. Click Advanced Settings... to expand the list and see all of the options.
30D-Link DIR-853 User ManualSection 4 - CongurationDynamic IP (DHCP)Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP does not specify an IP address to use.Advanced SettingsHost Name: The host name is optional but may be required by some ISPs. Leave it blank if you are not sure.Primary DNS Server:Enter the primary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP.Secondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP.MAC Address Clone:The default MAC address is set to the Internet port’s physical interface MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client.Click Save when you are done.
31D-Link DIR-853 User ManualSection 4 - CongurationStatic IPSelect Static IP if your IP information is provided by your Internet Service Provider (ISP).IP Address: Enter the IP address provided by your ISP.Subnet Mask: Enter the subnet mask provided by your ISP.Default Gateway: Enter the default gateway address provided by your ISP.Primary DNS Server:Enter the primary DNS server IP address assigned by your ISP.Advanced SettingsSecondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto.MAC Address Clone:The default MAC address is set to the Internet port’s physical interface MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client.Click Save when you are done.
32D-Link DIR-853 User ManualSection 4 - CongurationPPPoESelect PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet.Username: Enter the username provided by your ISP.Password: Enter the password provided by your ISP.Reconnect Mode: Select either Always on, On Demand, or Manual.Maximum Idle Time:Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode.Advanced SettingsAddress Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP.Dynamic IPService Name: Enter the ISP service name (optional).Primary DNS Server:Enter the primary DNS server IP address assigned by your ISP.Secondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto.
33D-Link DIR-853 User ManualSection 4 - CongurationMAC Address Clone:The default MAC address is set to the Internet port’s physical interface MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client.Static IPIP Address: Enter the IP address provided by your ISP.Service Name: Enter the ISP service name (optional).Primary DNS Server:Enter the primary DNS server IP address assigned by your ISP.Secondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto.MAC Address Clone:The default MAC address is set to the Internet port’s physical interface MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client.Click Save when you are done.PPPoE (continued)
34D-Link DIR-853 User ManualSection 4 - CongurationPPTPChoose PPTP (Point-to-Point-Tunneling Protocol ) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username and password.PPTP Server IP Address:Enter the PPTP server IP address provided by your ISP.Username: Enter the username provided by your ISP.Password: Enter the password provided by your ISP.Reconnect Mode: Select either Always on, On demand, or Manual.Maximum Idle Time:Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode.Advanced SettingsAddress Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP.Dynamic IPPrimary DNS Server:Enter the primary DNS server IP address assigned by your ISP.Secondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto.
35D-Link DIR-853 User ManualSection 4 - CongurationStatic IPPPTP IP Address: Enter the IP address provided by your ISP.PPTP Subnet Mask:Enter the subnet mask provided by your ISP.PPTP Gateway IP Address:Enter the gateway IP address provided by your ISP.Primary DNS Server:Enter the primary DNS server IP address assigned by your ISP.Secondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto.Click Save when you are done.PPTP (continued)
36D-Link DIR-853 User ManualSection 4 - CongurationL2TPChoose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP will provide you with a username and password.L2TP Server: Enter the L2TP server IP address provided by your ISP.Username: Enter the username provided by your ISP.Password: Enter the password provided by your ISP.Reconnect Mode: Select either Always on, On demand, or Manual.Maximum Idle Time:Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode.Advanced SettingsAddress Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP.Dynamic IPPrimary DNS Server:Enter the primary DNS server IP address assigned by your ISP.Secondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto.
37D-Link DIR-853 User ManualSection 4 - CongurationStatic IPL2TP IP Address: Enter the IP address provided by your ISP.L2TP Subnet Mask:Enter the subnet mask provided by your ISP.L2TP Gateway IP Address:Enter the gateway IP address provided by your ISP.Primary DNS Server:Enter the primary DNS server IP address assigned by your ISP.Secondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto.Click Save when you are done.L2TP (continued)
38D-Link DIR-853 User ManualSection 4 - CongurationDS-LiteDS-Lite is an IPv6 connection type. After selecting DS-Lite, the following parameters will be available for conguration:Advanced SettingsDS-Lite Conguration:Select DS-Lite DHCPv6 Option to let the router allocate the AFTR IPv6 address automatically. Select Manual Conguration to enter the AFTR IPv6 address manually.DS-Lite DHCPv6B4 IPv6 Address: Enter the B4 IPv4 address value used here.WAN IPv6 Address:Once connected, the WAN IPv6 address will be displayed here.IPv6 WAN Default Gateway:Once connected, the IPv6 WAN default gateway address will be displayed here.ManualAFTR IPv6 Address:Enter the AFTR IPv6 address used here.B4 IPv6 Address: Enter the B4 IPv4 address value used here.WAN IPv6 Address:Once connected, the WAN IPv6 address will be displayed here.IPv6 WAN Default Gateway:Once connected, the IPv6 WAN default gateway address will be displayed here.Click Save when you are done.
39D-Link DIR-853 User ManualSection 4 - CongurationIPv6To congure an IPv6 connection, click the IPv6 link. To return to the IPv4 settings, click IPv4.For Auto Detection refer to page 40.For Static IPv6 refer to page 42.For Auto Conguration (SLAAC/DHCPv6) refer to page 44.For PPPoE refer to page 47.For IPv6 in IPv4 Tunnel refer to page 51.For 6 to 4 refer to page 54.For 6rd refer to page 56.For Local Connectivity Only refer to page 58.My Internet Connection Is:Choose your IPv6 connection type from the drop-down menu. You will be presented with the appropriate options for your connection type. Click Advanced Settings... to expand the list and see all of the options.
40D-Link DIR-853 User ManualSection 4 - CongurationAuto DetectionSelect Auto Detection to automatically detect the IPv6 connection method used by your Internet Service Provider (ISP). If Auto Detection fails, you can manually select another IPv6 connection type.IPv6 DNS SettingsDNS Type: Select either Obtain DNS server address automatically or Use the following DNS address.If Use the following DNS address is selected:Primary DNS Server:If you selected Use the following DNS address above, enter the primary DNS server address. Secondary DNS Server:If you selected Use the following DNS address above, enter the secondary DNS server address.LAN IPv6 Address SettingsEnable DHCP-PD: Enable or disable DHCP Prex Delegation. LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.If Enable DHCP-PD is disabled, these additional parameters are available for conguration:LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.
41D-Link DIR-853 User ManualSection 4 - CongurationAuto Detection (continued)Advanced Settings - Address Autoconguration SettingsEnable Automatic IPv6 Address Assignment:Enable or disable the Automatic IPv6 Address Assignment feature.Enable Automatic DHCP-PD in LAN:Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface.Note: This feature requires a smaller subnet prex than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information.Autoconguration Type:Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).If you selected Stateful DHCPv6 as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.Click Save when you are done.
42D-Link DIR-853 User ManualSection 4 - CongurationStatic IPv6Select Static IP if your IPv6 information is provided by your Internet Service Provider (ISP).Use Link-Local Address:Enable or disable link-local address use.Default Gateway: Enter the default gateway for your IPv6 connection.Primary DNS Server:Enter the primary DNS server address. Secondary DNS Server:Enter the secondary DNS server address.If Use Link-Local Address is disabled these additional parameters are available for conguration:IPv6 Address: Enter the address supplied by your ISP. Subnet Prex Length:Enter the subnet prex length supplied by your ISP.LAN IPv6 Address SettingsLAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.
43D-Link DIR-853 User ManualSection 4 - CongurationStatic IPv6 (continued)Advanced Settings - Address Autoconguration SettingsEnable Automatic IPv6 Address Assignment:Enable or disable the Automatic IPv6 Address Assignment feature.Autoconguration Type:Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).If you selected Stateful DHCPv6 as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Advertisement Lifetime:Enter the IPv6 address lifetime (in minutes).Click Save when you are done.
44D-Link DIR-853 User ManualSection 4 - CongurationAuto Conguration (SLAAC/DHCPv6)Select Auto Conguration if your ISP assigns your IPv6 address when your router requests one from the ISP’s server. Some ISPs require you to adjust settings on your side before your router can connect to the IPv6 Internet.IPv6 DNS SettingsDNS Type: Select either Obtain DNS server address automatically or Use the following DNS address.If Use the following DNS address is selected:Primary DNS Server:Enter the primary DNS server address. Secondary DNS Server:Enter the secondary DNS server address.LAN IPv6 Address SettingsEnable DHCP-PD: Enable or disable prex delegation services.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.If Enable DHCP-PD is disabled, these additional parameters are available for conguration:LAN IPv6 Address: Enter a valid LAN IPv6 address.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.
45D-Link DIR-853 User ManualSection 4 - CongurationAdvanced Settings - Address Autoconguration SettingsEnable Automatic IPv6 Address Assignment:Enable or disable the Automatic IPv6 Address Assignment feature.If DHCP-PD is enabled in LAN IPv6 Address Settings:Enable Automatic DHCP-PD in LAN:Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prex than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information.Autoconguration Type:Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).If you selected Stateful DHCPv6 as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.Auto Conguration (SLAAC/DHCPv6) (continued)
46D-Link DIR-853 User ManualSection 4 - CongurationAuto Conguration (SLAAC/DHCPv6) (continued)If DHCP-PD is disabled in LAN IPv6 Address Settings and SLAAC+Stateless DHCP or SLAAC+RDNSS is chosen as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).If DHCP-PD is disabled in LAN IPv6 Address Settings and Stateful DHCPv6 is chosen as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Advertisement Lifetime:Enter the IPv6 address lifetime (in minutes).Click Save when you are done.
47D-Link DIR-853 User ManualSection 4 - CongurationPPPoESelect PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet.PPPoE Session: Choose Share with IPv4 to re-use your IPv4 PPPoE username and password, or Create a new session.Address Mode Select Static IP if your ISP assigned you an IP address. In most cases, select Dynamic IP.MTU Maximum Transmission Unit - you may need to change the MTU foroptimal performance with your ISP.If you selected Static IP as the Address Mode and Share with IPv4 as the PPPoE Session:IP Address: Enter the IP address provided by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP.If you selected Create a new session as the PPPoE Session:Username: Enter the username provided by your ISP.Password: Enter the password provided by your ISP.Address Mode: Select either Dynamic IP or Static IP.Service Name: Enter the ISP service name (optional).Reconnect Mode Select either Always On or Manual.MTU Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP.
48D-Link DIR-853 User ManualSection 4 - CongurationIf you selected Static IP as the Address Mode and Create a new session as the PPPoE Session:IP Address Enter the IP address provided by your ISPService Name Enter the ISP service name (optional).Reconnect Mode Select either Always-on or Manual.MTU Maximum Transmission Unit - you may need to change the MTU foroptimal performance with your ISP.IPv6 DNS SettingsDNS Type: Select either Obtain DNS server address automatically or Use the following DNS address.If Use the following DNS address is selected:Primary DNS Server:Enter the primary DNS server address.Secondary DNS Server:Enter the secondary DNS server address.LAN IPv6 Address SettingsEnable DHCP-PD: Enable or disable prefix delegation services. This option is only available if you selected Dynamic IP for address mode.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.PPPoE (continued)
49D-Link DIR-853 User ManualSection 4 - CongurationPPPoE (continued)If Enable DHCP-PD is disabled these additional parameters are available for conguration:LAN IPv6 Address: If DHCP-PD disabled or static address mode is selected, enter the LAN (local) IPv6 address for the router.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.Advanced Settings - Address Autoconguration SettingsEnable Automatic IPv6 Address Assignment:Enable or disable the Automatic IPv6 Address Assignment feature.If DHCP-PD is enabled in LAN IPv6 Address Settings:Enable Automatic DHCP-PD in LAN:Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prex than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information.Autoconguration Type:Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).
50D-Link DIR-853 User ManualSection 4 - CongurationPPPoE (continued)If you selected Stateful DHCPv6 as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.If DHCP-PD is disabled in LAN IPv6 Address Settings:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Advertisement Lifetime:Enter the IPv6 address lifetime (in minutes).Click Save when you are done.
51D-Link DIR-853 User ManualSection 4 - CongurationIPv6 in IPv4 TunnelThe user can congure the IPv6 connection to run in IPv4 Tunnel mode. IPv6 over IPv4 tunnelling encapsulates IPv6 packets in IPv4 packets so that IPv6 packets can be sent over an IPv4 infrastructure.Remote IPv4 Address:Enter the IPv4 remote address you will use.Remote IPv6 Address:Enter the IPv6 remote address you will use.Local IPv4 Address:Displays the current local IPv4 address.Local IPv6 Address:Enter the IPv6 local address you will use.Subnet Prex Length:Enter the subnet prex length supplied by your ISP.IPv6 DNS SettingsDNS Type: Select either Obtain DNS server address automatically or Use the following DNS address.If Use the following DNS address is selected:Primary DNS Server:Enter the primary DNS server address. Secondary DNS Server:Enter the secondary DNS server address.
52D-Link DIR-853 User ManualSection 4 - CongurationLAN IPv6 Address SettingsEnable DHCP-PD: Enable or disable prefix delegation services. This option is only available if you selected Dynamic IP for address mode.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.If Enable DHCP-PD is disabled, these additional parameters are available forconguration:LAN IPv6 Address: If DHCP-PD disabled or static address mode is selected, enter the LAN (local) IPv6 address for the router.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.Advanced Settings - Address Autoconguration SettingsEnable Automatic IPv6 Address Assignment:Enable or disable the Automatic IPv6 Address Assignment feature.If DHCP-PD is enabled in LAN IPv6 Address Settings:Enable Automatic DHCP-PD in LAN:Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prex than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information.Autoconguration Type:Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.IPv6 in IPv4 Tunnel (continued)
53D-Link DIR-853 User ManualSection 4 - CongurationIf you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).If you selected Stateful DHCPv6 as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.If DHCP-PD is disabled in LAN IPv6 Address Settings and SLAAC+Stateless DHCP or SLAAC+RDNSS is chosen as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).If DHCP-PD is disabled in LAN IPv6 Address Settings and Stateful DHCPv6 is chosen as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Advertisement Lifetime:Enter the IPv6 address lifetime (in minutes).Click Save when you are done.IPv6 in IPv4 Tunnel (continued)
54D-Link DIR-853 User ManualSection 4 - Conguration6to4In this section the user can congure the IPv6 6 to 4 connection settings. 6to4 is an IPv6 address assignment and automatic tunneling technology that is used to provide unicast IPv6 connectivity between IPv6 sites and hosts across the IPv4 Internet.6to4 Address: Displays the 6 to 4 address. 6to4 Relay: Enter the 6 to 4 relay supplied by your ISP. Primary DNS Server:Enter the primary DNS server address. Secondary DNS Server:Enter the secondary DNS server address.LAN IPv6 Address SettingsLAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.
55D-Link DIR-853 User ManualSection 4 - CongurationAdvanced Settings - Address Autoconguration SettingsEnable Automatic IPv6 Address Assignment:Enable or disable the Automatic IPv6 Address Assignment feature.Autoconguration Type:Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).If you selected Stateful DHCPv6 as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Advertisement Lifetime:Enter the IPv6 address lifetime (in minutes).Click Save when you are done.6to4 (continued)
56D-Link DIR-853 User ManualSection 4 - Conguration6rdIn this section the user can congure the IPv6 6rd connection settings.Assign IPv6 Prex: Currently unsupported.Primary DNS Server:Enter the primary DNS server address. Secondary DNS Server:Enter the secondary DNS server address.6rd Manual CongurationEnable Hub and Spoke Mode:Enable this option if you want to minimize the number of routes to the destination by using a hub and spoke method of networking.6rd Conguration: Choose the 6rd DHCPv4 Option to automatically discover and populate the data values, or Manual Conguration to enter the settings yourself.If you selected Manual conguration6rd IPv6 Prex: Enter the 6rd IPv6 prex and mask length supplied by your ISP.WAN IPv4 Address Displays the router’s IPv4 address.6rd Border Relay IPv4 Address:Enter the 6rd border relay IPv4 address settings supplied by your ISP.LAN IPv6 Address SettingsLAN IPv6 Address: Displays the router’s LAN IPv6 Address link-local address.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.
57D-Link DIR-853 User ManualSection 4 - CongurationAdvanced Settings - Address Autoconguration SettingsEnable Automatic IPv6 Address Assignment:Enable or disable the Automatic IPv6 Address Assignment feature.Autoconguration Type:Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).If you selected Stateful DHCPv6 as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Advertisement Lifetime:Enter the IPv6 address lifetime (in minutes).Click Save when you are done.6rd (continued)
58D-Link DIR-853 User ManualSection 4 - CongurationLocal Connectivity OnlyLocal Connectivity Only allows you to set up an IPv6 connection that will not connect to the Internet.Advanced SettingsIPv6 ULA SettingsEnable ULA: Click here to enable Unique Local IPv6 Unicast Addresses settings.Use Default ULA Prex:Enable this option to use the default ULA prex.If you selected Enable ULA and disabled Default ULA Prex:ULA Prex: Enter your own ULA prex.Current IPv6 ULA SettingsCurrent ULA Prex:Displays the current ULA prex. LAN IPv6 ULA: Displays the LAN's IPv6 ULA.Click Save when you are done.
59D-Link DIR-853 User ManualSection 4 - CongurationVLANVLAN allows for services such as Triple-Play to be used, and divides a network into segments that can only be accessed by other devices in the same VLAN.In the Settings menu on the bar on the top of the page, click Internet, then click the VLAN link. Triple-PlayStatus: Click to enable or disable the Triple-Play VLAN feature. Priority ID: Enable or disable trac priority ID for the Internet, IPTV, and VoIP VLANs. If Status is enabled:Internet VLAN ID Enter the VLAN ID for your Internet connection, as provided by your ISP.IPTV VLAN ID Enter the VLAN ID for your IPTV service, as provided by your ISP. VOIP VLAN ID: Enter the VLAN ID for your VoIP network, as provided by your ISP. If Priority ID is enabled:Priority ID: Select a priority ID from the drop-down menu to assign to the corresponding VLAN. Higher priority ID trac takes precedence over trac with a low priority ID tag.
60D-Link DIR-853 User ManualSection 4 - CongurationInterface Trac Type SettingLAN 1-4, Wireless, Guest Zone:From the drop-down menu, you can select the type of connection (Internet, IPTV, or Voice over IP) coming from the WAN connection to each interface on the DIR-853.Click Save when you are done.VLAN (continued)
61D-Link DIR-853 User ManualSection 4 - CongurationSmart ConnectSmart Connect: Enable or disable the Smart Connect Feature. When enabled, only a few conguration options are available to simplify conguration.Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. Wireless clients will need to enter this password to successfully connect to the network.Advanced SettingsSecurity Mode: Choose None or WPA/WPA2-Personal (recommended).Transmission Power:Select the desired wireless transmission power.Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 82 for more information.Wi-Fi Protected SetupThe easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup(WPS). Using WPS-PIN is disabled by default due to security vulnerabilities.WPS-PBC Status: Enable or disable WPS-PBC (Push Button Conguration) fuctionality.WPS-PIN Status: Enable or disable WPS-PIN fuctionality.Refer to the next page if you wish to disable Smart Connect or click Save when you are done.From this page you can congure your wireless network settings. Wireless
62D-Link DIR-853 User ManualSection 4 - CongurationIf Smart Connect is disabled the following options are available:2.4GHz / 5GHzStatus: Enable or disable the 2.4 GHz / 5 GHz wireless network.Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. Advanced SettingsSecurity Mode: Choose None or WPA/WPA2-Personal (recommended).802.11 Mode (2.4 GHz):Select the desired wireless networking standards to use. The available options for the 2.4 GHz wireless network are Mixed 802.11b/g/n, Mixed 802.11g/n, 802.11n only. 802.11 Mode (5 GHz):Select the desired wireless networking standards to use. The available options for the 5 GHz wireless network are Mixed 802.11a/n/ac, Mixed 802.11n/ac, 802.11ac only, Mixed 802.11a/n, Mixed 802.11n only, or 802.11a only.Wi-Fi Channel: Select the desired channel. The default is Auto (recommended).Transmission Power:Select the desired wireless transmission power.Channel Width(2.4 GHz):Select Auto 20/40 if you are using both 802.11n and non-802.11n devices, or select 20 MHz if you are not using any 802.11n devices.Channel Width(5 GHz):Select Auto 20/40/80 if you are using 802.11ac, 802.11n, and 802.11a devices, select Auto 20/40 if you are using 802.11n and 802.11a devices, or select 20 MHz if you are only using 802.11a devices.Wireless - Smart Connect Disabled
63D-Link DIR-853 User ManualSection 4 - CongurationHT20/40 Coexistence:(2.4 GHz):Enable or disable HT20/40 Coexistence.Visibility Status: The default setting is Visible. Select Invisible if you do not want to broadcast the SSID of your wireless network. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 82 for more information.Wi-Fi Protected SetupThe easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup(WPS). Using WPS-PIN disabled by default due to security vulnerabilities.WPS-PBC Status: Enable or disable WPS-PBC (Push Button Conguration) fuctionality.WPS-PIN Status: Enable or disable WPS-PIN fuctionality.Click Save when you are done.
64D-Link DIR-853 User ManualSection 4 - CongurationGuest ZoneIn the Settings menu on the bar on the top of the page, click Wireless, then click the Guest Zone link. The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones will be separate from your main wireless network. You may congure dierent zones for the 2.4 GHz and 5 GHz wireless bands.Note: If Smart Connect is enabled, Guest Zone is unavailable.2.4 GHz / 5 GHzStatus: Enable or disable the 2.4 GHz / 5 GHz wireless network.Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 82 for more information.Home Network AccessInternet Access Only:Enabling this option will confine connectivity to the Internet, preventing guests from accessing other local network devices.Click Save when you are done.
65D-Link DIR-853 User ManualSection 4 - CongurationNetworkThis section will allow you to change the local network settings of the router and to congure the DHCP settings. In the Settings menu on the bar on the top of the page, click Network. Click Advanced Settings... to expand the list and see all of the options. Network SettingsLAN IP Address: Enter the IP address of the router. The default IP address is 192.168.0.1.If you change the IP address, once you click Save, you will need to enter the new IP address in your browser to get back into the conguration utility.Subnet Mask: Enter the subnet mask of the router. The default subnet mask is 255.255.255.0.Management Link:The default address to access the router’s conguration is http://dlinkrouter.local/ Here, you can replace dlinkrouter with a name of your choice.Local Domain Name:Enter the domain name (optional).Enable DNS Relay: Disable to transfer the DNS server information from your ISP to your computers. If enabled, your computers will use the router for a DNS server.
66D-Link DIR-853 User ManualSection 4 - CongurationDHCP ServerStatus: Enable or disable the DHCP server.DHCP IP Address Range:Enter the starting and ending IP addresses for the DHCP server’s IP assignment.Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conict. DHCP Lease Time: Enter the length of time for the IP address lease in minutes.Always Broadcast: Enable this feature to broadcast your network's DHCP server to LAN/WLAN clients.Advanced SettingsWAN Port Speed: You may set the port speed of the Internet port to 10 Mbps, 100 Mbps, 1000 Mbps, or Auto (recommended). UPnP: Enable or disable Universal Plug and Play (UPnP). UPnP provides compatibility with networking equipment, software, and peripherals.IPv4 Multicast Stream:Enable to allow IPv4 multicast trac to pass through the router from the Internet.IPv6 Multicast Stream:Enable to allow IPv6 multicast trac to pass through the router from the Internet.Click Save when you are done.Network (continued)
67D-Link DIR-853 User ManualSection 4 - CongurationUSB SharingThis page will allow you to set up access to les on an external USB drive plugged into the router. You can access shared les through the local network or from the Internet using a web browser or an app on your mobile device. In the Settings menu on the bar on the top of the page, click USB Sharing.DLNA Media ServerStatus Enable or disable the DLNA media server function, allowing connected clients access to media les over the network.DLNA Media ServerChoose a name for your DLNA media server so that it can be found.Windows File Sharing (SAMBA)Status Enable or disable the Windows file sharing function, allowing connected clients access to shared les over the network.FTP ServerStatus Enable or disable the FTP server function, allowing connected clients access to media les through FTP.FTP Server - Advanced SettingsEnable Remote SharingIf FTP server is enabled, enable or disable remote access to les stored on a USB device plugged into the router through a web browser.FTP Server Port Enter the port number of FTP server.Idle Time Enter the time (in minutes) before connected clients will be considered idle.Click Save when you are done.
68D-Link DIR-853 User ManualSection 4 - CongurationFeaturesQoS EngineThis Quality of Service (QoS) Engine will allow you to prioritize particular clients over others, so that those clients receive higher bandwidth. For example, if one client is streaming a movie and another is downloading a non-urgent le, you might wish to assign the former device a higher priority than the latter so that the movie streaming is not disrupted by the trac of the other devices on the network.In the Features menu on the bar on the top of the page, click QoS Engine.Under Connected Clients, you will see device cards representing each connected client. If some are o-screen, you can use the < and > buttons to scroll through the cards.A maximum of one device can be assigned Highest priority.A maximum of two devices can be assigned High priority.A maximum of eight devices can be assigned Medium priority.If no devices are explicitly assigned a priority, they will all be treated with equal priority. If some devices are not assigned a priority and others are, the unassigned devices will be treated with the lowest priority.To assign a priority level to a device, drag the device card from the All Devices list over an empty slot and release the mouse button. The card will remain in the slot. If you want to remove a priority assignment from a device and return it to the All Devices list, click the cross icon in the top right of the device card.Click Save when you are done.
69D-Link DIR-853 User ManualSection 4 - CongurationFirewallThe router’s rewall protects your network from malicious attacks over the Internet. In the Features menu on the bar on the top of the page, click Firewall. Click Advanced Settings... to expand the list and see all of the options. Enable DMZ: Enable or disable Demilitarized Zone (DMZ). This completely exposes the client to threats over the Internet, and is not recommended in ordinary situations.DMZ IP Address: If you enabled DMZ, enter the IP address of the client you wish to expose, or use the drop-down menu to quickly select it.Enable SPI IPv4: Enabling Stateful Packet Inspection (SPI) helps to prevent cyber attacks by validating that the trac passing through the session conforms to the protocol.Enable Anti-Spoof Checking:Enable this feature to help protect your network from certain kinds of “spoong” attacks.IPv6 Simple Security:Enable or disable IPv6 simple security.IPv6 Ingress Filtering:Enable or disable IPv6 ingress ltering.
70D-Link DIR-853 User ManualSection 4 - CongurationAdvanced Settings - Application Level Gateway (ALG) CongurationPPTP: Allows multiple machines on the LAN to connect to their corporate network using the PPTP protocol.IPSec (VPN): Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This Application Level Gateway (ALG) may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try turning this ALG o. Please check with the system administrator of your corporate network whether your VPN client supports NAT traversal.RTSP: Allows applications that uses Real Time Streaming Protocol (RTSP) to receive streaming media from the Internet.SIP: Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG o.Click Save when you are done.Firewall Settings (continued)
71D-Link DIR-853 User ManualSection 4 - CongurationIPv4/IPv6 RulesThe IPv4/IPv6 Rules section is an advanced option that lets you congure what kind of trac is allowed to pass through the network. To congure the IPv4 rules, from the Firewall Settings page click IPv4 Rules. To congure IPv6 rules, from the Firewall Settings page click IPv6 Rules. To return to the main Firewall Settings page, click Advanced.To begin, use the drop-down menu to select whether you want to ALLOW or DENY the rules you create. You can also choose to turn ltering OFF.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following options will appear:Name: Enter a name for the rule.Source IP Address Range:Enter the source IP address range that the rule will apply to, and using the drop-down menu, specify whether it is a WAN or LAN IP address.Destination IP Address Range:Enter the destination IP address range that the rule will apply to, and using the drop-down menu, specify whether it is a WAN or LAN IP address.Protocol & Port Range:Select the protocol of the trac to allow or deny (Any, TCP, or UDP) and then enter the range of ports that the rule will apply to.Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Refer to Schedule on page 82 for more information.Click Save when you are done.
72D-Link DIR-853 User ManualSection 4 - CongurationPort ForwardingPort forwarding allows you to specify a port or range of ports to open for specic devices on the network. This might be necessary for certain applications to connect through the router. In the Features menu on the bar on the top of the page, click Port Forwarding.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following options will appear:Name: Enter a name for the rule.Local IP: Enter the IP address of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu.TCP Port: Enter the TCP ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma (for example: 24,1009,3000-4000).UDP Port: Enter the UDP ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma (for example: 24,1009,3000-4000).Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 82 for more information.Click Save when you are done.
73D-Link DIR-853 User ManualSection 4 - CongurationVirtual ServerThe virtual server allows you to specify a single public port on your router for redirection to an internal LAN IP address and Private LAN port. To congure the virtual server, from the Port Forwarding page click Virtual Server. To return to the main Port Forwarding page, click Port Forwarding.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:Name: Enter a name for the rule. Alternatively, select the protocol/Application from the drop-down menu.Local IP: Enter the IP address of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu.Protocol: Select the protocol of the trac to allow or deny (TCP, UDP, Both, or Other).Protocol Number: If you entered Other above, enter the protocol number.External Port: Enter the public port you want to open.Internal Port: Enter the private port you want to open.Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 82 for more information.Click Save when you are done.
74D-Link DIR-853 User ManualSection 4 - CongurationWebsite FilterThe website lter settings allow you to block access to certain web sites. You can either create a list of sites to block, or create a list of sites to allow (with all other sites being blocked).In the Features menu on the bar on the top of the page, click Website Filter.If you want to create a list of sites to block, select DENY client access to ONLY these sites from the drop-down menu. All other sites will be accessible. If you want to specify a list of sites to allow, select ALLOW clients access to ONLY these sites from the drop-down menu. All other sites will be blocked.You may specify a maximum of twenty four web sites. To add a new site to the list, click Add Rule. Next, under Website URL/Domain enter the URL or domain. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, simply replace the URL or domain.Click Save when you are done.
75D-Link DIR-853 User ManualSection 4 - CongurationStatic RoutesThe Static Routes section allows you to dene custom routes to control how data trac is moved around your network.In the Features menu on the bar on the top of the page, click Static Route.To congure IPv6 rules, click IPv6 and refer to IPv6 on page 76. To return to the main IPv4 static routes page, click IPv4.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Route button. Click Save when you are done. If you edit or create a rule, the following options will appear:Name: Enter a name for the rule.Destination Network:Enter the IP address of packets that will take this route.Mask: Enter the subnet mask of the route.Gateway: Enter your next hop gateway to be taken if this route is used.Metric: Enter a route metric value ranging from 0 to 15. This value indicates the cost of using this route. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Save when you are done.
76D-Link DIR-853 User ManualSection 4 - CongurationIPv6To congure IPv6 rules, on the Static Routes page click IPv6. To return to the main IPv4 static routes page, click IPv4.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:Name: Enter a name for the rule.DestNetwork: This is the IP address of the router used to reach the specified destination.PrexLen: Enter the IPv6 address prex length of the packets that will take this route. Gateway: Enter your next hop gateway to be taken if this route is used.Metric: Enter a route metric value ranging from 0 to 15. This value indicates the cost of using this route. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used.Click Save when you are done.
77D-Link DIR-853 User ManualSection 4 - CongurationDynamic DNSMost Internet Service Providers (ISPs) assign dynamic (changing) IP addresses. Using a dynamic DNS service provider, people can enter your domain name in their web browser to connect to your server no matter what your IP address is.In the Features menu on the bar on the top of the page, click Dynamic DNS.At the bottom of the page are the IPv6 host settings. To congure an IPv6 dynamic DNS host, refer to IPv6 Host on page 78.Enable Dynamic DNS:Enable or disable dynamic DNS. Enabling this feature will reveal further conguration options.Status: Displays the current dynamic DNS connection status.Server Address: Enter the address of your dynamic DNS server, or select one from the drop-down menu.Host Name: Enter the host name that you registered with your dynamic DNS service provider.User Name: Enter your dynamic DNS username.Password: Enter your dynamic DNS password.Time Out: Enter a time out time (in hours).Click Save when you are done.
78D-Link DIR-853 User ManualSection 4 - CongurationIPv6 HostThe IPv6 host settings are found at the bottom of the Dynamic DNS page.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Record button. Click Save when you are done. If you edit or create a rule, the following options will appear:Host Name: Enter the host name that you registered with your dynamic DNS service provider.IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select the server device in the drop-down menu. Click Save when you are done.
79D-Link DIR-853 User ManualSection 4 - CongurationQuick VPNThis page will help you congure the Quick VPN feature of your router. For more information refer to Quick VPN on page 88. Before proceeding, ensure that your Internet connection is working properly. We recommend conguring Dynamic DNS before proceeding with Quick VPN setup. If your router is assigned an IP address from your ISP using DHCP, it may frequently change, requiring clients credentials to be set up again and a simple DDNS address will be easier than an IP address.In the Features menu on the bar on the top of the page, click Quick VPN.Click User to create, manage, and delete user accounts with user-dened access to certain router services. Refer to User on page 87.Congure the following options:L2TP over IPsec: Enable or disable the Quick VPN server.If Quick VPN is enabled, the following options are available:Username: Enter a username between 1 and 20 characters.Password Enter a username between 1 and 20 characters.PSK Enter a passkey between 6 and 64 characters.
80D-Link DIR-853 User ManualSection 4 - CongurationAdvanced Settings - Address Autoconguration SettingsAuthentication Protocol:Choose the authentication protocol type: MSCHAPv2, PAP, or CHAP.MSCHAPv2 is the default.MPPE: Select the encryption cipher strength: None, RC4-40, or RC4-128.RC4-128 is the default.Click Save when you are done.Quick VPN (continued)
81D-Link DIR-853 User ManualSection 4 - CongurationManagementTime & ScheduleTimeThe Time page allows you to congure, update, and maintain the correct time on the internal system clock. From here you can set the time zone, the Network Time Protocol (NTP) server, and enable or disable daylight saving time.In the Management menu on the bar on the top of the page, click Time & Schedule.To congure and manage your schedules, click Schedule and refer to Schedule on page 82.Time CongurationTime Zone: Select your time zone from the drop-down menu.Time: Displays the current date and time of the router.Enable Daylight Saving:Enable or disable daylight saving time.Automatic Time CongurationUpdate Time Using an NTP Server:Enable or disable to allow an NTP server on the Internet to synchronize the time and date with your router. If you enable this option, select an NTP server from the drop-down menu. To congure the router's time and date manually, disable this option and use the drop-down menus that appear to input the time and date.Click Save when you are done.
82D-Link DIR-853 User ManualSection 4 - CongurationScheduleSome router functions can be controlled through a pre-congured schedule. To create, edit, or delete schedules, from the Time page click Schedule. To return to the Time page, click Time. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following screen will appear:First, enter the name of your schedule in the Name eld.Each box represents one hour, with the time at the top of each column. To add a time period to the schedule, simply click on the starting hour and drag to the ending hour. You can add multiple days to the schedule, but only one period per day.To remove a time period from the schedule, click on the cross icon.Click Save when you are done.
83D-Link DIR-853 User ManualSection 4 - CongurationSystem LogThe router keeps a running log of events. This log can be sent to a Syslog server, or sent to your email address. In the Management menu on the bar on the top of the page, click System Log. Log SettingsSystem Log Click the Check System Log button to download a text le containing the system log.SysLog SettingsEnable Logging to Syslog Server:Check this box to send the router logs to a SysLog Server. If Logging to the Syslog Server is Enabled:Syslog Server IP Address:Enter the IP address for the Syslog server. If the Syslog server is connected to the extender, select it from the drop-down menu to automatically populate the eld. Email SettingsEnable E-mail Notication:Enable this option if you want the logs to be automatically sent to an email address.If E-mail notication is Enabled:From E-mail Address:Enter the email address your SysLog messages will be sent from.To E-mail Address: Enter the email address your SysLog messages will be sent to.SMTP Server Address:Enter your SMTP server address.
84D-Link DIR-853 User ManualSection 4 - CongurationSystem Log (continued)SMTP Server Port: Enter your SMTP server port.Enable Authentication:Check this box if your SMTP server requires authentication.Account Name: Enter your SMTP account name.Password: Enter your SMTP account's passwordE-mail Log When Full or On ScheduleSend When Log Full:If enabled, this option will set the router to send the log when it is full.Send on Schedule: If enabled, this option will set the router to send according to a set schedule.Schedule: If you enable Send On Schedule, use the drop-down menu to select a schedule to apply. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 82 for more information.Click Save when you are done.
85D-Link DIR-853 User ManualSection 4 - CongurationSystem AdminThis page will allow you to change the administrator (Admin) password and enable remote management. In the Management menu on the bar on the top of the page, click System Admin. To load, save, reset settings, or reboot the router, click System and refer to Schedule on page 82.Admin PasswordPassword: Enter a new password for the administrator account. You will need to enter this password whenever you congure the router using a web browser.Enable Graphical Authentication (CAPTCHA):Enables a challenge-response test to require users to type letters or numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your router’s network settings.Advanced Settings - AdministrationEnable HTTPS Server:Check to enable HTTPS to connect to the router securely. Instead of using http://dlinkrouter.local./, you must use https://dlinkrouter.local./ in order to connect to the router.Enable Remote Management:Remote management allows the DIR-853 to be congured from the Internet by a web browser. A password is still required to access the web management interface. Remote Admin Port:The port number used to access the DIR-853 is used in the URL. Example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the DIR-853 and 8080 is the port used for the web management interface. Note: If you enabled Use HTTPS and wish to access the router remotely and securely, you must enter https:// at the beginning of the address.Click Save when you are done.
86D-Link DIR-853 User ManualSection 4 - CongurationSystemSave Settings To Local Hard Drive:This option will save the current router conguration settings to a le on your computer.Load Settings From Local Hard Drive:This option will load a previously saved router conguration le. This will overwrite the router’s current conguration.Restore To Factory Default Settings:This option will restore all conguration settings back to the settings that were in eect at the time the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router conguration settings, use the Save Settings To Local Hard Drive button above. Auto Reboot CongurationReboot The Device:Click to reboot the router immediately.Auto Reboot: You may set the DIR-853 to automatically reboot at a set time. The options are Never, Daily, Weekly. You may set the hour using a 24 hour format, the minute, and the day you wish to have the DIR-853 automatically reboot.Click Save when you are done.SystemThis page allows you to save the router’s current conguration, load a previously saved conguration, reset the router to its factory default settings, or reboot the router.From the Admin page, click System. To return to the Admin page, click Admin.
87D-Link DIR-853 User ManualSection 4 - CongurationUser & DeviceUserThe User section is used to create, manage, and delete user accounts with user-dened access to certain router services.In the Management menu on the bar on the top of the page, click User & Device. To congure user accounts, click on the User tab.If you wish to remove a user account, click on its trash can icon in the Delete column. If you wish to edit a user account, click on its pencil icon in the Edit column. If you wish to create a new user, click the Create User button. Click Save when you are done. If you edit or create a rule, the following options will appear:User Name: Enter a username for the new user account.Password: Enter a password for the new user account. SAMBAStatus: Enable or disable the Windows le sharing function for this user, allowing connected clients access to media les over the network.Permission: If SAMBA is enabled, choose to assign either Read Only or Read/Write permission.Folder: Click Browse to select the folder you want to share.
88D-Link DIR-853 User ManualSection 4 - CongurationFTPStatus: Enable or disable FTP server access for this user.Permission: If FTP is enabled, choose to assign either Read Only or Read/Write permission.Folder: Click Browse to select the folder you want to share.VPNStatus: Enable or disable Virtual Private Network (VPN) functionality for this user.Click Save when you are done.User (continued)
89D-Link DIR-853 User ManualSection 4 - CongurationDeviceOn the Device page, you can manage Parental Control settings for devices added to the list, which will allow or block access to the network for those devices based on the selected schedule. To begin, use the drop-down menu to select whether you want to ALLOW or DENY the rules you create. From the User page, click Device. To return to the User page, click User.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Apply when you are done. If you edit or create a rule, the following options will appear:Name: Enter a name for the rule.Mac Address: Enter the MAC address of the device on your local network that you want to apply the rule to. Alternatively, select the device from the drop-down menu.Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 82 for more information.Click Save when you are done.
90D-Link DIR-853 User ManualSection 4 - CongurationUpgradeThis page will allow you to upgrade the router’s rmware or language pack, either automatically or manually. To manually upgrade the rmware or language pack, you must rst download the relevant le from http://support.dlink.com.In the Management menu on the bar on the top of the page, click Upgrade.Firmware InformationCurrent Firmware Version/Date :The current rmware's version and date will be displayed.Check for New Firmware:Click this button to prompt the router to automatically check for a new rmware version. If a newer version is found, it will prompt you to install it.Upgrade ManuallyUpgrade Firmware:If you wish to upgrade manually, rst download the rmware le you wish to upgrade to. Next, click the Upgrade Firmware button and browse to the le to install the new rmware. You can also browse to a language pack le to install a new language pack.
91D-Link DIR-853 User ManualSection 4 - CongurationStatisticsOn the Statistics page you can view the amount of packets that pass through the router on the WAN, LAN, and wireless segments.In the Management menu on the bar on the top of the page, click Statistics.You can view the Internet, LAN, Wi-Fi 2.4 GHz, or Wi-Fi 5 GHz by clicking on the respective tabs at the top. The graph will update in real time. To clear the information on the graph, click Clear.The trac counter will reset if the device is rebooted.
92D-Link DIR-853 User ManualSection 5 - Quick VPNWith Quick VPNUnencrypted DataEncrypted DataYour Network with Quick VPN ServerInternetPublic Unsecured Wi-Fi HotspotYour LaptopThis router is equipped with D-Link's Quick VPN technology. Virtual Private Networking (VPN) creates a connection between devices across the Internet. Using Quick VPN allows you to securely connect your computer or mobile device to places with free, untrusted Wi-Fi hotspots in places like coee shops and hotels by encrypting and relaying it through your home Internet connection. This extra 'hop' reduces the chances of hackers stealing your information, such as logins, passwords, and credit card numbers. When traveling, Quick VPN lets you watch sports and use video streaming services without experiencing blackouts or ltering. You can surf the whole Internet unltered and unblocked, just as you would at home.Public Unsecured Wi-Fi HotspotInternetYour Laptop Potential Hacker Stealing DataWithout Quick VPNQuick VPN
93D-Link DIR-853 User ManualSection 5 - Quick VPNImportant Information• Quick VPN only provides an added layer of security against specic types of snooping attacks and does not guarantee complete data integrity or protection. Only trac in the tunnel between your router and device will be encrypted, WAN trac will leave your D-Link Quick VPN enabled router unencrypted.• Keep your Quick VPN Username, Password, and Passkey safe. Keep your Quick VPN Username, Password, and Passkey safe. It is recommended that you change these credentials periodically.• A device connected via Quick VPN tunnel may experience lower data throughput and higher latency due to a number of factors including: Internet conditions, local and remote network Wi-Fi and WAN bandwidth limitations, and increased latency. This may negatively impact real time voice and video communication.• Quick VPN supports up to ve concurrent VPN client sessions using the same login and password are supported. Quick VPN uses L2TP/IPsec with MSCHAPv2, PAP, or CHAP authentication.• You device may warn you that your information may be intercepted, since you control the Quick VPN server, you may ignore this.• UDP Ports 500, 4500, 1701 and IP Port 50 must be open in order for Quick VPN to work.• L2TP/IPsec VPN usage may be restricted in some countries and on some networks. If you have trouble using Quick VPN on some networks, but not others and are not violating network access rules, try contacting your ISP or network administrator.• Devices connected via Quick VPN are assigned addresses on a separate subnet (ex. 192.168.1.x). Some network resources may be unavailable when connecting via Quick VPN.• If your Internet connection uses DHCP, it is strongly recommended that you rst set up Dynamic DNS (DDNS), such as D-Link DDNS, to eliminate the need to recongure client devices in the event your ISP assigns you a new WAN IP address.The following instructions explain and help you to congure your D-Link Quick VPN enabled router and devices to create a Virtual Private Network (VPN). This feature is provided for advanced users who wish to connect remotely and use their router's Internet connection to add a layer of security while using untrusted networks. Congure the Quick VPN Server on your router rst and then set up client devices to connect through your router's WAN connection.
94D-Link DIR-853 User ManualSection 5 - Quick VPNQuick VPN Server Setup InstructionsCongure the following options:Click Save and proceed to client setup pages.L2TP over IPSec: Enable or disable the Quick VPN server.If you enable Quick VPN, the following options are available:Username: . Enter a username between 1 and 20 charactersPassword: Enter a password between 1 and 20 characters.PSK: Enter a passkey between 6 and 64 characters.AuthenticationProtocol:Choose the authentication protocol type: MSCHAPv2, PAP, or CHAP.MSCHAPv2 is the default.MPPE: Select the encryption cipher strength: none, RC4-40, or RC4-128.RC4-128 is the default.Click Save when you are done.
95D-Link DIR-853 User ManualSection 5 - Quick VPNiOS DevicesVPN Setup InstructionsThis section provides Quick VPN setup instructions for iOS devices using the Export Prole function. Refer to Quick VPN Server Setup Instructions on page 94 for more information.Open the e-mail containing your Quick VPN prole.Open the attachment.
96D-Link DIR-853 User ManualSection 5 - Quick VPNThe Install Prole dialog will appear, tap Install in the upper right hand corner of your screen.Enter your device's passcode when prompted. VPN Setup Instructions (Continued)
97D-Link DIR-853 User ManualSection 5 - Quick VPNYour iOS device is now congured to connect to your Quick VPN server.Enter the Shared Secret (PSK) from the Quick VPN conguration page. Tap Done.Acknowledge the disclaimer by tapping Install in the upper right hand corner. Tap the red Install button.VPN Setup Instructions (Continued)
98D-Link DIR-853 User ManualSection 5 - Quick VPNConnect or DisconnectTo connect or disconnect from to your Quick VPN server, open Settings and tap the button next to VPN.The VPN icon will appear in the notication area at the top of your screen indicating that your device is currently connected to the Quick VPN server.
99D-Link DIR-853 User ManualSection 5 - Quick VPNOpen the exported prole. The Install Prole dialog will appear; click Continue and Install. Enter your user account password when prompted. Close the Proles dialog.Mac OS XVPN Setup InstructionsThis section provides Quick VPN setup instructions for OS X using the Export Prole function. Refer to Quick VPN Server Setup Instructions on page 94 for more information.Go to Ò > System Preferences... > Network and select the Quick VPN connection and click Authentication Settings.
100D-Link DIR-853 User ManualSection 5 - Quick VPNEnter your Passkey in the Shared Secret text box and click OK, Apply, then OK.Your Mac is now congured to connect to your Quick VPN server.VPN Setup Instructions (Continued)
101D-Link DIR-853 User ManualSection 5 - Quick VPNConnect or DisconnectTo connect to or disconnect from your Quick VPN server, go to Ò> System Preferences... > Network.Select the Quick VPN connection and click on the Connect or Disconnect button.
102D-Link DIR-853 User ManualSection 5 - Quick VPNClick the Start button and type vpn into the Search programs and les box. Select Set up a virtual private network (VPN) connection.Enter the IP/DDNS address of your Quick VPN server in the Internet address box, create a name for your connection in the Destination Name, check Don't Connect now; just set it up so I can connect later, and click Next. Windows 7VPN Setup Instructions
103D-Link DIR-853 User ManualSection 5 - Quick VPNEnter your Username. If you would like windows to save your password, enter your Password and check Remember this password. Click Create to continue.Do not click Connect Now. Click Close. Click the Start button and type view network connections into the Search programs and les text box. Select View network connections. VPN Setup Instructions (Continued)
104D-Link DIR-853 User ManualSection 5 - Quick VPNYour Windows 7 system is now congured to connect to your Quick VPN server.Click Advanced settings. Enter your Passkey in the Key text box under Use preshared key for authentication. Click OK to close Advanced Properties and click OK to close Quick VPN Connection Properties.VPN Setup Instructions (Continued)
105D-Link DIR-853 User ManualSection 5 - Quick VPNTo connect to or disconnect from your Quick VPN server, click on the Network Settings icon in the notication area of the Windows taskbar and from the Dial Up and VPN section click on your Quick VPN connection and click on the Connect or Disconnect button.Connect or Disconnect
106D-Link DIR-853 User ManualSection 5 - Quick VPNWindows 8.1/8VPN Setup InstructionsThis section provides Quick VPN setup instructions for Windows 8.1/8Click the Start button and type vpn. Select Manage virtual private networks.From the Network Settings page, click Add a VPN Connection.
107D-Link DIR-853 User ManualSection 5 - Quick VPN1Select Microsoft from VPN Provider.2Create a name for your VPN connection.3Enter your IP/DDNS address of your Quick VPN server.4Select User name and password from Type of sign-in info.5If you would like windows to remember your sign-in information, enter your User name, Password, and select Remember my sign-in info6Choose Save.Add a VPN Connection
108D-Link DIR-853 User ManualSection 5 - Quick VPNSelect the Security tab. For the Type of VPN, select Layer2Tunneling with IPsec (L2TP/IPSec). Right-click on the Quick VPN Connection you just created and left-click on Properties.VPN Setup Instructions (Continued)
109D-Link DIR-853 User ManualSection 5 - Quick VPNClick the Start button and type view network connections.Select View network connections.Right-click your Quick VPN Connection and left-click Properties. Select the Security tab. For the Type of VPN, select Layer 2 Tunneling with IPsec (L2TP/IPSec).VPN Setup Instructions (Continued)
110D-Link DIR-853 User ManualSection 5 - Quick VPNClick Advanced settings. Enter your Passkey in the Key text box under Use preshared key for authentication. Click OK to close Advanced Properties and click OK to close Quick VPN Properties.Your Windows 8.1/8 system is now congured to connect to your Quick VPN server.VPN Setup Instructions (Continued)
111D-Link DIR-853 User ManualSection 5 - Quick VPNConnect or DisconnectTo connect to or disconnect from your Quick VPN server, click on the Network Settings icon in the notication area of the Windows taskbar. Click on your Quick VPN connection and click on the Connect or Disconnect button.
112D-Link DIR-853 User ManualSection 5 - Quick VPNClick Start > Settings > Network & Internet > NetworkandSharingCenter > VPN > Add a VPN Connection.Windows 10VPN Setup InstructionsThis section provides Quick VPN setup instructions for Windows 10.
113D-Link DIR-853 User ManualSection 5 - Quick VPN1Select Windows (built-in) from the VPN Provider drop down menu.2Create a name for your VPN connection.3Enter your IP/DDNS address of your Quick VPN server.4Select L2TP/IPSec with pre-shared key from VPN type.5Enter the Passkey.6Select User name and password from Type of sign-in info.If you would like windows to remember your sign-in information, enter your User name, Password, and select Remember my sign-in info7Choose Save.Your Windows 10 system is now congured to connect to your Quick VPN server.Add a VPN Connection
114D-Link DIR-853 User ManualSection 5 - Quick VPNConnect or DisconnectTo connect to or disconnect from your Quick VPN server, click on the Network Settings icon in the notication area of the Windows taskbar and click on your Quick VPN connection. The Network & Internet Settings page will open. Click on the Connect or Disconnect button.
115D-Link DIR-853 User ManualSection 5 - Quick VPNThis section provides Quick VPN setup instructions for Android devices. Your device's screens may vary.Go to Settings > More from the Wireless & networks > VPN > +AndroidVPN Setup Instructions
116D-Link DIR-853 User ManualSection 5 - Quick VPN1Enter a name for your VPN connection.2Select L2TP/IPSec PSK for Type.3Enter the IP/DDNS address of your Quick VPN server.4Enter your Passkey in IPSec pre-shared key eld.5Choose Save.Your Android device is now congured to connect to your Quick VPN server.Edit VPN Prole
117D-Link DIR-853 User ManualSection 5 - Quick VPNConnect or DisconnectTo connect to or disconnect from your Quick VPN server, go to Settings > More from the Wireless & networks > VPN and select the Quick VPN connection you created.
118D-Link DIR-853 User ManualSection 5 - Quick VPNTo connect, enter your Username and Password and select CONNECT.To disconnect, select DISCONNECT.Connect or Disconnect (Continued)
119D-Link DIR-853 User ManualSection 6- Connecting a Wireless ClientConnect a Wireless Client to your RouterWPS ButtonStep 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS process).The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-853 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:Step 1 - Press the WPS button on the DIR-853 for about 1 second. The LED on the front will start to blink.Step 3 - Allow up to 1 minute for your connection to be congured. Once the Internet light stops blinking, you will be connected and your wireless connection will be secure with WPA2.WPS Button
120D-Link DIR-853 User ManualSection 6- Connecting a Wireless ClientWhen connecting to the DIR-853 wirelessly for the rst time, you will need to input the wireless network name (SSID) and Wi-Fi password (security key) of the device you are connecting to. If your product has a Wi-Fi conguration card, you can nd the default network name and Wi-Fi password here. Otherwise refer to the product label for the default Wi-Fi network SSID and password, or enter the Wi-Fi credentials set during the product conguration. To join an existing network, locate the wireless network icon in the taskbar, next to the time display and click on it. Wireless IconClicking on this icon will display a list of wireless networks which are within range of your computer. Select the desired network by clicking on the SSID.Windows® 10
121D-Link DIR-853 User ManualSection 6- Connecting a Wireless ClientTo connect to the SSID, click Connect. To automatically connect with the router when your device next detects the SSID, click the Connect Automatically check box. You will then be prompted to enter the Wi-Fi password (network security key) for the wireless network. Enter the password into the box and click Next to connect to the network. Your computer will now automatically connect to this wireless network when it is detected.You can also use Wi-Fi Protected Setup (WPS) to connect to the router. Press the WPS button on your D-Link device and you will be automatically connected.
122D-Link DIR-853 User ManualSection 6- Connecting a Wireless ClientWindows® 8WPA/WPA2It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used.To join an existing network, locate the wireless network icon in the taskbar next to the time display. Wireless IconClicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name.
123D-Link DIR-853 User ManualSection 6- Connecting a Wireless ClientYou will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to.
124D-Link DIR-853 User ManualSection 6- Connecting a Wireless ClientWindows® 7It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.1. Click on the wireless icon in your system tray (lower-right corner).2. The utility will display any available wireless networks in your area.Wireless IconWPA/WPA2
125D-Link DIR-853 User ManualSection 6- Connecting a Wireless Client3. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.4. The following window appears while your computer tries to connect to the router.
126D-Link DIR-853 User ManualSection 6- Connecting a Wireless Client5. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. You can also connect by pushing the WPS button on the router.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router.
127D-Link DIR-853 User ManualSection 6- Connecting a Wireless ClientWPSThe WPS feature of the DIR-853 can be congured using Windows® 7. Carry out the following steps to use Windows® 7 to congure the WPS feature:1. Click the Start button and select Computer from the Start menu.2. Click Network on the left side.
128D-Link DIR-853 User ManualSection 6- Connecting a Wireless Client3. Double-click the DIR-853.4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next.DIR-853
129D-Link DIR-853 User ManualSection 6- Connecting a Wireless Client5. Type a name to identify the network.6. To congure advanced settings, click the icon.Click Next to continue.
130D-Link DIR-853 User ManualSection 6- Connecting a Wireless Client7. The following window appears while the DIR-853 is being congured. Wait for the conguration to complete.8. The following window informs you that WPS on the DIR-853 has been set up successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future.9. Click Close to complete WPS setup.
131D-Link DIR-853 User ManualSection 6- Connecting a Wireless ClientWindows Vista®Windows Vista® users may use the built-in wireless utility. If you are using another company’s wireless utility, please refer to the user manual of your wireless adapter for help connecting to a wireless network. Most wireless utilities will have a “site survey” option similar to the Windows Vista® utility as seen below.Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. orThe utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.
132D-Link DIR-853 User ManualSection 6- Connecting a Wireless ClientWPA/WPA22. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect.1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
133D-Link DIR-853 User ManualSection 6- Connecting a Wireless Client3. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router.
134D-Link DIR-853 User ManualSection 7 - TroubleshootingTroubleshootingThis chapter provides solutions to problems that can occur during the installation and operation of the DIR-853. Read the following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a dierent operating system, the screenshots on your computer will look similar to these examples.1. Why can’t I access the web-based conguration utility?When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. • Make sure you have an updated Java-enabled web browser. We recommend the following: - Microsoft Internet Explorer® 10 or higher- Mozilla Firefox 28 or higher- Google™ Chrome 28 or higher- Apple Safari 6 or higher• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a dierent cable, or connect to a dierent port on the device if possible. If the computer is turned o, the link light may not be on.• Disable any Internet security software running on the computer. Software rewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows® XP rewall may block access to the conguration pages. Check the help les included with your rewall software for more information on disabling or conguring it.
135D-Link DIR-853 User ManualSection 7 - Troubleshooting• Congure your Internet settings:• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.• Close your web browser (if open) and open it.• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. • If you still cannot access the conguration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the conguration. If you have multiple computers, try connecting using a dierent computer.2. What can I do if I forgot my password?If you forgot your password, you must reset your router. This process will change all your settings back to the factory defaults.To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, leave the password box empty.
136D-Link DIR-853 User ManualSection 7 - Troubleshooting3. Why can’t I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To nd the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be another computer, or a URL. • Click on Start and then click Run. • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472
137D-Link DIR-853 User ManualSection 7 - TroubleshootingYou should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480). Once you nd your MTU, you can now congure your router with the proper MTU size. To change the MTU rate on your router follow the steps below: • Open your browser, enter the IP address of your router (192.168.0.1) and click OK. • Enter your username (admin) and password (blank by default). Click OK to enter the web conguration page for the device. • Click on Setup and then click Manual Congure.• To change the MTU, enter the number in the MTU eld and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten.
138D-Link DIR-853 User ManualAppendix A - Wireless BasicsD-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers.A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and oce environments, and public areas such as airports, coee shops and universities. Innovative ways to utilize WLAN technology are helping people work, and communicate more eciently. Increased mobility and the absence of cabling and other xed infrastructure have proven to be benecial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link.Wireless Basics
139D-Link DIR-853 User ManualAppendix A - Wireless BasicsWhat is Wireless?Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home or oce network.Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can aord. D-Link has all the products you need to build your network.How does wireless work? Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two dierent types of wireless networksl: Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN).Wireless Local Area Network (WLAN)In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, university and high school campuses, airports, golf courses, and many other outdoor venues.
140D-Link DIR-853 User ManualAppendix A - Wireless BasicsWireless Personal Area Network (WPAN)Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away.Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power. This makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries.Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, oce, business, D-Link has a wireless solution for it.Home Uses/Benets • Gives everyone at home broadband access • Surf the web, check email, instant message, etc. • Gets rid of the cables around the house • Simple and easy to use Small Oce and Home Oce Uses/Benets • Stay on top of everything at home as you would at oce • Remotely access your oce network from home • Share Internet connection and printer with multiple computers • No need to dedicate oce space
141D-Link DIR-853 User ManualAppendix A - Wireless BasicsWhere is wireless used? Wireless technology is expanding everywhere, not just at home or oce. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coee shops, libraries, restaurants, and convention centers.Wireless network is easy to setup, but if you’re installing it for the rst time it could be quite a task not knowing where to start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.TipsHere are a few things to keep in mind, when you install a wireless network.Centralize your router or access pointMake sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range.Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would signicantly reduce any interference that the appliances might cause since they operate on same frequency.Security Don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to the product manual for detail information on how to set it up.
142D-Link DIR-853 User ManualAppendix A - Wireless Basics There are basically two modes of networking: • Infrastructure – All wireless clients will connect to an access point or wireless router.• Ad-hoc – Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DIR-853 wireless network USB adapters.An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-hoc network contains only clients, such as laptops with wireless USB adapters. All the adapters must be in Ad-hoc mode to communicate.Wireless Modes
143D-Link DIR-853 User ManualAppendix B - Networking BasicsNetworking BasicsCheck your IP addressAfter you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start Search box.)At the prompt, type ipcong and press Enter.This will display the IP address, subnet mask, and the default gateway of your adapter.If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some rewall software programs may block a DHCP request on newly installed adapters.
144D-Link DIR-853 User ManualAppendix B - Networking BasicsStatically Assign an IP addressIf you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:Step 1Windows® 7 - Click on Start > Control Panel > Network and Internet > Network and Sharing Center.Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.Windows® XP - Click on Start > Control Panel > Network Connections.Windows® 2000 - From the desktop, right-click My Network Places > Properties.Step 2Right-click on the Local Area Connection which represents your network adapter and select Properties.Step 3Highlight Internet Protocol (TCP/IP) and click Properties.Step 4Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router (I.E. 192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP.Step 5Click OK twice to save your settings.
145D-Link DIR-853 User ManualAppendix B - Networking BasicsWireless SecurityThis section will show you the dierent levels of security you can use to protect your data from intruders. The DIR-853 oers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK (Pre-Shared Key) • WPA (Wi-Fi Protected Access) • WPA-PSK (Pre-Shared Key)What is WPA?WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). The 2 major improvements over WEP: • Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and by adding an integrity-checking feature, ensures that the keys haven’t been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP.• User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computer’s hardware-specic MAC address, which is relatively simple to be snied out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network.WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point.WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network.
146D-Link DIR-853 User ManualAppendix C - Technical SpecicationsTechnical SpecicationsDevice Interfaces• Wireless Interface (2.4 GHz): IEEE 802.11n/g/b• Wireless Interface (5 GHz): IEEE 802.11 ac/n/a• Four 10/100/1000 Mbps LAN ports• One 10/100/1000 Mbps WAN port• One USB 2.0 port• One USB 3.0 portAntenna Types• Four external antennasStandards• IEEE 802.11ac1,2,3• IEEE 802.11n• IEEE 802.11g• IEEE 802.11b• IEEE 802.11a• IEEE 802.3• IEEE 802.3u• IEEE 802.3abSecurity• WPATM - Personal/Enterprise• WPA2TM - Personal/Enterprise• Wi-Fi Protected Setup (WPS) PIN/PBCPower• Input: 100 to 240 V AC, 50/60 Hz• Output: 12 V DC, 1.5 ATemperature• Operating: 0 to 45 °C (32 to 113 °F)• Storage: -20 to 65 °C (-4 to 149 °F)Humidity• Operating: 10% to 90% maximum, non-condensing• Storage: 5% to 95% maximum, non-condensingCertications• FCC• CE• UL/cUL• C-Tick• IPv6• Wi-Fi Protected Setup (WPS)• Wi-Fi Multimedia (WMM)Dimensions & Weight• L x W x H: 258.8 x 184.1 x 45.5 mm (10.1 x 7.2 x 1.8 in)• 565 g ( 1.25 lbs)1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n, and 802.11ac specications. Actual data throughput will vary. Network conditions and environmental factors,including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely aect wireless signal range.2 Frequency Range varies depending on country’s regulation.3 The DIR-853 does not include 5.25-5.35 GHz & 5.47-5.725 GHz in some regions.
147D-Link DIR-853 User ManualAppendix D - Regulatory InformationRegulatory StatementsFederal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.Non-modications Statement:The grantee is not responsible for any changes or modications not expressly approved by the party responsible for compliance. Such modications could void the user's authority to operate the equipment.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Caution:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.NoteThe country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be xed to USA operational channels only.
148D-Link DIR-853 User ManualAppendix D - Regulatory InformationIMPORTANT NOTICE:FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 44 cm between the radiator and your body.Innovation, Science and Economic Development Canada (ISED) Statement:This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.Innovation, Science and Economic Development Canada (ISED) Statement:This device complies with ISED licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
149D-Link DIR-853 User ManualAppendix D - Regulatory InformationRadiation Exposure StatementThis equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 44 cm between the radiator and your body. Déclaration d'exposition aux radiationsCet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 44 cm de distance entre la source de rayonnement et votre corps.Caution :(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;(ii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specied for point-to-point and non-point-to-point operation as appropriate; and (iii) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.Avertissement:(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur an de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;(ii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e. spéciée pour l'exploitation point à point et l’exploitation non point à point, selon le cas; (iii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
150D-Link DIR-853 User ManualAppendix D - Regulatory InformationаΠ᝾ᇟ፾ҔѠ᡼Ӧ୔!٩Ᏽ!եф౗ႝݢᒟ৔܄ႝᐒᆅ౛ᒤݤಃΜΒచ;!࿶ࠠԄᇡ᛾ӝ਱ϐեф౗৔ᓎႝᐒǴߚ࿶೚ёǴϦљǵ୘ဦ܈٬Ҕޣ֡όளᏰԾᡂ׳ᓎ౗ǵуεф౗܈ᡂ׳চ೛ीϐ੝܄ϷфૈǶಃΜѤచ;!եф౗৔ᓎႝᐒϐ٬Ҕόளቹៜ०ૐӼӄϷυᘋӝݤ೯ߞǹ࿶ว౜Ԗυᘋ౜ຝਔǴᔈҥջଶҔǴ٠ׯ๓ԿคυᘋਔБளᝩុ٬ҔǶ߻໨ӝݤ೯ߞǴࡰ٩ႝߞݤೕۓբ཰ϐคጕႝ೯ߞǶեф౗৔ᓎႝᐒ໪הڙӝݤ೯ߞ܈π཰ǵࣽᏢϷᙴᕍҔႝݢᒟ৔܄ႝᐒ೛ഢϐυᘋǶ1&& ᝾ᇟǺႝᅶݢᚼ៛ໆNQF኱ྗॶ)NQF*!2!nX0dn3Ǵҁౢࠔ٬Ҕਔࡌ᝼ᔈຯᚆΓᡏ!1!dn)UHTXHQF\%DQGV)UHTXHQ]EDQG)UpTXHQFHEDQGHV%DQGDVGH)UHFXHQFLD)UHTXHQ]DH)UHTXHQWLHV0D[2XWSXW3RZHU(,530D[2XWSXW3RZHU&RQVRPPDWLRQG¶pQHUJLHPD[3RWHQFLDPi[LPDGH6DOLGD3RWHQ]DPD[2XWSXW0D[2XWSXW3RZHU5 G5.15 – 5.25 GHz 200 mW5.25 – 5.35 GHz 200 mW5.47 – 5.725 GHz 1 W2.4 G 2.4 – 2.4835 GHz 100 mW
151D-Link DIR-853 User ManualAppendix D - Regulatory InformationEuropean Community Declaration of Conformity:Česky [Czech]Tímto D-Link Corporation prohlašuje, že tento produkt, jeho příslušenství a software jsou v souladu se směrnicí 2014/53/EU. Celý text ES prohlášení o shodě vydaného EU a o rmwaru produktu lze stáhnout na stránkách k produktu www.dlink.com.Dansk [Danish]D-Link Corporation erklærer herved, at dette produkt, tilbehør og software er i overensstemmelse med direktiv 2014/53/EU. Den fulde tekst i EU-overensstemmelseserklæringen og produktrmware kan wnloades fra produktsiden hos www.dlink.com.Deutsch [German]Hiermit erklärt die D-Link Corporation, dass dieses Produkt, das Zubehör und die Software der Richtlinie 2014/53/EU entsprechen. Der vollständige Text der Konformitätserklärung der Europäischen Gemeinschaft sowie die Firmware zum Produkt stehen Ihnen zum Herunterladen von der Produktseite im Internet auf www.dlink.com zur Verfügung.Eesti [Estonian]Käesolevaga kinnitab D-Link Corporation, et see toode, tarvikud ja tarkvara on kooskõlas direktiiviga 2014/53/EL. Euroopa Liidu vastavusdeklaratsiooni täistekst ja toote püsivara on allalaadimiseks saadaval tootelehel www.dlink.com.EnglishHereby, D-Link Corporation, declares that this product, accessories, and software are in compliance with directive 2014/53/EU. The full text of the EU Declaration of Conformity and product rmware are available for download from the product page at www.dlink.comEspañol [Spanish]Por la presente, D-Link Corporation declara que este producto, accesorios y software cumplen con las directivas 2014/53/UE. El texto completo de la declaración de conformidad de la UE y el rmware del producto están disponibles y se pueden descargar desde la página del producto en www.dlink.com.Ελληνική [Greek]Με την παρούσα, η D-Link Corporation δηλώνει ότι αυτό το προϊόν, τα αξεσουάρ και το λογισμικό συμμορφώνονται με την Οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης της ΕΕ και το υλικολογισμικό του προϊόντος είναι διαθέσιμα για λήψη από τη σελίδα του προϊόντος στην τοποθεσία www.dlink.com.Français [French]Par les présentes, D-Link Corporation déclare que ce produit, ces accessoires et ce logiciel sont conformes aux directives 2014/53/UE.Le texte complet de la déclaration de conformité de l'UE et le icroprogramme du produit sont disponibles au téléchargement sur la page des produits à www.dlink.com.Italiano [Italian]Con la presente, D-Link Corporation dichiara che questo prodotto, i relativi accessori e il software sono conformi alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE e il rmware del prodotto sono disponibili per il download dalla pagina del prodotto su www.dlink.com.
152D-Link DIR-853 User ManualAppendix D - Regulatory InformationLatviski [Latvian]Ar šo uzņēmums D-Link Corporation apliecina, ka šis produkts, piederumi un programmatūra atbilst direktīvai 2014/53/ES. ES atbilstības deklarācijas pilno tekstu un produkta aparātprogrammatūru var lejupielādēt attiecīgā produkta lapā vietnē www.dlink.com.Lietuvių [Lithuanian] Šiuo dokumentu „D-Link Corporation“ pareiškia, kad šis gaminys, priedai ir programinė įranga atitinka direktyvą 2014/53/ES. Visą ES atitikties deklaracijos tekstą ir gaminio programinę aparatinę įrangą galima atsisiųsti iš gaminio puslapio adresu www.dlink.com.Nederlands [Dutch]Hierbij verklaart D-Link Corporation dat dit product, accessoires en software voldoen aan de richtlijnen 2014/53/EU. De volledige tekst van de EU conformiteitsverklaring en productrmware is beschikbaar voor download van de productpagina op www.dlink.com.Malti [Maltese]Bil-preżenti, D-Link Corporation tiddikjara li dan il-prodott, l-aċċessorji, u s-software huma konformi mad-Direttiva 2014/53/UE. Tista’ tniżżel it-test sħiħ tad-dikjarazzjoni ta’ konformità tal-UE u l-rmware tal-prodott mill-paġna tal-prodott fuq www.dlink.com.Magyar [Hungarian]Ezennel a D-Link Corporation kijelenti, hogy a jelen termék, annak tartozékai és szoftvere megfelelnek a 2014/53/EU sz. rendeletek rendelkezéseinek. Az EU Megfelelőségi nyilatkozat teljes szövege és a termék rmware a termék oldaláról tölthető le a www.dlink.com címen.Polski [Polish]D-Link Corporation niniejszym oświadcza, że ten produkt, akcesoria oraz oprogramowanie są zgodne z dyrektywami 2014/53/EU. Pełen tekst deklaracji zgodności UE oraz oprogramowanie sprzętowe do produktu można pobrać na stronie produktu w witrynie www.dlink.com.Português [Portuguese] Desta forma, a D-Link Corporation declara que este produto, os acessórios e o software estão em conformidade com a diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE e do rmwareSlovensko[Slovenian]Podjetje D-Link Corporation s tem izjavlja, da so ta izdelek, dodatna oprema in programnska oprema skladni z direktivami 2014/53/EU. Celotno besedilo izjave o skladnosti EU in vdelana programska oprema sta na voljo za prenos na strani izdelka na www.dlink.com.Slovensky [Slovak]Spoločnosť D-Link týmto vyhlasuje, že tento produkt, príslušenstvo a softvér sú v súlade so smernicou 214/53/EÚ. Úplné znenie vyhlásenia EÚ o zhode a rmvéri produktu sú k dispozícii na prevzatie zo stránky produktu www.dlink.com.Suomi [Finnish]D-Link Corporation täten vakuuttaa, että tämä tuote, lisävarusteet ja ohjelmisto ovat direktiivin 2014/53/EU vaatimusten mukaisia. Täydellinen EU-vaatimustenmukaisuusvakuutus samoin kuin tuotteen laiteohjelmisto ovat ladattavissa osoitteesta www.dlink.com.Svenska[Swedish]D-Link Corporation försäkrar härmed att denna produkt, tillbehör och programvara överensstämmer med direktiv 2014/53/EU. Hela texten med EU-försäkran om överensstämmelse och produkt-rmware kan hämtas från produktsidan på www.dlink.com.
153D-Link DIR-853 User ManualAppendix D - Regulatory InformationÍslenska [Icelandic]Hér með lýsir D-Link Corporation því yr að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun 2014/53/EB. Sækja má ESB-samræmisyrlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www.dlink.com.Norsk [Norwegian]Herved erklærer D-Link Corporation at dette produktet, tilbehøret og programvaren er i samsvar med direktivet 2014/53/EU. Den fullstendige teksten i EU-erklæring om samsvar og produktets fastvare er tilgjengelig for nedlasting fra produktsiden på www.dlink.com.Warning Statement:The power outlet should be near the device and easily accessible.
154D-Link DIR-853 User ManualAppendix D - Regulatory InformationNOTICE OF WIRELESS RADIO LAN USAGE IN THE EUROPEAN COMMUNITY FOR WIRELESS PRODUCT ONLY:• This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the potential for interference.• This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries. This equipment may be operated in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, and CY.Usage Notes:• To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be applied on the products according to the country where the equipment will be deployed.• This device is restricted from functioning in Ad-hoc mode while operating in 5 GHz. Ad-hoc mode is direct peer-to-peer communication between two client devices without an Access Point.• Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating in 5 GHz band within the EU.• Please refer to the product manual or datasheet to check whether your product uses 2.4 GHz and/or 5 GHz wireless.HINWEIS ZUR VERWENDUNG VON DRAHTLOS-NETZWERK (WLAN) IN DER EUROPÄISCHEN GEMEINSCHAFT ( NUR FÜR EIN DRAHTLOSES PRODUKT )• Der Betrieb dieses Geräts in der Europäischen Gemeinschaft bei Nutzung von Kanälen im 5,15-5,35 GHz Frequenzband ist ausschließlich auf Innenräume beschränkt, um das Interferenzpotential zu reduzieren.• Bei diesem Gerät handelt es sich um ein zum Einsatz in allen EU-Mitgliedsstaaten und in EFTA-Ländern - ausgenommen Frankreich. Der Betrieb dieses Geräts ist in den folgenden Ländern erlaubt: AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CYGebrauchshinweise:• Um den in Europa geltenden nationalen Vorschriften zum Nutzen des Funkspektrums weiterhin zu entsprechen, werden Frequenz und Kanalbeschränkungen, dem jeweiligen Land, in dem das Gerät zum Einsatz kommt, entsprechend, auf die Produkte angewandt.• Die Funktionalität im Ad-hoc-Modus bei Betrieb auf 5 GHz ist für dieses Gerät eingeschränkt. Bei dem Ad-hoc-Modus handelt es sich um eine Peer-to-Peer-Kommunikation zwischen zwei Client-Geräten ohneeinen Access Point.• Access Points unterstützen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb auf 5 GHz innerhalb der EU.• Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt.
155D-Link DIR-853 User ManualAppendix D - Regulatory InformationAVIS CONCERNANT L'UTILISATION DE LA RADIO SANS FIL LAN DANS LA COMMUNAUTÉ EUROPÉENNE (UNIQUEMENT POUR LES PRODUITS SANS FIL)• Cet appareil est limité à un usage intérieur lorsqu'il est utilisé dans la Communauté européenne sur les canaux de la bande de 5,15 à 5,35 GHz an de réduire les risques d'interférences.• Cet appareil est un système de transmission à large bande (émetteur-récepteur) de 2,4 GHz, destiné à être utilisé dans tous les États-membres de l'UE et les pays de l'AELE. Cet équipement peut être utilisé dans les pays suivants : AL, AD, BE , BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT , MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CYNotes d'utilisation:• Pour rester en conformité avec la réglementation nationale européenne en matière d'utilisation du spectre, des limites de fréquence et de canal seront appliquées aux produits selon le pays où l'équipement sera déployé.• Cet appareil ne peut pas utiliser le mode Ad-hoc lorsqu'il fonctionne dans la bande de 5 GHz. Le mode Adhoc fournit une communication directe pair à pair entre deux périphériques clients sans point d'accès.• Les points d'accès prendront en charge les fonctionnalités DFS (Dynamic Frequency Selection) et TPC (Transmit Power Control) au besoin lors du fonctionnement dans la bande de 5 GHz au sein de l'UE.• Merci de vous référer au guide d'utilisation ou de la che technique an de vérier si votre produit utilise 2.4 GHz et/ou 5 GHz sans l.AVISO DE USO DE LA LAN DE RADIO INALÁMBRICA EN LA COMUNIDAD EUROPEA (SOLO PARA EL PRODUCTO INALÁMBRICO)• El uso de este dispositivo está restringido a interiores cuando funciona en la Comunidad Europea utilizando canales en la banda de 5,15-5,35 GHz, para reducir la posibilidad de interferencias.• Este dispositivo es un sistema de transmisión (transceptor) de banda ancha de 2,4 GHz, pensado para su uso en todos los estados miembros de la UE y en los países de la AELC. Este equipo se puede utilizar en AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CYNotas de uso:• Para seguir cumpliendo las normas europeas de uso del espectro nacional, se aplicarán limitaciones de frecuencia y canal en los productos en función del país en el que se pondrá en funcionamiento el equipo.• Este dispositivo tiene restringido el funcionamiento en modo Ad-hoc mientras funcione a 5 Ghz. El modo Ad-hoc es la comunicación directa de igual a igual entre dos dispositivos cliente sin un punto de acceso.• Los puntos de acceso admitirán la funcionalidad DFS (Selección de frecuencia dinámica) y TPC (Control de la potencia de transmisión) si es necesario cuando funcionan a 5 Ghz dentro de la UE.• Por favor compruebe el manual o la cha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz.
156D-Link DIR-853 User ManualAppendix D - Regulatory InformationAVVISO PER L’USO DI LAN RADIO WIRELESS NELLA COMUNITÀ EUROPEA (SOLO PER PRODOTTI WIRELESS)• Nella Comunità europea, l’uso di questo dispositivo è limitato esclusivamente agli ambienti interni sui canali compresi nella banda da 5,15 a 5,35 GHz al ne di ridurre potenziali interferenze. Questo dispositivo è un sistema di trasmissione a banda larga a 2,4 GHz (ricetrasmittente), destinato all’uso in tutti gli stati membri dell’Unione europea e nei paesi EFTA.• Questo dispositivo può essere utilizzato in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CYNote per l’uso• Al ne di mantenere la conformità alle normative nazionali europee per l’uso dello spettro di frequenze, saranno applicate limitazioni sulle frequenze e sui canali per il prodotto in conformità alle normative del paese in cui il dispositivo viene utilizzato.• Questo dispositivo non può essere attivato in modalità Ad-hoc durante il funzionamento a 5 Ghz. La modalità Ad-hoc è una comunicazione diretta peer-to-peer fra due dispositivi client senza un punto di accesso.• I punti di accesso supportano le funzionalità DFS (Dynamic Frequency Selection) e TPC (Transmit Power Control) richieste per operare a 5 Ghz nell’Unione europea.• Ti invitiamo a fare riferimento al manuale del prodotto o alla scheda tecnica per vericare se il tuo prodotto utilizza le frequenze 2,4 GHz e/o 5 GHz.KENNISGEVING VAN DRAADLOOS RADIO LAN-GEBRUIK IN DE EUROPESE GEMEENSCHAP (ALLEEN VOOR DRAADLOOS PRODUCT)• Dit toestel is beperkt tot gebruik binnenshuis wanneer het wordt gebruikt in de Europese Gemeenschap gebruik makend van kanalen in de 5.15-5.35 GHz band om de kans op interferentie te beperken.• Dit toestel is een 2.4 GHz breedband transmissiesysteem (transceiver) dat bedoeld is voor gebruik in alle EU lidstaten en EFTA landen. Deze uitrusting mag gebruikt worden in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CYGebruiksaanwijzingen:• Om de gebruiksvoorschriften van het Europese Nationale spectrum na te leven, zullen frequentie- en kanaalbeperkingen worden toegepast op de producten volgens het land waar de uitrusting gebruikt zal worden.• Dit toestel kan niet functioneren in Ad-hoc mode wanneer het gebruikt wordt in 5 GHz. Ad-hoc mode is directe peer-to-peer communicatie tussen twee klantenapparaten zonder een toegangspunt.• Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik in 5 GHz binnen de EU.• Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz.
157D-Link DIR-853 User ManualAppendix D - Regulatory InformationSAFETY INSTRUCTIONSThe following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details.• Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product.• Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read and follow the instructions in the user manual.• Do not spill food or liquid on your product and never push any objects into the openings of your product.• Do not use this product near water, areas with high humidity, or condensation unless the product is specically rated for outdoor application.• Keep the product away from radiators and other heat sources.• Always unplug the product from mains power before cleaning and use a dry lint free cloth only.SICHERHEITSVORSCHRIFTENDie folgenden allgemeinen Sicherheitsvorschriften dienen als Hilfe zur Gewährleistung Ihrer eigenen Sicherheit und zum Schutz Ihres Produkts. Weitere Details nden Sie in den Benutzeranleitungen zum Produkt.• Statische Elektrizität kann elektronischen Komponenten schaden. Um Schäden durch statische Auadung zu vermeiden, leiten Sie elektrostatische Ladungen von Ihrem Körper ab, (z. B. durch Berühren eines geerdeten blanken Metallteils), bevor Sie das Produkt berühren.• Unterlassen Sie jeden Versuch, das Produkt zu warten, und versuchen Sie nicht, es in seine Bestandteile zu zerlegen. Für einige Produkte mit austauschbaren Akkus lesen Sie bitte das Benutzerhandbuch und befolgen Sie die dort beschriebenen Anleitungen.• Vermeiden Sie, dass Speisen oder Flüssigkeiten auf Ihr Produkt gelangen, und stecken Sie keine Gegenstände in die Gehäuseschlitze oder -önungen Ihres Produkts.• Verwenden Sie dieses Produkt nicht in unmittelbarer Nähe von Wasser und nicht in Bereichen mit hoher Luftfeuchtigkeit oder Kondensation, es sei denn, es ist speziell zur Nutzung in Außenbereichen vorgesehen und eingestuft.• Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen.• Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch.
158D-Link DIR-853 User ManualAppendix D - Regulatory InformationCONSIGNES DE SÉCURITÉLes consignes générales de sécurité ci-après sont fournies an d’assurer votre sécurité personnelle et de protéger le produit d’éventuels dommages. Veuillez consulter les consignes d’utilisation du produit pour plus de détails.• L’électricité statique peut endommager les composants électroniques. Déchargez l’électricité statique de votre corps (en touchant un objet en métal relié à la terre par exemple) avant de toucher le produit.• N’essayez pas d’intervenir sur le produit et ne le démontez jamais. Pour certains produits contenant une batterie remplaçable par l’utilisateur, veuillez lire et suivre les consignes contenues dans le manuel d’utilisation.• Ne renversez pas d’aliments ou de liquide sur le produit et n’insérez jamais d’objets dans les orices.• N’utilisez pas ce produit à proximité d’un point d’eau, de zones très humides ou de condensation sauf si le produit a été spéciquement conçu pour une application extérieure.• Éloignez le produit des radiateurs et autres sources de chaleur.• Débranchez toujours le produit de l’alimentation avant de le nettoyer et utilisez uniquement un chion sec non pelucheux.INSTRUCCIONES DE SEGURIDADLas siguientes directrices de seguridad general se facilitan para ayudarle a garantizar su propia seguridad personal y para proteger el producto frente a posibles daños. No olvide consultar las instrucciones del usuario del producto para obtener más información.• La electricidad estática puede resultar nociva para los componentes electrónicos. Descargue la electricidad estática de su cuerpo (p. ej., tocando algún metal sin revestimiento conectado a tierra) antes de tocar el producto.• No intente realizar el mantenimiento del producto ni lo desmonte nunca. Para algunos productos con batería reemplazable por el usuario, lea y siga las instrucciones del manual de usuario.• No derrame comida o líquidos sobre el producto y nunca deje que caigan objetos en las aberturas del mismo.• No utilice este producto cerca del agua, en zonas con humedad o condensación elevadas a menos que el producto esté clasicado especícamente para aplicación en exteriores.• Mantenga el producto alejado de los radiadores y de otras fuentes de calor.• Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa.
159D-Link DIR-853 User ManualAppendix D - Regulatory InformationISTRUZIONI PER LA SICUREZZALe seguenti linee guida sulla sicurezza sono fornite per contribuire a garantire la sicurezza personale degli utenti e a proteggere il prodotto da potenziali danni. Per maggiori dettagli, consultare le istruzioni per l’utente del prodotto.• L’elettricità statica può essere pericolosa per i componenti elettronici. Scaricare l’elettricità statica dal corpo (ad esempio toccando una parte metallica collegata a terra) prima di toccare il prodotto. • Non cercare di riparare il prodotto e non smontarlo mai. Per alcuni prodotti dotati di batteria sostituibile dall’utente, leggere e seguire le istruzioni riportate nel manuale dell’utente.• Non versare cibi o liquidi sul prodotto e non spingere mai alcun oggetto nelle aperture del prodotto.• Non usare questo prodotto vicino all’acqua, in aree con elevato grado di umidità o soggette a condensa a meno che il prodotto non sia specicatamente approvato per uso in ambienti esterni.• Tenere il prodotto lontano da caloriferi e altre fonti di calore.• Scollegare sempre il prodotto dalla presa elettrica prima di pulirlo e usare solo un panno asciutto che non lasci lacce.VEILIGHEIDSINFORMATIEDe volgende algemene veiligheidsinformatie werd verstrekt om uw eigen persoonlijke veiligheid te waarborgen en uw product te beschermen tegen mogelijke schade. Denk eraan om de gebruikersinstructies van het product te raadplegen voor meer informatie.• Statische elektriciteit kan schadelijk zijn voor elektronische componenten. Ontlaad de statische elektriciteit van uw lichaam (d.w.z. het aanraken van geaard bloot metaal) voordat uhet product aanraakt.• U mag nooit proberen het product te onderhouden en u mag het product nooit demonteren. Voor sommige producten met door de gebruiker te vervangen batterij, dient u de instructies in de gebruikershandleiding te lezen en te volgen.• Mors geen voedsel of vloeistof op uw product en u mag nooit voorwerpen in de openingen van uw product duwen.• Gebruik dit product niet in de buurt van water, gebieden met hoge vochtigheid of condensatie, tenzij het product speciek geclassiceerd is voor gebruik buitenshuis.• Houd het product uit de buurt van radiators en andere warmtebronnen.• U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek.
160D-Link DIR-853 User ManualAppendix D - Regulatory InformationDisposing and Recycling Your Product ENGLISH ENThis symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has reached the end of its life, some will accept products for free. By recycling the product and its packaging in this manner you help to conserve the environment and protect human health.D-Link and the EnvironmentAt D-Link, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimise this impact D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging.D-Link recommends that you always switch o or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.To learn more about our environmentally responsible products and packaging please visit www.dlinkgreen.com.DEUTSCH DEDieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gemäß bestehender örtlicher Gesetze und Vorschriften nicht über den normalen Hausmüll entsorgt werden sollte, sondern einer Wiederverwertung zuzuführen ist. Bringen Sie es bitte zu einer von Ihrer Kommunalbehörde entsprechend amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende seiner Nutzungsdauer erreicht hat. Für die Annahme solcher Produkte erheben einige dieser Stellen keine Gebühren. Durch ein auf diese Weise durchgeführtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die menschliche Gesundheit zu schützen.D-Link und die UmweltD-Link ist sich den möglichen Auswirkungen seiner Geschäftstätigkeiten und seiner Produkte auf die Umwelt bewusst und fühlt sich verpichtet, diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D-Link seine Produkte mit dem Ziel größtmöglicher Umweltfreundlichkeit her und verwendet wiederverwertbare, schadstoarme Materialien bei Produktherstellung und Verpackung.D-Link empehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf diese Weise helfen Sie, Energie zu sparen und CO2-Emissionen zu reduzieren.Wenn Sie mehr über unsere umweltgerechten Produkte und Verpackungen wissen möchten, nden Sie entsprechende Informationen im Internet unter www.dlinkgreen.com.
161D-Link DIR-853 User ManualAppendix D - Regulatory InformationFRANÇAIS FRCe symbole apposé sur le produit ou son emballage signie que, conformément aux lois et règlementations locales, ce produit ne doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un point de collecte prévu à cet eet par les autorités locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manière, vous aidez à préserver l’environnement et à protéger la santé de l’homme.D-Link et l’environnementChez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.D-Link recommande de toujours éteindre ou débrancher vos produits D-Link lorsque vous ne les utilisez pas. Vous réaliserez ainsi des économies d’énergie et réduirez vos émissions de CO2.Pour en savoir plus sur les produits et emballages respectueux de l’environnement, veuillez consulter le www.dlinkgreen.com.ESPAÑOL ESEste símbolo en el producto o el embalaje signica que, de acuerdo con la legislación y la normativa local, este producto no se debe desechar en la basura doméstica sino que se debe reciclar. Llévelo a un punto de recogida designado por las autoridades locales una vez que ha llegado al n de su vida útil; algunos de ellos aceptan recogerlos de forma gratuita. Al reciclar el producto y su embalaje de esta forma, contribuye a preservar el medio ambiente y a proteger la salud de los seres humanos.D-Link y el medio ambienteEn D-Link, comprendemos y estamos comprometidos con la reducción del impacto que puedan tener nuestras actividades y nuestros productos en el medio ambiente. Para reducir este impacto, D-Link diseña y fabrica sus productos para que sean lo más ecológicos posible, utilizando materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje.D-Link recomienda apagar o desenchufar los productos D-Link cuando no se estén utilizando. Al hacerlo, contribuirá a ahorrar energía y a reducir las emisiones de CO2.Para obtener más información acerca de nuestros productos y embalajes ecológicos, visite el sitio www.dlinkgreen.com.
162D-Link DIR-853 User ManualAppendix D - Regulatory InformationITALIANO ITLa presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi e alle normative locali, questo prodotto non deve essere smaltito nei riuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il prodotto presso un punto di raccolta indicato dalle autorità locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti da riciclare. Scegliendo di riciclare il prodotto e il relativo imballaggio, si contribuirà a preservare l'ambiente e a salvaguardare la salute umana.D-Link e l'ambienteD-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre al minimo tale impatto, D-Link progetta e realizza i propri prodotti in modo che rispettino il più possibile l'ambiente, utilizzando materiali riciclabili a basso tasso di tossicità sia per i prodotti che per gli imballaggi.D-Link raccomanda di spegnere sempre i prodotti D-Link o di scollegarne la spina quando non vengono utilizzati. In questo modo si contribuirà a risparmiare energia e a ridurre le emissioni di anidride carbonica.Per ulteriori informazioni sui prodotti e sugli imballaggi D-Link a ridotto impatto ambientale, visitate il sito all'indirizzo www.dlinkgreen.com.NEDERLANDS NLDit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet mag worden weggegooid met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra het product het einde van de levensduur heeft bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe werd aangeduid door uw plaatselijke autoriteiten, sommige autoriteiten accepteren producten zonder dat u hiervoor dient te betalen. Door het product en de verpakking op deze manier te recyclen helpt u het milieu en de gezondheid van de mens te beschermen.D-Link en het milieuBij D-Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze impact te beperken, ontwerpt en bouwt D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking.D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en verpakkingen.
163D-Link DIR-853 User ManualAppendix D - Regulatory InformationPOLSKI PLTen symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi przepisami niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz należy go poddać procesowi recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do tego celu podmioty przyjmą takie produkty nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki wskazanego przez lokalne władze. Poprzez proces recyklingu i dzięki takiemu postępowaniu z produktem oraz jego opakowaniem, pomogą Państwo chronić środowisko naturalne i dbać o ludzkie zdrowie.D-Link i środowiskoD-Link podchodzimy w sposób świadomy do ochrony otoczenia oraz jesteśmy zaangażowani w zmniejszanie wpływu naszych działań i produktów na środowisko naturalne. W celu zminimalizowania takiego wpływu rma D-Link konstruuje i wytwarza swoje produkty w taki sposób, aby były one jak najbardziej przyjazne środowisku, stosując do tych celów materiały nadające się do powtórnego wykorzystania, charakteryzujące się małą toksycznością zarówno w przypadku samych produktów jak i opakowań.Firma D-Link zaleca, aby Państwo zawsze prawidłowo wyłączali z użytku swoje produkty D-Link, gdy nie są one wykorzystywane. Postępując w ten sposób pozwalają Państwo oszczędzać energię i zmniejszać emisje CO2.Aby dowiedzieć się więcej na temat produktów i opakowań mających wpływ na środowisko prosimy zapoznać się ze stroną Internetową www.dlinkgreen.com.ČESKY CZTento symbol na výrobku nebo jeho obalu znamená, že podle místně platných předpisů se výrobek nesmí vyhazovat do komunálního odpadu, ale odeslat k recyklaci. Až výrobek doslouží, odneste jej prosím na sběrné místo určené místními úřady k tomuto účelu. Některá sběrná místa přijímají výrobky zdarma. Recyklací výrobku i obalu pomáháte chránit životní prostředí i lidské zdraví.D-Link a životní prostředíVe společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.Společnost D-Link doporučuje, abyste své výrobky značky D-Link vypnuli nebo vytáhli ze zásuvky vždy, když je nepoužíváte. Pomůžete tak šetřit energii a snížit emise CO2.Více informací o našich ekologických výrobcích a obalech najdete na adrese www.dlinkgreen.com.
164D-Link DIR-853 User ManualAppendix D - Regulatory InformationMAGYAR HUEz a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak megfelelően ez a termék nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra kell küldeni. Kérjük, hogy a termék élettartamának elteltét követően vigye azt a helyi hatóság által kijelölt gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők. A termék és a csomagolás újrahasznosításával segíti védeni a környezetet és az emberek egészségét.A D-Link és a környezetA D-Linknél megértjük és elkötelezettek vagyunk a műveleteink és termékeink környezetre gyakorolt hatásainak csökkentésére. Az ezen hatás csökkentése érdekében a D-Link a lehető leginkább környezetbarát termékeket tervez és gyárt azáltal, hogy újrahasznosítható, alacsony károsanyag-tartalmú termékeket gyárt és csomagolásokat alkalmaz.A D-Link azt javasolja, hogy mindig kapcsolja ki vagy húzza ki a D-Link termékeket a tápforrásból, ha nem használja azokat. Ezzel segít az energia megtakarításában és a széndioxid kibocsátásának csökkentésében.Környezetbarát termékeinkről és csomagolásainkról további információkat a www.dlinkgreen.com weboldalon tudhat meg.NORSK NODette symbolet på produktet eller forpakningen betyr at dette produktet ifølge lokale lover og forskrifter ikke skal kastes sammen med husholdningsavfall, men leveres inn til gjenvinning. Vennligst ta det til et innsamlingssted anvist av lokale myndigheter når det er kommet til slutten av levetiden. Noen steder aksepteres produkter uten avgift. Ved på denne måten å gjenvinne produktet og forpakningen hjelper du å verne miljøet og beskytte folks helse.D-Link og miljøetHos D-Link forstår vi oss på og er forpliktet til å minske innvirkningen som vår drift og våre produkter kan ha på miljøet. For å minimalisere denne innvirkningen designer og lager D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen.D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.For mer informasjon angående våre miljøansvarlige produkter og forpakninger kan du gå til www.dlinkgreen.com.
165D-Link DIR-853 User ManualAppendix D - Regulatory InformationDANSK DKDette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må bortskaes som husholdningsaald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder, når det er nået til slutningen af dets levetid. I nogle tilfælde vil produktet blive modtaget gratis. Ved at indlevere produktet og dets emballage til genbrug på denne måde bidrager du til at beskytte miljøet og den menneskelige sundhed.D-Link og miljøetHos D-Link forstår vi og bestræber os på at reducere enhver indvirkning, som vores aktiviteter og produkter kan have på miljøet. For at minimere denne indvirkning designer og producerer D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage.D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.Du kan nde ere oplysninger om vores miljømæssigt ansvarlige produkter og emballage på www.dlinkgreen.com.SUOMI FITämä symboli tuotteen pakkauksessa tarkoittaa, että paikallisten lakien ja säännösten mukaisesti tätä tuotetta ei pidä hävittää yleisen kotitalousjätteen seassa vaan se tulee toimittaa kierrätettäväksi. Kun tuote on elinkaarensa päässä, toimita se lähimpään viranomaisten hyväksymään kierrätyspisteeseen. Kierrättämällä käytetyn tuotteen ja sen pakkauksen autat tukemaan sekä ympäristön että ihmisten terveyttä ja hyvinvointia.D-Link ja ympäristöD-Link ymmärtää ympäristönsuojelun tärkeyden ja on sitoutunut vähentämään tuotteistaan ja niiden valmistuksesta ympäristölle mahdollisesti aiheutuvia haittavaikutuksia. Nämä negatiiviset vaikutukset minimoidakseen D-Link suunnittelee ja valmistaa tuotteensa mahdollisimman ympäristöystävällisiksi käyttämällä kierrätettäviä, alhaisia pitoisuuksia haitallisia aineita sisältäviä materiaaleja sekä tuotteissaan että niiden pakkauksissa.Suosittelemme, että irrotat D-Link-tuotteesi virtalähteestä tai sammutat ne aina, kun ne eivät ole käytössä. Toimimalla näin autat säästämään energiaa ja vähentämään hiilidioksiidipäästöjä.Lue lisää ympäristöystävällisistä D-Link-tuotteista ja pakkauksistamme osoitteesta www.dlinkgreen.com.
166D-Link DIR-853 User ManualAppendix D - Regulatory InformationSVENSKA SEDen här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter inte skall kastas i hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din lokala myndighet utsedd uppsamlingsplats, vissa accepterar produkter utan kostnad. Genom att på detta sätt återvinna produkten och förpackningen hjälper du till att bevara miljön och skydda människors hälsa.D-Link och miljönPå D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och förpackningar.D-Link rekommenderar att du alltid stänger av eller kopplar ur dina D-Link produkter när du inte använder dem. Genom att göra detta hjälper du till att spara energi och minska utsläpp av koldioxid.För mer information om våra miljöansvariga produkter och förpackningar www.dlinkgreen.com.PORTUGUÊS PTEste símbolo no produto ou embalagem signica que, de acordo com as leis e regulamentações locais, este produto não deverá ser eliminado juntamente com o lixo doméstico mas enviado para a reciclagem. Transporte-o para um ponto de recolha designado pelas suas autoridades locais quando este tiver atingido o m da sua vida útil, alguns destes pontos aceitam produtos gratuitamente. Ao reciclar o produto e respectiva embalagem desta forma, ajuda a preservar o ambiente e protege a saúde humana.A D-Link e o ambienteNa D-Link compreendemos e comprometemo-nos com a redução do impacto que as nossas operações e produtos possam ter no ambiente. Para minimizar este impacto a D-Link concebe e constrói os seus produtos para que estes sejam o mais inofensivos para o ambiente possível, utilizando meteriais recicláveis e não tóxicos tanto nos produtos como nas embalagens.A D-Link recomenda que desligue os seus produtos D-Link quando estes não se encontrarem em utilização. Com esta acção ajudará a poupar energia e reduzir as emissões de CO2.Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite www.dlinkgreen.com.

Navigation menu