D T Systems ULTRA2000RX Dog Collars User Manual manual 2

Download:
Mirror Download [FCC.gov]
Document ID	156257
Application ID	ZzdVAoJZ9vAxrkoI5IsEOQ==
Document Description	manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	143.39kB (1792385 bits)
Date Submitted	2001-06-25 00:00:00
Date Available	2001-07-10 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	Acrobat PDFWriter 3.0 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	manual-2.PDF
Document Creator	Microsoft Word
Document Author:	Jeongmin Kim

Ultrzi-e'“ Model and Function
Ultra-e 2030
Button Functions :
It I - “Nick“
# ][ — Vibration only
# Ill — Tone»“Bcep" only
# lV- Intensity chcl adjustment
(See page I l for instructions on how to change Ultm-e‘“ batteries)
T ransmittcr Collar/Receiver
Emma“! Amumu
| m 1 mm lndknlor
Ann-mm Adjtnltlhlr can“
‘Mrk' nun"-
. | t .u
‘rmmfuwp n-m‘. " “ "' “
lacuna» I « .~|
mm mm
‘ I nun-u.
Han-us Kc) Rina
lowh l'mlhrf
Nun" “Mull-I l'u Tum own"
Md hymn!“ M Mu-Hnrthrtnr
a: Immuu Cumml
n n mum Iluflnlhvr
Ultrzl—e'“ Model and Function
Ultra-e 2040
Button Functions :
# I — Vibration only
# II - Tone-“Beep" only
This Model is a “NON-SHOCKING" Collar System
(Sec page I l for insmlctions on how to change Ultra-cl“ batteries)
Transmitter Collar/Receiver
liullxrddfil hm...“
I H) Lulu Ind-mim-
Winwbk run...
VII-mlnn Bum-u
Tum-“Mp“ mum
l'oudl ‘l‘ugnner
h. IurnUV/Hl-F
mm» m»; Hung
(won “m.“
m k | nmunl lM “m r”; nmorr
A lmmiu ("Mimi
L”) 1 gm lndirulnr
rning the l'
Turning ON
To turn on the unit you can use either the key ring magnet or the magnet in the collar
clasp. Hold one ot’ the magnets directly up against the small letter (10 on the front ol‘
the Collart'Reeeiver. You will hear a long two—second beep immediately followed by
a series of quick beeps. (The number ol’ beeps indicates which intensity level the unit
is set on.)
Do not move the magnet until the long beep stops. You will see a small red light
flashing beside the letter (M). The unit is now on. (This flashing red light indicates that
the unit is ON and not that the battery is low.)
Turning OFF
[0 turn the unit off. you simply reverse the procedure. Hold one of the magnets
directly up against the small letter ($1) on the front of the collar/Receiver. You will
hear a long two—second beep immediately followed by a shorter beep. Do not move
the magnet until the long beep stops. The small red light is no longer flashing. The
unit is mm OFF.
Changing the Intensity Level
Once the unit is in ON modetthe small red light is flashing). you can change the
Intensity Level by pressing Button IV on the transmitter. The ("ollarx‘Reeeiver unit
will emit a series ot‘ quick beeps to indicate the level. For instance it. the unit is on
level 3 you will hear 3 beeps. it’lhe unit is on level 8 you will hear X beeps. There are
eight levels. Al'ler level Eight the unit WI” cycle back to level One.
Introducing Your Dog to the Collar
Olntrodueing your dog to the collar should be a very positive experience. Like
anything new a dog must get used to the different feel of the collar.
0 We recommend when first introducing the collar that you don't even ttirn it on and
leave the transmitter in the box. The first day. keep your walking collar on the dog
and hook up a leash. Put your new Ultra-e” collar on the dog and go for a walk.
Most dogs like to go fora walk on the leash. let your dog get used to the feel oflhe
new collar. Remember the unit is not active. Praise the dog as you walk. Pct them
with your hand and make the collar wearing experience positive.
OThe second day. again put the collar on your dog in the off position and play fetch
in your back yard. Do all the normal things you do with your dog during playtime.
Introduce some training commands without following through if the dog disobeys.
Keep this collar experience positive.
OThe third day. put your dog on a leash again. Put the activated Ultra-em collar
on the dog. This time brings the transmitter. Practice your training commands this
time introducing the lowest possible stimulation level to the dog to correct the
behavior. Every dog has a different tolerance level to stimulation. Watch for signs
that your dog feels the stimulation. Some signs are slight ear, head or tail
movements. Increase the levels gradually until the dog responds consistently to the
command.
Note 2 Even at low levels. dogs may yelp when stimulation is introduced because it
surprises them or it startles them and not because it is hurting them. Do not make the
mistake of rushing up and petting the dog and hugging the dog because you think that
you hurt them. If you do this the dog will learn that every time they feel the tingle
they just have to yelp and the tingle will stop and you will hug and pet them. At low
levels the dog feels a tickle. This tickle is the negative response that the dog will
associate with needing to make the correction. Low level stimulation is a more
effective way to train a dog. Low level stimulation is less painful than tugging on a
choke chain or leash. swatting a dog with a newspaper. spanking with your hand or
yelling at a dog. When done properly. low level stimulation training is more humane.
effective and mentally, a better way to train your dog. For more information on how
to train with electronic collars consult a professional trainer or buy a ‘how to train”
video or book on this subject from your local pet or sporting goods retailer.
IMPORTANT NOTICE :
Never attach a leash or tie-out lo the electronic training collar. This cart cause
excessive rubbing of the electrodes on the dog‘s neck which could create chafing.
rash. hair loss or even sores on the dog's neck. To help prevent neck chafing. your
collar should he snug on the dog’s neck with the electrodes making good skin
contract. lf your collar is too tight you can affect the breathing of the dog. If your
collar is too loose this will promote chafing. Always remove the collar after each
training session. The collar should not be worn for more than twelve continuous
hours without removing or repositioning on the dog's neck. Always remove your
collar and let the dog's neck rest. Some dogs have sensitive skin. Should signs of
irritation, redness. sores or chafing appear on the skin, remove collar and do not use
until the skin had completely cleared up.
Adjusting and Po our Collar for Proper Fit
Proper collar tightness and position are very important to insure safety and correct
functioning every time you use the collar.
CAI] electronic collars need to be very snug to work properly. They must be just
tight enough to allow the “prongs" or electrodes to make good skin contact.
0 If your collar is too loose, the stimulation may not work properly because good
skin contact is not being achieved. This can directly affect the stimulation
performance whether or not the dog will receive the stimulation. Always check for
good "prong" contact if it appears that your dog is not responding to the
stimulation
0 A loose collar can promote skin irritation from moving or rubbing too much on a
dog's neck while they are running or training. The proper snug lit will help prevent
this from occurring.
0 Proper fit of the collar is important. It should he just tight enough on the dog's neck
to make good skin contact and allow the dog to breath normally. The collar should
never be so light on the dog's neck that it restricts the dog's normal breathing
pattern.
0 For proper positioning ot‘ our collar receiver box. it should be placed on the center
of the dog's neck.(see picture below)
0 For how to adjust the collar strap see picture below.
To adjust the tightness & position of the collar
Proper collar tightness is extremely important.
it" the collar is too loose. the collar will not function
properly. and if the collar is too tight. the dog will have
difficulty in breathing.
To choose correct electrodes
i i a e
The proper length of the electrodes you should use is determined by which set is longy
enough to make good contact with the dog's skirt. Good contact is essential for the
proper operation of the unit.
CAUTION
When screwing in the electrodes. tighten by hand only.
Hunt] tightening will ttllow the electrodes to vibrate for maximum stimulation. Donut use it wrench.
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 5
Creator                         : Microsoft Word
Create Date                     : 2001³â 6¿ù 5ÀÏ Tuesday 4:15:57 ¿ÀÈÄ
Title                           : manual-2.PDF
Author                          : Jeongmin Kim
Producer                        : Acrobat PDFWriter 3.0 for Windows
Subject                         : 

EXIF Metadata provided by EXIF.tools