D Link WA110A1 Wireless G USB Adapter User Manual part 1

D Link Corporation Wireless G USB Adapter part 1

Contents

user manual part 1

Image1.jpg
2D-Link DWA-110 Quick Install Guide A computer or laptop with an available USB 2.0 port Windows® 2000 or XP 300MHz processor and at least 64MB of RAM Properly installed and working USB Controller An 802.11g or 802.11b access point (for Infrastructure mode), or another 802.11g or 802.11b wireless adapter (for Ad-Hoc networking mode.)Package ContentsSystem RequirementsIf any of the above items are missing, please contact your reseller.D-Link DWA-110Wireless G USB 2.0 AdapterCradleManual, software, and warranty on CD
3 D-Link DWA-110 Quick Install GuideHardware OverviewUSB PortUsed to connect the DWA-110 to your computer.
4D-Link DWA-110 Quick Install GuideThe DWA-110 lets you access your stored data and media les using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:4 Keep the number of walls and ceilings between the DWA-110 other network devices to a minimum - each wall or ceiling can reduce your DWA-110’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.1Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.23Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.5Wireless Installation Considerations

Navigation menu