DAEWOO Lucoms L2200 LCD Monitor User Manual 9978641302

Download:
Mirror Download [FCC.gov]
Document ID	741899
Application ID	I2G95rw7giVmT2VhI4y1yQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	55.67kB (695825 bits)
Date Submitted	2006-12-22 00:00:00
Date Available	2006-12-22 00:00:00
Creation Date	2006-05-15 01:42:31
Producing Software	ezPDFGate with Acrobat Distiller
Document Lastmod	2006-12-14 20:30:15
Document Title	9978641302
Document Creator	QuarkXPress3.3: LaserWriter 8 KH-8.7.1
Document Author:	//

IMPORTANT SAFEGUARDS
1. Read all of these instructions.
2. Save these instructions for later use.
3. Unplug this monitor from the
wall outlet before cleaning. Do not
use liquid cleaners or aerosol
cleaners. Use a damp cloth for
cleaning.
4. Do not use attachments not recommended by
the monitor manufacturer as they may cause
hazards.
5. Do not use this monitor near water, e.g., near a
bathtub, washbowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool, etc.
6. Do not place this monitor on an
unstable cart, stand, or table. The
monitor may fall, causing serious
injury to a child or adult, and
serious damage to the appliance.
7. Slots and openings in the
cabinet and the back or bottom are
provided for ventilation, to ensure
reliable operation of the monitor,
and to protect it from overheating.
These openings must not be blocked or covered.
The openings should never be blocked by
placing the monitor on a bed, sofa, rug, or other
similar surface. This monitor should never be
placed near or over a radiator or heat register.
This monitor should not be placed in a built-in
installation such as a bookcase unless proper
ventilation is provided.
8. This monitor should be operated
only from the type of power source
indicated on the marking label. If
you are not sure of the power
supplied to your home, consult
your monitor dealer or local power company.
9. This monitor is equipped with a
3-wire grounding-type plug, That
is, a plug having a third
(grounding) pin. This plug will
only fit into a grounding-type
power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact
your electrician to replace your obsolete outlet.
Do not defeat the purpose of the grounding-type
plug.
10. Do not allow anything to rest
on the power cord. Do not locate
this monitor where the cord will be
abused by people walking on it.
11. Follow all warnings and instructions marked
on the monitor.
12. For added protection for this
monitor during a lightning storm,
or when it is left unattended and
unused for long periods of time,
unplug it from the wall outlet. This
will prevent damage to the monitor and/or the
computer due to lightning and power line surges.
13. Do not overload wall outlets and extension
cords as this can result in fire or electric shock.
14. Never push objects of any kind into this
monitor through cabinet slots, as they may touch
dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill
liquid of any kind on the monitor.
15. Do not attempt to service this
monitor yourself, as opening or
removing covers may expose you
to dangerous voltages or other
hazards. Refer all servicing to
qualified service personnel.
16. Unplug this monitor from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
a. When the power cord or plug is damaged or
frayed.
b. If liquid has been spilled into the monitor.
c. If the monitor has been exposed to rain or
water.
d. If the monitor does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore normal operation.
e. If the monitor has been dropped or the cabinet
has been damaged.
f. When the monitor exhibits a distinct change in
performance, this indicates a need for service.
17. When replacement parts are
required be sure the service
technician has used replacement
parts specified by the manufacturer
that have the same characteristics as
the original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
18. Upon completion of any service or repairs to
this monitor, ask the service technician to
perform routine safety checks to determine that
the monitor is safe to operate.
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
NOTE : This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio or TV technician for help.
CAUTION : Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
CANADIAN NOTICE
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
AVIS CANADIEN
Cet appareil numérique de la Class B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
European Union Notice
Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the
the Low Voltage Directive (73/23/EEC) issued by the Commission of the European
Community.
Compliance with these directives implies conformity to the following European Norms (in
brackets are the equivalent international standards):
• EN55022 (CISPR 22) - Electromagnetic Interference
• EN55024 - Immunity Test for ITE Product
• EN60950 (IEC950) - Product Safety
• EN61000-3-2 (IEC555-2) - Power Line Harmonics
As an ENERGY STAR®Partner, DAEWOO Lucoms Co., Ltd. has determined that
thisproduct meets the Energy Star®guidelines for energy efficiency.
WARNING: FOR CONTINUED SAFETY, REPLACE POWER ADAPTOR ONLY WITH
MANUFACTURER'S RECOMMENDED MODELS
CONTENTS
Introduction ............................................................................. 1
Product Features ................................................................. 2
Setup ......................................................................................... 3
Stand Assembling Procedures ............................................ 3
Connecting the 15 Pin Signal Cable and Power Cord ......... 4
Operation & Adjustment ....................................................... 5
Specifications ......................................................................... 12
Factory Preset Timings ......................................................... 13
Changing the Stand ............................................................... 14
Troubleshooting ..................................................................... 16
INTRODUCTION
This manual explains how to correctly install, operate and get the
best performance from your monitor. Please read this user’s
guide carefully before installing your monitor, then keep it near
your monitor for quick reference.
First, please check that the contents of the box corresponds with
the following checklist :
• TFT LCD monitor
• Power cord
• 15 pin signal cable
• User’s guide
• Audio Cable (Optional)
• DVI Cable (Optional)
If any item is missing or damaged, please contact your dealer.
Please keep the box and packing materials so that you may
properly store or transport your monitor.
English - 1
PRODUCT FEATURES
The monitor is designed for use in a small work area or for
those who need more work space on the desk.
The convenient and user-friendly on-screen display allows for
easy and accurate adjustments of screen size, position and
screen color.
The monitor complies with the VESA Display Data Channel
(DDC) specification for Plug and Play compatibility.
Advanced microcircuitry makes setup and configuration fast
and effortless.
The monitor features Advanced Color Controls for fine-tuning
to meet your own personal tastes or application requirements.
Use the on-screen controls to adjust the color temperature,
RGB gain value for the best possible screen color and intensity.
Press the menu button and activate the Self-Diagnosis menu to
determine whether your monitor is functioning normally, not
receiving a signal or is receiving a signal that is out of scanning
range.
Activate the higher refresh rates of the monitor to stabilize the
screen and eliminate the annoying flicker that contributes to
eye-strain and headaches.
The monitor supports the optimal display performance with
1680x1050 at 60Hz.
With the POWER LIGHT function added,you can enjoy the
bright screen for movie or any other multimedia utilization.
English - 2
SETUP
Stand Assembling Procedures
The monitor is packed with stand and main body separated.
Please join the stand with the main body before use.
1 Put some smooth pad or cloth on the
level surface and place the monitor
on it with the face downward.
Tighten the screw fully at the
bottom of the stand by turning it
clockwise three to four turns.
Join the stand with the metal
protrusion from the bottom of the
monitor’s main body.
※ l After fully tightening the screw, bend the
knob of the screw onto the bottom of the
stand.
Caution : Incomplete tightening of the
screw may cause the
monitor unstable.
l When disassembling the stand, please follow the procedure of assembling
in reverse order.
English - 3
CONNECTING THE 15 PIN SIGNAL CABLE AND POWER CORD
① Turn off the computer and monitor.
② Connect the 15 pin signal cable to the output port of the video card in
your computer and monitor.
③ Connect the DVI cable to the output port of the video card in your
computer and monitor. (Optional)
④ Connect the audio cable to the output port of the sound card in your
computer. (Optional)
⑤ Plug the DC jack into the DC in port located on the back of the monitor.
⑥ Plug the power cord into the AC receptacle of the Adapter.
⑦ Plug the other end of the power cord into the AC outlet.
OPTIONAL
DVI
15 pin Signal
Cable
Power Cord
Audio Cable
(Optional)
English - 4
DVI Cable
(Optional)
OPERATION & ADJUSTMENT
CONTROL PANEL
1 POWER Indicator
2 POWER
Shows both normal operation
and power management status
with power indicator light.
(*)
Moves cursor to the right or
low window in the OSD
window and increases the
value of any selected function.
While the OSD screen is off
- In case of the model where the
speaker is had built-in, you can
adjust the volume directly.
- In case of the model where the
speaker is not had built-in, you
can adjust the brightness directly
5 SELECT
Moves from top menu to sub
menu in the OSD window and
opens the function window for
the selected icon.
7 AUTO ( * )
Launches the AUTO
TRACKING function directly.
Switches the monitor on
and off.
(*)
Moves cursor to the left or high window in
the OSD window and decreases value of
any selected function.
While the OSD screen is off
- In case of the model where the
speaker is had built-in, you can
adjust the volume directly.
- In case of the model where the
speaker is not had built-in, you can
adjust the brightness directly
6 MENU
Turns the OSD window on.
Turns the OSD (On-Screen
Display) window off and moves
from sub menu to top menu in
the OSD window.
8 POWER LIGHT ( * )
While the OSD screen is off,
you can adjust the screen
brightness according to each
situation.
( * ) : Hot Key
English - 5
KEY PROCESS
COLOR
BRIGHTNESS
PICTURE
CONTRAST
FUNCTION
COLOR TEMP.
OSD MENU
LANGUAGE
SOUND
Sound icon will be displayed only
for Built in speaker model.
BRIGHTNESS
CONTRAST
COLOR TEMP.
English - 6
HOT KEY
When there is no OSD, if you press this
AUTO button, you can use the best display
performance fit for a current mode.
In case of the model where the speaker is had
built-in, you can adjust the volume directly
before use the OSD menu.
In case of the model where the speaker is not
had built-in, you can adjust the brightness
directly before use the OSD menu.
The screen will be brightened progressively by
10%. If you carry out general PC works such
as document edition on the Movie mode,you
may shorten the life span of LCD panel.
Thus,it is recommended to verify the selected
mode before use.
English - 7
ADJUSTMENT PROCEDURE
Perform the Auto
tracking
No
Is the H.SIZE proper?
Adjust the CLOCK control.
Yes
Perform the AUTO
POSITION.
Is the noise displayed on
the screen?
Yes
Adjust the CLOCK FINE
until the screen is
cleared.
Is the noise displayed on
the screen yet?
No
End
Yes
English - 8
OSD FUNCTIONS WITH USING PC
COLOR
BRIGHTNESS
Adjust the brightness of image.
CONTRAST
Adjust the contrast of image, the difference between
light and dark areas on the screen.
COLOR TEMP.
Choose different preset color temperatures or set your
own customized color parameters.
PICTURE
H. POSITION & Adjust the position of the display horizontally (left or
right) and vertically (up or down).
V. POSITION
CLOCK
Adjust the width (horizontal size) of the screen
image.
PHASE
Remove any horizontal noise and clear or sharpen the
image of characters.
FUNCTION
SIGNAL SOURCE Selects input signal in order.
DIGITL /ANALOG
AUTO ADJUST Choose automatically the proper horizontal position
and vertical position & size of the screen image.
POWER LIGHT Select powerlight mode(PC/Game/Movie)
RESET
Reset the screen to the Factory Preset Display
Settings.
INFORMATION
Display horizontally and vertically frequency of
monitor.
English - 9
OSD MENU
OSD H &
V POSITION
Adjust the OSD position horizontally (left or right)
and vertically (up or down).
OSD TIME
Adjust the display OSD Menu.
TRANSLUCENT
Adjust the OSD. Transparency
LANGUAGE
LANGUAGE
Select language for OSD
SOUND
MUTE
Turn the audio sound on or off.
VOLUME
Increase or decrease audio volume.
English - 10
SELF DIAGNOSIS
If there is no image, the Self Diagnosis screen will be displayed.
Self Diagnosis function checks if the status of the monitor screen
is No Signal, Out of range or None support.
No Signal screen is displayed when the DSub signal connector is connected but the
status of the monitor is on DPMS mode.
Out of Range screen is displayed when the
applied frequency is under or over normal
range.
Normal range
(Non-interlaced mode only)
H : 30 - 80 KHz
V : 56 - 77 Hz
Check cable screen is displayed when the
signal cable is disconnected.
English - 11
SPECIFICATIONS
<22 inch>
Panel
Synchronization
Video Bandwidth
Max Resolution
Optimal Resolution
Colors
Display Area
PC Input Signal
Size
Pixel Pitch
Viewing Angle
Contrast Ratio
Brightness
Response Time
Color Filter
Horizontal
Vertical
Sync
Video
Speaker
Max. Output
Plug and Play
Power Source
Power Consumption
Dimension-W x H x D
Weight-net/gross
Power Saving
Tilt Range
Operating Temperature
22-inch (55.88cm) diagonal
0.282(H)mm x 0.282(V)mm
160°(Right/Left)
160°(up) 60°(down)
1000:1 contrast ratio (typ)
300cd/m2 brightness (typ)
5msec
RGB vertical stripe
30 - 80 KHz
56 - 77 Hz
165 MHz
1680 x 1050@ 60Hz
1680 x 1050 @ 60Hz
16.7 M Colors
473.76(H)mm x 296.1(V)mm
H/V separate (TTL)
15 pin mini D-sub(Analog RGB)
DVI-D (Optional)
Left 3W + Right 3W
VESA DDC Compatible
DC 12V, 5A
40 W
523(W) x 405(H) x 156(D) mm
523(W) x 367(H) x 66(D) mm
6.5Kg / 8.7Kg (14.3 lbs/19.2 lbs)
EPA, VESA DPMS, Nutek Compliant
5° forward, 30° backward
10 ~ 40°C /50 ~ 104°F
The specification can be changed without any prior notice to improve the quality of the product.
The LCD panel may have some defective pixels (e.g. slightly light or dark) due to a
characteristic of the LCD panel. But there is no defect in your LCD product itself.
English - 12
FACTORY PRESET TIMINGS
VGA Mode
Resolution
H.Freq(KHz)
V.Freq(Hz)
Remark
640 X 480@60Hz
640 X 480@72Hz
31.5
37.9
60
72
Non-interlaced
Non-interlaced
640 X 480@75Hz
800 X 600@56Hz
800 X 600@60Hz
37.5
35.2
37.9
75
56
60
Non-interlaced
Non-interlaced
Non-interlaced
800 X 600@72Hz
800 X 600@75Hz
48.1
46.9
72
75
Non-interlaced
Non-interlaced
1024 X 768@60Hz
1024 X 768@70Hz
1024 X 768@75Hz
48.4
56.5
60.0
60
70
75
Non-interlaced
Non-interlaced
Non-interlaced
1280 X1024@60Hz
1280 X1024@75Hz
1152 X 864@75Hz
64.0
80.0
67.5
60
75
75
Non-interlaced
Non-interlaced
Non-interlaced
1280 X 960@60Hz
1440 x 900@60Hz
60.0
55.935
60
60
Non-interlaced
Non-interlaced
1680 x 1050@60H
65.290
60
Non-interlaced
IBM Mode
Resolution
640 X 350@70Hz
720 X 400@70Hz
H.Freq(KHz)
31.5
31.3
V.Freq(Hz)
70
70
Remark
Non-interlaced
Non-interlaced
Mac. Mode
Resolution
H.Freq(KHz)
V.Freq(Hz)
Remark
640 X 480@67Hz
35.0
67
Non-interlaced
832 X 624@75Hz
1152 X 870@60Hz
49.7
68.7
75
75
Non-interlaced
Non-interlaced
The Others
Resolution
H.Freq(KHz)
V.Freq(Hz)
1280 X1024@70Hz
74.4
70
Remark
Non-interlaced
The LCD Monitor has only Non-interlanced modes without flicker.
English - 13
CHANGING THE STAND
Removing Original Stand
Turn off the monitor and pull out the power cable.
Place a cushion or a soft cloth on the floor and put the product on it with
the front of the monitor facing the floor.
1. Detach the rear cover of the stand with a screwdriver.
2. Remove the four screws connecting the stand and the body and the
stand is disassembled.
English - 14
ATTACHING THE MONITOR WITH THE ARM-STAND(OPTION)
Support
stand
Surface for
stand
installation
Tighten up screws at the
locations indicated by arrows.
This monitor’s installation surface is compatible with various kinds
of VESA standard stands.
Hole spacing : 100x100 mm
Screw Length : 8~12 mm
English - 15
TROUBLESHOOTING
Symptom
Check
Picture is jitterd.
Adjust Clock to set the screen position and adjust
Clock fine until a noise isn’t displayed.
No picture.
Check if power switch and computer power switch
are in the on position.
Check if the signal cable is correctly connected to
the video card.
Check if the pins of D subconnector are not bent.
Check if the computer is in the power- saving mode.
POWER LED is not Check if power switch is in the on position.
lit.
Check if the power cord is correctly connected.
Image is unstable.
Check if the signal cable is suitable to the video card.
Image is not
centered, too small
or too large.
Adjust Clock or H&V Center to get the proper
image.
Picture bounces or a Keep the devices that may cause electrical
wave pattern is
interference away from the monitor.
present in the
See the FCC information at the front cover of the
picture.
manual.
Picture is blurred.
Adjust Contrast and Brightness.
English - 16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Count                      : 20
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:9d945a96-691d-4bf5-9075-5db54539e032
Producer                        : ezPDFGate with Acrobat Distiller
Create Date                     : 2006:05:15 01:42:31Z
Modify Date                     : 2006:12:14 20:30:15+09:00
Metadata Date                   : 2006:12:14 20:30:15+09:00
Creator Tool                    : QuarkXPress3.3: LaserWriter 8 KH-8.7.1
Document ID                     : uuid:8bf92419-c0f8-4276-9e94-61c3d559aa5c
Instance ID                     : uuid:085768f1-2c52-43e8-afa2-dc2b7edc68f5
Format                          : application/pdf
Creator                         : //
Title                           : 9978641302
Author                          : //

EXIF Metadata provided by EXIF.tools