DAEWOO Lucoms CML750 17" LCD Monitor User Manual DWINT L710DM 1 34932

DAEWOO Lucoms Co., Ltd 17" LCD Monitor DWINT L710DM 1 34932

Users Manual

Download:
Mirror Download [FCC.gov]
Document ID	561948
Application ID	ReU/u9g7+vsA4AskcZt/OQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	146.12kB (1826455 bits)
Date Submitted	2005-07-14 00:00:00
Date Available	2005-07-14 00:00:00
Creation Date	2005-06-15 14:30:19
Producing Software	Acrobat Distiller 3.01 for Power Macintosh
Document Lastmod	2005-06-15 14:36:00
Document Title	DWINT-L710DM-1(34932)
Document Creator	01 XPress3.3k: LaserWriter 8.4.3 KH1-8.4.3
Document Author:	Â¿Ã€Â¿ÂµÃˆÃ±

USER’S GUIDE
GUIDE
USER’S
TFT-LCD MONIT OR
Model No : L950 / L750
IMPORTANT SAFEGUARDS
1. Read all of these instructions.
2. Save these instructions for later use.
3. Unplug this monitor from the
wall outlet before cleaning. Do not
use liquid cleaners or aerosol
cleaners. Use a damp cloth for
cleaning.
4. Do not use attachments not recommended by
the monitor manufacturer as they may cause
hazards.
5. Do not use this monitor near water, e.g., near a
bathtub, washbowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool, etc.
6. Do not place this monitor on an
unstable cart, stand, or table. The
monitor may fall, causing serious
injury to a child or adult, and
serious damage to the appliance.
7. Slots and openings in the
cabinet and the back or bottom are
provided for ventilation, to ensure
reliable operation of the monitor,
and to protect it from overheating.
These openings must not be blocked or covered.
The openings should never be blocked by
placing the monitor on a bed, sofa, rug, or other
similar surface. This monitor should never be
placed near or over a radiator or heat register.
This monitor should not be placed in a built-in
installation such as a bookcase unless proper
ventilation is provided.
8. This monitor should be operated
only from the type of power source
indicated on the marking label. If
you are not sure of the power
supplied to your home, consult
your monitor dealer or local power company.
9. This monitor is equipped with a
3-wire grounding-type plug, That
is, a plug having a third
(grounding) pin. This plug will
only fit into a grounding-type
power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact
your electrician to replace your obsolete outlet.
Do not defeat the purpose of the grounding-type
plug.
10. Do not allow anything to rest
on the power cord. Do not locate
this monitor where the cord will be
abused by people walking on it.
11. Follow all warnings and instructions marked
on the monitor.
12. For added protection for this
monitor during a lightning storm,
or when it is left unattended and
unused for long periods of time,
unplug it from the wall outlet. This
will prevent damage to the monitor and/or the
computer due to lightning and power line surges.
13. Do not overload wall outlets and extension
cords as this can result in fire or electric shock.
14. Never push objects of any kind into this
monitor through cabinet slots, as they may touch
dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill
liquid of any kind on the monitor.
15. Do not attempt to service this
monitor yourself, as opening or
removing covers may expose you
to dangerous voltages or other
hazards. Refer all servicing to
qualified service personnel.
16. Unplug this monitor from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
a. When the power cord or plug is damaged or
frayed.
b. If liquid has been spilled into the monitor.
c. If the monitor has been exposed to rain or
water.
d. If the monitor does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore normal operation.
e. If the monitor has been dropped or the cabinet
has been damaged.
f. When the monitor exhibits a distinct change in
performance, this indicates a need for service.
17. When replacement parts are
required be sure the service
technician has used replacement
parts specified by the manufacturer
that have the same characteristics as
the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
18. Upon completion of any service or repairs to
this monitor, ask the service technician to
perform routine safety checks to determine that
the monitor is safe to operate.
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
NOTE : This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio or TV technician for help.
CAUTION : Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
CANADIAN NOTICE
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
AVIS CANADIEN
Cet appareil numérique de la Class B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
European Union Notice
Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the
the Low Voltage Directive (73/23/EEC) issued by the Commission of the European
Community.
Compliance with these directives implies conformity to the following European Norms (in
brackets are the equivalent international standards):
• EN55022 (CISPR 22) - Electromagnetic Interference
• EN55024 - Immunity Test for ITE Product
• EN60950 (IEC950) - Product Safety
• EN61000-3-2 (IEC555-2) - Power Line Harmonics
As an ENERGY STAR® Partner, Daewoo Lucoms co., Ltd has determined that this
product meets the Energy Star® guidelines for energy efficiency.
The product is also designed for IT power system with phase to phase voltage of 230V.
IMPORTANT SAFEGUARDS
1. Read all of these instructions.
2. Save these instructions for later use.
3. Unplug this monitor from the
wall outlet before cleaning. Do not
use liquid cleaners or aerosol
cleaners. Use a damp cloth for
cleaning.
4. Do not use attachments not recommended by
the monitor manufacturer as they may cause
hazards.
5. Do not use this monitor near water, e.g., near a
bathtub, washbowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool, etc.
6. Do not place this monitor on an
unstable cart, stand, or table. The
monitor may fall, causing serious
injury to a child or adult, and
serious damage to the appliance.
7. Slots and openings in the
cabinet and the back or bottom are
provided for ventilation, to ensure
reliable operation of the monitor,
and to protect it from overheating.
These openings must not be blocked or covered.
The openings should never be blocked by
placing the monitor on a bed, sofa, rug, or other
similar surface. This monitor should never be
placed near or over a radiator or heat register.
This monitor should not be placed in a built-in
installation such as a bookcase unless proper
ventilation is provided.
8. This monitor should be operated
only from the type of power source
indicated on the marking label. If
you are not sure of the power
supplied to your home, consult
your monitor dealer or local power company.
9. This monitor is equipped with a
3-wire grounding-type plug, That
is, a plug having a third
(grounding) pin. This plug will
only fit into a grounding-type
power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact
your electrician to replace your obsolete outlet.
Do not defeat the purpose of the grounding-type
plug.
10. Do not allow anything to rest
on the power cord. Do not locate
this monitor where the cord will be
abused by people walking on it.
11. Follow all warnings and instructions marked
on the monitor.
12. For added protection for this
monitor during a lightning storm,
or when it is left unattended and
unused for long periods of time,
unplug it from the wall outlet. This
will prevent damage to the monitor and/or the
computer due to lightning and power line surges.
13. Do not overload wall outlets and extension
cords as this can result in fire or electric shock.
14. Never push objects of any kind into this
monitor through cabinet slots, as they may touch
dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill
liquid of any kind on the monitor.
15. Do not attempt to service this
monitor yourself, as opening or
removing covers may expose you
to dangerous voltages or other
hazards. Refer all servicing to
qualified service personnel.
16. Unplug this monitor from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
a. When the power cord or plug is damaged or
frayed.
b. If liquid has been spilled into the monitor.
c. If the monitor has been exposed to rain or
water.
d. If the monitor does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore normal operation.
e. If the monitor has been dropped or the cabinet
has been damaged.
f. When the monitor exhibits a distinct change in
performance, this indicates a need for service.
17. When replacement parts are
required be sure the service
technician has used replacement
parts specified by the manufacturer
that have the same characteristics as
the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
18. Upon completion of any service or repairs to
this monitor, ask the service technician to
perform routine safety checks to determine that
the monitor is safe to operate.
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
NOTE : This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio or TV technician for help.
CAUTION : Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
CANADIAN NOTICE
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
AVIS CANADIEN
Cet appareil numérique de la Class B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
European Union Notice
Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the
the Low Voltage Directive (73/23/EEC) issued by the Commission of the European
Community.
Compliance with these directives implies conformity to the following European Norms (in
brackets are the equivalent international standards):
• EN55022 (CISPR 22) - Electromagnetic Interference
• EN55024 - Immunity Test for ITE Product
• EN60950 (IEC950) - Product Safety
• EN61000-3-2 (IEC555-2) - Power Line Harmonics
As an ENERGY STAR® Partner, Daewoo Lucoms co., Ltd has determined that this
product meets the Energy Star® guidelines for energy efficiency.
The product is also designed for IT power system with phase to phase voltage of 230V.
CONTENTS
Introduction ............................................................................. 1
Product Features ................................................................. 2
Setup ......................................................................................... 3
Connecting the 15 Pin Signal Cable and Power Cord ......... 3
Operation & Adjustment ...................................................... 4
Specifications ..........................................................................11
INTRODUCTION
This manual explains how to correctly install, operate and get the
best performance from your monitor. Please read this user’s
guide carefully before installing your monitor, then keep it near
your monitor for quick reference.
First, please check that the contents of the box corresponds with
the following checklist :
• TFT LCD monitor
Factory Preset Timings ..........................................................12
• Power cord
Changing the Stand ................................................................13
• 15 pin signal cable
Troubleshooting ..................................................................... 15
• Audio cable(mini-jack)
• User’s guide
• Warranty card(optional)
• DVI cable(optional)
If any item is missing or damaged, please contact your dealer.
Please keep the box and packing materials so that you may
properly store or transport your monitor.
English - 1
CONTENTS
Introduction ............................................................................. 1
Product Features ................................................................. 2
Setup ......................................................................................... 3
Connecting the 15 Pin Signal Cable and Power Cord ......... 3
Operation & Adjustment ...................................................... 4
Specifications ..........................................................................11
INTRODUCTION
This manual explains how to correctly install, operate and get the
best performance from your monitor. Please read this user’s
guide carefully before installing your monitor, then keep it near
your monitor for quick reference.
First, please check that the contents of the box corresponds with
the following checklist :
• TFT LCD monitor
Factory Preset Timings ..........................................................12
• Power cord
Changing the Stand ................................................................13
• 15 pin signal cable
Troubleshooting ..................................................................... 15
• Audio cable(mini-jack)
• User’s guide
• Warranty card(optional)
• DVI cable(optional)
If any item is missing or damaged, please contact your dealer.
Please keep the box and packing materials so that you may
properly store or transport your monitor.
English - 1
SETUP
PRODUCT FEATURES
CONNECTING THE 15 PIN SIGNAL CABLE AND POWER CORD
The monitor is designed for use in a small work area or for
those who need more work space on the desk.
The convenient and user-friendly on-screen display allows for
easy and accurate adjustments of screen size, position and
screen color.
The monitor complies with the VESA Display Data Channel
(DDC) specification for Plug and Play compatibility.
Advanced microcircuitry makes setup and configuration fast
and effortless.
The monitor features Advanced Color Controls for fine-tuning
to meet your own personal tastes or application requirements.
Use the on-screen controls to adjust the color temperature,
RGB gain value for the best possible screen color and intensity.
! Plug the power cord into the AC receptacle located on the back of the
monitor.
@ Connect to the DVI port of the video card in your computer.(DVI
cable is optional)
# Connect the 15 pin signal cable to the output port of the video card in
your computer.
$ Connect the Audio cable to the sound card of computer.
% Headphone jack.
DVI
AC POWER
Press the menu button and activate the Self-Diagnosis menu to
determine whether your monitor is functioning normally, not
receiving a signal or is receiving a signal that is out of scanning
range.
Activate the higher refresh rates of the monitor to stabilize the
screen and eliminate the annoying flicker that contributes to
eye-strain and headaches.
Power Cord
15 pin signal
cable
DVI cable
The monitor supports the optimal display performance with
1280x1024 at 75Hz.
The internal stereo speakers make the end user enjoy audio
sound.
With the POWER LIGHT function added,you can enjoy the
bright screen for movie or any other multimedia utilization.
The monitor features VESA Analog signal cable and DVI
digial video cable functions.(Digital Visual Interface-Digital)
English - 2
English - 3
SETUP
CONNECTING THE 15 PIN SIGNAL CABLE AND POWER CORD
! Plug the power cord into the AC receptacle located on the back of the
monitor.
@ Connect to the DVI port of the video card in your computer.(DVI
cable is optional)
# Connect the 15 pin signal cable to the output port of the video card in
your computer.
$ Connect the Audio cable to the sound card of computer.
% Headphone jack.
DVI
Power Cord
DVI cable
English - 3
15 pin signal
cable
OPERATION & ADJUSTMENT
CONTROL PANEL
2 POWER Indicator
shows both normal operation and
power management status with
power indicator light.
1 POWER
switches the monitor on and off.
(* )
Moves cursor to the right or low window
in the OSD window and increases the
value of any selected function.
BRIGHTNESS ( * )
While the OSD screen is off, you can
adjust the brightness directly.
5 POWER LIGHT ( * )
While the OSD screen is off, you
can adjust the screen brightness
according to each situation.
/VOLUME ( * )
Moves cursor to the left or high
window in the OSD window and
decreases value of any selected
function.
VOLUME ( * )
While the OSD screen is off, you can
adjust the volume directly.
6 SOURCE/SELECT ( * )
Moves from top menu to sub menu in
the OSD window and opens the
function window for the selected icon.
SOURCE
7 MENU/EXIT
Turns the OSD window on.
While the OSD screen is off, you
can select the input signal
(Analog/Digital input signal).
EXIT
Turns the OSD(On-Screen Display)
window off and moves from sub menu
to top menu in the OSD window.
8 AUTO ( * )
English - 4
Launches the AUTO
TRACKING function directly
(Analog mode only ).
OPERATION & ADJUSTMENT
CONTROL PANEL
KEY PROCESS
1 POWER
switches the monitor on and off.
2 POWER Indicator
shows both normal operation and
power management status with
power indicator light.
MENU
1280 x 1024
OSD
Contrast
Picture
Brightness 100 -
Function
Color Temp. 9300
OSD Menu
Color Adjust
Sound
(* )
Moves cursor to the right or low window
in the OSD window and increases the
value of any selected function.
BRIGHTNESS ( * )
While the OSD screen is off, you can
adjust the brightness directly.
5 POWER LIGHT ( * )
While the OSD screen is off, you
can adjust the screen brightness
according to each situation.
1280 x 1024
6500
User
Contrast
Picture
Brightness 100 -
Function
Color Temp. 9300
OSD OSD Menu
Sound
EXIT
VOLUME ( * )
While the OSD screen is off, you can
adjust the volume directly.
6 SOURCE/SELECT ( * )
Moves from top menu to sub menu in
the OSD window and opens the
function window for the selected icon.
SOURCE
7 MENU/EXIT
Turns the OSD window on.
While the OSD screen is off, you
can select the input signal
(Analog/Digital input signal).
EXIT
Turns the OSD(On-Screen Display)
window off and moves from sub menu
to top menu in the OSD window.
8 AUTO ( * )
English - 4
1280 x 1024
6500
User
Launches the AUTO
TRACKING function directly
(Analog mode only ).
( * ) : Hot Key
English - 5
Contrast
Picture
Brightness 100 -
Function
Color Temp. 9300
OSD OSD Menu
EXIT
Misc.
Sound
75Hz
95 -
Color
SELECT
Color Adjust
Misc.
/VOLUME ( * )
Moves cursor to the left or high
window in the OSD window and
decreases value of any selected
function.
75Hz
95 -
Color
SELECT
EXIT
Misc.
75Hz
95 -
Color
Color Adjust
6500
User
HOT KEY
ADJUSTMENT PROCEDURE
AUTO
When there is no OSD, if you press this
AUTO button, you can use the best display
performance fit for a current mode.(Analog
mode only).
AU TO T R AC K I N G
Perform the AUTO
TRACKING
BRIGHTNESS
No
Is the H.Size proper?
1280 X 1024
OSD
75Hz
50 -
Color
Contrast
Picture
Brightness 100 -
Function
Color Temp.
OSD Menu
Color Adjust
9300
6550
User
When there is no OSD, if you press this
BRIGHTNESS button, you can adjust the
brightness directly.
Yes
: decreases brightness
Perform the AUTO
POSITION.
Is the noise displayed
on the screen?
: increases brightness
Misc.
Adjust the CLOCK control.
Sound
Yes
POWER LIGHT
1280 X 1024
OSD
Color
Signal Source
Picture
Power Light
Function
Reset
PC
Game
YES
OSD Menu
Misc.
75Hz
Movie
NO
The screen will be brightened progressively by
10%. If you carry out general PC works such
as document edition on the Movie mode,you
may shorten the life span of LCD panel.
Thus,it is recommended to verify the selected
mode before use.
No
Adjust the CLOCK FINE
until the screen is
cleared.
Is the noise displayed on
No
the screen yet?
Sound
End
Yes
VOLUME
When there is no OSD, you can adjust the
VOLUME directly.
English - 6
English - 7
HOT KEY
ADJUSTMENT PROCEDURE
AUTO
When there is no OSD, if you press this
AUTO button, you can use the best display
performance fit for a current mode.(Analog
mode only).
AU TO T R AC K I N G
Perform the AUTO
TRACKING
BRIGHTNESS
No
Is the H.Size proper?
1280 X 1024
OSD
75Hz
50 -
Color
Contrast
Picture
Brightness 100 -
Function
Color Temp.
OSD Menu
Color Adjust
9300
6550
User
When there is no OSD, if you press this
BRIGHTNESS button, you can adjust the
brightness directly.
Yes
: decreases brightness
Perform the AUTO
POSITION.
Is the noise displayed
on the screen?
: increases brightness
Misc.
Adjust the CLOCK control.
Sound
Yes
POWER LIGHT
1280 X 1024
OSD
Color
Signal Source
Picture
Power Light
Function
Reset
PC
Game
YES
OSD Menu
Misc.
75Hz
Movie
NO
The screen will be brightened progressively by
10%. If you carry out general PC works such
as document edition on the Movie mode,you
may shorten the life span of LCD panel.
Thus,it is recommended to verify the selected
mode before use.
No
Adjust the CLOCK FINE
until the screen is
cleared.
Is the noise displayed on
No
the screen yet?
Sound
End
Yes
VOLUME
When there is no OSD, you can adjust the
VOLUME directly.
English - 6
English - 7
OSD FUNCTIONS WITH USING PC
COLOR
OSD MENU
OSD
CONTRAST
Adjust the contrast of image, the difference between
light and dark areas on the screen.
LANGUAGE
Select language for OSD.
BRIGHTNESS
Adjust the brightness of image.
OSD H &V
POS.
Adjust the OSD position horizontally (left or right)
and vertically (up or down).
COLOR TEMP.
Choose different preset color temperatures or set your
own customized color parameters.
OSD TIMER
Adjust the display OSD Menu.
COLOR
ADJUST
Tranlucent
Adjust the OSD. Transparency
Adjust the color.
MISC.
PICTURE
(Analog mode only)
POWER LIGHT Select powerlight mode(PC/Game/Movie)
H. POSITION & Adjust the position of the display horizontally (left or
right) and vertically (up or down).
V. POSITION
PHASE
Remove any horizontal noise and clear or sharpen the
image of characters.
CLOCK
Adjust the width (horizontal size) of the screen
image.
FUNCTION
AUTO Adjust
(Analog mode only)
RESET
Reset the screen to the Factory Preset
Display Settings.
SOUND
SOUND
Turn the audio sound on or off.
VOLUME
Increase or decrease audio volume.
Choose automatically the proper horizontal position
and vertical position & size of the screen image.
English - 8
English - 9
OSD FUNCTIONS WITH USING PC
COLOR
OSD MENU
OSD
CONTRAST
Adjust the contrast of image, the difference between
light and dark areas on the screen.
LANGUAGE
Select language for OSD.
BRIGHTNESS
Adjust the brightness of image.
OSD H &V
POS.
Adjust the OSD position horizontally (left or right)
and vertically (up or down).
COLOR TEMP.
Choose different preset color temperatures or set your
own customized color parameters.
OSD TIMER
Adjust the display OSD Menu.
COLOR
ADJUST
Tranlucent
Adjust the OSD. Transparency
Adjust the color.
MISC.
(Analog mode only)
PICTURE
POWER LIGHT Select powerlight mode(PC/Game/Movie)
H. POSITION & Adjust the position of the display horizontally (left or
right) and vertically (up or down).
V. POSITION
PHASE
Remove any horizontal noise and clear or sharpen the
image of characters.
CLOCK
Adjust the width (horizontal size) of the screen
image.
FUNCTION
AUTO Adjust
(Analog mode only)
RESET
Reset the screen to the Factory Preset
Display Settings.
SOUND
SOUND
Turn the audio sound on or off.
VOLUME
Increase or decrease audio volume.
Choose automatically the proper horizontal position
and vertical position & size of the screen image.
English - 8
English - 9
SPECIFICATIONS
SELF DIAGNOSIS
Panel
If there is no image, the Self Diagnosis screen will be displayed.
Self Diagnosis function checks if the status of the monitor screen
is No Signal, Out of range or None support.
No Signal screen is displayed when the DSub signal connector is connected but the
status of the monitor is on DPMS mode.
Out of Range screen is displayed when the
applied frequency is under or over normal
range.
Normal range
(Non-interlaced mode only)
H : 30 - 80 KHz
V : 56 - 77 Hz
Synchronization
Video Bandwidth
Max Resolution
Optimal Resolution
Colors
Display Area
PC Input Signal
Audio
Check cable screen is displayed when the
signal cable is disconnected.
Size
Pixel Pitch
Viewing Angle
Contrast Ratio
Brightness
Color Filter
Horizontal
Vertical
Sync
Video
I/O
Speaker
Plug and Play
Power Source
Power Consumption
Dimension-W x H x D
Weight-net/gross
Power Saving
Tilt Range
Operating Temperature
17-inch(43.2 cm) diagonal
0.264 x 0.264 mm
70°(Right/Left)
60°(up/down)
450:1 contrast ratio(typ)
250cd/m2 brightness(typ)
RGB vertical stripe
30 - 80 KHz
56 - 77 Hz
140MHz
1280 x 1024@75Hz
1280 x 1024@60Hz
16M Colors
337.9 mm x 270.3 mm
H/V separate(TTL)
15 pin mini D-sub(Analog RGB)
DVI-D(Digital Visual Interface-Digital)
Stereo Mini Jack Input & Output
2W(Left 1W + Right 1W)
VESA DDC Compatible
100-240 Vac, 50/60 Hz(Free Voltage)
35W
386 x 398 x 190 mm(with stand)
386 x 346 x 60 mm(without stand)
5.3/ 7.0 Kg (11.7/15.4 Lbs)
EPA, VESA DPMS, Nutek Compliant
5° forward, 30° backward
10 ~ 40°C /50 ~ 104°F
The specification can be changed without any prior notice to improve the quality of the
product.
The LCD panel may have some defective pixels (e.g. slightly light or dark) due to a
characteristic of the LCD panel. But there is no defect in your LCD product itself.
English - 10
English - 11
SPECIFICATIONS

SELF DIAGNOSIS
Panel
If there is no image, the Self Diagnosis screen will be displayed.
Self Diagnosis function checks if the status of the monitor screen
is No Signal, Out of range or None support.
No Signal screen is displayed when the DSub signal connector is connected but the
status of the monitor is on DPMS mode.
Out of Range screen is displayed when the
applied frequency is under or over normal
range.
Normal range
(Non-interlaced mode only)
H : 30 - 80 KHz
V : 56 - 77 Hz
Synchronization
Video Bandwidth
Max Resolution
Optimal Resolution
Colors
Display Area
PC Input Signal
Audio
Check cable screen is displayed when the
signal cable is disconnected.
Size
Pixel Pitch
Viewing Angle
Contrast Ratio
Brightness
Color Filter
Horizontal
Vertical
Sync
Video
I/O
Speaker
Plug and Play
Power Source
Power Consumption
Dimension-W x H x D
Weight-net/gross
Power Saving
Tilt Range
Operating Temperature
19-inch diagonal
0.294 x 0.294 mm
70°(Right/Left)
60°(up/down)
700:1 contrast ratio(typ)
300cd/m2 brightness(typ)
RGB vertical stripe
30 - 80 KHz
56 - 77 Hz
140MHz
1280 x 1024@75Hz
1280 x 1024@60Hz
16M Colors
376.3 mm x 301 mm
H/V separate(TTL)
15 pin mini D-sub(Analog RGB)
DVI-D(Digital Visual Interface-Digital)
Stereo Mini Jack Input & Output
2W(Left 1W + Right 1W)
VESA DDC Compatible
100-240 Vac, 50/60 Hz(Free Voltage)
35W
386 x 398 x 190 mm(with stand)
386 x 346 x 60 mm(without stand)
5.4/ 7.0 Kg (11.9/15.4 Lbs)
EPA, VESA DPMS, Nutek Compliant
5° forward, 30° backward
10 ~ 40°C /50 ~ 104°F
The specification can be changed without any prior notice to improve the quality of the
product.
The LCD panel may have some defective pixels (e.g. slightly light or dark) due to a
characteristic of the LCD panel. But there is no defect in your LCD product itself.
English - 10
English - 12
FACTORY PRESET TIMINGS
CHANGING THE STAND
Removing Original Stand
VESA MODES
Mode
Resolution
(dots X lines)
H.Freq (KHz) V.Freq (Hz)
Remark
VGA
640 X 480@60Hz
31.5
60
Non-interlaced
VGA
640 X 480@72Hz
37.9
72
Non-interlaced
VGA
640 X 480@75Hz
37.5
75
Non-interlaced
SVGA
800 X 600@56Hz
35.2
56
Non-interlaced
SVGA
800 X 600@60Hz
37.9
60
Non-interlaced
SVGA
800 X 600@72Hz
48.1
72
Non-interlaced
SVGA
800 X 600@75Hz
46.9
75
Non-interlaced
XGA
1024 X 768@60Hz
48.4
60
Non-interlaced
XGA
1024 X 768@70Hz
56.5
70
Non-interlaced
XGA
1024 X 768@75Hz
60.0
75
Non-interlaced
SXGA
1280 X 1024@60Hz
64.0
60
Non-interlaced
SXGA
1280 X 1024@75Hz
80.0
75
Non-interlaced
SXGA
1152 X 864@75Hz
67.5
75
Non-interlaced
SXGA
1280 X 960@60Hz
60.0
60
Non-interlaced
IBM MODES
EGA
Resolution
(dots X lines)
640 X 350@70Hz
DOS
720 X 400@70Hz
Mode
H.Freq (KHz) V.Freq (Hz)
VGA
Resolution
(dots X lines)
640 X 480@67Hz
31.5
70
Non-interlaced
31.3
70
Non-interlaced
H.Freq (KHz) V.Freq (Hz)
Place a cushion or a soft cloth on the floor and put the product on it with
the front of the monitor facing the floor.
Remark
MAC MODES
Mode
Turn off the monitor and pull out the power cable.
Remark
35.0
67
Non-interlaced
SVGA
832 X 624@75Hz
49.7
75
Non-interlaced
SXGA
1152 X 870@75Hz
68.7
75
Non-interlaced
Mode
Resolution
(dots X lines)
1280 X 1024@70Hz
1. Detach the rear cover of the stand with a screwdriver.
2. Remove the four screws connecting the stand and the body and the
stand is disassembled.
THE OTHERS
SXGA
H.Freq (KHz) V.Freq (Hz)
74.4
70
Remark
Non-interlaced
The LCD Monitor has only Non-interlanced modes without flicker.
English - 13
English - 13
TROUBLESHOOTING
ATTACHING THE MONITOR WITH THE ARM-STAND(OPTION)
Symptom
Support
stand
Surface for
stand
installation
Check
Picture is jitterd.
Adjust Clock to set the screen position and adjust
Clock fine until a noise isn’t displayed.
No picture.
Check if power switch and computer power switch
are in the on position.
Check if the signal cable is correctly connected to
the video card.
Tighten up screws at the locations
indicated by arrows.
Check if the pins of D subconnector are not bent.
Check if the computer is in the power- saving mode.
This monitor’s installation surface is compatible with various kinds
of VESA standard stands.
Hole spacing : 100x100 mm
Screw Length : 8~12 mm
POWER LED is not Check if power switch is in the on position.
lit.
Check if the power cord is correctly connected.
Image is unstable.
Check if the signal cable is suitable to the video card.
Image is not
centered, too small
or too large.
Adjust Clock or H&V Center to get the proper
image.
Picture is blurred.
Adjust Contrast and Brightness.
No sound.
Check the audio cable are correctly connected to the
computer.
Adjust the volume after checking the sound is muted.
Check the audio system in the computer.
Low sound.
Adjust the volume on the OSD Menu.
Adjust the volume of the sound card in the computer.
English - 14
English - 14
S/N:9978641001

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 19
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:521a6536-bb3d-4741-82a9-0c97b796c611
Modify Date                     : 2005:06:15 14:36:00+09:00
Create Date                     : 2005:06:15 14:30:19+09:00
Metadata Date                   : 2005:06:15 14:36:00+09:00
Document ID                     : uuid:1fe6c247-85eb-404c-9f78-774de9de95ee
Format                          : application/pdf
Title                           : DWINT-L710DM-1(34932)
Creator                         : 01 XPress3.3k: LaserWriter 8.4.3 KH1-8.4.3
Author                          : ¿À¿µÈñ
Producer                        : Acrobat Distiller 3.01 for Power Macintosh

EXIF Metadata provided by EXIF.tools

DAEWOO Lucoms CML750 17" LCD Monitor User Manual DWINT L710DM 1 34932

DAEWOO Lucoms Co., Ltd 17" LCD Monitor DWINT L710DM 1 34932

Users Manual

FCC ID Filing: QZFCML750

Navigation menu

Namespaces

Views

Navigation