DDPAI Technology X2PRO DDPai User Manual

DDPAI Technology Co., Ltd DDPai

User Manual

2.Configuration&ButtonInstructionNotes: Please do select Class 10 high-speed storage card. Format the card by DDPai APP before using.⑩ConnectingWireforRearDashCam⑧Holder⑨Front&RearChannelConnectionIndicatorLampRearCarCamInterface⑩⑪PowerInterface⑫RearChannelOperatingIndicatorLamp⑬RearChannelConnectorTF①ParkingMonitoringIndicatorLamp②MicroSDCard③Reset④Speaker⑤OperatingStatusIndicatorLamp⑥MIC⑦MuteButton&MuteIndicatorLamp3.InstallationSteps Notes: Both of front and rear car cam shall use indoor only, please do not use them outdoor.RecommendedInstallationPosition1)Installation position of front car cam; Wiring method for power line.2)Rear car cam installation position & wiring method for power line4.IndicatorLampStatusInstruction5.Download&InstallationofDDPaiAPP6.APPInstruction1)OntheRoad 2)Camera“On the Road” displays users’ road trip stories, such as driving diaries, photos, videos, footages.Android system: add camera hereiOS system: add camera here1)Working Condition: one ash per second; 2)Failure Condition of TF Card: quick ash; 3)Failure Condition: keeps on1·Operating Indicator LampParking Monitoring Mode: indicator lamp ash once per second3·Parking MonitoringIndicator Lamp Indicator lamp keeps on when front and rear car cam is connected4·Front & Rear Channel connecting indicator lamp 5·Rear Channel Operating Indicator Lamp 1)Working Condition: one ash per second;2)Failure Condition: keeps on1)Mute Condition: the indicator lamp lights up when press the mute button;2)Sound Recording Condition: press mute button again when the indicator lamp lights off2·Mute Indicator LampTrending Activit y La te stSharing Shortcut AccessCameraOn The Roa dAlbumsMeCameraAddcam era1.PackageContents①X2ProFrontCarCam ②X2ProRearCarCam③RemoteSnapshotButton ⑤PowerWire④ConnectingWireforRearCarCamiOSDownload AndroidDownloadTakeoutbyslidingrightScan the QR code from the right side to download DDPai APP according to the reminder. Users could download “DDPai” APP (Android 4.0 & above/iOS7.0 & above) from our ofcial website（en.ddpai.com), mobile application store (Andriod), APP Store (iOS) as well .This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.Warning: Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:FCCSTATEMENT:RFwarningstatement:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Navigation menu