DENSO TEN BT005A Vehicle Display with Bluetooth Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	612330
Application ID	z/UTIkeCThC8nmH5xA0V6w==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	229.35kB (2866828 bits)
Date Submitted	2005-12-16 00:00:00
Date Available	2005-12-16 00:00:00
Creation Date	2005-12-16 11:45:06
Document Lastmod	2005-12-16 11:45:45
Document Title	Users Manual

INFORMATION
In the following conditions, the sys-
tem may not function.
0 The cellular phone is turnad off,
a The current posltlon ls outside the
communication area.
a The cellular phone Is not connected.
oThe cellular phone has a law bat-
rery.
174
27P333 27mm
By pushing the telephone button above, You can use the microphone above
you can receive a call or hang up with- when talking on the phone4
out taking your hands on (he steerlng
WheeL
The other party’s voice outputs from the
driver's speaker. When the received calls
or recelved voice outputs, the audio from
the audio system will be muted.
INFORMATION
OTalk alternately with the other party
on the phone. if you talk at the
same time, the voice may not reach
each other. (it [s not a malfunc-
tlon.)
0 Keep the volume of receiving voice
down. Otherwise, echo is coming
up. When you talk on the phone,
speak clearly towards the micro-
phone.
tin the following situations, your
voice may not reach the other party.
ODriving on unpaved road. (Mak-
Ing a traffic noise.)
6 Driving at the high speed.
0 The window is open.
OTurnlng the air conditioning vents
towards the microphone.
oThe sound of the air conditioning
fan is loud.
(J. ,:t’z.'..<) tam '(‘ tiil':
(mm’m 7 7
'" j‘xtm'\r_
21mm
1. indicates the condition of Biuetooth
connection
“Blue" indicates an Excellent connection
to Bluetooth.
“Velluw” indicates a bad connection in
Bluetocth. resulting in possible deteriora-
tion of voice quality.
E‘fi : no connection to Bluetooth.
,T_
2. indicates the amount cit
charge left.
I an m
Empty <—————> Full
It is not displayed while the Bluetooth ls
oonnsoting or the phone book data is be-
ing transferred.
The amount left does not always corre-
spond with the one of your cellular phone,
This system does not have a charging
function.
3. Indicates the receiving area.
battery
“Rm" is displayed when receiving ln
Roaming area.
“Hm“ is displayed when receiving in
Hume area.
4. Indicates the level of reception.
Too bad <1—-——> Excellent
The level of reception doss not always
correspond with the one of your cellular
phone.
175
INFORMATION
This system supports the following
service.
a HFP (Hands Free Profile) Ver. 1.0
o OPP (Object Push Profile) Ver. 1.1
Iv your cellular phone does no! sup-
port HFP, you cannot enter the Blue-
tooth phone, and take opp service
indlvldunlly,
An antenna (or the Bluatooth conneox
tIon Is bum in the display. The Indica-
fion of the Blueloolh connection may
ium yellow and the system may not
function when you use the Bluetoolh
phone in the following condillons and
placesi
c Your cellular phcne is hiding behind the
display (behind me seat or in ma glove
box and console bcx).
B Ynu! cellular phnne Icuches or is cov-
ered with metal mateilals
Leave the Bluetcalh phone on me place
where ”Blue" indication is displayed
176
SEBluetuoth'
Bluctuoth is a trademark owned by Blue-
looth SIG Inc
when you release your vehicle:
A mi of personal data Is regisiered
when you use the hands—free system.
When you release your vehicle, Inllial~
ize your data‘
If you Inlllalizs ii, the former slate will
never come back again Pay much atten-
(Inn when initializing [he data.
You can initialize the lcllcwing data in lhs
syslem.
- phone book data
9 dialed numbers and reoelved calls
0 speed dial
a Bluetciolh phone data
a security code
to operate the equipment.
FCC ID : BABBTOOSA
IC ID : 2024B-BT005A
MADE IN JAPAN
This device complies with Part 15 of the
FCC Rules and RSS-Gen of the IC
Rulesi Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference, and (2) this
device must accept any interference
received, including interference that may
cause undesired operation.
Changes or modifications not expressly
appmved by the party responsible for
compliance could void the user' 5 authority
This transmitter must not be co-iooated or
Operated in conjunction with any other
antenna or transmitter.
This equipment complies with FCC
radiation exposure limits set forth tor
uncontrolled equipment and meets the
FCC radio frequency (RF) Exposure
Guldeiina In Supplement C to OER-35.
This equipment has very low levels of RF
energy that it deemed to comply without
maximum permissive exposure evaluation
(MPE). But it is desirable that it should be
Installed and operated with at least 205m
and more between the radiator and
person’s body (excluding extremities:
hands, wrists, test and legs).
(a) Entering a Bluetooth phone
To use the hands-free system, you
need to enter your phone into the sys-
tem Once you have registered it, you
can make a hands-free call.
1. Push the “INFO” button to display
the “information" screen,
"GJ hiolmilibn
Z7P181
2. Touch the “Telephone" switch to dis-
play “Telephone” screen.
You can also push the @ button of the
steering wheel to display this screen when
the vehicle is stopped
7—
4, zed ( 3h} ‘
( “155mm;
3, Touch the “Settings” swimh to dis-
play “Settings” screen.
177
,L
27P1 ea
(“fl
Delavild
ki/
27P1sa
27P1 55
4, Touch (he “Bluelooth” switch to dis-
play the “Bluetooth Seltlngs" screen.
178
5 Touch the “Register” switch lo cen-
nect your cellular phone lo the sys-
lem.
6. When lhls screen Is displayed, input
the Passkey displayed on the screen
into the phone.
For the nperalicn of the phone, see the
manual that comes with your cellular
phone4
lf you want to cancel ill touch "Cancel'fi
27P156
g Connen'muc'iuntfi , ' " '
Bin: mum wmfimmi
‘theda 1m Pais'feyzuyd
27P1a7
7. when the connection is completed, When (his screen is displayed, fouow the
this screen Is displayed. guidance on the screen to try again
You do not need to enter the phone in
case of using (he same one
0 Connecting a Bluetooih phone
(is) automatically
27P1as
When you reglster your phone, auto
connection will be turned on. Always
set It to this mode and leave the Blue-
toath phone In a condition where con-
nection can be establlshed.
Each time you much the "Auto Connect"
switch, auln connection WHI be switched
on or off,
179
27F189
When the “ACC” or “IQ—ON" mode is
enabled, the selected Bluetooth phone
will be automatically connected and the
connection result is displayed.
This screen appears when the Bluetcolh
phone is first connected after the "ACC"
or "IS—ON” mode is enabled.
180
(b) manually
When the auto connection failed or
turned on, you have to connect Blue-
tooth manually.
27P190
Touch the “Connect” switch after hav-
ing enabled the alnetocth connection
on the phone.
27le
when the connection is completed, this
screen is displayed.
Now you can use the Bluetooth phone.
5 Flaconnecting the Eluetooth phone
If the Bluetooth phone is disconnected
with a poor reception tram the Blue-
tooth network when the “Ace" or “IG~
ON" mode is enabled, the system auto~
matlcally reconnecis the Blueiooth
phone. in this case, the connection
result is not displayed.
If the Biuetcuth is disconnected on pur-
pose such as you turned your cellular
phone off, this does not happen. Racon-
nest it by the following methods.
0 Select the Biuetuoth phone again.
, Enter the Bluetcoth phone.
J“
(b) Calling on the Bluetooth phone
After you enter the Blustooth phone,
you can call by using hands—tree sys-
tem. You can call using the 7 methods
described below.
(i) By dial
Von can call by inputting the telephone
number.
This cannot be operated while you are
driving.
27P192
Touch the desired key to input the tele-
phone number.
7“
Each time you touch “4". an inputted
digit is deleted,
When you touch “am the number you
called last is inputted.
Touch or push (he 6 button of the
steering wheel,
181
(ti) By phone book
You can call by phone book data which
is transferred from your ceuulsr phone.
The system has one phone book. Vou
can register up to 1000 numbers.
This cannot be operated whtle you are
driving.
27F193
Touch the desired key to Input the tele-
phone number.
1. Touch the “Phone Book” switch to
display “Phone Book“ screen.
182
27P194
2. Select the desired number 9mm the
list.
27m 95
Touch or push the 5 button of the
steering wheat.
(iii) By dialed numbers
You can call by dialed number, The
system memorizes up to 5 dialed num-
bers. If i! is over 5, the oldest number
is deleted.
This cannot be operated while you are
driving.
27F1 96
1. Touch the “Call Log" switch to d
play “Outgoing Calls“ screen.
27P1 97
oWhen you can by phone book, the
name (if registered) is displayed.
9 When you call the same number can-
li nuously,
registered.
eniy the newest number is
2. Select the desired number from the
list.
Touch ‘E” or push
sieering wheel.
279198
the 5 bunch of the
183
(iv) By received calls
You can call by received calls. When
a call Is received, the system memo-
rizes up to 5 numbers. I! ii is over 5,
lhe oldest number is deleted.
This cannot be operated while you are
driving.
1. Touch the “Call Log" switch to dis-
play.
184
27P199
27P200
2. Touch the “lncamlng Calls” switch to
display "lncomlng calls" screen,
—f
9 When a telephone number registered in
the phone book is received. the name
and the number are displayed,
0 Received calls which you dld not an-
swer are also memorized in the system
and “Abs." is displayed an the left
side of the number.
9 Unncticed lelephuns number such as a
publlc telephone is not memorized in
the system,
a. Select the desired number from the
Ilst.
27P198
Touch or push lhe 3 bullen of the
steering wheel,
0 An international phone call may not be
made depending on the cellula! phone
which you have,
(v) Eyspeed dlal
You can can by registered telephone
number whlch yau selected from a
phone book, dlaled numbers and re-
ceived culls. (See page 192 for rsgie
tering the speed diaL)
27F201
1. Touch the "Speed Dial” switch to
display "Speed Dlal” screen.
‘ a. helium.
—;’ _(
2. Touch the desired number to call.
You can change the page by touch-
Ing “Speed Dial 2" or “Speed Dlal
3".
When you push the telephone button while
you ate driving, the screen above ep-
peal’s. Touch the desired name to call.
(The telephone number is not displayed)
185
ZU
(VI) By voice recognition
J__
Example: oaii Charlize
27P203
27P194
You can call by giving a command. (For
the operation and command of voice
recognitlon, see "Speech Command
System" on page 236 and “Help screen“
on page 2:18.)
9 Dialing by name
Vou can call by giving a voice tag reg-
istered in the phone book. For setting
the voice recognition, see “Setting the
voice recognition" on page 2114
186
ch: Push the taik switch.
System: "Afler the beep, please say the
name.“
You: "Charlize."
System: ”Charlize chosen“ when ready,
please briefly push the talk
switch or push the off-hock
switch to dial."
You: Push the talk switch.
System: “After the beep. please say
”Dlal"."
You: “DIaI.”
System: "Dieting the name."
Now you can call Charlize.
‘L
27on4
"Next" is displayed Whan multlple entries
are found for a ssarched name.
Up to 5 entries can be displayed includlng
the flr$t searchéd one,
Do the following to change the entry to
the next anti
0 Touch the “Next" switch.
' Push the talk switch to say “Next Can»
didate",
Calling wlthoul the volce recognition.
After the entry number is displayed, you
can also call by pushing the leleohnne
button or touching the "Dial” swimh,
_L
Cancelling the voice recognition
The volce recognlllun will be cancelled
when you do the following.
0 Keep on pushing ihe ialk switch,
0 Push the © bunch of the steerlng
wheat
. Tnucn ihe “Cancel" switch (Except fur
recognizing the command)
s Say “Cancel".
D Dlaling by phone number
You can call by giving a desired num-
ber.
27P205
187
You:
System:
Vou:
System:
You:
System:
Vou:
System:
Push the talk swlmh.
"After the beep, proaso say the
number,"
"812337“
"When ready,» please briefly
push the talk switch or push
the off—hook switch to dial."
Push the talk switch.
"After the beep, please continue
to add numbers or say “D03|"."
“Dial."
“Dlaling the number."
Now you can can 812387.
188
a Sending a tone
You can send a tone by giving a de-
slrad number.
( 4am”
17m.) r s .
Ha
You: Push the talk switch.
System: "Say numbers, pound, or star."
You: “1234."
System: “1234," “Push the talk switch."
You: Push the lalk switch.
System: "Send? Say Yes or No.“
You: "Ves."
System: "Sending."
Now you can send the tone,
Ti
(VII) By POI call
27P2m
You can can by touching “HE when it
is dlsplayed on the screen from Naviga-
tion system. (559 the separate “Navi-
gation System owner’s Manual” lor de~
nails.)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:12:16 11:45:45-08:00
Create Date                     : 2005:12:16 11:45:06-08:00
Title                           : 
Subject                         : 
Author                          : 
Creator                         : 
Producer                        : 
Page Count                      : 15
Mod Date                        : 2005:12:16 11:45:45-08:00
Creation Date                   : 2005:12:16 11:45:06-08:00
Metadata Date                   : 2005:12:16 11:45:45-08:00

EXIF Metadata provided by EXIF.tools