DAEWOO Lucoms CMC531X 15" Color Monitor User Manual lucoms531X 3 29983 4

DAEWOO Lucoms Co., Ltd 15" Color Monitor lucoms531X 3 29983 4

User Manual

Model No : 531XCOLOR MONITORUSER’S GUIDE
1. Read all of these instructions.2. Save these instructions for later use.3. Unplug this monitor from thewall outlet before cleaning. Do notuse liquid cleaners or aerosolcleaners. Use a damp cloth forcleaning.4. Do not use attachments not recommended bythe monitor manufacturer as they may causehazards.5. Do not use this monitor near water, e.g., near abathtub, washbowl, kitchen sink, or laundry tub,in a wet basement, or near a swimming pool, etc. 6. Do not place this monitor on anunstable cart, stand, or table. Themonitor may fall, causing seriousinjury to a child or adult, andserious damage to the appliance. 7. Slots and openings in thecabinet and the back or bottom areprovided for ventilation, to ensurereliable operation of the monitor,and to protect it from overheating.These openings must not be blocked or covered.The openings should never be blocked byplacing the monitor on a bed, sofa, rug, or othersimilar surface. This monitor should never beplaced near or over a radiator or heat register.This monitor should not be placed in a built-ininstallation such as a bookcase unless properventilation is provided.8. This monitor should be operatedonly from the type of power sourceindicated on the marking label. Ifyou are not sure of the powersupplied to your home, consultyour monitor dealer or local power company.9. This monitor is equipped with a3-wire grounding-type plug, Thatis, a plug having a third(grounding) pin. This plug willonly fit into a grounding-typepower outlet. This is a safety feature. If you areunable to insert the plug into the outlet, contactyour electrician to replace your obsolete outlet.Do not defeat the purpose of the grounding-typeplug.10. Do not allow anything to reston the power cord. Do not locatethis monitor where the cord will beabused by people walking on it. 11. Follow all warnings and instructions markedon the monitor.IMPORTANT SAFEGUARDS12. For added protection for thismonitor during a lightning storm,or when it is left unattended andunused for long periods of time,unplug it from the wall outlet. Thiswill prevent damage to the monitor and/or thecomputer due to lightning and power line surges. 13. Do not overload wall outlets and extensioncords as this can result in fire or electric shock. 14. Never push objects of any kind into thismonitor through cabinet slots, as they may touchdangerous voltage points or short out parts thatcould result in a fire or electric shock. Never spillliquid of any kind on the monitor. 15. Do not attempt to service thismonitor yourself, as opening orremoving covers may expose youto dangerous voltages or otherhazards. Refer all servicing toqualified service personnel. 16. Unplug this monitor from the wall outlet andrefer servicing to qualified service personnelunder the following conditions: a. When the power cord or plug is damaged orfrayed.b. If liquid has been spilled into the monitor. c. If the monitor has been exposed to rain orwater.d. If the monitor does not operate normally byfollowing the operating instructions. Adjust onlythose controls that are covered by the operatinginstructions, as improper adjustment of othercontrols may result in damage and will oftenrequire extensive work by a qualified technicianto restore normal operation. e. If the monitor has been dropped or the cabinethas been damaged. f. When the monitor exhibits a distinct change inperformance, this indicates a need for service. 17. When replacement parts arerequired be sure the servicetechnician has used replacementparts specified by the manufacturerthat have the same characteristics asthe original part. Unauthorized substitutionsmay result in fire, electric shock, or otherhazards.18. Upon completion of any service or repairs tothis monitor, ask the service technician toperform routine safety checks to determine thatthe monitor is safe to operate. FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENTNOTE :This equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses andcan radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures :- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that towhich the receiver is connected. - Consult the dealer or an experienced radio or TV technician for help. CAUTION : Any changes or modifications not expressly approved by theparty responsible for compliance could void the user’s authorityto operate the equipment. CANADIAN NOTICEAVIS CANADIENThis Class B digital apparatus meets all requirements of the CanadianInterference-Causing Equipment Regulations.Cet appareil numérique de la Class B respecte toutes les exigences duRèglement sur le matériel brouilleur du Canada.
Bitte lesen Sie alle diese Informationen, bevor Sie das Gerät in Betriebnehmen! Lesen Sie sich außerdem die Bedienungsanleitung komplett undsorgfältig durch, da nur in diesem Fall eine problemlose Inbetriebnahmeerwartet werden kann. •Achten Sie darauf, daß das Gerät nur in eine 230V Schuko-Steckdoseeingesteckt wird. •Die Steckdose sollte jederzeit frei zugänglich sein um bei einem evtl.auftretenden Notfall das Gerät schnell vom Netz zu trennen. •Achten Sie desweiteren darauf, daß die Netzanschlußleitung nichtmechanisch beansprucht oder sonstwie beschädigt wird. •Offnen Sie das Gerät niemals! Im Inneren befinden sich Teile mitgefährlicher Spannung. •Bevor Sie das Gerät reinigen, ziehen Sie bitte den Netzstecker aus derSteckdose. Säubern Sie dann das Gerät mit einem feuchten (keinesfallstropfnassen) Lappen. •Die in diesem Gerät entstehende Röntgenstrahlung ist ausreichendabgeschirmt (Ortsdosisleistung in 0.1m Abstand weniger als 1.0µ Sv/h).Beschleunigungsspannung maximal 26kV. •Stellen Sie das Gerät an einem ergonomisch günstigen Ort auf undsorgen Sie dafür, daß der Monitor mit nach ISO 9241 -3, -7, -8geprüfter Peripherie betrieben wird, da nur unter diesen Umständen einoptimaler ergonomischer Betrieb des Gerätes sichergestellt ist. Falls Sie dennoch Fragen haben, auf die die Bedienungsanleitung keinehinreichende Antwort geben kann, so kontaktieren Sie bitte den nächstenFachhändler.Maschinenlärminformationsverordnung 3. GSGV, 18.01 1991:Der arbeitsplatzbezogene Schalldruckpegel beträgt 70 dB (A) oderwenigergemäß ISO 7779. WICHTIGE INFORMATIONENEmission Characteristics Tested by SEMKOA sample of this type has been tested and has shown compliance with theguidelines in the swedish document MPR II.This product is also designed for IT power system with phase to phasevoltage of 230V. The power cord is used as a main disconnect device. Disconnect thepower cord before servicing. The outlet must be installed near the monitorand must be easily accessible.As an ENERGY STAR®Partner, Daewoo Lucoms Co., Ltd. hasdetermined that this product meets the Energy Star®guidelines for energyefficiency.The appliance is not intended for use by young children or infirm personswithout supervision ;Young children should be supervised to ensure that they do not play withthe appliance.European Union NoticeProducts with the CE Marking comply with both the EMC Directive(89/336/EEC) and the the Low Voltage Directive (73/23/EEC) issued by theCommission of the European Community.Compliance with these directives implies conformity to the followingEuropean Norms (in brackets are the equivalent international standards):•EN55022 (CISPR 22) - Electromagnetic Interference•EN55024 - Immunity Test for ITE Product•EN60950 (IEC950) - Product Safety•EN61000-3-2 (IEC555-2) - Power Line Harmonics
This manual explains how to correctly install, operate, and getthe best performance from your monitor. Please read this user’sguide carefully before installing your monitor, then keep it nearyour monitor for quick reference. First, please check that the contents of the box corresponds withthe following checklist :•Color monitor •Power cord •User’s Guide •Tilt/swivel stand •Warranty Card (Optional)If any item is missing or damaged, please contact your dealer.Please keep the box and packing materials so that you mayproperly store or transport your monitor.English-1CONTENTS INTRODUCTIONIntroduction ............................................................................. 1Product Features ................................................................. 2Setup ......................................................................................... 3Installing the Tilt/Swivel Stand .......................................... 3Connecting the Signal Cable and Power Cord..................... 4Operation & Adjustment ...................................................... 5Specifications ........................................................................... 9Factory Preset Timings ........................................................... 9Troubleshooting ..................................................................... 10
INSTALLING THE TILT/SWIVEL STAND1. Ensure that the power is off to the monitor. 2. Set the monitor face down with the underside facing you.Please be careful not to scratch the monitor screen. 3. Align the hooks on the stand with the guide holes on thebottom chassis of the monitor. 4. Insert the hooks into the guide holes. 5. Slide the tilt/swivel stand toward the front of the monitor untilthe latch locks in position.6. Turn the monitor and the stand upright.English-3PRODUCT FEATURES•The convenient and user-friendly on-screen display allows foreasy and accurate adjustments of horizontal and vertical screensize and position, geometry, and screen color. •The monitor supports a safe working environment in strictcompliance with the MPR II standard for low emissions.•The monitor complies with the VESA Display Data Channel(DDC) specification for Plug and Play compatibility.Advanced microcircuitry makes setup and configuration fastand effortless. •The monitor features Advanced Color Controls for fine-tuningto meet your own personal tastes or application requirements.Use the on-screen controls to adjust the color temperature,RGB gain value for the best possible screen color and intensity. •Press the menu button and activate the Self-Diagnosis menu todetermine whether your monitor is functioning normally, notreceiving a signal or is receiving a signal that is out of scanningrange.•Activate the higher refresh rates of the monitor to stabilize thescreen and eliminate the annoying flicker that contributes toeye-strain and headaches.•The “borderless” full-screen display capability works under allgraphic modes and provides a larger viewing area thanconventional monitors, giving you a better picture with moreworkspace.•With the POWER LIGHT function added,you can enjoy thebright screen for movie or any other multimedia utilization.English - 2SETUPIf you want to remove the tilt/swivel stand on the monitor, pressthe latch and pull the tilt/swivel stand toward the back of themonitor. Lift the stand to separate.Latch
English-5OPERATION & ADJUSTMENTControl Panel•Increase the value of any selected function.•While the OSD screen is off, you can adjust the screenbrightness according to each situation.•Decrease the value of any selected function.•Turns the OSD window on and off.•Move curosr to the previous function on the OSDwindow.•Move curosr to the next function on the OSD window.CONNECTING THE SIGNAL CABLE ANDPOWER CORD1. Turn off the computer and monitor.2. Connect the 15 pin D-sub connector to the output port of thevideo card in your computer.3. Tighten the screws of the connector.4. Plug the power cord into the AC receptacle located on the backof the monitor. 5. Plug the other end of the power cord into the AC outlet.English - 4If your power cord is PC-to-Monitor type, plug the other endof the power cord into the AC receptacle in the computer.Signal CablePower Cord
English-7English - 6ICON CONTROL FUNCTIONOSD FunctionsAdjust the left and right margins for moreconvex or more concave margins.Adjust the trapezoid of the screen bymoving the lines inward or outward.PINCUSHIONTRAPEZOIDAdjust the parallelogram when the screenis leaning left or right.PARALLELOGRAMAdjust the side balance when the sides ofthe screen are bowed towards left or right.PIN BALANCEBRIGHTNESSPOWER LIGHTCONTRASTThe screen will be brightprogressively by 10%(PC/GAME/MOVIE Mode).If you carry out general PCworks such as document editionon the Movie mode, you mayshorten the life span of CRT.Thus, it is recommended to verifythe selected mode before use.Hot KeyWhen there is no OSD, if you pressthis CONTRAST button, you canadjust the contrast directly.When there is no OSD, if you pressthis BRIGHTNESS button, you canadjust the brightness directly.Choose different preset colortemperatures or set your own customizedcolor parameters.(5000K is user mode)COLOR TEMPAdjust the red gain.RED GAINAdjust the blue gain.BLUE GAINAdjust the green gain.GREEN GAINDegaussing keeps the monitor free fromunwanted magnetism that can result incolor impurity.DEGAUSSAdjust the vertical picture moirecancellation.V. MOIREAdjust the horizontal picture moirecancellation.H. MOIREReset the screen to the Factory PresetDisplay Settings.RESET
English-9English - 8CDT Size 15-inchDiagonal visible image area 14-inchDot Pitch 0.28 mmSynchronization Horizontal 30 - 54 KHzVertical 50 - 160 Hz Plug and Play VESA DDC CompatiblePower Saving EPA, VESA DPMS, Nutek CompliantPower Source 100-240 Vac, 50/60Hz (Free Voltage)Power Consumption 70 WDimension-W x H x D 360 x 377 x 389 mm(set with stand)Weight-unpacked 25.4/11.5(lbs/Kg)Operating Temperature 10 ~ 40°C /50 ~ 104°FSPECIFICATIONSSelf DiagnosisWhen the monitor doesn’t display, if you press any key, SelfDiagnosis screen is displayed. Self Diagnosis function checksif the status of the monitor is No Signal or Out of range.No Signal screen is displayed whenthe D-Sub signal connector is notconnected or the status of the monitoris on DPMS mode.Out of Range screen is displayedwhen the applied frequency is underor over normal range.Normal rangeH : 30 - 54 KHzV : 50 - 160 HzICON CONTROL FUNCTIONFACTORY PRESET TIMINGSMode H.Freq (KHz) V.Freq(Hz) RemarkVGA 640 X480 31.5 60 Non-interlacedVESA VGA 75 640 X480 37.5 75 Non-interlacedVGA 720 X400 31.5 70 Non-interlacedVESA SVGA 60 800 X600 37.9 60 Non-interlacedVESA 46K 800 X600 46.9 75 Non-interlacedVESA SVGA 85 800 X600 53.7 85 Non-interlacedVESA 48K 1024 X768 48.3 60 Non-interlacedResolution(dotsXlines)*This specification can be changed without any prior notice to improve thequality of the product.Adjust the width (horizontal size) of thedisplay.H. SIZE Adjust the position of the displayhorizontally (left or right) .H. CENTERAdjust the position of the displayvertically (up or down).V. CENTERAdjust the height (vertical size) of thedisplay.V. SIZE
English - 10TROUBLESHOOTINGCheck if power switch and computer power switchare in the on position.Check if the signal cable is correctly connected tothe video card. Check if the pins of D subconnector are not bent.Check if the computer is in the power- saving mode. Check if power switch is in the on position.Check if the power cord is correctly connected.Check if the signal cable is suitable to the video card.Adjust H&V Size or H&V Center to get the properimage.Keep the devices that may cause electrical interference away from the monitor. See the FCC information at the front cover of themanual.Operate Degauss once.Adjust Contrast and Brightness.Operate Degauss once.Adjust Geometry Control (Pincushion, Trapezoid..).SymptomNo picture.POWER LED is notlit.Image is unstable.Image is notcentered, too smallor too large.Picture bounces or a wave pattern ispresent in thepicture.Color looks blotchy.Picture is blurred.Edges of availablearea on the screenare not straight.Check

Navigation menu