D O Tel DOTH-300S INDUSTRIAL PDA User Manual USERS MANUAL 1

Download:
Mirror Download [FCC.gov]
Document ID	2091967
Application ID	R3l8aua9FOts70HKKg/ubA==
Document Description	USERS MANUAL 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	229.91kB (2873853 bits)
Date Submitted	2013-10-17 00:00:00
Date Available	2014-04-15 00:00:00
Creation Date	2013-10-02 16:46:20
Producing Software	doPDF Ver 7.3 Build 387 (Windows XP Home Edition (SP 3) - Version: 5.1.2600 (x86))
Document Lastmod	2013-10-02 16:47:07
Document Title	USERS MANUAL 1

시작하기 전에...
DOTH-300S User’s Manual
Before
starting…
시작하기
전에...
1.
This user manual may be changed without notice in accordance with
improvements to the product or changes in available functions.
2.
This user manual has been prepared based on information available at the
time of publishing and may have technical or editorial errors or omissions.
3.
The screen and shape of the product in this manual may differ from that of
the actual product.
4.
All the content of this manual is protected by Copyright Law.
5.
All the rights for the software installed on this product belong to DOTel Co.,
Ltd. And are protected by Copyright Law.
6.
Among the content specified in this manual, some functions may not be
installed in your PDA (Wireless LAN, Bluetooth)
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions.
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change to the antenna or
the device is permitted. Any change to the antenna or the device could result in the device
exceeding the RF exposure requirements and void user's authority to operate the device.
During transmitter operation, in order to meet RF maximum permissible Exposure Safety
Guidelines, a minimum distance of 0cm shall be maintained between this device and
personnel.
This equipment may generate or use frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved
in the instruction manual. The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
Consent on Copyright and Use…
1.
All the contents in this manual and PDA software are protected by Copyright
Law and all the rights belong to DOTel Co., Ltd.
2.
No part of this manual may be duplicated, renovated or translated into other
languages without a prior written consent. We notify you in advance that act
of duplicating, correcting or distributing this manual without permission will
be an object of criminal punishment in accordance with Copyright Law.
3.
As to instructions for separate business programs not specified in this
manual, and questions about and after service for such programs, please
contact the software provider.
4.
For all other application programs loaded separately onto this product except
the basic program, each product provider should specify contact information
required to make inquiries or ask for technical support on the product
manual or on the packing box, or enclose a separate manual with contact
information.
5.
DOTel Co., Ltd. Does not provide any warranty for all the software units
loaded after PDAs are shipped out of the factory.
6.
DOT is a trademark of DOTel Co., Ltd. protected by law.
7.
The logos and product names, Microsoft, Windows and Internet
Explorer, are trademarks of Microsoft and MS Windows CE software
loaded in this product is a product officially licensed by Microsoft.
8.
All the product names and program names used in this manual and the
product are company names, symbols, trademarks or registered
trademarks of each owner.
9.
DOTel Co., Ltd. may ask the application program providers to provide
their software loaded in this product on request of mobile
communication providers or for improvement or verification of the
products.
Table of Contents
1.
Important Notices…
2.
Before Using
2.1 Package Components
2.2 Product Description
2.3 To connect with a PC
3. User Interface
3.1 About the Home Screen
3.2 Title Bar Status Icons
4. Using the Phone
4.1 To use the phone function
4.2 To use the text message function
5. Applications
5.1 Data communication Applications
5.2 Bluetooth Applications
6. Others
6.1 Problem solving
6.2 Guidance on customer support and after service
6.3 Product Warranty
6.4 Communication and Product Specification
6.5 System Product Specification
1. Important Notices…
Do not use the product while driving. Be sure to observe traffic related laws as,
!! otherwise, it may cause a car accident.
Be sure to carefully read this user manual as not observing the cautions may cause
injury of the user or other persons, or physical losses.
The manufacturer and seller do not take any responsibilities for all the accidents
occurred due to not observing the cautions specified in this manual.
This product should be used only for the established purpose. Do not use the
product for other purposes than those specified in the user manual.
Be careful not to hurt your hands when handling the product box, manual and
component parts.
If there is smell of burn or excessive heat from the product while in use, remove
the battery and immediately contact the after service center guided in this manual.
Be sure to use the product in a bright place to protect your eyesight, as looking into
the LCD screen in a dark place for a long period of time may hurt your eyesight.
We recommend you to back up important data in this product without fail. The
seller and manufacturer do not take any responsibility for data loss. Especially,
when you ask for repair of the product, be sure to back up the data. The
manufacturer and seller as well as the after service center do not take any
responsibility for data loss.
Do not place the product near magnets or magnetic fields. It may cause failure of
the product.
1. Important Notices…
!!
Do not handle the product with wet hands as it may cause malfunction of the
product and, especially, if the AC adapter is handled with wet hands, there is a risk
of electric shock.
Use the LCD screen with a stylus pen provided by the manufacturer or a tool not
pointed. Otherwise, the LCD may be damaged.
The film attached on the LCD is a film used to protect the LCD. If the product is
used with the film on, accurate operation may not be achieved. Be sure to use the
product after replacing the film with the LCD protection film separately provided.
When using USB cable, adapter and snap-on, be careful with the direction of
connector insertion. If it is inserted the other way around, it may cause a problem
for PDA or PC. Also, do not use extremely bent or pressed by heavy object cable.
The product may not properly operate in very cold winter or hot summer. The
proper operating temperature is between -10ºC ~ 50ºC. Be especially careful to
avoid storing the product in a place too hot or cold, or too moist. This may cause
external change or product damage.
In following cases, warranty service will not provided or repairing may be
impossible:
-If the product has been disassembled or remodeled by user’s self;
-If the product has fallen into the water or stored in a moist place for
a long period of time;
-If the product has been dropped from a high place or received
excessive external shock.
Charge the battery fully for at least 30 minutes or longer before using the product
for the first time. The product may not turn on before the battery is charged.
1. Import Notices…
!!
Be careful when using the battery. If batteries not provided by the manufacturer are
used, there is a risk of product failure or explosion. Also, keep the battery away to
prevent children or pets from biting or sucking the battery. Be careful to prevent
metal objects from contacting the charging terminals of the battery as it may cause
fire.
Turn off the power of the product in places where use of the product is prohibited.
Especially, the power should be turned off without fail in places where radio wave
problem may occur such as in an airplane or in a hospital. Electromagnetic wave
generated by the product not harmful to a human body may cause problems for
electronic flight equipment or medical instruments.
Do not paint a color or attach stickers with metal ingredient on the product. It may
cause buttons not to operate or a problem for receipt or transmission of radio wave.
Do not shoot the bar code laser of the bar code reader to eyes of a person or an
animal. In the extreme case, it may cause blindness.
Excessive exposure to sound at high volumes can cause hearing damage. Always
turn the volume down before plugging the earphones into an audio source and use
only the minimum volume setting necessary to hear your conversation or music.
2. Before Using
2.1 Package Components
…………………………………………………………………
Basic Components
Tow Standard Battery Adapter
Body
Earphone
USB cable
Manual
LCD film
CD
Cradle
Additional Components
Cigar Jack
Snap-on
Vehicle Mount
Leather Case
Tip
The specification and components of this product may change
according to the situation of the manufacturer.
2. Before Using…
2.2 Product Description
……………………………………………………………….
Name of Each Part
Name
Description
① LCD
Touch screen on which information is displayed
② Receiver
Part used as receiver where sound is output during telephone conversation
③ Button
Buttons used to enter phone numbers, or start or terminate the call
④ Barcode Reader
Part where laser is output for bar code scanning
⑤ Camera & Flash
Camera and flash used to take pictures
⑥ Battery switch
Switch used to mount or remove the battery
⑦ Battery
Standard or large capacity battery
⑧ Barcode Scanner Button
Button used for bar code recognition
⑨ Earphone
Hole into which the earphone is inserted
⑩ Volume Increase/Decrease Button
Button used to increase / decrease the volume of telephone conversation
⑪ Strap
Part to tight user’s hand with the device
⑫ Speaker
Part of the sound output
⑬ Sleep Button
Button used to turn on and off the LCD with the power on
⑭ Battery Charging Sign
Part to show the state of battery while the battery is charged
⑮ Mike
Part used as speaker where sound is input during telephone communication.
2. Before Using…
2.2 Product Description
……………………………………………………………….
Explanation about Button Function
Button
Function
These are used basically to enter numbers
and can also be used to enter letters.
The button is used to convert the function of
key to English letter or symbol key.
This button is used to delete one letter when
entering letters.
It is used to connect to the latest call and to
receive an incoming call during execution of
phone program.
It is used fully to end a call.
It moves the cursor to four directions, up,
down, left and right.
It is used to turn on or off the and also used
as a sleep mode.
It is used when the bar code is read.
It can increase or reduce the volume of
phone conversation.
There are three functions; Leaving a space/
Executing/ Jumping a zone.
There are two functions; Entering Capital/
Selecting a zone.
It is used to reset programs. Time, date and
the value of resist are kept.
It is used to reset the product. But, time and
date should be reset.
2. Before Using…
2.2 Product Description
……………………………………………………………….
To Connect Power and Charge
Connect the charging gender into the
gender insertion hole at the bottom of
the terminal.
Connect the adaptor to the power connector
at the right side of the gender.
During charging, the LED at the right top of the
product lights in red color and, when charging is
completed, it changes to green.
Battery Charging and Duration
GSM/GPRS
WCDMA
Tip
The time required for battery
charging is the time calculated
using an exclusive charger and the
Continuous
7h50m@-70dBm
5h30m@-70dBm
charging time and duration differ
call time
according to charging status and
Continuous
environment in which the product
400h
400h
standby time
is used.
- Duration of the batter may differ according to service form of the communication provider,
environment in which the product is used and the period the battery is used.
- Battery will be consumed even when the product is not used. Especially, battery is a consumable part.
Purchase and use a new battery if one time duration after charging has been considerably reduced.
- While the warranty period for PDA is one year, that of the battery is six months.
Time required for
charging
2h25m
2h25m
2. Before Using…
2.3 To connect with a PC
……………………………………………………………….
To install Active Sync
Agree with the license of Microsoft
ActiveSync. Select ‘Agree’ and
press ‘Next’.
In order to connect (synchronize) PDA with a PC,
Microsoft program called ActiveSync is required.
For installation, execute ‘Install Program’ and
press ‘Next’. At this time the PDA and PC should
not be connected.
Enter ‘User Name’ and ‘Organization’ and
press ‘Next’.
Check the disk capacity which can be used
for installation and change the installation
location by pressing ‘Change’ or press
‘Next’ if you want to install it in the default
location.
2. Before Using…
2.3 To connect with a PC
……………………………………………………………….
To install Active Sync
Installation of ActiveSync will be
performed. It may take several
minutes depending on the
environment of the user PC. Wait for
a while.
We are fully prepared for installation of
ActiveSync. Execute installation by pressing
‘install’.
Now, connect the PDA with the PC
using the gender.
Installation of ActiveSync has been
completed. Finish installation by
pressing ‘Finish’.
2. Before Using…
2.3 To connect with a PC
……………………………………………………………….
To install Active Sync
10
‘Found New hardware’ starts after connecting. Driver will be executed
automatically in PC .
Installation of ActiveSync has been
completed and synchronization will
start.
Tip
Install Active Sync and driver as above when OS of the PC you
used is Windows 2000, Windows XP.
Execute Windows Mobile Device Center without installing Active
Sync and Driver when OS is Windows Vista or Windows 7.
The latest version of ActiveSync can be downloaded on Microsoft
homepage.
3. User Interface
3.1 About the Home Screen
……………………………………………………………….
Setting Locking Function
The screen will be shown like
the right picture after touching
Device Unlocked on standby
screen. Closing the function can
be closed by touch sliding.
The PIN number box is
displayed after touch sliding if
the PIN number is set.
Status Window
Pop-up menu is shown
when you touch the status
bar on the above screen.
User can see Expansion,
Sync, Sound, Battery and
Alarm on the Pop-up menu.
3. User Interface
3.1 About the Home Screen
……………………………………………………………….
Wireless Manager
Wireless Manager can
manage Bluetooth, Phone and
Wi-Fi on/off.
Efficient battery management
is possible by ending unused
functions
Clock & Alarms
Set date, time and alarm. The time is automatically set depending on the region setting and
also can be controlled arbitrarily.
3. User Interface
3.1 About the Home Screen
……………………………………………………………….
Messaging
Unread text message and
Email can be checked.
E-mail is needed to Setup
processing that makes email
interwork with user’s
account. It needs an account
address and a password.
The explanation of the
function of text message is
on the next page.
Tasks
Tasks is the function of
managing ongoing work or
task.
It supports the efficient
work process by
prioritizing the tasks.
3. User Interface
3.1 About the Home Screen
……………………………………………………………….
Calendar
It supports the function
to manage appointments,
anniversaries and schedule
according to date.
Alarm setting and writing
the relative information
are available
Searching the Internet
Input a word that you want to search for.
Start searching the Internet.
The device is needed to connect to Wireless LAN
to search the internet.
The basic searching engine is set to bing engine of
Microsoft.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Modify Date                     : 2013:10:02 16:47:07+09:00
Create Date                     : 2013:10:02 16:46:20+09:00
Metadata Date                   : 2013:10:02 16:47:07+09:00
Format                          : application/pdf
Document ID                     : uuid:7f47eaf9-c416-4736-8fa8-be7d221100d7
Instance ID                     : uuid:ad5c4815-a1f6-4b7e-9ec7-2d0d3b6a7e73
Producer                        : doPDF Ver 7.3 Build 387 (Windows XP Home Edition  (SP 3) - Version: 5.1.2600 (x86))
Page Count                      : 18

EXIF Metadata provided by EXIF.tools