User Manual rev
User Manual
Version 1.00 | 12/14/2016
DSH-C310
Omna 180Cam HD
2D-Link DSH-C310 User Manual
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or
organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and
change.
Manual Revisions
Revision Date Description
1.0 December 14, 2016 DSH-C310 Revision A1 with rmware version 1.00
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other
countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Copyright © 2016 D-Link Corporation.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation.
Preface
3D-Link DSH-C310 User Manual
Table of Contents
Product Overview........................................................ 4
Package Contents................................................................. 4
System Requirements ......................................................... 4
Hardware Overview ............................................................. 5
Installation................................................................... 6
Getting Started...................................................................... 6
Remote Access....................................................................... 8
Settings ........................................................................ 9
Regulatory Information............................................10
4D-Link DSH-C310 User Manual
Section 1: Product Overview
Product Overview
Package Contents
DSH-C310 Omna 180Cam HD
Power Adapter
Quick Start Guide
If any of the above items are missing, please contact your reseller.
iPhone, iPad, or iPod Touch capable of running iOS 10 or higher
Apple TV (4th generation) or iPad running iOS 10 or higher is required for remote access
System Requirements
5D-Link DSH-C310 User Manual
Section 1: Product Overview
Hardware Overview
1 IR LEDs (behind cover) Infrared LEDs illuminate the camera's eld of view at night
2 Light Sensor Detects ambient light to automatically switch between day and night mode
3 Microphone Picks up audio from surrounding area
4 180-Degree Camera Lens Fixed lens to record video of the surrounding area
5 Status LED Indicates the connection status of the camera
6MicroUSB Port
(for power) Connects to the power adapter
7 microSD Card Slot Insert a microSD card to record video when motion is detected
8 Reset Button Press and hold for 10 seconds to reset camera back to the factory default
settings
23
56
78
4
1
6D-Link DSH-C310 User Manual
Section 2: Installation
Installation
Getting Started
Step 1
Connect the power adapter to your camera and plug the adapter in to a power outlet.
Step 2
Wait about a minute until the LED on the camera changes from red to blinking orange.
7D-Link DSH-C310 User Manual
Section 2: Installation
Step 3
Download the Omna app from the App Store to your iPhone or iPad.
Step 4
Open the Omna app and tap on the + in the top-right corner. Follow the instructions to set
up and congure your camera.
When asked for your camera's HomeKit Code, refer to the sticker attached to the camera or
on the back of the Quick Start Guide included in your package.
My Home
8D-Link DSH-C310 User Manual
Section 2: Installation
Remote Access
In order to access your camera remotely using the Home app, you will need to set up an Apple
TV (4th generation) or iPad capable of running iOS 10 or higher to act as your HomeHub.
For more information, visit support.apple.com/HT207057
9D-Link DSH-C310 User Manual
Section 3: Settings
Settings
To view your camera's settings, open the Omna app, go to the Settings menu, tap Accessory, then select your camera from the list.
Camera Image:
Accessory
Name:
Accessory
Room:
Set to my
favorites:
Motion
Detection:
SD Recording:
Time Zone:
Firmware
Upgrade:
Remove
Accessory:
You can tap on the camera icon to change the image used to identify your
camera.
Tap this to change the name used to identify your camera.
Tap this to change which room the camera is assigned to.
Tap this to mark this camera as a favorite for quick access to it.
Tap this to open the motion detection page, where you can enable
motion detection, dene what areas to monitor, set the motion detection
sensitivity, and set the motion retrigger delay.
Tap this to open the SD settings page, where you can enable SD card
recording and format an inserted microSD card.
Tap this to set the time zone of the camera. This will help to ensure that the
correct time is used when marking recordings.
Tap this to go to the rmware upgrade page, where you can check for new
rmware and upgrade to a newer version if available.
Tap this to remove the camera from your account.
10D-Link DSH-C310 User Manual
Appendix A: Regulatory Information
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Non-modications Statement:
Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this
equipment.
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance
with FCC multi-transmitter product procedures. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection
of other channels is not possible.
Note
The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in
the USA must be xed to USA operational channels only.
11D-Link DSH-C310 User Manual
Appendix A: Regulatory Information
Innovation, Science and Economic Development Canada (ISED) Statement:
This device complies with ISED licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel
mobile satellite systems;
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur an de réduire les risques
de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p.
limits specied for point-to-point and non-point-to-point operation as appropriate;
(ii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e.
spéciée pour l'exploitation point à point et l’exploitation non point à point, selon le cas;
(iii) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5650-5850 MHz and that
these radars could cause interference and/or damage to LE-LAN devices.
(iii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-
à-d., qu’ils ont la priorité) pour les bandes 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs
LAN-EL.
IMPORTANT NOTICE:
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator and your body.
This unit to be used with the included power supply.
12D-Link DSH-C310 User Manual
Appendix A: Regulatory Information
以下警語適用台灣地區
依據 低功率電波輻射性電機管理辦法
第十二條: 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功
能。
第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使
用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干
擾。
NCC 警語：
Radiation Exposure Statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator and your body.
Déclaration d'exposition aux radiations
Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement
doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.