DAEWOO Lucoms CML710M 17 " LCD Monitor User Manual LUCOMS L710 L710M 34902 EN

Download:
Mirror Download [FCC.gov]
Document ID	395608
Application ID	+s7OtufTpfpcPLyCeUS+qQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.62kB (495297 bits)
Date Submitted	2004-02-10 00:00:00
Date Available	2004-02-09 00:00:00
Creation Date	2003-09-25 11:03:10
Producing Software	Acrobat Distiller 3.01 for Power Macintosh
Document Lastmod	2004-02-05 15:48:23
Document Title	LUCOMS L710/L710M(34902)EN
Document Creator	QuarkXPress3.3K: LaserWriter 8 KH1-8.4.3
Document Author:	502

USER’S GUIDE
COLOR MONITOR
Model No :L710/L710M
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
NOTE : This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio or TV technician for help.
CAUTION : Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate the equipment.
CANADIAN NOTICE
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
AVIS CANADIEN
Cet appareil numérique de la Class B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
As an ENERGY STAR® Partner, Daewoo Lucoms Co., Ltd. has
determined that this product meets the Energy Star® guidelines for
energy efficiency.
CONTENTS
Introduction ............................................................................. 1
Product Features ................................................................. 2
Setup ......................................................................................... 3
INTRODUCTION
This manual explains how to correctly install, operate and get the
best performance from your monitor. Please read this user’s guide
carefully before installing your monitor, then keep it near your
monitor for quick reference.
Connecting the 15 Pin Signal Cable and Power Cord ..........3
Operation & Adjustment ...................................................... 4
First, please check that the contents of the box corresponds with the
following checklist :
Specifications ......................................................................... 11
Factory Preset Timings ......................................................... 12
Changing the Stand ............................................................... 13
Troubleshooting ..................................................................... 15
TFT LCD monitor
Power cord
15 pin signal cable
User’s guide
Audio cable(L710M only)
Warranty card (Optional)
If any item is missing or damaged, please contact your dealer. Please
keep the box and packing materials so that you may properly store or
transport your monitor.
English - 1
SETUP
PRODUCT FEATURES
CONNECTING THE 15 PIN SIGNAL CABLE AND POWER CORD
The monitor is designed for use in a small work area or for
those who need more work space on the desk.
The convenient and user-friendly on-screen display allows for
easy and accurate adjustments of screen size, position and
screen color.
The monitor supports a safe working environment in strict
compliance with the TCO 99 standard for low emissions .
The monitor complies with the VESA Display Data Channel
(DDC) specification for Plug and Play compatibility.
Advanced microcircuitry makes setup and configuration fast
and effortless.
! Plug the power cord into the AC receptacle located on the back of the
monitor.
@ Connect the 15 pin signal cable to the output port of the video card in
your computer and monitor.
# Connect the Audio cable to the sound card of computer(L710M only).
$ Headphone jack(L710M only).
The monitor features Advanced Color Controls for fine-tuning
to meet your own personal tastes or application requirements.
Use the on-screen controls to adjust the color temperature,
RGB gain value for the best possible screen color and
intensity.
Press the menu button and activate the Self-Diagnosis menu to
determine whether your monitor is functioning normally, not
receiving a signal or is receiving a signal that is out of
scanning range.
AC POWER
Power Cord
15 pin signal
cable
Activate the higher refresh rates of the monitor to stabilize the
screen and eliminate the annoying flicker that contributes to
eye-strain and headaches.
The monitor supports the optimal display performance with
1280x1024 at 75Hz.
With the POWER LIGHT function added,you can enjoy the
bright screen for movie or any other multimedia utilization.
This product has the stereo speaker(L710M only).
English - 2
English - 3
OPERATION & ADJUSTMENT
CONTROL PANEL
< L710M >
< L710 >
1 POWER
Shows both normal operation
and power management status
with power indicator light.
Swithes the monitor on and
off.
Shows both normal operation
and power management status
with power indicator light.
Swithes the monitor on and
off.
2 POWER Indicator
1 POWER
2 POWER Indicator
(*)
Moves cursor to the right or
low window in the OSD
window and increases the
value of any selected function.
5 POWER LIGHT
(*)
Moves cursor to the left or
high window in the OSD
window and decreases value
of any selected function.
6 SELECT
While the OSD screen is off,
you can adjust the screen
brightness according to each
situation.
Moves from top menu to sub
menu in the OSD window and
opens the function window for
the selected icon.
8 AUTO ( * )
7 MENU/EXIT
Turns the OSD window on.
Turns the OSD (On-Screen
Display) window off and moves
from sub menu to top menu in
the OSD window.
English - 4
Launches the AUTO
TRACKING function directly.
( * ) : Hot Key
(* )
Moves cursor to the right or
low window in the OSD
window and increases the
value of any selected function.
Moves cursor to the left or high
window in the OSD window and
decreases value of any selected
function.
While the OSD screen is off,
you can adjust the brightness
directly.
5 POWER LIGHT
/VOLUME( *)
While the OSD screen is off, you
can adjust the volume directly.
6 SELECT
While the OSD screen is off,
you can adjust the screen
brightness according to each
situation.
Moves from top menu to sub
menu in the OSD window and
opens the function window for
the selected icon.
8 AUTO ( * )
7 MENU/EXIT
Turns the OSD window on.
Turns the OSD (On-Screen
Display) window off and moves
from sub menu to top menu in
the OSD window.
English - 5
Launches the AUTO
TRACKING function directly.
( * ) : Hot Key
KEY PROCESS
ADJUSTMENT PROCEDURE
MENU
1280X1024
64K
U T L TY
60
OSD
No
Is the H.Size
proper?
U T L TY
Adjust the CLOCK control.
OSD
SELECT
SELECT
EXIT
EXIT
Yes
U T L TY
SH AR PN ESS
Is the
noise displayed on
the screen?
SH AR PN ESS
Perform the AUTO
POSITION.
No
EXIT
Yes
OSD OFF
Perform the AUTO
TRACKING.
HOT KEY
AUTO
Is the
noise displayed on
the screen yet?
POWER LIGHT
AU TO T R AC K I N G
POWER LIGHT
No
PC MODE
GAME MODE
When there is no OSD, if you press this
AUTO button, you can use the best display
performance fit for a current mode.
The screen will be brightened progressively
by 10%. If you carry out general PC works
such as document edition on the Movie
mode,you may shorten the life span of LCD
panel. Thus,it is recommended to verify the
selected mode before use.
BRIGHTNESS /
Yes
MOVIE MODE
Adjust the CLOCK FINE
until the screen is cleared.
Yes
Is the
noise displayed on
the screen yet?
No
End
When there is no OSD, if you press this
BRIGHTNESS button, you can adjust the
brightness directly.
: decreases brightness
: increases brightness
English - 6
English - 7
OSD FUNCTIONS
ICON
CONTROL
FUNCTION
ICON
CONTROL
FUNCTION
LANGUAGE
Select language for OSD (6 languages).
OSD
TIME OUT
Adjust the display OSD Menu.
CLOCK
Adjust the width (horizontal size) of the
screen image.
STATUS
Display horizontal & vertical frequency
and polarity.
RECALL
Reset the screen to the Factory Preset
Display Settings.
CLOCK FINE
Sharpen the focus by aligning the
illuminated pixels and adjust until the
screen image looks focused, crisp and
sharp. Adjusting the CLOCK FINE after
the CLOCK adjustment will produce a
clear screen.
AUTO
POSITION
Choose automatically the proper
horizontal position and vertical position &
size of the screen image.
CONTRAST
Adjust the contrast of image, the
difference between light and dark areas on
the screen.
Adjust the horizontal & vertical picture
image quality and size.
AUTO
TRACKING
Choose different preset color temperatures
COLOR
or set your own customized color
TEMPERATURE
parameters.
RED CONTROL Adjust the red color.
GREEN
CONTROL
Adjust the green color.
BLUE
CONTROL
Adjust the blue color.
H. CENTER &
Adjust the position of the display
horizontally (left or right) and vertically
(up or down).
V. CENTER
OSD
SHARPNESS
Adjust the display image quality (if the
screen proceed to scaling up).
OSD
POSITION
Adjust the OSD position horizontally (left
or right) and vertically (up or down).
English - 8
English - 9
SPECIFICATIONS
SELF DIAGNOSIS
Panel
If there is no image, the Self Diagnosis screen will be displayed.
Self Diagnosis function checks if the status of the monitor screen
is No Signal, Out of range or None support .
No Signal screen is displayed when the DSub signal connector is connected but the
status of the monitor is on DPMS mode.
Synchronization
Out of Range screen is displayed when the
applied frequency is under or over normal
range.
Normal range
(Non-interlaced mode only)
H : 30 - 80 KHz
V : 56 - 77 Hz
None support screen is displayed when the
applied frequency is under or over factory
preset timings.
Check cable screen is displayed when the
signal cable is disconnected.
Video Bandwidth
Max Resolution
Colors
Display Area
PC Input Signal
Speaker
Plug and Play
Power Source
Power Consumption
Dimension-W x H x D
Size
Pixel Pitch
Viewing Angle
Contrast Ratio
Brightness
Color Filter
Horizontal
Vertical
Sync
Video
Max. Output
Weight-net/gross
Power Saving
Tilt Range
Operating Temperature
17-inch (43.2 cm) diagonal
0.264 x 0.264 mm
60°(Right/Left)
45°(up), 45°(down)
400:1 contrast ratio (typ)
250cd/m2 brightness (typ)
RGB vertical stripe
30 - 80 KHz
56 - 77 Hz
135 MHz
1280 x 1024 a 75Hz
16M Colors
337.9mm x 270.3mm
H/V separate (TTL)
15 pin mini D-sub(Analog RGB)
2W(Left 1W+Right 1W)
VESA DDC Compatible
100-240 Vac, 50/60 Hz (Free Voltage)
35 W
386 x 398 x 190 mm (with stand)
386 x 346 x 60 mm (without stand)
6.2/7.6 Kg(13.6/16.7 lbs)
EPA, VESA DPMS, Nutek Compliant
5° forward, 30° backward
10 ~ 40°C /50 ~ 104°F
The specification can be changed without any prior notice to improve the
quality of the product.
The LCD panel may have some defective pixels (e.g. slightly light or
dark) due to a characteristic of the LCD panel. But there is no defect in
your LCD product itself.
English - 10
English - 11
FACTORY PRESET TIMINGS
CHANGING THE STAND
VESA MODES
VGA
Resolution
(dots X lines)
640 X 480 a 60Hz
VGA
Mode
Removing Original Stand
H.Freq (KHz) V.Freq (Hz)
Remark
31.5
60
Non-interlaced
640 X 480 a 72Hz
37.9
72
Non-interlaced
VGA
640 X 480 a 75Hz
37.5
75
Non-interlaced
SVGA
800 X 600 a 56Hz
800 X 600 a 60Hz
35.2
56
Non-interlaced
37.9
60
Non-interlaced
800 X 600 a 72Hz
800 X 600 a 75Hz
48.1
72
Non-interlaced
SVGA
46.9
75
Non-interlaced
XGA
1024 X 768 a 60Hz
48.4
60
Non-interlaced
XGA
1024 X 768 a 70Hz
1024 X 768 a 75Hz
1280 X 1024 a 60Hz
56.5
70
Non-interlaced
60.0
75
Non-interlaced
64.0
60
Non-interlaced
80.0
75
Non-interlaced
67.5
75
Non-interlaced
60.0
60
Non-interlaced
SVGA
SVGA
XGA
SXGA
SXGA
1280 X 1024 a 75Hz
1152 X 864 a 75Hz
SXGA
1280 X 960 a 60Hz
SXGA
IBM MODES
EGA
Resolution
(dots X lines)
640 X 350 a 70Hz
DOS
720 X 400 a 70Hz
Mode
VGA
SVGA
SXGA
Resolution
(dots X lines)
640 X 480 a 67Hz
832 X 624 a 75Hz
1152 X 870 a 75Hz
Place a cushion or a soft cloth on the floor and put the product on it with
the front of the monitor facing the floor.
H.Freq (KHz) V.Freq (Hz)
31.5
70
Non-interlaced
31.3
70
Non-interlaced
H.Freq (KHz) V.Freq (Hz)
Remark
MAC MODES
Mode
Turn off the monitor and pull out the power cable.
Remark
35.0
67
Non-interlaced
49.7
75
Non-interlaced
68.7
75
Non-interlaced
1. Detach the rear cover of the stand with a screwdriver.
2. Remove the four screws connecting the stand and the body and the
stand is disassembled.
THE OTHERS
Mode
SXGA
Resolution
(dots X lines)
1280 X 1024 a 70Hz
H.Freq (KHz) V.Freq (Hz)
74.4
70
Remark
Non-interlaced
The LCD Monitor has only Non-interlanced modes without flicker.
English - 12
English - 13
TROBLESHOOTING
Attaching the monitor with the arm-stand(option)
Symptom
Support
stand
Check
Picture is jitterd.
Adjust Clock to set the screen position and adjust
Clock fine until a noise isn’t displayed.
No picture.
Check if power switch and computer power switch
are in the on position.
Surface for
stand
installation
Check if the signal cable is correctly connected to
the video card.
Check if the pins of D subconnector are not bent.
Tighten up screws at the locations
indicated by arrows.
This monitor’s installation surface is compatible with various kinds
of VESA standard stands.
Hole spacing : 100x100 mm
Screw Length : 8~12 mm
Check if the computer is in the power- saving mode.
POWER LED is not Check if power switch is in the on position.
lit.
Check if the power cord is correctly connected.
Image is unstable.
Check if the signal cable is suitable to the video card.
Image is not
centered, too small
or too large.
Adjust Clock or H&V Center to get the proper
image.
Picture bounces or a Keep the devices that may cause electrical
wave pattern is
interference away from the monitor.
present in the
picture.
Picture is blurred.
English - 14
Adjust Contrast and Brightness.
English - 15
Symptom
No sound.
Check
Check the audio cable are correctly connected to the
computer.
Adjust the volume after checking the sound is muted.
Check the audio system in the computer.
Low sound.
Adjust the volume on the OSD Menu.
Adjust the volume of the sound card in the computer.
English - 16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2003:09:25 11:03:10Z
Modify Date                     : 2004:02:05 15:48:23+09:00
Page Count                      : 11
Has XFA                         : No
Creation Date                   : 2003:09:25 11:03:10Z
Producer                        : Acrobat Distiller 3.01 for Power Macintosh
Author                          : 502
Mod Date                        : 2004:02:05 15:48:23+09:00
Metadata Date                   : 2004:02:05 15:48:23+09:00
Creator                         : 502
Title                           : LUCOMS L710/L710M(34902)EN

EXIF Metadata provided by EXIF.tools