DATECS INFINEAX7 Mobile Barcode Scanner with Bluetooth connectivity and Contactless reader User Manual UM
DATECS LTD. Mobile Barcode Scanner with Bluetooth connectivity and Contactless reader UM
DATECS >
UM
USER MANUAL for iPhone® 7 Infinea® X Infinea® X CONTACT INFORMATION Mobility Sales/ Technical Support Center Infinite Peripherals, Inc. 17681 Mitchell N. Irvine, CA 92614 Toll Free: (866) 278-7860 Office: (949) 222-0300 Fax: (949) 222-0375 Headquarters/ Main Warehouse Infinite Peripherals, Inc. 2312 Touhy Ave. Elk Grove Village, IL 60007 Toll Free: (800) 278-7860 Office: (847) 818-1260 Fax: (847) 818-1287 Email info@ipcmobile.com ipcmobile.com Note: iOS device and other items shown sold separately. Page 2 LEGAL NOTICE “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to the iPhone and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an iPhone may affect wireless performance. COMPATIBILITY Made for this mobile digital device: • iPhone® 7 TRADEMARK CREDITS Infinite Peripherals, Mobilize Your Enterprise, Linea Pro, Infinea, Infinea Tab and Infinea Omni are trademarks of Infinite Peripherals, Inc. All other trademarks are the property of their respective owners. Page 3 Contents LEGAL NOTICE������������������������������������������������������������������������������������������������������������������� 3 COMPATIBILITY������������������������������������������������������������������������������������������������������������������ 3 TRADEMARK CREDITS����������������������������������������������������������������������������������������������������� 3 BOX CONTENTS����������������������������������������������������������������������������������������������������������������� 6 Before Using Your Infinea X�������������������������������������������������������������������������������������������� 6 FEATURES��������������������������������������������������������������������������������������������������������������������������� 7 ACCESSORIES��������������������������������������������������������������������������������������������������������������������� 7 GETTING STARTED������������������������������������������������������������������������������������������������������������ 8 Warnings, Cautions and Notes��������������������������������������������������������������������������������������� 8 First Steps����������������������������������������������������������������������������������������������������������������������� 8 DEVELOPING APPLICATIONS FOR THE INFINEA X�������������������������������������������������� 9 PROGRAMMABLE OPTIONS������������������������������������������������������������������������������������������ 10 PRODUCT OVERVIEW������������������������������������������������������������������������������������������������������11 ASSEMBLING THE INFINEA X���������������������������������������������������������������������������������������� 15 iPhone Installation��������������������������������������������������������������������������������������������������������� 15 INSTALLING THE BATTERY PACK���������������������������������������������������������������������������������16 Standard and Extended Battery Installation����������������������������������������������������������������� 16 CHARGING THE INFINEA X�������������������������������������������������������������������������������������������� 17 Battery Status���������������������������������������������������������������������������������������������������������������� 17 Charging Using an Electrical Outlet������������������������������������������������������������������������������ 18 Charging the User Replaceable Battery������������������������������������������������������������������������ 19 Storage Instructions������������������������������������������������������������������������������������������������������ 19 Battery Disposal������������������������������������������������������������������������������������������������������������ 19 POWERING ON THE INFINEA X�����������������������������������������������������������������������������������20 Dual Purpose Scan Button�������������������������������������������������������������������������������������������� 20 Power On���������������������������������������������������������������������������������������������������������������������� 20 Barcode Scanning���������������������������������������������������������������������������������������������������������� 21 RFID������������������������������������������������������������������������������������������������������������������������������� 21 Page 4 STATUS AND OPERATIONAL MODES������������������������������������������������������������������������� 22 Programmable LED Status��������������������������������������������������������������������������������������������22 RESETTING YOUR INFINEA X��������������������������������������������������������������������������������������� 23 TROUBLESHOOTING������������������������������������������������������������������������������������������������������� 24 Troubleshooting > General������������������������������������������������������������������������������������������� 24 Troubleshooting > Scanner������������������������������������������������������������������������������������������� 24 Troubleshooting > RFID�������������������������������������������������������������������������������������������������25 CLEANING YOUR INFINEA X���������������������������������������������������������������������������������������� 26 Cleaning Precautions���������������������������������������������������������������������������������������������������� 26 TECHNICAL DATA ����������������������������������������������������������������������������������������������������������� 27 WARRANTY����������������������������������������������������������������������������������������������������������������������� 29 DISCLAIMER���������������������������������������������������������������������������������������������������������������������� 29 PRODUCT RETURNS AND SERVICING�����������������������������������������������������������������������30 SYMBOLS FOR USE���������������������������������������������������������������������������������������������������������� 31 Federal Communications Commission (FCC) Statement���������������������������������������� 32 15.21��������������������������������������������������������������������������������������������������������������������������������32 15.105(b)�������������������������������������������������������������������������������������������������������������������������32 Page 5 BOX CONTENTS Before Using Your Infinea X • • • • Remove the device and any included accessories from the shipping carton and verify contents against your packing list. Retain all packing materials, invoice, and bill of lading. These may be required to return the device for servicing later, or to process a claim with the shipping carrier. Carefully inspect the contents inside of the packaging for any signs of damage. If there are signs of damage, DO NOT attempt to use the unit. Notify your account executive or contact Infinite Peripherals technical support at support@ipcmobile.com. Ensure the battery is fully charged prior to initial use. Your Infinea X includes the items listed below: (1) Infinea X* (1) Charging Cup* (1) Quick Start Guide Also includes (1) Standard Battery (6) Flat Head Shoulder Socket Cap T6 Screws *Note: Box contents and part numbers may vary based on order configuration. Page 6 FEATURES The Infinea X allows you to scan barcodes into an iPhone. Before using the Infinea X, the battery should be fully charged. The following table will help you get your Infinea X ready for use. Feature Description Barcode Scanner The Infinea X supports one-dimensional (1D) and two dimensional (2D) barcode symbols, which can be read in any direction (omnidirectional). The effective reading distance of the barcode reader varies depending on the barcode size. The barcode scanner is capable of reading barcodes on a LCD screen. Radio Frequency Identification (RFID) The Infinea X has an RFID (Radio Frequency Identification) tag/card reader with read and write capability at 13.56 MHz. Battery User replaceable Li-ion battery. Indicators The Infinea X has three programmable indication features: audible, visual and haptic. An Internal electro-magnetic buzzer provides the audible indicator. For visual indications, there are 4 multi-color SDK programmable LEDs (blue, green, red and orange). These LEDs also provide battery status. The haptic indicator is a programmable vibration motor. Power Monitoring The Infinea X contains an on board fuel gauge that facilitates accurate monitoring of significant battery attributes using the SDK. Bluetooth Compatibility Available Bluetooth 2.0 SPP compatibility, which allows connection to a Bluetooth peripheral, such as a printer. Ruggedized Case The Infinea X case is IP54 rated for protection against dust and fluid ingress. ACCESSORIES Please visit our website at ipcmobile.com, or contact your Infinite Peripherals account representative, for additional information about our current and future product accessory offerings. Page 7 GETTING STARTED Warnings, Cautions and Notes Please observe the Warnings, Cautions and Notes presented throughout this manual. An explanation of these items is provided below: WARNING Actions may result in a serious outcome to the user (e.g., injury, death or other adverse affect). CAUTION Special care is required to avoid damage to the product or other property. NOTE Important points and tips about the product are being provided. First Steps Step Purpose 1. Install the Battery 2. Charge the Infinea X The Infinea X battery is shipped with approximately 30% of full charge capacity and should be fully charged before initial use. 3. Install Software Use of the Barcode Scanner, RFID reader and LED indicator features requires the installation of software on your iPhone. 4. Power on the Infinea X Initialize barcode scanner and/or RFID functions for use. Section INSTALLING THE INFINEA X BATTERY PACK CHARGING THE INFINEA X DEVELOPING APPLICATIONS POWERING ON THE INFINEA X Page 8 DEVELOPING APPLICATIONS FOR THE INFINEA X Software is not provided with your Infinea X. Please contact your reseller or Infinite Peripherals for Third Party software solutions. Integrating the Infinea X into your iOS application requires the use of the Infinite Peripherals Universal SDK. The SDK incorporates an API specifically for developing applications to use the functionality of the Infinea X; including, but not limited to, barcode scanning, read/write RFID and programmable LED capability of the Infinea X. For additional details on using the Infinite Peripheral Universal SDK, please refer to the SDKs documentation. For the latest Infinite Peripheral Universal SDK please visit our developer portal: https://developer.ipcmobile.com Page 9 PROGRAMMABLE OPTIONS Below are some optional settings for the Infinea X which can be configured via the SDK. Programmable Options Description Set Charging Enables or disables battery backup sharing capability to charge the iOS device from the IX removable battery. Charging Current Charging current may be set to 500mA or 1A. Default setting is 1A. The Infinea X supports the following Scan modes: • Single Scan Scanning a single barcode by pressing the Scan button. • Multi Scan Scanning multiple barcodes by pressing and holding the Scan button. • Motion-Detect Scanner is activated automatically when barcode is placed near the barcode engine. • Multi-Scan without Duplicates Scanning multiple barcodes without duplicates. Scan Mode Pass Through Sync When the pass through sync setting is enabled and the Charging Cup is plugged in to the wall outlet, the iOS device may be synced with a PC or MAC. Default setting is “OFF”. Note: If Pass Through Sync is enabled, the iOS device will not charge when plugged into an external charger. Set timeout for 60 or up to 64800 seconds (18 hrs.). Time Out Note: Default setting is subject to change for this feature based on specific use or integration. Page 10 PRODUCT OVERVIEW iPhone Receiver Port T6 Screw T6 Screw iOS On/Off Button Volume Buttons Scan Button T6 Screw T6 Screw Status LED Status LED Programmable Button T6 Screw T6 Screw iOS Home Button Page 11 iOS Camera Hole Barcode Scanner RFID Antenna Battery Latch Battery Pack Page 12 iOS On/Off Button Scan Button Programmable Button Page 13 Volume Buttons Battery Status Button Page 14 ASSEMBLING THE INFINEA X iPhone Installation 1. Open the Infinea X by loosening the socket head hex screws and gently flipping open the top cover. 2. On the i0S device, set the Ring Silent switch to Ring Mode. Slide the iOS device* onto the Lightning Connector until it clicks into place. Note: Infinea X is molded specifically to the compatible iOS devices listed at the beginning of this manual. iOS devices are not interchangeable. 3. Close the top cover while maintaining the position of the protective rubber bumper. Note: Before closing the top cover, wipe the interior glass with a clean, lint-free cloth to ensure your screen is clean and free from moisture. 4. Secure the cover by tightening the (6) socket head hex screws in the upper enclosure in the following order: • Top Left • Bottom Right • Top Right • Bottom Left • Center Left and Right Note: Do not over tighten screws as it may cause damage to the cover. The recommended torque is 2 lbs. max. Take care that the rubber bumper is properly aligned between the top and bottom covers. Failure to do so will compromise the liquid protection features of the Infinea X. Page 15 INSTALLING THE BATTERY PACK Standard and Extended Battery Installation The Infinea X is designed to support Standard and Extended external swappable battery packs. The swappable battery pack design reduces down time of the Infinea X. Follow the steps below to install or replace your Infinea X battery pack. 1. Check that the battery latch is in the fully open position. Take care not to force the battery into place if the latch is in the close/ lock position. 2. 3. Lower the battery pack into place as shown in the figure on the left. The battery should sit flat when installed correctly. With slight pressure on the backside of the battery pack, rotate the latch counter-clockwise 90-degrees, or until the battery is securely locked in place as shown in the figure on the right. Page 16 CHARGING THE INFINEA X There are two options for charging the Infinea X: • • By wall outlet By replacing battery The Infinea X supports pass through charging to the iOS device. The iPhone together with the Infinea X may be charged by attaching the Charging Cup to the bottom of the Infinea X and the USB end into an AC wall adapter. Due to charging requirements, the Infinea X and iPhone cannot be charged togther using a USB cable to PC connection. Battery Status To check the battery life of the Infinea X device, press either of the Battery Status buttons on the bottom left or right side of the device. If the green LED does not light up on the Infinea X device while charging, verify the USB connector is properly connected and the device is seated securely in the Charging Cup accessory. If the problem persists, contact Infinite Peripherals Technical Support for assistance. Battery Status 100%-75% LEDs are solid green upon pressing the Battery Status button. 74%-50% LEDs flash green upon pressing the Battery Status button. 49%-25% LEDs flash orange upon pressing the Battery Status button. 24%-10% LEDs flash red upon pressing the Battery Status button. 9%-1% One LED automatically flashes red to indicate emergency low battery status. When remaining battery capacity is below 15%, the automatic charge of the iOS device stops. The Infinea X standard battery has a capacity of 1,900 mAh. The extended battery pack (sold separately) offers a capacity of 3,800 mAh. Page 17 Charging Using an Electrical Outlet 1. Insert a Standard Battery into the Infinea X device, and then attach the Charging Cup to the bottom of the Infinea X. Listen for a click to ensure the device is fully seated in the cup. 2. Plug the USB connector end of the Charging Cup into an AC wall adapter (2.1 A), and then confirm the Infinea X LED indicator on the left side of the device turns green to indicate charging is active. 3. To check the battery life, you can press the Battery Status button and look at the status LEDs. Refer to the Battery Status table on Page 17 to determine the battery life in relation to the LEDs. To prevent electrical damage to the Infinea X and/or battery, please use the approved Charging Cup shipped with device. Page 18 Charging the User Replaceable Battery The multi-bay battery charger is an available accessory. Ten batteries may be charged at once. Each battery slot has an individual LED charge indicator. A red LED indicates that charging is in progress. A green LED indicates that the battery is fully charged. A typical full charge takes approximately 2.5 hours for a standard capacity battery and 5 hours for an extended capacity battery. Storage Instructions To store the device when not in use for an extended period of time, remove the Infinea X battery and power off the IOS device. Battery Disposal Dispose of used batteries according to federal law. This may include disposing them at a battery-recycling center or hazardous waste collection site. Page 19 POWERING ON THE INFINEA X Dual Purpose Scan Button The Infinea X uses a dual-purpose Scan/Power button to power on the Infinea X unit, as well as to scan barcodes. When the Infinea X is left idling for an extended period, the unit automatically goes into sleep mode to preserve the charge of the battery. Power On When the Infinea X is in the Off/Sleep mode, press the Scan/Power button to power on the unit. A single beep indicates the Infinea X is ready for use. Pressing the Scan button a second time will activate the scanner for normal barcode scanning. Custom software must be used in order for the Infinea X to communicate with the iOS device. Please consult your reseller for this software, or contact Infinite Peripherals for recommendations on compatible software solutions. Page 20 Barcode Scanning To scan a barcode: 1. Turn on the Infinea X by pressing the Scan button. 2. Position the scan head so the red target is aimed at the barcode, and the barcode is within the width of the red illumination cross hairs. 3. Slowly pull back the device to increase the distance between the barcode and scanner, until the scanner has read the barcode. RFID To capture RFID information: 1. Activate the Infinea X by pressing the Scan button. 2. Place the RFID tag/card over the receiver/transmitter. Keep the face of the tab/card flat with the receiver/transmitter and as close as possible. Depending on the type of RFID tags/cards being used, it may be necessary for tags/cards to make direct contact with the surface where the RFID receiver/ transmitter is located for proper read/write. Page 21 STATUS AND OPERATIONAL MODES Programmable LED Status The Infinea X provides application developers with programmable, multi-color LEDs, as shown in the figure below. Supported Colors: • • • • Red Blue Green Orange For information on programming the Infinea X LEDs, refer to the SDK documentation. Page 22 RESETTING YOUR INFINEA X The Infinea X uses the Battery Status indicator button and the Scan button to perform a soft-reset without removing the iOS device. The soft-reset feature cycles the power, allowing the Infinea X to restart. To Reset the Infinea X: 1. Press the Scan button and Battery Status indicator buttons simultaneously for about 3 seconds. The Infinea X main board will reset and provide an audible “beep” as confirmation. 2. Release both buttons to allow the Infinea X to restart. Note: If the Infinea X does not restart, repeat the above steps, as needed. SYNCING YOUR INFINEA X To sync an iPhone with iTunes through the Infinea X, connect the Infinea X to a computer using the Charging Cup, as shown in the figure below. The Infinea X should be in Sync mode. Refer to the iTunes documentation for instruction on syncing your iPhone. To disable Sync mode, exit iTunes and then unplug the Infinea X from the Charging Cup. If syncing feature does not function as described above, please contact your software application developer, as the sync feature may be disabled within your application. Page 23 TROUBLESHOOTING If you are having problems not related to scanning barcodes or reading/writing RFID Tags/Cards, refer to the table below for possible causes. Troubleshooting > General Problem 1. iOS device will not sync to iTunes. 2. iOS touch screen does not respond to swipe and tap gestures. 5. iOS device will not charge. Possible Cause • Infinea X is not configured for sync. • Top cover is not properly installed. • iOS device requires power cycle. • AC adapter may not meet charging requirements. • Pass Through Sync is enabled. Troubleshooting > Scanner If you are having problems scanning barcodes, refer to the table below for possible causes. Problem 1. 2. Scanner does not turn On. No barcode data returned during scanning. Possible Cause • Infinea X battery is low. • Infinea X not powered on by software. • Scan engine is faulty. • Charging Cup is connected to Infinea X. • Barcode is unreadable. • Infinea X battery is low. • Scan engine is faulty. • Software decoding incorrectly. 3. Unable to perform multiscanning. • Multi-scan mode not enabled. • Software does not support multi-scans. 4. Unable to hear scanner beep. • Sound mode not enabled. • Infinea X battery is low. 5. Unable to scan certain barcodes symbols. • Barcode type is not configured. Page 24 Troubleshooting > RFID If you are having problems reading or writing RFID Tags/Cards, refer to the table below for possible causes. Problem 1. 2. 3. RFID does not turn On. No/partial RFID data returned during scanning. Unable to read certain RFID Tags/Cards. Possible Cause • Infinea X battery is low. • Infinea X not powered on by software. • RFID reader is faulty. • Charging Cup is connected to Infinea X. • Unreadable RFID tag/card. • Infinea X battery is low. • Faulty RFID reader. • Software decoding incorrectly. • RFID type is not configured. If you are having problems with your Infinea X which are not addressed by the table above, contact technical support at support@ipcmobile.com. Page 25 CLEANING YOUR INFINEA X Cleaning Precautions The Infinea X is certified to meet IP54 Ingress Protection Marking per IEC 60529. Per the IP54 rating, the Infinea X is protected against interference with normal operation of the Infinea X sled caused by dust and splashing liquids. At no time should the Infinea X sled be completely immersed in liquid. Total submersion of the device may allow liquid to enter the unit and impair its normal function. Immersion will also void the Infinea X warranty. The end user should determine an appropriate cleaning procedure that complies with any facility and/or industry-specific cleaning requirements. The following information is a general cleaning guideline that should be followed to ensure the Infinea X maintains its normal operation. Cleaning Guidelines • Do NOT autoclave, machine wash, pressure-sterilize or gas-sterilize the Infinea X. • Do NOT soak or immerse in any liquid. • Clean the Infinea X only when the battery module is properly installed and locked into the Infinea X. This will ensure proper sealing of the Infinea X prior to introducing any solutions and/or wipes used during the cleaning process. • Apply cleaning solutions with a soft lint-free cloth. If the solution comes in the form of a wipe, ensure the wipe is lint-free and will not scratch the plastic surfaces (especially the scan window). Excessive solution that resides in any of the waterproof membrane orgasket areas can seep into the devices and cause damage to the internal components. • Do not touch, press or rub the display and/or covers with abrasive cleaning compounds, instruments, brushes, rough surface material or bring the display and/or covers into contact with products that could potentially scratch the display or covers. • To clean the Infinea X screw areas, use a soft-bristled brush with approved cleaning solutions. Focus cleaning in the screw areas, ensuring that the brush is not used in areas that contain seals or gaskets. • Do not use ammonia based, petroleum-based or acetone cleaning solutions to clean the Infinea X. Also avoid harsh solvents. • Use the following cleaning solutions only to clean the Infinea X exterior surfaces: • Clorox® Bleach (10%) • Isopropyl Alcohol Wipes (70%) Page 26 TECHNICAL DATA MECHANICAL Compatibility iPhone 7 Connectivity Apple Lightning™ connector Pass-through sync via iOS Weight 213 g with battery (7.52 oz.) (without iOS device) Dimensions Buttons 164mm (L) x 83mm (W) x 27.7mm (H) 6.5in. (H) x 3.3in (W) x 1.1in (H) • iOS On/Off • Scan button • Battery Status button • Programmable Button • Volume ELECTRICAL Barcode Scanner 2D High Speed Imager (supports all major 1D and 2D barcodes) Battery Capacity User-replaceable rechargeable hard pack Li-ion Battery 3.7V 1900mAh Power Consumption Deep sleep ~20uA Contactless Card Reader (RFID) ISO/IEC 14443 Type A/MIFARE • MIFARE MINI • MIFARE CLASSIC-1K, MIFARE CLASSIC-4K • MIFARE ULTRALIGHT, ULTRALIGHT-C • MIFARE PLUS 2K/4K • DESFire card • FeliCa ISO/IEC 14443 Type B - Supports most cards ISO/IEC 15693 - Supports most cards Bluetooth Bluetooth 2.0 Class 2 Distance – Up to 10m Serial Port Profile (SPP) Visual: • Indicators 4 programmable color LEDs (green, blue, red and orange) Audio: • Electromagnetic Buzzer Page 27 CERTIFICATIONS General Drop Rating CE, FCC, Apple MFi 1.22m (4 ft.) IP 54 rated ENVIRONMENT Operating Environment Storage Environment Temperature: +10°C to +40°C (50°F to 104°F) Humidity: 5 to 90% RH Temperature: -20°C to +50°C (-4°F - +122°F) Humidity: 5 to 90% RH Page 28 WARRANTY Infinite Peripherals does not warrant, and is not responsible for, any damage to the Infinea X (“Product”) or the assembled iOS device as a result of liquid or solid particle intrusion into the Product, or damaged caused by dropping the Product with the assembled iOS device. If a material or workmanship defect arises with regard to any Infinite Peripherals product, and a valid claim is received within the Warranty Period, Infinite Peripherals (at Infinite Peripherals’ sole discretion) will (1) repair the Product using new or refurbished parts or (2) replace the Product with a new or refurbished Product. For purposes of this limited warranty, “refurbished” means a product or part that has been substantially returned to its original specifications. In the event of a defect, these are your exclusive remedies. DISCLAIMER NO WARRANTY. This technical documentation is provided As Is. Furthermore, the documentation does not represent any commitment on the part of Infinite Peripherals, Inc. and does not warrant that it is accurate, complete or errorfree. Any use of the technical documentation is at the risk of the user. Infinite Peripherals, Inc. reserves the right to make changes to specifications or other information contained within this document, without prior notice, and the reader should in all cases consult Infinite Peripherals, Inc. to determine whether any such changes have been made. Infinite Peripherals, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. Infinite Peripherals, Inc. does not assume any product liability arising out of, or in connection with, the application or use of any product or application described herein. Page 29 PRODUCT RETURNS AND SERVICING Visit our online support center at http://ipcmobile.com/support/rma-support. html. Use the link provided to create an account and gain access to our Knowledge Base and online support services. Through our online support center, you’ll be able to download files, open a Support Ticket, manage your RMAs, view your account Profile and subscribe to Alerts. To Request a RMA 1. Create a user account in the RMA Support Portal at http://ipcmobile. com/support/rma-support.html. 2. Login to your user account and click the Create RMA Request option. 3. Read the instructions provided and complete the online request form. 4. Note the assigned RMA number and write it clearly on your shipping carton. Ship your equipment back to us at the address provided. Page 30 SYMBOLS FOR USE Symbol Definition Consult Instructions for Use Manufacturer Manufacture Date Serial Number P/N Part Number Waste Electrical and Electric Equipment Do Not Autoclave Do Not Incinerate Mark of conformity to European Union Directives Complies with part 15 of the FCC rules Page 31 FEDERAL COMMUNICATIONS COMMISSION Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the folloing two conditions: 1. This device may not cause interference and 2. This device must accept any interference, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Page 32
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2018:03:12 10:11:31-07:00 Creator : Adobe InDesign CC 13.0 (Macintosh) Modify Date : 2018:03:13 07:34:02-07:00 Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2018:03:13 07:34:02-07:00 Creator Tool : Adobe InDesign CC 13.0 (Macintosh) Instance ID : uuid:1d0932ce-7cb5-49b2-b84c-dd32ca60a040 Original Document ID : xmp.did:F77F1174072068119AD6C4698A9D3B1C Document ID : xmp.id:a9f29adb-09fd-49c4-88de-4b7106c0bc90 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:ec6b1141-65ae-464c-8485-63630fd0ad70 Derived From Document ID : xmp.did:1690ae02-82b3-4d72-8283-5eedb2af868f Derived From Original Document ID: xmp.did:F77F1174072068119AD6C4698A9D3B1C Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.0 (Macintosh) History Changed : / History When : 2018:03:12 10:11:31-07:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 32EXIF Metadata provided by EXIF.tools