DENSO TEN BT007A Display with built-in Bluetooth User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	651483
Application ID	SAPzRQ/R8/UvOYm9AGRNNQ==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	282.57kB (3532127 bits)
Date Submitted	2006-04-26 00:00:00
Date Available	2006-04-25 00:00:00
Creation Date	2006-03-23 14:47:27
Document Lastmod	2006-04-10 11:01:21
Document Title	users manual

INFOHMATION
In the inilowlng conditions, the sys-
tem may not function,
a The cellular phone is turned all.
0 The current pas/flan is aufslde the
communicailon area.
0 The cellular phune IS not connec‘tad.
9 The cBllU/SI’ phane has 5 law bat-
rem
‘ By pushing me telephone button abuvs, You can use the microphone above
you can receive a can or hang up with— when talking on the phone. 5
out taking your hands on the steering
wheel.
174 L
fl?
The nthei party's voice outputs from the
dliver's speaker. When the received calls
or leceived voice outputs, the audio from
the audio system will be muted
INFORMATION
oTelk alternately with the other party
on the phone. it you talk at the
same time, the voice may not reach
each other. (It Is not a maltunu
tion.)
0 Keep the volume of receiving voice
downt otherwise. echo is coming
up. When you talk on the phone,
speak clearly towards the micro-
phone
a in the tollowlng situations, your
voice may not reach the other party.
0Driving on unpaved road. (Mak-
ing a name noise.)
6 Driving at the high speed.
0The window is open,
0 Turning the air conditioning vents
towards the microphone.
0 Ths sound of the air conditioning
fem is loud.
l.
nm
to
Btu
63 (in?) if ‘
w?
indicates the condition at Bluetoolh
connection.
lie" indicatee an exceiienl connection
Bluelooth,
“Yellow" indicates a bad connection in
sleuth, resulting in possible deteriora-
tion of voice quality
El? :
no connection to Bluetnolh
2. indicates the amount of battery
chargaiett.
- m m
Empty <—”_—"> Full
It is not displayed while the Biuetooth is
connecting or the phone book data is be—
ing transferred
The amount let: does not always corre-
spend with the one oi youi cellular phone.
This system does not have a charging
function.
3. indicates the receiving area.
"Rm” is displayed when receiving in
Roaming area
“Hm” is displayed when receiving in
Home area.
it. Indicates the level of reception.
Too bad <——> Excellent
The level of reception does not always
correspond with the one of your cellular
phone.
175
INFORMATION
This system supports the lollowlng
ssrvlcs.
c HFP (Hands Fm Profile) Var. 1,0
OOPP (chisel Push Proms) Var. m
ll your cellular phono does not supc
pen HFP, you cannot enter the Blue-
loolh phone. and lake OPP snnflca
lndlvidually.
An antenna for Chi Bmelooth connec-
tion In bull! In the display. The indica-
tion of the Bluetomh connmlen may
lurn yollow and tho system my not
lunnlion whan you use the Bluerlooth
phone in the following condlllons aml
Nae-a.
0 Your cellular phone ls hldlng bahlnd lhe
display (behlnd the sear! or in the glove
box and console box).
0 Your oallular phone touches or is cov-
axed with metal materials
Leave the Bluelaolh phcno on tho macs
where “Blue" lncfinatlwn ls displayed
EBBluelooth'
Blualuolh is a trademavk owned by Blue—
lnolh SIG Inc
when you reloasa your vehicle:
A lot of personal data is regislefsd
when you me the hands-"ea system
Whan you release your vehlclo, Inltlal-
lze your data‘
If you inmanze u, the formal state will
never come bask again Ply much allerr
“on when inhlalizlng the data"
You can |nlliallze lhe following fish! in the
system
- phune book fish
- dlaled numbers and lecelvsd calls
0 speed dial
0 Bluetoolh plums data
0 soundly coda
Fcc ID: BABBTDD7A
n: u) : 20243-BT007A
MADE m JAPAN J
This davioe Gomplles with Part 15 affine
FCC Rules and RSS-Gfll if the [0
Rules Operation is tul‘éect to the following
two conditions: (1) this device may not
cause harmful interference. and (2) (h?!
devnce must accept any interference
rmived, lncludlng Interference mat may
cause undesnred operation
A CAUTION
compliance could void file user’ a authority
to opera-Le me equipment
This transmitter must not be (Jo-located or
operated In oonjunotion with any other
antenna or transmitter.
This equipment complies with FCC/IO
radiation exposure limits set forth
for uncontrolled equipment and meets
the FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OETGS
and RSS-102 of the IC radio requency
(RF) Exposure rules.This equipment has
very low levels of RF energy that it
deemed to comply without maximum
permissive exposure evaluation (MPE).
But it is desirable that it should be
installed and operated with at least 20cm
and more between the radiator and
person's body (excluding extremities:
hands, wrists, leet and legs).
_.J_
(a) Entering a Bluetooth phone
To use the hands—free system, you
need to enter your phone Into the sys-
tem. Once you have registered it, you
can make a hands-free callt
1. Push the "INFO" button to dlsplay
(he “lnlormatlon” screen.
2. Touch the “Telephone switch to dla~
play "Telephone' screen.
You can also push the 6 button of the
steering wheel to display this screen when
the vehicle is stopped
_T_
5 Telephone
Album ithtn'vmaiwl
3. Touch the "Settings" awltch to dls—
play “Gaming!" screen.
27mm
4. Touch the “Elustoom” switch to dls~
play (he “Blustooth Settings" screen,
178
_ > ___ 27F1E4
4 Touch the "Hamster“ switch to con-
neck your cellular phone In the sys—
lemu
m1 115
a. When this screen ls displayed, input
tho Passkey displayed on file straen
into the phone.
For the cpemfinn of the phone, see the
manual that comes with you. oenmar
phone,
if you Want to cancel il. much "Cancel".
27mm;
7. when the connection is compietsd,
this screen Is displayed.
You do no'i nead to 9mm the phane in
case cf using the same one
When (his scieen is displayed, fallow (he
guidance on the screen to in] again;
- Connectlng a Biueloolh phone
(a) automatically
When you register your phone, auto
connection will be turned on. Always
Get ii to this mode and have (he Blus~
tooth phone: In a condition where con-
necHon can be ssubiishui.
Each iime you much the "Auto Connsci'
$Witch. aulc connection will be switched
on D! fo,
179
’
f _i__
(b) manually
When the auic connaclIon iciied or
turned on you have to connect Blus- "Elan minim},
tooth manually. ' ’ ‘ "
27P159
when the connection is ccmpleicd, this
screen is d!splayed
Now you can use the Eluelooth phone ,
When the "ACC" or “IQ-ON" mode is
enabled, the selected Bluetooth phone
will be automatlcally connetled and the
connenflon result is displayed. _—___27”_'EE.
This screen appears when «he aiueicoin Touch the named" swath me, hm
phqpe ls first confided after the “A00" Irig enebiea me Biucmom connection
or IG—ON mode ls enabled. on me pm“. i
180 i
° Reconnectlng (he Bluetoolh phone
If lhe Bluetoolh phone is disconnected
with a poor rsuepfion from the Blue-
tooth network thn "IE “ABC" or “IG~
ON" mode ls enabled, the system auto-
matlcslly recunnecle the Elueloolh
phone. In this case, (he counsellan
result Is not displayed.
If the Bluelooth is disconnected on pur-
pose such as you iumed your cellular
phone off, ihis does not happen Racon-
necl ii by the following methods
a Select the Biueiooih phone agaln
4 Enter (he Eluelouth phone.
_l_u
(b) Calling on the Bluetooth phone
After you enter the Blueloolh phone,
you can call by using hands-free sys-
tem. Vou can call uslng the 7 methods
described below.
(i) By dlal
You can call by inputting the telephone
number.
This cannot be operated while yau are
driving,
Touch the dashed key I0 input the isle-
phone number.
WT
Each time you much “4", an lnpufled
digl! ls deleted
When you much “ , the number you
called last is inputted
Touch n or push the 6 button of the
steering wheel.
151
‘>
(ii) By phone book
Von can can by phone book data whlch
ls transferred from your cellular phone.
The system has one phone book You
c‘an reglster up to 1000 numbersl
Thls cannot be operated while ycu are
diivlng.
Touch lhs desired key In input the tele-
phone number.
1. Touch the “Phone Book" switch to
display “Phone Book" screen.
182
2. Select the desired number lrom lhe
Ilst.
27P|94_
L_‘.
Touch N" 0. push the 6 button of (ha
steering wheel,
(iii) Ey dialed numbers
You can call by dialed number. The
system memorizes up to 5 dialed num-
bers. If it is over 5, the oldest number
is deleted.
This cannot be operated while yau are
driving.
1. Touch ihe “Call Log” switch to dis-
play “outgoing Calls“ screen.
27? l 97
. When you call by phone book, the
name (if registered) re displayed.
' When you call the same number can-
iinuousiy, only the newest number is
registered
2. Select the desired number from the
list.
Touch "I" or push the 6 button of the
steering wheel
183
ii:
(Iv) By received calls
You can call by received calls‘ when
a call ls received, the system memo-
rizes up to 5 numbers. 11 It [5 over 5,
the oldest number Is deleted.
This cannot be operated while you are
dvrving.
1. Touch the “Call Log” switch to dis-
play‘
184
21P|9€ 2mm
2A Touch the “incoming Calls" switch to 9 When a (slephone number rsgifilered in
display “Incoming Bills" screen, the phone book is received, the name
and the number are displayed.
l Hecsivad calls which you did ND! an-
swat are alsn memorlzad in the system
and “Abs.” Is displayed on the left
side Of the number
5 unnoticed lehphone number such as a
publlc telephone is no! memorlzed in
the system.
a. Select the desired number from the
fish
Tuuch or push the 6 bullen of the
steering wheel
' An international phone call may not be
made dependlng en the cellular phone
which you have.
J_
(v) By speed dlal
Yo}: can cell by registered telephone
number which you selected from a
phone book, aleled numbers and re
celvsd calls. (See page 192 var regis-
tering the speed dIaL)
1. Touch the "Speed Dial" swltch lo
dlspley “Speed Dlal" screen
”T
2. Touch the deslreu number to call.
ch can change the page by touch-
lng “Speed Dlal 2" or “Speed Dial
a".
When you push me lelephene human while
yau ale driving, the screen above Ap‘
peers Touch the desired name io can.
(The telephone number is not displayed.)
185
(vi) By voice racognklnn
Example: Cal! Charllze
J-
27P208
You can call by glvlng a command. (Fur
the operation and command of voice
recognition, see “speech Command
System" on page 236 and “Help screen”
on pigs an)
a Dialing by name
You can call by giving a voice tag rag~
[stared In the phone book For setting
the voice recognition, see “Setting the
voice recognition" on page 211.
186
You: Push the laik switch,
System: ‘Afler the beep, please say the
nama.‘
You: “Cherlize.”
System: "Charllze chosen, when ready‘
please briefly push lhe talk
swltch or push me ofi~hook
switch to dial."
You: Push the talk switch.
System: "After the beep, please say
‘Dia|","
You: "Dial."
system: "DIaIIng the name"
Now you ‘ean call chamze
_L
Cancelling the voice recognition 0 Dialing by phone number
The voice recognition wlii be cancelled You can call by giving a desired num-
when you do the following. her.
27mm
“Next" is displayed when mulllple snlries
are found for a searched name.
Up lo 6 entries can be displayed including
the first searched one.
Do the following to change the entry to
the next one
D Tnuch the ”Next" swllch.
0 Push the talk switch to say "Next Can-
didaie'.
Calling without the voice recognition.
Aflei lhe entry number is displayed, you
can also call by pushing the telephone
button a! touching the ”Dial“ switch.
- Keep on pushing the lslk swlleh.
@ Push the 6 hulmn at lhe staeilng
wheel.
. Touch the "Cancel' switch (Except for
racognizing ms command)
. say “Cancel".
27on5
187
You:
System:
You:
Sysiem:
You:
System:
You:
System:
Push (he talk switch.
"After the beep, please say the
number,"
”8 1 238 7“
‘When ready,» please hyiefly
push the talk switch or push
the off—hook swlich to dial"
Push the talk switch.
"After the beep, please continue
to add numbers or say "Disii'."
"Dial."
'Dlal|r|g the number,’
NOW you can call 812387
188
_L
- sendlng 3: ions
Van can send a ions by giving a de-
sired number.
Push the talk switch
“Say numbew, pound. 01 star.”
"1234."
“1234." “Push the Ialk switch "
Push the talk switch
“Send? Say Vas or No,"
"Yssf
"Sanding."
can send the tone.
7“
(Vll) By POI call
You can call by xoucmng when n
is displayed on the screen from Naviga-
tion system (See the separate “Navi-
gation system Owner’s Manual" ior de-
tails)
_J__
(0) Receiving on the Bluetooth To edlusl the volume of received cell:
phone Touch “—-” or “4," or use the volume
switch of the steering wheel,
On (he iniemaiional phone call, the char
party's name may not be dlsplaysd cel-
lecily depending on lhe cellular phone
which you have.
When a call is received, this screen is
displayed with a suurld. Tauch “-”
or push the 6 button of me steering
wheel to talk on me phone.
To hang up the phone:
Touch “E" or push (he a button of
the eleerlng wheel again.
Ta refuse to receive the call:
and hold it
(d)Taiking on the Biuetooth
phone
While you are talking on this phone,
this screen is disulayed. You can do
the operations below on the screen.
To adluel the volume of the mile: party's
voice:
Touch “.” OF "f" Or use the vclume
ewlleh of the steering wheel
To hang up the phone;
Tuuch the “E” swllnh or push the
63 human of (he stealing wheel
To mule your voice:
Touch lhe "Mule" switch
189
To input a Key:
Touch the "0-9“ switch,
To transfer the call
Touch the "Transfer Call" Swiich,
You cannot change from hands—free call
to cellular phone call while you are dKiV<
ing
When you change from caiiulay phone call
to hands—flee caii‘ (he hands—free saraan
will be displayed and you can upstate it
cm the sateen.
Transfatring method and behavio! are dllv
i‘ersnt depending on the cellular phone
which you have.
Fm the operation of the phone, see the
manual that comes with ynur csiiular
phone
190
Touch the desired number to input the
key
To hang up the phone:
Touch WE Ur push ihe is button of
the sieering wheel
This cannot be operated while you are
drtvtng
u "i“
2797210
if the continuous (one signal is regis-
tered In a phone book. this screen ap-
pears‘ (i! no! raglsiered, “Send" and
“Exit” are not displayed.)
Comirm the number displayed on the
screen and touch “Send“. The number
before marked sign will be sent.
When you touch "Exit", this function Will
be finished and noymal (one screen 59’
Dears.
To hang up the phone:
Tuuch “ " or push the {5 button of
(he stealing wheel.
The conilnuous (one signal is the marked
sign (p or w) and the numbet tottowtng
teiephnna number (ex 056133p0123vv#1:)
You can do this operation when you went
to upsraie an answering machine D! use a
teiephone service In bank for example.
You can register the phone number and
the code number In the phone book,
_L
6 Sending a lone by the speed tune
You can send a lone by the speed tone.
(For registering the spesd tone, see
“Heglsiering the speed tone" an page
195.)
27F21|
1. Touch the “Speed Tana” switch.
2. Touch the desired swnch to send a
(one.
191
G) (a) Registering the speed dial
You can register the desired telephone
number from phone Izaak, dlaled num-
bers and received calls. Up to 17
speed dial numbers can he reglstered.
The 6th entry is the speed dial for redlal-
ing
(9) Changing the settings of the
Bluetooth phone
Von can change me settings of the
phone.
Touch the “Settings" switch to display
“settings" screen.
27P2E
1.Touch the "speed Dial” switch to
display the “Speed Dlal Settings"
scream
192
“T—
z7F216
— ~~~~~~~~~~ ——» I
___..,. 2. Youch the “Register" swllch of 3. sales! the data you want (a register. 44 Touch the desired telephone number. J Y
“Speed Dial".
793
., _ ~- , - "’ ““““ 0 Deleting the speed dial individually
Von can delete “01” ~ “17" of the
speed dial Individually.
If you delata them all at once, all of 17
numbers are deleted,
27pm]
5. Touch the switch you want to regiu- 6. If you select a switch you registered
ter in. before, this screen is displayed.
The latest dialed number [3 registered in Touch the “Yes" switch it you want to
the am item (speed redlal). overwrite it.
1. Touch the “Delete" swltch 0' “Speed
Dial".
194
‘ ' " ' “ “' e Deleting all of ms speed dial
2. Touch the switch you want 10 de'ete. 3. Tuuch the “Yes” switch. -—_.A..~._ —"
1. Youeh the ”Delete All" swltch of
“Speed Dial”.
195
*T_
2. Touch the “Yes" swilch.
196
_L,
(b) Registering the speed tone
You can regisier the dealred lone num-
ber. Up to 5 speed lone numbers can
he rsqlsterad.
27P226
1, Touch (he "Regisler" switch 01
“Speed Tone’n
MT“,
2. Use the software keyboard [0 input
ths name.
‘ r E Te‘ehaiiis'itiumber "
__ 27F229
_ z1P230
3. input the number and touch “0K",
4. Touch the desired switch you want
to register in‘
Ar.
5. If you select a switch you registered in
before, this screen "5 displayed
Touch the “Yes” swflcl‘l if you want
to overwrite it,
197
9 Editing the speed tuna‘
You can edit the speed (one.
was
. Touch the IWIMh you Wank to ed". 3. Use the SDflWHre keyboard to Input
the name.
27P331
1. Touch the “Edi!" switch of “Speed
Tone".
198
4. Input
the number and touch “OK”<
e Deleting the speed tone lndivldually
You can delete “1” to “5” of the speed
tone.
If you delete them all at once, all of 6
numbers are deleted
1» Touch the "Deléle" swllch of “Speed
Tune”.
A mswmc
ma . ’
2 Touch lhe switch you Want to delete,
199
3 Touch the “Yes” swltch.
200
mL
1.Toucl'| the “Delete All"
“Speed Tone".
switch 0!
2. Touch the “Yes” Switch
27mm 7
(ll) Setting the volume
1. Touch the "Volume" switch to dis-
play the “Vomme Selling” screen.
2. Touch the “—” or “f" switch to ad-
just the “voles Volume" or “Ring
Volume“.
Voice Volume adjusting the (like!
party's value;
Rlng Volume . vedhtallng the ring vclume
TN,
0 Automatic volume settings for high
speed
You can set the volume one step up
when the vehicle speed is over 80
mm. (When n Is under 70 km/h, pre-
vious volume is back)
Each time you touch the "Adaptive Volume
Cuntrol' switch, YOU can SWNCh on or off
201
zfi —~L
o lnltlalizing the sacungs ~-—~-—*-——~—-—'— (m) Semnglhe screen
Vou can initialize the aeflinge.
v Touch the “Yes" swltch.
27P24v
""'”'_' “k‘ '“_—‘"’_"'"'_'*‘ 1‘ Touch the "Screen” swllch to display
Touch the “Delaul!” swltch. the "screen Sailings" scream
202
2.Do the detailed settings of the
screen and touch “0K".
__L
9 Receiving Call ulsplay 9 Auto answer
Vou can select the method of the re~ When a call ls received, the display
ceivlng can display. automatically changes to the talking
screen and you can start to tall: on the
phone (without touching any swltch) al~
ter the preset time.
Touch the "Full“ or “Icon" switch.
Full made H when a call is received,
the hands—free screen is
displayed and you can Touch the "on" switch of “Auto An-
operate it on the screen. “war" m“ "-" "f “V' switch to adlust
the waiting time 07 auto answer within
Icon mode The message is , _ eo sewn“
displayed on the upper
side at“ the screen You
nan only nparats the
steevlng switch.
203
7,
9 The Eiuetooth connection status at
starinp
Touch the “ON” Er “OFF" switch 09
Show Bluetooth connection status at
startup.
27P1E_9
When you turn the “POWER” SWI ch to
"ACC" or “IE -0N" and the Eluetooth I:
automatically connafiied. the connection
check is displayed.
204
t Initializing {ha settings
You can initialize the settings.
Touch the “Default" switch.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Subject                         : 
Create Date                     : 2006:03:23 14:47:27Z
Modify Date                     : 2006:04:10 11:01:21+09:00
Page Count                      : 31
Author                          : 
Producer                        : 
Keywords                        : 
Creation Date                   : 2006:03:23 14:47:27Z
Mod Date                        : 2006:04:10 11:01:21+09:00
Metadata Date                   : 2006:04:10 11:01:21+09:00
Creator                         : 
Title                           : 
Description                     : 

EXIF Metadata provided by EXIF.tools