DENSO TEN FT0032A CD Receiver with Bluetooth and Display User Manual User s Manual FT0032A
Fujitsu Ten Limited CD Receiver with Bluetooth and Display User s Manual FT0032A
User's Manual (FT0032A)
79
1. SETUP OPERATION
5
SETUP
4. Bluetooth® SETTINGS
1Press the “SETUP” button.
2Touch “Bluetooth*”.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
3Touch the items to be set.
zPlease refer to the following pages for
each setting.
1Press the “SETUP” button.
2Touch “Bluetooth*” on the “Setup”
screen.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
3Touch “Registered devices”.
4This screen is displayed.
1Touch “Add new” to register your
Bluetooth® device to the system.
You can confirm and change the
Bluetooth® settings.
REGISTERED DEVICES
ADDING A NEW DEVICE
80
1. SETUP OPERATION
2When this screen is displayed, perform
a device discovery from your Bluetooth
device.
3Input the passcode displayed on the
screen into your Bluetooth device.
zPasscodes are not required for SSP
(Secure Simple Pairing) compatible
Bluetooth devices.
zIf you want to cancel it, touch “Cancel”.
zIf the Bluetooth® phone to be registered
has a Bluetooth® audio function, this can
be registered at the same time.
4When the connection is completed,
this screen is displayed.
zOnce you have registered it, the system
automatically connects to your Bluetooth®
device every time you start your vehicle.
1Touch “Remove” to remove your
Bluetooth® device from the system.
2Select the device to remove.
INFORMATION
●For details on device discovery for your
Bluetooth phone, refer to the Bluetooth
phone’s user’s guide.
●When you register your phone,
Bluetooth® audio will disconnect.
●If the Bluetooth® device has Bluetooth®
phone and Bluetooth® audio functions, it
will register phone and audio simulta-
neously. If an on-screen message
appears, follow the message and regis-
ter either or both Bluetooth® phone and/
or Bluetooth® audio functions.
REMOVING A Bluetooth®
DEVICE
INFORMATION
●When you delete a Bluetooth® phone,
the phonebook data will be deleted at
the same time.
81
1. SETUP OPERATION
5
SETUP
1Touch “Details” to display a device
detail.
2Select the device to display.
3This screen is displayed.
zTouch or to scroll the list.
zThe information displays the following
items.
■CHANGING THE CONNECTION
METHOD
1Touch “Connection method” and se-
lect “From vehicle” or “From audio
player”.
DISPLAYING DEVICE DETAILS Name Function
“Device name” The name in the
Bluetooth® network.
“Device
address”
The address peculiar to
the system. You cannot
change it. If the same
device name is dis-
played on the screen of
your device, refer to it.
“My telephone
number”
Telephone number of
your phone. The number
may not be displayed de-
pending on the phones.
“Profiles”
The profiles which sup-
port your Bluetooth® de-
vice. (For details of each
profile, see pages XX
and XX.)
“Connection
method”
The connection method
can be switched be-
tween “From vehicle”
and “From audio play-
er”.
The connection method can be select-
ed.
82
1. SETUP OPERATION
2Touch “OK”.
“From vehicle”: Connect the audio sys-
tem to the portable audio player.
“From audio player”: Connect the porta-
ble audio player to the audio system.
■INITIALIZING THE Bluetooth®
SETTINGS
1Touch “Default”.
1Press the “SETUP” button.
2Touch “Bluetooth*” on the “Setup”
screen.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
3Touch “Connect telephone”.
4Select the device to connect.
zThe Bluetooth® mark is displayed when
you connect the device.
zWhen you touch the device name with the
selection indicator and the Bluetooth®
mark, the device will be disconnected.
5When the connection is completed,
this screen is displayed.
1Press the “SETUP” button.
You can initialize the settings.
CONNECT TELEPHONE
In case you register more than one
Bluetooth® device, you need to choose
a favorite one.
You can select the Bluetooth® device
from a maximum of 5 numbers.
CONNECT AUDIO PLAYER
In case you register more than one
Bluetooth® device, you need to choose
a favorite one.
You can select the Bluetooth® device
from a maximum of 5 numbers.
83
1. SETUP OPERATION
5
SETUP
2Touch “Bluetooth*” on the “Setup”
screen.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
3Touch “Connect audio player”.
4Select the device to connect.
zThe Bluetooth® mark is displayed when
you connect the device.
zWhen you touch the device name with the
selection indicator and the Bluetooth®
mark, the device will be disconnected.
5When the connection is completed,
this screen is displayed.
1Press the “SETUP” button.
2Touch “Bluetooth*” on the “Setup”
screen.
3Touch “Detailed Bluetooth*
settings”.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
4This screen is displayed.
zTouch or to scroll the list.
DETAILED Bluetooth®
SETTINGS
84
1. SETUP OPERATION
zThe information displays the following
items.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
1Touch “Bluetooth* power”.
2Touch “On” or “Off”.
3Touch “OK”.
zIn case that the state of “Bluetooth*
power” is changed from “Off” into “On”,
Bluetooth® connection will begin.
zThe “Bluetooth* power” display shows
the following state.
When “Bluetooth* power” is “On”: The
Bluetooth® device is automatically con-
nected when you start your vehicle.
When “Bluetooth* power” is “Off”: The
Bluetooth® device is disconnected, and
the system will not connect to it next time.
zYou can select the state of “Bluetooth*
power”.
On: The automatic connection is turned
on.
Off: The automatic connection is turned
off.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
Name Function
“Bluetooth*
power”
It is available to set wheth-
er registered devices will
be connected automatical-
ly or not.
“Device
name”
The name in the
Bluetooth® network. You
cannot change it.
“Passcode”
The password when you
register your Bluetooth de-
vice in the system. You
can change it.
“Device
address”
The address peculiar to
the system. You can not
change it.
“Profiles”
The name of the profile
which your Bluetooth® de-
vice corresponds to. (For
details of each profile, see
pages XX and XX.)
“Display tele-
phone status”
The Bluetooth® phone
connection status. You
can turn it on and off.
“Display
audio player
status”
The portable audio player
connection status. You
can turn it on and off.
zIf you want to change the settings, refer
to the following pages.
zWhen you change the settings, touch
“OK” after changing them.
CHANGING THE Bluetooth®
POWER
85
1. SETUP OPERATION
5
SETUP
1Touch “Passcode”.
2Input a passcode and touch “OK”.
1Touch “Display telephone status”.
2Touch “On” or “Off”.
3Touch “OK”.
zWhen you start your vehicle and the
Bluetooth® phone is automatically
connected, the connection check is
displayed.
zYou can select the state of “Display tele-
phone status”.
On: The status is displayed.
Off: The status is not displayed.
1Touch “Display audio player status”.
2Touch “On” or “Off”.
3Touch “OK”.
EDITING THE PASSCODE
CHANGING THE DISPLAY
PHONE STATUS
CHANGING THE DISPLAY
AUDIO PLAYER STATUS
86
1. SETUP OPERATION
zWhen you start your vehicle and the
Bluetooth® portable audio player is
automatically connected, the connection
check is displayed.
zYou can select the state of “Display
audio player status”.
On: The status is displayed.
Off: The status is not displayed.
1Touch “Default”.
zIf the state of “Bluetooth* power” is
changed from “Off” into “On”, Bluetooth®
connection will begin.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
INITIALIZING THE Bluetooth®
SETTINGS
You can initialize the settings.
FCC ID: BABFT0032
A
IC : 2024B-FT0032
A
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
L'utilisation de ce dispositif est autorisée seulement aux deux conditions
suivantes : (1) il ne doit pas produire de brouillage, et (2) l'utilisateur du
dispositif doit être prêt à accepter tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre le fonctionnement
du dispositif.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
Radio Frequency Radiation Exposure
This equipment complies with FCC radiation exposure limits set
forth for uncontrolled equipment and meets the FCC radio
frequency (RF) Exposure Guidelines in Supplement C to OET65.
This equipment has very low levels of RF energy that it
deemed to comply without maximum permissive
exposure evaluation (MPE).
But it is desirable that it should be installed and
operated with at least 20cm
and more between the radiator and person's body
(excluding extremities: hands, wrists, feet and ankles).
This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
WARNING
CAUTION
FUJITSU TEN CONFIDENTIAL