DENSO TEN FT0017A CD Receiver with Bluetooth and Display User Manual CAMRY GE 33863E

Fujitsu Ten Limited CD Receiver with Bluetooth and Display CAMRY GE 33863E

UserManual.wiki >

FT0017A User Manual

08& 61116;User Manual (FT0017A)

3-3. Using the Display Audio system3Interior features■CertificationThis device complies with part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) This device may not cause harmful interfer-ence, and (2) this device must accept any interference received, includinginterference that may cause undesired operation.FCC WARNING:Changes or modifications not expressly approved by the party responsiblefor compliance could void the user’s authority to operate the equipment.CAUTION:Radio Frequency Radiation ExposureThis equipment complies with FCC radiation exposure limits set forth foruncontrolled equipment and meets the FCC radio frequency (RF) ExposureGuidelines in Supplement C to OET65. This equipment has very low levelsof RF energy that it deemed to comply without maximum permissive expo-sure evaluation (MPE). But it is desirable that it should be installed and oper-ated with at least 20 cm and more between the radiator and person’s body(excluding extremities: hands, wrists, feet and ankles).Co-location:This transmitter must not be co-located or operated in conjunction with anyother antenna or transmitter.

3803-3. Using the Display Audio systemCAUTION■While drivingDo not use the cellular phone or connect the Bluetooth® system.NOTICE■When leaving the vehicleDo not leave your cellular phone in the vehicle. The inside of the vehicle maybecome hot, causing damage to the phone.

3813-3. Using the Display Audio system3Interior featuresUsing the Bluetooth® phoneDevice nameBluetooth® connection statusMake a callTo display the screen shown above, press on the steeringwheel or .

3823-3. Using the Display Audio systemRegistering a Bluetooth® phoneTo use the hands-free system, you must register a Bluetooth® phonein the system. You can register up to 5 phones in the system.Display the “Telephone” screen. (→P. 381)Touch “Yes”.Input the passcode displayed onthe screen into your phone.For the operation of the phone,see the manual that comes withyour cellular phone.Passcodes are not required forSSP (Secure Simple Pairing)compatible Bluetooth® devices.Depending on the phone, youmay need to select “Yes” to regis-ter, or “No” to cancel on your cel-lular phone.If you want to cancel it, select“Cancel”.If a completion message is dis-played, registration is complete.If an error message is displayed,follow the guidance on the screento try again.STEP1STEP2STEP3

3833-3. Using the Display Audio system3Interior featuresSelecting the Bluetooth® phoneIf multiple Bluetooth® devices are registered, follow the procedurebelow to select the Bluetooth® device to be used. You may only useone device at a time.Display the “Telephone” screen. (→P. 381)Touch “Connect telephone”.Touch the device to connect.“Add new”: Registering aBluetooth® device. (→P. 409)The selection indicator isdisplayed on left side of theselected device name.The Bluetooth® mark is displayedwhen you connected the device.STEP1STEP2STEP3

3843-3. Using the Display Audio systemConnecting a Bluetooth® phoneThere are two connecting methods available-automatic and manual.AutomaticWhen you register your phone, auto connection will be activated.Always set it to this mode and leave the Bluetooth® phone in a placewhere connection can be established.Vehicles without a smart entry & start system:When the engine switch is turned to the “ACC” or “ON” position, thesystem will search for a nearby cellular phone you have registered.Vehicles with a smart entry & start system:When the “ENGINE START STOP” switch is turned to ACCESSORYor IGNITION ON mode, the system will search for a nearby cellularphone you have registered.Next, the system automatically connects with the most recent of thephones connected to in the past. Then, the connection result is dis-played.

3853-3. Using the Display Audio system3Interior featuresManualWhen the auto connection has failed or “Bluetooth* power” is turnedoff, you must connect Bluetooth® manually.*: Bluetooth is a registered trademark of Bluetooth SIG. Inc.Display the “Telephone” screen. (→P. 381)Touch “Connect telephone”.Touch the device to connect.A message is shown if connectionhas been successful.If connection fails, a message willbe displayed and connection willbe re-attempted.STEP1STEP2STEP3

3863-3. Using the Display Audio systemMaking a callOnce the Bluetooth® phone is registered, you can make a call usingthe following procedure:■DialingDisplay the “Telephone” screen. (→P. 381)Input the phone number.To delete the inputted phonenumber, touch .For the first digit, you can enter“+” by touching “∗” for a while.Press on the steering wheel or touch .■Reconnecting to the Bluetooth® phoneVehicles without a smart entry & start system:If the system cannot connect due to poor signal strength with the engineswitch in the “ACC” or “ON” position, the system will automatically attempt toreconnect.Vehicles with a smart entry & start system:If the system cannot connect due to poor signal strength with the “ENGINESTART STOP” switch in ACCESSORY or IGNITION ON mode, the systemwill automatically attempt to reconnect.If the phone is turned off, the system will not attempt to reconnect. In thiscase, connection must be made manually, or the phone must be re-selected.■Connecting the phone while Bluetooth® audio is playing●Bluetooth® audio will stop temporarily.●It may take time to connect.STEP1STEP2STEP3

3873-3. Using the Display Audio system3Interior features■Dialing from the phonebookYou can dial a number from the phonebook data imported fromyour cellular phone. The system has one phonebook for each tele-phone. Up to 1000 entries may be stored in each phonebook. (→P. 398) Display the “Telephone” screen. (→P. 381)Touch “Contacts” on the “Telephone” screen.Choose the desired data to callfrom the list.If the phonebook is empty, a mes-sage will be displayed. (→P. 388)Choose the number and thenpress on the steering wheelor touch .STEP1STEP2STEP3STEP4

3883-3. Using the Display Audio system●When the phonebook is emptyYou can transfer the phone numbers in your Bluetooth® phone tothe system.Operation methods differ between PBAP compatible and PBAPincompatible Bluetooth® phones. If your cellular phone does notsupport either PBAP or OPP service, you cannot transfer contacts.Touch “Contacts” on the “Telephone” screen.If the phonebook is empty, amessage will be displayed.For PBAP compatible Bluetooth® phoneTouch “Yes” if you want to transfer new contacts from a cellu-lar phone.Touch “No” if you want to cancel transferring the contacts.For PBAP incompatible and OPP compatible Bluetooth® phoneTouch “Transfer” if you want to transfer new contacts from acellular phone.Touch “Cancel” if you want to cancel transferring the contacts.You need to operate your phone to transfer new contacts.STEP1STEP2STEP3STEP3

3893-3. Using the Display Audio system3Interior features■Calling using speed dialYou can make a call using numbers registered from the phone-book.Display the “Telephone” screen. (→P. 381)Touch “Speed dials” on the “Telephone” screen.Select the desired tab andchoose the desired number tomake a call.■Dialing from historyYou can call using the call history which has the 4 functions below.“All”: all the calls below which were memorized“Missed”: calls which you missed“Incoming”: calls which you received“Outgoing”: calls which you calledDisplay the “Telephone” screen. (→P. 381)Touch “Call history” on the “Telephone” screen.Select the desired tab andchoose the desired data from thelist.STEP1STEP2STEP3STEP1STEP2STEP3

3903-3. Using the Display Audio systemPress on the steering wheelor touch .STEP4■Call history list●If you make a call to or receive a call from a number registered in thephonebook, the name is displayed in the call history.●If you make multiple calls to the same number, only the last call made isdisplayed in the call history.■When drivingThe functions “Dialing”, “Dialing from the phonebook”, and “Dialing fromhistory” (only the 6th page of “All” tab) are unavailable.■International callsYou may not be able to make international calls, depending on the mobilephone in use.■Calling by using the latest call history itemPress on the steering wheel to display the “Telephone” screen.Press on the steering wheel to display the “Call history” screen.Press on the steering wheel to select the latest history item.Press on the steering wheel or touch to call the latest his-tory item.STEP1STEP2STEP3STEP4

3913-3. Using the Display Audio system3Interior featuresReceiving a callWhen a call is received, the following screen is displayed togetherwith a sound.To answer the phone:• Press on the steeringwheel.•Touch .■To refuse a callPress on the steering wheel or touch .■To adjust the incoming call volumeTouch “-” or “+”. You can also adjust the volume using the steeringswitches or volume knob.■International callsReceived international calls may not be displayed correctly depending onthe cellular phone in use.

3923-3. Using the Display Audio systemSpeaking on the phoneThe following screen is displayed when speaking on the phone.■To adjust the incoming call volumeTouch “-” or “+”. You can also adjust the volume using the steeringswitches or the volume knob.■To prevent the other party from hearing your voiceTouch “Mute”.■Inputting tonesWhen using phone services such as an answering service or abank, you can store phone numbers and code numbers in thephonebook.Touch “0-9”.Input the number.STEP1STEP2

3933-3. Using the Display Audio system3Interior featuresIf repeated tone symbols* arestored in the phone book, “Send”and “Exit” are displayed on theright side of the screen.*: Repeated tone symbols are sym-bols or numbers displayed as p orw, that come after the phonenumber. (e.g. 056133w0123p#1∗)Confirm the number displayed on the screen, and touch“Send”.If you touch “Exit”, this function will end.■To transfer a callTouch “Handset Mode” to change from Hands-free call to cellularphone call.Touch “Handsfree Mode” to change from cellular phone call toHands-free call.■To hang upPress on the steering wheel or touch .STEP3STEP4

3943-3. Using the Display Audio system■Call waitingWhen a call is interrupted by a third party while talking, the incom-ing call message will be displayed.To talk with the other party:• Press on the steeringwheel.•Touch .To refuse the call:• Press on the steeringwheel.•Touch .Every time you press on the steering wheel or touch dur-ing call waiting, you will be switched to the other party.■Transferring calls●It is not possible to transfer from hands-free to the cellular phone whiledriving.●If you transfer from the cellular phone to hands-free, the hands-freescreen will be displayed, and you can operate the system using thescreen.●Transfer method and operate may vary according to the cellular phoneused.●For operation of the cellular phone in use, see the phone’s manual.■Call waiting operationCall waiting operation may differ depending on your phone company andcellular phone.

3953-3. Using the Display Audio system3Interior featuresSetting the hands-free systemYou can set the hands-free system to your desired settings.Setting the soundPhonebook settingsTo display the screen shown above, press “SETUP”, and touch“Telephone” on the “Setup” screen.

3963-3. Using the Display Audio systemSetting the soundDisplay the “Telephone settings” screen. (→P. 395)Touch “Sound settings” on the “Telephone settings” screen.Changes the speaker volume(→P. 396)Changes the ring tone volume(→P. 396)Changes the ring tone (→P. 397)Restore default settings■Setting the volumeTouch “Call volume” or “Ring tone volume” on the “Soundsettings” screen.Touch “-” or “+” to lower or raisethe volume, and then “OK”.When you complete all settings, touch “OK”.STEP1STEP2STEP3STEP1STEP2STEP3

3973-3. Using the Display Audio system3Interior features■Setting the ring toneTouch “Ring tone” on the “Sound settings” screen.Touch “Tone 1”, “Tone 2” or“Tone 3” to change the ring tone,and then “OK”.When you complete all settings, touch “OK”.STEP1STEP2■To return to the default volume settingsTouch “Default”, and then “Yes”.STEP3

3983-3. Using the Display Audio systemPhonebook settingsThe phonebook manages a maximum of 5 phones in total. The datafor 1000 contacts (up to 3 numbers per contact) can be registered ineach phonebook.Managing the contactsManaging the speed dialsDeleting the call historyTo display the screen above, follow the steps below.Display the “Telephone settings” screen. (→P. 395)Touch “Phonebook” on the “Telephone settings” screen.STEP1STEP2

3993-3. Using the Display Audio system3Interior features■Managing the contacts●Transferring a phone numberYou can transfer the phone numbers in your Bluetooth phone to thesystem. Operation methods differ between PBAP compatible andPBAP incompatible Bluetooth phones. If your cellular phone doesnot support either PBAP or OPP services, you cannot transfer con-tacts.Display the “Phonebook settings” screen. (→P. 398)Touch “Manage contacts” on the “Phonebook settings”screen.Touch “Transfer contacts”.For PBAP compatible Bluetooth phonesAutomatic phonebookdownload on/offThe phonebook data can be auto-matically transferred.Depending on the cellular phone,call history will be also trans-ferred.Update phonebookThe phonebook data can beupdated.Restore default settingsSTEP1STEP2STEP3STEP4

4003-3. Using the Display Audio systemFor PBAP incompatible Bluetooth phonesReplace contactsThe phonebook data can bereplaced.Add contactsThe phonebook can be added.●Deleting the phonebook dataDisplay the “Phonebook settings” screen. (→P. 398)Touch “Manage contacts” on the “Phonebook settings”screen.Touch “Delete contacts”.If your phone supports PBAP ser-vice, “Automatic phonebookdownload” setting needs to be setto “Off”. (→P. 399)Choose the data to delete.To delete all data, touch “Alldelete”.A confirmation message will be displayed. If everything is cor-rect, touch “Yes”.STEP4STEP1STEP2STEP3STEP4STEP5

4013-3. Using the Display Audio system3Interior features■Phonebook dataPhonebook data is managed for every registered phone. When anotherphone is connecting, you cannot read the registered data.■Setting the phonebook in a different way (To display the “Contacts”screen)Display the “Telephone” screen. (→P. 381)Touch “Contacts” on the “Telephone” screen.Touch “Options” on the “Contacts” screen.Touch “Manage contacts” on the “Phonebook settings” screen.■When transferring a phone numberTransfer the phone number while engine is running.If your cellular phone is OPP or PBAP compatible, you may need to input“1234” by your cellular phone for OBEX certification.■When you have selected “Update phonebook” to transfer the phonenumber●If your cellular phone does not support PBAP service, you cannot usethis function.●If your phone supports PBAP service, you can transfer the phonebookdata without operating your phone.■When you have selected “Replace contacts” or “Add contacts” totransfer the phone numberIf your cellular phone does not support OPP service, you cannot use thesefunctions. You can transfer the phonebook data only by operating yourphone.■Transferring the phone number in a different way (To display the“Contact transfer method” screen)Display the “Telephone” screen. (→P. 381)Touch “Contacts” on the “Telephone” screen.Touch “Transfer” on the “Contacts” screen.■Transferring the phone number while Bluetooth audio is playingBluetooth audio will disconnect. It will reconnect automatically when datatransfer finishes. It will not be reconnected depending on the phone you areusing.STEP1STEP2STEP3STEP4STEP1STEP2STEP3

4023-3. Using the Display Audio system■Managing the speed dials●Registering the speed dial from contactsYou can register the desired phone number from phonebook. Up to18 numbers per phone can be registered.Display the “Phonebook settings” screen. (→P. 398)Touch “Manage speed dials” on the “Phonebook settings”screen.Touch “New speed dial fromcontacts”.■Deleting the phonebook data in a different wayDisplay the “Telephone” screen. (→P. 381)Touch “Contacts” on the “Telephone” screen.Choose the desired data from the list.Touch “Options” on the “Contact” screen.Touch “Delete” on the “Contact data” screen.A confirmation message will be displayed. If everything is correct,touch “Yes”.If your phone supports PBAP service, “Automatic phonebook download” set-ting needs to be set to “Off”. (→P. 399)When you delete a Bluetooth phone, the phonebook data will be deleted atthe same time.STEP1STEP2STEP3STEP4STEP5STEP6STEP1STEP2STEP3

4033-3. Using the Display Audio system3Interior featuresChoose the data to register.Touch the desired phone num-ber.Touch the switch you want toregister the number in.If you select a switch you registered before, a confirmationmessage will be displayed. If you want to replace it, touch“Yes”.STEP4STEP5STEP6STEP7

4043-3. Using the Display Audio system●Registering the speed dial from call historyDisplay the “Phonebook settings” screen. (→P. 398)Touch “Manage speed dials” on the “Phonebook settings”screen.Touch “New speed dial from callHistory”.Choose the data to register.Touch the switch you want toregister the number in.If you select a switch you registered before, a confirmationmessage will be displayed. If you want to replace it, touch“Yes”.STEP1STEP2STEP3STEP4STEP5STEP6

4053-3. Using the Display Audio system3Interior features●Deleting the speed dialDisplay the “Phonebook settings” screen. (→P. 398)Touch “Manage speed dials” on the “Phonebook settings”screen.Touch “Delete speed dials” on the “Speed dials” screen.Choose the data to delete.To delete all data, touch “Alldelete”.A confirmation message will be displayed. If everything is cor-rect, touch “Yes”.STEP1STEP2STEP3STEP4■Setting the speed dials in a different way (From “Speed dial” screen)Display the “Telephone” screen. (→P. 381)Touch “Speed dials” on the “Telephone” screen.Touch “Options” on the “Speed dial” screen.■Setting the speed dials in a different way (From “Contacts” screen)Display the “Telephone” screen. (→P. 381)Touch “Contacts” on the “Telephone” screen.Touch “Options” on the “Contacts” screen.Touch “Manage speed dials” on the “Phonebook settings” screen.STEP5STEP1STEP2STEP3STEP1STEP2STEP3STEP4

4063-3. Using the Display Audio system■Registering the speed dial in a different way (From “Speed dial”screen)Display the “Telephone” screen. (→P. 381)Touch “Speed dials” on the “Telephone” screen.Touch “(add new)” on the “Speed dial” screen.Touch “Contacts” or “History” to set new speed dial.Touch “Cancel” to cancel it.Choose the desired data from the list.Touch the desired phone number.Follow the steps “Registering the speed dial from contacts” from“STEP6” (→P. 402) or “Registering the speed dial from call history”from “STEP5”. (→P. 404)■Registering the speed dial in a different way (From “Contact” screen)Display the “Telephone” screen. (→P. 381)Touch “Contacts” on the “Telephone” screen.Choose the desired data from the list.Touch “Options” on the “Contact” screen.Touch “Set speed dial” on the “Contact data” screen.Touch the desired telephone number.Follow the steps “Registering the speed dial from contacts” from“STEP6” (→P. 402) or “Registering the speed dial from call history”from “STEP5”. (→P. 404)■Registering the speed dial in a different way (From “Call history”screen)Display the “Telephone” screen. (→P. 381)Touch “Call history” on the “Telephone” screen.Choose the desired data from the list.Touch “Add speed dial” on the “Call history” screen.Follow the steps “Registering the speed dial from contacts” from“STEP6” (→P. 402) or “Registering the speed dial from call history”from “STEP5”. (→P. 404)STEP1STEP2STEP3STEP4STEP5STEP6STEP7STEP1STEP2STEP3STEP4STEP5STEP6STEP7STEP1STEP2STEP3STEP4STEP5

4073-3. Using the Display Audio system3Interior features■Deleting the call historyDisplay the “Phonebook settings” screen. (→P. 398)Touch “Delete call history” on the “Phonebook settings”screen.If your phone supports PBAP service, the “Automatic phonebookdownload” setting needs to be set to “Off”. (→P. 399)Choose the desired history todelete.Choose the data to delete.To delete all data, touch “Alldelete”.A confirmation message will be displayed. If everything is cor-rect, touch “Yes”.STEP1STEP2STEP3STEP4■Deleting call history in a different wayDisplay the “Telephone” screen. (→P. 381)Touch “Call history” on the “Telephone” screen.Touch “Delete” on the “Call history” screen.Follow the steps “Deleting the call history” from “STEP4”. (→P. 407)STEP5STEP1STEP2STEP3STEP4

4083-3. Using the Display Audio systemBluetooth® settingsYou can set the Bluetooth system to your desired settings.Registered devices settingsConnecting telephoneConnecting audio playerDetailed Bluetooth settingsTo display the screen shown above, press “SETUP”, and touch“Bluetooth*” on the “Setup” screen.*: Bluetooth is a registered trademark of Bluetooth SIG. Inc.

4093-3. Using the Display Audio system3Interior featuresRegistered devices settings■Registering a Bluetooth deviceBluetooth devices compatible with phones (HFP) and portable audioplayers (AVP) can be registered simultaneously. You can register upto 5 Bluetooth devices.Display the “Bluetooth* Settings” screen. (→P. 408)Touch “Registered devices” on the “Bluetooth* Settings”screen.Touch “Add new”.*: Bluetooth is a registered trademark of Bluetooth SIG. Inc.STEP1STEP2STEP3

4103-3. Using the Display Audio systemWhen this screen is displayed,input the passcode displayed onthe screen into your Bluetoothdevice.For the operation of theBluetooth® device, see themanual that comes with yourBluetooth® device.Passcodes are not required forSSP (Secure Simple Pairing)compatible Bluetooth® devices.Depending on the phone, youmay need to select “Yes” toregister, or “No” to cancel on yourcellular phone.If you want to cancel it, touch“Cancel”. If a completion message isdisplayed, registration iscomplete. If an error message is displayed,follow the guidance on the screento try again.■Removing a Bluetooth deviceDisplay the “Bluetooth* Settings” screen. (→P. 408)Touch “Registered devices” on the “Bluetooth* Settings”screen.*: Bluetooth is a registered trademark of Bluetooth SIG. Inc.STEP4STEP1STEP2

4113-3. Using the Display Audio system3Interior featuresTouch “Remove”.Touch the device to remove.A confirmation message will be displayed, touch “Yes” toremove the device.■Displaying a Bluetooth device detailsYou can confirm and change the device details.Display the “Bluetooth* Settings” screen. (→P. 408)Touch “Registered devices” on the “Bluetooth* Settings”screen.Touch “Details”.*: Bluetooth is a registered trademark of Bluetooth SIG. Inc.STEP3STEP4STEP5STEP1STEP2STEP3

4133-3. Using the Display Audio system3Interior features●Changing connection methodTouch “Connection method” on the “Device details” screen.Touch “From vehicle” or “Fromaudio player”.“From vehicle”: Connect theaudio system to the portableaudio player.“From audio player”: Connect theportable audio player to the audiosystem.Selecting the Bluetooth phoneIf multiple Bluetooth devices are registered, follow the procedurebelow to select the Bluetooth device to be used. You may only useone device at a time.Display the “Bluetooth* Settings” screen. (→P. 408)Touch “Connect telephone” on the “Bluetooth* Settings”screen.Touch the device to connect.“Add new”: Registering aBluetooth device. (→P. 409)The selection indicator is dis-played on left side of the selecteddevice name.The Bluetooth mark is displayedwhen you connected the device.*: Bluetooth is a registered trademark of Bluetooth SIG. Inc.STEP1STEP2STEP1STEP2STEP3

4143-3. Using the Display Audio systemSelecting the audio playerIf multiple Bluetooth devices are registered, follow the procedurebelow to select the Bluetooth device to be used. You may only useone device at a time.Display the “Bluetooth* Settings” screen. (→P. 408)Touch “Connect audio player” on the “Bluetooth* Settings”screen.Touch the device to connect.“Add new”: Registering aBluetooth device. (→P. 409)The selection indicator is dis-played on left side of the selecteddevice name.The Bluetooth mark is displayedwhen you connected the device.*: Bluetooth is a registered trademark of Bluetooth SIG. Inc.STEP1STEP2STEP3

4163-3. Using the Display Audio system■Editing the passcodeYou can change the passcode that you use to register yourBluetooth device in the system.Touch “Passcode” on the “Detailed Bluetooth* settings”screen.Input a passcode, and touch“OK”.*: Bluetooth is a registered trademark of Bluetooth SIG. Inc.STEP1STEP2