DEI Sales Polk Audio HINGEWIRELESS Hinge Wireless User Manual P HingeWireless MN2962 indd

Download:
Mirror Download [FCC.gov]
Document ID	2334515
Application ID	l7PQlGErrchsPvyrGIIpOQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	179.34kB (2241787 bits)
Date Submitted	2014-07-24 00:00:00
Date Available	2014-07-24 00:00:00
Creation Date	2014-07-08 15:54:12
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2014-07-08 15:54:16
Document Title	P_HingeWireless_MN2962.indd
Document Creator	Adobe InDesign CC (Macintosh)

hinge wireless
™
headphone manual
écouteurs manual
hinge wireless
Using your Headphones
Bluetooth® Wireless Technology
Listen
To use your Bluetooth wireless technology device
with the Hinge wireless, you must first pair your
device with your Hinge wireless.
But first…turn down the volume on your music player before putting on your
headphones. Connect with or plug the headphone cable into the 1/8” (3.5 mm)
stereo jack on your music player.
Important: Headphones have a left and right orientation. They use the markings “L”
and “R” to indicate which earcup goes on which ear. These markings can be found on
the inside of the headband.
You only have to pair your Hinge wireless with your
Bluetooth device one time. After that you simply
select the “Polk Hinge” from your device
list to make the connection to your headphones.
Adjusting the Hinge wireless headband
Connecting with NFC
For optimum performance and comfort, you want your headphones to fit snugly
and create a comfortable yet effective seal on your ears. A proper fit ensures the
best sound as well as some effective noise reduction from outside sources. Working
together, the headband and the pivoting earcups will fit any size head, even yours.
•
•
•
The headband should sit flat across the top of your head.
Adjust the built-in headband slider as necessary
The pivoting headphone earcups should fit on your ears and you should feel an
even snugness all the way around and against your ears. This indicates a good fit,
which means outside sounds should be muffled.
Charging your headphones
Use the Micro USB port to charge your headphone’s battery. Charging should take no
longer than 2 hours. A fully charged battery should provide up to 12 hours of listening.
When fully charged, the LED will be green.
Built-in microphones
A chat microphone and a noise cancellation microphone are built into the right
earcup. These microphones use Digital Signal Processing to optimize voice clarity.
LED Status
LED
Description
Flashes white
Bluetooth pairing mode
Solid white
Bluetooth connected, battery charge good
Pulses amber
Headphones charging
Solid green
Headphones fully charged
Solid amber
Battery charge low
touch NFC
enabled
device here.
Near Field Communitcation gives you the ease
and convenience of simply “touching” your
Bluetooth/NFC compatible device to the left
earcup to pair and connect.
Pair and Connect your Bluetooth
device with the Hinge wireless
1. Make sure your Bluetooth device
and Hinge wireless are powered on.
2. Activate the Bluetooth function on
your Bluetooth source device.
3. Press and hold the 3-button control for
4 seconds to put the Hinge wireless in
pairing mode. The LED will flash white
as it looks for a device to pair with.
4. Your Hinge wireless will now be displayed
on your source device and available to pair
and/or connect. Select “Polk Hinge” on your
device to initiate the connection process.
5 Play your music from your device!
Built-in 3-button control
In-line Controls
The built-in 3-button control dials up and
down, and presses in; the wheel enables
you to adjust volume, mute, control music
tracks, pair and connect Bluetooth and
take phone calls
Your Hinge wireless also comes
with an in-line 3-button remote.
Function
Built-in 3-button control
On/Off
Press and hold for 2 seconds; the headphones
turn on and search for the last connected device.
If no device is found after 10 seconds, the headphones enter Bluetooth pairing mode.
Volume Up/Volume Down
Push up on the control wheel up to increase
volume; Push down on the wheel down to
decrease volume.
Bluetooth pairing mode
Press and hold 4 seconds; the headphones
enter Bluetooth pairing mode.
Play/Pause
Press 1 X to play; press 1 X to pause.
Skip Forward/Backward
Press 2 X to go to next track; press 3 X to
go to previous track.
Answer call/End call
Press 1 X to answer an incoming call;
Press 1 X to end the call.
Press and hold (less then 2 seconds) to ignore
incoming call.
Call waiting
Press 1 X to switch to incoming call,
current call is put on hold.
End active call,
take incoming call
Press and hold to switch to incoming call and
end current call.
When a cable is plugged into the AUX IN jack, the headphones will automatically switch
to AUX mode. We recommend turning off the headphones when using AUX mode to
conserve battery life. Bluetooth cannot be used when the headphones are in AUX mode
(a cable is plugged in).
Care & Storage
How to Clean Headphones
Important: Use a damp cloth to
clean the headphones. DO NOT
get any liquid in them.
Use warm water and a mild dish soap
on a damp cloth to remove dirt.
DO NOT use harsh cleaning agents.
Storing your Headphones
Store your headphones in their protective case. Store the case in a clean, dry
environment. DO NOT expose your headphones to extreme heat or cold, high
humidity or liquids.
Troubleshooting
Problem
Try this
There is no sound.
Turn the music source up.
Make sure the cable is securely connected.
Volume is low.
Turn the music source up.
Make sure the cable is securely connected.
There is a lack of bass.
Adjust the headphones to fit properly.
Make sure the cable is securely connected.
Check the sound settings on your device.
The microphone is
not working.
Ensure the microphones on the front and
rear of the right ear cup are not blocked.
Make sure the cable is securely connected.
The telephone does not
respond to controls.
Make sure you’re using a compatible product.
Apple product does not
respond to controls.
Make sure you’re using a compatible product.
Make sure the cable is securely connected.
hinge wireless
Technical Assistance
Customer Service
If anything is missing or damaged, or if your headphones fail to operate, contact the
authorized Polk dealer where you made your purchase, or contact Polk Customer
Service immediately at 1-800-377-7655 (M-F, 9:00 AM-5:30 PM EST, USA & Canada only).
If, after following the setup directions, you experience difficulty, please double check
that you followed the instructions correctly. Should you isolate the problem to a defect
in the headphones, contact the authorized Polk dealer where you made your purchase,
or contact Polk Customer Service by phone or via email: polkcs@polkaudio.com.
Outside the USA & Canada, call +1-410-358-3600.
Product Disposal
Certain international, national and/or local laws and/or regulations may apply regarding
the disposal of this product. For further detailed information, please contact the retailer
where you purchased this product or the Polk Importer/Distributor in your country.
Important Performance & Safety Tips
WARNING: Listen Carefully
Polk headphones are capable of playing at extremely high volume levels, which could
cause serious or permanent hearing damage. Polk, Inc. accepts no liability for hearing
loss, bodily injury or property damage resulting from the misuse of its products. Besides,
we want you to keep your hearing so you’ll buy more Polk products.
Enjoy your Polk Headphones Responsibly
It’s a very bad idea, and in many jurisdictions against the law, to operate a vehicle
while wearing headphones. Crossing streets without being able to hear what’s going
on around you can be dangerous as well. Use your good common sense and never
play headphones in an environment, or during an activity, that requires your complete
attention. The sounds you hear around you could save your life.
How Loud is too Loud?
Polk headphones are capable of reproducing excellent musical detail, even at lower
volume levels. You should limit prolonged exposure to volumes that exceed 85 decibels
(dB). Regular exposure to sound over 100 dB for more than 1 minute risks permanent
hearing loss. For more about safe volume levels, go to the Occupational Health and
Safety Administration (OSHA) guidelines at www.osha.gov.
important safety instructions
This product was designed and manufactured to meet strict quality and safety standards. There are,
however, some installation and operation precautions which you should be particularly aware of.
Read Instructions. All the safety and operating instructions should be read before the
1.
system is operated.
Retain Instructions. The safety and operating instructions should be retained for future reference.
2.
Heed Warnings. All warnings on the appliances and in the operating instructions should
3.
be adhered to.
Follow Instructions. All operating and use instructions should be followed.
4.
Cleaning. Unplug the appliance from wall outlet before cleaning. Do not use liquid cleaners or
5.
aerosol cleaners. Use a damp cloth for cleaning.
Attachments. Do not use attachments not recommended by the product manufacturer as they may
6.
cause hazards.
Water and Moisture. Do not use these appliances near water for example, near a bath tub,
7.
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
Accessories. Do not place these appliances on an unstable cart, stand, tripod, bracket, or table. The
8.
audio/video products may fall, causing serious injury to a child or adult, and serious damage to the
products. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer,
or sold with the appliances. Any mounting of the appliances should follow the manufacturer’s
instructions, and should use mounting accessories recommended by the manufacturer.
Ventilation. Slots and openings in the cabinet are provided for ventilation and to ensure reliable
9.
operation of the appliances and to protect them from overheating, and these openings must not be
blocked or covered. The openings should never be blocked by placing the products on a bed, sofa,
rug, or other similar surface. This product should never be placed near or over a radiator or heat
register. This product should not be placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s instructions have been adhered to.
10. Power Sources. This product should be operated only from the type of power source indicated
on the marking labels. If you are not sure of the type of power supply to your home, consult your
appliance dealer or local power company.
11. Grounding or Polarization. This product is equipped with polarized alternating-current line plugs
(plugs having one blade wider than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat
the safety purpose of the polarized plug.
12. Power Cord Protection. Power-supply cord should be routed so that it is not likely to be walked
on or pinched by items placed upon or against it, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the appliances.
13. Lightning. For added protection for this audio/video product during a lightning storm, or when
it is left un-attended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the product due to lightning
and power-line surges.
14. Power Lines. An outside antenna system should not be located in the vicinity of overhead power
lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
15. Overloading. Do not overload wall outlets and extension cords as this can result in a risk of fire
or electric shock.
16. Object and Liquid Entry. Never push objects of any kind into this product through openings, as they
may touch dangerous voltage points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on this audio/video product.
17. Servicing. Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
18. Damage Requiring Service. Unplug this product from wall outlets and refer servicing to qualified
service personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
hinge wireless
If the product does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions, as an improper adjustment
of other controls may result in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f.
When the product exhibits a distinct change in performance this indicates
a need for service.
19. Replacement Parts. When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or that the parts have the same characteristics as
the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
CAUTION: Danger of EXPLOSION if battery is incorrectly replaced.
WARNING: Do not expose batteries or battery pack to excessive
heat such as sunshine, fire or the like.
20. Safety Check. Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to determine that the
products are in proper operating condition.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
(1) Reorient or replace the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
(4) Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device.
le présent appariel est conforme aux CNR d’ldustrie Canada applicables aux appreils radio exmpts de
license. L’exploitationest autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage redioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Limited One Year Warranty
product disposal
The Warranty terms and conditions applicable to Products purchased in other countries are
available from the Polk Authorized Distributors in such countries.
d.
Certain international, national and/or local laws and/or regulations may apply regarding
the disposal of this product. For further detailed information, please contact the retailer where you
purchased this product or the Polk Importer/Distributor in your country.
A listing of Polk Audio Importer/Distributors can be found on the Polk website
`www.polkaudio.com or by contacting Polk Audio at: 5601 Metro Drive, Baltimore, Maryland
21215, USA. Phone: +1-410-358-3600; in California: 1-800-377-7655.
Polk , Inc., warrants, to the original retail purchaser only, that this Polk Headphone Product will be free
from defects in material and workmanship for a period of one (1) year from the date of original retail
purchase from a Polk Authorized Dealer. This warranty will terminate automatically prior to its stated
expiration if the original retail purchaser sells or transfers the product to any other party.
To allow Polk to offer the best possible warranty service, please register your new product online at:
www.polkaudio.com/registration or call Polk Customer Service at 800-377-7655 in the USA and
Canada (outside the USA: +1-410-358-3600) within ten (10) days of the date of original purchase.
Be sure to keep your original purchase receipt.
Defective Products must be shipped, together with proof of purchase, prepaid insured to the Polk
Authorized Dealer from whom you purchased the Product, or to the Factory at 1 Viper Way, Vista,
California 92081. Products must be shipped in the original shipping container or its equivalent; in any
case the risk of loss or damage in transit is to be borne by you. If upon examination at the Factory or
Polk Authorized Dealer it is determined that the unit was defective in materials or workmanship at any
time during this Warranty period, Polk or the Polk Authorized Dealer will, at its option, repair or replace
this Product at no additional charge, except as set forth below. All replaced parts and Products become
the property of Polk. Products replaced or repaired under this warranty will be returned to you, within a
reasonable time, freight prepaid.
This warranty does not include service or parts to repair damage caused by accident, disaster, misuse,
abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage inputs in excess
of the rated maximum “of the unit, cosmetic appearance not directly attributable to defect in materials or
workmanship, or service, repair, or modification of the Product which has not been authorized or approved
by Polk. This warranty shall terminate if the Serial number on the Product has been removed, tampered
with or defaced.
This warranty is in lieu of all other expressed Warranties. If this Product is defective in materials or
workmanship as warranted above, your sole remedy shall be repair or replacement as provided above.
In no event will Polk, Inc. be liable to you for any incidental or consequential damages arising out of the
use or inability to use the Product, even if Polk, Inc. or a Polk Authorized Dealer has been advised of the
possibility of such damages, or for any claim by any other party. Some states do not allow the exclusion
or limitation of consequential damages, so the above limitation and exclusion may not apply to you.
All implied warranties on this Product are limited to the duration of this expressed Warranty. Some states
do not allow limitation on how long an implied Warranty lasts, so the above limitations may not apply to
you. This Warranty gives you specific legal rights, and you also may have other rights which vary from
state to state.
This Warranty applies only to Products purchased in Canada, the United States of America, its
possessions, and U.S. and NATO armed forces exchanges and clubs.
Thank you for your Polk purchase. If you have a question or comment, please feel free to call us or email us.
In North America and Canada, call Polk Customer Service 800-377-7655 (M-F, 9:00 AM-5:30 PM EST)
or via email polkcs@polkaudio.com. Outside the US, call +1-410-358-3600.
5601 Metro Drive
Baltimore, MD 21215
www.polkaudio.com
Copyright © May 2013
HBP2662B
Designed & engineered by Polk at its research facility in Baltimore, MD, USA. Made in China.
Polk is a DEI Holdings, Inc. Company. Polk is a registered trademark of Polk Audio, Inc.
Hinge are trademarks of Polk Audio, Inc.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks
of Apple Inc., registered in the U.S. and other countries. The remote and mic are supported
only by iPod nano (4th generation and later), iPod classic (120GB, 160GB), iPod touch (2nd
generation and later), iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPad (3rd generation and
later), iPad mini, iPad 2 and iPad. The remote is supported by iPod shuffle (3rd generation
and later). Audio is supported by all iPod models. “Made for iPod,” “Made for iPhone,” and
“Made for iPad” mean that an electronic accessory has been designed to connect specifically
to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with
iPod, iPhone, or iPad may affect wireless performance.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Polk Audio is under license. Other trademarks and trade names
are those of their respective owners.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.5-c021 79.154911, 2013/10/29-11:47:16
Create Date                     : 2014:07:08 15:54:12-04:00
Metadata Date                   : 2014:07:08 15:54:16-04:00
Modify Date                     : 2014:07:08 15:54:16-04:00
Creator Tool                    : Adobe InDesign CC (Macintosh)
Instance ID                     : uuid:2193d189-002c-104f-8468-fab1ab5b69a0
Original Document ID            : xmp.did:7FF71374072068118A6DEEDA270D9278
Document ID                     : xmp.id:c32691da-fb34-4b6e-a2f1-e8181f8c913f
Rendition Class                 : proof:pdf
Version ID                      : 1
Derived From Instance ID        : xmp.iid:b2c0a2c6-8d0f-4af6-a17c-03ff9f06c64b
Derived From Document ID        : xmp.did:26F8F00C0B2068118A6D8BB6A5A78F1F
Derived From Original Document ID: xmp.did:7FF71374072068118A6DEEDA270D9278
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC (Macintosh)
History Changed                 : /
History When                    : 2014:07:08 15:54:12-04:00
Format                          : application/pdf
Title                           : P_HingeWireless_MN2962.indd
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Page Count                      : 6
Creator                         : Adobe InDesign CC (Macintosh)

EXIF Metadata provided by EXIF.tools