DENSO TEN FT0086A Car Audio User Manual 27 8 Operation Manual for Bluetooth

Fujitsu Ten Limited Car Audio 27 8 Operation Manual for Bluetooth

(Short-Term Confidential) User Manual

FUJITSU TEN CONFIDENTIAL【FT0086A】 Operation Manual for Bluetooth Button Function for Panel Switch & Steering SwitchBluetooth Setup: press "TALK" button on steering switchCall: press "OFF HOOK" on steering switchEnd Call: press "ON HOOK" on steering switchRewind ： long press "DOWN" button on steering switch or panelFast Forward ： long press "UP" button on steering switch or panelTrack Down ： short press "DOWN" button on steering switch or panelTrack Up ： short press "UP"button on steering switch or panelMenu： press "Preset 6 (MENU)" button on the panelMode: press "MODE" on steering switch or "MEDIA" on panelMute: press "MUTE" button on steering switchRandom : press "RDM" button on panelRepeat : press "RPT" button on panelSelect ： press "SOUND" buttonVolume Up ： press "VOL +" on steering switch or turn clockwise the "PWR" knob on the panelVolume Down ： press "VOL -" button on steering switch or turn counterclockwise the "PWR" knob on the panel.dummyPCH2DSPCD ModeFM/AM Mode(DAB)TAMEDIA Selection[PUSH]Power ON/OFF[Rotate]Volume Up/DownPCH1PCH3 PCH4 PCH5PCH6MENUASRAD(PTY)RPT(AF)[PUSH]Song Setting[Rotate]Tune / FolderMUTEDOWNUPCD Eject① Panel Swich(example)
FUJITSU TEN CONFIDENTIALBluetooth OperationBT Connection[Steering Switch] Push "TALK" buttonPush "SOUND" buttonPush "SOUND" buttonSETUPSETUPTALKThis display will automatically appear after successful BT connection Note: While searching for the device, these screen displays are interchanging. Bluetooth logo will be displayed when BT connection is successful.SETUPSETUPSETUPSETUP
FUJITSU TEN CONFIDENTIALAuto Transfer SettingPress "SOUND" button to select setting confirmationSETUPSETUPSETUPSETUPSETUPSETUPTurn the "SOUND" knob to select Transfer SettingThis display will automatically appear after Auto Transfer confirmation.After selecting (Yes/ No), press "SOUND" button
FUJITSU TEN CONFIDENTIALReturning to Normal Screen Display [Panel Switch] Turn "SOUND" knob [Steering Switch] Push "ON HOOK" button Press"SOUND" button Turn "SOUND" knob Press "SOUND" buttonSETUPSETUPSETUPSETUPSETUPAudioMode(example)ON HOOKORShortcut
FUJITSU TEN CONFIDENTIALBluetooth Audio OperationSwitching to BT Audio Mode [Panel Switch] Select "BT-A" by pressing "MEDIA" button [Steering Switch] Select "BT-A" by pressing "MODE" buttonSETUPSETUPSETUPMODE
FUJITSU TEN CONFIDENTIALBluetooth Call OperationOutgoing Call [Steering SW] Push "OFF HOOK" button Press "SOUND" buttonTurn "SOUND" knob to select the name initials from phonebook.Push "SOUND" button to select the name's initialAfter selecting the name of person, press SOUND button SETUPSETUPSETUPSETUPOFF HOOKInitialA:NamesthatstartswithletterA
FUJITSU TEN CONFIDENTIALSETUPSETUPSETUPSETUPWhenCallhasbeenanswered.Whencallisrejectedornotanswered,screendisplaywillgobacktopreviousmode.Press "ON HOOK" on steering switch to end the call.When phone converation is finished, screen display will go back to the previous mode.
FUJITSU TEN CONFIDENTIALIncoming Call Push "OFF HOOK" button to answer the call Push "ON HOOK" button to reject callScreendisplaywhenthereisincomingcallAfterafewseconds,thenameofthecallerwillbedisplayedAnswerthecall RejectthecallSETUPOFF HOOK ON HOOKSETUPSETUPSETUPScreen display will go back to previous mode.Press "ON HOOK" on steering switch to end the call.When phone converation is finished, screen display will go back to the previous mode.
FCC ID: BABFT0086A CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20cm and more between the radiator and person's body in normal use position. Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu